Chlorhexidine digluconate mouthwash alters the oral microbial composition and affects the prevalence of antimicrobial resistance genes

Introduction

Chlorhexidine (CHX) is a commonly used antiseptic in situations of limited oral hygiene ability such as after periodontal surgery. However, CHX is also considered as a possible factor in the emergence of cross-resistance to antibiotics. The aim of this study was to analyze the changes in the oral microbiota and the prevalence of antimicrobial resistance genes (ARGs) due to CHX treatment.

Materials and methods

We analyzed the oral metagenome of 20 patients who applied a 0.2% CHX mouthwash twice daily for 4 weeks following periodontal surgical procedures. Saliva and supragingival plaque samples were examined before, directly after 4 weeks, and another 4 weeks after discontinuing the CHX treatment.

Results

Alpha-diversity decreased significantly with CHX use. The Bray-Curtis dissimilarity increased in both sample sites and mainly streptococci showed a higher relative abundance after CHX treatment. Although no significant changes of ARGs could be detected, an increase in prevalence was found for genes that encode for tetracycline efflux pumps.

Conclusion

CHX treatment appears to promote a caries-associated bacterial community and the emergence of tetracycline resistance genes. Future research should focus on CHX-related changes in the microbial community and whether the discovered tetracycline resistance genes promote resistance to CHX.

Influence of Dead Cells Killed by Industrial Biocides (BAC and DBNPA) on Biofilm Formation

Industrial biocides aim to keep water systems microbiologically controlled and to minimize biofouling. However, the resulting dead cells are usually not removed from the water streams and can influence the growth of the remaining live cells in planktonic and sessile states. This study aims to understand the effect of dead Pseudomonas fluorescens cells killed by industrial biocides-benzalkonium chloride (BAC) and 2,2-dibromo-3-nitrilopropionamide (DBNPA)-on biofilm formation. Additionally, the effect of different dead/live cell ratios (50.00% and 99.99%) was studied. The inoculum was recirculated in a Parallel Plate Flow Cell (PPFC). The overall results indicate that dead cells greatly affect biofilm properties. Inoculum with DBNPA-dead cells led to more active (higher ATP content and metabolic activity) and thicker biofilm layers in comparison to BAC-dead cells, which seems to be linked to the mechanism of action by which the cells were killed. Furthermore, higher dead cell ratios (99.99%) in the inoculum led to more active (higher culturability, metabolic activity and ATP content) and cohesive/compact and uniformly distributed biofilms in comparison with the 50.00% dead cell ratio. The design of future disinfection strategies must consider the contribution of dead cells to the biofilm build-up, as they might negatively affect water system operations.

Acetylcholinesterase- and Butyrylcholinesterase-Based Biosensors for the Detection of Quaternary Ammonium Biocides in Food Industry

A sensitive and robust electrochemical cholinesterase-based sensor was developed to detect the quaternary ammonium (QAs) biocides most frequently found in agri-food industry wash waters: benzalkonium chloride (BAC) and didecyldimethylammonium chloride (DDAC). To reach the maximum residue limit of 28 nM imposed by the European Union (EU), two types of cholinesterases were tested, acetylcholinesterase (AChE, from Drosophila melanogaster) and butyrylcholinesterase (BChE, from horse serum). The sensors were designed by entrapping AChE or BChE on cobalt phthalocyanine-modified screen-printed carbon electrodes. The limits of detection (LOD) of the resulting biosensors were 38 nM for DDAC and 320 nM for BAC, using, respectively, AChE and BChE. A simple solid-phase extraction step was used to concentrate the samples before biosensor analysis, allowing for the accurate determination of DDAC and BAC in tap water with limits of quantification (LOQ) as low as 2.7 nM and 5.3 nM, respectively. Additional assays demonstrated that the use of a phosphotriesterase enzyme allows for the total removal of interferences due to the possible presence of organophosphate insecticides in the sample. The developed biosensors were shown to be stable during 3 months storage at 4 °C.

Burden of biocide resistance among multidrug-resistant bacteria isolated from various clinical specimens in a tertiary care hospital

BACKGROUND

Most studies on biocide resistance and its genetic determinants arise from environmental or food-borne microbial isolates and only a few from clinically relevant isolates.

OBJECTIVES

This study determines the proportion of biocide resistance against five commonly used biocides and detects biocide resistance genes among MDR bacterial isolates using PCR.

METHODS

Consecutive MDR isolates (n ​= ​180) were included (30 each of Escherichia coli, Klebsiella pneumoniae, Pseudomonas aeruginosa, Acinetobacter baumannii, Staphylococcus aureus, and Enterococcus species) from clinical specimens of various inpatient units at JIPMER. The isolates were challenged at 0.5,1 and 2 Macfarland (McF) inoculum with discrete dilutions of disinfectants. The minimum bactericidal concentrations (MBCs) for 70% Ethanol, 1.5% Cresol, 2% Glutaraldehyde, 1% Cetrimide, and 1% Chlorhexidine were determined for the isolates using ATCC reference strains as controls. PCR was performed targeting qac A/B, G; smr; and nfx B genes.

RESULTS

For all biocides, MDR isolates had MBCs less than the maximum MBCs of ATCC strains. For MDR K. pneumoniae, A. baumannii, and P. aeruginosa, the highest MBCs of chlorhexidine and cetrimide were ≥75 and ​≥ ​150 ​μg/ml respectively at 0.5 McF inoculum; whereas these organisms grew at higher inoculum (2McF) even at commercially recommended biocidal concentration (1%) corresponding to 750 and 1500 ​μg/ml of chlorhexidine and cetrimide respectively. Meanwhile, the highest MBCs of MDR E. coli were 75 and 150 ​μg/ml for chlorhexidine and cetrimide respectively. Interestingly, the Gram-positive cocci survived the action of up to 35% ethanol. The nfxB and qacG genes were detected in 87% and 6.67% of MDR P. aeruginosa isolates respectively with no biocide resistance genes detected among the other organisms.

CONCLUSIONS

Biocide dilutions challenged with higher inoculum indicated a narrow margin of effectiveness for certain biocides. Although a significant proportion of clinical MDR isolates of P. aeruginosa harbored biocide resistance genes, this finding had no phenotypic correlation.

Current Understanding of Potential Linkages between Biocide Tolerance and Antibiotic Cross-Resistance

Antimicrobials (e.g., antibiotics and biocides) are invaluable chemicals used to control microbes in numerous contexts. Because of the simultaneous use of antibiotics and biocides, questions have arisen as to whether environments commonly treated with biocides (e.g., hospitals, food processing, wastewater, agriculture, etc.) could act as a reservoir for the development of antibiotic cross-resistance. Theoretically, cross-resistance could occur if the mechanism of bacterial tolerance to biocides also resulted in antibiotic resistance. On the other hand, biocides would likely present a higher evolutionary barrier to the development of resistance given the different modes of action between biocides and antibiotics and the broad-based physicochemical effects associated with most biocides. Published studies have shown that the induction of biocide tolerance in a laboratory can result in cross-resistance to some antibiotics, most commonly hypothesized to be due to efflux pump upregulation. However, testing of environmental isolates for biocide tolerance and antibiotic cross-resistance has yielded conflicting results, potentially due to the lack of standardized testing. In this review, we aim to describe the state of the science on the potential linkage between biocide tolerance and antibiotic cross-resistance. Questions still remain about whether the directed evolution of biocide tolerance and the associated antibiotic cross-resistance in a laboratory are or are not representative of real-world settings. Thus, research should continue to generate informative data to guide policies and preserve these tools' utility and availability.

The culmination of multidrug-resistant efflux pumps vs. meager antibiotic arsenal era: Urgent need for an improved new generation of EPIs

Efflux pumps function as an advanced defense system against antimicrobials by reducing the concentration of drugs inside the bacteria and extruding the substances outside. Various extraneous substances, including antimicrobials, toxic heavy metals, dyes, and detergents, have been removed by this protective barrier composed of diverse transporter proteins found in between the cell membrane and the periplasm within the bacterial cell. In this review, multiple efflux pump families have been analytically and widely outlined, and their potential applications have been discussed in detail. Additionally, this review also discusses a variety of biological functions of efflux pumps, including their role in the formation of biofilms, quorum sensing, their survivability, and the virulence in bacteria, and the genes/proteins associated with efflux pumps have also been explored for their potential relevance to antimicrobial resistance and antibiotic residue detection. A final discussion centers around efflux pump inhibitors, particularly those derived from plants.

N-halamine surface coating for mitigation of biofilm and microbial contamination in water systems for space travel

A copolymer termed HASL produced from monomeric units of 2-acrylamido-2-methyl-1-(5-methylhydantoinyl)propane (HA) and of 3-(trimethoxysilyl)propyl methacrylate (SL) has been coated onto stainless steel and Inconel™ substrates, which upon halogenation with either aqueous oxidative chlorine or bromine, became antimicrobial. It has been demonstrated that the halogenated stainless steel and Inconel™ substrates were effective in producing 6 to 7 log inactivations of Staphylococcus aureus and Escherichia coli O157:H7 within about 10 min, and in prevention of Pseudomonas aeruginosa biofilm formation over a period of at least 72 h on the stainless steel substrates. Upon loss of halogen, the HASL coating could be re-charged with aqueous halogen. The HASL coating was easily applied to the substrates via a simple dip-coating method and was reasonably stable to contact with water. Both chlorinated substrates could be loaded with at least 6 × 1016 oxidative Cl atoms per cm2 and maintained a loading of greater than 1 × 1016 chlorine atoms per cm2 for a period of 3-7 days while agitated in aqueous solution. After loss of chlorine to a level below 1 × 1016 atoms per cm2, the substrates could be recharged to the 6 × 1016 Cl atoms per cm2 level for at least 5 times over a 28 day period. The new antimicrobial coating technology has potential for use in a variety of important applications, particularly for water treatment and storage on spacecraft.

Efflux-mediated tolerance to cationic biocides, a cause for concern?

AbstractWith an increase in the number of isolates resistant to multiple antibiotics, infection control has become increasingly important to help combat the spread of multi-drug-resistant pathogens. An important component of this is through the use of disinfectants and antiseptics (biocides). Antibiotic resistance has been well studied in bacteria, but little is known about potential biocide resistance genes and there have been few reported outbreaks in hospitals resulting from a breakdown in biocide effectiveness. Development of increased tolerance to biocides has been thought to be more difficult due to the mode of action of biocides which affect multiple cellular targets compared with antibiotics. Very few genes which contribute towards increased biocide tolerance have been identified. However, the majority of those that have are components or regulators of different efflux pumps or genes which modulate membrane function/modification. This review will examine the role of efflux in increased tolerance towards biocides, focusing on cationic biocides and heavy metals against Gram-negative bacteria. As many efflux pumps which are upregulated by biocide presence also contribute towards an antimicrobial resistance phenotype, the role of these efflux pumps in cross-resistance to both other biocides and antibiotics will be explored.

Priming with biocides: A pathway to antibiotic resistance?

AIMS

To investigate the priming effects of sub-inhibitory concentrations of biocides on antibiotic resistance in bacteria.

METHODS AND RESULTS

Escherichia coli, Pseudomonas aeruginosa and Staphylococcus aureus were exposed to sub-inhibitory concentrations of biocides via a gradient plate method. Minimum inhibitory concentration (MIC) and antibiotic susceptibility were determined, and efflux pump inhibitors (thioridazine and chlorpromazine) were used to investigate antibiotic resistance mechanism(s). Escherichia coli displayed a twofold increase in MIC (32-64 mg l-1 ) to H2 O2 which was stable after 15 passages, but lost after 6 weeks, and P. aeruginosa displayed a twofold increase in MIC (64-128 mg l-1 ) to BZK which was also stable for 15 passages. There were no other tolerances observed to biocides in E. coli, P. aeruginosa or S. aureus; however, stable cross-resistance to antibiotics was observed in the absence of a stable increased tolerance to biocides. Sixfold increases in MIC to cephalothin and fourfold to ceftriaxone and ampicillin were observed in hydrogen peroxide primed E. coli. Chlorhexidine primed S. aureus showed a fourfold increase in MIC to oxacillin, and glutaraldehyde-primed P. aeruginosa showed fourfold (sulphatriad) and eightfold (ciprofloxacin) increases in MIC. Thioridazine increased the susceptibility of E. coli to cephalothin and cefoxitin by fourfold and twofold, respectively, and both thioridazine and chlorpromazine increased the susceptibility S. aureus to oxacillin by eightfold and fourfold, respectively.

CONCLUSIONS

These findings demonstrate that sub-inhibitory concentrations of biocides can prime bacteria to become resistant to antibiotics even in the absence of stable biocide tolerance and suggests activation of efflux mechanisms may be a contributory factor.

SIGNIFICANCE AND IMPACT OF THE STUDY

This study demonstrates the effects of low-level exposure of biocides (priming) on antibiotic resistance even in the absence of obvious increased biocidal tolerance.

Crystal structures of bacterial small multidrug resistance transporter EmrE in complex with structurally diverse substrates

Proteins from the bacterial small multidrug resistance (SMR) family are proton-coupled exporters of diverse antiseptics and antimicrobials, including polyaromatic cations and quaternary ammonium compounds. The transport mechanism of the Escherichia coli transporter, EmrE, has been studied extensively, but a lack of high-resolution structural information has impeded a structural description of its molecular mechanism. Here, we apply a novel approach, multipurpose crystallization chaperones, to solve several structures of EmrE, including a 2.9 Å structure at low pH without substrate. We report five additional structures in complex with structurally diverse transported substrates, including quaternary phosphonium, quaternary ammonium, and planar polyaromatic compounds. These structures show that binding site tryptophan and glutamate residues adopt different rotamers to conform to disparate structures without requiring major rearrangements of the backbone structure. Structural and functional comparison to Gdx-Clo, an SMR protein that transports a much narrower spectrum of substrates, suggests that in EmrE, a relatively sparse hydrogen bond network among binding site residues permits increased sidechain flexibility.

Persistence against benzalkonium chloride promotes rapid evolution of tolerance during periodic disinfection

Biocides used as disinfectants are important to prevent the transmission of pathogens, especially during the current antibiotic resistance crisis. This crisis is exacerbated by phenotypically tolerant persister subpopulations that can survive transient antibiotic treatment and facilitate resistance evolution. Here, we show that E. coli displays persistence against a widely used disinfectant, benzalkonium chloride (BAC). Periodic, persister-mediated failure of disinfection rapidly selects for BAC tolerance, which is associated with reduced cell surface charge and mutations in the lpxM locus, encoding an enzyme for lipid A biosynthesis. Moreover, the fitness cost incurred by BAC tolerance turns into a fitness benefit in the presence of antibiotics, suggesting a selective advantage of BAC-tolerant mutants in antibiotic environments. Our findings highlight the links between persistence to disinfectants and resistance evolution to antimicrobials.

Molecular mechanism of proton-coupled ligand translocation by the bacterial efflux pump EmrE

The current surge in bacterial multi-drug resistance (MDR) is one of the largest challenges to public health, threatening to render ineffective many therapies we rely on for treatment of serious infections. Understanding different factors that contribute to MDR is hence crucial from the global “one health” perspective. In this contribution, we focus on the prototypical broad-selectivity proton-coupled antiporter EmrE, one of the smallest known ligand transporters that confers resistance to aromatic cations in a number of clinically relevant species. As an asymmetric homodimer undergoing an “alternating access” protomer-swap conformational change, it serves as a model for the mechanistic understanding of more complex drug transporters. Here, we present a free energy and solvent accessibility analysis that indicates the presence of two complementary ligand translocation pathways that remain operative in a broad range of conditions. Our simulations show a previously undescribed desolvated apo state and anticorrelated accessibility in the ligand-bound state, explaining on a structural level why EmrE does not disrupt the pH gradient through futile proton transfer. By comparing the behavior of a number of model charged and/or aromatic ligands, we also explain the origin of selectivity of EmrE towards a broad class of aromatic cations. Finally, we explore unbiased pathways of ligand entry and exit to identify correlated structural changes implicated in ligand binding and release, as well as characterize key intermediates of occupancy changes.

EmrE is a prototypical bacterial multidrug transporter (MDR) that confers resistance to drugs and antiseptics. Due to its structural simplicity, its mechanism of ligand recognition and translocation are relevant for a wide class of transporters. This proton-coupled antiport expels aromatic cations from the cytoplasm using the alternating access mechanism, achieving impressive levels of efficiency and robustness. Our protonation-specific free energy profiles, Grotthuss wire analyses and equilibrium simulations show how a deceivingly simple system can exchange ions with robustness and precision, hopefully inspiring rational efforts to design new MDR inhibitors.

Efficacy of frontline chemical biocides and disinfection approaches for inactivating SARS-CoV-2 variants of concern that cause coronavirus disease with the emergence of opportunities for green eco-solutions

The emergence of severe acute respiratory disease (SARS-CoV-2) variants that cause coronavirus disease is of global concern. Severe acute respiratory disease variants of concern (VOC) exhibiting greater transmissibility, and potentially increased risk of hospitalization, severity and mortality, are attributed to molecular mutations in outer viral surface spike proteins. Thus, there is a reliance on using appropriate counter-disease measures, including non-pharmaceutical interventions and vaccination. The best evidence suggests that the use of frontline biocides effectively inactivate coronavirus similarly, including VOC, such as 202012/01, 501Y.V2 and P.1 that have rapidly replaced the wild-type variant in the United Kingdom, South Africa and Brazil, respectively. However, this review highlights that efficacy of VOC-disinfection will depend on the type of biocide and the parameters governing the activity. VOC are likely to be similar in size to the wild-type strain, thus implying that existing guidelines for use and re-use of face masks post disinfection remain relevant. Monitoring to avoid injudicious use of biocides during the coronavirus disease era is required as prolonged and excessive biocide usage may negatively impact our receiving environments; thus, highlighting the potential for alternative more environmental-friendly sustainable biocide solutions. Traditional biocides may promote cross-antimicrobial resistance to antibiotics in problematical bacteria. The existing filtration efficacy of face masks is likely to perform similarly for VOC due to similar viral size; however, advances in face mask manufacturing by way incorporating new anti-viral materials will potentially enhance their design and functionality for existing and potential future pandemics.

Antimicrobial Activity of Gemini Surfactants with Ether Group in the Spacer Part

Due to their large possibility of the structure modification, alkylammonium gemini surfactants are a rapidly growing class of compounds. They exhibit significant surface, aggregation and antimicrobial properties. Due to the fact that, in order to achieve the desired utility effect, the minimal concentration of compounds are used, they are in line with the principle of greenolution (green evolution) in chemistry. In this study, we present innovative synthesis of the homologous series of gemini surfactants modified at the spacer by the ether group, i.e., 3-oxa-1,5-pentane-bis(N-alkyl-N,N-dimethylammonium bromides). The critical micelle concentrations were determined. The minimal inhibitory concentrations of the synthesized compounds were determined against bacteria Escherichia coli ATCC 10536 and Staphylococcus aureus ATCC 6538; yeast Candida albicans ATCC 10231; and molds Aspergillus niger ATCC 16401 and Penicillium chrysogenum ATCC 60739. We also investigated the relationship between antimicrobial activity and alkyl chain length or the nature of the spacer. The obtained results indicate that the synthesized compounds are effective microbicides with a broad spectrum of biocidal activity.

Does the Organism Profile of Periprosthetic Joint Infections Change With a Topical Vancomycin Powder and Dilute Povidone-Iodine Lavage Protocol?

BACKGROUND

While vancomycin powder and dilute povidone-iodine (VIP) is associated with fewer total joint arthroplasty (TJA) periprosthetic joint infections (PJI), its effect on PJI organism profiles is unclear. This study evaluates primary TJA PJI organism profiles before and after the implementation of a VIP protocol.

METHODS

In total, 18,299 primary TJAs performed at a university-affiliated, not-for-profit orthopedic hospital from before (1/2012-12/2013) and after (1/2016-12/2019) a VIP protocol was initiated were reviewed to identify deep PJIs that occurred within 90 days of the index arthroplasty as defined by the Musculoskeletal Infection Society guidelines. Demographics, overall organism incidence (n/TJAs), and relative organism incidence (n/PJIs) from the two cohorts were compared.

RESULTS

In total, 103 TJA PJIs were identified (pre-VIP: 32/3982; VIP: 71/14,317). Following the introduction of VIP, the overall and relative incidence of coagulase-negative staphylococcal TJA PJIs significantly decreased (overall: 0.20% to 0.04%, P = .004; relative: 25.00% to 8.45%, P = .031). In response, the relative incidence of MSSA TJA PJIs significantly increased (18.75% to 40.85%, P = .042). Broken down by arthroplasty type, VIP was associated with a significantly lower overall incidence of coagulase-negative staphylococcal total knee arthroplasty (TKA) PJIs (0.27% to 0.06%, P = .015), a significantly lower overall incidence of MRSA TKA PJIs (0.18% to 0.03%, P = .031), and a nonsignificant decrease in the overall incidence of gram-negative TKA PJIs (0.18% to 0.04%, P = .059). No organism profile changes were found in total hip arthroplasty PJIs.

CONCLUSION

VIP is not associated with more difficult to treat primary TJA PJIs. While promising, these findings require a prospective randomized controlled trial for confirmation.

LEVEL OF EVIDENCE

Level III, Retrospective cohort study.

The potential impact of the COVID-19 pandemic on antimicrobial resistance and antibiotic stewardship

The rapid emergence and spread of antimicrobial resistance continue to kill an estimated 700,000 people annually, and this number is projected to increase ten-fold by 2050. With the lack of data, it is uncertain how the COVID-19 pandemic will affect antimicrobial resistance. Severe disruption of research, innovation, global health programs, and compromised antimicrobial stewardship, infection prevention and control programs, especially in low-and middle-income countries, could affect antimicrobial resistance. However, factors such as strict lockdown, social distancing, vaccination, and the extensive implementation of hand hygiene and face masks, with limited international travel and migration, may also contribute to decreasing AMR. Although the impact of COVID-19 on AMR is global, the adverse effect is likely to be worse in LMICs. In this article, we explore the possible impact of the current pandemic on antibiotic resistance.

The alarming association between antibiotic resistance and reduced susceptibility to biocides in nosocomial MRSA isolates from two regional hospitals in Egypt

Methicillin-resistant Staphylococcus aureus is one of the major clinical problems in hospitals because of its resistance to many antimicrobials. Biocides are used in hospitals to control nosocomial infections. This work aimed to investigate the relationship between the presence of integrons and reduced susceptibility to both biocides and antimicrobials in nosocomial multidrug-resistant (MDR)-MRSA isolates. A total of 114 clinical and eight environmental MRSA isolates were collected from Zagazig University Hospitals and El-Ahrar Educational Hospital, Egypt. These isolates were identified as MRSA by disk diffusion method (DDM) and confirmed by PCR. Susceptibility profile against 12 antibiotics and five biocides was determined by DDM and agar dilution method, respectively. Presence of integrons was investigated by PCR in MDR isolates. Seventy-five clinical and six environmental isolates were MDR and had reduced susceptibility to biocides. Class I integron was detected in plasmid DNA of 34 isolates and genomic DNA of 14 isolates. Meanwhile, class II integron was only detected in plasmid DNA of 10 clinical isolates. This study revealed a high prevalence of MDR-MRSA clinical and environmental isolates, both had reduced susceptibility to investigated biocides. Class I integron was more predominant in plasmid DNA of isolates, indicating that plasmid is a major carrier for integrons that transfer resistance genes. In conclusion, the association between antibiotic resistance and biocides reduced susceptibility is alarming. The selection of curative antibiotic should depend on the antimicrobial susceptibility profile. Furthermore, biocides should always be used at appropriate concentrations to prevent the evolution of resistance and to control the hospital-transmission of MRSA.

Disinfectant and antimicrobial susceptibility studies of the foodborne pathogen Campylobacter jejuni isolated from the litter of broiler chicken houses

Foodborne illness is an ongoing problem worldwide and is caused by bacteria that invade the food chain from the farm, slaughter house, restaurant or grocery, or in the home and can be controlled by strategies using biocides (antiseptics and disinfectants). Susceptibility profiles were determined for 96 Campylobacter jejuni strains obtained in 2011-2012 from broiler chicken house environments to antimicrobials and disinfectants as per the methods of the Clinical and Laboratory Standards Institute and TREK Diagnostics using CAMPY AST Campylobacter plates. Low prevalence of antimicrobial resistance was observed in C. jejuni strains to tetracycline (TET; 21.9%), ciprofloxacin (CIP; 13.5%), and nalidixic acid (NAL; 12.5%). The resistance profiles had a maximum of 3 antimicrobials, CIP-NAL-TET, with TET being the main profile observed. No cross-resistance was observed between antimicrobials and disinfectants. The C. jejuni strains (99%) were resistant to triclosan, 32% were resistant to chlorhexidine, and they all were susceptible to benzalkonium chloride. The strains had low-level minimum inhibitory concentrations (MICs) to the disinfectants P-128, Food Service Sanitizer, F-25 Sanitizer, Final Step 512 Sanitizer, OdoBan, dioctyldimethylammmonium chloride, didecyldimethylammonium chloride (C10AC), benzyldimethyldodecylammonium chloride (C12BAC), and benzyldimethyltetradecylammonium chloride (C14BAC). Intermediate MICs against DC&R, cetylpyridinium bromide hydrate, hexadecylpyridinium chloride, ethylhexadecyldimethylammonium bromide, and hexadecyltrimethylammonium bromide with elevated intermediate MICs against Tek-Trol, benzyldimethylhexadecylammonium chloride, tris(hydroxylmethyl)nitromethane (THN), and formaldehyde. The highest MIC were obtained for povidone-iodine. The components THN and the benzylammonium chlorides C12BAC and C14BAC were responsible for the inhibition by DC&R. The components C10AC and C12BAC may act synergistically causing inhibition of C. jejuni by the disinfectant P-128. The formaldehyde component in DC&R was not effective against C. jejuni compared with the ammonium chloride components. Its use in disinfectants may result in additional unnecessary chemicals in the environment. Didecyldimethylammonium chloride is the most effective ammonium chloride component against C. jejuni.

The structural basis of promiscuity in small multidrug resistance transporters

By providing broad resistance to environmental biocides, transporters from the small multidrug resistance (SMR) family drive the spread of multidrug resistance cassettes among bacterial populations. A fundamental understanding of substrate selectivity by SMR transporters is needed to identify the types of selective pressures that contribute to this process. Using solid-supported membrane electrophysiology, we find that promiscuous transport of hydrophobic substituted cations is a general feature of SMR transporters. To understand the molecular basis for promiscuity, we solved X-ray crystal structures of a SMR transporter Gdx-Clo in complex with substrates to a maximum resolution of 2.3 Å. These structures confirm the family’s extremely rare dual topology architecture and reveal a cleft between two helices that provides accommodation in the membrane for the hydrophobic substituents of transported drug-like cations.

Gdx-Clo is a bacterial transporter from the small multidrug resistance (SMR) family. Here, the authors use solid supported membrane electrophysiology to characterize Gdx-Clo functionally and report crystal structures of Gdx-Clo which confirm the dual topology architecture and offer insight into substrate binding and transport mechanism.

The Household Resistome: Frequency of β-Lactamases, Class 1 Integrons, and Antibiotic-Resistant Bacteria in the Domestic Environment and Their Reduction during Automated Dishwashing and Laundering

Households provide a habitat for bacteria originating from humans, animals, foods, contaminated clothes, or other sources. Thus, bacteria carrying antibiotic resistance genes (ARGs) may be introduced via household members, animals, or the water supply from external habitats into private households and vice versa. Since data on antibiotic resistance (ABR) in the domestic environment are limited, this study aimed to determine the abundance of β-lactamase, mobile colistin resistance, and class 1 integron genes and the correlation of their presence and to characterize phenotypically resistant strains in 54 private households in Germany. Additionally, the persistence of antibiotic-resistant bacteria during automated dishwashing compared to that during laundering was assessed. Shower drains, washing machines, and dishwashers were sampled and analyzed using quantitative real-time PCR. Resistant strains were isolated, followed by identification and antibiotic susceptibility testing using a Vitek 2 system. The results showed a significantly higher relative ARG abundance of 0.2367 ARG copies/16S rRNA gene copies in shower drains than in dishwashers (0.1329 ARG copies/16S rRNA gene copies) and washing machines (0.0006 ARG copies/16S rRNA gene copies). bla _CMY-2, bla _ACT/MIR, and bla _OXA-48 were the most prevalent ARG, and intI1 occurred in 96.3% of the households, while no mcr genes were detected. Several β-lactamase genes co-occurred, and the resistance of bacterial isolates correlated positively with genotypic resistance, with carbapenemase genes dominating across isolates. Antibiotic-resistant bacteria were significantly reduced during automated dishwashing as well as laundering tests and did not differ from susceptible strains. Overall, the domestic environment may represent a potential reservoir of β-lactamase genes and β-lactam-resistant bacteria, with shower drains being the dominant source of ABR.IMPORTANCE The abundance of antibiotic-resistant bacteria and ARGs is steadily increasing and has been comprehensively analyzed in natural environments, animals, foods, and wastewater treatment plants. In this respect, β-lactams and colistin are of particular interest due to the emergence of multidrug-resistant Gram-negative bacteria. Despite the connection of private households to these environments, only a few studies have focused on the domestic environment so far. Therefore, the present study further investigated the occurrence of ARGs and antibiotic-resistant bacteria in shower drains, washing machines, and dishwashers. The analysis of the domestic environment as a potential reservoir of resistant bacteria is crucial to determine whether households contribute to the spread of ABR or may be a habitat where resistant bacteria from the natural environment, humans, food, or water are selected due to the use of detergents, antimicrobial products, and antibiotics. Furthermore, ABR could limit the options for the treatment of infections arising in the domestic environment.

Cetylpyridinium Chloride: Mechanism of Action, Antimicrobial Efficacy in Biofilms, and Potential Risks of Resistance

Antimicrobial resistance is a serious issue for public health care all over the world. While resistance toward antibiotics has attracted strong interest among researchers and the general public over the last 2 decades, the directly related problem of resistance toward antiseptics and biocides has been somewhat left untended. In the field of dentistry, antiseptics are routinely used in professional care, but they are also included in lots of oral care products such as mouthwashes or dentifrices, which are easily available for consumers over-the-counter. Despite this fact, there is little awareness among the dental community about potential risks of the widespread, unreflected, and potentially even needless use of antiseptics in oral care. Cetylpyridinium chloride (CPC), a quaternary ammonium compound, which was first described in 1939, is one of the most commonly used antiseptics in oral care products and included in a wide range of over-the-counter products such as mouthwashes and dentifrices. The aim of the present review is to summarize the current literature on CPC, particularly focusing on its mechanism of action, its antimicrobial efficacy toward biofilms, and on potential risks of resistance toward this antiseptic as well as underlying mechanisms. Furthermore, this work aims to raise awareness among the dental community about the risk of resistance toward antiseptics in general.

Biological Activity of Quaternary Ammonium Salts and Their Derivatives

Besides their positive role, microorganisms are related to a number of undesirable effects, including many diseases, biodeterioration and food spoilage, so when their presence is undesired, they must be controlled. Numerous biocides limiting the development of microorganisms have been proposed, however, in this paper the biocidal and inhibitory activity of quaternary ammonium salts (QASs) and their zwitterionic derivatives is addressed. This paper presents the current state of knowledge about the biocidal activity of QAS and their derivatives. Moreover, the known mechanisms of antimicrobial activity and the problem of emerging resistance to QAS are discussed. The latest trends in the study of surfactants and their potential use are also presented.

Keyboard Contamination in Intensive Care Unit: Is Cleaning Enough? Prospective Research of In Situ Effectiveness of a Tea Tree Oil (KTEO) Film

After the SARS-CoV-2 pandemic, disinfection practices and microbial load reduction have become even more important and rigorous. To determine the contamination of keyboard surface and the relative risk to transfer healthcare-associated pathogens to susceptible patients, as it frequently happens in Intensive Care Unit (ICU), a standard keyboard (SK), a cleanable keyless keyboard (KK) with smooth surface and a standard keyboard coated with a 3 M Tegaderm^® film added with active essential oil (tea tree oil) (KTEO) were tested. S. aureus, including MRSA strains, were detected in ICU, with values ranging from 15% to 57%. Gram negative strains belonging to the Enterobacteriaceae family were also found with values ranging from 14% to 71%. Similar Gram positive and Gram negative strains were found on all surfaces, but with low percentage, and only environmental bacteria were detected using the settling plates method. The Microbial Challenge Test performed on KTEO showed high rates of decrease for all the pathogens with statistical significance both at 24 and 48 h (p = 0.003* and p = 0.040*, respectively). Our results suggest that the use of KTEO may be a feasible strategy for reducing the transmission of pathogens in health care setting and may be complementary to surface cleaning protocols.

Non-antibiotic antimicrobial interventions and antimicrobial stewardship in wound care

Control of wound infection today relies largely on antibiotics, but the continual emergence of antibiotic-resistant microorganisms threatens a return to the pre-antibiotic era when physicians used antiseptics to prevent and manage infection. Some of those antiseptics are still used today, and others have become available. A diverse variety of non-antibiotic antimicrobial interventions are found on modern formularies. Unlike the mode of action of antibiotics, which affect specific cellular target sites of pathogens, many non-antibiotic antimicrobials affect multiple cellular target sites in a non-specific way. Although this reduces the likelihood of selecting for resistant strains of microorganisms, some have emerged and cross-resistance between antibiotics and antiseptics has been detected. With the prospect of a post-antibiotic era looming, ways to maintain and extend our antimicrobial armamentarium must be found. In this narrative review, current and emerging non-antibiotic antimicrobial strategies will be considered and the need for antimicrobial stewardship in wound care will be explained.

Disinfectant and Antimicrobial Susceptibility Profiles of Campylobacter coli Isolated in 1998 to 1999 and 2015 from Swine and Commercial Pork Chops

Susceptibility profiles were determined for 111 Campylobacter coli strains obtained in 1998 to 1999 and 2015 from market age pigs and pork chops against 22 disinfectants and 9 antimicrobials. Resistance to tetracycline (TET) was observed in 44.4% of 1998 to 1999 strains, and the antibiotic resistance profile was TET. But strains obtained in 2015 from swine and retail pork chops had 75% TET resistance and the antibiotic resistance profile was TET, followed by azithromycin-erythromycin-TET-telithromycin-clindamycin. Antimicrobial resistance increased in 2015 strains. All strains were resistant to triclosan, and 84.1% and 95.8% of strains in 1998 to 1999 and 2015, respectively, were chlorhexidine resistant. All strains were susceptible to benzalkonium chloride. There was a shift toward higher susceptibility to chlorhexidine, triclosan, P-128, OdoBan, CPB, and CPC in 2015 swine and pork chop strains compared with 1998 to 1999 strains. The disinfectants Tek-Trol and providone-iodine, tris(hydroxylmethyl)nitromethane (THN) and formaldehyde demonstrated the highest susceptibilities. Didecyldimethylammonium chloride (C10AC) appeared to be about equally effective as benzyldimethyltetradecylammonium chloride (C14BAC) for inhibiting C. coli, and both were more effective than C8AC and C12BAC, but C16BAC was not efficient at inhibiting C. coli. The BACs, C12BAC and C14BAC, were the most effective ingredients in DC&R. Also, C12BAC and C14BAC, or these two in synergy with C10AC were responsible for inhibition of C. coli at high P-128 MICs. No cross-resistance was observed between antibiotics and disinfectants. The continued use of THN and formaldehyde in DC&R should be evaluated since these components are not effective, and their inclusion adds unwanted chemicals in the environment. PRACTICAL APPLICATION: Campylobacter species cause diarrheal disease throughout the world. Disinfectants are often used on the farm, in veterinary medicine, by the food processing industry, in restaurants, and in consumer's homes. Limited information is available in the literature showing how disinfectants or disinfectant components may affect the many different foodborne pathogens, and, specifically, Campylobacter coli studied here. The knowledge generated in this study concerning the interactions of a broad array of disinfectants against C. coli may well affect the types of disinfectants and disinfectant formulations allowable for use by medical personnel, producers, food processors, restaurants, and consumers.

Investigation of resistance of Salmonella spp. isolated from products and raw material of animal origin (swine and poultry)to antibiotics and disinfectants

ABSTRACT The genus Salmonella spp. Has worldwide geographical distribution, and represents a potential risk both to animal and human health. Inadequate use as well as continuous exposure to antibiotics and disinfectants might lead to the appearance of resistance of these microorganisms to antimicrobial compounds. The aims of this study were to investigate the occurrence of resistance in Salmonella spp., isolated from products and raw material of animal origin (swine and poultry), to antibiotics and disinfectants, and check whether the phenomenon of simultaneous resistance to disinfectants occurs among the antibiotic-resistant isolates. The test of susceptibility to antimicrobials (TSA) applied in 134 isolates indicated that 51 (38%) were resistant to at least one of the eight antibiotics used, and 28 (55%) of resistant isolates were multi-resistant. Resistant isolates were submitted to the test of quantitative suspension against four concentrations of disinfectants in three contact times, and the result was compared with that of the reference strain (Salmonella Choleraesuis ATCC 10.708). While the reference strain was sensitive considering the highest concentration (200 ppm) and the lowest contact time (5 min) as indicators, 12 (24%) isolates were resistant to cetyltrimethylammonium chloride (ammonia quaternary); the reference strain was resistant to chlorhexidine, which also occurred with 22 (43%) of the isolates; similar to the reference strain, all isolates were sensitive/inactivated by sodium hypochlorite and iodophore. There were no significant relations of simultaneous resistance between the antibiotics and the disinfectants tested.

Resistance of Bacteria to Biocides

Biocides and formulated biocides are used worldwide for an increasing number of applications despite tightening regulations in Europe and in the United States. One concern is that such intense usage of biocides could lead to increased bacterial resistance to a product and cross-resistance to unrelated antimicrobials including chemotherapeutic antibiotics. Evidence to justify such a concern comes mostly from the use of health care-relevant bacterial isolates, although the number of studies of the resistance characteristics of veterinary isolates to biocides have increased the past few years. One problem remains the definition of "resistance" and how to measure resistance to a biocide. This has yet to be addressed globally, although the measurement of resistance is becoming more pressing, with regulators both in Europe and in the United States demanding that manufacturers provide evidence that their biocidal products will not impact on bacterial resistance. Alongside in vitro evidence of potential antimicrobial cross-resistance following biocide exposure, our understanding of the mechanisms of bacterial resistance and, more recently, our understanding of the effect of biocides to induce a mechanism(s) of resistance in bacteria has improved. This article aims to provide an understanding of the development of antimicrobial resistance in bacteria following a biocide exposure. The sections provide evidence of the occurrence of bacterial resistance and its mechanisms of action and debate how to measure bacterial resistance to biocides. Examples pertinent to the veterinary field are used where appropriate.

Effect of post-harvest interventions on surficial carrot bacterial community dynamics, pathogen survival, and antibiotic resistance

Strategies to mitigate antibiotic-resistant bacteria (ARB), including human pathogens, on raw vegetables are needed to reduce incidence of resistant infections. The objective of this research was to determine the effectiveness of standard post-harvest interventions, sanitizer washing and cold storage, to reduce ARB, including antibiotic resistant strains of the human pathogen E. coli O15:H7 and a common spoilage bacterium Pseudomonas, on raw carrots. To provide a background inoculum representing potential pre-harvest carryover of ARB, carrots were dip-inoculated in dairy cow manure compost slurry and further inoculated with known ARB. Inoculated carrots were washed with one of three treatments: sodium hypochlorite (50 ppm free chlorine), peroxyacetic acid (40 ppm peroxyacetic acid; 11.2% hydrogen peroxide), tap water (no sanitizer), or no washing (control). Washed carrots were air dried, packaged and stored at 10 °C for 7d or 2 °C for up to 60 d. Enumeration was performed using total heterotrophic plate counts (HPC), HPCs on antibiotic-containing media ("ARBs"), E. coli O157:H7, and Pseudomonas sp. immediately after washing (0 d) and after 7 d of storage. In addition to the cultured bacteria, changes to the surficial carrot microbiota were profiled by sequencing bacterial 16S rRNA gene amplicons to determine the effect of sanitizer wash, storage temperature, and time of storage (0, 1, 7, 14 and 60 d). Storage temperature, addition of a sanitizer during wash, and duration of storage significantly affected the bacterial microbiota (Wilcoxon, p < 0.05). Inclusion of either sanitizer in the wash water significantly reduced the log CFU/g of E. coli O157:H7 and Pseudomonas sp., as well as HPCs enumerated on cefotaxime- (10 μg/ml), sulfamethoxazole- (100 μg/ml), or tetracycline (3 μg/ml) supplemented media compared to the unwashed control (ANOVA, p < 0.05). However, no significant reductions to bacteria resistant to vancomycin or clindamycin occurred after washing and storage. Members of the Proteobactetria, Firmicutes, Actinobacteria, Planctomycetes, and Acidobacteria comprised the bacterial carrot microbiota. The diversity of the carrot microbiota was significantly affected by the temperature of storage and by extended storage (60 d), when spoilage began to occur. There were no significant differences to the relative abundance of bacterial groups associated with the type of sanitizer used for washing. Results of this study indicate that inclusion of a sanitizer in wash water, followed by storage at 2 °C, might be an effective strategy to prevent re-growth of pathogenic E. coli O157:H7 and reduce levels of bacteria resistant to certain antibiotics on carrots.

Distribution of biocide resistant genes and biocides susceptibility in multidrug-resistant Klebsiella pneumoniae, Pseudomonas aeruginosa and Acinetobacter baumannii - A first report from the Kingdom of Saudi Arabia

PURPOSES

The aim of this study was to determine the frequency of biocide resistant genes, qacA, qacE and cepA in multidrug resistant (MDR) bacteria: Klebsiella pneumoniae, Pseudomonas aeruginosa and Acinetobacter baumannii and to correlate the presence or absence of resistant genes with biocides susceptibility.

MATERIALS AND METHODS

The study included 44 MDR K. pneumoniae, P. aeruginosa and A. baumannii microorganisms. The bacteria were screened for the presence of biocide resistant genes by the polymerase chain reaction (PCR) method. The test organisms were isolated from various clinical specimens in the Qassim region, Saudi Arabia. The in vitro susceptibility tests of the three biocides (benzalkonium chloride, cetrimide and chlorhexidine gluconate) were studied against the test isolates by broth microdilution method following Clinical and Laboratory Standards Institute guidelines.

RESULTS

With the distribution of biocide resistant genes in K. pneumoniae, all 9 isolates (100%) possessed cepA; 4 (44.4%) and 1 (11.1%) isolate contained qacA and qacE genes respectively. Among 24 isolates of A. baumannii tested, cepA, qacA and qacE genes were found in 54.2%, 16.7% and 33.3% of isolates respectively. Among 11 P. aeruginosa isolates, 63.6% contained cepA gene, 18.2% contained qacE genes, and none of the isolates harboured qacA gene. There was no significant correlation between presence or absence of biocide resistant genes and high MIC values of the test isolates (p≥0.2).

CONCLUSION

Our observations imply that there was no significant correlation between presence or absence of biocide resistant genes and MICs observed in MDR K. pneumoniae, P. aeruginosa and A. baumannii. Further studies are required to find to confirm the trend of reduced susceptibility to biocides of problematic nosocomial pathogens.

Reduced Chlorhexidine and Daptomycin Susceptibility in Vancomycin-Resistant Enterococcus faecium after Serial Chlorhexidine Exposure

Vancomycin-resistant Enterococcus faecium strains (VREfm) are critical public health concerns because they are among the leading causes of hospital-acquired bloodstream infections. Chlorhexidine (CHX) is a bisbiguanide cationic antiseptic that is routinely used for patient bathing and other infection control practices. VREfm are likely frequently exposed to CHX; however, the long-term effects of CHX exposure have not been studied in enterococci. In this study, we serially exposed VREfm to increasing concentrations of CHX for a period of 21 days in two independent experimental evolution trials. Reduced CHX susceptibility emerged (4-fold shift in CHX MIC). Subpopulations with reduced daptomycin (DAP) susceptibility were detected, which were further analyzed by genome sequencing and lipidomic analysis. Across the trials, we identified adaptive changes in genes with predicted or experimentally confirmed roles in chlorhexidine susceptibility (efrE), global nutritional stress response (relA), nucleotide metabolism (cmk), phosphate acquisition (phoU), and glycolipid biosynthesis (bgsB), among others. Moreover, significant alterations in membrane phospholipids were identified for some populations with reduced DAP susceptibility. Our results are clinically significant because they identify a link between serial subinhibitory CHX exposure and reduced DAP susceptibility. In addition, the CHX-induced genetic and lipidomic changes described in this study offer new insights into the mechanisms underlying the emergence of antibiotic resistance in VREfm.

Impact of Exposure of Methicillin-Resistant Staphylococcus aureus to Polyhexanide In Vitro and In Vivo

Methicillin-resistant Staphylococcus aureus (MRSA) resistant to decolonization agents such as mupirocin and chlorhexidine increases the need for development of alternative decolonization molecules. The absence of reported severe adverse reactions and bacterial resistance to polyhexanide makes it an excellent choice as a topical antiseptic. In the present study, we evaluated the in vitro and in vivo capacity to generate strains with reduced polyhexanide susceptibility and cross-resistance with chlorhexidine and/or antibiotics currently used in clinic. Here we report the in vitro emergence of reduced susceptibility to polyhexanide by prolonged stepwise exposure to low concentrations in broth culture. Reduced susceptibility to polyhexanide was associated with genomic changes in the mprF and purR genes and with concomitant decreased susceptibility to daptomycin and other cell wall-active antibiotics. However, the in vitro emergence of reduced susceptibility to polyhexanide did not result in cross-resistance to chlorhexidine. During in vivo polyhexanide clinical decolonization treatment, neither reduced polyhexanide susceptibility nor chlorhexidine cross-resistance was observed. Together, these observations suggest that polyhexanide could be used safely for decolonization of carriers of chlorhexidine-resistant S. aureus strains; they also highlight the need for careful use of polyhexanide at low antiseptic concentrations.

Phenotypic chlorhexidine and triclosan susceptibility in clinical Staphylococcus aureus isolates in Australia

Antiseptics such as chlorhexidine gluconate and triclosan are widely used in healthcare settings for both skin antisepsis and decolonisation of Staphylococcus aureus. We determined the minimum inhibitory concentration (MIC) of 198 methicillin susceptible and resistant Staphylococcus aureus clinical isolates to both chlorhexidine and triclosan using an agar dilution method. Of these, 10% (19/198) showed a raised MIC to chlorhexidine and 3% (6/198) showed an elevated MIC to triclosan. The multilocus sequence type (MLST) of each isolate was predicted using a binary method, and although ST93-MRSA-IV was the most common, ST22-MRSA-IV was shown to have statistically higher chlorhexidine MIC values compared with non ST22-MRSA-IV isolates (z = -8.7, p < 0.01). Additionally, isolates from patients known to have failed decolonisation were included and did not demonstrate elevated MIC to the decolonisation antiseptic. Monitoring for non-susceptibility of clinical isolates to biocides is important to determine trends, and may have clinical implications in terms of sub-lethal concentration in residues and concomitant antibiotic resistance.

Integron occurrence is linked to reduced biocide susceptibility in multidrug resistant Pseudomonas aeruginosa

OBJECTIVE

Integrons are gene acquisition systems commonly found in bacterial genomes that play a major role in the dissemination of resistance to antibiotics. This work aimed to study the relationship between the presence of integrons and the reduced susceptibility of multidrug-resistant (MDR) Pseudomonas aeruginosa isolates towards different groups of biocides.

METHODS

The antimicrobial susceptibility patterns of 104 clinical isolates were determined against different antibiotics by the disk diffusion method. The isolates were also tested for their susceptibility to six biocides (glutaraldehyde, benzalkonium chloride, cetrimide, chlorhexidine gluconate, chlorocresol and gluconate, and phenyl mercuric nitrate) by agar dilution. The presence of integrons and resistance genes in MDR isolates were detected by polymerase chain reaction.

RESULTS

Thirty-six Pseudomonas isolates were MDR, and the majority of these isolates showed reduced susceptibility to biocides. In the MDR isolates, Class I integron was detected in 22 isolates (61.1%), while Class II and III integrons were identified in only four isolates (11.1%), In addition, aacA4 and qacE genes were detected in 22 (61.1%) and 11 (30.5%) isolates, respectively. Integron I-positive isolates showed reduced susceptibility to tested biocides.

CONCLUSIONS

The current study reveals the presence of different classes of integrons, with class I being predominant. Class I integron may be responsible for generating MDR P. aeruginosa isolates with reduced susceptibility to biocides. This linkage between integrons and biocide resistance in MDR-Pseudomonas isolates is notable and could be clinically important. Strict antibiotic prescription policies and the adequate use of biocides could help in controlling this problem.

Comparison of Topical Chlorhexidine and Mupirocin for the Prevention of Exit-Site Infection in Incident Peritoneal Dialysis Patients

♦ OBJECTIVE: Prevention of exit-site infection (ESI) is of paramount importance to peritoneal dialysis (PD) patients. The aim of this study was to evaluate the effectiveness of chlorhexidine in the prevention of ESI in incident PD patients compared with mupirocin. ♦ METHODS: This retrospective, pre-test/post-test observational study included all incident PD patients at Singapore General Hospital from 2012 to 2015. Patients received daily topical exit-site application of either mupirocin (2012 - 2013) or chlorhexidine (2014 - 2015) in addition to routine exit-site cleaning with 10% povidone-iodine. The primary outcome was ESI rate during the 2 time periods. Secondary outcomes were peritonitis rate, times to first ESI and peritonitis, hospitalization rate, and infection-related catheter removal. Event rates were analyzed using Poisson regression, and infection-free survival was estimated using Kaplan-Meier and Cox regression survival analyses. ♦ RESULTS: The study included 162 patients in the mupirocin period (follow-up 141.5 patient-years) and 175 patients in the chlorhexidine period (follow-up 136.9 patient-years). Compared with mupirocin-treated patients, chlorhexidine-treated patients experienced more frequent ESIs (0.22 vs 0.12 episodes/patient-year, p = 0.048), although this was no longer statistically significant following multivariable analysis (incidence rate ratio [IRR] 1.78, 95% confidence interval [CI] 0.98 - 3.26, p = 0.06). No significant differences were observed between the 2 groups with respect to time to first ESI (p = 0.10), peritonitis rate (p = 0.95), time to first peritonitis (p = 0.60), hospitalization rate (p = 0.21) or catheter removal rate (0.03 vs 0.04/patient-year, p = 0.56). ♦ CONCLUSIONS: Topical exit-site application of chlorhexidine cream was associated with a borderline significant, higher rate of ESI in incident PD patients compared with mupirocin cream.

Treatment of Periprosthetic Joint Infection Using Antimicrobials: Dilute Povidone-Iodine Lavage

Periprosthetic joint infections (PJI) remain a challenge for the orthopaedic surgeon to treat and remain a leading cause of failure of both primary and revision total joint arthroplasty. Once a PJI develops, surgical treatment is generally indicated and includes an aggressive irrigation and debridement. One component of the irrigation and debridement involves the use of an antiseptic irrigating solution. In primary and revision TJA, dilute povidone-iodine lavage can be performed prior to wound closure. Approximately 17.5mL of 10% povidone-iodine is diluted with 500-1000cc of normal saline. The wound is then irrigated with the dilute povidone-iodine for 3 minutes. The dilute povidone-iodine is then thoroughly irrigated and washed out of the wound with normal saline prior to wound closure. The use of dilute povidone-iodine lavage prior to wound closure has been shown to reduce the risk of deep surgical site infection in multiple surgical specialties. In primary TJA, it has been demonstrated to reduce the risk of infection, without any associated adverse effects. It is also included in multiple protocols for the surgical treatment of PJI. Dilute povidone-iodine lavage provides a safe and inexpensive method to reduce the rate of PJI in TJA.

Phytochemical profiling as a solution to palliate disinfectant limitations

The indiscriminate use of biocides for general disinfection has contributed to the increased incidence of antimicrobial tolerant microorganisms. This study aims to assess the potential of seven phytochemicals (tyrosol, caffeic acid, ferulic acid, cinnamaldehyde, coumaric acid, cinnamic acid and eugenol) in the control of planktonic and sessile cells of Staphylococcus aureus and Escherichia coli. Cinnamaldehyde and eugenol showed antimicrobial properties, minimum inhibitory concentrations of 3-5 and 5-12 mM and minimum bactericidal concentrations of 10-12 and 10-14 mM against S. aureus and E. coli, respectively. Cinnamic acid was able to completely control adhered bacteria with effects comparable to peracetic acid and sodium hypochlorite and it was more effective than hydrogen peroxide (all at 10 mM). This phytochemical caused significant changes in bacterial membrane hydrophilicity. The observed effectiveness of phytochemicals makes them interesting alternatives and/or complementary products to commonly used biocidal products. Cinnamic acid is of particular interest for the control of sessile cells.

Disinfectant and Antimicrobial Susceptibility Profiles of the Big Six Non-O157 Shiga Toxin-Producing Escherichia coli Strains from Food Animals and Humans

The disinfectant and antimicrobial susceptibility profiles of 138 non-O157 Shiga toxin-producing Escherichia coli strains (STECs) from food animals and humans were determined. Antimicrobial resistance (AMR) was moderate (39.1% of strains) in response to 15 antimicrobial agents. Animal strains had a lower AMR prevalence (35.6%) than did human strains (43.9%) but a higher prevalence of the resistance profile GEN-KAN-TET. A decreasing prevalence of AMR was found among animal strains from serogroups O45 > O145 > O121 > O111 > O26 > O103 and among human strains from serogroups O145 > O103 > O26 > O111 > O121 > O45. One animal strain from serogroups O121 and O145 and one human strain from serogroup O26 had extensive drug resistance. A high prevalence of AMR in animal O45 and O121 strains and no resistance or a low prevalence of resistance in human strains from these serogroups suggests a source other than food animals for human exposure to these strains. Among the 24 disinfectants evaluated, all strains were susceptible to triclosan. Animal strains had a higher prevalence of resistance to chlorhexidine than did human strains. Both animal and human strains had a similar low prevalence of low-level benzalkonium chloride resistance, and animal and human strains had similar susceptibility profiles for most other disinfectants. Benzyldimethylammonium chlorides and C10AC were the primary active components in disinfectants DC&R and P-128, respectively, against non-O157 STECs. A disinfectant FS512 MIC ≥ 8 μg/ml was more prevalent among animal O121 strains (61.5%) than among human O121 strains (25%), which may also suggest a source of human exposure to STEC O121 other than food animals. Bacterial inhibition was not dependent solely on pH but was correlated with the presence of dissociated organic acid species and some undissociated acids.

Quantitative evaluation of dermatological antiseptics

Topical antiseptics are frequently used in dermatological management, yet evidence for the efficacy of traditional generic formulations is often largely anecdotal. We tested the in vitro bactericidal activity of four commonly used topical antiseptics against Staphylococcus aureus, using a modified version of the European Standard EN 1276, a quantitative suspension test for evaluation of the bactericidal activity of chemical disinfectants and antiseptics. To meet the standard for antiseptic effectiveness of EN 1276, at least a 5 log10 reduction in bacterial count within 5 minutes of exposure is required. While 1% benzalkonium chloride and 6% hydrogen peroxide both achieved a 5 log10 reduction in S. aureus count, neither 2% aqueous eosin nor 1 : 10 000 potassium permanganate showed significant bactericidal activity compared with control at exposure periods of up to 1 h. Aqueous eosin and potassium permanganate may have desirable astringent properties, but these results suggest they lack effective antiseptic activity, at least against S. aureus.

Ecology and Evolution of the Human Microbiota: Fire, Farming and Antibiotics

Human activities significantly affect all ecosystems on the planet, including the assemblages that comprise our own microbiota. Over the last five million years, various evolutionary and ecological drivers have altered the composition of the human microbiota, including the use of fire, the invention of agriculture, and the increasing availability of processed foods after the Industrial Revolution. However, no factor has had a faster or more direct effect than antimicrobial agents. Biocides, disinfectants and antibiotics select for individual cells that carry resistance genes, immediately reducing both overall microbial diversity and within-species genetic diversity. Treated individuals may never recover their original diversity, and repeated treatments lead to a series of genetic bottlenecks. The sequential introduction of diverse antimicrobial agents has selected for increasingly complex DNA elements that carry multiple resistance genes, and has fostered their spread through the human microbiota. Practices that interfere with microbial colonization, such as sanitation, Caesarian births and bottle-feeding, exacerbate the effects of antimicrobials, generating species-poor and less resilient microbial assemblages in the developed world. More and more evidence is accumulating that these perturbations to our internal ecosystems lie at the heart of many diseases whose frequency has shown a dramatic increase over the last half century.

Conformational stability and thermal pathways of relaxation in triclosan (antibacterial/excipient/contaminant) in solid-state: combined spectroscopic ((1)H NMR) and computational (periodic DFT) study

The mechanism of molecular dynamics in the antibacterial/antifungal agent, triclosan (5-chloro-2-(2',4'-dichlorophenoxy)-phenol), in solid state was studied by (1)H NMR spectroscopy and periodic density functional theory (DFT) calculations. Temperature dependencies of the proton spin-lattice relaxation time (T1) in the ranges 86-293 and 90-250 K (at 15 and 24.667 MHz, respectively) and the second moment (M2) of the (1)H NMR resonant line in the range 103-300 K were measured. Two minima in the temperature dependence of T1 revealed a classical Arrhenius governed activation processes. The low temperature shallow minimum T1(T) of 71 s at 115 K, 15 MHz, which shifts with frequency, was assigned to classical hindered jumps of hydroxyl group around OC axis and with respect to a 5-chloro-2-phenol ring. The activation energy of this motion estimated on the basis of the fit of the theoretical model to the experimental points is 9.68 kJ/mol. The pointed high temperature minimum T1(T) of 59 s at 190 K, 15 MHz, which also shifts with frequency, was assigned to the small angle librations by Θlib= ± 9° between two positions of equilibrium differing in energy by 7.42 kJ/mol. The activation energy of this motion estimated on the basis of the fit of the theoretical model to the experimental points is 31.1 kJ/mol. Both motions result in a negligible reduction in the (1)H NMR line second moment, thus the second moment delivers an irrelevant description of the molecular motions in triclosan.

A novel method for comparison of biocidal properties of nanomaterials to bacteria, yeasts and algae

Toxicity testing of nanomaterials (NMs) is experimentally challenging because NMs may interfere with test environment and assay components. In this work we propose a simple and reliable method--a 'spot test' to compare biocidal potency of NMs to unicellular microorganisms such as bacteria, yeasts and algae. The assay is straightforward: cells are incubated in deionized water suspensions of NMs for up to 24h and then pipetted as a 'spot' on agarized medium. Altogether seven bacterial strains, yeast and a microalga were tested. CuO, TiO2 and two different Ag NPs, multi-wall C-nanotubes (MWCNTs), AgNO3, CuSO4, 3,5-dichlorophenol, triclosan and H2O2 were analyzed. The biocidal potency of tested substances ranged from 0.1mg/L to >1000 mg/L; whereas, the least potent NMs toward all test species were TiO2 NPs and MWCNTs and most potent Ag and CuO NPs. Based on the similar toxicity pattern of the tested chemicals on the nine unicellular organisms in deionized water we conclude that toxicity mechanism of biocidal chemicals seems to be similar, whatever the organism (bacteria, yeast, alga). Therefore, when the organisms are not 'protected' by their environment that usually includes various organic and inorganic supplements their tolerance to toxicants is chemical- rather than organism-dependent.

Integrons: past, present, and future

Integrons are versatile gene acquisition systems commonly found in bacterial genomes. They are ancient elements that are a hot spot for genomic complexity, generating phenotypic diversity and shaping adaptive responses. In recent times, they have had a major role in the acquisition, expression, and dissemination of antibiotic resistance genes. Assessing the ongoing threats posed by integrons requires an understanding of their origins and evolutionary history. This review examines the functions and activities of integrons before the antibiotic era. It shows how antibiotic use selected particular integrons from among the environmental pool of these elements, such that integrons carrying resistance genes are now present in the majority of Gram-negative pathogens. Finally, it examines the potential consequences of widespread pollution with the novel integrons that have been assembled via the agency of human antibiotic use and speculates on the potential uses of integrons as platforms for biotechnology.

Antimicrobial and biocide resistance of bacteria in a Lebanese tertiary care hospital

The environment in a Lebanese tertiary-level care hospital was examined for bacterial contamination. In total, 8 open-air and 62 surface samples were taken and CFU were enumerated. Morphologically different isolates (n=104) were obtained and tested for resistance to a wide range of antibiotics by the Kirby-Bauer disc diffusion method. Minimum bactericidal concentrations of isolates to seven different biocides used within this facility were also determined using both qualitative and quantitative methods. Gram-positive bacteria (82.7% of isolates) were encountered more often than Gram-negative bacteria (17.3%), and the genus Staphylococcus was most prevalent among isolates (59.6% of the isolates). Gram-positive isolates showed the highest resistance to penicillin (60.6%), clindamycin (54.5%) and ceftazidime (39.4%); the lowest frequencies of resistance were seen with vancomycin (0% of isolates), nitrofurantoin (3.5%), tetracycline (12.1%) and ciprofloxacin (12.1%). The prevalence of meticillin-resistant Staphylococcus aureus (MRSA) and meticillin-resistant coagulase negative staphylococci among all environmental samples was 3.8% and 11.5% of isolates, respectively. All Gram-negative isolates were multidrug-resistant (MDR). With respect to biocides, the highest frequency of resistance was to quaternary ammonium compounds (QACs) (13.5% of isolates) and the lowest frequency of resistance was to QAC/biguanide complex (<1% of isolates) and Anios DVA (3.8%). MDR bacteria can pose a serious threat in the hospital environment, showing the need for prudent use of antibiotics and correct infection control procedures.