Rapid and proven production of transplastomic tobacco plants by restoration of pigmentation and photosynthesis

Marker-Free Transplastomic Plants by Excision of Plastid Marker Genes Using Directly Repeated DNA Sequences

Excision of marker genes using DNA direct repeats makes use of the efficient native homologous recombination pathway present in the plastids of algae and plants. The method is simple, efficient, and widely applicable to plants and green algae. Marker excision frequency is dependent on the length and number of directly repeated sequences. When two repeats are used a repeat size of greater than 600 bp promotes efficient excision of the marker gene. A wide variety of sequences can be used to make the direct repeats. Only a single round of transformation is required and there is no requirement to introduce site-specific recombinases by retransformation or sexual crosses. Selection is used to maintain the marker and ensure homoplasmy of transgenic plastid genomes (plastomes). Release of selection allows the accumulation of marker-free plastomes generated by marker excision, which is a spontaneous and unidirectional process. Cytoplasmic sorting allows the segregation of cells with marker-free transgenic plastids. The marker-free shoots resulting from direct repeat mediated excision of marker genes have been isolated by vegetative propagation of shoots in the T₀ generation. Alternatively, accumulation of marker-free plastomes during growth, development and flowering of T₀ plants allows for the collection of seeds that give rise to a high proportion of marker-free T₁ seedlings. The procedure enables precise plastome engineering involving insertion of transgenes, point mutations and deletion of genes without the inclusion of any extraneous DNA. The simplicity and convenience of direct repeat excision facilitates its widespread use to isolate marker-free crops.

Rescue of Deletion Mutants to Isolate Plastid Transformants in Higher Plants

Plastid transformation is an attractive alternative to nuclear transformation enabling manipulation of native plastid genes and the insertion of foreign genes into plastids for applications in agriculture and industrial biotechnology. Transformation is achieved using dominant positive selection markers that confer resistance to antibiotics. The very high copy number of plastid DNA means that a prolonged selection step is required to obtain a uniform population of transgenic plastid genomes. Repair of mutant plastid genes with the corresponding functional allele allows selection based on restoration of the wild type phenotype. The use of deletion rather than point mutants avoids spontaneous reversion back to wild type. Combining antibiotic resistance markers with native plastid genes speeds up the attainment of homoplasmy and allows early transfer of transplastomic lines to soil where antibiotic selection is replaced by selection for photoautotrophic growth. Here we describe our method using the wild type rbcL gene as a plastid transformation marker to restore pigmentation and photosynthesis to a pale green heterotrophic rbcL mutant.

Excision of plastid marker genes using directly repeated DNA sequences

Excision of marker genes using DNA direct repeats makes use of the predominant homologous recombination pathways present in the plastids of algae and plants. The method is simple, efficient, and widely applicable to plants and microalgae. Marker excision frequency is dependent on the length and number of directly repeated sequences. When two repeats are used a repeat size of greater than 600 bp promotes efficient excision of the marker gene. A wide variety of sequences can be used to make the direct repeats. Only a single round of transformation is required, and there is no requirement to introduce site-specific recombinases by retransformation or sexual crosses. Selection is used to maintain the marker and ensure homoplasmy of transgenic plastid genomes. Release of selection allows the accumulation of marker-free plastid genomes generated by marker excision, which is spontaneous, random, and a unidirectional process. Positive selection is provided by linking marker excision to restoration of the coding region of an herbicide resistance gene from two overlapping but incomplete coding regions. Cytoplasmic sorting allows the segregation of cells with marker-free transgenic plastids. The marker-free shoots resulting from direct repeat-mediated excision of marker genes have been isolated by vegetative propagation of shoots in the T0 generation. Alternatively, accumulation of marker-free plastid genomes during growth, development and flowering of T0 plants allows the collection of seeds that give rise to a high proportion of marker-free T1 seedlings. The simplicity and convenience of direct repeat excision facilitates its widespread use to isolate marker-free crops.

Plastid marker gene excision in greenhouse-grown tobacco by agrobacterium-delivered Cre recombinase

Uniform transformation of the thousands of plastid genome (ptDNA) copies in a cell is driven by selection for plastid markers. When each of the plastid genome copies is uniformly altered, the marker gene is no longer needed. Plastid markers have been efficiently excised by site-specific recombinases expressed from nuclear genes either by transforming tissue culture cells or introducing the genes by pollination. Here we describe a protocol for the excision of plastid marker genes directly in tobacco (Nicotiana tabacum) plants by the Cre recombinase. Agrobacterium encoding the recombinase on its T-DNA is injected at an axillary bud site of a decapitated plant, forcing shoot regeneration at the injection site. The excised plastid marker, the bar (au) gene, confers a visual aurea leaf phenotype; thus marker excision via the flanking recombinase target sites is recognized by the restoration of normal green color of the leaves. The bar (au) marker-free plastids are transmitted through seed to the progeny. PCR and DNA gel blot (Southern) protocols to confirm transgene integration and plastid marker excision are also provided herein.

Plastid genetic engineering in Solanaceae

Plastid genetic engineering has come of age, becoming today an attractive alternative approach for the expression of foreign genes, as it offers several advantages over nuclear transformants. Significant progress has been made in plastid genetic engineering in tobacco and other Solanaceae plants, through the use of improved regeneration procedures and transformation vectors with efficient promoters and untranslated regions. Many genes encoding for industrially important proteins and vaccines, as well as genes conferring important agronomic traits, have been stably integrated and expressed in the plastid genome. Despite these advances, it remains a challenge to achieve marked levels of plastid transgene expression in non-green tissues. In this review, we summarize the basic requirements of plastid genetic engineering and discuss the current status, limitations, and the potential of plastid transformation for expanding future studies relating to Solanaceae plants.

Visual marker and Agrobacterium-delivered recombinase enable the manipulation of the plastid genome in greenhouse-grown tobacco plants

Successful manipulation of the plastid genome (ptDNA) has been carried out so far only in tissue-culture cells, a limitation that prevents plastid transformation being applied in major agronomic crops. Our objective is to develop a tissue-culture independent protocol that enables manipulation of plastid genomes directly in plants to yield genetically stable seed progeny. We report that in planta excision of a plastid aurea bar gene (bar(au) ) is detectable in greenhouse-grown plants by restoration of the green pigmentation in tobacco leaves. The P1 phage Cre or PhiC31 phage Int site-specific recombinase was delivered on the Agrobacterium T-DNA injected at the axillary bud site, resulting in the excision of the target-site flanked marker gene. Differentiation of new apical meristems was forced by decapitating the plants above the injection site. The new shoot apex that differentiated at the injection site contained bar(au)-free plastids in 30-40% of the injected plants, of which 7% transmitted the bar(au)-free plastids to the seed progeny. The success of obtaining seed with bar(au)-free plastids depended on repeatedly forcing shoot development from axillary buds, a process that was guided by the size and position of green sectors in the leaves. The success of in planta plastid marker excision proved that manipulation of the plastid genomes is feasible within an intact plant. Extension of the protocol to in planta plastid transformation depends on the development of new protocols for the delivery of transforming DNA encoding visual markers.

The chloroplast transformation toolbox: selectable markers and marker removal

Plastid transformation is widely used in basic research and for biotechnological applications. Initially developed in Chlamydomonas and tobacco, it is now feasible in a broad range of species. Selection of transgenic lines where all copies of the polyploid plastid genome are transformed requires efficient markers. A number of traits have been used for selection such as photoautotrophy, resistance to antibiotics and tolerance to herbicides or to other metabolic inhibitors. Restoration of photosynthesis is an effective primary selection method in Chlamydomonas but can only serve as a screening tool in flowering plants. The most successful and widely used markers are derived from bacterial genes that inactivate antibiotics, such as aadA that confers resistance to spectinomycin and streptomycin. For many applications, the presence of a selectable marker that confers antibiotic resistance is not desirable. Efficient marker removal methods are a major attraction of the plastid engineering tool kit. They exploit the homologous recombination and segregation pathways acting on chloroplast genomes and are based on direct repeats, transient co-integration or co-transformation and segregation of trait and marker genes. Foreign site-specific recombinases and their target sites provide an alternative and effective method for removing marker genes from plastids.

A 125 kDa RNase E/G-like protein is present in plastids and is essential for chloroplast development and autotrophic growth in Arabidopsis

Endoribonuclease E (RNase E) is a regulator of global gene expression in Escherichia coli and is the best studied member of the RNase E/G ribonuclease family. Homologues are present in other bacteria but the roles of plant RNase E/G-like proteins are not known. Arabidopsis thaliana contains a single nuclear gene (At2g04270) encoding a product with the conserved catalytic domain of RNase E/G-like proteins. At2g04270 and the adjacent At2g04280 gene form converging transcription units with a approximately 40 base overlap at their 3' ends. Several translation products were predicted from the analyses of At2g04270 cDNAs. An antibody raised against a recombinant A. thaliana RNase E/G-like protein recognized a 125 kDa protein band in purified chloroplast preparations fractionated by SDS-PAGE. The 125 kDa RNase E/G-like protein was detected in cotyledons, rosette and cauline leaves. T-DNA insertions in exon 6 or intron 11 of At2g04270 result in loss of the 125 kDa band or truncation to a 110 kDa band. Loss of At2g04270 function resulted in the arrest of chloroplast development, loss of autotrophic growth, and reduced plastid ribosomal, psbA and rbcL RNA levels. Homozygous mutant plants were pale-green, contained smaller plastids with fewer thylakoids and shorter granal stacks than wild-type chloroplasts, and required sucrose at all growth stages following germination right up to flowering and setting seeds. Recombinant A. thaliana RNase E/G-like proteins rescued an E. coli RNase E mutant and cleaved an rbcL RNA substrate. Expression of At2g04270 was highly correlated with genes encoding plastid polyribonucleotide phosphorylase, S1 RNA-binding, and CRS1/YhbY domain proteins.

A guide to choosing vectors for transformation of the plastid genome of higher plants

Plastid transformation, originally developed in tobacco (Nicotiana tabacum), has recently been extended to a number of crop species enabling in vivo probing of plastid function and biotechnological applications. In this article we report new plastid vectors that enable insertion of transgenes in the inverted repeat region of the plastome between the trnV and 3'rps12 or trnI and trnA genes. Efficient recovery of transplastomic clones is ensured by selection for spectinomycin (aadA) or kanamycin (neo) resistance genes. Expression of marker genes can be verified using commercial antibodies that detect the accumulation of neomycin phosphotranseferase II, the neo gene product, or the C-terminal c-myc tag of aminoglycoside-3''-adenylytransferase, encoded by the aadA gene. Aminoglycoside-3''-adenylytransferase, the spectinomycin inactivating enzyme, is translationally fused with green fluorescent protein in two vectors so that transplastomic clones can be selected by spectinomycin resistance and visually identified by fluorescence in ultraviolet light. The marker genes in the new vectors are flanked by target sites for Cre or Int, the P1 and phiC31 phage site-specific recombinases. When uniform transformation of all plastid genomes is obtained, the marker genes can be excised by Cre or Int expressed from a nuclear gene. Choice of expression signals for the gene of interest, complications caused by the presence of plastid DNA sequences recognized by Cre, and loss of transgenes by homologous recombination via duplicated sequences are also discussed to facilitate a rational choice from among the existing vectors and to aid with new target-specific vector designs.

The genetic transformation of plastids

Biolistic delivery of DNA initiated plastid transformation research and still is the most widelyused approach to generate transplastomic lines in both algae and higher plants. The principal designof transformation vectors is similar in both phylogenetic groups. Although important additions tothe list of species transformed in their plastomes have been made in algae and in higher plants, thekey organisms in the area are still the two species, in which stable plastid transformation was initiallysuccessful, i.e., Chlamydomonas reinhardtii and tobacco. Basicresearch into organelle biology has substantially benefited from the homologous recombination-basedcapability to precisely insert at predetermined loci, delete, disrupt, or exchange plastid genomesequences. Successful expression of recombinant proteins, including pharmaceutical proteins, hasbeen demonstrated in Chlamydomonas as well as in higher plants,where some interesting agronomic traits were also engineered through plastid transformation.

Construction of marker-free transplastomic plants

Because of its prokaryotic-type gene expression machinery, maternal inheritance and the opportunity to express proteins at a high level, the plastid genome (plastome or ptDNA) is an increasingly popular target for engineering. The ptDNA is present as up to 10,000 copies per cell, making selection for marker genes essential to obtain plants with uniformly transformed ptDNA. However, the marker gene is no longer desirable when homoplastomic plants are obtained. Marker-free transplastomic plants can now be obtained with four recently developed protocols: homology-based excision via directly repeated sequences, excision by phage site-specific recombinanses, transient cointegration of the marker gene, and the cotransformation-segregation approach. Marker excision technology will benefit applications in agriculture and in molecular farming.

Isolation of precise plastid deletion mutants by homology-based excision: a resource for site-directed mutagenesis, multi-gene changes and high-throughput plastid transformation

We describe a simple and efficient homology-based excision method to delete plastid genes. The procedure allows one or more adjacent plastid genes to be deleted without the retention of a marker gene. We used aadA-based transformation to duplicate a 649 bp region of plastid DNA corresponding to the atpB promoter region. Efficient recombination between atpB repeats deletes the intervening foreign genes and 1,984 bp of plastid DNA (co-ordinates 57,424-59,317) containing the rbcL gene. Only five foreign bases are present in DeltarbcL plants illustrating the precision of homology-based excision. Sequence analysis of non-functional rbcL-related sequences in DeltarbcL plants indicated an extra-plastidic origin. Mutant DeltarbcL plants were heterotrophic, pale-green and contained round plastids with reduced amounts of thylakoids. Restoration of autotrophy and leaf pigmentation following aadA-based transformation with the wild-type rbcL gene ruled out mutations in other genes. Excision and re-use of aadA shows that, despite the multiplicity of plastid genomes, homology-based excision ensures complete removal of functional aadA genes. Rescue of the DeltarbcL mutation and autotrophic growth stabilizes transgenic plastids in heteroplasmic transformants following antibiotic withdrawal, enhancing the overall efficiency of plastid transformation. Unlike the available set of homoplasmic knockout mutants in 25 plastid genes, the rbcL deletion mutant isolated here is readily transformed with the efficient aadA marker gene. This improvement in deletion design facilitates advanced studies that require the isolation of double mutants in distant plastid genes and the replacement of the deleted locus with site-directed mutant alleles and is not easily achieved using other methods.

The tobacco plastid accD gene is essential and is required for leaf development

Angiosperm plastid genomes typically encode approximately 80 polypeptides, mainly specifying plastid-localized functions such as photosynthesis and gene expression. Plastid protein synthesis and expression of the plastid clpP1 gene are essential for development in tobacco, indicating the presence of one or more plastid genes whose influence extends beyond the plastid compartment. The plastid accD gene encodes the beta-carboxyl transferase subunit of acetyl-CoA carboxylase and is present in the plastids of most flowering plants, including non-photosynthetic parasitic plants. We replaced the wild-type accD gene with an aadA-disrupted mutant allele using homologous recombination. Persistent heteroplasmy in the presence of antibiotics indicated that the wild-type accD allele was essential. The phenotype of the accD knockout was revealed in plastid transformants grown in the absence of antibiotics. Leaves contained pale green sectors and lacked part or all of the leaf lamina due to arrested division or loss of cells. Abnormal structures were present in plastids found in mutant plants, indicating that accD might be required to maintain the plastid compartment. Loss of the plastid compartment would be expected to be lethal. These results provide genetic evidence showing the essential role of plastid ACCase in the pathway leading to the synthesis of products required for the extra-plastidic processes needed for leaf development.

New vectors and marker excision systems mark progress in engineering the plastid genome of higher plants

The transformation of the plastid genome, until recently restricted to tobacco, is now being extended to a rapidly growing list of crops. This perspective provides an overview of emerging trends of technology development in the field with a focus on vector design and marker excision systems. The new tools will facilitate engineering of the photosynthetic machinery and enable novel agricultural and industrial applications.

Plant protoplasts: status and biotechnological perspectives

Plant protoplasts ("naked" cells) provide a unique single cell system to underpin several aspects of modern biotechnology. Major advances in genomics, proteomics, and metabolomics have stimulated renewed interest in these osmotically fragile wall-less cells. Reliable procedures are available to isolate and culture protoplasts from a range of plants, including both monocotyledonous and dicotyledonous crops. Several parameters, particularly the source tissue, culture medium, and environmental factors, influence the ability of protoplasts and protoplast-derived cells to express their totipotency and to develop into fertile plants. Importantly, novel approaches to maximise the efficiency of protoplast-to-plant systems include techniques already well established for animal and microbial cells, such as electrostimulation and exposure of protoplasts to surfactants and respiratory gas carriers, especially perfluorochemicals and hemoglobin. However, despite at least four decades of concerted effort and technology transfer between laboratories worldwide, many species still remain recalcitrant in culture. Nevertheless, isolated protoplasts are unique to a range of experimental procedures. In the context of plant genetic manipulation, somatic hybridisation by protoplast fusion enables nuclear and cytoplasmic genomes to be combined, fully or partially, at the interspecific and intergeneric levels to circumvent naturally occurring sexual incompatibility barriers. Uptake of isolated DNA into protoplasts provides the basis for transient and stable nuclear transformation, and also organelle transformation to generate transplastomic plants. Isolated protoplasts are also exploited in numerous miscellaneous studies involving membrane function, cell structure, synthesis of pharmaceutical products, and toxicological assessments. This review focuses upon the most recent developments in protoplast-based technologies.

Generation of marker-free plastid transformants using a transiently cointegrated selection gene

Genetic engineering of higher plant plastids typically involves stable introduction of antibiotic resistance genes as selection markers. Even though chloroplast genes are maternally inherited in most crops, the possibility of marker transfer to wild relatives or microorganisms cannot be completely excluded. Furthermore, marker expression can be a substantial metabolic drain. Therefore, efficient methods for complete marker removal from plastid transformants are necessary. One method to remove the selection gene from higher plant plastids is based on loop-out recombination, a process difficult to control because selection of homoplastomic transformants is unpredictable. Another method uses the CRE/lox system, but requires additional retransformation and sexual crossing for introduction and subsequent removal of the CRE recombinase. Here we describe the generation of marker-free chloroplast transformants in tobacco using the reconstitution of wild-type pigmentation in combination with plastid transformation vectors, which prevent stable integration of the kanamycin selection marker. One benefit of a procedure using mutants is that marker-free plastid transformants can be produced directly in the first generation (T0) without retransformation or crossing.

Plastid transformation in higher plants

Plastids of higher plants are semi-autonomous organelles with a small, highly polyploid genome and their own transcription-translation machinery. This review provides an overview of the technology for the genetic modification of the plastid genome including: vectors, marker genes and gene design, the use of gene knockouts and over-expression to probe plastid function and the application of site-specific recombinases for excision of target DNA. Examples for applications in basic science include the study of plastid gene transcription, mRNA editing, photosynthesis and evolution. Examples for biotechnological applications are incorporation of transgenes in the plastid genome for containment and high-level expression of recombinant proteins for pharmaceutical and industrial applications. Plastid transformation is routine only in tobacco. Progress in implementing the technology in other crops is discussed.