Evaluation of antifungal effect of iron‐oxide nanoparticles against different Candida species

Advancements in nanoparticle-based therapies for multidrug-resistant candidiasis infections: a comprehensive review

Candida auris, a rapidly emerging multidrug-resistant fungal pathogen, poses a global health threat, with cases reported in over 47 countries. Conventional detection methods struggle, and the increasing resistance ofC. auristo antifungal agents has limited treatment options. Nanoparticle-based therapies, utilizing materials like silver, carbon, zinc oxide, titanium dioxide, polymer, and gold, show promise in effectively treating cutaneous candidiasis. This review explores recent advancements in nanoparticle-based therapies, emphasizing their potential to revolutionize antifungal therapy, particularly in combatingC. aurisinfections. The discussion delves into mechanisms of action, combinations of nanomaterials, and their application against multidrug-resistant fungal pathogens, offering exciting prospects for improved clinical outcomes and reduced mortality rates. The aim is to inspire further research, ushering in a new era in the fight against multidrug-resistant fungal infections, paving the way for more effective and targeted therapeutic interventions.

Microbial Biofilm Inhibition Using Magnetic Cross-Linked Polyphenol Oxidase Aggregates

Microbial biofilm accumulation poses a serious threat to the environment, presents significant challenges to different industries, and exhibits a large impact on public health. Since there has not been a conclusive answer found despite various efforts, the potential green and economical methods are being focused on, particularly the innovative approaches that employ biochemical agents. In the present study, we propose a bio-nanotechnological method using magnetic cross-linked polyphenol oxidase aggregates (PPO m-CLEA) for inhibition of microbial biofilm including multidrug resistant bacteria. Free PPO solution showed only 55-60% biofilm inhibition, whereas m-CLEA showed 70-75% inhibition, as confirmed through microscopic techniques. The carbohydrate and protein contents in biofilm extracellular polymeric substances (EPSs) were reduced significantly. The m-CLEA demonstrated reusability up to 5 cycles with consistent efficiency in biofilm inhibition. Computational work was also done where molecular docking of PPO with microbial proteins associated with biofilm formation was conducted, resulting in favorable binding scores and inter-residual interactions. Overall, both in vitro and in silico results suggest that PPO interferes with microbial cell attachment and EPS formation, thereby preventing biofilm colonization.

Advances in the Optimization of Fe Nanoparticles: Unlocking Antifungal Properties for Biomedical Applications

In recent years, nanotechnology has achieved a remarkable status in shaping the future of biological applications, especially in combating fungal diseases. Owing to excellence in nanotechnology, iron nanoparticles (Fe NPs) have gained enormous attention in recent years. In this review, we have provided a comprehensive overview of Fe NPs covering key synthesis approaches and underlying working principles, the factors that influence their properties, essential characterization techniques, and the optimization of their antifungal potential. In addition, the diverse kinds of Fe NP delivery platforms that command highly effective release, with fewer toxic effects on patients, are of great significance in the medical field. The issues of biocompatibility, toxicity profiles, and applications of optimized Fe NPs in the field of biomedicine have also been described because these are the most significant factors determining their inclusion in clinical use. Besides this, the difficulties and regulations that exist in the transition from laboratory to experimental clinical studies (toxicity, specific standards, and safety concerns) of Fe NPs-based antifungal agents have been also summarized.

Synergistic Inhibition of Synbiotic Cultures among Lactobacilli and Plant Extracts against Vaginal Discharge Causing Candida albicans

Vulvovaginal candidiasis (VVC) is the most common cause of vaginal discharge among women. The present study aimed to investigate the synergistic anticandidal effect of lactobacillus cultures supplemented with plant extracts. Among 600 isolates of lactic acid bacteria, 41 isolates exhibited inhibitory activity against Candida albicans ATCC10231. Six out of 41 cell-free supernatants demonstrated the most potent antibacterial and anticandidal activities. They also inhibited the clinical isolates of C. albicans, causing VVC and non-C. albicans. The synergistic effect between Lactobacillus crispatus 84/7 and Limosilactobacillus reuteri 89/4 was demonstrated by the lowest fractional inhibitory concentration index (FICI = 0.5). The synbiotic culture of bacterial combination, cultured with Jerusalem artichoke (H. tuberosus) extract, also exhibited the strongest inhibition against the tested C. albicans. Biofilm formation decreased after 12 h of incubation in the selected cell-free supernatants of this synbiotic culture. The anticandidal activity of crude extracts was lost after treatment with proteinase K and trypsin but not with heating conditions, suggesting that it may be a heat-stable substance. In conclusion, the combination of L. crispatus 84/7 and L. reuteri 89/4 with H. tuberosus may be a promising candidate for inhibiting Candida infection and biofilm formation, with the potential use as ingredients in vaginal biotherapeutic products.

Green synthesis of iron nanoparticles: Sources and multifarious biotechnological applications

Green synthesis of iron nanoparticles is a highly fascinating research area and has gained importance due to reliable, sustainable and ecofriendly protocol for synthesizing nanoparticles, along with the easy availability of plant materials and their pharmacological significance. As an alternate to physical and chemical synthesis, the biological materials, like microorganisms and plants are considered to be less costly and environment-friendly. Iron nanoparticles with diverse morphology and size have been synthesized using biological extracts. Microbial (bacteria, fungi, algae etc.) and plant extracts have been employed in green synthesis of iron nanoparticles due to the presence of various metabolites and biomolecules. Physical and biochemical properties of biologically synthesized iron nanoparticles are superior to that are synthesized using physical and chemical agents. Iron nanoparticles have magnetic property with thermal and electrical conductivity. Iron nanoparticles below a certain size (generally 10-20 nm), can exhibit a unique form of magnetism called superparamagnetism. They are non-toxic and highly dispersible with targeted delivery, which are suitable for efficient drug delivery to the target. Green synthesized iron nanoparticles have been explored for multifarious biotechnological applications. These iron nanoparticles exhibited antimicrobial and anticancerous properties. Iron nanoparticles adversely affect the cell viability, division and metabolic activity. Iron nanoparticles have been used in the purification and immobilization of various enzymes/proteins. Iron nanoparticles have shown potential in bioremediation of various organic and inorganic pollutants. This review describes various biological sources used in the green synthesis of iron nanoparticles and their potential applications in biotechnology, diagnostics and mitigation of environmental pollutants.

Hyphae-specific genes: Possible molecular targets for magnetic iron oxide nanoparticles alone and combined with visible light in Candida albicans

Candida albicans readily develops resistance to fluconazole. Magnetic iron oxide nanoparticles (denoted as MION) and antimicrobial photodynamic therapy are attracting attention as therapeutic agents. This study aims to investigate the inhibitory efficacy of MION alone and combined with visible light against C. albicans and expression analysis of hyphal wall protein 1 (HWP1) and agglutinin-like sequence 1 (ALS1) genes in C. albicans. Antifungal susceptibility testing, photodynamic activity assay, reactive oxygen species (ROS) production assay and gene expression analysis were determined in C. albicans treated with MION alone and combined with visible light. MION at 1 × minimum inhibitory concentration (MIC) level (500 μg/mL) exhibited antifungal activity against C. albicans isolates. Further, 1 × MIC levels of MION alone and combined with visible light displayed remarkable fungicidal effects at 24 and 48 h after treatment. The MION combined with visible light caused the highest levels of ROS production by all C. albicans isolates. The relative RT-PCR data showed significant downregulation of HWP1 and ALS1 genes which are the key virulence genes in C. albicans. Differences in gene expression of  HWP1 and ALS1 were more significant in MION combined with visible light treatments than MION alone. Our study sheds a novel light on facile development of effective treatment of C. albicans especially fluconazole-resistant C. albicans infections. The hyphae-specific genes HWP1 and ALS1 could be probable molecular targets for MION alone and combined with visible light in C. albicans.

A comprehensive review on potential applications of metallic nanoparticles as antifungal therapies to combat human fungal diseases

Human pathogenic fungi are responsible for causing a range of infection types including mucosal, skin, and invasive infections. Life-threatening and invasive fungal infections (FIs) are responsible for mortality and morbidity, especially for individuals with compromised immune function. The number of currently available therapeutic agents against invasive FIs is limited compared to that against bacterial infections. In addition, the increased mortality and morbidity caused by FIs are linked to the limited number of available antifungal agents, antifungal resistance, and the increased toxicity of these agents. Currently available antifungal agents have several drawbacks in efficiency, efficacy, toxicity, activity spectrum, and selectivity. It has already been demonstrated with numerous metallic nanoparticles (MNPs) that these nanoparticles can serve as an effective and alternative solution as fungicidal agents. MNPs have great potential owing to their intrinsic antifungal properties and potential to deliver antifungal drugs. For instance, gold nanoparticles (AuNPs) have the capacity to disturb mitochondrial calcium homeostasis induced AuNP-mediated cell death in Candida albicans. In addition, both copper nanoparticles and copper oxide nanoparticles exerted significant suppressive properties against pathogenic fungi. Silver nanoparticles showed strong antifungal properties against numerous pathogenic fungi, such as Stachybotrys chartarum, Mortierella alpina, Chaetomium globosum, A. fumigatus, Cladosporium cladosporioides, Penicillium brevicompactum, Trichophyton rubrum, C. tropicalis, and C. albicans. Iron oxide nanoparticles showed potent antifungal activities against A. niger and P. chrysogenum. It has also been reported that zinc oxide nanoparticles can significantly inhibit fungal growth. These NPs have already exerted potent antifungal properties against a number of pathogenic fungal species including Candida, Aspergillus, Fusarium, and many others. Several strategies are currently used for the research and development of antifungal NPs including chemical modification of NPs and combination with the available drugs. This review has comprehensively presented the current and innovative antifungal approach using MNPs. Moreover, different types of MNPs, their physicochemical characteristics, and production techniques have been summarized in this review.

Biofabrication of Fe3O4 Nanoparticles from Spirogyra hyalina and Ajuga bracteosa and Their Antibacterial Applications

Iron oxide nanoparticles (NPs) have attracted substantial interest due to their superparamagnetic features, biocompatibility, and nontoxicity. The latest progress in the biological production of Fe₃O₄ NPs by green methods has improved their quality and biological applications significantly. In this study, the fabrication of iron oxide NPs from Spirogyra hyalina and Ajuga bracteosa was conducted via an easy, environmentally friendly, and cost-effective process. The fabricated Fe₃O₄ NPs were characterized using various analytical methods to study their unique properties. UV-Vis absorption peaks were observed in algal and plant-based Fe₃O₄ NPs at 289 nm and 306 nm, respectively. Fourier transform infrared (FTIR) spectroscopy analyzed diverse bioactive phytochemicals present in algal and plant extracts that functioned as stabilizing and capping agents in the fabrication of algal and plant-based Fe₃O₄ NPs. X-ray diffraction of NPs revealed the crystalline nature of both biofabricated Fe₃O₄ NPs and their small size. Scanning electron microscopy (SEM) revealed that algae and plant-based Fe₃O₄ NPs are spherical and rod-shaped, averaging 52 nm and 75 nm in size. Energy dispersive X-ray spectroscopy showed that the green-synthesized Fe₃O₄ NPs require a high mass percentage of iron and oxygen to ensure their synthesis. The fabricated plant-based Fe₃O₄ NPs exhibited stronger antioxidant properties than algal-based Fe₃O₄ NPs. The algal-based NPs showed efficient antibacterial potential against E. coli, while the plant-based Fe₃O₄ NPs displayed a higher zone of inhibition against S. aureus. Moreover, plant-based Fe₃O₄ NPs exhibited superior scavenging and antibacterial potential compared to the algal-based Fe₃O₄ NPs. This might be due to the greater number of phytochemicals in plants that surround the NPs during their green fabrication. Hence, the capping of bioactive agents over iron oxide NPs improves antibacterial applications.

Biofilm-associated genes as potential molecular targets of nano-Fe3O4 in Candida albicans

BACKGROUND

There are few effective treatments for Candida biofilm-associated infections. The present study demonstrated changes in the expression of biofilm-associated genes in Candida albicans treated with magnetic iron oxide nanoparticles (denoted as nano-Fe₃O₄).

METHODS

Nano-Fe₃O₄ was biologically synthesized using Bacillus licheniformis, Bacillus cereus, and Fusarium oxysporum. Additionally, the biologically synthesized nano-Fe₃O₄ was characterized by visual observation; ultraviolet-visible spectroscopy, scanning electron microscopy, X-ray diffraction spectroscopy, and Fourier transform infrared spectroscopy. The biologically synthesized nano-Fe₃O₄ was tested for growth and biofilm formation in C. albicans. Furthermore, quantitative real-time reverse transcriptase-polymerase chain reaction (RT-PCR) was used to study the inhibition of biofilm-associated genes in C. albicans treated with nano-Fe₃O₄.

RESULTS

The production of biologically synthesized nano-Fe₃O₄ was confirmed using extensive characterization methods. The nano-Fe₃O₄ inhibited growth and biofilm formation. Nano-Fe₃O₄ exhibited growth inhibition with minimum inhibition concentrations (MICs) of 50 to 200 μg mL^-1. The anti-biofilm effects of nano-Fe₃O₄ were shown by 2,3-bis (2-methoxy-4-nitro-5 sulfophenyl)-5-[(phenylamino) carbonyl]-2H-tetrazolium hydroxide (XTT) reduction assay, crystal violet staining, and light field microscopy. The gene expression results showed that the downregulation of BCR1, ALS1, ALS3, HWP1, and ECE1 genes inhibited the biofilm formation in C. albicans. ALS1 reduction was greater than others, with downregulation of 1375.83-, 1178.71-, and 768.47-fold at 2 × MIC, 1 × MIC, and ½ × MIC of nano-Fe₃O₄, respectively.

CONCLUSION

Biofilm-associated genes as potential molecular targets of nano-Fe₃O₄ in C. albicans may be an effective novel treatment strategy for biofilm-associated infections.

Using inorganic nanoparticles to fight fungal infections in the antimicrobial resistant era

Fungal infections pose a serious threat to human health and livelihoods. The number and variety of clinically approved antifungal drugs is very limited, and the emergence and rapid spread of resistance to these drugs means the impact of fungal infections will increase in the future unless alternatives are found. Despite the significance and major challenges associated with fungal infections, this topic receives significantly less attention than bacterial infections. A major challenge in the development of fungi-specific drugs is that both fungi and mammalian cells are eukaryotic and have significant overlap in their cellular machinery. This lack of fungi-specific drug targets makes human cells vulnerable to toxic side effects from many antifungal agents. Furthermore, antifungal drug resistance necessitates higher doses of the drugs, leading to significant human toxicity. There is an urgent need for new antifungal agents, specifically those that can limit the emergence of new resistant species. Non-drug nanomaterials have primarily been explored as antibacterial agents in recent years; however, they are also a promising source of new antifungal candidates. Thus, this article reviews current research on the use of inorganic nanoparticles as antifungal agents. We also highlight challenges facing antifungal nanoparticles and discuss possible future research opportunities in this field. STATEMENT OF SIGNIFICANCE: Fungal infections pose a growing threat to human health and livelihood. The rapid spread of resistance to current antifungal drugs has led to an urgent need to develop alternative antifungals. Nanoparticles have many properties that could make them useful antimycotic agents. To the authors' knowledge, there is no published review so far that has comprehensively summarized the current development status of antifungal inorganic nanomaterials, so we decided to fill this gap. In this review, we discussed the state-of-the-art research on antifungal inorganic nanoparticles including metal, metal oxide, transition-metal dichalcogenides, and inorganic non-metallic particle systems. Future directions for the design of inorganic nanoparticles with higher antifungal efficacy and lower toxicity are described as a guide for further development in this important area.

Metal Nanoparticles to Combat Candida albicans Infections: An Update

Candidiasis is an opportunistic mycosis with high annual incidence worldwide. In these infections, Candida albicans is the chief pathogen owing to its multiple virulence factors. C. albicans infections are usually treated with azoles, polyenes and echinocandins. However, these antifungals may have limitations regarding toxicity, relapse of infections, high cost, and emergence of antifungal resistance. Thus, the development of nanocarrier systems, such as metal nanoparticles, has been widely investigated. Metal nanoparticles are particulate dispersions or solid particles 10-100 nm in size, with unique physical and chemical properties that make them useful in biomedical applications. In this review, we focus on the activity of silver, gold, and iron nanoparticles against C. albicans. We discuss the use of metal nanoparticles as delivery vehicles for antifungal drugs or natural compounds to increase their biocompatibility and effectiveness. Promisingly, most of these nanoparticles exhibit potential antifungal activity through multi-target mechanisms in C. albicans cells and biofilms, which can minimize the emergence of antifungal resistance. The cytotoxicity of metal nanoparticles is a concern, and adjustments in synthesis approaches or coating techniques have been addressed to overcome these limitations, with great emphasis on green synthesis.

Antifungal Effect of Nanoparticles against COVID-19 Linked Black Fungus: A Perspective on Biomedical Applications

Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) is a highly transmissible and pathogenic coronavirus that has caused a 'coronavirus disease 2019' (COVID-19) pandemic in multiple waves, which threatens human health and public safety. During this pandemic, some patients with COVID-19 acquired secondary infections, such as mucormycosis, also known as black fungus disease. Mucormycosis is a serious, acute, and deadly fungal infection caused by Mucorales-related fungal species, and it spreads rapidly. Hence, prompt diagnosis and treatment are necessary to avoid high mortality and morbidity rates. Major risk factors for this disease include uncontrolled diabetes mellitus and immunosuppression that can also facilitate increases in mucormycosis infections. The extensive use of steroids to prevent the worsening of COVID-19 can lead to black fungus infection. Generally, antifungal agents dedicated to medical applications must be biocompatible, non-toxic, easily soluble, efficient, and hypoallergenic. They should also provide long-term protection against fungal growth. COVID-19-related black fungus infection causes a severe increase in fatalities. Therefore, there is a strong need for the development of novel and efficient antimicrobial agents. Recently, nanoparticle-containing products available in the market have been used as antimicrobial agents to prevent bacterial growth, but little is known about their efficacy with respect to preventing fungal growth, especially black fungus. The present review focuses on the effect of various types of metal nanoparticles, specifically those containing silver, zinc oxide, gold, copper, titanium, magnetic, iron, and carbon, on the growth of various types of fungi. We particularly focused on how these nanoparticles can impact the growth of black fungus. We also discussed black fungus co-infection in the context of the global COVID-19 outbreak, and management and guidelines to help control COVID-19-associated black fungus infection. Finally, this review aimed to elucidate the relationship between COVID-19 and mucormycosis.

Biosynthesis and characterization of iron oxide nanoparticles from Mentha spicata and screening its combating potential against Phytophthora infestans

Plant pathogens cause serious diseases to agricultural crops which lead to food insecurity in the world. To combat plant pathogens, various strategies have been developed including the use of agrochemicals. The overuse of these chemicals is now leading to the pesticide-resistant capability of pathogens. To overcome this problem, modern nanobiotechnology offers the production of alternative nano drugs. In this study, we used Mentha spicata for the synthesis of iron oxide nanoparticles using the green synthesis method. The synthesis of Fe2O3 NPs was confirmed through various characterizations. UV-Vis analysis detected a characteristic absorbance at the spectral range of 272 nm. The SEM micrographic analysis at various magnifications displayed circular or rod-shaped nanoparticles with a size ranging from 21 to 82 nm. The elemental EDX characterization showed intense peaks with a weight percent of 57, 34.93, and 8.07 for Fe, O, and, Cl respectively. TGA analysis showed that weight loss at 44-182, 500, and 660°C with no further modification indicates the thermal stability of iron oxide nanoparticles. FTIR spectrum of uncalined detects various bands at 3331, 1625, and 1,437 cm-1 for the hydroxyl group. After calcination two bands at 527 and 434 cm-1 were observed for Fe-O. The antimicrobial in vitro study showed maximum growth inhibition of Phytophthora infestans by the concentration of 100 μg ml-1 of Fe2O3-PE and Fe2O3 NPs. Therefore, this study resulted that bio-stable iron oxide nanoparticles can be used as alternative antimicrobial agents.

Analysis of Electromagnetic Shielding Properties of a Material Developed Based on Silver-Coated Copper Core-Shell Spraying

This study proposes an electromagnetic shielding material sprayed with silver-coated copper powder (core-shell powder). The shielding properties of the material are analyzed in details section. Cross-sectional observation and sheet resistance measurement were used to determine the thickness and electrical conductivity of the electromagnetic shielding layer, which was generated by spray-coating; this aided in confirming the uniformity of the coating film. The results indicate that the electromagnetic interference shielding effectiveness increases when the silver-coated copper paste (core-shell paste) is used as the coating material rather than the conventional aluminum base. The proposed material can be used in various frequency ranges owing to the excellent shielding effectiveness of the core-shell paste used in this study. Further investigations on the optimized spray-coating type of electromagnetic shielding material are required based on the composition of the core-shell paste and the thickness of the coating film.

Biomaterials for the Prevention of Oral Candidiasis Development

Thousands of microorganisms coexist within the human microbiota. However, certain conditions can predispose the organism to the overgrowth of specific pathogens that further lead to opportunistic infections. One of the most common such imbalances in the normal oral flora is the excessive growth of Candida spp., which produces oral candidiasis. In immunocompromised individuals, this fungal infection can reach the systemic level and become life-threatening. Hence, prompt and efficient treatment must be administered. Traditional antifungal agents, such as polyenes, azoles, and echinocandins, may often result in severe adverse effects, regardless of the administration form. Therefore, novel treatments have to be developed and implemented in clinical practice. In this regard, the present paper focuses on the newest therapeutic options against oral Candida infections, reviewing compounds and biomaterials with inherent antifungal properties, improved materials for dental prostheses and denture adhesives, drug delivery systems, and combined approaches towards developing the optimum treatment.

Nanotechnology in Bladder Cancer: Diagnosis and Treatment

Bladder cancer (BC) is the second most common cancer of the urinary tract in men and the fourth most common cancer in women, and its incidence rises with age. There are many conventional methods for diagnosis and treatment of BC. There are some current biomarkers and clinical tests for the diagnosis and treatment of BC. For example, radiotherapy combined with chemotherapy and surgical, but residual tumor cells mostly cause tumor recurrence. In addition, chemotherapy after transurethral resection causes high side effects, and lack of selectivity, and low sensitivity in sensing. Therefore, it is essential to improve new procedures for the diagnosis and treatment of BC. Nanotechnology has recently sparked an interest in a variety of areas, including medicine, chemistry, physics, and biology. Nanoparticles (NP) have been used in tumor therapies as appropriate tools for enhancing drug delivery efficacy and enabling therapeutic performance. It is noteworthy, nanomaterial could be reduced the limitation of conventional cancer diagnosis and treatments. Since, the major disadvantages of therapeutic drugs are their insolubility in an aqueous solvent, for instance, paclitaxel (PTX) is one of the important therapeutic agents utilized to treating BC, due to its ability to prevent cancer cell growth. However, its major problem is the poor solubility, which has confirmed to be a challenge when improving stable formulations for BC treatment. In order to reduce this challenge, anti-cancer drugs can be loaded into NPs that can improve water solubility. In our review, we state several nanosystem, which can effective and useful for the diagnosis, treatment of BC. We investigate the function of metal NPs, polymeric NPs, liposomes, and exosomes accompanied therapeutic agents for BC Therapy, and then focused on the potential of nanotechnology to improve conventional approaches in sensing.

Mechanistic Understanding of Candida albicans Biofilm Formation and Approaches for Its Inhibition

In recent years, the demand for novel antifungal therapies has increased several- folds due to its potential to treat severe biofilm-associated infections. Biofilms are made by the sessile microorganisms attached to the abiotic or biotic surfaces, enclosed in a matrix of exopolymeric substances. This results in new phenotypic characteristics and intrinsic resistance from both host immune response and antimicrobial drugs. Candida albicans biofilm is a complex association of hyphal cells that are associated with both abiotic and animal tissues. It is an invasive fungal infection and acts as an important virulent factor. The challenges linked with biofilm-associated diseases have urged scientists to uncover the factors responsible for the formation and maturation of biofilm. Several strategies have been developed that could be adopted to eradicate biofilm-associated infections. This article presents an overview of the role of C. albicans biofilm in its pathogenicity, challenges it poses and threats associated with its formation. Further, it discusses strategies that are currently available or under development targeting prostaglandins, quorum-sensing, changing surface properties of biomedical devices, natural scaffolds, and small molecule-based chemical approaches to combat the threat of C. albicans biofilm. This review also highlights the recent developments in finding ways to increase the penetration of drugs into the extracellular matrix of biofilm using different nanomaterials against C. albicans.

Fe3O4@piroctone olamine magnetic nanoparticles: Synthesize and therapeutic potential in cutaneous leishmaniasis

BACKGROUND

In recent years, magnetic nanoparticles (NMP) as novel materials have been widely used for biomedical, diagnostic and therapeutic purposes like microbial infection therapy. The purpose of this study is to synthesize PO coated iron oxide magnetic nanoparticles (Fe3O4@PO NPs) and their anti-leishmanial effects in vitro and in vivo against cutaneous leishmaniasis.

METHODS

Fe3O4 magnetic nanoparticles were synthesized by the coprecipitation of Fe2 + and Fe3 + ions and used as a nanocarrier for the production of Fe3O4@PO NPs. The in vitro antileishmanial effects of PO-coated Fe3O4 NPs and Fe3O4 NPs (10-200 µg/mL) was determined against the intracellular amastigotes of Leishmania major (MRHO/IR/75/ER) and, then, examined on cutaneous leishmaniasis induced in male BALB/c mice by L. major. The rate of infectivity, production of nitric oxide (NO), and cytotoxic activates of Fe3O4 NPs and Fe3O4@PO NPs on J774-A1 macrophage cells were determined.

RESULTS

The size scattering of the Fe3O4 NPs and Fe3O4@PO NPs were in the range among 1-40 and 5-55 nm, respectively. The obtained IC₅₀ values were 62.3 ± 2.15 μg/mL, 31.3 ± 2.26 μg/mL, and 52.6 ± 2.15 μg/mL for the Fe3O4 NPs and Fe3O4@PO NPs, and MA, respectively. The results revealed that the mean number of parasites and the mean diameter of the lesions was considerably (p < 0.05) decreased in the infected mice treated with Fe3O4 NPs and Fe3O4@PO NPs. The Fe3O4 NPs and Fe3O4@PO NPs significantly (p < 0.05) prompted the production of NO as a dose-dependent manner. The promastigotes pre-incubated in Fe3O4 NPs and Fe3O4@PO NPs at the concentration of 5 µg/mL had the ability to infect only 41.7% and 28.3% of the macrophages cells. The selectivity index of greater than 10 for Fe3O4 NPs and Fe3O4@PO NPs showed its safety to the J774-A1 macrophage cells and specificity to the parasite.

CONCLUSION

The results of this survey indicated the high potency of Fe3O4@PO NPs to inhibit the growth of amastigote forms of L. major as well as recovery and improvement CL induced by L. major in BALB/c mice without significant cytotoxicity. The results also indicated that, although the possible anti-leishmanial mechanisms of Fe3O4@PO NPs have not been clearly understood, however, the triggering of NO may be considered as one of the possible anti-leishmanial mechanisms of these nanoparticles. However, additional studies, in particular in clinical contexts, are mandatory.

Sono-synthesis approach improves anticancer activity of ZnO nanoparticles: reactive oxygen species depletion for killing human osteosarcoma cells

Aim: To investigate the effect of ultrasound during the synthesis of ZnO nanoparticles (NPs) on their anticancer activity. Materials & methods: ZnO NPs were synthesized in the presence and absence of ultrasonic irradiation. Biological tests were performed on human osteosarcoma cancer cells (Saos-2). Results: The sono-synthesized sample indicated higher cytotoxicity than the conventional one. (IC₅₀ = 16.48 ± 0.41 μg/ml for sonochemical ZnO; 26.96 ± 0.33 μg/ml for conventional ZnO). Both sonochemical and conventional samples acted like antioxidants and reduced intracellular reactive oxygen species level. This reduction was more significant in cells treated with the sono-synthesized sample. The sono-synthesized ZnO NPs showed more tumor selectivity than the conventional sample. Conclusion: Sono-synthesis of ZnO NPs by a bath sonicator could improve their anticancer activity.

Synthesis, characterization, and biological screening of metal nanoparticles loaded gum acacia microgels

We report novel gum acacia (GA) based microgels composites for multifunctional biomedical application. High yield of spherical GA microgels particles within 5-50 μm size range was obtained via crosslinking the polymer in the reverse micelles of surfactant-sodium bis (2-ethylhexyl) sulfosuccinate (NBSS) in gasoline medium. The prepared microgels were then utilized for in situ silver (Ag) and cobalt (Co) nanoparticles (NPs) synthesis to subsequently produce GNAg and GNCo nanocomposite microgels, respectively. Ag and Co NPs of particle of almost less than 40 nm sizes were homogenously distributed over the matrices of the prepared microgels, and therefore, negligible agglomeration effect was observed. Pristine GA microgels, and the nanocomposite microgels were thoroughly characterized through FTIR, DSC, TGA, XRD, SEM, EDS, and TEM. The well-characterized pristine GA microgels and the nanocomposite microgels were then subjected to multiple in vitro bioassays including antioxidant, antidiabetic, and antimicrobial activities as well as biocompatibility investigation. Our results demonstrate that the prepared nanocomposites in particular GNAg microgels exhibited excellent biomedical properties as compared to pristine GA microgels. Among the prepared samples, GNAg nanocomposites were highly active against Fusarium oxysporum and Aspergillus niger that show 47.73% ± 0.25 inhibition and 32.3% ± 2.0 with IC-50 of 220 μg ml^-1 and 343 μg ml^-1 , respectively. Moderate antidiabetic activity was also observed for GNAg nanocomposites with considerable inhibition of 15.34% ± 0.20 and 14.7% ± 0.44 for both α-glucosidase and α-amylase, respectively. Moreover, excellent antioxidant properties were found for both the GNAg and GNCo nanocomposites as compared to pristine GA microgels. A remarkable biocompatible nature of the nanocomposites in particular GNAg makes the novel GA composites, to be exploited for diverse biomedical applications.

Comparison of antifungal and cytotoxicity activities of titanium dioxide and zinc oxide nanoparticles with amphotericin B against different Candida species: In vitro evaluation

BACKGROUND

Candida species are known to cause serious fungal infections that produce cutaneous, mucosal, and systemic infections. Nowadays, mortality and morbidity candidiasis in immunocompromised patients have increased. Nanotechnology is a new world-known technology and includes particles ranging from about 1 to 100 nanometers. The purpose of this study was to evaluate the antifungal and cytotoxicity activities of titanium dioxide nanoparticles (TiO2-NPs) and zinc oxide nanoparticles (ZnO-NPs) compared to amphotericin B (AmB) on different Candida spp in in vitro conditions.

METHODS

In the present study, susceptibility of different Candida species to TiO2-NPs and ZnO-NPs compared to AmB was determined by broth microdilution (BMD) and agar well diffusion methods. Cytotoxicity of TiO2-NPs and ZnO-NPs and amphotericin B was measured by MTT (3-(4, 5-Dimethylthiazol-2-yl)-2, 5-Diphenyltetrazolium Bromide) assay.

RESULTS

The results indicated that the TiO2-NPs and ZnO-NPs showed antifungal activities against pathogenic Candida spp. The minimum inhibitory concentration (MIC) and minimum fungicidal concentration (MFC) of TiO2-NP ranges against Candida spp. were 128-256 µg/mL and 256-512 µg/mL, respectively. The MIC and MFC values of ZnO-NPs were 64-128 µg/mL and 256-512 µg/mL, respectively. However, MICs and MFCs of AmB were 8-16 µg/mL and 16-32 µg/mL, respectively. The MTT assay results showed that the CC50% belonged to ZnO-NPs 706.2 μg/mL, for TiO2-NPs 862.1 μg/mL, and for AmB 70.19 μg/mL, respectively.

CONCLUSION

Our findings showed that TiO2-NPs and ZnO-NPs had antifungal effects against all Candida species, yet the antifungal properties of TiO2-NPs and ZnO-NPs were significantly less than those of AmB. The CC50% of AmB was significantly lower than ZnO-NPs and TiO2-NPs.

Inhibitory effect of magnetic iron-oxide nanoparticles on the pattern of expression of lanosterol 14α-demethylase (ERG11) in fluconazole-resistant colonising isolate of Candida albicans

Fluconazole-resistant Candida albicans is a big scary reality. The authors assessed the antifungal effects of magnetic iron-oxide nanoparticles on fluconazole-resistant colonising isolate of C. albicans and determined the expression of ERG11 gene, protein sequence similarity and ergosterol content. C. albicans isolates were characterised and fluconazole resistance is recognised using World Health Organization's WHONET software. Susceptibility testing of magnetic iron-oxide nanoparticles against fluconazole-resistant colonising isolate of C. albicans was performed according to Clinical and Laboratory Standards Institute guidelines. The expression patterns of ERG11 and protein sequence similarity were investigated. Ergosterol quantification has been used to gauge the antifungal activity of magnetic iron-oxide nanoparticles. The findings indicated that 93% of C. albicans isolates were resistant to fluconazole. Magnetic iron-oxide nanoparticles were presented activity against fluconazole-resistant colonising isolate of C. albicans with minimum inhibitory concentration at 250-500 µg/ml. The expression level of ERG11 gene was downregulated in fluconazole-resistant colonising isolate of C. albicans. The results revealed no differences in fluconazole-resistant colonising isolate of C. albicans by comparison with ERG11 reference sequences. Moreover, significant reduction was noted in ergosterol content. The findings shed a novel light on the application of magnetic iron-oxide nanoparticles in fighting against resistant C. albicans.

Bimetallic nickel-ferrite nanorod particles: greener synthesis using rosemary and its biomedical efficiency

Nickel-ferrite (NiFe₂O₄) nanorods particles (NRP) was biosynthesised for the first time by the Rosemary Extract. The NRP was fully characterised, including the type, nanostructure and physicochemical properties of using XRD, HRTEM, FeSEM, XPS, FTIR and VSM. TEM confirmed rod-shaped nano-sized particles with average sizes ranging from 10 nm to 28 nm. The EDAX Analysis showed the presence of iron, nickel, oxygen, and carbon. XRD analysis confirmed the synthesis of NiFe₂O₄ crystals. XPS curves showed photoelectron for iron, oxygen and nickel. EDS showed the atomic, weight percentages ratios of Ni(12%): Fe(24%) and: O(48) are close to the theoretical value (Ni: Fe:O = 1:2:4), of bimetallic magnetic NiFe₂O₄ NRP. NiFe₂O₄ NRP had cytotoxicity effect on MCF-7 cells survival which suggests that NiFe₂O₄ NRP can be used as a new class of anticancer agent in design novel cancer therapy research.

Antifungal effects of Lactobacillus acidophilus and Lactobacillus plantarum against different oral Candida species isolated from HIV/ AIDS patients: an in vitro study

Oropharyngeal Candidiasis (OPC) is an opportunistic fungal infection occurring in immunocompromised  patients such as HIV/AIDS. The purpose of this study was to evaluate the antifungal properties of Lactobacillus acidophilus and Lactobacillus plantarum on different Candida species isolated from oral cavity of HIV/AIDS patients compared to Fluconazole (FLC). In this study, the antifungal effects of both cells and cell-free supernatants (CFSs) of L. acidophilus and L. plantarum were investigated against different oral Candida species by co-aggregation, agar overlay interference and broth microdilution assays, respectively. Our results showed that the highest co-aggregation ratio of the two tested Lactic acid bacteria (LAB) was observed for C. krusei. Both L. acidophilus and L. plantarum at cell concentrations 10¹⁰ to 10² cfu/ml were able to inhibit the growth of most of the oral Candida species, except for C. albicans, and to some C. krusei. In this study, MIC and MFC values for CFS of L. acidophilus ranged from 100 to 200 µl/ml and 100 to 200 µl/ml, respectively, and MIC and MFC values for CFS of L. plantarum were 50 to 200 µl/ml and 50 to 200 µl/ml, respectively. The ranges of MIC and MFC for FLC were 256-1024 µg/ml and 512-2048 µg/ml, respectively. C. albicans and C. parapsilosis displayed the highest and least susceptibility to CFSs of two LAB, respectively. Our findings showed that both cells and CFSs of L. acidophilus and L. plantarum had antifungal effects against oral Candida species.

Synthesis, physical characterization, and antifungal and antibacterial activities of oleic acid capped nanomagnetite and cobalt-doped nanomagnetite

Nanoparticles, 10–14 nm, consisting of either Fe3O4 or Co0.2Fe2.8O4 stabilized with oleic acid, were prepared using solution combustion. Their structural and magnetic properties were examined using X-ray diffractometry, scanning electron microscopy, vibrating sample magnetometry, and Fourier-transform infrared spectroscopy. The properties of both sets of materials are similar, except that the cobalt-doped particles are considerably less magnetic. The in vitro inhibitory activities of the nanoparticles were assessed against pathogenic bacteria Shigella dysenteriae, Klebsiella pneumoniae, Acinetobacter baumannii, Streptococcus pyogenes, and pathogenic fungi and molds Candida albicans, Fusarium oxysporum, and Aspergillus fumigatus. The magnetite nanoparticles were moderately effective against all tested pathogens, but the activity of the cobalt-doped nanoparticles was significantly lower, possibly due to an interruption of the Fenton reaction at the bacterial membrane. This work suggests that potentially doping magnetite with stronger metal oxidants may instead enhance their antimicrobial effects.

Metallic SPIONP/AgNP synthesis using a novel natural source and their antifungal activities

The green synthesis of nanoparticles (NPs) is important because of the favorable potential of plant biomolecules involved in the synthesis of NPs. This study aimed to provide a fast, easy, cheap, and environmentally friendly method for the synthesis of superparamagnetic iron oxide NPs (SPIONP) and silver nanoparticles (AgNPs) using Stachys lavandulifolia and an evaluation of their use as antifungal agents against Aspergillus niger and Fusarium solani. The physicochemical properties of AgNPs and SPIONPs were studied using FESEM, HRTEM, XRD, VSM, UV-Vis, and EDX spectroscopy. The sizes and morphologies of the AgNPs and SPIONPs, measured via electron microscopy, were 12.57 nm and 10.70 nm, respectively. Nanoparticles have previously been shown to have antifungal activities, and SPIONPs and AgNPs can show antifungal resistance. These NPs can be used as a substitute for widely used toxic fungicides to promote food safety and public health.

AgNPs and SPIONPs showed inhibitory effects against the radial growth of the mycelia of the pathogenic fungi A. niger and F. solani.

Potential of Nanoparticles in Combating Candida Infections

Aims:

The aim of this review is to survey the recent progress made in developing the nanoparticles as antifungal agents especially the nano-based formulations being exploited for the management of Candida infections.

Discussion:

In the last few decades, there has been many-fold increase in fungal infections including candidiasis due to the increased number of immunocompromised patients worldwide. The efficacy of available antifungal drugs is limited due to its associated toxicity and drug resistance in clinical strains. The recent advancements in nanobiotechnology have opened a new hope for the development of novel formulations with enhanced therapeutic efficacy, improved drug delivery and low toxicity.

Conclusion:

Metal nanoparticles have shown to possess promising in vitro antifungal activities and could be effectively used for enhanced and targeted delivery of conventionally used drugs. The synergistic interaction between nanoparticles and various antifungal agents have also been reported with enhanced antifungal activity.

Biosynthesis of bimetallic and core-shell nanoparticles: their biomedical applications - a review

Recently, researchers succeeded in designing and manufacturing a new class of nanoparticles (NPs) called hybrid NPs. Among hybrid NPs, bimetallic and core-shell NPs were a revolutionary step in NPs science. A large number of green physiochemical and methods for nanostructures synthesis have been published. Eventually, physiochemical methods are either expensive or require the use of chemical compounds for the synthesis of bimetallic and core-shell nanostructures. The main challenges that scientists are facing are making the process cheaper, facile and eco-friendly efficient synthesis process. Green synthesis (biosynthesis) refers to the use of bio-resources (such as bacteria, fungi, plants or their derivatives) for the synthesis of nanostructures. The popularity of the green synthesis of nanostructures is due to their environmental friendliness and no usage of toxic materials, environmental friendliness for the synthesis or stability of nanostructure. Bimetallic and core-shell NPs have many biomedical applications such as removing heavy metals, parasitology, molecular and microbial sensor, gene carrier, single bacterial detection, oligonucleotide detection and so on. The purpose of this study is to discuss briefly the biosynthesised bimetallic and core-shell NPs, their biomedical applications.

Core@shell Nanoparticles: Greener Synthesis Using Natural Plant Products

Among an array of hybrid nanoparticles, core-shell nanoparticles comprise of two or more materials, such as metals and biomolecules, wherein one of them forms the core at the center, while the other material/materials that were located around the central core develops a shell. Core-shell nanostructures are useful entities with high thermal and chemical stability, lower toxicity, greater solubility, and higher permeability to specific target cells. Plant or natural products-mediated synthesis of nanostructures refers to the use of plants or its extracts for the synthesis of nanostructures, an emerging field of sustainable nanotechnology. Various physiochemical and greener methods have been advanced for the synthesis of nanostructures, in contrast to conventional approaches that require the use of synthetic compounds for the assembly of nanostructures. Although several biological resources have been exploited for the synthesis of core-shell nanoparticles, but plant-based materials appear to be the ideal candidates for large-scale green synthesis of core-shell nanoparticles. This review summarizes the known strategies for the greener production of core-shell nanoparticles using plants extract or their derivatives and highlights their salient attributes, such as low costs, the lack of dependence on the use of any toxic materials, and the environmental friendliness for the sustainable assembly of stabile nanostructures.

Evaluation of biofilm formation ability in different Candida strains and anti-biofilm effects of Fe3O4-NPs compared with Fluconazole: an in vitro study

OBJECTIVE

Biofilm formation ability is one of the major virulence factors contributing to the pathogenesis of Candida species. Biofilms produced by Candida spp. cause complicated treatments and contribute to increasing unpleasant mortality rates. Nanoparticles of Fe₃O₄ (Fe₃O₄-NPs) are considered due to their magnetic and biochemical properties, as well as their low costs. The purpose of present study was to determine biofilm formation ability in different Candida strains and evaluation of anti-biofilm effect of Fe₃O₄-NPs compared with FLC.

MATERIALS AND METHODS

In this study, the biofilm-forming ability of Candida strains and the inhibitory effects of Fe₃O₄-NPs on Candida strains biofilms compared with FLC were measured by MTT assay.

RESULTS

Our finding showed that the biofilm formation ability of C. lusitaniae was significantly higher than other tested Candida strains. However, all the studied Candida strains produced high degree of biofilms. The biofilm formation in different Candida strains was inhibited at concentrations ≥1000μg/mL to ≥4000μg/mL for Fe₃O₄-NPs and ≥512μg/mL to ≥2048μg/mL for FLC. After exposure to various concentrations of Fe₃O₄-NPs, biofilm formation reduction in C. albicans and C. parapsilosis were more than FLC. Although, this reduction was not significant. A significant reduction (P<0.05) was observed in biofilm formation in presence of FLC compared with Fe₃O₄-NPs in C. krusei, C. tropicalis, and C. lusitaniae. The inhibitory effects of Fe₃O₄-NPs and FLC on biofilm formation of C. glabrata were approximately equal.

CONCLUSION

In accordance with the findings, the biofilm reduction effect of FLC for C. krusei, C. tropicalis, and C. lusitaniae were statistically higher than Fe₃O₄-NPs.

Onychomycosis due to dermatophytes species in Iran: Prevalence rates, causative agents, predisposing factors and diagnosis based on microscopic morphometric findings

OBJECTIVE

Onychomycosis (OM) or fungal nail infection is one of the most common fungal infections, which is increasingly prevalent. OM is caused by dermatophytes spp, yeasts and non-dermatophyte moulds (NDMs). The purpose of this study was to identify and determine the prevalence rates, predisposing factors and causative agents of OM using clinical symptoms and microscopic morphometric findings.

MATERIALS AND METHODS

In the present study, 180 patients suspected of OM were evaluated by direct microscopy using KOH 20%, culturing in Mycosel and Sabouraud dextrose agar media and Olysia software for identifying the causative fungi of OM.

RESULTS

From 180 referred patients, 118 (65.56%) had OM, of whom 79 (66.94%) were positive for infection with dermatophytes spp. Of the 79 cases, the commonest age group was 61-70 years (21%) with males being 46 (58.23%) and females being 33 (41.77%). Both the fingernail and toenail infections were most prevalent in male patients. Sex, diabetes and age above 60 years were significant predisposing factors for OM development. DLSO was observed as the only clinical pattern of OM and T. rubrum was the commonest dermatophyte isolate (49.34%).

CONCLUSION

This study showed that T. rubrum was the most common dermatophyte agent of OM in Iran.

Evaluation of Antibacterial Activity of Iron Oxide Nanoparticles Against Escherichia coli

Introduction: Considering the usefulness of metal oxide nanoparticles in biology and biomedicine, iron oxide nanoparticles were biosynthesized using bioresource engineering to evaluate its antibacterial activity against Escherichia coli. Methods: Macrodilution method was used for calculating the lowest concentration which prevented the growth of bacteria (minimum inhibitory concentration [MIC]), and the lowest concentration that destroyed all bacterial cells (minimum bactericidal concentration [MBC]). Results: The lowest concentration of iron oxide nanoparticles that inhibited the growth of E. coli (MIC) was recorded at 250 µg/mL. On the other hand, the MBC of iron oxide nanoparticles was calculated at 500 µg/mL. Conclusion: Iron oxide nanoparticles were produced by a green and eco-friendly, simple and inexpensive method. The results showed the inhibitory effect of iron oxide nanoparticles on E. coli at 250 µg/mL. This may suggest using these nanoparticles as potential antibacterial agents.

Effect of biogenic selenium nanoparticles on ERG11 and CDR1 gene expression in both fluconazole-resistant and -susceptible Candida albicans isolates

Background and Purpose

Candida albicans is the most common Candida species (sp.) isolated from fungal infections. Azole resistance in Candida species has been considerably increased in the last decades. Given the toxicity of the antimicrobial drugs, resistance to antifungal agents, and drug interactions, the identification of new antifungal agents seems essential. In this study, we assessed the antifungal effects of biogenic selenium nanoparticles on C. albicans and determined the expression of ERG11 and CDR1 genes.

Materials and Methods

Selenium nanoparticles were synthesized with Bacillus sp. MSH-1. The ultrastructure of selenium nanoparticles was evaluated with a transmission electron microscope. The antifungal susceptibility test was performed according to the modified Clinical and Laboratory Standards Institute M27-A3 standard protocol. The expression levels of the CDR1 and ERG11 genes were analyzed using the quantitative real-time polymerase chain reaction (PCR) assay.

Results

The azole-resistant C. albicans and wild type C. albicans strains were inhibited by 100 and 70 µg/mL of selenium nanoparticle concentrations, respectively. The expression of CDR1 and ERG11 genes was significantly down-regulated in these selenium nanoparticle concentrations.

Conclusion

As the findings indicated, selenium nanoparticles had an appropriate antifungal activity against fluconazole-resistant and -susceptible C.albicans strains. Accordingly, these nanoparticles reduced the expression of CDR1 and ERG11 genes associated with azole resistance. Further studies are needed to investigate the synergistic effects of selenium nanoparticles using other antifungal drugs.

Epidemiology of dermatomycoses in Kerman province, southeast of Iran: A 10-years retrospective study (2004-2014)

OBJECTIVES

Superficial and cutaneous fungal infections (SCFIs) are an important public health problem and are common in tropical and subtropical countries. Pityriasis versicolor, dermatophytosis, erythrasma, onychomycosis, and otomycosis are the major diseases associated with SCFIs. The aim of this study was to evaluate the prevalence and causative agents of dermatomycoses over a period of 10 years in Kerman province, southeast of Iran.

METHODS

A number of 1782 subjects, including 1096 females and 686 males, with cutaneous disorders in their skin, nail, and hair suspected to have SCFIs participated in this study. The collected specimens were examined using direct microscopy examination, staining, culture on specific media and PCR-RFLP technique.

RESULTS

In total, 617 (34.62%) subjects had SCFIs, of whom 290 (47%) were female and 327 (53%) were male. Identified SCFIs included yeast infections, dermatophytosis, saprophyte onychomycosis, erythrasma, and otomycosis due to non-dermatophytic molds (NDMs). The highest prevalence of dermatomycoses was found among the 41-50-year and 31-40-year age groups. Tinea unguium was the most common clinical pattern of dermatomycoses, and T. mentagrophytes was the predominant agent. Also, Aspergillus spp. were the most common NDMs agents of onychomycosis and otomycosis.

CONCLUSIONS

This study summarized the epidemiological trends and etiologic agents of SCFIs in a 10-year period in Kerman, southeast of Iran. Consideration of the current epidemiologic trends in the prevalence and knowledge of the exact causative agents of SCFIs may play an important key role towards further investigations, diagnosis, and modification of current treatments.