Endovascular healing is inadequate for fixation of Dacron stent-grafts in human aortoiliac vessels

Complementary roles of open and hybrid approaches to thoracoabdominal aortic aneurysm repair

OBJECTIVE

Thoracoabdominal aortic aneurysm (TAAA) repair remains a significant challenge with considerable perioperative morbidity and mortality. A hybrid approach utilizing visceral debranching with endovascular aneurysm exclusion has been used to treat high-risk patients and therefore allow repair in more patients. Limited data exist regarding long-term outcomes with this procedure as well as comparison to conventional open repair. This study describes our institutional algorithmic approach to TAAA repair using both open and hybrid techniques.

METHODS

Hybrid and open TAAA repairs performed between July 2005 and August 2015 were identified from a prospectively maintained institutional aortic surgery database. Perioperative morbidity and mortality, freedom from reintervention, and long-term and aorta-specific survival were calculated and compared between the two groups.

RESULTS

During the study period, 165 consecutive TAAA repairs were performed, including 84 open repairs and 81 hybrid repairs. Patients in the hybrid repair group were significantly older, were more frequently female, and had a generally greater comorbid disease burden, including significantly more chronic kidney disease. Despite the older and sicker cohort, there was no difference in in-hospital mortality between the two groups (9.9% hybrid vs 7.1% open; P = .59). Major morbidity rates differed by procedure, with patients undergoing open repair having a significantly higher rate of postoperative stroke (9.5% open vs 0% hybrid; P = .017), whereas patients undergoing hybrid repair had a higher rate of new permanent dialysis (14.8% hybrid vs 3.6% open; P = .043). There was no difference between groups in the rate of postoperative permanent paraplegia/paresis (8.3% open vs 7.4% hybrid; P = .294). There was a significantly increased rate of reintervention in the hybrid repair group (12.3% hybrid vs 1.2% open, P = .004), with all hybrid reinterventions performed because of endoleak. One-year survival was similar between groups at 69% in hybrid repairs vs 77% in open repairs. Long-term survival was worse in the hybrid group (5-year survival, 32% hybrid vs 56% open), although late survival appeared to be influenced mainly by comorbid disease burden, given the similar long-term aorta-specific survival between groups.

CONCLUSIONS

Use of an algorithmic approach whereby higher risk patients with TAAA are treated by a hybrid approach and lower risk patients with conventional open repair yields satisfactory short- and long-term outcomes. The availability of multiple options for TAAA repair within a single center likely allows repair in more patients with consequent decrease in the risk of aorta-related death, at the expense of increased reinterventions for endoleak.

Improvement in Proximal Aortic Endograft Fixation: An Experimental Study Using Different Stent-Grafts in Human Cadaveric Aortas

Purpose:

To compare the proximal fixation characteristics of different types of stent-grafts (SG) and the adjunctive effect of a proximally placed Palmaz stent.

Methods:

Human cadaveric aortas were obtained at autopsy and cut into 30 aortic segments. Appropriately oversized (10% to 20%) commercial stent-grafts (Zenith, Ancure, Excluder, Talent) and 4 configurations of homemade Palmaz-based stent-grafts (polytetrafluoroethylene or polyester coverings each with no uncovered proximal edge or a 20-mm bare section of stent) were implanted 20 mm into an aortic segment and balloon dilated. Each segment was placed in an experimental apparatus to measure the dislodgment force. Bare Palmaz stents were used to reinforce the proximal fixation of the commercial stent-grafts, and the measurements were repeated. Manual anastomoses were made and their dislodgment force tested for comparison.

Results:

The median dislodgment force ranged from 6.5 N for the Excluder to 26.5 N for the Zenith (8.0 N for the Talent, 11.8 N for the Ancure, and 8.1 to 10.7 N for the various Palmaz stent-graft designs). There was no significant difference between the Zenith and the Ancure groups or between the Excluder and the Talent groups. However, the Zenith and Ancure devices required significantly higher (p = 0.0004) force (∼25%) to displace them than the other stent-grafts tested. With the Palmaz stent added to the proximal attachment site, the median dislodgment force for the different commercial endografts was significantly improved for all devices (p < 0.03): 34% for the Zenith device, 69% for the Ancure, 73% for the Talent, and 80% for the Excluder endoprosthesis.

Conclusions:

The Zenith stent-graft had the best resistance to dislodgment. An additional Palmaz stent placed at the proximal attachment site greatly improves endograft fixation regardless of the type of stent-graft. For complex aneurysm necks or for intraoperative type I endoleak management, an adjunctive Palmaz stent could be used.

Use of Proximal Aortic Cuffs as an Adjunctive Procedure during Endovascular Aortic Aneurysm Repair

The purpose of this study was to evaluate the incidence and durability of additional proximal cuffs during endovascular abdominal aortic aneurysm repair (EVAR). A retrospective review of 90 EVAR patients was conducted. Postoperative survival, proximal sealing zone–related complications, and secondary procedures were analyzed.

Additional proximal cuffs were used in 11%. Their use did not affect postoperative survival ( p = .58), type I endoleak rate (4.4%; p = .19), or the need for sealing zone–related secondary procedures (6.3%; p = .38) compared with patients without cuff placement but was related to a higher cumulative graft migration rate (2.2% overall p = .02). Two patients (2.5%; p = .79) underwent conversion to open surgery, both for proximal sealing zone–related complications.

Application of proximal cuffs appears to be an effective intraoperative adjunctive procedure to achieve a proximal seal during EVAR, with favorable midterm results. However, the risk of late endograft migrations may be elevated in this group.

A sustained-release drug-delivery system of synthetic prostacyclin agonist, ONO-1301SR: a new reagent to enhance cardiac tissue salvage and/or regeneration in the damaged heart

Cardiac failure is a major cause of mortality and morbidity worldwide, since the standard treatment for cardiac failure in the clinical practice is chiefly to focus on removal of insults against the heart or minimisation of additional factors to exacerbate cardiac failure, but not on regeneration of the damaged cardiac tissue. A synthetic prostacyclin agonist, ONO-1301, has been developed as a long-acting drug for acute and chronic pathologies related to regional ischaemia, inflammation and/or interstitial fibrosis by pre-clinical studies. In addition, poly-lactic co-glycolic acid-polymerised form of ONO-1301, ONO-1301SR, was generated to achieve a further sustained release of this drug into the targeted region. This unique reagent has been shown to act on fibroblasts, vascular smooth muscle cells and endothelial cells in the tissue via the prostaglandin IP receptor to exert paracrinal release of multiple protective factors, such as hepatocyte growth factor, vascular endothelial growth factor or stromal cell-derived factor-1, into the adjacent damaged tissue, which is salvaged and/or regenerated as a result. Our laboratory developed a new surgical approach to treat acute and chronic cardiac failure using a variety of animal models, in which ONO-1301SR is directly placed over the cardiac surface to maximise the therapeutic effects and minimise the systemic complications. This review summarises basic and pre-clinical information of ONO-1301 and ONO-1301SR as a new reagent to enhance tissue salvage and/or regeneration, with a particular focus on the therapeutic effects on acute and chronic cardiac failure and underlying mechanisms, to explore a potential in launching the clinical study.

Patient demographics and cardiovascular risk factors differentially influence geometric remodeling of the aorta compared with the peripheral arteries

BACKGROUND

Detailed knowledge of the dimensions and shape of the main arteries of the body and how they change with age and disease is important for understanding arterial pathophysiology and improving minimally invasive devices to treat arterial diseases. Our goal was to describe and compare geometric remodeling of the aorta and peripheral arteries in the context of patient demographics and cardiovascular risk factors.

METHODS

Three-dimensional reconstructions of computed tomography angiography scans were performed in 122 subjects 5-93 years of age (mean 47 ± 24 years, 64 M/58 F). Best-fit arterial diameters, lengths, and tortuosity for the principle named arteries in the chest, abdomen, pelvis, and upper thigh were measured, and multiple linear regression analysis was performed to examine how these morphologic parameters associate with patient demographics and risk factors.

RESULTS

Large elastic arteries increased their diameter, length, and tortuosity with age, whereas muscular arteries primarily became more tortuous. Demographics and risk factors explained >70% of the variation in diameters of the abdominal aorta, paravisceral aorta, and the aortic arch; and >75% of variation in tortuosity from the profunda femoris to the brachiocephalic artery. Male sex, larger body mass index, and hypertension contributed to larger diameters, whereas the presence of diabetes was associated with somewhat-straighter arteries. Overall, the effects of cardiovascular risk factors on geometric remodeling were small compared with those of demographics.

CONCLUSION

The geometry of the vascular tree is greatly affected by aging, demographics, and some risk factors. Elastic and muscular arteries remodel differently, possibly as the result of differences in their microstructure.

Aortic dissection occurring 18 months after successful endovascular repair in an anatomically difficult case of abdominal aortic aneurysm

We report an autopsy case of aneurysm dissection that occurred 18 months after the implantation of a Zenith stent graft. A 94-year-old woman, who had undergone an endovascular repair with postoperative reintervention, died of shock due to retroperitoneal hematoma. An autopsy indicated that the stent graft remained firmly fixed to the native aorta, whereas the dissection occurred near the proximal edge of the stent graft but not at the point of attachment between the suprarenal stent hook and the aorta. The luminal surface of the stent graft was almost completely covered with a transparent film with an endothelial cell lining, which might reflect the tissue regeneration observed on histological examination. This was a rare case of acute aortic dissection that occurred 18 months after EVAR, in which the autopsy indicated interesting microscopic findings and the mechanisms underlying the aortic dissection. We believe that aggressive reintervention at the proximal site in elderly women might cause the dissection of the native aorta.

Hemodynamic variations due to spiral blood flow through four patient-specific bifurcated stent graft configurations for the treatment of abdominal aortic aneurysms

Endovascular repair is now a recognised procedure for treating abdominal aortic aneurysms. However, post-operative complications such as stent graft migration and thrombus may still occur. To assess these complications numerically, the correct input boundary conditions, which include the full human aorta with associated branching, should be included. Four patient-specific computed tomography scanned bifurcated stent grafts (SGs) were modelled and attached onto a full human aorta, which included the ascending, aortic arch and descending aortas. Two of the SG geometries had a twisted leg configuration, while the other two had conventional nontwisted leg configurations. Computational fluid dynamics was completed for both geometries and the hemodynamics assessed. The complexity of the flow patterns and secondary flows were influenced by the inclusion of the full human aorta at the SG proximal section. During the decelerating phase significant recirculations occurred along the main body of all SG configurations. The inclusion of the full human aorta did not impact the velocity contours within the distal legs and there was no difference in drag forces with the SG containing the full human aorta and those without. A twisted leg configuration further promoted a spiral flow formation along its distal legs.

Infection of endovascular abdominal aortic aneurysm stent graft after urosepsis: case report and review of the literature

Infection of endovascular abdominal aneurysm stent grafts is an uncommon but known complication. Inoculation with bacteria of the endovascular abdominal aneurysm stent graft during the actual implantation, in the periprocedural hospitalization or later due to an aortoenteric fistula, has been described in the literature. We report a case of endovascular abdominal aortic aneurysm stent graft infection occurring 40 months after implantation in a patient doing well up to an episode of urosepsis. In conclusion, we postulate that poor intraluminal healing of stent grafts, as observed in several explant studies, may result in a higher susceptibility to episodes of bacteremia than prosthetic vascular grafts inserted during open repair. We therefore consider the administration of prophylactic antibiotics in patients with endovascular stent grafts during periods with a likelihood of bacteremia.

Chondroitin sulfate and epidermal growth factor immobilization after plasma polymerization: a versatile anti-apoptotic coating to promote healing around stent grafts

Bioactive coatings constitute an interesting approach to enhance healing around implants, such as stent-grafts used in endovascular aneurysm repair. Three different plasma techniques, namely NH₃ plasma functionalization and atmospheric- or low-pressure plasma polymerization, are compared to create amino groups and covalently bind CS and EGF bioactive molecules on PET. The latter presents the greatest potential. CS + EGF coating is shown to strongly decrease cell apoptosis and cell depletion in serum-free medium, while increasing cell growth compared to unmodified PET. This versatile biomimetic coating holds promise in promoting vascular repair around stent-grafts, where resistance to apoptosis is a key issue.

Thoracic endovascular aortic repair with homemade stent grafts: early and mid-term outcomes

PURPOSE

We reviewed our experience with homemade stent grafts in the repair of a variety of thoracic aortic lesions. The objective of this study was to assess the early and mid-term outcomes of this therapy.

METHODS

From 1999 to 2007, homemade stent grafts were inserted in 88 patients with an atherosclerotic aneurysm, dissection, pseudoaneurysm, trauma, or rupture in the thoracic aorta. The endoprostheses were stainless steel Z-stents covered by a polyester graft, and were custom-designed for each patient.

RESULTS

Placement of stent grafts was technically successful in 81 of the 88 patients (92%). Within 30 days after treatment, 3 patients died, 3 had a cerebral infarction, and 3 had onset of paraplegia or paraparesis. Primary endoleaks were observed in 8 patients (9%). During the mean follow-up period of 32 ± 26 months, 7 patients had persistent endoleaks and 7 had stent-graft migration. The aneurysm-related mortality rate was 7%. The rate of freedom from open-surgery conversion at 32 months was 89.0%.

CONCLUSIONS

Our early experience with elective and emergency thoracic endovascular aortic repair using homemade stent grafts provided therapeutic benefits to high-risk patients. Endoleaks and stent-graft migrations were the factors most commonly responsible for secondary intervention in the mid-term period. Careful follow-up of patients treated with this approach is needed to avoid major complications in the long term.

Fatores envolvidos na migração das endopróteses em pacientes submetidos ao tratamento endovascular do aneurisma da aorta abdominal

A migração da endoprótese é complicação do tratamento endovascular definida como deslocamento da ancoragem inicial. Para avaliação da migração, verifica-se a posição da endoprótese em relação a determinada região anatômica. Considerando o aneurisma da aorta abdominal infrarrenal, a área proximal de referência consiste na origem da artéria renal mais baixa e, na região distal, situa-se nas artérias ilíacas internas. Os pacientes deverão ser monitorizados por longos períodos, a fim de serem identificadas migrações, visto que estas ocorrem normalmente após 2 anos de implante. Para evitar migrações, forças mecânicas que propiciam fixação, determinadas por características dos dispositivos e incorporação da endoprótese, devem predominar sobre forças gravitacionais e hemodinâmicas que tendem a arrastar a prótese no sentido caudal. Angulação, extensão e diâmetro do colo, além da medida transversa do saco aneurismático, são importantes aspectos morfológicos do aneurisma relacionados à migração. Com relação à técnica, não se recomenda implante de endopróteses com sobredimensionamento excessivo (> 30%), por provocar dilatação do colo do aneurisma, além de dobras e vazamentos proximais que também contribuem para a migração. Por outro lado, endopróteses com mecanismos adicionais de fixação (ganchos, farpas e fixação suprarrenal) parecem apresentar menos migrações. O processo de incorporação das endopróteses ocorre parcialmente e parece não ser suficiente para impedir migrações tardias. Nesse sentido, estudos experimentais com endopróteses de maior porosidade e uso de substâncias que permitam maior fibroplasia e aderência da prótese à artéria vêm sendo realizados e parecem ser promissores. Esses aspectos serão discutidos nesta revisão.

Complete Endograft Collapse 9½ Years Following Endograft Repair of an Abdominal Aortic Aneurysm

Endografts are a common method of treating abdominal aortic aneurysms (AAA) because of the short-term benefits of endovascular aneurysm repair (EVAR). However, the short-term benefits of endovascular repair must be balanced against long-term complications, such as the need for conversion to open repair, device migration, persistent or de novo endoleaks, and most concerning the potential for subsequent rupture of the aneurysm. Lifelong postimplantation surveillance is mandatory because the incidence of some complications increases over time. This report describes our recent experience in a patient in whom complete endograft collapse was discovered 9½ years following EVAR necessitating conversion to open repair.

Durability of endovascular infrarenal aneurysm repair: when does late failure occur and why?

The first commercially available stent grafts were unable to withstand the hemodynamic forces of the vascular environment. The past 15 years have seen a gradual improvement in long-term stent graft performance as designs evolved through the elimination of features associated with late failure and the replication of features associated with durable success. Clinical experience provides the following principles on which to base device design and implantation techniques. Few patients have an adequate length of non-dilated aorta distal to the aneurysm to allow implantation of an aorto-aortic stent graft; bifurcated stent grafts are usually required for AAA repair. Friction, column strength and tissue ingrowth do not prevent migration of the stent graft from its attachment within the neck into the aneurysm; some form of active fixation is required, usually in the form of barbs. Any movement between the apex of a stent and the overlying graft material will erode the fabric; stents and grafts need to move as a single unit. Nitinol is versatile, but fragile; Nitinol components must be polished to eliminate all surface irregularities and they cannot be subjected to compression loading, or excessive pulsatile movement. The neck of an aneurysm is unstable; it will dilate unless protected by a securely fixed, non-compliant stent graft. The aneurysm does not heal; freedom from risk of rupture depends on durable depressurization of the sac. The sole objective of image-based follow-up is the early detection, and catheter-based correction, of device failure. Once any given design has been in use long enough to identify its failure modes, the frequency of follow-up studies can be adjusted accordingly. However, it takes a long time to identify all the potential forms of late failure, and pre-clinical testing remains an imprecise science. New, or recently modified, devices cannot necessarily be assumed to be as durable as their predecessors.

Analysis of explanted Latecba modular stent-grafts deployed transrenally to repair AAAs with short necks in 29 dogs

Twenty-nine modular stent-grafts deployed transrenally to repair AAAs with short necks in dogs were harvested at autopsy of the animals after scheduled durations of implantations of 10 days, one month, three months, and six months. Analyses of the explanted devices included non-destructive techniques such as gross observations, X-rays CT scan, IVUS and angioscopy. Further to appropriate dissection, histological investigations were carried out by means of scanning electron microscopy (SEM) and light microscopy. All the 29 specimens were extensively encapsulated with fibrous tissues but the fibrous capsule was thin in six of them; four capsules were ulcerated. The X-rays confirmed the stability of the devices that were still straight (12), slightly bent (12) or bent (4). The modules were misaligned in only one case. IVUS and angioscopy confirmed the patency of all the stent-grafts with thin internal capsules both proximally and distally with variable capsulation in the mid-section of the grafts. The left renal artery orifices were found to be patent at dissection with no obstruction to flow. The luminal flow surface of the stent-grafts was smooth and glistening proximally and distally containing endothelial like cells and vasa-vasorum. Poor healing was noted in the aneurysm area. Transrenal deployment of this modular stent-graft is feasible and gave excellent results with regard to biofunctionality and biocompatibility. The device proved to be safe and efficient.

Transrenal deployment of a modular stent graft to repair AAAs with short necks: experiments in dogs

Severely angulated (> 60 degrees ) or short (< 15 mm) proximal necks remain significant anatomical limitations for endovascular stent-graft repairs for abdominal aortic aneurysms. Ensuring proper proximal fixation of the stent-graft to the host artery without the short-or long-term risks of endoleak or migration represents a particular technical challenge for these anatomical circumstances. An innovative balloon expandable stent combined with a weft-knitted prosthesis was specifically designed for these situations by modelling the stent to the neck anatomy without overdistension or potential barotrauma allowing better incorporation of the device. The Latecba stent-graft consists of a 2 parts modular design. The first one, Module A, is deployed at the transrenal level and consists of a Palmaz type stent whose first half is bare and second half is sutured to a crimped weft-knitted polyester graft whose distal end holds a constriction. The second Module B is a non-crimped weft-knitted graft attached to 2 stainless steel stents. The first stent is entirely contained in the proximal textile tube, allowing fixation to module A. The second stent, which is left uncovered over the distal third, ensures proper fixation of the stent-graft distally. Following the creation of a prosthetic aneurysm in the infrarenal aorta in 32 dogs, 29 received the Latecba stent-graft for scheduled durations of 10 days, 1 month, 3 months and 6 months. Proper deployment of the stent-grafts was achieved without difficulty. All 29 animals survived and the devices were all patent at sacrifice. No device defects or migrations were observed and the stent-grafts proved to be efficient in this setting to exclude the aneurysm. Analyses of the explanted devices (gross observations, RX, CT scan, IVUS, angioscopy) confirmed the stability of this modular stent-graft. Further on-going clinical investigations are warranted to validate this concept before this stent-graft becomes commercially available without any restriction.

Endovascular aneurysm repair: current and future status

Endovascular aneurysm repair has rapidly expanded since its introduction in the early 1990s. Early experiences were associated with high rates of complications including conversion to open repair. Perioperative morbidity and mortality results have improved but these concerns have been replaced by questions about long-term durability. Gradually, too, these problems have been addressed. Challenges of today include the ability to roll out the endovascular technique to patients with adverse aneurysm morphology. Fenestrated and branch stent-graft technology is in its infancy. Only now are we beginning to fully understand the advantages, limitations, and complications of such technology. This paper outlines some of the concepts and discusses the controversies and challenges facing clinicians involved in endovascular aneurysm surgery today and in the future.

Development of endovascular stent-grafts

The very first experiences in the early 1990s with endovascular aortic stent-grafts were associated with significant numbers of complications including an inability to deploy the stent-graft, conversion to open surgery, and aneurysm rupture. By the mid-1990s, improved home-made and commercially available stent-grafts started to appear. These devices could be successfully deployed in the aorta, achieving aneurysm exclusion with low morbidity and mortality. However, follow-up results raised concerns about the longer-term durability. Gradually, too, these problems have been addressed such that, in the recent UK multi-centre randomized controlled trial of endovascular versus open aneurysm repair, aneurysm-related mortality was 3 per cent less in the endovascular group four years following surgery. Currently the indications for aortic stent-grafts are being expanded. It is now possible to maintain perfusion successfully in aortic side branches and to treat aneurysms that would have once been thought untreatable. This review paper reviews the main developments in endovascular stent-grafting and the major role played by medical engineering and technology.

Chondroitin-4-Sulfate: A Bioactive Macromolecule to Foster Vascular Healing around Stent-Grafts after Endovascular Aneurysm Repair

Deficient healing after endovascular aneurysm repair with a stent-graft is thought to be related to pro-apoptotic environment in abdominal aortic aneurysms and inertness of graft materials. We developed a bioactive coating containing chondroitin-4-sulfate and assessed its potential to improve cell adhesion, viability and resistance to apoptosis on PET surfaces. Coatings of collagen type I and CS were prepared and characterized by DMMB, FT-IR, DSC, SEM and contact angle goniometry. Preliminary cell culture experiments with vascular smooth muscle cells showed increased adhesion and viability in serum-free medium on CS-coated surfaces compared to control PET films.

Nitrogen-rich coatings for promoting healing around stent-grafts after endovascular aneurysm repair

Complications following endovascular aneurysm repair (EVAR) are related to deficient healing around the stent-graft (SG). New generations of SG with surface properties that foster vascular repair could overcome this limitation. Our goal was to evaluate the potential of a new nitrogen-rich plasma-polymerised biomaterial, designated PPE:N, as an external coating for polyethylene terephtalate (PET)- or polytetrafluoro-ethylene (PTFE)-based SGs, to promote healing around the implant. Thin PPE:N coatings were deposited on PET and PTFE films. Then, adhesion, growth, migration and resistance to apoptosis of vascular smooth muscle cells (VSMCs) and fibroblasts, as well as myofibroblast differentiation, were assessed in vitro. In another experimental group, chondroitin sulphate (CS), a newly described mediator of vascular repair, was added to normal culture medium, to search for possible additional benefit. PPE:N-coatings, especially on PET, increased and accelerated cell adhesion and growth, compared with control PET and with standard polystyrene culture plates (PCP). PPE:N was also found to increase the resistance to apoptosis in VSMC, an important finding as aneurysms are characterised by VMSC depletion caused by a pro-apoptotic phenotype. Addition of CS in solution further increased migration and resistance to apoptosis. In conclusion, PPE:N-coating and/or CS could promote vascular repair around SGs following EVAR.

Implant Degradation and Poor Healing After Endovascular Repair of Abdominal Aortic Aneurysms: An Analysis of Explanted Stent-Grafts

PURPOSE

To study explanted stent-grafts to achieve a better understanding of the mechanisms of failure after endovascular treatment of abdominal aortic aneurysms (AAA).

METHODS

Twelve stent-grafts were harvested at autopsy (n=3) or during surgical conversion (n=9). Device alterations were investigated by macroscopic examination, radiography, and surface analysis techniques. Healing around the implants was studied via histology and immunohistochemistry, with particular attention to the stent-graft/tissue interface.

RESULTS

Degradation was more important with Vanguard stent-grafts (off the market) than with AneuRx and Talent stent-grafts, but rupture of nitinol wires and poor surface finish in Talent stent-grafts raise concern about their corrosion resistance and long-term stability. Poor healing was observed around stent-grafts even after several years of implantation, with absence of vascular smooth muscle cells, fibroblasts, and collagen formation. In addition to the well-known foreign body reaction around the graft, numerous polymorphonuclear cells characteristic of the first step of healing were present in tissues around stent-grafts retrieved at surgical conversion. Factors explaining the lack of tissue organization around stent-grafts are discussed.

CONCLUSION

The long-term stability of implants remains a concern and requires more transparency from manufacturers regarding the surface properties of their devices. Lack of neointima formation impairs biological fixation of the implant to the vessel wall, leading to possible endoleaks and migration. New-generation stent-grafts promoting biological fixation should be developed to improve clinical outcomes of this minimally invasive treatment.

Polymethylmethacrylate (PMMA) as an embedding medium preserving tissues and foreign materials encroaching in endovascular devices

Problems of displacement, poor healing, degradation of the polymers and corrosion of the metallic frame in endovascular devices still require in-depth investigations. As the tissues and the foreign materials are in close contact, it is of paramount importance to efficiently investigate the interfaces between them. Inclusion in polymethymethacrylate (PMMA) permits us to obtain thin slides and preserve the capacity to perform the appropriate stainings. An AneuRx prosthesis was harvested in bloc with the surrounding tissues at the autopsy of a patient 25 months post deployment in a 5.7 cm diameter AAA and sectioned in the direction of the blood flow in two halves. A cross-section of the encapsulated distal segment together with the surrounding aneuryshmal sac was embedded in polymethylmethacrylate (PMMA). Further to complete polymerization, slices of the specimen were cut on a precision banding saw under coolant. They were affixed onto methacrylate slides with a UV cured adhesive. Binding and polishing were done on a numeric grinder and slices 25 to 30 microm in thickness were stained with toluidine blue prior to observation in light microscopy. Additional slices were prepared for scanning electron microscopy and X-ray energy dispersive spectrometry for determination of the elemental composition of the Nitinol stent. The aortic wall did not demonstrate complete integrity along with its circumference. Some areas of rupture were noted. The content of the sac was heavily shrunk and was mostly acellular. The walls of the device were very well encapsulated. The PMMA embedding permitted the polyester wall, the Nitinol wire and the collagen to keep in close contact. Scanning electron microscopy involved backscattered electrons and confirmed the corrosion the Nitinol wire at the boundary with living tissues. Based upon the results obtained, we believe that PMMA embedding is the most appropriate method to process endovascular devices for histological and material investigation. Needless to say, that paraffin embedding would have not been feasible for such a big size specimen involving different materials.

Comparison of the Endothelialization of Small Intestinal Submucosa, Dacron, and Expanded Polytetrafluoroethylene Suspended in the Thoracoabdominal Aorta in Sheep

PURPOSE

This study was undertaken to evaluate and compare endothelialization of small intestinal submucosa (SIS), Dacron, and expanded polytetrafluoroethylene (ePTFE) in high-pressure flow without aortic wall contact and to evaluate the suitability of SIS as a vascular graft material.

MATERIALS AND METHODS

In 12 adult sheep, three types of membrane leaflets of similar thickness (approximately 200 mum) were suspended within large square stents without contact with the thoracoabdominal aortic wall: SIS (n = 12), Dacron (n = 12), and ePTFE (n = 12). Each animal received one leaflet of each material. Aortograms were obtained before and after percutaneous implantation and when the animal was killed at 8 weeks (n = 6) or 18 weeks (n = 6). Cell coverage and remodeling of SIS, Dacron, and ePTFE membranes were assessed by gross and histologic microscopic examinations.

RESULTS

Thirty-five successfully implanted leaflets were evaluated. SIS showed progressive remodeling. Thirty-three leaflets exhibited thickening as a result of neointimal formation and endothelialization, most likely from circulating endothelial cells. Dacron exhibited the greatest and most progressing degree of neointimal formation and endothelialization, followed by SIS and then ePTFE. With SIS and ePTFE, neointimal formation decreased with time, but endothelialization was stable. Uneven neointimal formation and endothelialization on the outer surfaces and distal leaflet positions were seen.

CONCLUSIONS

SIS showed progressive remodeling with moderate and regressive neointimal formation and moderate stable endothelialization. Further study of its durability and incorporation into the aortic wall needs to be performed to evaluate its suitability as a cover for aortic endografts.

Effects of flat, parabolic and realistic steady flow inlet profiles on idealised and realistic stent graft fits through Abdominal Aortic Aneurysms (AAA)

Computational fluid dynamics modelling of bifurcated stent grafts positioned across Abdominal Aortic Aneursysms (AAAs) is influenced significantly by the boundary conditions and geometry. To assess these influencing factors, simulations using three different steady inlet profiles and two geometries were run. The steady velocity inlet profiles (flat, parabolic and realistic) were used as input boundary conditions with a constant pressure outlet for each model. The geometry of an out-of-plane realistic stent graft model, fitted to the internal geometry of an AAA (a realistic geometry generated from CT scans) was compared to an idealised geometry of an in-plane model. It was found that the realistic boundary condition when applied to the idealised model had a 5% difference in outlet flow rates when compared to flat and parabolic inlet profiles, while the realistic models had an 11-16% difference. The blood flowed in a parallel streamlined fashion for all the idealised models with slight recirculation for the realistic boundary condition. All realistic models had significant recirculation and flowed in a left-handed helix motion in the proximal end and left leg and in a right-handed helix motion in the right leg. The drag force was unidirectional in the idealised models, while it was found to act in all three directions for the realistic models with a 26% increase over the idealised models. It was concluded that geometry has the greatest influence on the outlet flow rates, flow patterns and drag forces. Input boundary condition cause variations in the skewness and recirculation of the flow throughout the models.

Initial and Midterm Results for Repair of Aortic Diseases With Handmade Stent Grafts

BACKGROUND

The purpose of this study was to determine the initial and midterm results for repair of thoracic and abdominal aortic diseases using handmade stent-grafts (SGs).

METHODS AND RESULTS

Between 1999 and 2004, 41 consecutive patients (31 patients with thoracic and 10 patients with abdominal aortic disease) underwent endovascular stent-graft repair using handmade SGs. The follow-up averaged 24.8+/-17.6 months. The technical and initial clinical success rates were 82.9% (34/41) and 80.5% (33/41), respectively. Primary type I or III endoleaks occurred in 12.2% (5/41) of the patients. The hospital mortality rate was 4.9% (2/41). Persistent type I or III endoleaks occurred in 9.8% (4/41) and SG migrations occurred in 4.9% (2/41) of the patients. Open surgical conversion was undertaken in 12.2% (5/41) of the patients because of an endoleak and/or migration. The mean change observed in the aneurysm diameter was -6.2+/-10.5 mm, and shrinkage in the diameter occurred in 51.4% (18/35) of the cases. There was 1 patient death because of aneurysm rupture. Neither stent fracture nor graft hole was observed. The overall clinical success rate during follow-up was 78.0% (32/41).

CONCLUSION

The initial and midterm results obtained after repair of the aortic diseases using handmade SGs were considered to be satisfactory. More surgical experience and long-term patient follow-up are both required to further reassess the effect of this treatment.

Effect of radioactivity on stent-graft incorporation after endovascular treatment of aneurysms: An animal study

Poor stent-graft (SG) incorporation into the vessel wall, following endovascular repair of abdominal aortic aneurysms (EVAR), can lead to endoleaks and SG migration. Low-dose radiation can prevent aneurysm recurrence after coil embolization, and has been associated with a "paradoxical" increase in neointima formation after stenting in a few studies. It was hypothesized that in situ beta radiation emitted from SG could improve its incorporation by preventing the persistence of circulating channels between the implant and the vessel wall and increasing neointima formation around the SG. Phosphorus 32 ((32)P, 200 or 400 kBq per SG (n = 6 each)) was ion implanted on the external surface of balloon-expandable SGs. Twelve radioactive and six non-radioactive SGs were deployed in iliac arteries of nine Mongrel dogs. Neointima formation inside the graft and the persistence of circulating flow through an artificial groove created during the endovascular procedure were assessed by follow-up imaging and by blinded, computerized histomorphometric analysis after animal sacrifice at 3 months. Occlusion occurred in four radioactive SGs. A lesser number of patent grooves was observed along high-activity SGs than along control SGs (1/3 versus 4/4). No difference in neointima formation was observed in radioactive and non-radioactive SGs. Alteration of external graft surface was observed after ion implantation. Ion implantation of (32)P on SGs does not seem to be a viable strategy to improve incorporation and prevent type-I endoleak after EVAR.

Fenestrated and Branched Endografts: Assessment of Proximal Aortic Neck Fixation

PURPOSE

To investigate proximal fixation characteristics of different aortic endograft designs: a suprarenally placed fenestrated endograft, a modular branched endograft, an infrarenal endograft with suprarenal bare stent fixation, and the gold standard, a conventional hand-sewn anastomosis.

METHODS

Ten human cadaveric aortas were obtained at autopsy and transected 20 mm below the renal arteries to mimic an infrarenal aneurysm neck. In random order, the infrarenal, fenestrated, and branched endografts were deployed into the aorta. Using a hydraulic material testing machine, longitudinal load was applied to the distal end of each endograft until migration occurred, thus defining the displacement force (DF). Subsequently, a hand-sewn infrarenal anastomosis was tested in a similar manner.

RESULTS

The median DF was 4.67 N (3.82-6.37) for the infrarenal endograft, 9.17 N (8.03- 10.81) for the fenestrated endograft, and 16.95 N (14.78-19.67) for the branched endograft. The differences in DF between the infrarenal and fenestrated endografts and between the fenestrated and branched designs were statistically significant (both p=0.005). The median force to dislodge the graft from the conventional anastomosis was 89.16 N (71.24-105.23).

CONCLUSIONS

Suprarenally placed endografts, especially with additional branch grafts, provide improved proximal fixation compared to an infrarenal endograft with suprarenal bare stent fixation. However, none of the tested endografts approached the optimal, time-proven fixation, the hand-sewn anastomosis.

Absence of proximal neck dilatation and graft migration after endovascular aneurysm repair with balloon-expandable stent-based endografts

OBJECTIVE

Proximal neck dilatation (PND) and/or endograft migration with the subsequent development of type I endoleak is a significant cause of late endograft failure after endovascular abdominal aortic aneurysm repair (EVAR). Although there are numerous reports examining PND in patients receiving endografts that use self-expanding stents (SES) for proximal fixation, there are no such reports for patients treated with endografts that use balloon-expanding stents (BES). The purpose of this study was to investigate PND and endograft migration after EVAR with BES endografts.

METHODS

We retrospectively reviewed all charts and all serial computed tomographic scans available for patients who underwent EVAR with a BES endograft (surgeon-made, aortounifemoral polytetrafluoroethylene graft with a proximal Palmaz stent) between August 1997 and October 2002. Only patients with longer than a 12-month follow-up were analyzed. Neck diameter was measured at the level of the lowest renal artery and at 5 mm below it. PND was defined as neck enlargement of 2.5 mm or more. To assess endograft migration, the distance between the superior mesenteric artery and the cranial end of the BES was measured. Stent migration was defined as a change of 5 mm or more.

RESULTS

A total of 77 patients received this device during the study period. The technical success rate was 99%. The 1-, 3-, and 5-year survival was 66%, 48%, and 29.5%, respectively. Complete serial computed tomographic scans were available in 41 of the 48 patients who survived 12 months or longer after the operation. The mean follow-up period for these patients was 31 months (range, 12-66 months). The maximum aneurysm diameter was either unchanged or decreased in 35 patients (85%). The immediate postoperative proximal neck diameter was 19 to 29 mm (median, 24 mm). This was unchanged at the latest follow-up. None of the patients had significant PND. The cranial end of the BES was located in the area between 14 mm proximal and 36 mm distal to the superior mesenteric artery (median, 6 mm). None of the patients developed significant endograft migration.

CONCLUSIONS

Neither PND nor endograft migration was observed with the BES endograft. The nature of the SES may be responsible for the observed neck dilatation and device migration after EVAR with SES endografts. This study suggests that BES may be a better fixation method for EVAR.

Endovascular treatment of abdominal aortic aneurysms

BACKGROUND

Endovascular treatment of abdominal aortic aneurysms is a rapidly evolving technique that has gained broad acceptance in the treatment of patients with abdominal aortic aneurysms.

METHODS

A review of the English literature was done to determine the short- and long-term outcomes of endovascular repair of abdominal aortic aneurysms. Reports of complications such as endoleak, graft migration, graft limb occlusion, aneurysm rupture, and aneurysm enlargement were evaluated.

RESULTS

Short-term results of endovascular repair of abdominal aortic aneurysms are excellent. The necessity for open conversions is less than 5%. The cumulative risk of aneurysm rupture is approximately 1% per year. The coverall incidence of graft limb occlusion was 2.8% in the follow-up period. The cumulative risk for a secondary procedure was 12% at 1 year, 24% at 2 years, and 35% at 3 years. Moderate and severe neck angulation was associated with an increased incidence of adverse events in the follow-up period. Endografts have the potential to become infected and develop aortoduodenal fistula. The treatment of ruptured aneurysms with endovascular grafts has been successful and a technique that is increasingly used.

CONCLUSION

Endovascular treatment of abdominal aortic aneurysm is an effective technique with excellent short-term results. The long-term results remain to be determined. Ongoing surveillance is necessary to avoid late complications of aneurysm rupture.

Endovascular Aortic Aneurysm Repair with Stent-Grafts: Experimental Models Can Reproduce Endoleaks

PURPOSE

To develop canine aneurysm models that can reproduce type II endoleaks after endovascular aneurysm repair (EVAR) with stent-grafts.

MATERIALS AND METHODS

A fusiform infrarenal abdominal aortic aneurysm model (AAA) was surgically created with a jugular vein patch, while preserving collateral vessels (n = 3). To allow comparative studies within the same animal, a bilateral iliac aneurysm model was also constructed with venous patches and surgical re-implantation of the sacroiliac trunk (n = 3). Stent-grafts were implanted by femoral approach at least 2 months later in both aortic and iliac models. Follow-up imaging was performed by Doppler ultrasound (US) and angiography until animals were killed 3 months after EVAR.

RESULTS

Angiography revealed immediate type II leaks in all cases. Leaks were still present at autopsy 3 months after EVAR in all cases, and were revealed at pre-death angiography in all but one case. At autopsy, leaks were characterized by the presence of large endothelialized channels that formed within the thrombus between the stent-graft and the aneurysmal wall.

CONCLUSION

As shown in this pilot study, persistent type II leaks after EVAR can be reproduced in aortic and iliac animal models. The iliac model can be created bilaterally in the same animal, thus allowing for comparative evaluation of different therapies. These models could be used to better understand the mechanisms of endoleak, and to assess future developments aimed to improve the outcomes after EVAR.

Ingrowth of aorta wall into stent grafts impregnated with basic fibroblast growth factor: a porcine in vivo study of blood vessel prosthesis healing

OBJECTIVE

Endovascular aneurysm repair is an alternative treatment of abdominal aortic aneurysm. The procedure is less invasive, and morbidity and most probably mortality are reduced. However, some problems, such as endoleakage, are yet to be resolved. Endoleakage can occur after graft migration, as a result of insufficient fixation of the stent graft. One cause is deficient healing between the aortic neck and the stent graft. We hypothesize that better healing, achieved by induction of vascular cell ingrowth into the graft material, results in better graft fixation. Previously we demonstrated ingrowth of neointima into the graft material if the stent graft is impregnated with a coat of basic fibroblast growth factor (bFGF), heparin, and collagen. In this study we evaluated healing with bFGF-heparin-collagen-coated stent grafts in vivo.

METHODS

In 4 pigs, 32 endovascular stent grafts, manufactured from standard Dacron and Gianturco Z-stents, were placed in the aorta. The stent grafts were impregnated with either bFGF-heparin containing collagen (n=16) or control collagen (n=16). After 4 and 8 weeks animals were killed, and ingrowth and healing of the stent grafts were macroscopically and electron microscopically evaluated.

RESULTS

After 8 weeks all bFGF-impregnated stent grafts demonstrated ingrowth of tissue and healing between the graft and the aorta, whereas the control nonimpregnated stent grafts showed no ingrowth. Microscopic evaluation demonstrated alpha-smooth muscle actin-positive cells, most probably smooth muscle cells or myofibroblasts, growing from the vascular wall through the graft material.

CONCLUSION

A Dacron prosthesis impregnated with collagen, heparin, and bFGF induced graft healing in an in vivo pig model, in contrast to nonimpregnated stent grafts. This in vivo study confirms our previous findings in vitro. These results indicate that healing between Dacron and the aorta can be achieved, and suggest that type I endoleakage may be resolved by inducing healing between the aortic wall and the prosthesis with graft material containing growth factor.

Does large oversizing of self-expandable endoprostheses compensate for aortic growth?

PURPOSE

There is experimental evidence that self-expandable endoprostheses are appropriate for compensation of aortic growth. A potential future application includes their use in the treatment of aortic coarctation. Yet their behavior is poorly investigated. The present study evaluates the performance of largely oversized self-expandable endoprostheses (EPs) in the growing porcine aorta and the biologic response toward them.

METHODS

Twenty oversized EPs (Talent, TalentLoPro, Stenway, and Wallstent; nominal lumen area 314 mm(2) [diameter 20 mm]) were implanted in the descending thoracic aorta of juvenile pigs. Four nonoversized EPs (TalentLoPro; nominal lumen area 154 mm(2) [diameter 14 mm]) served as controls. Cross sections of aorta and EPs were measured by intravascular ultrasound (IVUS) at implantation and 3 months follow-up. The histologic response was assessed by microscopy.

RESULTS

At implantation, the EPs were 99 +/- 41% oversized relative to the aortic area [48 +/- 22% in diameter]. At follow-up, the area of the aortic lumen increased 60 +/- 50%, P <.001 [29 +/- 23% in diameter]. The Stenway EPs demonstrated the largest prosthetic lumen with 80 +/- 10% of their nominal area (P =.001). However, the prosthetic lumen area was reduced by intimal hyperplasia in all devices. The largest perfused lumen was obtained by the TalentLoPro EPs due to their progressive expansion. Nonoversized EPs resulted in a significantly smaller perfused lumen (P =.012). The inflammatory response to polyester was moderate, whereas polyurethane evoked an extensive body-foreign reaction.

CONCLUSION

Large oversizing of self-expandable EPs is essential in order to maintain a large perfused lumen during aortic growth, thereby minimizing the adverse effect of intimal hyperplasia. This was best achieved by the TalentLoPro EPs.

Delayed open conversion following endovascular aortoiliac aneurysm repair: partial (or complete) endograft preservation as a useful adjunct

OBJECTIVES

The purpose of this study was to review our experience with delayed open conversion (>30 days) following endovascular aortoiliac aneurysm repair (EVAR) and to introduce the concept and advantages of endograft retention in this setting.

METHODS

From January 1992 to January 2003, a total of 386 EVARs using a variety of endografts were successfully deployed. Eleven (2.8%) patients required delayed conversion to open repair at an average of 30 months (range, 10-64). Data from all patients undergoing both EVAR and open conversion were prospectively collected.

RESULTS

EVARs were performed using grafts made by Talent (4), Vanguard (2,) AneuRx (1), and Surgeon (4). Conversion to open repair (9 transabdominal, 1 retroperitoneal, 1 transabdominal plus thoracotomy) was performed for aneurysm rupture in 7 patients (4 type 1 endoleak, 2 type 2 endoleak, 1 aortoenteric fistula) and aneurysm enlargement in 4 patients (1 type 1 endoleak, 1 type 2 endoleak, 1 type 3 endoleak, 1 endotension). Patients with aneurysm rupture were treated on an emergent basis. Complete removal of the endograft with supraceliac cross-clamping was performed in two cases. One patient (rupture) did not survive the operation, and one patient (aortoenteric fistula) died 2 weeks postoperatively. In the remaining nine cases, the endograft was either completely (1) or partially (6) removed, or left in situ (2). Supraceliac balloon control (2), supraceliac clamping (1), suprarenal clamping (1), or infrarenal clamping (5) was used in these cases. All nine of these patients survived the operation. In one procedure in which the endograft was left intact (endotension), repair was accomplished by exposing the endograft and by placing a standard tube graft over it as a sleeve. In the second procedure in which the graft was left in situ (rupture), the graft was well incorporated, and bleeding lumbar arteries were oversewn and the sac was closed tightly over the endograft. In the remaining 7 cases, the endograft was transected and the proximal portion only (6) or the proximal and distal portions (1) were excised. All surviving patients continue to do well and remain without complications associated with the endograft remnant at a mean follow-up of 22 months (range, 3-56) from the time of open conversion and 46 months (range, 10-73) from the time of original EVAR.

CONCLUSIONS

Open repair in the setting of a long-standing endograft offers several unique technical challenges but can be successfully accomplished in most patients. Preservation of all or part of the endograft is possible in many patients. This technique simplifies the operative approach and is preferred over complete endograft removal if possible.

Factors Affecting the Displacement Force Exerted on a Stent Graft after AAA Repair—An In vitro Study

OBJECTIVES

To investigate the distraction forces affecting grafts used to treat abdominal aortic aneurysms in an in vitro model.

METHOD

Using a standard cardiac pump and a rigid plastic circulation system, distraction forces were measured with a gramometer attached to a PTFE graft while the pressure inside a rigid aortic sac was varied.

RESULTS

If the pressure in the 'aneurysm sac' is maintained at the same level as the systemic pressure, the displacement force is zero. The displacement force is affected adversely by the level of systemic pressure, as this rises the displacement forces rise in an almost linear fashion.

CONCLUSIONS

These observations may have important consequences for stent graft design and use in vivo pressurisation of a sealed sac may therefore not necessarily be an adverse event. Systemic hypertension is obviously important and its control may be necessary to prevent graft migration.

Factors and forces influencing stent-graft migration after endovascular aortic aneurysm repair

PURPOSE

To assess and validate the clinical features predisposing to stent-graft migration and to calculate the distal displacement forces exerted at the proximal fixation site following endovascular aortic aneurysm repair (EVAR).

METHODS

Demographic, anatomical, and graft-related features from 2862 patients were analyzed in a regression model to identify variables associated with stent-graft migration, which was defined as device movement >5 mm or considered significant by the investigator. Using the principles of continuity and momentum, a mathematical model of blood flow was created. The pulse pressure, proximal aortic and distal iliac diameters, and the degree of iliac angulation were varied in the calculations, and the distal displacement force exerted at the proximal fixation site was calculated.

RESULTS

Ninety-nine patients developed stent-graft migration, which was clinically relevant in 85 (3.0%). Hypertension (p=0.015), smoking (p=0.009), maximal aortic diameter (p=0.004), and distal transverse aortic diameter (p=0.03) correlated with migration in the univariate analysis, but iliac angulation did not quite achieve significance (p=0.06). On multivariate analysis, current smoking, hypertension, distal transverse aortic diameter, maximum common iliac diameter, and increasing proximal graft size were significantly associated with stent-graft migration. The mathematical model calculated the distal displacement force exerted on the proximal fixation site of the stent-graft and validated the clinical findings. The ratio of graft-diameter change from proximal aorta to distal iliac influenced the greatest increase in the displacement force.

CONCLUSIONS

The mathematical model validated hypertension, aneurysm morphology, and endograft size as clinical factors significantly associated with stent-graft migration. These findings may have important implications for the choice and design of future stent-grafts.

Aneurysm neck diameter after endovascular repair of abdominal aortic aneurysms

PURPOSE

To determine aneurysm neck diameter change after endovascular repair (EVR) of abdominal aortic aneurysm (AAA) and its relationship to stent-graft diameter.

MATERIALS AND METHODS

The cases of 73 patients with AAAs who underwent EVR were reviewed retrospectively: 68 had preoperative imaging available. Neck diameter was reviewed by a single observer (M.F.B.) on preoperative, immediate postoperative, annual, and most recent contrast-enhanced computed tomographic scans. Baseline and follow-up neck diameters were compared with the manufacturers' values for unconstrained stent-graft diameters.

RESULTS

Intraobserver error was 2 mm. Aneurysm neck diameter increased from 21.8 mm (range, 17-28 mm) at baseline to 22.8 mm (range, 19-30 mm) postoperatively and 25.8 mm (range, 19-31 mm; P <.001) at a mean follow-up of 25.5 months (range, 6.2-60.8 mo). Neck diameter increase was more than 2 mm in 24 patients (33%). Mean change in the first, second, third, and fourth years was +1.63 mm, +0.52 mm, +0.25 mm, and +0.33 mm, respectively. Baseline mean stent-graft oversizing was 2.9 mm (13.7%; range, -1 to +8 mm), which decreased to 0.7 mm (range, -4 to +6 mm) at latest follow-up. Neck diameter exceeded stent-graft diameter (mean, 1.8 mm; range, 1-4 mm) in 21 cases (28%) and by more than 2 mm in five cases (6.8%). When neck diameter change was correlated with change in sac diameter, it was found to be insignificant (P =.24); however, it was significantly correlated with baseline oversizing (P =.01).

CONCLUSIONS

After EVR, the aneurysm neck dilates, mostly in the first 2 years, by greater than 2 mm in one third of patients. This is possibly related to the presence of the endograft. The associated reduction of stent-graft oversizing warrants continued vigilance for proximal endoleak.

Biologic fixation of polyester- versus polyurethane-covered stents in a porcine model

PURPOSE

Migration of endoprostheses remains a concern in endovascular aneurysm treatment. Biologic fixation is supposed to enhance anchorage, but the diseased atherosclerotic aorta in humans has demonstrated a limited capacity to incorporate an endoprosthesis by cellular proliferation. The biologic response of two different types of endoprostheses was evaluated in the porcine aorta.

MATERIALS AND METHODS

Two types of endoprostheses--four polyurethane-covered (PUC) stents with a macroporous polyurethane covering and four polyester-covered (PEC) stents with a woven polyester covering--were implanted in eight infrarenal porcine aortas for 6 weeks. Electron microscopy and qualitative and quantitative microscopy were performed on serial cross sections.

RESULTS

The PUC stents demonstrated an increase in diameter (from 8 mm +/- 1 to 10 mm +/- 1, 12.5%; P = .009), whereas the PEC stents persisted in their original dimensions (8 mm +/- 1, 0%). PUC and PEC stents were covered by continuous thrombus-free neointima (269 microm +/- 51 vs 575 microm +/- 113, respectively; P < .01). The PUC stents demonstrated firm attachment to the aorta as a consequence of a granulation tissue with ingrowth into the pores of the polyurethane covering. The PEC stents remained in loose contact with the aorta in the absence of tissue ingrowth.

CONCLUSIONS

Enhanced biologic fixation was achieved by extensive granulation tissue invading the pores of PUC endoprostheses. This finding can modify the design of future devices.