Understanding the nonfouling mechanism of surfaces through molecular simulations of sugar-based self-assembled monolayers

Fighting against biofilm: The antifouling and antimicrobial material

Biofilms are groups of microorganisms protected by self-secreted extracellular substances. Biofilm formation on the surface of biomaterial or engineering materials becomes a severe challenge. It has caused significant health, environmental, and societal concerns. It is believed that biofilms lead to life-threatening infection, medical implant failure, foodborne disease, and marine biofouling. To address these issues, tremendous effort has been made to inhibit biofilm formation on materials. Biofilms are extremely difficult to treat once formed, so designing material and coating bearing functional groups that are capable of resisting biofilm formation has attracted increasing attention for the last two decades. Many types of antibiofilm strategies have been designed to target different stages of biofilm formation. Development of the antibiofilm material can be classified into antifouling material, antimicrobial material, fouling release material, and integrated antifouling/antimicrobial material. This review summarizes relevant research utilizing these four approaches and comments on their antibiofilm properties. The feature of each method was compared to reveal the research trend. Antibiofilm strategies in fundamental research and industrial applications were summarized.

Versatile, Oxygen-Insensitive Surface-Initiated Anionic Polymerization to Prepare Functional Polymer Brushes in Aqueous Solutions

Surface-initiated polymerization is an attractive approach to achieve desired interfacial compositions and properties on a wide range of substrates and surfaces. Due to mild reaction conditions, multiple surface-initiated polymerization methods, such as atom-transfer radical polymerization (ATRP), reversible addition-fragmentation chain-transfer polymerization, and so forth, have been developed and studied in academia and industry. However, the current methods require the combination of metal catalysts, special initiators, and oxygen removal. Herein, we developed a surface-initiated carbanion-mediated anionic polymerization (SI-CMAP), which can be conducted in aqueous solutions in the presence of oxygen without the need for metal catalysts. Zwitterionic 2-(N-3-sulfopropyl-N,N-dimethyl ammonium)ethyl methacrylate (SBMA) was selected as a model monomer to develop and demonstrate this strategy. The vinyl sulfone (VS) groups displayed on substrate surfaces reacted with N-methylimidazole (NMIM), which was used as the in situ initiator. The polymerization mechanism was extensively studied from many aspects at room temperature, including the changes in reaction conditions, factors affecting the polymerization extent, and substrate surfaces. We also demonstrated the compatibility of this method with a broad spectrum of monomers ranging from SBMA to other acrylates and acrylamides by using glycine betaine as a reaction additive. This method was also evaluated for the preparation of polymer-coated nanoparticles. For polymer-coated silica nanoparticles, their hydrodynamic diameter, copper contamination, and effects of salt and protein concentrations were compared with SI-ATRP in parallel. SI-CMAP in aqueous solutions in air and the absence of metal catalysts make this method sustainable and cost-effective. We believe that SI-CMAP can be readily adapted to the industrial surface coating and large-scale nanoparticle preparation under mild conditions.

Tuning Water Slip Behavior in Nanochannels Using Self-Assembled Monolayers

Water slip at solid surfaces is important for a wide range of micro-/nanofluidic applications. While it is known that water slip behavior depends on surface functionalization, how it impacts the molecular level dynamics and mass transport at the interface is still not thoroughly understood. In this paper, we use nonequilibrium molecular dynamics simulations to investigate the slip behavior of water confined between gold surfaces functionalized by self-assembled monolayer (SAM) molecules with different polar functional groups. We observe a positive-to-negative slip transition from hydrophobic to hydrophilic SAM functionalizations, which is found to be related to the stronger interfacial interaction between water molecules and more hydrophilic SAM molecules. The stronger interaction increases the surface friction and local viscosity, making water slip more difficult. More hydrophilic functionalization also slows down the interfacial water relaxation and leads to more pronounced water trapping inside the SAM layer, both of which impede water slip. The results from this work will provide useful insights into the understanding of the water slip at functionalized surfaces and design guidelines for various applications.

Dynamic surface antifouling: mechanism and systems

Marine biofouling is a global problem today. High efficiency and eco-friendly antifouling systems are in pressing need. In recent years, we have proposed the concept of dynamic surface antifouling (DSA). That is, a continuously changing surface can effectively prevent marine fouling organisms from landing and adhesion. Based on this strategy, we developed coatings with dynamic surfaces by using degradable polymers including polyester-polyurethane, modified polyester and poly(ester-co-acrylate). They exhibit tunable renewability, and excellent antifouling and mechanical performance. Moreover, the polymers can serve as carrier and controlled release systems of antifoulants so that they have long service life. This paper reviews the progress and trends in marine anti-biofouling, and presents the mechanism and systems of DSA.

Examining Nanoparticle Adsorption on Electrostatically "Patchy" Glycopolymer Brushes Using Real-Time ζ-Potential Measurements

Biomaterial surfaces can possess chemical, topographical, or electrostatic heterogeneity, which can profoundly influence their performance. By developing experimental models that reliably simulate this nanoscale heterogeneity, we can predict how heterogeneous surfaces are transformed by their interactions with the dynamic physiological environment. In this work, we present a model surface where well-defined glycopolymer brushes are interspersed with positively charged binding sites, giving rise to an interface presenting a mixture of repulsive and adhesive cues to an approaching virus particle. We show that the density of the affinity sites relative to the glycopolymer brushes can be tuned precisely by modifying the chemical vapor deposition (CVD) copolymerization conditions. Further, we examined the effects of binding site density and glycopolymer brush architecture on the adsorption kinetics of virus-like nanoparticles through a novel approach employing time-resolved ζ-potential measurements. Most materials have charge-bearing, dynamic surfaces that are sensitive to electrostatic effects. Hence, adsorption-triggered changes in ζ-potential measurements can be captured in real time to monitor interfacial events. Real-time ζ-potential measurements present an interesting platform to probe the structure and function of chemically and electrostatically heterogeneous polymer interfaces. To validate this electrokinetic method, we examined the effect of neutravidin concentration on its rate of binding to biotinylated surfaces using ζ-potential and compared our results with QCM studies. By applying electrokinetic methods to examine the roles of glycopolymer brush architecture and surface charge of these tunable glycopolymer coatings, we can enhance our understanding of the interactions of viruses with heterogeneous biomaterial interfaces.

Molecular dynamics study on mechanism of preformed particle gel transporting through nanopores: surface hydration

Hydration layers induced by silanol groups at silica nanopore surface (a) which served as a physical and energy barrier that keeps PPG away from the pore surface (b). This largely reduced the resistance that PPG has to overcome during transport.

A new combinatorial method for synthesizing, screening, and discovering antifouling surface chemistries

A set of diverse monomers were synthesized using combinatorial chemistry and tested using our unique high-throughput screening platform. The versatility of our platform is exemplified by possible applications in reducing biological fouling on ship hulls, filtration membranes, and surgical instruments, to name a few. To demonstrate its efficacy, the novel monomers were graft-polymerized onto light sensitive poly(ether sulfone) (PES) membranes via atmospheric-pressure plasma polymerization. A diverse library was synthesized by reacting a common vinyl ester linker with a library of maleimides containing various different functional groups. This allowed us to produce a library of many different surfaces and graft them all using the same linker chemistry. The modified surfaces were then tested and screened for the best antiprotein adsorption (nonfouling) properties. Membranes, functionalized with carboxylic acid, zwitterionic, and ester groups, had the lowest protein adhesion compared with that of an unmodified control PES membrane after a static fouling test. After dynamic fouling, these same functionalities as well as a hydroxyl group exhibited the highest permeability. These monomers performed better than our best previously synthesized amide monomers as well as our best poly(ethylene glycol) monomers, which are known to have very high protein resistance. Hansen solubility parameters qualitatively predicted which monomers performed best, indicating favorable interactions with water molecules.

Rheological behavior of hydrophobically modified polysulfobetaine methacrylate aqueous solution

Polysulfobetaine methacrylate (PSBMA) that was hydrophobically modified with methacrylic acid 2,3-epoxypropyl ester (GMA) was synthesized via micellar copolymerization method. Viscosity of the hydrophobically modified PSBMA solution was sensitive to added salt concentration.

Mesoscopic coarse-grained simulations of lysozyme adsorption

Coarse-grained simulations are adopted to study the adsorption behavior of lysozyme on different (hydrophobic, neutral hydrophilic, zwitterionic, negatively charged, and positively charged) surfaces at the mesoscopic microsecond time scale (1.2 μs). Simulation results indicate the following: (i) the conformation change of lysozyme on the hydrophobic surface is bigger than any other studied surfaces; (ii) the active sites of lysozyme are faced to the hydrophobic surface with a "top end-on" orientation, while they are exposed to the liquid phase on the hydrophilic surface with a "back-on" orientation; (iii) the neutral hydrophilic surface can induce the adsorption of lysozyme, while the nonspecific protein adsorption can be resisted by the zwitterionic surface; (iv) when the solution ionic strength is low, lysozyme can anchor on the negatively charged surface easily but cannot adsorb on the positively charged surface; (v) when the solution ionic strength is high, the positively charged lysozyme can also adsorb on the like-charged surface; (vi) the major positive potential center of lysozyme, especially the residue ARG128, plays a vital role in leading the adsorption of lysozyme on charged surfaces; (vii) when the ionic strength is high, a counterion layer is formed above the positively charged surface, which is the key factor why lysozyme can adsorb on a like-charged surface. The coarse-grained method based on the MARTINI force field for proteins and the BMW water model could provide an efficient way to understand protein interfacial adsorption behavior at a greater length scale and time scale.

Enantiopure chiral poly(glycerol methacrylate) self-assembled monolayers knock down protein adsorption and cell adhesion

Chirality plays a fundamental role not only in biological systems, but also in synthetic materials intended for bio-applications. Self-assembled monolayers (SAMs) are prepared on gold surfaces through a "grafting to" method from racemic or enantiopure chiral poly(glycerol methacrylate)s (PGMA(rac), PGMA(R), and PGMA(S)), having a thiol endgroup. Such SAMs constitute a chemically and structurally well-defined model substrate for studying protein adsorption and cell adhesion as a function of the polymer chirality. Surface plasmon resonance measurements reveal that PGMA SAMs greatly reduce the adsorption of bovine serum albumin (BSA) compared to bare gold surfaces. Interestingly, enantiopure SAMs based on PGMA(R) or PGMA(S) show a significantly larger reduction in BSA adsorption than PGMA(rac)-covered surfaces. Studies with the monocytic cell line THP-1 show a similar relationship between enantiopurity of PGMA SAMs and the extent of cell adhesion. Ellipsometry and Raman spectroscopy measurements indicate that SAMs formed by PGMA(rac) have a higher grafting density compared to SAMs of PGMA(R) and PGMA(S). This seems to be due to the ability of PGMA(rac) to form more intermolecular hydrogen bonds among polymer chains compared to the enantiopure PGMAs. Circular dichroism spectroscopy provide evidence that enantiopure polymers adopt a chiral ordered conformation, most likely helical, in aqueous solutions. It is concluded that a higher water content of SAMs formed by enantiopure PGMA(S) and PGMA(R) SAMs arises from the macromolecular chiral conformation adopted by their enantiopure PGMA chains, and it is the decisive reason for the reduced BSA adsorption and cell adhesion as compared to PGMA(rac) SAMs.

Antifouling glycocalyx-mimetic peptoids

The glycocalyx of the cell is composed of highly hydrated saccharidic groups conjugated to protein and lipid cores. Although components of the glycocalyx are important in cell-cell interactions and other specific biological recognition events, a fundamental role of the glycocalyx is the inhibition of nonspecific interactions at the cell surface. Inspired by glycoproteins present in the glycocalyx, we describe a new class of synthetic antifouling polymer composed of saccharide containing N-substituted polypeptide (glycopeptoid). Grafting of glycopeptoids to a solid surface resulted in a biomimetic shielding layer that dramatically reduced nonspecific protein, fibroblast, and bacterial cell attachment. All-atom molecular dynamics simulation of grafted glycopeptoids revealed an aqueous interface enriched in highly hydrated saccharide residues. In comparison to saccharide-free peptoids, the interfacial saccharide residues of glycopeptoids formed a higher number of hydrogen bonds with water molecules. Moreover, these hydrogen bonds displayed a longer persistence time, which we believe contributed to fouling resistance by impeding interactions with biomolecules. Our findings suggest that the fouling resistance of glycopeptoids can be explained by the presence of both a 'water barrier' effect associated with the hydrated saccharide residues as well as steric hindrance from the polymer backbone.

Combinatorial synthesis with high throughput discovery of protein-resistant membrane surfaces

Using combinatorial methods, we synthesized a series of new vinyl amide monomers and graft-polymerized them to light-sensitive poly(ether sulfone) (PES) porous films for protein resistance. To increase the discovery rate and statistical confidence, we developed high throughput surface modification methods (HTP) that allow synthesis, screening and selection of desirable monomers from a large library in a relatively short time (days). A series of amide monomers were synthesized by amidation of methacryloyl chloride with amines and grafted onto commercial poly(ether sulfone) (PES) membranes using irradiation from atmospheric pressure plasma (APP). The modified PES membrane surfaces were then tested and screened for static protein adhesion using HTP. Hydroxyl amide monomers N-(3-hydroxypropyl)methacrylamide (A3), N-(4-hydroxybutyl)methacrylamide (A4), and N-(4-hydroxybutyl)methacrylamide (A6), ethylene glycol (EG) monomer N-(3-methoxypropyl)methacrylamide (A7), and N-(2-(dimethylamino)ethyl)-N-methylmethacrylamide (A8), and N-(2-(diethylamino)ethyl)-N-methylmethacrylamide (A9) all terminated with tertiary amines and were shown to have protein resistance. The PES membranes modified with these monomers exhibited both low protein adhesion (i.e. membrane plugging or fouling) and high flux. Their performance is comparable with previously identified best performing PEG and zwitterionic monomers, i.e. the so-called gold-standard for protein resistance. Combining a Hansen solubility parameter (HSP) analysis of the amide monomers and the HTP filtration results, we conclude that monomer solubility in water correlates with protein-resistant surfaces, presumably through its effects on surface-water interactions.

Discovery of low mucus adhesion surfaces

Mucus secretion from the body is ubiquitous, and finding materials that resist mucus adhesion is a major technological challenge. Here, using a high throughput platform with photo-induced graft polymerization, we first rapidly synthesized, screened and tested a library of 55 different surfaces from six functional monomer classes to discover porcine intestinal low mucus adhesion surfaces using a 1h static mucus adsorption protocol. From this preliminary screen, two chemistries, a zwitterionic ([2-(acryloyloxy)ethyl] trimethylammonium chloride) and a multiple hydroxyl (N-[tris(hydroxymethyl)methyl]acrylamide) surface, exhibited significantly low mucus adhesion from a Langmuir-type isotherm when exposed to increasing concentrations of mucus for 24 h. Apolar or hydrophobic interactions were likely the dominant attractive forces during mucus binding since many polar or hydrophilic monomers reduced mucus adhesion. Hansen solubility parameters were used to illustrate the importance of monomer polarity and hydrogen bonding in reducing mucus adsorption. For a series of polyethylene glycol (PEG) monomers with changing molecular weight from 144 g mol⁻¹ to 1100 g mol⁻¹, we observed an excellent linear correlation (R²=0.998) between relative amount adsorbed and the distance from a water point in a specialized Hansen solubility parameter plot, emphasizing the role of surface-water interactions for PEG modified surfaces.

Surface control of blastospore attachment and ligand-mediated hyphae adhesion of Candida albicans

Controlling the adhesion of Candida albicans on surfaces by the selected ligand deconvolutes effects from multiple adhesins and nonspecific interactions.

Design and characterization of sulfobetaine-containing terpolymer biomaterials

A methacrylic terpolymer system with non-fouling interfacial properties was synthesized by the random copolymerization of hexyl methacrylate, methyl methacrylate and sulfobetaine methacrylate (a monomer bearing a zwitterionic pendant group). Polymers were synthesized from feeds containing 0-15 mol.% of the zwitterion-containing methacrylate. Proton nuclear magnetic resonance verified the incorporation of sulfobetaine methacrylate into the polymer structure. Water absorption studies illustrate that the hydrophilicity of the material increases with increasing zwitterion concentration. The biological properties of the polymer were probed by fibrinogen adsorption, human umbilical vein endothelial cell adhesion and growth, and platelet adhesion. Strong resistance to protein adsorption and cell and platelet attachment was observed on materials synthesized from 15 mol.% sulfobetaine methacrylate. Results were compared to the non-fouling behavior of a PEGylated terpolymer formulation and it was observed that the poly(ethylene glycol)-containing materials were slightly more effective at resisting human umbilical vein endothelial cell adhesion and growth over a 7 day incubation period, but the zwitterion-containing materials were equally effective at resisting fibrinogen adsorption and platelet adhesion. The zwitterion-containing materials were electrospun into three-dimensional random fiber scaffolds. Materials synthesized from 15 mol.% of the zwitterion-containing monomer retained their non-fouling character after fabrication into scaffolds.

New antifouling silica hydrogel

In this work, a new antifouling silica hydrogel was developed for potential biomedical applications. A zwitterionic polymer, poly(carboxybetaine methacrylate) (pCBMA), was produced via atom-transfer radical polymerization and was appended to the hydrogel network in a two-step acid-base-catalyzed sol-gel process. The pCBMA silica aerogels were obtained by drying the hydrogels under supercritical conditions using CO(2). To understand the effect of pCBMA on the gel structure, pCBMA silica aerogels with different pCBMA contents were characterized using scanning electron microscopy (SEM), nuclear magnetic resonance (NMR) spectroscopy, and the surface area from Brauner-Emmet-Teller (BET) measurements. The antifouling property of pCBMA silica hydrogel to resist protein (fibrinogen) adsorption was measured using enzyme-linked immunosorbent assay (ELISA). SEM images revealed that the particle size and porosity of the silica network decreased at low pCBMA content and increased at above 33 wt % of the polymer. The presence of pCBMA increased the surface area of the material by 91% at a polymer content of 25 wt %. NMR results confirmed that pCBMA was incorporated completely into the silica structure at a polymer content below 20 wt %. A protein adsorption test revealed a reduction in fibrinogen adsorption by 83% at 25 wt % pCBMA content in the hydrogel compared to the fibrinogen adsorption in the unmodified silica hydrogel.

Investigation of the hydration of nonfouling material poly(sulfobetaine methacrylate) by low-field nuclear magnetic resonance

The strong surface hydration layer of nonfouling materials plays a key role in their resistance to nonspecific protein adsorption. Poly(sulfobetaine methacrylate) (polySBMA) is an effective material that can resist nonspecific protein adsorption and cell adhesion. About eight water molecules are tightly bound with one sulfobetaine (SB) unit, and additional water molecules over 8:1 ratio mainly swell the polySBMA matrix, which is obtained through the measurement of T(2) relaxation time by low-field nuclear magnetic resonance (LF-NMR). This result was also supported by the endothermic behavior of water/polySBMA mixtures measured by differential scanning calorimetry (DSC). Furthermore, by comparing both results of polySBMA and poly(ethylene glycol) (PEG), it is found that (1) the hydrated water molecules on the SB unit are more tightly bound than on the ethylene glycol (EG) unit before saturation, and (2) the additional water molecules after forming the hydration layer in polySBMA solutions show higher freedom than those in PEG. These results might illustrate the reason for higher resistance of zwitterionic materials to nonspecific protein adsorptions compared to that of PEGs.

Carbohydrate structure dependent hemocompatibility of biomimetic functional polymer brushes on surfaces

Glycocalyx mimicking glycopolymer brushes presenting mannose, galactose and glucose residues in the pyranose form, similar to those present on cell surfaces, were synthesized on planar substrates (Si wafer, gold chip) and monodispersed polystyrene (PS) particles, and the interaction of blood to these surfaces were studied using various methods with the goal of producing a hemocompatible surface. Surface plasmon resonance (SPR) spectroscopy and gel analyses showed that the total protein adsorption from plasma was greatly reduced, as low as 24.3 ng/cm(2) from undiluted plasma on the glucose carrying brush. The protein adsorption decreased with increasing grafting density of the brushes. It was also found that the protein adsorption varied with the anticoagulant used for blood collection; much higher amount of protein was adsorbed from heparinzied plasma than citrated plasma. Proteomics protein identification analysis revealed that protein adsorption from plasma depended on the type of sugar residue present on the surface as well as the type of anticoagulant. All the three types of glycopolymer brushes showed similar level of platelet activation as that of buffer control irrespective of the nature of carbohydrate residue. However, the number of adhered platelet and their morphology depended on the type of carbohydrate residue present on the brush. On glucose brush, the extent of platelet adhesion and spreading was significantly lowered compared to other brushes. All the glycopolymer brushes were neutral to blood coagulation as indicated by thromboelastography analysis. The glucose brush gave a slightly longer initial coagulation time suggesting that this surface may be more biocompatible. Our data demonstrate that the structure of carbohydrate residue is an important factor in the design of synthetic blood contacting surface based on glycopolymer.

Investigation of the hydration of nonfouling material poly(ethylene glycol) by low-field nuclear magnetic resonance

The strong surface hydration layer of nonfouling materials plays a key role in their resistance to nonspecific protein adsorption. Poly(ethylene glycol) (PEG) is an effective example of materials that can resist nonspecific protein adsorption and cell adhesion. Thus, the strong interaction between water molecules and PEG was investigated through each T(2) component in water/PEG mixtures using multiexponential inversion of T(2) relaxation time measured by the Carr-Purcell-Meiboom-Gill (CPMG) sequence of low-field nuclear magnetic resonance (LF-NMR). Results show that about one water molecule is tightly bound with one ethylene glycol (EG) unit, and additional water molecules over 1:1 ratio mainly swell the PEG matrix and are not tightly bound with PEG. This result was also supported by the endothermic behavior of water/PEG mixtures measured by differential scanning calorimetry (DSC). It is believed that the method developed could be also applied to investigate various interactions between macromolecules and other small molecules without using deuterium samples, which might open a novel route to quantitatively measure guest-host interactions in the future.

Multiphoton reactive surfaces using ruthenium(II) photocleavable cages

Photoreactive surfaces derived from a new photocleavable surface modification agent and with photosensitivity in the Vis and IR region are described. A ruthenium(II) caged aminosilane, [Ru(bpy)(2)(PMe(3))(APTS)](PF(6))(2), was synthesized and attached to silica surfaces. Light irradiation removed the cage and generated surface patterns with reactive amine groups. The photosensitivity of this compound under single (460 nm) and two-photon (900) excitation is demonstrated. Functional patterns with site-selective attachment of other molecular species are described.

Effects of tethering a multistate folding protein to a surface

Protein/surface interactions are important in a variety of fields and devices, yet fundamental understanding of the relevant phenomena remains fragmented due to resolution limitations of experimental techniques. Molecular simulation has provided useful answers, but such studies have focused on proteins that fold through a two-state process. This study uses simulation to show how surfaces can affect proteins which fold through a multistate process by investigating the folding mechanism of lysozyme (PDB ID: 7LZM). The results demonstrate that in the bulk 7LZM folds through a process with four stable states: the folded state, the unfolded state, and two stable intermediates. The folding mechanism remains the same when the protein is tethered to a surface at most residues; however, in one case the folding mechanism changes in such a way as to eliminate one of the intermediates. An analysis of the molecular configurations shows that tethering at this site is advantageous for protein arrays because the active site is both presented to the bulk phase and stabilized. Taken as a whole, the results offer hope that rational design of protein arrays is possible once the behavior of the protein on the surface is ascertained.

Anti-fouling chemistry of chiral monolayers: enhancing biofilm resistance on racemic surface

This work reports the resistance to protein adsorption and bacterial biofilm formation by chiral monolayers of polyol-terminated alkanethiols surrounding micrometer-sized patterns of methyl-terminated alkanethiols on gold films. We discover that patterned surfaces surrounded by chiral polyol monolayers can distinguish different stages of biofilm formation. After inoculation on the surfaces, bacteria first reversibly attached on the chiral polyol monolayers. Over time, the bacteria detached from the polyol surfaces, and attached on the hydrophobic micropatterns to form biofilms. Interestingly, while both enantiomers of gulitol- and mannonamide-terminated monolayer resisted adsorption of proteins (bovine serum albumin, lysozyme, and fibrinogen) and confined biofilms formed on the micropatterns, the monolayers formed by the racemic mixture of either pair of enantiomers exhibited stronger antifouling chemistry against both protein adsorption and biofilm formation than monolayers formed by one enantiomer alone. These results reveal the different chemistries that separate the different stages of biofilm formation, and the stereochemical influence on resisting biofoulings at a molecular-level.

Modulating surface density of proteins via caged surfaces and controlled light exposure

We demonstrate the possibility of tuning the degree of functionalization of a surface using photoactivatable chemistries and controlled light exposure. A photosensitive organosilane with a protected amine terminal group and a tetraethyleneglycol spacer was synthesized. A o-nitrobenzyl cage was used as the photoremovable group to cage the amine functionality. Surfaces with phototunable amine densities were generated by controlled irradiation of silica substrates modified with the photosensitive anchor. Protein layers with different densities could be obtained by successive coupling and assembly steps. Protein surface concentrations were quantified by reflectance interference. Our results demonstrate that the protein density correlates with the photogenerated ligand density. The density control was proved over four coupling steps (biotin, SAv, (BT)tris-NTA, MBP, or GFP), indicating that the interactions between underlying layer and soluble targets are highly specific and the immobilized targets at the four levels maintain their full functionality. Protein micropatterns with a gradient of protein density were also obtained.

Simulations of water at the interface with hydrophilic self-assembled monolayers

Simulations of water at hydrophilic self-assembled monolayer (SAM) surfaces are especially relevant for biological interfaces. Well-defined, atomically smooth surfaces that can be continuously varied are possible with SAMs. These characteristics enable more accurate measurements than many other surfaces with the added advantage of tailoring the surface to treat specific chemical groups. A fundamental question is how solid surfaces affect the structure and dynamics of water. Measurements of the structure and dynamics of water at solid surfaces have improved significantly, but there remain differences among the experiments. In this article, the authors review simulations of water at the interface with hydrophilic SAMs. These simulations find that while the interfacial water molecules are slower than the bulk water molecules, the interfacial dynamics remains that of a liquid. A major biological application of SAMs is for making coatings resistant to protein adsorption. SAMs terminated with ethylene glycol monomers have proven to be excellent at resisting protein adsorption. Understanding the mechanisms behind this resistance remains an unresolved issue. Recent simulations suggest a new perspective of the role of interfacial water and the inseparable interplay between the SAM and the water.