Symmetry-based constant-time homonuclear dipolar recoupling in solid state NMR

Parallel β-Sheet Structure and Structural Heterogeneity Detected within Q11 Self-Assembling Peptide Nanofibers

Q11 peptide nanofibers are used as a biomaterial for applications such as antigen presentation and tissue engineering, yet detailed knowledge of molecular-level structure has not been reported. The Q11 peptide sequence was designed using heuristics-based patterning of hydrophobic and polar amino acids with oppositely charged amino acids placed at opposite ends of the sequence to promote antiparallel β-sheet formation. In this work, we employed solid-state nuclear magnetic resonance spectroscopy (NMR) to evaluate whether the molecular organization within Q11 self-assembled peptide nanofibers is consistent with the expectations of the peptide designers. We discovered that Q11 forms a distribution of molecular structures. NMR data from two-dimensional (2D) 13C-13C dipolar-assisted rotational resonance indicate that the K3 and E9 residues between Q11 β-strands are spatially proximate (within ∼0.6 nm). Frequency-selective rotational echo double resonance (fsREDOR) on K3 Nζ and E9 Cδ-labeled sites showed that approximately 9% of the sites are close enough for salt bridge formation to occur. Surprisingly, dipolar recoupling measurements revealed that Q11 peptides do not assemble into antiparallel β-sheets as expected, and structural analysis using Fourier-transform infrared spectroscopy and 2D NMR alone can be misleading. 13C PITHIRDS-CT dipolar recoupling measurements showed that the most abundant structure consists of parallel β-sheets, in contrast to the expected antiparallel β-sheet structure. Structural heterogeneity was detected from 15N{13C} REDOR measurements, with approximately 22% of β-strands having antiparallel nearest neighbors. We cannot propose a complete structural model of Q11 nanofibers because of the complexity involved when examining structurally heterogeneous samples using NMR. Altogether, our results show that while heuristics-based patterning is effective in promoting β-sheet formation, designing a peptide sequence to form a targeted β-strand arrangement remains challenging.

Cryo-EM and Solid State NMR Together Provide a More Comprehensive Structural Investigation of Protein Fibrils

The Tropomyosin 1 isoform I/C C-terminal domain (Tm1-LC) fibril structure is studied jointly with cryogenic electron microscopy (cryo-EM) and solid state nuclear magnetic resonance (NMR). This study demonstrates the complementary nature of these two structural biology techniques. Chemical shift assignments from solid state NMR are used to determine the secondary structure at the level of individual amino acids, which is faithfully seen in cryo-EM reconstructions. Additionally, solid state NMR demonstrates that the region not observed in the reconstructed cryo-EM density is primarily in a highly mobile random coil conformation rather than adopting multiple rigid conformations. Overall, this study illustrates the benefit of investigations combining cryo-EM and solid state NMR to investigate protein fibril structure.

A common pathway for detergent-assisted oligomerization of Aβ42

Amyloid beta (Aβ) aggregation is a slow process without seeding or assisted nucleation. Sodium dodecyl sulfate (SDS) micelles stabilize Aβ42 small oligomers (in the dimer to tetramer range); subsequent SDS removal leads to a 150-kD Aβ42 oligomer. Dodecylphosphorylcholine (DPC) micelles also stabilize an Aβ42 tetramer. Here we investigate the detergent-assisted oligomerization pathway by solid-state NMR spectroscopy and molecular dynamics simulations. SDS- and DPC-induced oligomers have the same structure, implying a common oligomerization pathway. An antiparallel β-sheet formed by the C-terminal region, the only stable structure in SDS and DPC micelles, is directly incorporated into the 150-kD oligomer. Three Gly residues (at positions 33, 37, and 38) create holes that are filled by the SDS and DPC hydrocarbon tails, thereby turning a potentially destabilizing feature into a stabilizing factor. These observations have implications for endogenous Aβ aggregation at cellular interfaces.

Solid-state NMR studies of amyloids

Amyloids have special structural properties and are involved in many aspects of biological function. In particular, amyloids are the cause or hallmarks of a group of notorious and incurable neurodegenerative diseases. The extraordinary high molecular weight and aggregation states of amyloids have posed a challenge for researchers studying them. Solid-state NMR (SSNMR) has been extensively applied to study the structures and dynamics of amyloids for the past 20 or more years and brought us tremendous progress in understanding their structure and related diseases. These studies, at the same time, helped to push SSNMR technical developments in sensitivity and resolution. In this review, some interesting research studies and important technical developments are highlighted to give the reader an overview of the current state of this field.

Calcium interactions in amelogenin-derived peptide assembly

Phosphorylation of serine residues has been recognized as a pivotal event in the evolution of mineralized tissues in many biological systems. During enamel development, the extracellular matrix protein amelogenin is most abundant and appears to be critical to the extreme high aspect ratios (length:width) of apatite mineral fibers reaching several millimeters in larger mammalian teeth. A 14-residue peptide (14P2, residues Gly8 to Thr21) was previously identified as a key sequence mediating amelogenin assembly formation, the domain also contains the native single phosphoserine residue (Ser16) of the full-length amelogenin. In this research, 14P2 and its phosphorylated form (p14P2) were investigated at pH 6.0 with various calcium and phosphate ion concentrations, indicating that both peptides could self-assemble into amyloid-like conformation but with differences in structural details. With calcium, the distance between ³¹P within the p14P2 self-assemblies is averaged to be 4.4 ± 0.2Å, determined by solid-state NMR ³¹P PITHIRDS-CT experiments. Combining with other experimental results, solid-state Nuclear Magnetic Resonance (SSNMR) suggests that the p14P2 self-assemblies are in parallel in-register β-sheet conformation and divalent calcium ions most likely connect two adjacent peptide chains by binding to the phosphate group of Ser16 and the carboxylate of Glu18 side-chain. This study on the interactions between calcium ions and amelogenin-derived peptides provides insights on how amelogenin may self-assemble in the presence of calcium ions in early enamel development.

Oligomer Formation by Amyloid-β42 in a Membrane-Mimicking Environment in Alzheimer's Disease

The brains of Alzheimer's disease (AD) patients contain numerous amyloid plaques that are diagnostic of the disease. The plaques are primarily composed of the amyloidogenic peptides proteins Aβ40 and Aβ42, which are derived by the processing of the amyloid pre-cursor protein (APP) by two proteases called β-secretase and γ-secretase. Aβ42 differs from Aβ40 in having two additional hydrophobic amino acids, ILE and ALA, at the C-terminus. A small percentage of AD is autosomal dominant (ADAD) and linked either to the genes for the presenilins, which are part of γ-secretase, or APP. Because ADAD shares most pathogenic features with widespread late-onset AD, Aβ peptides have become the focus of AD research. Fibrils formed by the aggregation of these peptides are the major component of plaques and were initially targeted in AD therapy. However, the fact that the abundance of plaques does not correlate well with cognitive decline in AD patients has led investigators to examine smaller Aβ aggregates called oligomers. The low levels and heterogeneity of Aβ oligomers have made the determination of their structures difficult, but recent structure determinations of oligomers either formed or initiated in detergents have been achieved. We report here on the structures of these oligomers and suggest how they may be involved in AD.

Early-Stage β-Amyloid-Membrane Interactions Modulate Lipid Dynamics and Influence Structural Interfaces and Fibrillation

Molecular interactions between β-amyloid (Aβ) peptide and membranes contribute to the neuronal toxicity of Aβ and the pathology of Alzheimer's disease (AD). Neuronal plasma membranes serve as biologically relevant environments for the Aβ aggregation process as well as affect the structural polymorphisms of Aβ aggregates. However, the nature of these interactions is unknown. Here, we utilized solid-state NMR spectroscopy to explore the site-specific interactions between Aβ peptides and lipids in synaptic plasma membranes at the membrane-associated nucleation stage. The key results show that different segments in the hydrophobic sequence of Aβ initiate membrane binding and inter-strand assembling. We demonstrate early-stage Aβ-lipid interactions modulate lipid dynamics, leading to more rapid lipid headgroup motion and reduced lateral diffusive motion. These early events influence the structural polymorphisms of yielded membrane-associated Aβ fibrils with distinct C-terminal quaternary interface structure compared to fibrils grown in aqueous solutions. Based on our results, we propose a schematic mechanism by which Aβ-lipid interactions drive membrane-associated nucleation processes, providing molecular insights into the early events of fibrillation in biological environments.

Selective Nuclear Magnetic Resonance Method for Enhancing Long-Range Heteronuclear Correlations in Solids

The long-range heteronuclear correlation remains a significant challenge in solid-state nuclear magnetic resonance (NMR), which is critical in the structural elucidation of biomolecular, material, and pharmaceutical solids. We propose a selective NMR method, heteronuclear selective phase-optimized recoupling (hetSPR), to selectively enhance long-range correlations of interest by utilizing characteristic chemical shifts. Compared to conventional methods, hetSPR can selectively enhance desired heteronuclear correlations (e.g., ¹H-¹³C and ¹H-¹⁹F) by factors up to 5 and largely suppress the unwanted ones. The method proves useful by enhancing the long-range correlation from an intermolecular ¹H-¹⁹F distance of 4.8 Å by a factor of 2.4 in a fluorinated pharmaceutical drug, bicalutamide, under fast magic-angle spinning. It does not use selective pulses and is thus user-friendly even for nonexperts. The new method is expected to boost solid-state NMR to elucidate the structures of various solids.

Solid-State NMR: Methods for Biological Solids

In the last two decades, solid-state nuclear magnetic resonance (ssNMR) spectroscopy has transformed from a spectroscopic technique investigating small molecules and industrial polymers to a potent tool decrypting structure and underlying dynamics of complex biological systems, such as membrane proteins, fibrils, and assemblies, in near-physiological environments and temperatures. This transformation can be ascribed to improvements in hardware design, sample preparation, pulsed methods, isotope labeling strategies, resolution, and sensitivity. The fundamental engagement between nuclear spins and radio-frequency pulses in the presence of a strong static magnetic field is identical between solution and ssNMR, but the experimental procedures vastly differ because of the absence of molecular tumbling in solids. This review discusses routinely employed state-of-the-art static and MAS pulsed NMR methods relevant for biological samples with rotational correlation times exceeding 100's of nanoseconds. Recent developments in signal filtering approaches, proton methodologies, and multiple acquisition techniques to boost sensitivity and speed up data acquisition at fast MAS are also discussed. Several examples of protein structures (globular, membrane, fibrils, and assemblies) solved with ssNMR spectroscopy have been considered. We also discuss integrated approaches to structurally characterize challenging biological systems and some newly emanating subdisciplines in ssNMR spectroscopy.

Solid-State NMR Dipolar and Chemical Shift Anisotropy Recoupling Techniques for Structural and Dynamical Studies in Biological Systems

With the development of NMR methodology and technology during the past decades, solid-state NMR (ssNMR) has become a particularly important tool for investigating structure and dynamics at atomic scale in biological systems, where the recoupling techniques play pivotal roles in modern high-resolution MAS NMR. In this review, following a brief introduction on the basic theory of recoupling in ssNMR, we highlight the recent advances in dipolar and chemical shift anisotropy recoupling methods, as well as their applications in structural determination and dynamical characterization at multiple time scales (i.e., fast-, intermediate-, and slow-motion). The performances of these prevalent recoupling techniques are compared and discussed in multiple aspects, together with the representative applications in biomolecules. Given the recent emerging advances in NMR technology, new challenges for recoupling methodology development and potential opportunities for biological systems are also discussed.

Cross-Seeded Fibrillation Induced by Pyroglutamate-3 and Truncated Aβ40 Variants Leads to Aβ40 Structural Polymorphism Modulation and Elevated Toxicity

The pathological amyloid plaques in Alzheimer's disease (AD) patients contain not only the wild-type β-amyloid (wt-Aβ) peptide sequences but also a variety of post-translationally modified variants. The pyroglutamate-3 Aβ (pyroE3-Aβ), which is generated from its truncated precursors ΔE3-Aβ, shows the highest abundance among all modified Aβ variants. Previous works have shown that pyroE3-Aβ and/or ΔE3-Aβ, compared with the wild-type sequences, led to a more rapid fibrillation process and final fibrils with higher neuronal cytotoxicity levels. However, much less is known about how the formation of pyroE3/ΔE3-Aβ fibrils would affect the amyloid deposition of wt-Aβ peptides, which are the main pathological events in AD. We show in the present work that the pyroE3/ΔE3-Aβ₄₀ fibrils differ significantly from the wt-Aβ₄₀ fibrils in terms of their molecular structures. When added into monomeric wt-Aβ₄₀ peptides, these variant fibrils can cross-seed the formation of wt-Aβ₄₀ fibrils with fibrillation kinetics that are greater than the self-seeded fibrillation of wt-Aβ₄₀. Furthermore, the cross-seeding process modulates the molecular structures of the yielded wt-Aβ₄₀ fibrils, which show similar features as their variant seeds. The cross-seeded fibrillation process also induces higher cytotoxicity levels compared with the self-seeded fibrillation of wt-Aβ₄₀. Overall, our results support the hypothesis that pyroE3 and ΔE3-Aβ₄₀ variants may serve as triggering factors of the pathological amyloid aggregation of wt-Aβ₄₀ and may underlie the pathological significance of pyroE3/ΔE3-Aβ₄₀ variants on the structural polymorphism of Aβ deposits.

Constraints on the Structure of Fibrils Formed by a Racemic Mixture of Amyloid-β Peptides from Solid-State NMR, Electron Microscopy, and Theory

Previous studies have shown that racemic mixtures of 40- and 42-residue amyloid-β peptides (d,l-Aβ40 and d,l-Aβ42) form amyloid fibrils with accelerated kinetics and enhanced stability relative to their homochiral counterparts (l-Aβ40 and l-Aβ42), suggesting a "chiral inactivation" approach to abrogating the neurotoxicity of Aβ oligomers (Aβ-CI). Here we report a structural study of d,l-Aβ40 fibrils, using electron microscopy, solid-state nuclear magnetic resonance (NMR), and density functional theory (DFT) calculations. Two- and three-dimensional solid-state NMR spectra indicate molecular conformations in d,l-Aβ40 fibrils that resemble those in known l-Aβ40 fibril structures. However, quantitative measurements of 13C-13C and 15N-13C distances in selectively labeled d,l-Aβ40 fibril samples indicate a qualitatively different supramolecular structure. While cross-β structures in mature l-Aβ40 fibrils are comprised of in-register, parallel β-sheets, our data indicate antiparallel β-sheets in d,l-Aβ40 fibrils, with alternation of d and l molecules along the fibril growth direction, i.e., antiparallel "rippled sheet" structures. The solid-state NMR data suggest the coexistence of d,l-Aβ40 fibril polymorphs with three different registries of intermolecular hydrogen bonds within the antiparallel rippled sheets. DFT calculations support an energetic preference for antiparallel alignments of the β-strand segments identified by solid-state NMR. These results provide insight into the structural basis for Aβ-CI and establish the importance of rippled sheets in self-assembly of full-length, naturally occurring amyloidogenic peptides.

Hierarchical Nanomaterials Assembled from Peptoids and Other Sequence-Defined Synthetic Polymers

In nature, the self-assembly of sequence-specific biopolymers into hierarchical structures plays an essential role in the construction of functional biomaterials. To develop synthetic materials that can mimic and surpass the function of these natural counterparts, various sequence-defined bio- and biomimetic polymers have been developed and exploited as building blocks for hierarchical self-assembly. This review summarizes the recent advances in the molecular self-assembly of hierarchical nanomaterials based on peptoids (or poly-N-substituted glycines) and other sequence-defined synthetic polymers. Modern techniques to monitor the assembly mechanisms and characterize the physicochemical properties of these self-assembly systems are highlighted. In addition, discussions about their potential applications in biomedical sciences and renewable energy are also included. This review aims to highlight essential features of sequence-defined synthetic polymers (e.g., high stability and protein-like high-information content) and how these unique features enable the construction of robust biomimetic functional materials with high programmability and predictability, with an emphasis on peptoids and their self-assembled nanomaterials.

Transiently structured head domains control intermediate filament assembly

Assembly of intermediate filaments (IFs) is reliant upon amino-terminal head domains. These head domains are of low sequence complexity and are assumed to function in the absence of structural order. Herein, we provide evidence that the head domains of the desmin and neurofilament light (NFL) IF proteins self-associate via the formation of labile but structurally specific cross-β interaction. Disease-causing mutations in the head domains of both proteins cause enhanced cross-β interactions. By assembling desmin and NFL IFs bearing isotopically labeled head domains, we provide evidence of structural order in properly assembled biological filaments. We propose that these observations on IF head domains may be instructive to the function of low complexity domains operative in other aspects of cell biology.

Low complexity (LC) head domains 92 and 108 residues in length are, respectively, required for assembly of neurofilament light (NFL) and desmin intermediate filaments (IFs). As studied in isolation, these IF head domains interconvert between states of conformational disorder and labile, β-strand–enriched polymers. Solid-state NMR (ss-NMR) spectroscopic studies of NFL and desmin head domain polymers reveal spectral patterns consistent with structural order. A combination of intein chemistry and segmental isotope labeling allowed preparation of fully assembled NFL and desmin IFs that could also be studied by ss-NMR. Assembled IFs revealed spectra overlapping with those observed for β-strand–enriched polymers formed from the isolated NFL and desmin head domains. Phosphorylation and disease-causing mutations reciprocally alter NFL and desmin head domain self-association yet commonly impede IF assembly. These observations show how facultative structural assembly of LC domains via labile, β-strand–enriched self-interactions may broadly influence cell morphology.

CATCH Peptides Coassemble into Structurally Heterogeneous β-Sheet Nanofibers with Little Preference to β-Strand Alignment

Coassembling peptides offer an additional degree of freedom in the design of nanostructured biomaterials when compared to analogous self-assembling peptides. Yet, our understanding of how amino acid sequences encodes coassembled nanofiber structure is limited. Prior work on a charge-complementary pair, CATCH+ and CATCH- peptides, detected like-peptide nearest neighbors (CATCH+:CATCH+ and CATCH-:CATCH-) within coassembled β-sheet nanofibers; these self-associated peptide pairs marked a departure from an "ideal" coassembled structure. In this work, we employ solid-state NMR, isotope-edited FTIR, and coarse-grained molecular dynamics simulations to evaluate the alignment of β-strands within CATCH peptide nanofibers. Both experimental and computational results suggest that CATCH molecules coassemble into structurally heterogeneous nanofibers, which is consistent with our observations in another coassembling system, the King-Webb peptides. Within β-sheet nanofibers, β-strands were found to have nearest neighbors aligned in-register parallel, in-register antiparallel, and out-of-register. In comparison to the King-Webb peptides, CATCH nanofibers exhibit a greater degree of structural heterogeneity. By comparing the amino acid sequences of CATCH and King-Webb peptides, we can begin to unravel sequence-to-structure relationships, which may encode more precise coassembled β-sheet nanostructures.

Structural Arrangement within a Peptide Fibril Derived from the Glaucoma-Associated Myocilin Olfactomedin Domain

Myocilin-associated glaucoma is a new addition to the list of diseases linked to protein misfolding and amyloid formation. Single point variants of the ∼257-residue myocilin olfactomedin domain (mOLF) lead to mutant myocilin aggregation. Here, we analyze the 12-residue peptide P1 (GAVVYSGSLYFQ), corresponding to residues 326-337 of mOLF, previously shown to form amyloid fibrils in vitro and in silico. We applied solid-state NMR structural measurements to test the hypothesis that P1 fibrils adopt one of three predicted structures. Our data are consistent with a U-shaped fibril arrangement for P1, one that is related to the U-shape predicted previously in silico. Our data are also consistent with an antiparallel fibril arrangement, likely driven by terminal electrostatics. Our proposed structural model is reminiscent of fibrils formed by the Aβ(1-40) Iowa mutant peptide, but with a different arrangement of molecular turn regions. Taken together, our results strengthen the connection between mOLF fibrils and the broader amylome and contribute to our understanding of the fundamental molecular interactions governing fibril architecture and stability.

Time-Dependent Lipid Dynamics, Organization and Peptide-Lipid Interaction in Phospholipid Bilayers with Incorporated β-Amyloid Oligomers

Nonfibrillar β-amyloid (Aβ) oligomers are considered as major neurotoxic species in the pathology of Alzheimer's disease. The presence of Aβ oligomers was shown to cause membrane disruptions in a broad range of model systems. However, the molecular basis of such a disruption process remains unknown. We previously demonstrated that membrane-incorporated 40-residue Aβ (Aβ₄₀) oligomers could form coaggregates with phospholipids. This process occurred more rapidly than the fibrillization of Aβ₄₀ and led to more severe membrane disruption. The present study probes the time-dependent changes in lipid dynamics, bilayer structures, and peptide-lipid interactions along the time course of the oligomer-induced membrane disruption, using solid-state NMR spectroscopy. Our results suggest the presence of certain intermediate states with phospholipid molecules entering the C-terminal hydrogen-bonding networks of the Aβ₄₀ oligomeric cores. This work provides insights on the molecular mechanisms of Aβ₄₀-oligomer-induced membrane disruption.

Selectively Enhanced 1H-1H Correlations in Proton-Detected Solid-State NMR under Ultrafast MAS Conditions

Proton-detected solid-state NMR has emerged as a powerful analytical technique in structural elucidation via ¹H-¹H correlations, which are mostly established by broadband methods. We propose a new class of frequency-selective homonuclear recoupling methods to selectively enhance ¹H-¹H correlations of interest under ultrafast magic-angle spinning (MAS). These methods, dubbed as selective phase-optimized recoupling (SPR), can provide a sensitivity enhancement by a factor of ∼3 over the widely used radio-frequency-driven recoupling (RFDR) to observe ¹H_N-¹H_N contacts in a protonated tripeptide N-formyl-Met-Leu-Phe (fMLF) under 150 kHz MAS and are successfully utilized to probe a long-range ¹H-¹H contact in a pharmaceutical molecule, the hydrochloride form of pioglitazone (PIO-HCl). SPR is not only highly efficient in frequency-selective recoupling but also easy to implement, imparting to it great potential to probe ¹H-¹H contacts for the structural elucidation of organic solids such as proteins and pharmaceuticals under ultrafast MAS conditions.

Scaled recoupling of chemical shift anisotropies at high magnetic fields under MAS with interspersed C-elements

The power of chemical shift anisotropy (CSA) measurements for probing structure and dynamics of molecules has been long recognized. NMR pulse sequences that allow measurement of CSA values in an indirect dimension of a protein correlation spectrum have been employed for aliphatic groups, but for practical reasons, carbonyl functional groups have been little studied, despite the fact that carbonyls are expected to give particularly varied and informative CSA values. Specifically, the wide spectral widths of carbonyl tensors make their measurements difficult with typically attainable spectrometer settings. We present here an extended family of experiments that enable the recovery of static CSA lineshapes in an indirect dimension of magic angle spinning (MAS) solid-state NMR experiments, except for various real valued scaling factors. The experiment is suitable for uniformly labeled material, at moderate MAS rates (10 kHz-30 kHz) and at higher magnetic fields (ν0H > 600 MHz). Specifically, the experiments are based on pulse sequence elements from a previous commonly used pulse sequence for CSA measurement, recoupling of chemical shift anisotropy (ROCSA), while modification of scaling factors is achieved by interspersing different blocks of C-elements of the same Cnn 1 cycle. Using experimental conditions similar to the parent ROCSA sequence, a CSA scaling factor between 0 and 0.272 can be obtained, thus allowing a useful practical range of possibilities in experimental conditions for measurement of larger CSA values. Using these blocks, it is also possible to make a constant-time CSA recoupling sequence. The effectiveness of this approach, fROCSA, is shown on model compounds 1-13C-Gly, U-13C,15N-l-His, and microcrystalline U-13C,15N-Ubiquitin.

Can proton-proton recoupling in fully protonated solids provide quantitative, selective and efficient polarization transfer?

Dipolar recoupling sequences have been used to probe spatial proximity of nuclear spins and were traditionally designed to probe rare spins such as ¹³C and/or ¹⁵N nuclei. The multi-spin dipolar-coupling network of the rare spins is weak due to smaller couplings and large chemical shift dispersion. Therefore, the recoupling approaches were tailored to design offset compensated or broadband sequences. In contrast, protons have a substantially stronger dipolar-coupling network and much narrower chemical shift range. Broadband recoupling sequences such as radio-frequency driven recoupling (RFDR), back-to-back (BABA), and lab frame proton-proton spin diffusion have been routinely used to characterize the structures of protein/macromolecules and small molecules. Recently selective ¹H-¹H recoupling sequences have been proposed that combine chemical shift offset of the resolved proton spectrum (at fast MAS) with first- and second-order dipolar recoupling Hamiltonians to obtain quantitative and qualitative proton distances, respectively. Herein, we evaluate the performances of broadband and selective proton recoupling sequences such as finite pulse RFDR (fp-RFDR), band-selective spectral spin diffusion (BASS-SD), second-order cross-polarization (SOCP), and selective recoupling of proton (SERP) in terms of the selectivity and efficiency of ¹H-¹H polarization transfers in a dense network of proton spins and explore the possibility of measuring ¹H-¹H distances. We use theoretical considerations, numerical simulations, and experiments to support the distinct advantages and disadvantages of each recoupling sequence. Experiments were performed on L-histidine.HCl.H₂O at a MAS frequency of 71.43 kHz. This study rationalizes the proper selection of ¹H-¹H recoupling sequences when working with fully protonated solids.

N-Terminal Modified Aβ Variants Enable Modulations to the Structures and Cytotoxicity Levels of Wild-Type Aβ Fibrils through Cross-Seeding

Post-translational modifications (PTMs) of β-amyloid (Aβ) peptides are considered as triggering factors in sporadic Alzheimer's disease. However, studies to show the influence of pre-existing PTM-Aβ fibrils on wild-type Aβ peptides, which directly mimic the triggering scenarios, are rare. Here we show that three types of pathologically relevant PTM-Aβ variants with modifications in a particular segment (from D7 to V12) of the primary sequence lead to distinct impacts on the fibrillization of wild-type Aβ peptides. In general, the triggering effects are observed through cross-seeding between the PTM-Aβ seeds and wild-type peptides, which consequently induce modulations in the resultant wild-type fibril structures and elevations in the fibrillar cytotoxicity levels. Modifications with a similar chemical nature, such as the S8-phosphorylation and Y10-nitration, both of which introduce additional side-chain negative charges, show comparable structural-modulation and cytotoxicity-elevation effects. The results imply the biological influences of PTM-Aβ variants on the formation of amyloid deposits through cross-seeded fibrillization.

Out-of-Register Parallel β-Sheets and Antiparallel β-Sheets Coexist in 150-kDa Oligomers Formed by Amyloid-β(1-42)

We present solid-state NMR measurements of β-strand secondary structure and inter-strand organization within a 150-kDa oligomeric aggregate of the 42-residue variant of the Alzheimer's amyloid-β peptide (Aβ(1-42)). We build upon our previous report of a β-strand spanned by residues 30-42, which arranges into an antiparallel β-sheet. New results presented here indicate that there is a second β-strand formed by residues 11-24. Contrary to expectations, NMR data indicate that this second β-strand is organized into a parallel β-sheet despite the co-existence of an antiparallel β-sheet in the same structure. In addition, the in-register parallel β-sheet commonly observed for amyloid fibril structure does not apply to residues 11-24 in the 150-kDa oligomer. Rather, we present evidence for an inter-strand registry shift of three residues that likely alternate in direction between adjacent molecules along the β-sheet. We corroborated this unexpected scheme for β-strand organization using multiple two-dimensional NMR and ¹³C-¹³C dipolar recoupling experiments. Our findings indicate a previously unknown assembly pathway and inspire a suggestion as to why this aggregate does not grow to larger sizes.

Molecular complementarity and structural heterogeneity within co-assembled peptide β-sheet nanofibers

Self-assembling peptides have garnered an increasing amount of interest as a functional biomaterial for medical and biotechnological applications. Recently, β-sheet peptide designs utilizing complementary pairs of peptides composed of charged amino acids positioned to impart co-assembly behavior have expanded the portfolio of peptide aggregate structures. Structural characterization of these charge-complementary peptide co-assemblies has been limited. Thus, it is not known how the complementary peptides organize on the molecular level. Through a combination of solid-state NMR measurements and discontinuous molecular dynamics simulations, we investigate the molecular organization of King-Webb peptide nanofibers. KW+ and KW- peptides co-assemble into near stoichiometric two-component β-sheet structures as observed by computational simulations and ¹³C-¹³C dipolar couplings. A majority of β-strands are aligned with antiparallel nearest neighbors within the β-sheet as previously suggested by Fourier transform infrared spectroscopy measurements. Surprisingly, however, a significant proportion of β-strand neighbors are parallel. While charge-complementary peptides were previously assumed to organize in an ideal (AB)_n pattern, dipolar recoupling measurements on isotopically diluted nanofiber samples reveal a non-negligible amount of self-associated (AA and BB) pairs. Furthermore, computational simulations predict these different structures can coexist within the same nanofiber. Our results highlight structural disorder at the molecular level in a charge-complementary peptide system with implications on co-assembling peptide designs.

Anatomy of a selectively coassembled β-sheet peptide nanofiber

Peptide self-assembly, wherein molecule A associates with other A molecules to form fibrillar β-sheet structures, is common in nature and widely used to fabricate synthetic biomaterials. Selective coassembly of peptide pairs A and B with complementary partial charges is gaining interest due to its potential for expanding the form and function of biomaterials that can be realized. It has been hypothesized that charge-complementary peptides organize into alternating ABAB-type arrangements within assembled β-sheets, but no direct molecular-level evidence exists to support this interpretation. We report a computational and experimental approach to characterize molecular-level organization of the established peptide pair, CATCH. Discontinuous molecular dynamics simulations predict that CATCH(+) and CATCH(-) peptides coassemble but do not self-assemble. Two-layer β-sheet amyloid structures predominate, but off-pathway β-barrel oligomers are also predicted. At low concentration, transmission electron microscopy and dynamic light scattering identified nonfibrillar ∼20-nm oligomers, while at high concentrations elongated fibers predominated. Thioflavin T fluorimetry estimates rapid and near-stoichiometric coassembly of CATCH(+) and CATCH(-) at concentrations ≥100 μM. Natural abundance ¹³C NMR and isotope-edited Fourier transform infrared spectroscopy indicate that CATCH(+) and CATCH(-) coassemble into two-component nanofibers instead of self-sorting. However, ¹³C-¹³C dipolar recoupling solid-state NMR measurements also identify nonnegligible AA and BB interactions among a majority of AB pairs. Collectively, these results demonstrate that strictly alternating arrangements of β-strands predominate in coassembled CATCH structures, but deviations from perfect alternation occur. Off-pathway β-barrel oligomers are also suggested to occur in coassembled β-strand peptide systems.

Development of a new largely scalable in vitro prion propagation method for the production of infectious recombinant prions for high resolution structural studies

The resolution of the three-dimensional structure of infectious prions at the atomic level is pivotal to understand the pathobiology of Transmissible Spongiform Encephalopathies (TSE), but has been long hindered due to certain particularities of these proteinaceous pathogens. Difficulties related to their purification from brain homogenates of disease-affected animals were resolved almost a decade ago by the development of in vitro recombinant prion propagation systems giving rise to highly infectious recombinant prions. However, lack of knowledge about the molecular mechanisms of the misfolding event and the complexity of systems such as the Protein Misfolding Cyclic Amplification (PMCA), have limited generating the large amounts of homogeneous recombinant prion preparations required for high-resolution techniques such as solid state Nuclear Magnetic Resonance (ssNMR) imaging. Herein, we present a novel recombinant prion propagation system based on PMCA that substitutes sonication with shaking thereby allowing the production of unprecedented amounts of multi-labeled, infectious recombinant prions. The use of specific cofactors, such as dextran sulfate, limit the structural heterogeneity of the in vitro propagated prions and makes possible, for the first time, the generation of infectious and likely homogeneous samples in sufficient quantities for studies with high-resolution structural techniques as demonstrated by the preliminary ssNMR spectrum presented here. Overall, we consider that this new method named Protein Misfolding Shaking Amplification (PMSA), opens new avenues to finally elucidate the three-dimensional structure of infectious prions.

Molecular structure of an N-terminal phosphorylated β-amyloid fibril

The structural polymorphism in β-amyloid (Aβ) plaques from Alzheimer disease (AD) has been recognized as an important pathological factor. Plaques from sporadic AD patients contain fibrillar deposits of various amyloid proteins/peptides, including posttranslational modified Aβ (PTM-Aβ) subtypes. Although many PTM-Aβs were shown to accelerate the fibrillation process, increase neuronal cytotoxicity of aggregates, or enhance the stability of fibrils, the contribution of PTM-Aβs to structural polymorphisms and their pathological roles remains unclear. We report here the NMR-based structure for the Ser-8-phosphorylated 40-residue Aβ (pS8-Aβ40) fibrils, which shows significant difference to the wild-type fibrils, with higher cross-seeding efficiency and thermodynamic stability. Given these physicochemical properties, the structures originated from pS8-Aβ40 fibrils may potentially dominate the polymorphisms in the mixture of wild-type and phosphorylated Aβ deposits. Our results imply that Aβ subtypes with "seeding-prone" properties may influence the polymorphisms of amyloid plaques through the cross-seeding process.

Optimization of band-selective homonuclear dipolar recoupling in solid-state NMR by a numerical phase search

Spin polarization transfers among aliphatic ¹³C nuclei, especially ¹³Cα-¹³Cβ transfers, permit correlations of their nuclear magnetic resonance (NMR) frequencies that are essential for signal assignments in multidimensional solid-state NMR of proteins. We derive and demonstrate a new radio-frequency (RF) excitation sequence for homonuclear dipolar recoupling that enhances spin polarization transfers among aliphatic ¹³C nuclei at moderate magic-angle spinning (MAS) frequencies. The phase-optimized recoupling sequence with five π pulses per MAS rotation period (denoted as PR5) is derived initially from systematic numerical simulations in which only the RF phases are varied. Subsequent theoretical analysis by average Hamiltonian theory explains the favorable properties of numerically optimized phase schemes. The high efficiency of spin polarization transfers in simulations is preserved in experiments, in part because the RF field amplitude in PR5 is only 2.5 times the MAS frequency so that relatively low ¹H decoupling powers are required. Experiments on a microcrystalline sample of the β1 immunoglobulin binding domain of protein G demonstrate an average enhancement factor of 1.6 for ¹³Cα → ¹³Cβ polarization transfers, compared to the standard ¹³C-¹³C spin-diffusion method, implying a two-fold time saving in relevant 2D and 3D experiments.

Principles Governing Catalytic Activity of Self-Assembled Short Peptides

Molecular self-assembly provides a chemical strategy for the synthesis of nanostructures by using the principles of nature, and peptides serve as the promising building blocks to construct adaptable molecular architectures. Recently, a series of heptapeptides with alternative hydrophobic and hydrophilic residues were reported to form amyloid-like structures, which are capable of catalyzing acyl ester hydrolysis with remarkable efficiency. However, information remains elusive about the atomic structures of the fibrils. What is the origin of the sequence-dependent catalytic activity? How is the ester hydrolysis catalyzed by the fibrils? In this work, the atomic structures of the aggregates were determined by using molecular modeling and further validated by solid-state NMR experiments, where the fibril with high activity adopts twisted parallel configuration within each layer, and the one with low activity is in flat antiparallel configuration. The polymorphism originates from the interactions between different regions of the building block peptides, where the delicate balance between rigidity and flexibility plays an important role. We further show that the p-nitrophenylacetate ( pNPA) hydrolysis reactions catalyzed by two different fibrils follow a similar mechanism, and the difference in microenvironment at the active site between the natural enzyme and the present self-assembled fibrils should account for the discrepancy in catalytic activities. The present work provides understanding of the structure and function of self-assembled fibrils formed with short peptides at an atomic level and thus sheds new insight on designing aggregates with better functions.

Biomolecular Assemblies: Moving from Observation to Predictive Design

Biomolecular assembly is a key driving force in nearly all life processes, providing structure, information storage, and communication within cells and at the whole organism level. These assembly processes rely on precise interactions between functional groups on nucleic acids, proteins, carbohydrates, and small molecules, and can be fine-tuned to span a range of time, length, and complexity scales. Recognizing the power of these motifs, researchers have sought to emulate and engineer biomolecular assemblies in the laboratory, with goals ranging from modulating cellular function to the creation of new polymeric materials. In most cases, engineering efforts are inspired or informed by understanding the structure and properties of naturally occurring assemblies, which has in turn fueled the development of predictive models that enable computational design of novel assemblies. This Review will focus on selected examples of protein assemblies, highlighting the story arc from initial discovery of an assembly, through initial engineering attempts, toward the ultimate goal of predictive design. The aim of this Review is to highlight areas where significant progress has been made, as well as to outline remaining challenges, as solving these challenges will be the key that unlocks the full power of biomolecules for advances in technology and medicine.

Structure determination of supra-molecular assemblies by solid-state NMR: Practical considerations

In the cellular environment, biomolecules assemble in large complexes which can act as molecular machines. Determining the structure of intact assemblies can reveal conformations and inter-molecular interactions that are only present in the context of the full assembly. Solid-state NMR (ssNMR) spectroscopy is a technique suitable for the study of samples with high molecular weight that allows the atomic structure determination of such large protein assemblies under nearly physiological conditions. This review provides a practical guide for the first steps of studying biological supra-molecular assemblies using ssNMR. The production of isotope-labeled samples is achievable via several means, which include recombinant expression, cell-free protein synthesis, extraction of assemblies directly from cells, or even the study of assemblies in whole cells in situ. Specialized isotope labeling schemes greatly facilitate the assignment of chemical shifts and the collection of structural data. Advanced strategies such as mixed, diluted, or segmental subunit labeling offer the possibility to study inter-molecular interfaces. Detailed and practical considerations are presented with respect to first setting up magic-angle spinning (MAS) ssNMR experiments, including the selection of the ssNMR rotor, different methods to best transfer the sample and prepare the rotor, as well as common and robust procedures for the calibration of the instrument. Diagnostic spectra to evaluate the resolution and sensitivity of the sample are presented. Possible improvements that can reduce sample heterogeneity and improve the quality of ssNMR spectra are reviewed.

Structural characterization of the D290V mutation site in hnRNPA2 low-complexity-domain polymers

Human genetic studies have given evidence of familial, disease-causing mutations in the analogous amino acid residue shared by three related RNA binding proteins causative of three neurological diseases. Alteration of aspartic acid residue 290 of hnRNPA2 to valine is believed to predispose patients to multisystem proteinopathy. Mutation of aspartic acid 262 of hnRNPA1 to either valine or asparagine has been linked to either amyotrophic lateral sclerosis or multisystem proteinopathy. Mutation of aspartic acid 378 of hnRNPDL to either asparagine or histidine has been associated with limb girdle muscular dystrophy. All three of these aspartic acid residues map to evolutionarily conserved regions of low-complexity (LC) sequence that may function in states of either intrinsic disorder or labile self-association. Here, we present a combination of solid-state NMR spectroscopy with segmental isotope labeling and electron microscopy on the LC domain of the hnRNPA2 protein. We show that, for both the wild-type protein and the aspartic acid 290-to-valine mutant, labile polymers are formed in which the LC domain associates into an in-register cross-β conformation. Aspartic acid 290 is shown to be charged at physiological pH and immobilized within the polymer core. Polymers of the aspartic acid 290-to-valine mutant are thermodynamically more stable than wild-type polymers. These observations give evidence that removal of destabilizing electrostatic interactions may be responsible for the increased propensity of the mutated LC domains to self-associate in disease-causing conformations.

Fabrication and Microscopic and Spectroscopic Characterization of Cytocompatible Self-Assembling Antimicrobial Nanofibers

The discovery of antimicrobial peptides (AMPs) has brought tremendous promise and opportunities to overcome the prevalence of bacterial resistance to commonly used antibiotics. However, their widespread use and translation into clinical application is hampered by the moderate to severe hemolytic activity and cytotoxicity. Here, we presented and validated a supramolecular platform for the construction of hemo- and cytocompatible AMP-based nanomaterials, termed self-assembling antimicrobial nanofibers (SAANs). SAANs, the "nucleus" of our antimicrobial therapeutic platform, are supramolecular assemblies of de novo designed AMPs that undergo programmed self-assembly into nanostructured fibers to "punch holes" in the bacterial membrane, thus killing the bacterial pathogen. In this study, we performed solid-state NMR spectroscopy showing predominant antiparallel β-sheet assemblies rather than monomers to interact with liposomes. We investigated the mode of antimicrobial action of SAANs using transmission electron microscopy and provided compelling microscopic evidence that self-assembled nanofibers were physically in contact with bacterial cells causing local membrane deformation and rupture. While effectively killing bacteria, SAANs, owing to their nanoparticulate nature, were found to cross mammalian cell membranes harmlessly with greatly reduced membrane accumulation and possess exceptional cytocompatibility and hemocompatibility compared to natural AMPs. Through these systematic investigations, we expect to establish this new paradigm for the customized design of SAANs that will provide exquisite, tunable control of both bactericidal activity and cytocompatibility and can potentially overcome the drawbacks of traditional AMPs.

The on-fibrillation-pathway membrane content leakage and off-fibrillation-pathway lipid mixing induced by 40-residue β-amyloid peptides in biologically relevant model liposomes

Disruption of the synaptic plasma membrane (SPM) induced by the aggregation of β-amyloid (Aβ) peptides has been considered as a potential mechanism for the neurotoxicity of Aβ in Alzheimer's disease (AD). However, the molecular basis of such membrane disruption process remains unclear, mainly because of the severe systematic heterogeneity problem that prevents the high-resolution studies. Our previous studies using a two-component phosphatidylcholine (PC)/phosphatidylglycerol (PG) model liposome showed the presence of Aβ-induced membrane disruptions that were either on the pathway or off the pathway of fibril formation. The present study focuses on a more biologically relevant model membrane with compositions that mimic the outer leaflet of SPMs. The main findings are: (1) the two competing membrane disruption effects discovered in PC/PG liposomes and their general peptide-to-lipid-molar-ratio dependence persist in the more complicated membrane models; (2) the SPM-mimic membrane promotes the formation of certain "on-fibrillation-pathway" intermediates with higher α-helical structural population, which lead to more rapid and significant of membrane content leakage; (3) although the "on-fibrillation-pathway" intermediate structures show dependence on membrane compositions, there seems to be a common final fibril structure grown from different liposomes, suggesting that there may be a predominant fibril structure for 40-residue Aβ (i.e. Aβ40) peptides in biologically-relevant membranes. This article is part of a Special Issue entitled: Protein Aggregation and Misfolding at the Cell Membrane Interface edited by Ayyalusamy Ramamoorthy.

Understanding amyloid fibril formation using protein fragments: structural investigations via vibrational spectroscopy and solid-state NMR

It is well established that amyloid proteins play a primary role in neurodegenerative diseases. Alzheimer's, Parkinson's, type II diabetes, and Creutzfeldt-Jakob's diseases are part of a wider family encompassing more than 50 human pathologies related to aggregation of proteins. Although this field of research is thoroughly investigated, several aspects of fibrillization remain misunderstood, which in turn slows down, or even impedes, advances in treating and curing amyloidoses. To solve this problem, several research groups have chosen to focus on short fragments of amyloid proteins, sequences that have been found to be of great importance for the amyloid formation process. Studying short peptides allows bypassing the complexity of working with full-length proteins and may provide important information relative to critical segments of amyloid proteins. To this end, efficient biophysical tools are required. In this review, we focus on two essential types of spectroscopic techniques, i.e., vibrational spectroscopy and its derivatives (conventional Raman scattering, deep-UV resonance Raman (DUVRR), Raman optical activity (ROA), surface-enhanced Raman spectroscopy (SERS), tip-enhanced Raman spectroscopy (TERS), infrared (IR) absorption spectroscopy, vibrational circular dichroism (VCD)) and solid-state nuclear magnetic resonance (ssNMR). These techniques revealed powerful to provide a better atomic and molecular comprehension of the amyloidogenic process and fibril structure. This review aims at underlining the information that these techniques can provide and at highlighting their strengths and weaknesses when studying amyloid fragments. Meaningful examples from the literature are provided for each technique, and their complementarity is stressed for the kinetic and structural characterization of amyloid fibril formation.

Evidence for cis Amide Bonds in Peptoid Nanosheets

Peptoid nanosheets are supramolecular protein-mimetic materials that form from amphiphilic polypeptoids with aromatic and ionic side chains. Nanosheets have been studied at the nanometer scale, but the molecular structure has been difficult to probe. We report the use of ¹³C-¹³C dipolar recoupling solid-state NMR measurements to reveal the configuration of backbone amide bonds selected by ¹³C isotopic labeling of adjacent α-carbons. Measurements on the same molecules in the amorphous state and in nanosheets revealed that amide bonds in the center of the amino block of peptoid (NaeNpe)₇-(NceNpe)₇ (B28) favor the trans configuration in the amorphous state and the cis configuration in the nanosheet. This unexpected result contrasts with previous NMR and theoretical studies of short solvated peptoids. Furthermore, examination of the amide bond at the junction of the two charged blocks within B28 revealed a mixture of both cis and trans configurational states, consistent with the previously predicted brickwork-like intermolecular organization.

Solid-State NMR Structural Characterization of Self-Assembled Peptides with Selective 13C and 15N Isotopic Labels

For the structural characterization methods discussed here, information on molecular conformation and intermolecular organization within nanostructured peptide assemblies is discerned through analysis of solid-state NMR spectral features. This chapter reviews general NMR methodologies, requirements for sample preparation, and specific descriptions of key experiments. An attempt is made to explain choices of solid-state NMR experiments and interpretation of results in a way that is approachable to a nonspecialist. Measurements are designed to determine precise NMR peak positions and line widths, which are correlated with secondary structures, and probe nuclear spin-spin interactions that report on three-dimensional organization of atoms. The formulation of molecular structural models requires rationalization of data sets obtained from multiple NMR experiments on samples with carefully chosen 13C and 15N isotopic labels. The information content of solid-state NMR data has been illustrated mostly through the use of simulated data sets and references to recent structural work on amyloid fibril-forming peptides and designer self-assembling peptides.

Insights into protein misfolding and aggregation enabled by solid-state NMR spectroscopy

The aggregation of proteins and peptides into a variety of insoluble, and often non-native, aggregated states plays a central role in many devastating diseases. Analogous processes undermine the efficacy of polypeptide-based biological pharmaceuticals, but are also being leveraged in the design of biologically inspired self-assembling materials. This Trends article surveys the essential contributions made by recent solid-state NMR (ssNMR) studies to our understanding of the structural features of polypeptide aggregates, and how such findings are informing our thinking about the molecular mechanisms of misfolding and aggregation. A central focus is on disease-related amyloid fibrils and oligomers involved in neurodegenerative diseases such as Alzheimer's, Parkinson's and Huntington's disease. SSNMR-enabled structural and dynamics-based findings are surveyed, along with a number of resulting emerging themes that appear common to different amyloidogenic proteins, such as their compact alternating short-β-strand/β-arc amyloid core architecture. Concepts, methods, future prospects and challenges are discussed.

Structure of FUS Protein Fibrils and Its Relevance to Self-Assembly and Phase Separation of Low-Complexity Domains

Polymerization and phase separation of proteins containing low-complexity (LC) domains are important factors in gene expression, mRNA processing and trafficking, and localization of translation. We have used solid-state nuclear magnetic resonance methods to characterize the molecular structure of self-assembling fibrils formed by the LC domain of the fused in sarcoma (FUS) RNA-binding protein. From the 214-residue LC domain of FUS (FUS-LC), a segment of only 57 residues forms the fibril core, while other segments remain dynamically disordered. Unlike pathogenic amyloid fibrils, FUS-LC fibrils lack hydrophobic interactions within the core and are not polymorphic at the molecular structural level. Phosphorylation of core-forming residues by DNA-dependent protein kinase blocks binding of soluble FUS-LC to FUS-LC hydrogels and dissolves phase-separated, liquid-like FUS-LC droplets. These studies offer a structural basis for understanding LC domain self-assembly, phase separation, and regulation by post-translational modification.

Combining DNP NMR with segmental and specific labeling to study a yeast prion protein strain that is not parallel in-register

The yeast prion protein Sup35NM is a self-propagating amyloid. Despite intense study, there is no consensus on the organization of monomers within Sup35NM fibrils. Some studies point to a β-helical arrangement, whereas others suggest a parallel in-register organization. Intermolecular contacts are often determined by experiments that probe long-range heteronuclear contacts for fibrils templated from a 1:1 mixture of ¹³C- and ¹⁵N-labeled monomers. However, for Sup35NM, like many large proteins, chemical shift degeneracy limits the usefulness of this approach. Segmental and specific isotopic labeling reduce degeneracy, but experiments to measure long-range interactions are often too insensitive. To limit degeneracy and increase experimental sensitivity, we combined specific and segmental isotopic labeling schemes with dynamic nuclear polarization (DNP) NMR. Using this combination, we examined an amyloid form of Sup35NM that does not have a parallel in-register structure. The combination of a small number of specific labels with DNP NMR enables determination of architectural information about polymeric protein systems.

Molecular Structure of Aggregated Amyloid-β: Insights from Solid-State Nuclear Magnetic Resonance

Amyloid-β (Aβ) peptides aggregate to form polymorphic amyloid fibrils and a variety of intermediate assemblies, including oligomers and protofibrils, both in vitro and in human brain tissue. Since the beginning of the 21st century, considerable progress has been made to characterize the molecular structures of Aβ aggregates. Full molecular structural models based primarily on data from measurements using solid-state nuclear magnetic resonance (ssNMR) have been developed for several in vitro Aβ fibrils and one metastable protofibril. Partial structural characterization of other aggregation intermediates has been achieved. One full structural model for fibrils derived from brain tissue has also been reported. Future work is likely to focus on additional structures from brain tissue and on further clarification of nonfibrillar Aβ aggregates.

Measurement of homonuclear magnetic dipole-dipole interactions in multiple 1/2-spin systems using constant-time DQ-DRENAR NMR

A new pulse sequence entitled DQ-DRENAR (Double-Quantum based Dipolar Recoupling Effects Nuclear Alignment Reduction) was recently described for the quantitative measurement of magnetic dipole-dipole interactions in homonuclear spin-1/2 systems involving multiple nuclei. As described in the present manuscript, the efficiency and performance of this sequence can be significantly improved, if the measurement is done in the constant-time mode. We describe both the theoretical analysis of this method and its experimental validation of a number of crystalline model compounds, considering both symmetry-based and back-to-back (BABA) DQ-coherence excitation schemes. Based on the combination of theoretical analysis and experimental results we discuss the effect of experimental parameters such as the chemical shift anisotropy (CSA), the spinning rate, and the radio frequency field inhomogeneity upon its performance. Our results indicate that constant-time (CT-) DRENAR is a method of high efficiency and accuracy for compounds with multiple homonuclear spin systems with particular promise for the analysis of stronger-coupled and short T2 spin systems.

Molecular structure of monomorphic peptide fibrils within a kinetically trapped hydrogel network

Most, if not all, peptide- and protein-based hydrogels formed by self-assembly can be characterized as kinetically trapped 3D networks of fibrils. The propensity of disease-associated amyloid-forming peptides and proteins to assemble into polymorphic fibrils suggests that cross-β fibrils comprising hydrogels may also be polymorphic. We use solid-state NMR to determine the molecular and supramolecular structure of MAX1, a de novo designed gel-forming peptide, in its fibrillar state. We find that MAX1 adopts a β-hairpin conformation and self-assembles with high fidelity into a double-layered cross-β structure. Hairpins assemble with an in-register Syn orientation within each β-sheet layer and with an Anti orientation between layers. Surprisingly, although the MAX1 fibril network is kinetically trapped, solid-state NMR data show that fibrils within this network are monomorphic and most likely represent the thermodynamic ground state. Intermolecular interactions not available in alternative structural arrangements apparently dictate this monomorphic behavior.

Competition between Fibrillation and Induction of Vesicle Fusion for the Membrane-Associated 40-Residue β-Amyloid Peptides

Disruption of the cell membrane by the β-amyloid (Aβ) peptides has been considered as a main mechanism of Alzheimer's disease. The peptide-to-lipid molar ratio (P:L) varies over a broad range biologically. We report here that two of the previously observed Aβ evolution pathways, fibrillation and induction of vesicle fusion, compete with each other when P:L varies in model Aβ-liposome systems. Fibrillation is preferred at higher P:L values, and fusion is promoted at lower P:L values. Structural studies suggest that the same residues in Aβ may involve in both the initial fibrillation and membrane binding at the fusion sites.

Structural evolution and membrane interaction of the 40-residue β amyloid peptides: differences in the initial proximity between peptides and the membrane bilayer studied by solid-state nuclear magnetic resonance spectroscopy

Interactions between the β amyloid (Aβ) peptides and cellular membranes have severe consequences such as neuronal cell disruption and therefore may play important roles in Alzheimer's disease. Understanding the structural basis behind such interactions, however, is hindered by the complexity of the Aβ-membrane systems. In particular, because the Aβ peptides are partially incorporated in the membrane bilayer after enzymatic cleavage, there are multiple possibilities in terms of the initial proximity between the peptides and membranes. Structural studies using in vitro model systems with either externally added or preincorporated Aβ in membrane bilayers resulted in distinct evolution pathways. Previous work has shown that the externally added Aβ formed long and mature filaments, while preincorporated Aβ generated short and curvy fibrils. In this study, we perform detailed characterizations on the structural evolution and membrane interaction for these two pathways, using a combination of solid-state nuclear magnetic resonance spectroscopy and other techniques. For the externally added Aβ, we determined the residue-specific structural evolution during the fibrillation process. While the entire fibrillation process for the externally added Aβ was slow, the preincorporated Aβ generated Aβ-lipid complexes rapidly. Specific interactions between the lipids and peptides were observed, suggesting the colocalization of lipids and peptides within the complex. Formation of such a complex induced molecular-level changes in the lipid bilayer, which may serve as a possible mechanism of membrane disruption.

Locating folds of the in-register parallel β-sheet of the Sup35p prion domain infectious amyloid

The [PSI+] prion is a self-propagating amyloid of the translation termination factor, Sup35p, of Saccharomyces cerevisiae. The N-terminal 253 residues (NM) of this 685-residue protein normally function in regulating mRNA turnover but spontaneously form infectious amyloid in vitro. We converted the three Ile residues in Sup35NM to Leu and then replaced 16 single residues with Ile, one by one, and prepared Ile-1-(13)C amyloid of each mutant, seeding with amyloid formed by the reference sequence Sup35NM. Using solid-state NMR, we showed that 10 of the residues examined, including six between residues 30 and 90, showed the ∼0.5-nm distance between labels diagnostic of the in-register parallel amyloid architecture. The five scattered N domain residues with wider spacing may be in turns or loops; one is a control at the C terminus of M. All mutants, except Q56I, showed little or no [PSI+] transmission barrier from the reference sequence, suggesting that they could assume a similar amyloid architecture in vitro when seeded with filaments of reference sequence Sup35NM. Infection of yeast cells expressing the reference SUP35 gene sequence with amyloid of several mutants produced [PSI+] transfectants with similar efficiency as did reference sequence Sup35NM amyloid. Our work provides a stringent demonstration that the Sup35 prion domain has the folded in-register parallel β-sheet architecture and suggests common locations of the folds. This architecture naturally suggests a mechanism of inheritance of conformation, the central mystery of prions.

Parallel in-register intermolecular β-sheet architectures for prion-seeded prion protein (PrP) amyloids

Structures of the infectious form of prion protein (e.g. PrP(Sc) or PrP-Scrapie) remain poorly defined. The prevalent structural models of PrP(Sc) retain most of the native α-helices of the normal, noninfectious prion protein, cellular prion protein (PrP(C)), but evidence is accumulating that these helices are absent in PrP(Sc) amyloid. Moreover, recombinant PrP(C) can form amyloid fibrils in vitro that have parallel in-register intermolecular β-sheet architectures in the domains originally occupied by helices 2 and 3. Here, we provide solid-state NMR evidence that the latter is also true of initially prion-seeded recombinant PrP amyloids formed in the absence of denaturants. These results, in the context of a primarily β-sheet structure, led us to build detailed models of PrP amyloid based on parallel in-register architectures, fibrillar shapes and dimensions, and other available experimentally derived conformational constraints. Molecular dynamics simulations of PrP(90-231) octameric segments suggested that such linear fibrils, which are consistent with many features of PrP(Sc) fibrils, can have stable parallel in-register β-sheet cores. These simulations revealed that the C-terminal residues ∼124-227 more readily adopt stable tightly packed structures than the N-terminal residues ∼90-123 in the absence of cofactors. Variations in the placement of turns and loops that link the β-sheets could give rise to distinct prion strains capable of faithful template-driven propagation. Moreover, our modeling suggests that single PrP monomers can comprise the entire cross-section of fibrils that have previously been assumed to be pairs of laterally associated protofilaments. Together, these insights provide a new basis for deciphering mammalian prion structures.