A shock tube with a high-repetition-rate time-of-flight mass spectrometer for investigations of complex reaction systems

External standard calibration method for high-repetition-rate shock tube kinetic studies with synchrotron-based time-of-flight mass spectrometry

The signal levels observed from mass spectrometers coupled by molecular beam sampling to shock tubes are impacted by dynamic pressures in the spectrometer due to rapid pressure changes in the shock tube. Accounting for the impact of the pressure changes is essential if absolute concentrations of species are to be measured. Obtaining such a correction for spectrometers operated with vacuum ultra violet photoionization has been challenging. We present here a new external calibration method which uses VUV-photoionization of CO2 to develop time-dependent corrections to species concentration/time profiles from which kinetic data can be extracted. The experiments were performed with the ICARE-HRRST (high repetition rate shock tube) at the DESIRS beamline of synchrotron SOLEIL. The calibration experiments were performed at temperatures and pressures behind reflected shock waves of 1376 ± 12 K and 6.6 ± 0.1 bar, respectively. Pyrolytic experiments with two aromatic species, toluene (T5 = 1362 ± 22 K, P5 = 6.6 ± 0.2 bar) and ethylbenzene (T5 = 1327 ± 18 K, P5 = 6.7 ± 0.2 bar), are analyzed to test the method. Time dependent concentrations for molecular and radical species were corrected with the new method. The resulting signals were compared with chemical kinetic simulations using a recent mechanism for pyrolytic formation of polycyclic aromatic hydrocarbons. Excellent agreement was obtained between the experimental data and simulations, without adjustment of the model, demonstrating the validity of the external calibration method.

Initiation reactions in the high temperature decomposition of styrene

The thermal decomposition of styrene was investigated in a combined experimental, theory and modeling study with particular emphasis placed on the initial dissociation reactions. Two sets of shock tube/time-of-flight mass spectrometry (TOF-MS) experiments were performed to identify reaction products and their order of appearance. One set of experiments was conducted with a miniature high repetition rate shock tube at the Advanced Light Source at Lawrence Berkeley National Laboratory using synchrotron vacuum ultraviolet photoionization. The other set of experiments was performed in a diaphragmless shock tube (DFST) using electron impact ionization. The datasets span 1660–2260 K and 0.5–12 atm. The results show a marked transition from aromatic products at low temperatures to polyacetylenes, up to C₈H₂, at high temperatures. The TOF-MS experiments were complemented by DFST/LS (laser schlieren densitometry) experiments covering 1800–2250 K and 60–240 Torr. These were particularly sensitive to the initial dissociation reactions. These reactions were investigated theoretically and revealed the dissociation of styrene to be a complex multichannel process with strong pressure and temperature dependencies that were evaluated with multi-well master equation simulations. Simulations of the LS data with a mechanism developed in this work are in excellent agreement with the experimental data. From these simulations, rate coefficients for the dissociation of styrene were obtained that are in good agreement with the theoretical predictions. The simulation results also provide fair predictions of the temperature and pressure dependencies of the products observed in the TOF-MS studies. Prior experimental studies of styrene pyrolysis concluded that the main products were benzene and acetylene. In contrast, this study finds that the majority of styrene dissociates to create five styryl radical isomers. Of these, α-styryl accounts for about 50% with the other isomers consuming approximately 20%. It was also found that C–C bond scission to phenyl and vinyl radicals consumes up to 25% of styrene. Finally the dissociation of styrene to benzene and vinylidene accounts for roughly 5% of styrene consumption. Comments are made on the apparent differences between the results of this work and prior literature.

A combined theoretical and experimental study showing styrene primarily decomposes to styryl radicals + H.

A rapid compression machine coupled with time-resolved molecular beam mass spectrometry for gas-phase kinetics studies

Rapid compression machines (RCMs) are used to simulate a single stroke of an internal combustion engine. After a high-speed compression process, a high-pressure and low-to-intermediate temperature condition can be obtained, under which ignition processes are usually studied. With the help of different diagnostic methods, the detailed speciation information of the ignition process can be quantified. In this study, the molecular beam mass spectrometry (MBMS) diagnostic method was applied on an RCM to realize time-resolved concentration profile measurements. To realize the combination between RCM and MBMS, particle dampers were adopted to suppress the vibrations of the RCM, and a novel flexible interface was designed to maintain a high vacuum, which ensured the safe and effective operation of a high-repetition-rate time-of-flight mass spectrometer (HRR-TOF-MS). The detailed configuration of this diagnostic method is presented, and the data acquisition system and data analysis method are described. The arrangement was validated through the investigation of the well-studied decomposition of 1,3,5-trioxane at temperatures between 697 and 777 K at 10 bars. The measured concentration profiles of 1,3,5-trioxane and formaldehyde were in good agreement with previous experimental and theoretical calculation results. The experimental results showed that the newly developed RCM coupled with the HRR-TOF-MS has advantages in time-resolved speciation measurements at low-to-intermediate temperatures and high pressures, and it can be applied in low-temperature combustion chemical kinetics studies.

Combustion in the future: The importance of chemistry

Combustion involves chemical reactions that are often highly exothermic. Combustion systems utilize the energy of chemical compounds released during this reactive process for transportation, to generate electric power, or to provide heat for various applications. Chemistry and combustion are interlinked in several ways. The outcome of a combustion process in terms of its energy and material balance, regarding the delivery of useful work as well as the generation of harmful emissions, depends sensitively on the molecular nature of the respective fuel. The design of efficient, low-emission combustion processes in compliance with air quality and climate goals suggests a closer inspection of the molecular properties and reactions of conventional, bio-derived, and synthetic fuels. Information about flammability, reaction intensity, and potentially hazardous combustion by-products is important also for safety considerations. Moreover, some of the compounds that serve as fuels can assume important roles in chemical energy storage and conversion. Combustion processes can furthermore be used to synthesize materials with attractive properties. A systematic understanding of the combustion behavior thus demands chemical knowledge. Desirable information includes properties of the thermodynamic states before and after the combustion reactions and relevant details about the dynamic processes that occur during the reactive transformations from the fuel and oxidizer to the products under the given boundary conditions. Combustion systems can be described, tailored, and improved by taking chemical knowledge into account. Combining theory, experiment, model development, simulation, and a systematic analysis of uncertainties enables qualitative or even quantitative predictions for many combustion situations of practical relevance. This article can highlight only a few of the numerous investigations on chemical processes for combustion and combustion-related science and applications, with a main focus on gas-phase reaction systems. It attempts to provide a snapshot of recent progress and a guide to exciting opportunities that drive such research beyond fossil combustion.

Shock-tube study of the decomposition of octamethylcyclotetrasiloxane and hexamethylcyclotrisiloxane

Shock-tube experiments have been performed to investigate the thermal decomposition of octamethylcyclotetrasiloxane (D4, Si4O4C8H24) and hexamethylcyclotrisiloxane (D3, Si3O3C6H18) behind reflected shock waves by gas chromatography/mass spectrometry (GC/MS) and high-repetition-rate time-of-flight mass spectrometry (HRR-TOF-MS) in a temperature range of 1160–1600 K and a pressure range of 1.3–2.6 bar. The main observed stable products were methane (CH4), ethylene (C2H4), ethane (C2H6), acetylene (C2H2) and in the case of D4 pyrolysis, also D3 was measured as a product in high concentration. A kinetics sub-mechanism accounting for the D4 and D3 gas-phase chemistry was devised, which consists of 19 reactions and 15 Si-containing species. The D4/D3 submechanism was combined with the AramcoMech 2.0 (Li et al., Proc. Combust. Inst. 2017, 36, 403–411) to describe hydrocarbon chemistry. The unimolecular rate coefficients for D4 and D3 decomposition are represented by the Arrhenius expressions k total/D4(T) = 2.87 × 1013 exp(−273.2 kJ mol−1/RT) s−1 and k total/D3(T) = 9.19 × 1014 exp(−332.0 kJ mol−1/RT) s−1, respectively.

High-Temperature Unimolecular Decomposition of Diethyl Ether: Shock-Tube and Theory Studies

The unimolecular decomposition of diethyl ether (DEE; C₂H₅OC₂H₅) is considered to be initiated via a molecular elimination and a C-O and a C-C bond fission step: C₂H₅OC₂H₅ → C₂H₄ + C₂H₅OH (1), C₂H₅OC₂H₅ → C₂H₅ + C₂H₅O (2), and C₂H₅OC₂H₅ → CH₃ + C₂H₅OCH₂ (3). In this work, two shock-tube facilities were used to investigate these reactions via (a) time-resolved H-atom concentration measurements by H-ARAS (atomic resonance absorption spectrometry), (b) time-resolved DEE-concentration measurements by high repetition-rate time-of-flight mass spectrometry (HRR-TOF-MS), and (c) product-composition measurements via gas chromatography/MS (GC/MS) after quenching the test gas. The experiments were conducted at temperatures ranging from 1054 to 1505 K and at pressures between 1.2 and 2.5 bar. Initial DEE mole fractions between 0.4 and 9300 ppm were used to perform the kinetics experiments by H-ARAS (0.4 ppm), GC/MS (200-500 ppm), and HRR-TOF-MS (7850-9300 ppm). The rate constants, k_total (k_total = k₁ + k₂ + k₃) derived from the GC/MS and HRR-TOF-MS experiments agree well with each other and can be described by the Arrhenius expression, k_total(1054-1467 K; 1.3-2.5 bar) = 10^12.81±0.22 exp(-240.27 ± 5.11 kJ mol^-1/RT) s^-1. From the H-ARAS experiments, overall rate constants for the bond fission channels, k₂₊₃ = k₂ + k₃ have been extracted. The k₂₊₃ data can be well described by the Arrhenius equation, k₂₊₃(1299-1505 K; 1.3-2.5 bar) = 10^14.43±0.33 exp(-283.27 ± 8.78 kJ mol^-1/RT) s^-1. A master-equation analysis was performed using CCSD(T)/aug-cc-pvtz//B3LYP/aug-cc-pvtz and CASPT2/aug-cc-pvtz//B3LYP/aug-cc-pvtz molecular properties and energies for the three primary thermal decomposition processes in DEE. The derived experimental data is very well reproduced by the simulations with the mechanism of this work. With regard to the branching ratios between bond fissions and elimination channels, uncertainties remain.

Shock-tube study of the decomposition of tetramethylsilane using gas chromatography and high-repetition-rate time-of-flight mass spectrometry

The decomposition of tetramethylsilane was studied in shock-tube experiments in a temperature range of 1270–1580 K and pressures ranging from 1.5 to 2.3 bar behind reflected shock waves combining GC/MS and HRR-TOF-MS.

A single-pulse shock tube coupled with high-repetition-rate time-of-flight mass spectrometry and gas chromatography for high-temperature gas-phase kinetics studies

Shock tubes are frequently used to investigate the kinetics of chemical reactions in the gas phase at high temperatures. Conventionally, two complementary arrangements are used where either time-resolved intermediate species measurements are conducted after the initiation of the reaction or where the product composition is determined after rapid initiation and quenching of the reaction through gas-dynamic processes. This paper presents a facility that combines both approaches to determine comprehensive information. A single-pulse shock tube is combined with high-sensitivity gas chromatography/mass spectrometry for product composition and concentration measurement as well as high-repetition-rate time-of-flight mass spectrometry for time-dependent intermediate concentration determination with 10 μs time resolution. Both methods can be applied simultaneously. The arrangement is validated with investigations of the well-documented thermal unimolecular decomposition of cyclohexene towards ethylene and 1,3-butadiene at temperatures between 1000 and 1500 K and pressures ranging from 0.8 to 2.4 bars. The comparison shows that the experimental results for both detections are in very good agreement with each other and with literature data.

High-Temperature Experimental and Theoretical Study of the Unimolecular Dissociation of 1,3,5-Trioxane

Unimolecular dissociation of 1,3,5-trioxane was investigated experimentally and theoretically over a wide range of conditions. Experiments were performed behind reflected shock waves over the temperature range of 775-1082 K and pressures near 900 Torr using a high-repetition rate time of flight mass spectrometer (TOF-MS) coupled to a shock tube (ST). Reaction products were identified directly, and it was found that formaldehyde is the sole product of 1,3,5-trioxane dissociation. Reaction rate coefficients were extracted by the best fit to the experimentally measured concentration-time histories. Additionally, high-level quantum chemical and RRKM calculations were employed to study the falloff behavior of 1,3,5-trioxane dissociation. Molecular geometries and frequencies of all species were obtained at the B3LYP/cc-pVTZ, MP2/cc-pVTZ, and MP2/aug-cc-pVDZ levels of theory, whereas the single-point energies of the stationary points were calculated using coupled cluster with single and double excitations including the perturbative treatment of triple excitation (CCSD(T)) level of theory. It was found that the dissociation occurs via a concerted mechanism requiring an energy barrier of 48.3 kcal/mol to be overcome. The new experimental data and theoretical calculations serve as a validation and extension of kinetic data published earlier by other groups. Calculated values for the pressure limiting rate coefficient can be expressed as log10 k∞ (s(-1)) = [15.84 - (49.54 (kcal/mol)/2.3RT)] (500-1400 K).