Robust conductance of dumbbell molecular junctions with fullerene anchoring groups

Theoretical investigation of thermoelectric properties of methyl blue-based molecular junctions

Thermoelectric properties of a family of methyl blue-based molecular junctions were theoretically studied using a combination of density functional theory (DFT) methods, and quantum transport theory (QTT). Employing different numbers of amino groups not only proves itself as a powerful strategy for controlling the transport behaviour and lifting the transmission coefficient T(E) from 1.91 × 10-5 to 7.45 × 10-5 with increasing the amino groups from zero to four, but also it enhances the thermoelectric properties of these molecules, since it increases the Seebeck coefficient (S) from 106.8 to 202.4 μV K-1 and the electronic figure of merit (Z el T) has been raised from 0.15 to 0.35, making these molecules promising candidates for thermoelectric applications.

Thermoelectric Properties of Porphyrin Nano Rings: A Theoretical and Modelling Investigation

Propagation of De Broglie waves through nanomolecular junctions is greatly affected by molecular topology changes, which in turn plays a key role in determining the electronic and thermoelectric properties of source|molecule|drain junctions. The probing and realization of the constructive quantum interference (CQI) and a destructive quantum interference (DQI) are well established in this work. The critical role of quantum interference (QI) in governing and enhancing the transmission coefficient T(E), thermopower (S), power factor (P) and electronic figure of merit (ZelT) of porphyrin nanorings has been investigated using a combination of density functional theory (DFT) methods, a tight binding (Hückel) modelling (TBHM) and quantum transport theory (QTT). Remarkably, DQI not only dominates the asymmetric molecular pathways and lowering T(E), but also improves the thermoelectric properties.

Molecular Structure-(Thermo)electric Property Relationships in Single-Molecule Junctions and Comparisons with Single- and Multiple-Parameter Models

The most probable single-molecule conductance of each member of a series of 12 conjugated molecular wires, 6 of which contain either a ruthenium or platinum center centrally placed within the backbone, has been determined. The measurement of a small, positive Seebeck coefficient has established that transmission through these molecules takes place by tunneling through the tail of the HOMO resonance near the middle of the HOMO-LUMO gap in each case. Despite the general similarities in the molecular lengths and frontier-orbital compositions, experimental and computationally determined trends in molecular conductance values across this series cannot be satisfactorily explained in terms of commonly discussed "single-parameter" models of junction conductance. Rather, the trends in molecular conductance are better rationalized from consideration of the complete molecular junction, with conductance values well described by transport calculations carried out at the DFT level of theory, on the basis of the Landauer-Büttiker model.

Constructive Quantum Interference in Single-Molecule Benzodichalcogenophene Junctions

Heteroatom substitution into the cores of alternant, aromatic hydrocarbons containing only even-membered rings is attracting increasing interest as a method of tuning their electrical conductance. Here, the effect of heteroatom substitution into molecular cores of non-alternant hydrocarbons, containing odd-membered rings, is examined. Benzodichalcogenophene (BDC) compounds are rigid, planar π-conjugated structures, with molecular cores containing five-membered rings fused to a six-membered aryl ring. To probe the sensitivity or resilience of constructive quantum interference (CQI) in these non-bipartite molecular cores, two C₂ -symmetric molecules (I and II) and one asymmetric molecule (III) were investigated. I (II) contains S (O) heteroatoms in each of the five-membered rings, while III contains an S in one five-membered ring and an O in the other. Differences in their conductances arise primarily from the longer S-C and shorter O-C bond lengths compared with the C-C bond and the associated changes in their resonance integrals. Although the conductance of III is significantly lower than the conductances of the others, CQI was found to be resilient and persist in all molecules.

Charge transport in C60-based single-molecule junctions with graphene electrodes

We investigate charge transport in C₆₀-based single-molecule junctions with graphene electrodes employing a combination of density functional theory (DFT) electronic structure calculations and Landauer transport theory. In particular, the dependence of the transport properties on the conformation of the molecular bridge and the type of termination of the graphene electrodes is investigated. Furthermore, electron pathways through the junctions are analyzed using the theory of local currents. The results reveal, in agreement with previous experiments, a pronounced dependence of the transport properties on the bias polarity, which is rationalized in terms of the electronic structure of the molecule. It is also shown that the edge states of zigzag-terminated graphene induce additional transport channels, which dominate transport at low voltages. The importance of the edge states for transport depends profoundly on the interface geometry of the junctions.

Single-Molecule Conductance Studies of Organometallic Complexes Bearing 3-Thienyl Contacting Groups

The compounds and complexes 1,4-C6 H4 (C≡C-cyclo-3-C4 H3 S)2 (2), trans-[Pt(C≡C-cyclo-3-C4 H3 S)2 (PEt3 )2 ] (3), trans-[Ru(C≡C-cyclo-3-C4 H3 S)2 (dppe)2 ] (4; dppe=1,2-bis(diphenylphosphino)ethane) and trans-[Ru(C≡C-cyclo-3-C4 H3 S)2 {P(OEt)3 }4 ] (5) featuring the 3-thienyl moiety as a surface contacting group for gold electrodes have been prepared, crystallographically characterised in the case of 3-5 and studied in metal|molecule|metal junctions by using both scanning tunnelling microscope break-junction (STM-BJ) and STM-I(s) methods (measuring the tunnelling current (I) as a function of distance (s)). The compounds exhibit similar conductance profiles, with a low conductance feature being more readily identified by STM-I(s) methods, and a higher feature by the STM-BJ method. The lower conductance feature was further characterised by analysis using an unsupervised, automated multi-parameter vector classification (MPVC) of the conductance traces. The combination of similarly structured HOMOs and non-resonant tunnelling mechanism accounts for the remarkably similar conductance values across the chemically distinct members of the family 2-5.

Fingerprinting Electronic Molecular Complexes in Liquid

Predicting the electronic framework of an organic molecule under practical conditions is essential if the molecules are to be wired in a realistic circuit. This demands a clear description of the molecular energy levels and dynamics as it adapts to the feedback from its evolving chemical environment and the surface topology. Here, we address this issue by monitoring in real-time the structural stability and intrinsic molecular resonance states of fullerene (C60)-based hybrid molecules in the presence of the solvent. Energetic levels of C60 hybrids are resolved by in situ scanning tunnelling spectroscopy with an energy resolution in the order of 0.1 eV at room-temperature. An ultra-thin organic spacer layer serves to limit contact metal-molecule energy overlap. The measured molecular conductance gap spread is statistically benchmarked against first principles electronic structure calculations and used to quantify the diversity in electronic species within a standard population of molecules. These findings provide important progress towards understanding conduction mechanisms at a single-molecular level and in serving as useful guidelines for rational design of robust nanoscale devices based on functional organic molecules.

Single-molecule junctions with epitaxial graphene nanoelectrodes

On the way to ultraflat single-molecule junctions with transparent electrodes, we present a fabrication scheme based on epitaxial graphene nanoelectrodes. As a suitable molecule, we identified a molecular wire with fullerene anchor groups. With these two components, stable electrical characteristics could be recorded. Electrical measurements show that single-molecule junctions with graphene and with gold electrodes display a striking agreement. This motivated a hypothesis that the differential conductance spectra are rather insensitive to the electrode material. It is further corroborated by the assignment of asymmetries and spectral features to internal molecular degrees of freedom. The demonstrated open-access graphene electrodes and the electrode-insensitive molecules provide a model system that will allow for a thorough investigation of an individual single-molecule contact with additional probes.

Incorporating single molecules into electrical circuits. The role of the chemical anchoring group

Constructing electronic circuits containing singly wired molecules is at the frontier of electrical device miniaturisation. Understanding the behaviour of different anchoring groups is key to this goal because of their significant role in determining the properties of the junction.

Nanoelectrical analysis of single molecules and atomic-scale materials at the solid/liquid interface

Evaluating the built-in functionality of nanomaterials under practical conditions is central for their proposed integration as active components in next-generation electronics. Low-dimensional materials from single atoms to molecules have been consistently resolved and manipulated under ultrahigh vacuum at low temperatures. At room temperature, atomic-scale imaging has also been performed by probing materials at the solid/liquid interface. We exploit this electrical interface to develop a robust electronic decoupling platform that provides precise information on molecular energy levels recorded using in situ scanning tunnelling microscopy/spectroscopy with high spatial and energy resolution in a high-density liquid environment. Our experimental findings, supported by ab initio electronic structure calculations and atomic-scale molecular dynamics simulations, reveal direct mapping of single-molecule structure and resonance states at the solid/liquid interface. We further extend this approach to resolve the electronic structure of graphene monolayers at atomic length scales under standard room-temperature operating conditions.

Electron transport enhanced by electrode surface reconstruction: a case study of C60-based molecular junctions

At the C₆₀–Cu(111) interface, electrode surface reconstruction (Rec) increases electrical current compared to that for the unreconstructed (Unrec) surface.

A detailed experimental and theoretical study into the properties of C60 dumbbell junctions

A combined experimental and theoretical investigation is carried out into the electrical transport across a fullerene dumbbell one-molecule junction. The newly designed molecule comprises two C60 s connected to a fluorene backbone via cyclopropyl groups. It is wired between gold electrodes under ambient conditions by pressing the tip of a scanning tunnelling microscope (STM) onto one of the C60 groups. The STM allows us to identify a single molecule before the junction is formed through imaging, which means unambiguously that only one molecule is wired. Once lifted, the same molecule could be wired many times as it was strongly fixed to the tip, and a high conductance state close to 10(-2) G0 is found. The results also suggest that the relative conductance fluctuations are low as a result of the low mobility of the molecule. Theoretical analysis indicates that the molecule is connected directly to one electrode through the central fluorene, and that to bind it to the gold fully it has to be pushed through a layer of adsorbates naturally present in the experiment.