Charge transport in isoindigo-dithiophenepyrrole based D-A type oligomers: A DFT/TD-DFT study for the fabrication of fullerene-free organic solar cells

Heterojunction Organic Solar Cells with Efficient Charge Mobility and Separation Capabilities Studied by DFT

The properties of the active layer materials play a decisive role in determining the power conversion efficiency of organic solar cells (OSCs). Chlorophyll and its derivatives are abundant and environmentally friendly functional organic molecular materials. Using density functional theory (DFT) and time-dependent density functional theory (TD-DFT), we have calculated the absorption spectra and their excited state properties based on optimized ground state structures. It was found that bacteriochlorin exhibits superior structural properties, a smaller energy gap and hole reorganization energy, redshifted absorption spectra, and higher hole mobility compared to the donor D18. This suggests that bacteriochlorin exhibits superior donor properties. Comparative studies between o-AT-2Cl and m-AT-2Cl showed that o-AT-2Cl had superior acceptor properties, implying that differences in substitution positions can influence the physicochemical properties of non-fullerene acceptors (NFAs). Subsequently, six bulk heterojunctions (BHJs) were constructed by combining three donors with nonfused ring electron acceptors, o-AT-2Cl and m-AT-2Cl. The bacteriochlorin-based BHJs performed well among them, with BChl3/o-AT-2Cl and BChl4/o-AT-2Cl having the largest interfacial charge separation rate. The results suggested that BHJs composed of bacteriochlorin and NFAs can improve OSCs' photovoltaic performance, providing a feasible scheme for designing efficient OSCs.

Boosting the Performance of Diketopyrrolopyrrole-Triphenylamine-Based Organic Solar Cells via π-Linker Engineering

The design and development of novel and efficient donor-π-acceptor (D-π-A) type conjugated systems has attracted substantial interest in the field of organic electronics owing to their intriguing properties. In this paper, we have designed seven new and efficient D-π-A type conjugated systems (M1-M7) by a variety of π-linkers with triphenylamine (TPA) as the electron donor and diphenyldiketopyrrolopyrrole (DPP) as the electron acceptor using density functional theory (DFT) formalism for organic solar cells (OSCs). The π-linker has been substituted between the donor and acceptor for efficient electron transfer. Here, our primary focus is on narrowing the highest occupied molecular orbital-lowest unoccupied molecular orbital gaps, electronic transition, charge transfer rate, reorganization energies, and the theoretical power conversion efficiencies (PCEs). Our study reveals that the designed compounds exhibit excellent charge transfer rates. The absorption properties of the compounds have been examined using the time-dependent density functional theory (TD-DFT) method. The TD-DFT study shows that compound M2 possesses the highest absorption maxima with a maximum bathochromic shift. For a better understanding of the electron transport process of our designed compounds, we have designed donor/acceptor (D/A) blends, and each of the developed blends (FREA/M1-M7) can encourage charge carrier separation. According to the photovoltaic performance of the D/A blends, compound FREA-M2, which has a theoretical PCE of 16.53%, is the most appealing choice for use in OSCs. We expect that by thoroughly examining the relationship between structure, characteristics, and performance, this work will serve as a roadmap for future research and development of TPA-DPP-based photovoltaic materials.

Electronic structure and photophysical properties of some promising organic molecules for organic solar cells

CONTEXT

Three novel organic semiconductors (Fig. 1), which are molecule (a) and molecule (c) have the same wing unit molecules (b) and (c) have the same core unit were reported. Thus, the influence of wing units on solar cell device performance parameters such us the opto-electronics properties, non-linear optics (NLO), electronic properties, and natural bond orbitals (NBO) were calculated in order to evincing molecular structure-property relations. The all studied molecules would be promising materials for photovoltaic applications, but molecule (c) could be an excellent candidate for high efficiency organic solar cells with a small energy gap, a lowest ΔGreg, highest Voc, and LHE values. According to all these results, it is seen that the wing units of the molecules affect both the opto-electronic properties and NLO properties more than the core units. These theoretical calculations is expected to obtain new strategies to synthesize efficient materials for organic solar cell devices.

METHOD

Density functional (DFT) and time-dependent density functional (TDDFT) theory simulations for the solar cell device performance parameters, non-linear optics, and natural bond analysis were performed using the Gaussian 09w software. The ground state properties of molecules have been studied with hybrid functional of Beckethree-Lee-Yang-Parr (B3LYP), and excited state properties have been calculated CAMB3LYP and our DFT calculations were performed using 6-31++G(d,p) basis set on fully optimized geometries.

Computational Approaches for Organic Semiconductors: From Chemical and Physical Understanding to Predicting New Materials

While a complete understanding of organic semiconductor (OSC) design principles remains elusive, computational methods─ranging from techniques based in classical and quantum mechanics to more recent data-enabled models─can complement experimental observations and provide deep physicochemical insights into OSC structure-processing-property relationships, offering new capabilities for in silico OSC discovery and design. In this Review, we trace the evolution of these computational methods and their application to OSCs, beginning with early quantum-chemical methods to investigate resonance in benzene and building to recent machine-learning (ML) techniques and their application to ever more sophisticated OSC scientific and engineering challenges. Along the way, we highlight the limitations of the methods and how sophisticated physical and mathematical frameworks have been created to overcome those limitations. We illustrate applications of these methods to a range of specific challenges in OSCs derived from π-conjugated polymers and molecules, including predicting charge-carrier transport, modeling chain conformations and bulk morphology, estimating thermomechanical properties, and describing phonons and thermal transport, to name a few. Through these examples, we demonstrate how advances in computational methods accelerate the deployment of OSCsin wide-ranging technologies, such as organic photovoltaics (OPVs), organic light-emitting diodes (OLEDs), organic thermoelectrics, organic batteries, and organic (bio)sensors. We conclude by providing an outlook for the future development of computational techniques to discover and assess the properties of high-performing OSCs with greater accuracy.

Theoretical studies on donor-acceptor based macrocycles for organic solar cell applications

We have designed a series of new conjugated donor-acceptor-based macrocyclic molecules using state-of-the-art computational methods. An alternating array of donors and acceptor moieties in these macrocycle molecules are considered to tune the electronic and optical properties. The geometrical, electronic, and optical properties of newly designed macrocyclic molecules are fully explored using various DFT methods. Five conjugated macrocycles of different sizes are designed considering various donor and acceptor units. The selected donor and acceptors, viz., thiophene (PT), benzodithiophene (BDT), dithienobenzodithiophene (DTBDT), diketopyrrolopyrrole (DPP), and benzothiazole (BT), are frequently found in high performing conjugated polymer for different organic electronic applications. To fully assess the potential of these designed macrocyclic derivatives, analyses of frontier molecular orbital energies, excited state energies, energy difference between singlet-triplet states, exciton binding energies, rate constants related to charge transfer at the donor-acceptor interfaces, and electron mobilities have been carried out. We found significant structural and electronic properties changes between cyclic compounds and their linear counterparts. Overall, the cyclic conjugated D-A macrocycles' promising electronic and optical properties suggest that these molecules can be used to replace linear polymer molecules with cyclic conjugated oligomers.

Theoretical investigation of fused N-methyl-dithieno-pyrrole derivatives in the context of acceptor-donor-acceptor approach

In this work we have theoretically investigated the optoelectronic properties of a series of acceptor-donor-acceptor type molecules by employing density functional theory formalism. We have used 1,1-dicyano-methylene-3-indanone as the acceptor unit and a fused N-methyl-dithieno-pyrrole as the donor unit. We have calculated the values of dihedral angle, inter-ring bond length, bond length alteration parameters, HOMO-LUMO gap, ionization potential, electron affinity, partial density of states, reorganization energies for holes and electrons, charge transfer rate for holes and electrons of the seven types of compounds designed via molecular engineering. Calculated IP and EA values manifest that PBDB-C2 shows excellent charge transportation compared to others. Absorption spectra of the designed compounds have been studied using the time-dependent density functional theory method. From the calculation of reorganization energy it is confirmed that our designed molecules behave more likely as donor materials. Our calculated results also reveal that compounds with electron donating substituents at the acceptor units show higher value of λ max. Absorption spectra of donor/acceptor blends show similar trends with the isolated compounds. Observed lower exciton binding energy values for all the compounds indicate facile charge carrier separation at the donor/acceptor interface. Moreover, the negative values of Gibb's free energy change also indicate the ease of exciton dissociation of all the designed compounds. The photovoltaic characteristics of the studied compounds infer that all the designed compounds have the potential to become suitable candidate for the fabrication of organic semiconductors. However, PBDB-C2 and PBDB-C4 with the highest PCE of 18.25% can become the best candidate for application in photovoltaics.

Solvent effects on excited-state relaxation dynamics of paddle-wheel BODIPY-Hexaoxatriphenylene conjugates: Insights from non-adiabatic dynamics simulations

Understanding the excited state dynamics of donor-acceptor (D-A) complexes is of fundamental importance both experimentally and theoretically. Herein, we have first explored the photoinduced dynamics of a recently synthesized paddle-wheel BODIPY-hexaoxatriphenylene (BODIPY is the abbreviation for BF2-chelated dipyrromethenes) conjugates D-A complexes with the combination of both electronic structure calculations and non-adiabatic dynamics simulations. On the basis of computational results, we concluded that the BODIPY-hexaoxatriphenylene (BH) conjugates will be promoted to the local excited (LE) states of the BODIPY fragments upon excitation, which is followed by the ultrafast exciton transfer from LE state to charge transfer (CT). Instead of the photoinduced electron transfer process proposed in previous experimental work, such a exciton transfer process is accompanied with the photoinduced hole transfer from BODIPY to hexaoxatriphenylene. Additionally, solvent effects are found to play an important role in the photoinduced dynamics. Specifically, the hole transfer dynamics is accelerated by the acetonitrile solvent, which can be ascribed to significant influences of the solvents on the charge transfer states, i.e. the energy gaps between LE and CT excitons are reduced greatly and the non-adiabatic couplings are increased in the meantime. Our present work not only provides valuable insights into the underlying photoinduced mechanism of BH, but also can be helpful for the future design of novel donor-acceptor conjugates with better optoelectronic performance.

Correlation of solid-state order to optoelectronic behavior in heterocyclic oligomers

Here we address a longstanding challenge in the field of optoelectronic materials by evaluating the molecular and solid-state arrangements of heterocyclic oligomers and correlating their crystal structures to their optical properties.

Hopping transport in perylene diimide based organic solar cells: a DFT approach

In this paper, a series of donor–π–acceptor (D–π–A) type oligomers were investigated for their structural and electronic properties through density functional theory (DFT) and time dependent-DFT (TD-DFT) calculations.

Designing small organic non-fullerene acceptor molecules with diflorobenzene or quinoline core and dithiophene donor moiety through density functional theory

The non-fullerene acceptors A1-A5 with diflourobenzene or quinoline core (bridge) unit, donor cyclopenta[1,2-b:3,4-b']dithiophene unit and 2-(2-methylene-3-oxo-2,3-dihydro-1H-inden-1-ylidene)malononitrile as acceptor unit with additional phenyl, fulvene or thieno[3,2-d]pyrimidinyl 5-oxide groups have been designed through DFT calculations. The optimization of molecular geometries were performed with density functional theory (DFT) at B3LYP 6-31G (d,p) level of theory. The frontier molecular orbital (FMO) energies, band gap energies and dipole moments (ground and excited state) have been calculated to probe the photovoltaic properties. The band gap (1.42-2.01 eV) and dipole moment values (5.5-18. Debye) showed that these designed acceptors are good candidates for organic solar cells. Time-Dependent Density Functional Theory (TD-DFT) results showed λmax (wave length at maximum absorption) value (611-837 nm), oscillator strength (f) and excitation energies (1.50-2.02 eV) in gas phase and in CHCl3 solvent (1.48-1.89 eV) using integral equation formalism variant (IEFPCM) model. The λmax in CHCl3 showed marginal red shift for all designed acceptors compared with gas phase absorption. The partial density of states (PDOS) has been plotted by using multiwfn which showed that all the designed molecules have more electronic distribution at the donor moiety and lowest at the central bridge. The reorganization energies of electron (λe) (0.0007 eV to 0.017 eV), and the hole reorganization energy values (0.0003 eV to - 0.0403 eV) were smaller which suggested that higher charged motilities. The blends of acceptors A1-A5 with donor polymer D1 provided open circuit voltage (Voc) and ∆HOMO off-set of the HOMO of donor and acceptors. These blends showed 1.04 to 1.5 eV values of Voc and 0 to 0.38 eV ∆HOMO off set values of the donor-acceptor bends which indicate improved performance of the cell. Finally, the blend of D1-A4 was used for the study of distribution of HOMO and LUMO. The HOMO were found distributed on the donor polymer (D1) while the A4 acceptor was found with LUMO distribution. Based on λmax values, and band gap energies (Eg), excitation energies (Ex), reorganization energies; the A3 and A4 will prove good acceptor molecules for the development of organic solar cells.

Comparison of charge transport and opto-electronic properties of pyrene and anthracene derivatives for OLED applications

In this paper, three organic semiconductors such as 9-[(5-nitropyridin-2-aminoethyl)iminiomethyl]-anthracene (a), N'-((pyren-4-yl)methylene)isonicotinohydrazide (b), and novel organic semiconductor N-(2-((pyren-4-yl)methyleneamino)ethyl)-5-nitropyridin-2-amine (c) were prepared. Their structures were assessed using NMR and elemental analysis techniques. While compound (a) and compound (c) have the same wing unit ([(5-nitropyridin-2-aminoethyl) iminiomethyl]), compounds (b) and (c) have the same core unit (5-nitropyridin-2-amine). Based on TD-DFT and Marcus theories, we have explored the effects of molecular structure on the opto-electronic properties for OLED applications. Our results show that wing units of molecules impact more on the opto-electronics properties than on core units. The compounds (a) and (c) with the same wing unit have exhibited quite similar behaviors in terms of both structural and opto-electronic parameters. However, a similar situation has not been observed for compounds (b) and (c) with the same core unit. In conclusion, our results indicate that compounds (a) and (c) exhibit obvious advantages for OLEDs in terms of calculated opto-electronic and charge transport properties such as better absorption and emission parameters, lower energy gaps and reorganisation energies and higher charge mobility.

Structural modulation of phenothiazine and coumarin based derivatives for high performance dye sensitized solar cells: a theoretical study

A series of dyes with the D-π-A architecture has been designed and studied for dye sensitized solar cells (DSSCs). We have used phenothiazine (PTZ) and coumarin (COU) derivatives as the donor unit and benzopyrrole (BTZ) and 2-methyl-2H-isoindole-1,3-(3aH,7aH)-diene (IND) as the acceptor unit along with the azomethine group and thiophene ring as the π-spacer unit. Three electron donating groups viz. -CH3, -NH2, and -OH and four electron withdrawing groups viz. -CF3, -COCl, -F and -NO2 have been attached at the donor and the acceptor units respectively of the four unsubstituted dyes COU-BTZ, PTZ-BTZ, COU-IND and PTZ-IND. Density functional theory (DFT) and time-dependent density functional theory (TD-DFT) methods have been employed to investigate the structural, electronic and photochemical properties of these dyes. The study reveals that the unsubstituted dye PTZ-BTZ possesses the lowest value of ΔH-L. Our study also reveals that attachment of the -NO2 group at the acceptor unit lowers the ΔH-L values of all the dye molecules. We have observed that the excited state oxidation potential (ESOP) of all the dyes lies above the conduction band of the TiO2 semiconducting surface. However, the ground state oxidation potential (GSOP) of most of the dyes belonging to the COU-BTZ and COU-IND groups lies below the redox potential of the I-/I3- redox couple. The total reorganization energy (λtot) values of the COU-BTZ and COU-IND groups of dyes are observed to be low compared to the other groups of dyes. The study of the charge transport properties of the dyes confirms that the designed dyes will act as electron transport materials. The absorption properties of the dyes show that the COU-BTZ group of dyes possesses the maximum values of the absorption wavelength (λmax values) and attaching the -NO2 group at the acceptor unit shifts the λmax values of all the dyes to the longer region. From the study of the electronic properties of the dye-TiO2 complexes it has been observed that the performance of the dyes has been enhanced compared to the isolated dye molecules.

End-capped group manipulation of non-fullerene acceptors for efficient organic photovoltaic solar cells: a DFT study

A series of acceptors, S1-S5, has been designed based on the acceptor-π-donor-π-acceptor (A-π-D-π-A) architecture by incorporating a phenothiazine unit as the central donor unit. Density functional theory (DFT) and time-dependent density functional theory (TD-DFT) methods have been employed to study the effect of various end-capped groups on the geometric, electronic, optical and charge transport properties of the designed acceptor molecules. The results reveal that on increasing the electron-withdrawing nature of the end-capped groups, the performance of the acceptor molecules increases. It is also observed that on increasing the flexibility of the end-capped groups, the planarity of the molecules gets destroyed and, as a result, the performance of the acceptor molecules decreases. The investigated molecules exhibit high electron affinity (EA) and low reorganization energy for electrons (λ-), indicating the electron acceptor nature of the designed molecules. The absorption properties of the molecules manifest that compounds S2-S4 possess high values of the maximum wavelength (λmax) of absorption. We have also studied the properties of a D/A active layer by considering PffBT4T-2OD as the electron donor and arranging PffBT4T-2OD/S1-S5 molecules in a face to face manner. Properties of the D/A blend indicate that molecules S2-S4 have capacity to promote charge carrier separation at the D/A active layer. Our results provide guidelines for further designing of acceptors to enhance the performance of organic solar cells (OSCs).

Rational Design of Bay-Annulated Indigo (BAI)-Based Oligomers for Bulk Heterojunction Organic Solar Cells: A Density Functional Theory (DFT) Study

In this paper, we have designed a series of oligomers based on the donor-acceptor concept. Here, acceptor bay-annulated indigo (BAI) dye and donor N-methyl-4,5-diazacarbazole (DAC) are joined by a thiophene linkage. We have substituted the 5th and 5'th positions of the acceptor unit and the 2nd position of the donor unit with various electron-withdrawing and electron-donating groups to study various structural and electronic properties of the compounds. In this regard, we have calculated the dihedral angle, distortion energy, bond length alteration (BLA) parameters, bang gap (Δ _H - L ) values, partial density of states (PDOS), electrostatic potential (ESP) surface analysis, reorganization energy, charge transfer rates, hopping mobility values, and absorption spectra of the compounds. The ESP plots of the compounds indicate significant charge separation in the studied compounds. Our study manifests that the designed compounds are prone to facile charge transport.