High resolution time- and angle-resolved photoemission spectroscopy with 11 eV laser pulses

Time- and angle-resolved photoemission spectroscopy with wavelength-tunable pump and extreme ultraviolet probe enabled by twin synchronized amplifiers

We describe a setup for time- and angle-resolved photoemission spectroscopy with wavelength-tunable excitation and an extreme ultraviolet probe. It is enabled by using the 10 kHz twin Ti:sapphire amplifiers seeded by the common Ti:sapphire oscillator. The typical probe energy is 21.7 eV, and the wavelength of the pump excitation is tuned between 2400 and 1200 nm by using the optical parametric amplifier. The spectral width of the extreme ultraviolet probe is 53 meV, and the time resolution is dependent on the wavelength for the pump, better than 60 fs for the pump energy >0.7 eV. This system enables the pump energy to be matched with a specific interband transition and to probe a wider energy-momentum space. We present the results for the prototypical materials of highly oriented pyrolytic graphite and Bi2Se3 to show the performance of our system.

Coexistence of Interacting Charge Density Waves in a Layered Semiconductor

Coexisting orders are key features of strongly correlated materials and underlie many intriguing phenomena from unconventional superconductivity to topological orders. Here, we report the coexistence of two interacting charge-density-wave (CDW) orders in EuTe_{4}, a layered crystal that has drawn considerable attention owing to its anomalous thermal hysteresis and a semiconducting CDW state despite the absence of perfect Fermi surface nesting. By accessing unoccupied conduction bands with time- and angle-resolved photoemission measurements, we find that monolayers and bilayers of Te in the unit cell host different CDWs that are associated with distinct energy gaps. The two gaps display dichotomous evolutions following photoexcitation, where the larger bilayer CDW gap exhibits less renormalization and faster recovery. Surprisingly, the CDW in the Te monolayer displays an additional momentum-dependent gap renormalization that cannot be captured by density-functional theory calculations. This phenomenon is attributed to interlayer interactions between the two CDW orders, which account for the semiconducting nature of the equilibrium state. Our findings not only offer microscopic insights into the correlated ground state of EuTe_{4} but also provide a general nonequilibrium approach to understand coexisting, layer-dependent orders in a complex system.

A versatile laser-based apparatus for time-resolved ARPES with micro-scale spatial resolution

We present the development of a versatile apparatus for 6.2 eV laser-based time and angle-resolved photoemission spectroscopy with micrometer spatial resolution (time-resolved μ-ARPES). With a combination of tunable spatial resolution down to ∼11 μm, high energy resolution (∼11 meV), near-transform-limited temporal resolution (∼280 fs), and tunable 1.55 eV pump fluence up to 3 mJ/cm2, this time-resolved μ-ARPES system enables the measurement of ultrafast electron dynamics in exfoliated and inhomogeneous materials. We demonstrate the performance of our system by correlating the spectral broadening of the topological surface state of Bi2Se3 with the spatial dimension of the probe pulse, as well as resolving the spatial inhomogeneity contribution to the observed spectral broadening. Finally, after in situ exfoliation, we performed time-resolved μ-ARPES on a ∼30 μm flake of transition metal dichalcogenide WTe2, thus demonstrating the ability to access ultrafast electron dynamics with momentum resolution on micro-exfoliated materials.

High-resolution MHz time- and angle-resolved photoemission spectroscopy based on a tunable vacuum ultraviolet source

The time- and angle-resolved photoemission spectroscopy (trARPES) allows for direct mapping of the electronic band structure and its dynamic response on femtosecond timescales. Here, we present a new ARPES system, powered by a new fiber-based femtosecond light source in the vacuum ultraviolet range, accessing the complete first Brillouin zone for most materials. We present trARPES data on Au(111), polycrystalline Au, Bi2Se3, and TaTe2, demonstrating an energy resolution of 21 meV with a time resolution of <360 fs, at a high repetition rate of 1 MHz. The system is integrated with an extreme ultraviolet high harmonic generation beamline, enabling an excellent tunability of the time-bandwidth resolution.

Laser-based angle-resolved photoemission spectroscopy with micrometer spatial resolution and detection of three-dimensional spin vector

We have developed a state-of-the-art apparatus for laser-based spin- and angle-resolved photoemission spectroscopy with micrometer spatial resolution (µ-SARPES). This equipment is realized by the combination of a high-resolution photoelectron spectrometer, a 6 eV laser with high photon flux that is focused down to a few micrometers, a high-precision sample stage control system, and a double very-low-energy-electron-diffraction spin detector. The setup achieves an energy resolution of 1.5 (5.5) meV without (with) the spin detection mode, compatible with a spatial resolution better than 10 µm. This enables us to probe both spatially-resolved electronic structures and vector information of spin polarization in three dimensions. The performance of µ-SARPES apparatus is demonstrated by presenting ARPES and SARPES results from topological insulators and Au photolithography patterns on a Si (001) substrate.

High-flux wavelength tunable XUV source in the 12-40.8 eV photon energy range with adjustable energy and time resolution for Tr-ARPES applications

High-order harmonic generation (HHG) has a broad spectrum covering vacuum ultraviolet to extreme ultraviolet (XUV) bands, which is useful for applications involving material analyses at different information depths. Such an HHG light source is perfect for time- and angle-resolved photoemission spectroscopy. Here, we demonstrate a high-photon flux HHG source driven by a two-color field. Applying a fused silica compression stage to reduce the driving pulse width, we obtained a high XUV photon flux of 2 × 10¹² phs/s @21.6 eV on target. We designed a classical diffraction mounted (CDM) grating monochromator that can achieve a wide range of photon energy from 12 to 40.8 eV, while the time resolution is improved by reducing the pulse front tilt after the harmonic selection. We designed a spatial filtering method to adjust the time resolution using the CDM monochromator and significantly reduced the pulse front tilt of the XUV pulses. We also demonstrate a detailed prediction of the energy resolution broadening which is caused by the space charge effect.

A newly designed femtosecond KBe2BO3F2 device with pulse duration down to 55 fs for time- and angle-resolved photoemission spectroscopy

Developing a widely tunable vacuum ultraviolet (VUV) source with a sub-100 fs pulse duration is critical for ultrafast pump-probe techniques such as time- and angle-resolved photoemission spectroscopy (TrARPES). While a tunable probe source with a photon energy of 5.3-7.0 eV has been recently implemented for TrARPES by using a KBe₂BO₃F₂ (KBBF) device, the time resolution of 280-320 fs is still not ideal, which is mainly limited by the duration of the VUV probe pulse generated by the KBBF device. Here, by designing a new KBBF device, which is specially optimized for fs applications, an optimum pulse duration of 55 fs is obtained after systematic diagnostics and optimization. More importantly, a high time resolution of 81-95 fs is achieved for TrARPES measurements covering the probe photon energy range of 5.3-7.0 eV, making it particularly useful for investigating the ultrafast dynamics of quantum materials. Our work extends the application of the KBBF device to ultrafast pump-probe techniques with the advantages of both a widely tunable VUV source and ultimate time resolution.

Multispectral time-resolved energy-momentum microscopy using high-harmonic extreme ultraviolet radiation

A 790-nm-driven high-harmonic generation source with a repetition rate of 6 kHz is combined with a toroidal-grating monochromator and a high-detection-efficiency photoelectron time-of-flight momentum microscope to enable time- and momentum-resolved photoemission spectroscopy over a spectral range of 23.6-45.5 eV with sub-100 fs time resolution. Three-dimensional (3D) Fermi surface mapping is demonstrated on graphene-covered Ir(111) with energy and momentum resolutions of ≲100 meV and ≲0.1 Å^-1, respectively. The tabletop experiment sets the stage for measuring the k_z-dependent ultrafast dynamics of 3D electronic structure, including band structure, Fermi surface, and carrier dynamics in 3D materials as well as 3D orbital dynamics in molecular layers.

A narrow bandwidth extreme ultra-violet light source for time- and angle-resolved photoemission spectroscopy

Here, we present a high repetition rate, narrow bandwidth, extreme ultraviolet photon source for time- and angle-resolved photoemission spectroscopy. The narrow bandwidth pulses Δ E = 9 ,   14 ,   and   18  meV for photon energies h ν = 10.8 ,   18.1 ,   and   25.3  eV are generated through high harmonic generation using ultra-violet drive pulses with relatively long pulse lengths (461 fs). The high harmonic generation setup employs an annular drive beam in tight focusing geometry at a repetition rate of 250 kHz. Photon energy selection is provided by a series of selectable multilayer bandpass mirrors and thin film filters, thus avoiding any time broadening introduced by single grating monochromators. A two stage optical-parametric amplifier provides < 100 fs tunable pump pulses from 0.65 μm to 9 μm. The narrow bandwidth performance of the light source is demonstrated through angle-resolved photoemission measurements on a series of quantum materials, including high-temperature superconductor Bi-2212, WSe₂, and graphene.

Expanding the momentum field of view in angle-resolved photoemission systems with hemispherical analyzers

In photoelectron spectroscopy, the measured electron momentum range is intrinsically related to the excitation photon energy. Low photon energies <10 eV are commonly encountered in laser-based photoemission and lead to a momentum range that is smaller than the Brillouin zones of most materials. This can become a limiting factor when studying condensed matter with laser-based photoemission. An additional restriction is introduced by widely used hemispherical analyzers that record only electrons photoemitted in a solid angle set by the aperture size at the analyzer entrance. Here, we present an upgrade to increase the effective solid angle that is measured with a hemispherical analyzer. We achieve this by accelerating the photoelectrons toward the analyzer with an electric field that is generated by a bias voltage on the sample. Our experimental geometry is comparable to a parallel plate capacitor, and therefore, we approximate the electric field to be uniform along the photoelectron trajectory. With this assumption, we developed an analytic, parameter-free model that relates the measured angles to the electron momenta in the solid and verify its validity by comparing with experimental results on the charge density wave material TbTe₃. By providing a larger field of view in momentum space, our approach using a bias potential considerably expands the flexibility of laser-based photoemission setups.

Ultrafast extreme ultraviolet photoemission electron microscope

Here, we report our newly built table-top ultrafast extreme ultraviolet (EUV) photoemission electron microscope. The coherent ultrafast EUV light is served by a single order harmonic, which is generated by the interaction between the intense 800-nm femtosecond laser and noble gases in the hollow core fiber. The required order of the harmonic is selected out by a single grating in the off-plane mount and focused on the sample in the ultrahigh vacuum chamber of the photoemission electron microscope. Using metal gold and copper samples, the spatial resolution is calibrated to be better than 50 nm and the energy resolution is calibrated to be better than 300 meV. This microscope provides an advanced tool for studying electron dynamics covering the full Brillouin zone of solid materials with ultrahigh time, space, and energy resolution.