Plasmonic hot electrons for sensing, photodetection, and solar energy applications: A perspective

Boosting Electrochemiluminescence Performance of a Dual-Active Site Iron Single-Atom Catalyst-Based Luminol-Dissolved Oxygen System via Plasmon-Induced Hot Holes

Due to the commonly low content of biomarkers in diseases, increasing the sensitivity of electrochemiluminescence (ECL) systems is of great significance for in vitro ECL diagnosis and biodetection. Although dissolved O2 (DO) has recently been considered superior to H2O2 as a coreactant in the most widely used luminol ECL systems owing to its improved stability and less biotoxicity, it still has unsatisfactory ECL performance because of its ultralow reactivity. In this study, an effective plasmonic luminol-DO ECL system has been developed by complexing luminol-capped Ag nanoparticles (AgNPs) with plasma-treated Fe single-atom catalysts (Fe-SACs) embedded in graphitic carbon nitride (g-CN) (pFe-g-CN). Under optimal conditions, the performance of the resulting ECL system could be markedly increased up to 1300-fold compared to the traditional luminol-DO system. Further investigations revealed that duple binding sites of pFe-g-CN and plasmonically induced hot holes that disseminated from AgNPs to g-CN surfaces lead to facilitate significantly the luminous reaction process of the system. The proposed luminol-DO ECL system was further employed for the stable and ultrasensitive detection of prostate-specific antigen in a wide linear range of 1.0 fg/mL to 1 μg/mL, with a pretty low limit of detection of 0.183 fg/mL.

Hot carrier creation in a nanoparticle dimer-molecule composite

Light-matter interactions have garnered considerable interest owing to their burgeoning applications in quantum optics and plasmonics. Utilizing first principles calculations, this work explores the hot carrier (HC) generation and distribution within a composite system made up of a plasmonic nanoparticle dimer and linear polycyclic aromatic hydrocarbon (PAH) molecules. We examine the spatial and energetic distributions of HCs by initiating photoexcitation and allowing localized surface plasmon dephasing. By positioning PAH molecules within the plasmonic nanodimer's gap region, our investigation uncovers HC tuning. Notably, depending on the size of the PAH molecules, there are significant alterations in the HC distribution. Hot electrons (HEs) are distributed across both the nanodimer and the PAH molecule, while hot holes (HHs) become entirely localized on the PAH as the PAH grows larger. These findings improve our understanding of plasmon-molecule coupled states and provide guidance on how to customize HC distributions through the creation of hybrid plasmonic materials.

Plasmonic coupling-boosted photothermal composite photocatalyst for achieving near-infrared photocatalytic hydrogen production

The development of photocatalysts that effectively utilize low-energy photons for efficient photocatalysis still faces a number of challenges. Herein, an efficient NIR-driven system based on WO3-x/ZnIn2S4 (WO3-x/ZIS) prepared by a simple low-temperature water-bath method, and the optimal WO3-x/ZIS-3 composites can reach a hydrogen-production efficiency of 14.05 μmol g-1h-1 under NIR light irradiation. The localized surface plasmon (LSPR) resonance effect in WO3-x quantum dots (QDs) not only broadens the ZIS photo-response range, but also the photothermal effect of WO3-x can increase the local reaction temperature of WO3-x/ZIS composite system, thus enhancing the photothermal-assisted photocatalytic activity. In addition, density functional theory (DFT) calculations show that the difference in work function between WO3-x and ZIS can lead to the formation of interfacial electric field (IEF), which not only promotes the separation and migration efficiency of photogenerated carriers, but also facilitates the photocatalytic water splitting for hydrogen production. This study provides possible directions for the construction of NIR-driven photothermal-assisted photocatalytic hydrogen production system.

Plasmonic silver and gold nanoparticles: shape- and structure-modulated plasmonic functionality for point-of-caring sensing, bio-imaging and medical therapy

Silver and gold nanoparticles have found extensive biomedical applications due to their strong localized surface plasmon resonance (LSPR) and intriguing plasmonic properties. This review article focuses on the correlation among particle geometry, plasmon properties and biomedical applications. It discusses how particle shape and size are tailored via controllable synthetic approaches, and how plasmonic properties are tuned by particle shape and size, which are embodied by nanospheres, nanorods, nanocubes, nanocages, nanostars and core-shell composites. This article summarizes the design strategies for the use of silver and gold nanoparticles in plasmon-enhanced fluorescence, surface-enhanced Raman scattering (SERS), electroluminescence, and photoelectrochemistry. It especially discusses how to use plasmonic nanoparticles to construct optical probes including colorimetric, SERS and plasmonic fluorescence probes (labels/reporters). It also demonstrates the employment of Ag and Au nanoparticles in polymer- and paper-based microfluidic devices for point-of-care testing (POCT). In addition, this article highlights how to utilize plasmonic nanoparticles for in vitro and in vivo bio-imaging based on SERS, fluorescence, photoacoustic and dark-field models. Finally, this article shows perspectives in plasmon-enhanced photothermal and photodynamic therapy.

Enhancing Plasmonic Hot Electron Energy on Ag Surface by Amine Coordination

Plasmonic catalysis has emerged as a promising approach to solar-chemical energy conversion. Notably, hot carriers play a decisive role in plasmonic catalysis since only when their energy matches with the LUMO or HOMO energy of the reactant molecule, can the reaction be activated. However, the hot carrier energy depends on the intrinsic physicochemical properties of the plasmonic metal substrate and the interaction with incident light. Tuning the hot carrier energy is of great significance for plasmonic catalysis but remains challenging. Here, we demonstrate that the energy of hot electrons can be significantly elevated to an unprecedented level through the coordination of amines on Ag surface. The bonding of amines and Ag reduces the work function of nanoparticles, leading to the increase of hot electron energy by 0.4 eV. This enhancement of energy promotes the cleavage of C-X (X=Cl, F) bonds upon excitation by visible light. This study provides new insights for promoting plasmonic charge transfer and enhancing the photocatalytic performance of plasmon-mediated systems.

Metal Nanoparticles Assisted Ultrafast Laser Plasmonic Microwelding of Oxide-Semiconductor Interconnects

Integration of wafer-scale oxide and semiconductor materials meets the difficulties of residual stress and materials incompatibility. In this work, Ag NPs thin film is contributed as an energy confinement layer between oxide (Sapphire) and semiconductor (Si) wafers to localize the materials interaction during ultrafast laser irradiation. Due to the plasmonic effects generated within constructed dielectric-metal-dielectric structures (i.e., Sapphire-Ag-Si), thermal diffusion and chemical reaction between Ag and its neighboring materials facilitate the microwelding of Sapphire and Si wafers. Ag NPs can be totally sintered within the junction area to bridge oxide and semiconductor, while Al─O─Ag bond and Ag─Si bond are formed at Ag-Sapphire and Ag─Si interfaces, respectively. As-received heterogeneous joint exhibits a high shear strength up to 5.4 MPa, with the fracture occurring inside Si wafer. Meanwhile, insertion of metal nanolayer can greatly relieve the residual stress-induced microcracking inside the brittle materials. Such wafer-scale Sapphire and Si interconnects thus show robust strength and excellent impermeability even after thermal shocking (-40 °C to 120 °C) for 200 cycles. This metal NPs layer-assisted plasmonic microwelding technology can extend to broad materials integration, which is promising for high-performance microdevices development in MEMS, MOEMS, or microfluidics.

An elliptical nanoantenna array plasmonic metasurface for efficient solar energy harvesting

Plasmonic metasurfaces with subwavelength nanoantenna arrays have attracted much attention for their ability to control and manage optical properties. Solar absorbers are potential candidates for effectively converting photons into heat and electricity. This study introduces a novel ultrathin metasurface solar absorber employing elliptical-shaped nanoantenna arrays. We theoretically and numerically demonstrate a near-perfect broadband absorber with over 90% absorption efficiency in a wide range of wavelengths of 300-2500 nm, using finite element (FEM) and finite-difference time-domain (FDTD) methods. The proposed nanostructure configuration enhances light absorption by exciting localized surface plasmon resonances (LSPRs) between elliptical-shaped nanoantenna gaps at many wavelengths, maintaining stability at wide incident angles and insensitivity to light polarization. Compared to other state-of-the-art absorbers with a thickness of less than 300 nm, the designed nanostructure with 260 nm thickness achieves over 90% optical absorption across a broad range of wavelengths of 300-1116 nm in air (or vacuum) environments and performs effectively under water conditions for solar energy harvesting in a range of wavelengths of 300-1436 nm, and therefore can serve as a solar evaporator. Combining refractory plasmonic titanium nitride (TiN) and semiconductor gallium nitride (GaN) nanostructures holds great potential for efficient optoelectronic and photocatalytic applications, especially in harsh and high-temperature environments like thermophotovoltaic systems. The TiN-based metasurface absorber, with its ultrathin nanostructure and suitable spectral absorption in ultraviolet-visible-infrared spectra, offers scalability and cost-effectiveness. The findings in this work will deepen our understanding of LSPRs and pave a novel path for efficient solar energy conversion.

Dipole-multipole plasmonic coupling between gold nanorods and titanium nitride nanoparticles for enhanced photothermal conversion

The plasmonic photothermal conversion efficiency can be enhanced by coupling among plasmonic atoms or plasmonic molecules due to the amplified local electric field and extinction cross-section. Recently, it has been theoretically proved that hybridization between dipolar modes and higher order modes can provide higher enhancement than that among dipolar modes in terms of both near- and far-field, which may lead to a higher photothermal conversion rate. In this work, we systematically investigated the photothermal conversion enhancement of plasmonic coupling between a dipolar mode of a titanium nitride nanoparticle (TiN NP) and a higher order mode of a gold nanorod (Au NR), which was compared to that of coupling among TiN NPs' dipolar modes. We evaluated the photothermal conversion efficiency of dipole-dipole coupling and dipole-multipole coupling in the nanocluster under the illumination of a monochromatic laser of 808 nm wavelength and simulated solar light, respectively. Both experimental tests and numerical simulations suggested that the plasmonic dipole-multipole coupling exhibited higher enhancement in photothermal conversion than dipole-dipole plasmonic coupling.

A Mechanism Underpinning the Bioenergetic Metabolism-Regulating Function of Gold Nanocatalysts

Bioenergetic deficits are known to be significant contributors to neurodegenerative diseases. Nevertheless, identifying safe and effective means to address intracellular bioenergetic deficits remains a significant challenge. This work provides mechanistic insights into the energy metabolism-regulating function of colloidal Au nanocrystals, referred to as CNM-Au8, that are synthesized electrochemically in the absence of surface-capping organic ligands. When neurons are subjected to excitotoxic stressors or toxic peptides, treatment of neurons with CNM-Au8 results in dose-dependent neuronal survival and neurite network preservation across multiple neuronal subtypes. CNM-Au8 efficiently catalyzes the conversion of an energetic cofactor, nicotinamide adenine dinucleotide hydride (NADH), into its oxidized counterpart (NAD+ ), which promotes bioenergy production by regulating the intracellular level of adenosine triphosphate. Detailed kinetic measurements reveal that CNM-Au8-catalyzed NADH oxidation obeys Michaelis-Menten kinetics and exhibits pH-dependent kinetic profiles. Photoexcited charge carriers and photothermal effect, which result from optical excitations and decay of the plasmonic electron oscillations or the interband electronic transitions in CNM-Au8, are further harnessed as unique leverages to modulate reaction kinetics. As exemplified by this work, Au nanocrystals with deliberately tailored structures and surfactant-free clean surfaces hold great promise for developing next-generation therapeutic agents for neurodegenerative diseases.

Photoemission Enhancement of Plasmonic Hot Electrons by Au Antenna-Sensitizer Complexes

The photoemission of surface plasmon decay-produced hot electrons is usually of very low efficiencies, hindering the practical utilization of such nonequilibrium charge carriers in harvesting photons with less energy than the semiconductor band gap for more efficient solar energy collection and photodetection. However, it has been demonstrated that the photoemission efficiency of small metal clusters increases as the particle size decreases. Recent studies have also shown that the photoemission efficiency of surface plasmon-yielded hot carriers can be intrinsically improved through proper material construction. In this paper, we report that the photoemission efficiency of hot electrons on the Au nanodisk-cluster complex/TiO2 interface can be dramatically enhanced under optical nanoantenna-sensitizer design. Such an enhancement is dominantly attributed to three factors. First, the large plasmonic nanodisk antennas provide a significantly enhanced optical near field, which largely increases light absorption in the small Au clusters that are acting as hot electron injection sensitizers. Second, the sub-3 nm size of the Au clusters facilitates the collection of delocalized spreading charges by the semiconductor. Third, the hybrid interface and molecule-like energy level of the Au cluster result in a much longer lifetime of excited electrons. Our results provide a promising approach for the effective harvesting of solar energy with plasmonic antenna-sensitizer complexes.

Recent Studies on Metal-Embedded Silica Nanoparticles for Biological Applications

Recently, silica nanoparticles (NPs) have attracted considerable attention as biocompatible and stable templates for embedding noble metals. Noble-metal-embedded silica NPs utilize the exceptional optical properties of novel metals while overcoming the limitations of individual novel metal NPs. In addition, the structure of metal-embedded silica NPs decorated with small metal NPs around the silica core results in strong signal enhancement in localized surface plasmon resonance and surface-enhanced Raman scattering. This review summarizes recent studies on metal-embedded silica NPs, focusing on their unique designs and applications. The characteristics of the metal-embedded silica NPs depend on the type and structure of the embedded metals. Based on this progress, metal-embedded silica NPs are currently utilized in various spectroscopic applications, serving as nanozymes, detection and imaging probes, drug carriers, photothermal inducers, and bioactivation molecule screening identifiers. Owing to their versatile roles, metal-embedded silica NPs are expected to be applied in various fields, such as biology and medicine, in the future.

Dual-plasmonic Au@Cu7S4 yolk@shell nanocrystals for photocatalytic hydrogen production across visible to near infrared spectral region

Near infrared energy remains untapped toward the maneuvering of entire solar spectrum harvesting for fulfilling the nuts and bolts of solar hydrogen production. We report the use of Au@Cu7S4 yolk@shell nanocrystals as dual-plasmonic photocatalysts to achieve remarkable hydrogen production under visible and near infrared illumination. Ultrafast spectroscopic data reveal the prevalence of long-lived charge separation states for Au@Cu7S4 under both visible and near infrared excitation. Combined with the advantageous features of yolk@shell nanostructures, Au@Cu7S4 achieves a peak quantum yield of 9.4% at 500 nm and a record-breaking quantum yield of 7.3% at 2200 nm for hydrogen production in the absence of additional co-catalysts. The design of a sustainable visible- and near infrared-responsive photocatalytic system is expected to inspire further widespread applications in solar fuel generation. In this work, the feasibility of exploiting the localized surface plasmon resonance property of self-doped, nonstoichiometric semiconductor nanocrystals for the realization of wide-spectrum-driven photocatalysis is highlighted.

Optoelectronic Properties of Cold Plasma-Deposited, Oxidized Sn-C Thin Films

We report on investigating the structural and electronic properties of semiconducting and insulating layers produced in a process resembling percolation in a unique cold plasma fabrication method (plasma-enhanced chemical vapor deposition-PECVD). Amorphous carbon-tin films (Sn-C) produced from tetramethyl tin (TMT) with an acoustic-frequency glow discharge in a three-electrode reactor were investigated. The layers, after air exposure, oxidized to SnO2/Sn-C. Depending on the coupling capacitance applied to the plasma reactor, the films could be obtained in the form of an amorphous semiconductor or an amorphous insulator. We assume that the semiconductor consists of an internal network of channels auto-organized during deposition. The insulator does not demonstrate any internal structure features. An investigation on conductive filaments creating low-dimensional (LD) nanojunctions in the semiconductor and the location of energetic levels in the insulator was performed. The main parameters of the electronic band structure of the insulating film, such as the transport gap EG (5.2 eV), optical gap Eopt (3.1 eV), electron affinity Χ (2.1 eV), and ionization potential J (7.3 eV), were determined. We have demonstrated a simple approach for developing a catalyst candidate consisting of amorphous semiconductor-insulator nanojunctions for (photo)catalytic hydrogen evolution or CO2 reduction.

Impact of the unrelaxed vibrational modes on hot-electron transfer

The ultrafast photoinduced electron or exciton transfer was investigated theoretically. The charge separation on the ultrafast time scale results in the unrelaxed vibrational modes that appear in the initial terms of the generalized master equations. Here, the impact of these initial terms on the electron transfer directionality in the open system was evaluated. Moreover, the role of unrelaxed vibrational modes in electron-hole separation was also examined. It was shown that the unrelaxed vibrational modes significantly increase the efficiency of electron-hole separation. This could play a crucial role in the remarkable efficiency of charge separation in biological systems.

Exploring the potential of broadband Tamm plasmon resonance for enhanced photodetection

Tamm plasmon polaritons (TPPs) have emerged as a promising platform for photodetector applications due to their strong light-matter interaction and potential for efficient light absorption. In this work, a design for a broadband photodetector (PD) based on the optical Tamm plasmon (OTS) state generated in a periodic metal-semiconductor-distributed Bragg reflector (DBR) geometry is proposed. The transfer matrix method (TMM) was used to study the propagation of electromagnetic waves through the proposed structure. By exciting the structure with incident light and analyzing the electric field profile within the multilayer structure at the resonant wavelength, we observe a distinctive electric field distribution that indicates the presence of Tamm plasmon modes. A comparative study was conducted to investigate the optical properties of a photodetector in the near-infrared (NIR) range by varying parameters such as thickness. By optimizing the thickness, we successfully achieved a broadband photoresponse in the photodetector, with a maximum responsivity of 21.8 mA/W at a wavelength of 1354 nm, which falls within the photonic bandgap region. FWHM was found to be 590 nm for the responsivity spectrum. The geometry also presents maximum absorption with FWHM calculated to be about 871.5 nm. The proposed geometry offers a broadband photoresponse, which is advantageous for the advancement of Tamm-based detector technologies. The ability to detect light over a wide operation range makes this mechanism highly beneficial for various applications.

Negative Photoconductivity in 2D α-MoO3/Ir Self-Powered Photodetector: Impact of Post-Annealing

Surface plasmon technology is regarded as having significant potential for the enhancement of the performance of 2D oxide semiconductors, especially in terms of improving the light absorption of 2D MoO3 photodetectors. An ultrathin MoO3/Ir/SiO2/Si heterojunction Schottky self-powered photodetector is introduced here to showcase positive photoconductivity. In wafer-scale production, the initial un-annealed Mo/2 nm Ir/SiO2/Si sample displays a sheet carrier concentration of 5.76 × 1011/cm², which subsequently increases to 6.74 × 1012/cm² after annealing treatment, showing a negative photoconductivity behavior at a 0 V bias voltage. This suggests that annealing enhances the diffusion of Ir into the MoO3 layer, resulting in an increased phonon scattering probability and, consequently, an extension of the negative photoconductivity behavior. This underscores the significance of negative photoconductive devices in the realm of optoelectronic applications.

Theory of Hot-Carrier Generation in Bimetallic Plasmonic Catalysts

Bimetallic nanoreactors in which a plasmonic metal is used to funnel solar energy toward a catalytic metal have recently been studied experimentally, but a detailed theoretical understanding of these systems is lacking. Here, we present theoretical results of hot-carrier generation rates of different Au-Pd nanoarchitectures. In particular, we study spherical core-shell nanoparticles with a Au core and a Pd shell as well as antenna-reactor systems consisting of a large Au nanoparticle that acts as an antenna and a smaller Pd satellite nanoparticle separated by a gap. In addition, we investigate an antenna-reactor system in which the satellite is a core-shell nanoparticle. Hot-carrier generation rates are obtained from an atomistic quantum-mechanical modeling technique which combines a solution of Maxwell's equation with a tight-binding description of the nanoparticle electronic structure. We find that antenna-reactor systems exhibit significantly higher hot-carrier generation rates in the catalytic material than the core-shell system as a result of strong electric field enhancements associated with the gap between the antenna and the satellite. For these systems, we also study the dependence of the hot-carrier generation rate on the size of the gap, the radius of the antenna nanoparticle, and the direction of light polarization. Overall, we find a strong correlation between the calculated hot-carrier generation rates and the experimentally measured chemical activity for the different Au-Pd photocatalysts. Our insights pave the way toward a microscopic understanding of hot-carrier generation in heterogeneous nanostructures for photocatalysis and other energy-conversion applications.

Tautomeric mixture coordination enables efficient lead-free perovskite LEDs

Lead halide perovskite light-emitting diodes (PeLEDs) have demonstrated remarkable optoelectronic performance1-3. However, there are potential toxicity issues with lead4,5 and removing lead from the best-performing PeLEDs-without compromising their high external quantum efficiencies-remains a challenge. Here we report a tautomeric-mixture-coordination-induced electron localization strategy to stabilize the lead-free tin perovskite TEA2SnI4 (TEAI is 2-thiopheneethylammonium iodide) by incorporating cyanuric acid. We demonstrate that a crucial function of the coordination is to amplify the electronic effects, even for those Sn atoms that aren't strongly bonded with cyanuric acid owing to the formation of hydrogen-bonded tautomeric dimer and trimer superstructures on the perovskite surface. This electron localization weakens adverse effects from Anderson localization and improves ordering in the crystal structure of TEA2SnI4. These factors result in a two-orders-of-magnitude reduction in the non-radiative recombination capture coefficient and an approximately twofold enhancement in the exciton binding energy. Our lead-free PeLED has an external quantum efficiency of up to 20.29%, representing a performance comparable to that of state-of-the-art lead-containing PeLEDs6-12. We anticipate that these findings will provide insights into the stabilization of Sn(II) perovskites and further the development of lead-free perovskite applications.

Positive and Negative Photoconductivity in Ir Nanofilm-Coated MoO3 Bias-Switching Photodetector

In this study, we delved into the influence of Ir nanofilm coating thickness on the optical and optoelectronic behavior of ultrathin MoO3 wafer-scale devices. Notably, the 4 nm Ir coating showed a negative Hall voltage and high carrier concentration of 1.524 × 1019 cm-3 with 0.19 nm roughness. Using the Kubelka-Munk model, we found that the bandgap decreased with increasing Ir thickness, consistent with Urbach tail energy suggesting a lower level of disorder. Regarding transient photocurrent behavior, all samples exhibited high stability under both dark and UV conditions. We also observed a positive photoconductivity at bias voltages of >0.5 V, while at 0 V bias voltage, the samples displayed a negative photoconductivity behavior. This unique aspect allowed us to explore self-powered negative photodetectors, showcasing fast response and recovery times of 0.36/0.42 s at 0 V. The intriguing negative photoresponse that we observed is linked to hole self-trapping/charge exciton and Joule heating effects.

Plasmonic Nanostructure Engineering with Shadow Growth

Physical shadow growth is a vacuum deposition technique that permits a wide variety of 3D-shaped nanoparticles and structures to be fabricated from a large library of materials. Recent advances in the control of the shadow effect at the nanoscale expand the scope of nanomaterials from spherical nanoparticles to complex 3D shaped hybrid nanoparticles and structures. In particular, plasmonically active nanomaterials can be engineered in their shape and material composition so that they exhibit unique physical and chemical properties. Here, the recent progress in the development of shadow growth techniques to realize hybrid plasmonic nanomaterials is discussed. The review describes how fabrication permits the material response to be engineered and highlights novel functions. Potential fields of application with a focus on photonic devices, biomedical, and chiral spectroscopic applications are discussed.

Design of a binary metal micron grating and its application in near-infrared hot-electron photodetectors

Metal plasmonic nano-gratings possess a high absorption ability and exhibit potential applications in sensing, hot-electron photodetection, metasurfaces, etc. However, the fabrication techniques of high-quality nano-gratings are challenging. In this article, a binary metal micron grating for near-infrared hot-electron photodetectors (HEPDs) is designed in which the surface plasmons are excited by high-diffraction-order modes. The high-diffraction-order micron grating can be fabricated by conventional lithography and has a significantly higher tolerance in the grating parameters than a nano-grating. The range of absorption greater than 70% is ∼3 times that of a nano-grating. Moreover, an interesting relationship between the resonant wavelength and the grating duty cycle is found. When the high-diffraction-order micron grating is applied in metal-insulator-metal HEPDs, a high zero-biased responsivity of 0.533 mA/W is achieved.

A Silicon Sub-Bandgap Near-Infrared Photodetector with High Detectivity Based on Textured Si/Au Nanoparticle Schottky Junctions Covered with Graphene Film

We present a straightforward approach to develop a high-detectivity silicon (Si) sub-bandgap near-infrared (NIR) photodetector (PD) based on textured Si/Au nanoparticle (NP) Schottky junctions coated with graphene film. This is a photovoltaic-type PD that operates at 0 V bias. The texturing of Si is to trap light for NIR absorption enhancement, and Schottky junctions facilitate sub-bandgap NIR absorption and internal photoemission. Both Au NPs and the texturing of Si were made in self-organized processes. Graphene offers additional pathways for hot electron transport and to increase photocurrent. Under 1319 nm illumination at room temperature, a responsivity of 3.9 mA/W and detectivity of 7.2 × 10¹⁰ cm × (Hz)^1/2/W were obtained. Additionally, at -60 °C, the detectivity increased to 1.5 × 10¹¹ cm × (Hz)^1/2/W, with the dark current density reduced and responsivity unchanged. The result of this work demonstrates a facile method to create high-performance Si sub-bandgap NIR PDs for promising applications at ambient temperatures.

Energy transfer and charge transfer between semiconducting nanocrystals and transition metal dichalcogenide monolayers

Nowadays, as a result of the emergence of low-dimensional hybrid structures, the scientific community is interested in their interfacial carrier dynamics, including charge transfer and energy transfer. By combining the potential of transition metal dichalcogenides (TMDs) and nanocrystals (NCs) with low-dimensional extension, hybrid structures of semiconducting nanoscale matter can lead to fascinating new technological scenarios. Their characteristics make them intriguing candidates for electronic and optoelectronic devices, like transistors or photodetectors, bringing with them challenges but also opportunities. Here, we will review recent research on the combined TMD/NC hybrid system with an emphasis on two major interaction mechanisms: energy transfer and charge transfer. With a focus on the quantum well nature in these hybrid semiconductors, we will briefly highlight state-of-the-art protocols for their structure formation and discuss the interaction mechanisms of energy versus charge transfer, before concluding with a perspective section that highlights novel types of interactions between NCs and TMDs.

In Operando Photoswitching of Cu Oxidation States in Cu-Based Plasmonic Heterogeneous Photocatalysis for Efficient H2 Evolution

Metal nanoparticles (NP) supported on TiO₂ are known to be efficient photocatalysts for solar-to-chemical energy conversion. While TiO₂ decorated with copper NPs has the potential to become an attractive system, the poor oxidative stability of Cu severely limits its applicability. In this work, we demonstrate that, when Cu NPs supported on TiO₂ nanobelts (NBs) are engaged in the photocatalytic generation of H₂ from water under light illumination, Cu is not only oxidized in CuO but also dissolved under the form of Cu⁺/Cu²⁺ ions, leading to a continuous reconstruction of nanoparticles via Ostwald ripening. By nanoencapsulating the CuO_x (Cu/CuO/Cu₂O) NPs by a few layers of carbon supported on TiO₂ (TC@C), Ostwald ripening can be suppressed. Simultaneously, the resulting CuO_x@C NPs are photoreduced under light illumination to generate Cu@C NPs. This photoswitching strategy allows the preparation of a Cu plasmonic photocatalyst with enhanced activity for H₂ production. Remarkably, the photocatalyst is even active when illuminated with visible light, indicating a clear plasmonic enhancement of photocatalytic activity from the surface plasmonic resonance (SPR) effect of Cu NPs. Three-dimensional electromagnetic wave-frequency domain (3D-EWFD) simulations were conducted to confirm the SPR enhancement. This advance bodes for the development of scalable multifunctional Cu-based plasmonic photocatalysts for solar energy transfer.

Injecting Electrons into CeO2 via Photoexcitation of Embedded Au Nanoparticles

The electron injection efficiency and the steady state absorptance at different photon energies for a composite system made of Au NPs embedded in a cerium oxide matrix are reported. Cerium oxide can be coupled with plasmonic nanoparticles (NPs) to improve its catalytic properties by visible-light absorption. The present work is a study of the ultrafast dynamics of excited states induced by ultraviolet and visible-light excitation in Au NPs combined with cerium oxide, aimed at understanding the excitation pathways. The data, obtained by femtosecond transient absorption spectroscopy, show that the excitation of localized surface plasmon resonances (LSPRs) in the Au NPs leads to an ultrafast injection of electrons into the empty 4f states of the surrounding cerium oxide. Within the first few picoseconds, the injected electrons couple with the lattice distortion forming a polaronic excited state, with similar properties to that formed after direct band gap excitation of the oxide. At sub-picosecond delay times, we observed relevant differences in the energetics and the time dynamics as compared to the case of band gap excitation of the oxide. Using different pump energies across the LSPR-related absorption band, the efficiency of the electron injection from the NPs into the oxide was found to be rather high, with a maximum above 30%. The injection efficiency has a different trend in energy as compared to the LSPR-related static optical absorptance, showing a significant decrease in low energies. This behavior is explained considering different deexcitation pathways with variable weight across the LSPR band. The results are important for the design of materials with high overall solar catalytic efficiency.

Elucidating the Origin of Plasmon-Generated Hot Holes in Water Oxidation

Plasmon-generated hot electrons in metal/oxide heterostructures have been used extensively for driving photochemistry. However, little is known about the origin of plasmon-generated hot holes in promoting photochemical reactions. Herein, we discover that, during the nonradiative plasmon decay, the interband excitation rather than the intraband excitation generates energetic hot holes that enable to drive the water oxidation at the Au/TiO₂ interface. Distinct from lukewarm holes via the intraband excitation that only remain on Au, hot holes from the interband excitation are found to be transferred from Au into TiO₂ and stabilized by surface oxygen atoms on TiO₂, making them available to oxidize adsorbed water molecules. Taken together, our studies provide spectroscopic evidence to clarify the photophysical process for exciting plasmon-generated hot holes, unravel their atomic-level accumulation sites to maintain the strong oxidizing power in metal/oxide heterostructures, and affirm their crucial functions in governing photocatalytic oxidation reactions.

A review on plasmonic-based heterojunction photocatalysts for degradation of organic pollutants in wastewater

Organic pollutants in wastewater are the biggest problem facing the world today due to population growth, rapid increase in industrialization, urbanization, and technological advancement. There have been numerous attempts to use conventional wastewater treatment techniques to address the issue of worldwide water contamination. However, conventional wastewater treatment has a number of shortcomings, including high operating costs, low efficiency, difficult preparation, fast recombination of charge carriers, generation of secondary waste, and limited light absorption. Therefore, plasmonic-based heterojunction photocatalysts have attracted much attention as a promising method to reduce organic pollutant problems in water due to their excellent efficiency, low operating cost, ease of fabrication, and environmental friendliness. In addition, plasmonic-based heterojunction photocatalysts contain a local surface plasmon resonance that enhances the performance of photocatalysts by improving light absorption and separation of photoexcited charge carriers. This review summarizes the major plasmonic effects in photocatalysts, including hot electron, local field effect, and photothermal effect, and explains the plasmonic-based heterojunction photocatalysts with five junction systems for the degradation of pollutants. Recent work on the development of plasmonic-based heterojunction photocatalysts for the degradation of various organic pollutants in wastewater is also discussed. Lastly, the conclusions and challenges are briefly described and the direction of future development of heterojunction photocatalysts with plasmonic materials is explored. This review could serve as a guide for the understanding, investigation, and construction of plasmonic-based heterojunction photocatalysts for various organic pollutants degradation.

GRAPHICAL ABSTRACT

Herein, the plasmonic effects in photocatalysts, such as hot electrons, local field effect, and photothermal effect, as well as the plasmonic-based heterojunction photocatalysts with five junction systems for the degradation of pollutants are explained. Recent work on plasmonic-based heterojunction photocatalysts for the degradation of various organic pollutants in wastewater such as dyes, pesticides, phenols, and antibiotics is discussed. Challenges and future developments are also described.

Periodic Distributions and Ultrafast Dynamics of Hot Electrons in Plasmonic Resonators

Understanding and managing hot electrons in metals are of fundamental and practical interest in plasmonic studies and applications. A major challenge for the development of hot electron devices requires the efficient and controllable generation of long-lived hot electrons so that they can be harnessed effectively before relaxation. Here, we report the ultrafast spatiotemporal evolution of hot electrons in plasmonic resonators. Using femtosecond-resolution interferometric imaging, we show the unique periodic distributions of hot electrons due to standing plasmonic waves. In particular, this distribution can be flexibly tuned by the size, shape, and dimension of the resonator. We also demonstrate that the hot electron lifetimes are substantially prolonged at hot spots. This appealing effect is interpreted as a result of the locally concentrated energy density at the antinodes in standing hot electron waves. These results could be useful to control the distributions and lifetimes of hot electrons in plasmonic devices for targeted optoelectronic applications.

Active Site Engineering on Plasmonic Nanostructures for Efficient Photocatalysis

Plasmonic nanostructures have shown immense potential in photocatalysis because of their distinct photochemical properties associated with tunable photoresponses and strong light-matter interactions. The introduction of highly active sites is essential to fully exploit the potential of plasmonic nanostructures in photocatalysis, considering the inferior intrinsic activities of typical plasmonic metals. This review focuses on active site-engineered plasmonic nanostructures with enhanced photocatalytic performance, wherein the active sites are classified into four types (i.e., metallic sites, defect sites, ligand-grafted sites, and interface sites). The synergy between active sites and plasmonic nanostructures in photocatalysis is discussed in detail after briefly introducing the material synthesis and characterization methods. Active sites can promote the coupling of solar energy harvested by plasmonic metal to catalytic reactions in the form of local electromagnetic fields, hot carriers, and photothermal heating. Moreover, efficient energy coupling potentially regulates the reaction pathway by facilitating the excited state formation of reactants, changing the status of active sites, and creating additional active sites using photoexcited plasmonic metals. Afterward, the application of active site-engineered plasmonic nanostructures in emerging photocatalytic reactions is summarized. Finally, a summary and perspective of the existing challenges and future opportunities are presented. This review aims to deliver some insights into plasmonic photocatalysis from the perspective of active sites, expediting the discovery of high-performance plasmonic photocatalysts.

Sub-bandgap near-infrared photovoltaic response in Au/Al2O3/n-Si metal-insulator-semiconductor structure by plasmon-enhanced internal photoemission

Silicon sub-bandgap near-infrared (NIR) (λ > 1100 nm) photovoltaic (PV) response by plasmon-enhanced internal photoemission was investigated. The Si sub-bandgap NIR PV response, which remains unexploited in Schottky junction-like solar cell device, was examined using nanometer sized Au/Al₂O₃/n-Si junction arrays. This kind of metal-insulator-semiconductor structure was similar in functionality to Schottky junction in NIR absorption, photo-induced charge separation and collection. It showed that NIR absorption increased steadily with increasing volume of Au nanoparticles (NPs) till a saturation was reached. Simulation results indicated the formation of localized surface plasmon on the surfaces of Au NPs, which was correlated well with the observed NIR absorption. On the other hand, the NIR PV response was found sensitive to the amount and size of Au NPs and thickness of Al₂O₃. Chemical and field-effect passivation of n-Si by using Al₂O₃ and SiO₂ were used to optimize the NIR PV response. In the current configuration, the best PV conversion efficiency was 0.034% at λ = 1319 nm under illumination power of 0.1 W/cm².

The Quest for Green Solvents for the Sustainable Production of Nanosheets of Two-Dimensional (2D) Materials, a Key Issue in the Roadmap for the Ecology Transition in the Flatland

The recent advent of two-dimensional (2D) materials has had a ground-breaking impact on science and technology. To exploit in technology their unique thickness-dependent physicochemical properties, the large-scale production of 2D materials is mandatory, but it represents an open challenge still due to various pitfalls and severe limitations including the toxicity of state-of-the-art solvents. Thus, liquid-phase exfoliation based on green and bioderived solvents represents an ideal methodology for massive production. This is particularly crucial for introducing 2D materials in technological applications such as the production of drinking water and agri-food industrial processes. Here, we assessed the production of 2D nanosheets (specifically, graphene, WS₂, MoS₂) with liquid-phase exfoliation assisted by eco-friendly solvents, with a comparative evaluation of green solvents in terms of the yield and, moreover, the aspect ratio, defectivity, and crystalline quality of the produced nanosheets. In particular, we focus on the most promising green solvents in terms of the yield and the crystalline quality of the produced nanosheets: Polarclean, Iris, and Cyrene, which were compared with acetone/water mixtures, isopropyl alcohol (IPA), triethanolamine (TEA), aqueous solutions of urea, and an ethanol/water mixture as well as two toxic solvents largely used for the production of 2D nanosheets: N-methyl-2-pyrrolidone (NMP) and N, N-dimethylformamide (DMF). Remarkably, the density of defects was particularly low in the liquid-phase exfoliation with Polarclean, as indicated by the Raman spectrum of graphene, with the I(D)/I(G) ratio below 0.1. Furthermore, Polarclean and Iris also enable ink-jet printing with functional inks of 2D materials based on green solvents due to their low dynamic viscosity at room temperature.

Directional Scattering Switching from an All-Dielectric Phase Change Metasurface

All-dielectric metasurfaces are a blooming field with a wide range of new applications spanning from enhanced imaging to structural color, holography, planar sensors, and directionality scattering. These devices are nanopatterned structures of sub-wavelength dimensions whose optical behavior (absorption, reflection, and transmission) is determined by the dielectric composition, dimensions, and environment. However, the functionality of these metasurfaces is fixed at the fabrication step by the geometry and optical properties of the dielectric materials, limiting their potential as active reconfigurable devices. Herein, a reconfigurable all-dielectric metasurface based on two high refractive index (HRI) materials like silicon (Si) and the phase-change chalcogenide antimony triselenide (Sb₂Se₃) for the control of scattered light is proposed. It consists of a 2D array of Si-Sb₂Se₃-Si sandwich disks embedded in a SiO₂ matrix. The tunability of the device is provided through the amorphous-to-crystalline transition of Sb₂Se₃. We demonstrate that in the Sb₂Se₃ amorphous state, all the light can be transmitted, as it is verified using the zero-backward condition, while in the crystalline phase most of the light is reflected due to a resonance whose origin is the contribution of the electric (ED) and magnetic (MD) dipoles and the anapole (AP) of the nanodisks. By this configuration, a contrast in transmission (ΔT) of 0.81 at a wavelength of 980 nm by governing the phase of Sb₂Se₃ can be achieved.

Multi-temperature modeling of femtosecond laser pulse on metallic nanoparticles accounting for the temperature dependences of the parameters

This review considers the fundamental dynamical processes of metal nanoparticles during and after the impact of a femtosecond laser pulse on a nanoparticle, including the absorption of photons. Understanding the sequence of events after photon absorption and their timescales is important for many applications of nanoparticles. Various processes are discussed, starting with optical absorption by electrons, proceeding through the relaxation of the electrons due to electron–electron scattering and electron–phonon coupling, and ending with the dissipation of the nanoparticle energy into the environment. The goal is to consider the timescales, values, and temperature dependences of the electron heat capacity and the electron–phonon coupling parameter that describe these processes and how these dependences affect the electron energy relaxation. Two- and four-temperature models for describing electron–phonon relaxation are discussed. Significant emphasis is paid to the proposed analytical approach to modeling processes during the action of a femtosecond laser pulse on a metal nanoparticle. These consider the temperature dependences of the electron heat capacity and the electron–phonon coupling factor of the metal. The entire process is divided into four stages: (1) the heating of the electron system by a pulse, (2) electron thermalization, (3) electron–phonon energy exchange and the equalization of the temperature of the electrons with the lattice, and (4) cooling of the nanoparticle. There is an appropriate analytical description of each stage. The four-temperature model can estimate the parameters of the laser and nanoparticles needed for applications of femtosecond laser pulses and nanoparticles.

Efficient Hot Electron Capture in CuPc/MoSe2 Heterostructure Assisted by Intersystem Crossing

Efficient hot electron extraction is a promising approach to develop photovoltaic devices that exceed the Shockley-Queisser limit. However, experimental evidence of hot electron harvesting employing an organic-inorganic interface is still elusive. Here, we reveal the hot electron dynamics at a CuPc/MoSe₂ interface using steady-state spectroscopy and transient absorption spectroscopy. A hot electron transfer efficiency of greater than 78% from MoSe₂ to CuPc is observed, comparable to that achieved in quantum dot hybrid systems. The mechanism is proposed as follows: the photogenerated hot electrons in MoSe₂ transfer to CuPc and form singlet charge transfer states, which subsequently transform into triplet charge transfer states assisted by the rapid intersystem crossing, inhibiting back-donation of electrons and facilitating exciton dissociation into CuPc polarons with a nanosecond lifetime. Our results demonstrate that the intersystem crossing of the hybrid electronic state at organic-inorganic interfaces may serve as a scheme to enable efficient hot electron extraction in photovoltaic devices.

Optoelectronics of Atomic Metal-Semiconductor Interfaces in Tin-Intercalated MoS2

Metal-semiconductor interfaces are ubiquitous in modern electronics. These quantum-confined interfaces allow for the formation of atomically thin polarizable metals and feature rich optical and optoelectronic phenomena, including plasmon-induced hot-electron transfer from metal to semiconductors. Here, we report on the metal-semiconductor interface formed during the intercalation of zero-valent atomic layers of tin (Sn) between layers of MoS₂, a van der Waals layered material. We demonstrate that Sn interaction leads to the emergence of gap states within the MoS₂ band gap and to corresponding plasmonic features between 1 and 2 eV (0.6-1.2 μm). The observed stimulation of the photoconductivity, as well as the extension of the spectral response from the visible regime toward the mid-infrared suggests that hot-carrier generation and internal photoemission take place.

Dual functionality of surface plasmon resonance and barrier layer on the photosensing and optical nonlinearity of ZnO nanorod arrays

The dual functionality of plasmonic light harvesting and barrier spacing between Au nanoparticles (NPs) and ZnO nanorod arrays (NRsA) are spotlighted to investigate their impact on the photoconversion and optical nonlinearity in the present study. The passivating Al₂O₃ barrier layer permits high-energy hot electron tunneling and injection from Au to the ZnO NRsA. The structural, vibrational, morphological/elemental, and optical properties of ZnO NRsA/a-Al₂O₃/Au were characterized by X-ray diffraction (XRD), Raman scattering, field emission scanning electron microscopy/energy dispersive X-ray spectroscopy (FE-SEM/EDX), and ultraviolet-visible-near IR (UV-Vis-near IR) absorption, respectively. The optoelectronic and nonlinear optical properties were analyzed by current-voltage measurement and z-scan tests under red laser (655 nm) irradiation, respectively. To highlight the effect of surface plasmon charge transport-based photosensing and photo-harvesting, the irradiated light source is selected to have a photon energy lower than the ZnO bandgap energy and detuning from LSPR. The transfer of photo-induced hot electrons from the Au NPs localized surface plasmon resonance (LSPR) to the ZnO NRsA translates into photocurrent generation in photosensing performance. The reverse saturable absorption process is changed to saturable absorption after intercalating the Al₂O₃ spacing layer into the ZnO NRsA/Au interface. The typical values of the nonlinear refraction index and absorption coefficient are calculated as n₂ = +2.38 × 10^-5 cm² W^-1 and β = -0.17 cm W^-1 for the sandwiched ZnO NRsA/Al₂O₃/Au heterostructure, respectively. The sandwiched ZnO NRsA/amorphous Al₂O₃/Au heterostructure exhibits strong nonresonant optical nonlinearity, which has an excellent figure of merit for optical switching.

Bifunctional 2D/2D g-C3N4/BiO2-x nanosheets heterojunction for bacterial disinfection mechanisms under visible and near-infrared light irradiation

The efficient deployment of visible and near-infrared (NIR) light for photocatalytic disinfection is of great concern a matter. Herein, we report a specific bifunctional 2D/2D g-C₃N₄/BiO_2-x nanosheets heterojunction, prepared through a self-assembly approach. Delightfully, the obtained 2D/2D heterojunctions exhibited satisfactory photocatalytic disinfection performance towards Escherichia coli K-12 (E. coli K-12) under visible light irradiation, which was credited to the Z-scheme interfacial heterojunction facilitating the migration of photogenerated carries. The photoactivity enhancement driven by NIR light illumination was ascribed to the cooperative synergy effect of photothermal effect and "hot electrons", engineering efficient charge transfer. Intriguingly, the carboxyl groups emerged on g-C₃N₄ nanosheets contributed a vital role in establishing the enhanced photocatalytic reaction. Moreover, the disinfection mechanism was systematically described. The cell membrane was destroyed, evidenced by the generation of lipid peroxidation reaction and loss of energy metabolism. Subsequently, the damage of defense enzymes and release of intracellular constituents announced the irreversible death of E. coli K-12. Interestingly enough, considerable microbial community shifts of surface water were observed after visible and NIR light exposure, highlighting the critical feature of disinfection process in shaping microbial communities. The authors believe that this work gives a fresh light on the feasibility of heterostructures-enabled disinfection processes.

Ultrafast electron transfer at the interface of gold nanoparticles and methylene blue molecular adsorbates

Due to their unique property of possessing localized surface plasmon resonance (LSPR), metal nanoparticles (MNPs) have drastically impacted many applications. For instance, local field enhancement through LSPRs and plasmonic hot electron transfer are known to enhance the efficiency of MNP-based photoreactions. Here, we report on the ultrafast electron transfer from gold nanoparticles (Au-NPs) to methylene blue (MB) molecular adsorbate using femtosecond pump-probe and steady-state absorption and emission spectroscopy techniques. Although the energy band alignment of the interface allows both dipole-dipole Förster resonance energy transfer (FRET) and charge transfer, because the MB emission intensity at the Au-NPs/MB nanocomposite decreased by a factor of ∼3.6, the FRET process was ruled out. Selective excitation of LSPRs at the Au-NPs/MB nanocomposite sample in pump-probe experiments led to the formation of the MB ground-state depletion and a positive induced absorption at wavelengths shorter than ∼500 nm, which was attributed to the shoulder of the MB^- anion absorption. Furthermore, despite the fact that the concentration of Au-NPs in the nanocomposite sample is the same as that in the Au-NPs solution, the initial intensity of the LSPR depletion signal was about six times weaker than that in the Au-NPs sample. These observations suggest that electron transfer from excited Au-NPs to MB adsorbates took place on a time-scale that is shorter than the ∼50 fs experimental temporal resolution.

Engineering Plasmonic Environments for 2D Materials and 2D-Based Photodetectors

Two-dimensional layered materials are considered ideal platforms to study novel small-scale optoelectronic devices due to their unique electronic structures and fantastic physical properties. However, it is urgent to further improve the light–matter interaction in these materials because their light absorption efficiency is limited by the atomically thin thickness. One of the promising approaches is to engineer the plasmonic environment around 2D materials for modulating light–matter interaction in 2D materials. This method greatly benefits from the advances in the development of nanofabrication and out-plane van der Waals interaction of 2D materials. In this paper, we review a series of recent works on 2D materials integrated with plasmonic environments, including the plasmonic-enhanced photoluminescence quantum yield, strong coupling between plasmons and excitons, nonlinear optics in plasmonic nanocavities, manipulation of chiral optical signals in hybrid nanostructures, and the improvement of the performance of optoelectronic devices based on composite systems.

Electrochemical aspects of coinage metal nanoparticles for catalysis and spectroscopy

Down scaling bulk materials can cause colloidal systems to evolve into microscopically dispersed insoluble particles. Herein, we describe the interesting applications of coinage metal nanoparticles (MNPs) as colloid dispersions especially gold and silver. The rich plasmon bands of gold and silver in the visible range are elaborated using the plasmon resonance and redox potential values of grown metal microelectrode (GME). The gradation of their standard reduction potential values (E 0), as evaluated from the Gibbs free energy change for bulk metal, is ascribed to the variation in their size. Also, the effect of nucleophiles in the electrolytic cell with metal nanoparticles (MNPs) is described. The nucleophile-guided reduction potential value is considered, which is applicable even for bulk noble metals. Typically, a low value (as low as E 0 = +0.40 V) causes the oxidation of metals at the O2 (air)/H2O interface. Under this condition, the oxidation of noble metal particles and dissolution of the noble metal in water are demonstrated. Thus, metal dissolution as a function of the size of metal nanoparticles becomes eventful and demonstrable with the addition of a surfactant to the solution. Interestingly, the reversal of the nobility of gold (Au) and silver (Ag) microelectrodes at the water/electrode interface is confirmed from the evolution of normal and inverted 'core-shell' structures, exploiting visible spectrophotometry and surface-enhanced Raman scattering (SERS) analysis. Subsequently, the effect of the size, shape, and facet- and support-selective catalysis of gold nanoparticles (NPs) and the effect of incident photons on current conversion without an applied potential are briefly discussed. Finally, the synergistic effect of the emissive behaviour of gold and silver clusters is productively exploited.

Platinum nanoparticle sensitized plasmonic-enhanced broad spectral photodetection in large area vertical-aligned MoS2flakes

2D MoS₂holds immense potential for electronic and optoelectronic applications due to its unique characteristics. However, the atomic-scale thickness of MoS₂hinders the optical absorbance, thereby limiting its photodetection capability. Vertically-aligned MoS₂(VA-MoS₂) has an advantage of strong optical absorption and quick intra-layer transport, offering high speed operation. The coupling of plasmonic metal nanostructure with MoS₂can further enhance the light-matter interaction. Pt/Pd (as opposed to Ag/Au) are more promising to design next-generation nano-plasmonic devices due to their intense interband activity over a broad spectral range. Herein, we report Pt nanoparticle (NPs) enhanced broadband photoresponse in VA-MoS₂. The optical absorbance of MoS₂is enhanced after the integration of Pt NPs, with a four-fold enhancement in photocurrent. The formation of Schottky junction at Pt-MoS₂interface inhibits electron transmission, suppressing the dark current and substantially reducing NEP. The plasmonic-enabled photodetector shows enhanced responsivity (432 A W^-1, 800 nm) and detectivity (1.85 × 10¹⁴Jones, 5 V) with a low response time (87 ms/84 ms), attributed to faster carrier transport. Additionally, a theoretical approach is adopted to calculate wavelength-dependent responsivity, which matches well with experimental results. These findings offer a facile approach to modulate the performance of next-generation optoelectronic devices for practical applications.

Plasmonic CuxS Nanocages for Enhanced Solar Photothermal Cell Warming

Highly efficient plasmonic photothermal nanomaterials are benefitial to the successful resuscitation of cells. Copper sulfide (Cu_xS) is a type of plasmonic solar photothermal semiconductor material that expands the light collecting range by altering its localized surface plasmonic resonance (LSPR) to the near- to mid-infrared (IR) spectral region. Particularly, nanocages (or nanoshells) have hybridized plasmon resonances as the result of superpositioned nanospheres and nanocavities, which extend their receiving range for the solar spectrum and increase light-to-heat conversion rate. In this work, for the first time, we applied colloidal hollow Cu_xS nanocages to revive cryopreserved HeLa cells via photothermal warming, which showed improved cell warming rate and cell viability after cell resuscitation. Moreover, we tested the photothermal performance of Cu_xS nanocages with concentrated light illumination, which exhibited extraordinary photothermal performance due to localized and enhanced illumination. We further quantified each band's contribution during the cell warming process via evaluating the warming rate of cryopreserved cell solution with illumination by monochromatic UV, visible, and NIR lasers. We studied the biosafety and toxicity of Cu_xS nanocages by analyzing the generated copper ion residue during cell warming and cell incubation, respectively. Our study shows that Cu_xS nanocages have huge potential for cell warming and are promising for vast range of applications, such as nanomedicine, life science, biology, energy saving, etc.

Instantaneous Property Prediction and Inverse Design of Plasmonic Nanostructures Using Machine Learning: Current Applications and Future Directions

Advances in plasmonic materials and devices have given rise to a variety of applications in photocatalysis, microscopy, nanophotonics, and metastructures. With the advent of computing power and artificial neural networks, the characterization and design process of plasmonic nanostructures can be significantly accelerated using machine learning as opposed to conventional FDTD simulations. The machine learning (ML) based methods can not only perform with high accuracy and return optical spectra and optimal design parameters, but also maintain a stable high computing efficiency without being affected by the structural complexity. This work reviews the prominent ML methods involved in forward simulation and inverse design of plasmonic nanomaterials, such as Convolutional Neural Networks, Generative Adversarial Networks, Genetic Algorithms and Encoder–Decoder Networks. Moreover, we acknowledge the current limitations of ML methods in the context of plasmonics and provide perspectives on future research directions.

Au Polyhedron Array with Tunable Crystal Facets by PVP-Assisted Thermodynamic Control and Its Sharp Shape As Well As High-Energy Exposed Planes Co-Boosted SERS Activity

A route is developed for directly growing 2D Au polyhedron arrays with controllable exposed facets of polyhedron by utilizing the substrate-supported 2D Au quasi-spherical nanoparticle arrays as the Au seed arrays, which cannot be realized by traditional lithography. In the reaction system, polyvinyl pyrrolidone (PVP) plays a vital role in guiding the reduced Au atoms and stabilizing the substrate-supported Au seeds. More importantly, by thermodynamic control, PVP as a capping agent can further direct the formation of {111} facets. The key to guarantee the integrity and periodicity of array is a proper reduction of Au ions and low growth rate of crystal. Benefiting from the higher electric field intensity near the sharp vertexes and edges of Au polyhedra and the exposed {110} facets with high energy, the Au polyhedron array with {110} facets encasing polyhedron exhibits good, stable surface enhanced Raman scattering activity toward 4-aminothiophenol among the involved arrays. The proposed fabrication approach tremendously enriches the structural diversity of Au nanoarrays on substrates and greatly overcomes the shortcoming of traditional lithography.

Understanding the mechanism of plasmon-driven water splitting: hot electron injection and a near field enhancement effect

Utilizing plasmon-generated hot carriers to drive chemical reactions has currently become an active area of research in solar photocatalysis at the nanoscale. However, the mechanism underlying exact transfer and the generation dynamics of hot carriers, and the strategies used to further improve the quantum efficiency of the photocatalytic reaction still deserve further investigation. In this work, we perform a nonadiabatic excited-state dynamics study to depict the correlation between the reaction rate of plasmon-driven water splitting (PDWS) and the sizes of gold particles, the incident light frequency and intensity, and the near-field spatial distribution. Four model systems, H₂O and Au₂₀@H₂O separately interacting with the laser field and the near field generated by the Au nanoparticle (NP) with a few nanometers in size, have been investigated. Our simulated results clearly unveil the mechanism of PDWS and hot-electron injection in a Schottky-free junction: the electrons populated on the antibonding orbitals of H₂O are mandatory to drive the OH bond breaking and the strong orbital hybridization between Au₂₀ and H₂O creates the conditions for direct electron injection. We further find that the linear dependence of the reaction rate and the field amplitude only holds at a relatively weak field and it breaks down when the second OH bond begins to dissociate and field-induced water fragmentation occurs at a very intensive field, and that with the guarantee of electron injection, the water splitting rate increases with an increase in the NP size. This study will be helpful for further improving the efficiency of photochemical reactions involving plasmon-generated hot carriers and expanding the applications of hot carriers in a variety of chemical reactions.

Damage Induced to DNA and Its Constituents by 0-3 eV UV Photoelectrons†

The complex physical and chemical interactions between DNA and 0-3 eV electrons released by UV photoionization can lead to the formation of various lesions such as base modifications and cleavage, crosslinks and single strand breaks. Furthermore, in the presence of platinum chemotherapeutic agents, these electrons can cause clustered lesions, including double strand breaks. We explain the mechanisms responsible for these damages via the production 0-3 eV electrons by UVC radiation, and by UV photons of any wavelengths, when they are produced by photoemission from nanoparticles lying within about 10 nm from DNA. We review experimental evidence showing that a single 0-3 eV electron can produce these damages. The foreseen benefits UV-irradiation of nanoparticles targeted to the cell nucleus are mentioned in the context of cancer therapy, as well as the potential hazards to human health when they are present in cells.

Localized surface plasmon resonance for enhanced electrocatalysis

Electrocatalysis plays a vital role in energy conversion and storage in modern society. Localized surface plasmon resonance (LSPR) is a highly attractive approach to enhance the electrocatalytic activity and selectivity with solar energy. LSPR excitation can induce the transfer of hot electrons and holes, electromagnetic field enhancement, lattice heating, resonant energy transfer and scattering, in turn boosting a variety of electrocatalytic reactions. Although the LSPR-mediated electrocatalysis has been investigated, the underlying mechanism has not been well explained. Moreover, the efficiency is strongly dependent on the structure and composition of plasmonic metals. In this review, the currently proposed mechanisms for plasmon-mediated electrocatalysis are introduced and the preparation methods to design supported plasmonic nanostructures and related electrodes are summarized. In addition, we focus on the characterization strategies used for verifying and differentiating LSPR mechanisms involved at the electrochemical interface. Following that are highlights of representative examples of direct plasmonic metal-driven and indirect plasmon-enhanced electrocatalytic reactions. Finally, this review concludes with a discussion on the remaining challenges and future opportunities for coupling LSPR with electrocatalysis.