Modeling the cholesteric pitch of apolar cellulose nanocrystal suspensions using a chiral hard-bundle model

Macromolecular crowding in chiral assembly of ellipsoidal nanoparticles

Anisotropic colloidal particles have the ability to self-assemble into cholesteric structures. We used molecular dynamics to simulate the self-assembly of ellipsoidal particles with the objective to establish a general framework to reveal the primary factors driving chiral interactions. To characterize these interactions, we introduce a characteristic parameter following the crowding factor (CF) theory. Our simulations and statistical analysis showed good agreement with the CF theory; at the early stages of the assembly process, the ellipsoidal particles go through a critical aggregation point followed by further clustering toward nematic order. Furthermore, we demonstrate that under high CF conditions, small initial clusters may induce a chiral twist, which subsequently forms a cholesteric structure with no directional preference in higher organization states.

Structural Color from Cellulose Nanocrystals or Chitin Nanocrystals: Self-Assembly, Optics, and Applications

Widespread concerns over the impact of human activity on the environment have resulted in a desire to replace artificial functional materials with naturally derived alternatives. As such, polysaccharides are drawing increasing attention due to offering a renewable, biodegradable, and biocompatible feedstock for functional nanomaterials. In particular, nanocrystals of cellulose and chitin have emerged as versatile and sustainable building blocks for diverse applications, ranging from mechanical reinforcement to structural coloration. Much of this interest arises from the tendency of these colloidally stable nanoparticles to self-organize in water into a lyotropic cholesteric liquid crystal, which can be readily manipulated in terms of its periodicity, structure, and geometry. Importantly, this helicoidal ordering can be retained into the solid-state, offering an accessible route to complex nanostructured films, coatings, and particles. In this review, the process of forming iridescent, structurally colored films from suspensions of cellulose nanocrystals (CNCs) is summarized and the mechanisms underlying the chemical and physical phenomena at each stage in the process explored. Analogy is then drawn with chitin nanocrystals (ChNCs), allowing for key differences to be critically assessed and strategies toward structural coloration to be presented. Importantly, the progress toward translating this technology from academia to industry is summarized, with unresolved scientific and technical questions put forward as challenges to the community.

The effect of shape, polydispersity, charge, and fraction of crystallite bundles on the cholesteric pitch of cellulose nanocrystal suspensions

Using Onsager-Straley's second-virial theory, we investigate the cholesteric pitch of cellulose nanocrystal (CNC) suspensions. We model the CNCs as hard chiral bundles of microfibrils and examine the effect of the shape of these chiral bundles, characterized by aspect ratio and chirality, on the cholesteric pitch. Additionally, we explore the impact of length polydispersity and surface charge on the cholesteric phase of CNCs. Furthermore, we consider binary mixtures of twisted bundles and achiral primary crystallites to provide a more realistic representation of CNC suspensions. Our findings reveal that the degree of bundle twisting significantly affects the helical twisting of the cholesteric phase. We also observe that the average particle length and length polydispersity have substantial effects on strongly twisted bundles but minimal effects on weakly twisted ones. Finally, our study indicates that as the range of electrostatic interactions increases, the transfer of chirality from the microscopic to macroscopic length scales becomes masked, resulting in an increase in the cholesteric pitch. In the case of binary mixtures, the bundles act as chiral dopants, and an increasing fraction of bundles progressively enhances the helical twisting of the cholesteric phase.

Pre-Smectic Ordering and the Unwinding Helix in Monte Carlo Simulations of Cholesteric Liquid-Crystals

In this paper, molecular chirality is studied for liquid-crystal fluids represented by hard rods with the addition of an attractive chiral dispersion term. Chiral forces between molecular pairs are assumed to be long-ranged and are described in terms of the pseudotensor of Goossens [W. J. A. Goossens, Mol. Cryst. Liq. Cryst. 1971, 12, 237-244]. Following Varga and Jackson [S. Varga and G. Jackson, Chem. Phys. Lett. 2003, 377, 6-12], this is combined with a hard-spherocylinder core. We investigate the relationship between molecular chirality and the helical pitch of the system, which occurs in the absence of full three-dimensional periodic boundary conditions. The dependence of the wavenumber of this pitch on the thermodynamic variables, temperature, and density is measured. We also explore the use of a novel surface boundary interaction model. As a result of this approach, we are able to lower the temperature of the system without the occurrence of nematic droplets, which would interfere with the formation of a uniaxial pitch. Regarding the theoretical predictions of Wensink and Jackson [H. H. Wensink and G. Jackson, J. Chem. Phys. 2009, 130, 234911], on the one hand, we have qualitative agreement with the observed non-monotonic density dependence of the wavenumber. Initially increasing with density, the wavenumber reaches a maximum, before falling as the density moves toward the point of phase transition from cholesteric to smectic. However, further analysis for shorter rods, in the presence of novel boundary conditions, reveals some disagreement with the theory, at least in this case; the unwinding of the cholesteric helix in the cholesteric phase occurs simultaneously with subtle increases in smectic ordering. These pre-smectic fluctuations have not been accounted for so far in theories on cholesterics but turn out to play a key role in controlling the pitch of cholesteric phases of rod-shaped mesogens with a small to moderate aspect ratio.

Accelerating Cellulose Nanocrystal Assembly into Chiral Nanostructures

Cellulose nanocrystal (CNC) suspensions self-assembled into chiral nematic liquid crystals. This property has enabled the development of versatile optical materials with fascinating properties. Nevertheless, the scale-up production and commercial success of chiral nematic CNC superstructures face significant challenges. Fabrication of chiral nematic CNC nanostructures suffers from a ubiquitous pernicious trade-off between uniform chiral nematic structure and rapid self-assembly. Specifically, the chiral nematic assembly of CNCs is a time-consuming, spontaneous process that involves the organization of particles into ordered nanostructures as the solvent evaporates. This review is driven by the interest in accelerating chiral nematic CNC assembly and promoting a long-range oriented chiral nematic CNC superstructure. To start this review, the chirality origins of CNC and CNC aggregates are analyzed. This is followed by a summary of the recent advances in stimuli-accelerated chiral nematic CNC self-assembly procedures, including evaporation-induced self-assembly, continuous coating, vacuum-assisted self-assembly, and shear-induced CNC assembly under confinement. In particular, stimuli-induced unwinding, alignment, and relaxation of chiral nematic structures were highlighted, offering a significant link between the accelerated assembly approaches and uniform chiral nematic nanostructures. Ultimately, future opportunities and challenges for rapid chiral nematic CNC assembly are discussed for more innovative and exciting applications.

Flow and assembly of cellulose nanocrystals (CNC): A bottom-up perspective - A review

Cellulosic sources, such as lignocellulose-rich biomass, can be mechanically or acid degraded to produce inclusions called cellulose nanocrystals (CNCs). They have several uses in the sectors of biomedicine, photonics, and material engineering because of their biodegradability, renewability, sustainability, and mechanical qualities. The processing and design of CNC-based products are inextricably linked to the rheological behaviour of CNC suspension or in combination with other chemicals, such as surfactants or polymers; in this context, rheology offers a significant link between microstructure and macro scale flow behaviour that is intricately linked to material response in applications. The flow behaviour of CNC items must be properly specified in order to produce goods with value-added characteristics. In this review article, we provide new research on the shear rheology of CNC dispersion and CNC-based hydrogels in the linear and nonlinear regime, with storage modulus values reported to range from ~10^-3 to 10³ Pa. Applications in technology and material science are also covered simultaneously. We carefully examined the effects of charge density, aspect ratio, concentration, persistence length, alignment, liquid crystal formation, the cause of chirality in CNCs, interfacial behaviour and interfacial rheology, linear and nonlinear viscoelasticity of CNC suspension in bulk and at the interface using the currently available literature.

Cellulose: A Review of Water Interactions, Applications in Composites, and Water Treatment

Cellulose is known to interact well with water, but is insoluble in it. Many polysaccharides such as cellulose are known to have significant hydrogen bond networks joining the molecular chains, and yet they are recalcitrant to aqueous solvents. This review charts the interaction of cellulose with water but with emphasis on the formation of both natural and synthetic fiber composites. Covering studies concerning the interaction of water with wood, the biosynthesis of cellulose in the cell wall, to its dispersion in aqueous suspensions and ultimately in water filtration and fiber-based composite materials this review explores water-cellulose interactions and how they can be exploited for synthetic and natural composites. The suggestion that cellulose is amphiphilic is critically reviewed, with relevance to its processing. Building on this, progress made in using various charged and modified forms of nanocellulose to stabilize oil-water emulsions is addressed. The role of water in the aqueous formation of chiral nematic liquid crystals, and subsequently when dried into composite films is covered. The review will also address the use of cellulose as an aid to water filtration as one area where interactions can be used effectively to prosper human life.

Ground State Configurations and Metastable Phases of Charged Linear Rods

This computational study investigates the energy minimum, that is, ground state, of suspensions of monodisperse (single-component) charged linear rods at various densities and screening lengths. We find that closed-packed unidirectional configurations have the lowest energies for all studied cases. We further specify the lattice parameters for these crystalline structures. In addition, we identify a few metastable phases, including heliconical structures. These metastable heliconical phases are composed of hexagonal smectic C layers with particle orientations forming a conical helicoid with a short pitch of three layers. We evidence this by zero-temperature Monte Carlo simulations starting from an energy-minimized hexagonal cholesteric configuration, which rapidly transforms to a heliconical phase. Furthermore, this heliconical phase is remarkably stable even at finite temperatures and melts to a disordered phase at high temperatures. Finally, we conduct simulations at room temperature and conditions typical for cellulose nanocrystal suspensions to study the onset of nematic order and compare our results to available experimental data. Our findings suggest that electrostatics play an important role in the isotropic/anisotropic transition for dense suspensions of charged rods.

Revealing the Structural Coloration of Self-Assembled Chitin Nanocrystal Films

The structural coloration of arthropods often arises from helicoidal structures made primarily of chitin. Although it is possible to achieve analogous helicoidal architectures by exploiting the self-assembly of chitin nanocrystals (ChNCs), to date no evidence of structural coloration has been reported from such structures. Previous studies are identified to have been constrained by both the experimental inability to access sub-micrometer helicoidal pitches and the intrinsically low birefringence of crystalline chitin. To expand the range of accessible pitches, here, ChNCs are isolated from two phylogenetically distinct sources of α-chitin, namely fungi and shrimp, while to increase the birefringence, an in situ alkaline treatment is performed, increasing the intensity of the reflected color by nearly two orders of magnitude. By combining this treatment with precise control over ChNC suspension formulation, structurally colored chitin-based films are demonstrated with reflection tunable from blue to near infrared.

Bottom-Up Approach to Understand Chirality Transfer across Scales in Cellulose Assemblies

Cellulose is a polysaccharide that displays chirality across different scales, from the molecular to the supramolecular level. This feature has been exploited to generate chiral materials. To date, the mechanism of chirality transfer from the molecular level to higher-order assemblies has remained elusive, partially due to the heterogeneity of cellulose samples obtained via top-down approaches. Here, we present a bottom-up approach that uses well-defined cellulose oligomers as tools to understand the transfer of chirality from the single oligomer to supramolecular assemblies beyond the single cellulose crystal. Synthetic cellulose oligomers with defined sequences self-assembled into thin micrometer-sized platelets with controllable thicknesses. These platelets further assembled into bundles displaying intrinsic chiral features, directly correlated to the monosaccharide chirality. Altering the stereochemistry of the oligomer termini impacted the chirality of the self-assembled bundles and thus allowed for the manipulation of the cellulose assemblies at the molecular level. The molecular description of cellulose assemblies and their chirality will improve our ability to control and tune cellulose materials. The bottom-up approach could be expanded to other polysaccharides whose supramolecular chirality is less understood.

Chiral self-assembly of cellulose nanocrystals is driven by crystallite bundles

The transfer of chirality across length-scales is an intriguing and universal natural phenomenon. However, connecting the properties of individual building blocks to the emergent features of their resulting large-scale structure remains a challenge. In this work, we investigate the origins of mesophase chirality in cellulose nanocrystal suspensions, whose self-assembly into chiral photonic films has attracted significant interest. By correlating the ensemble behaviour in suspensions and films with a quantitative morphological analysis of the individual nanoparticles, we reveal an inverse relationship between the cholesteric pitch and the abundance of laterally-bound composite particles. These 'bundles' thus act as colloidal chiral dopants, analogous to those used in molecular liquid crystals, providing the missing link in the hierarchical transfer of chirality from the molecular to the colloidal scale.