Monitoring peanut allergen in food products by measuring Ara h 1

Study on the induced polymeric protein aggregation and immunoreactivity in biscuits enriched with peanut flour

This work deals with the study on the protein extractability of biscuits incurring different percentages of roasted peanut flour. The presence of two different flours influenced the rate of protein aggregation and protein extractability, according to the percentage of roasted peanut flour added to the formulation and assessing these features by testing the use of two buffers. Results showed that gluten network arrangement of biscuits was influenced by the flours mixture besides the baking, with possible different protein organizations. Protein extractability was affected, underlining a higher content of protein aggregates at high molecular weight especially with the addition of 20% of peanut flour, characterized by hydrophobic and reducible covalent bonds, as suggested by the higher extractability obtained with the buffer with chaotropic and reducing agents. These results suggested a possible induced supramolecular protein organization in these products, which could affect the immunoreactivity of the main allergens occurred in the formulation.

Atmospheric cold plasma reduces Ara h 1 antigenicity in roasted peanuts by altering the protein structure and amino acid profile

Ara h 1 is the major allergen in peanuts. To enhance the unique flavor, peanuts are usually roasted at high temperatures. However, roasting can increase the allergenic potential, owing to glycation of allergens. Atmospheric cold plasma (ACP) is a non-thermal processing technology that generates reactive species, enabling protein structural changes. Herein, glucose was also added to the ACP-treated peanut protein before roasting. The content and antigenicity of the advanced glycation end products were measured. The antigenicity was evaluated by ELISA and in vitro digestion assays. The amino acid profile and secondary and tertiary protein structures were also assessed. The antigenicity of Ara h 1 decreased by 91 % and 76 % after 30 min of air and nitrogen plasma treatment, respectively. The glycation degree and thermal and digestive stabilities were also reduced. These results correlated with the structural changes, denaturation, and aggregation. Therefore, cold plasma may reduce the allergic effects of peanuts.

Mitigating the allergenicity of peanut allergen Ara h 1 by cold atmospheric pressure argon plasma jet

BACKGROUND

Peanut allergy is recognized as a major food allergy that triggers severe and even fatal symptoms. Avoidance of peanuts in the diet is the main option for current safety management. Processing techniques reducing peanut allergenicity are required to develop other options. Cold plasma is currently considered as a novel non-thermal approach to alter protein structure and has the potential to alleviate immunoreactivity of protein allergen.

RESULTS

The application of a cold argon plasma jet to peanut protein extract could reduce the amount of a 64 kDa protein band corresponding to a major peanut allergen Ara h 1 using sodium dodecyl sulfate-polyacrylamide gel electrophoresis, but the overall protein size distribution did not change significantly. A decrease in peanut protein solubility was a possible cause that led to the loss of protein content in the soluble fraction. Immunoblotting and enzyme-linked immunosorbent assay elucidated that the immunoreactivity of Ara h 1 was significantly decreased with the time treated with plasma. Ara h 1 antigenicity reduced by 38% after five scans (approximately 3 min) of cold argon plasma jet treatment, and the reduction was up to 66% after approximately 15 min of treatment.

CONCLUSION

The results indicate that cold argon plasma jet treatment could be a suitable platform for alleviating the immunoreactivity of peanut protein. This work demonstrates an efficient, compact, and rapid platform for mitigating the allergenicity of peanuts, and shows great potential for the plasma platform as a non-thermal technique in the food industry. © 2023 Society of Chemical Industry.

Simultaneous quantification of specific food allergen proteins using a fluorescent multiplex array

The aim was to develop a fluorescent multiplex array for simultaneously measuring regulated food allergens using specific allergen protein molecules from peanut, tree nut, cow's milk, egg, soy, fish, shellfish, sesame, mustard and celery. Microspheres coupled to specific monoclonal antibodies were used for allergen detection, with purified allergens as reference standards.Standard curves for 17 allergens covered a 5-log dynamic range. Intra- and inter-assay acceptance criteria were within 70-130% recovery and a CV of ≤15%. Food reference materials contained high levels of their respective major allergens (2000-175,000 µg/g), Similar high allergen levels were found in 10 selected foods analysed using a 9-plex array. Egg, milk, peanut, hazelnut and walnut allergens were detectable in chocolate bars with incurred allergens at 3, 10, 30, and 100 ppm. The multiplex array is an efficient tool for measuring specific food allergens, with applications for risk assessment and standardization of therapeutic products for food allergy.

Sensitive and selective detection of peanut allergen Ara h 1 by ELISA and lateral flow immunoassay

The Ara h1 protein is a peanut allergen and it provides a useful biomarker for the detection of peanut protein. In this manuscript, we describe the generation of monoclonal antibodies (MAbs) against the Ara h1 protein and their development into sensitive and selective immunoassays for peanut detection. Our enzyme-linked immunosorbent assay (sELISA) detects a peanut meal standard with a sensitivity of 10 ng/mL and 500 ng/mL by lateral flow immunoassay (LFIA). MAb Ara h1 binding epitopes were identified, and immunoassay detection was limited to peanut meal varieties irrespective of thermal treatment. No binding was observed from tree nut meals (100-0.4 µg/mL). Peanut allergen detection during food manufacturing can limit the incidence of product recall resulting from cross-contact contamination or improper labeling of finished food products. Detection of Ara h1 by immunoassay can provide a cost-effective method for rapid surveillance of peanut during food production and prior to consumption.

Doses of Specific Allergens in Early Introduction Foods for Prevention of Food Allergy

BACKGROUND

Consumption of common allergenic foods, such as peanut, in early life can reduce the risk of food allergy among high-risk children and is recommended in revised clinical guidelines. Commercial early allergen introduction foods (EIF) containing single or multiple allergenic foods for feeding infants are promoted to consumers and health care providers as aids to prevent food allergy.

OBJECTIVE

To determine the concentration and doses of major food allergens in EIF.

METHODS

Extracts from 32 EIF and 4 control foods were analyzed for 17 allergens: Ara h 1, Ara h 3, Ara h 6, Bos d 5, Bos d 11, Gal d 1, Gal d 2, Ana o 3, Cor a 9, Jug r 1, Gly m 5, Ses i 1, Api g 1, Sin a 1, Cyp c 1, shrimp tropomyosin, and Tri a 19 using a validated fluorescent multiplex array. Ara h 2 was measured by enzyme-linked immunosorbent assay.

RESULTS

The EIF comprised 1-8 samples of 32 foods (n = 86). Combined peanut allergen levels of up to 26,000 μg/g were measured in peanut puffs (doses of 65-182 mg per 7 g serving). Peanut allergens were not detected in mixed food blend puffs. Major allergen levels of >10,000 μg/g were found in several milk, egg, and peanut powders, or combinations thereof, with cumulative allergen doses of 159-2946 mg in the EIF. Mixed food blend powders, puffs crackers, and fruit sauces contained much lower allergen levels, often <10 μg/g, and some had undetectable allergens. The allergen concentration in these EIF varied over a >3 log range and provided lower cumulative doses of allergen.

CONCLUSIONS

Significant variability in allergen composition, concentration, and dose per serving were observed in EIF containing the same foods. The doses of allergens consumed by potentially at-risk infants in early life were EIF dependent. Guidelines should be established to enable consumers and health care providers to make informed decisions about EIF and to improve the formulation and standardization of EIF for prevention of food allergy.

An immunochromatographic assay utilizing magnetic nanoparticles to detect major peanut allergen Ara h 1 in processed foods

This study describes an immunomagnetic nanoparticle (IMNP)-based lateral flow assay (LFA) for detecting the major peanut allergen Ara h 1. We developed a clearly specific method in identifying peanut from ten other seeds and nuts, and a good visual limit of detection (vLOD) of 0.01 μg/mL Ara h 1 in PBS. PBS that contains 1 M NaCl and 2% Tween 20 was determined to be the optimal extraction buffer for isolating Ara h 1 from cookie, milk and chocolate with vLOD values of 0.5 μg/g, 0.5 μg/mL, and 1 μg/g, respectively. Forty two processed foods were simultaneously analyzed using this method and an AOAC-approved ELISA kit. The specificity and sensitivity of this assay were thus determined to be 100 and 95%, respectively. This new IMNP-based LFA has potential as a rapid tool for screening processed foods for Ara h 1 residues.

Protein mapping of peanut extract with capillary electrophoresis

Protein separation can be achieved with different modes of capillary electrophoresis, such as with capillary gel electroporesis (CGE) or with capillary zone electrophoresis (CZE). CZE protein mapping of peanut extract was approached in four different ways, combining neutral-coated or multilayer-coated capillaries with pHs well over or under the isoelectric point range of the proteins of interest. At acidic pHs, the mobility ranges of the major peanut allergens Ara h1, Ara h2, Ara h3, and Ara h6 were identified. Although the pH is a major factor in CZE separation, buffers with different compositions but with the same pH and ionic strength showed significantly different resolutions. Different components of the electrolyte were studied in a multifactorial design of experiment. CE-SDS and CZE proved to be suitable for protein mapping and we were able to distinguish different batches of peanut extract and burned peanut extract.

An automatic integrated microfluidic system for allergy microarray chips

Billions of people suffer from allergies, though in many cases, the source allergen is unknown. If one knows which allergens to avoid, this would result in an improved quality of life. Since a rapid, high-throughput, automatic allergen detection method is of great need, an integrated system combining microfluidic techniques and microarray chips has been developed herein to automate the allergen detection process. The developed microfluidic system could automatically carry out the entire procedure such as reagent incubation, hybridization, transport, and washing without any intermediate step. The microarray chip could be easily detached from the microfluidic chip afterwards, enabling it to be read under a fluorescence scanner. The experimental results indicated that the developed microfluidic system can automatically perform all the incubation processes, including hybridization, reagent transportation, and washing. It is worth noting that active mixing has been applied in the present study which is different from our previous study using micro-channels for passive incubation. Comparable results to a conventional benchtop approach were obtained in ∼30% less time with ∼25% less samples/reagents. Similar results were also demonstrated while detecting immunoglobulin E samples. The developed system could therefore provide a rapid, reliable, and automated approach for detecting allergen-specific antibodies in human serum.

Assessment of peanut allergen Ara h1 in processed foods using a SWCNTs-based nanobiosensor

The goals of this research were to develop a rapid single-walled carbon nanotube (SWCNT)-based biosensor and to employ it to commercial food products for Ara h1 detection. The SWCNT-based biosensor was fabricated with SWCNTs immobilized with antibody (pAb) through hybridization of 1-pyrenebutanoic acid succinimidyl ester (1-PBASE) as a linker. The resistance difference (ΔR) was calculated by measuring linear sweep voltammetry (LSV) using a potentiostat. Resistance values increased as the concentration of Ara h1 increased over the range of 1 to 105 ng/L. The specific binding of anti-Ara h1 pAb to antigen including Ara h1 was confirmed by both indirect ELISA kit and biosensor assay. The biosensor was exposed to extracts prepared from commercial processed food containing peanuts, or no peanuts, and could successfully distinguish the peanut containing foods. In addition, the application of present biosensor approach documented the precise detection of Ara h1 concentrations in commercially available peanut containing foods.

Specific allergen profiles of peanut foods and diagnostic or therapeutic allergenic products

BACKGROUND

Generic immunoassays for peanut cannot discriminate between allergen levels in peanut-derived food products or therapeutics. Clinical trials of oral immunotherapy (OIT) are strengthened by using standardized peanut preparations with defined doses of major allergens.

OBJECTIVE

This article describes measurement of Ara h 1, Ara h 2, and Ara h 6 in peanut foods and in peanut flour extracts used for allergy diagnosis and OIT.

METHODS

Monoclonal antibody-based enzyme immunoassays for Ara h 1, Ara h 2, and Ara h 6 were used to compare allergen levels in peanut (n = 16) and tree nut (n = 16) butter, peanut flour (n = 11), oils (n = 8), extracts used for diagnosis and OIT (n = 5), and the National Institute for Standards and Technology Peanut Butter Standard Reference Material 2387.

RESULTS

Roasted peanut butters contained 991 to 21,406 μg/g Ara h 1 and exceeded Ara h 2 and Ara h 6 levels by 2- to 4-fold. Similarly, National Institute for Standards and Technology Peanut Butter Standard Reference Material 2387 contained 11,275 μg/g Ara h 1, 2,522 μg/g Ara h 2, and 2,036 μg/g Ara h 6. In contrast, peanut flours contained 787 to 14,631 μg/g Ara h 2 and exceeded Ara h 1 levels by 2- to 20-fold. Flour extracts used for OIT contained 394 to 505 μg/mL Ara h 1, 1,187 to 5,270 μg/mL Ara h 2, and 1,104 to 8,092 μg/mL Ara h 6. In most cases specific peanut allergens were not detected in tree nut butters or peanut oils.

CONCLUSIONS

The results show marked differences in specific peanut allergen profiles in peanut butter and flour and peanut preparations for clinical use. Roasting can increase Ara h 1 levels in peanut butter. Variability in allergen levels could affect the outcome of clinical trials of peanut OIT, especially with respect to Ara h 1. Specific allergen measurements will improve standardization and provide accurate dosing of peanut preparations that are being used for OIT.

Monoclonal Antibodies to Recombinant Fag e 3 Buckwheat Allergen and Development of a Two-site ELISA for Its Quantification

Purpose

Buckwheat is a major cause of anaphylaxis, and Fag e 3 is the key major allergen in buckwheat. However, an immunoassay system for the quantification of Fag e 3 has yet to be developed.

Methods

We developed a 2-site enzyme-linked immunosorbent assay (ELISA) using monoclonal antibodies (mAbs) produced against recombinant Fag e 3. We applied this ELISA to quantify native Fag e 3 in total buckwheat extract.

Results

Four clones of mAbs were produced, and all recognized vicilin allergens not only from buckwheat, but also from peanut and walnut. However, the ELISA using these antibodies was only able to quantify Fag e 3 in the total extract after addition of 1% sodium dodecyl sulphate (SDS) and heating, which facilitated dissociation of the allergen. The detection limit of the developed 2-site ELISA was 0.8 µg/mL. The measurement of Fag e 3 in the total extract of buckwheat showed that approximately 12% of protein in total buckwheat extract was Fag e 3.

Conclusions

We have developed an ELISA system for the quantification of the group 3 buckwheat allergen, Fag e 3, specifically. This assay will be useful for standardization of buckwheat allergens and monitoring of buckwheat contamination in foods.

Peanut protein extraction conditions strongly influence yield of allergens Ara h 1 and 2 and sensitivity of immunoassays

The clinical importance of peanut (Arachis hypogaea) allergies demands standardized allergen extraction protocols. We determined the effectiveness of common extraction conditions (20 buffers, defatting reagents, extraction time/temperatures, processing, extraction repeats) on crude protein and Ara h 1 and 2 yields. Despite similar 1D-gel profiles, defatting with n-hexane resulted in significantly higher yields of crude protein, Ara h 1, and Ara h 2 than with diethyl ether. The yields were affected by the composition and pH of the extraction buffers and other conditions, but crude protein yield did not always correlate with Ara h 1 and 2 yields. Denaturants, reducing agents, acidic buffers, and thermal processing of peanuts perturbed allergen quantification in ELISAs, probably via exposure of additional epitopes. Allergen detection in 2D-Western blots with PBS resulted in greater sensitivity than with TBS or Tris. We recommend that allergen extraction conditions be selected based on the research question being investigated.

Rapid Detection of Food Allergens by Microfluidics ELISA-Based Optical Sensor

The risks associated with the presence of hidden allergens in food have increased the need for rapid, sensitive, and reliable methods for tracing food allergens in commodities. Conventional enzyme immunosorbent assay (ELISA) has usually been performed in a centralized lab, requiring considerable time and sample/reagent consumption and expensive detection instruments. In this study, a microfluidic ELISA platform combined with a custom-designed optical sensor was developed for the quantitative analysis of the proteins wheat gluten and Ara h 1. The developed microfluidic ELISA biosensor reduced the total assay time from hours (up to 3.5 h) to 15-20 min and decreased sample/reagent consumption to 5-10 μL, compared to a few hundred microliters in commercial ELISA kits, with superior sensitivity. The quantitative capability of the presented biosensor is a distinctive advantage over the commercially available rapid methods such as lateral flow devices (LFD) and dipstick tests. The developed microfluidic biosensor demonstrates the potential for sensitive and less-expensive on-site determination for rapidly detecting food allergens in a complex sample system.

A microfluidic biosensor using graphene oxide and aptamer-functionalized quantum dots for peanut allergen detection

The increasing prevalence of food allergies and the intake of packing foods in the past two decades urge the need for more rapid, accurate, and sensitive assays to detect potential allergens in food in order to control the allergen content. Most of the commercial analytical tools for allergen detection rely on immunoassays such as ELISA. As far as disadvantages, ELISA can be time-consuming and expensive. Biosensors appear as a suitable alternative for the detection of allergens because they are rapid, highly sensitive, selective, less expensive, environmentally friendly, and easy to handle. In this study, we developed a microfluidic system integrated with a quantum dots (Qdots) aptamer functionalized graphene oxide (GO) nano-biosensor for simple, rapid, and sensitive food allergen detection. The biosensor utilized Qdots-aptamer-GO complexes as probes to undergo conformational change upon interaction with the food allergens, resulting in fluorescence changes due to the fluorescence quenching and recovering properties of GO by adsorption and desorption of aptamer-conjugated Qdots. This one-step 'turn on' homogenous assay in a ready-to-use microfluidic chip took ~10min to achieve a quantitative detection of Ara h 1, one of the major allergens appearing in peanuts. The results suggested this system had remarkable sensitivity and selectivity. The integration of a microfluidics platform in a homemade miniaturized optical analyzer provides a promising way for the rapid, cost-effective, and accurate on-site determination of food allergens. This biosensor can also be extended to the detection of other food allergens with a selection of corresponding aptamers.

Sensitive and selective magnetoimmunosensing platform for determination of the food allergen Ara h 1

A highly sensitive disposable amperometric immunosensor based on the use of magnetic beads (MBs) is described for determination of Ara h 1, the major peanut allergen, in only 2h. The approach uses a sandwich configuration involving selective capture and biotinylated detector antibodies and carboxylic acid-modified MBs (HOOC-MBs). The MBs bearing the immunoconjugates are captured by a magnet placed under the surface of a disposable screen-printed carbon electrode (SPCE) and the affinity reactions are monitored amperometrically at -0.20 V (vs a Ag pseudo-reference electrode) in the presence of hydroquinone (HQ) as electron transfer mediator and upon addition of H2O2 as the enzyme substrate. The developed immunosensor exhibits a wide range of linearity between 20.8 and 1000.0 ng mL(-1) Ara h 1, a detection limit of 6.3 ng mL(-1), a great selectivity, a good reproducibility with a RSD of 6.3% for six different immunosensors and a useful lifetime of 25 days. The usefulness of the immunosensor was demonstrated by determining Ara h 1 in different matrices (food extracts and saliva). The results correlated properly with those provided by a commercial ELISA method offering a reliable and promising analytical screening tool in the development of user-friendly devices for on-site determination of Ara h 1.

Comparison of six commercial ELISA kits for their specificity and sensitivity in detecting different major peanut allergens

Six commercial peanut enzyme-linked immunosorbent assay kits were assessed for their ability to recover peanut from the standard reference material 2387 peanut butter and also for their specificity in detecting four major peanut allergens, Ara h 1, Ara h 2, Ara h 3, and Ara h 6. The percentage recovery of peanut from peanut butter differed across different kits as well as at different sample concentrations. The highest recovery was observed with the Romer and R-Biopharm kits, while four other kits were found to underestimate the protein content of the reference peanut butter samples. Five of the kits were most sensitive in detecting Ara h 3 followed by Ara h 1, while hardly recognizing Ara h 2 and Ara h 6. The other kit showed the highest sensitivity to Ara h 2 and Ara h 6, while Ara h 1 and Ara h 3 were poorly recognized. Although Ara h 2 and Ara h 6 are known to be heat stable and more potent allergens, antisera specific to any of these four peanut proteins/allergens may serve as good markers for the detection of peanut residues.

Removal of peanut allergen Ara h 1 from common hospital surfaces, toys and books using standard cleaning methods

Background

In children, a diagnosis of peanut allergy causes concern about accidental exposure because even small amounts of peanut protein could trigger an allergic reaction. Contamination of toys, books or other items by peanut butter in areas where individuals have eaten may occur in hospital waiting rooms and cafeterias. It is not known if hospital cleaning wipes are effective in removing peanut allergen.

Objectives

The purpose of this study was to determine whether cleaning peanut contaminated items with common household and hospital cleaning wipes would remove peanut allergen.

Methods

5 mL of peanut butter was evenly smeared on a 12 inch by 12 inch (30.5 by 30.5 cm) square on a nonporous (laminated plastic) table surface, a plastic doll, and a textured plastic ball, and 2.5 mL was applied to smooth and textured book covers. Samples for measurement of Ara h 1 were collected prior to the application of the peanut butter (baseline), and after cleaning with a common household wipe and two commercial hospital wipes. A monoclonal-based ELISA for arachis hypogaea allergen 1 (Ara h 1), range of detection 1.95-2000 ng/mL, was used to assess peanut allergen on each item. The samples were diluted 1:50 for testing.

Results

At baseline, there was no detectable Ara h 1 allergen on any item at baseline. Detectable Ara h 1 was detected on all products after applying peanut butter (range 1.2-19.0 micrograms/mL).

After cleaning with any product, no Ara h 1 was detected on any item.

Conclusions

Table surfaces, book covers and plastic toys can be cleaned to remove peanut allergen Ara h 1 using common household and hospital cleaning wipes. Regular cleaning of these products or cleaning prior to their use should be promoted to reduce the risk of accidental peanut exposure, especially in areas where they have been used by many children.

Smartphone instrument for portable enzyme-linked immunosorbent assays

We demonstrate the utilization of a smartphone camera as a spectrometer that is capable of measuring Enzyme Linked Immunosorbent Assays (ELISA) at biologically-relevant concentrations with the aid of a custom cradle that aligns a diffraction grating and a collimating lens between a light source and the imaging sensor. Two example biomarkers are assayed using conventional ELISA protocols: IL-6, a protein used diagnostically for several types of cancer, and Ara h 1, one of the principle peanut allergens. In addition to the demonstration of limits of detection at medically-relevant concentrations, a screening of various cookies was completed to measure levels of peanut cross-contamination in local bakeries. The results demonstrate the utility of the instrument for quantitatively performing broad classes of homogeneous colorimetric assays, in which the endpoint readout is the color change of a liquid sample.

Development of a genosensor for peanut allergen ARA h 2 detection and its optimization by surface response methodology

A new selective electrochemical genosensor has been developed for the detection of an 86-mer DNA peanut sequence encoding part of the allergen Ara h 2 (conglutin-homolog protein). The method is based on a sandwich format, which presents two advantages: it permits shortening the capture probe and avoids labeling of the target. Screen-printed gold electrodes have been used as platform for the immobilization of oligonucleotides by the well-known S-Au bond. Mixed self-assembled monolayers (SAM), including thiol-modified capture probe and mercaptohexanol, were prepared to achieve an organized, homogeneous and not too compact SAM in which unspecific adsorption of the capture probe would be prevented. The optimization of the sensing phase was carried out using the Design of Experiments (DoE) approach. Traditionally, response optimization is achieved by changing the value of one factor at a time until there is no further improvement. However, DoE involves regulating the important factors so that the result becomes optimal. Optimized conditions were found to be 1.34 µM for capture probe concentration and 3.15 mM for mercaptohexanol (spacer) concentration. When the optimal conditions were employed the analytical performance of the proposed genosensor improved significantly, showing a sensitivity as high as 3 µA/nM, with a linear range from 5×10(-11) to 5×10(-8) M and a detection limit of 10 pM.

Development of a monoclonal antibody-based sandwich ELISA for peanut allergen Ara h 1 in food

We have established a highly sensitive sandwich enzyme-linked immunosorbent assay (ELISA) based on two monoclonal antibodies (mAb) to measure the content of the major peanut allergen Ara h 1 in foods. Two mAbs were selected out of 12 murine hybridoma cells secreting Ara h 1-specific antibody. Using mAb 6 as the capture antibody and HRP-labelled mAb 4 as the detection antibody, the limit of detection (LOD) the assay was 0.34 ng/mL. Cross-reaction analysis showed that this method was strongly specific and had no cross-reactions with Ara h 2, pea protein or soy protein. Sample analysis showed that this ELISA was a useful tool to monitor peanut allergens in food products by measuring Ara h 1 content.

Effects of different extraction buffers on peanut protein detectability and lateral flow device (LFD) performance

The accidental uptake of peanuts can cause severe health reactions in allergic individuals. Reliable determination of traces of peanuts in food products is required to support correct labelling and therefore minimise consumers' risk. The immunoanalytical detectability of potentially allergenic peanut proteins is dependent on previous heat treatment, the extraction capacity of the applied buffer and the specificity of the antibody. In this study a lateral flow device (LFD) for the detection of peanut protein was developed and the capacity of 30 different buffers to extract proteins from mildly and strongly roasted peanut samples as well as their influence on the test strip performance were investigated. Most of the tested buffers showed good extraction capacity for putative Ara h 1 from mildly roasted peanuts. Protein extraction from dark-roasted samples required denaturing additives, which were proven to be incompatible with LFD performance. High-pH buffers increased the protein yield but inhibited signal generation on the test strip. Overall, the best results were achieved using neutral phosphate buffers but equal detectability of differently altered proteins due to food processing cannot be assured yet for immunoanalytical methods.

Crystallization and preliminary X-ray analysis of the major peanut allergen Ara h 1 core region

Peanuts contain some of the most potent food allergens known to date. Ara h 1 is one of the three major peanut allergens. As a first step towards three-dimensional structure elucidation, recombinant Ara h 1 core region was cloned, expressed in Escherichia coli and purified to homogeneity. Crystals were obtained using 0.1 M sodium citrate pH 5.6, 0.1 M NaCl, 15% PEG 400 as precipitant. The crystals diffracted to 2.25 A resolution using synchrotron radiation and belonged to the monoclinic space group C2, with unit-cell parameters a=156.521, b=88.991, c=158.971 A, beta=107.144 degrees. Data were collected at the BL-38B1 station of SPring-8 (Hyogo, Japan).

Peanut varieties with reduced Ara h 1 content indicating no reduced allergenicity

Peanut allergy is a major cause of food-induced severe anaphylactic reactions. To date, no medical care is available to prevent and treat peanut allergy and therefore hypoallergenic peanut varieties are of considerable health political and economic interest. Major allergens that induce IgE-responses in peanut-sensitive patients are Ara h 1, Ara h 2 and Ara h 3/4. In order to identify hypoallergenic peanuts, commercially locally available peanut varieties were screened for their allergen content. Ara h 1-deficient peanuts from Southeast Asia were identified by SDS-PAGE, immunoblotting, inhibition assays and ELISA. 2-D PAGE analyses demonstrated the different compositions of the tested extracts and revealed a number of variations of the allergen patterns of peanuts from different varieties. Mediator release experiments of these peanut extracts demonstrated similar allergenicities as compared with standard peanut extract. These results indicate that the allergenicity of peanuts with reduced Ara h 1 content might be compensated by the other allergens, and thus do not necessarily cause a reduction of allergenicity.

Development and validation of an indirect competitive enzyme linked-immunosorbent assay for the determination of potentially allergenic sesame (Sesamum indicum) in food

This study was designed to develop an indirect competitive enzyme linked-immunosorbent assay (ELISA) to detect traces of sesame in food. Antibodies against sesame were prepared by immunizing a hen with a protein extract of white, peeled sesame. The ELISA did not show any cross-reactivity with 12 of 13 food ingredients tested, only for chocolate was a low cross-reactivity of 0.7% observed. To eliminate matrix effects, sesame protein standard solutions were prepared by diluting the sesame extract with blank food matrix (1:20 diluted with PBS). Recovery of sesame protein in food samples (crisp toasts, snacks, and rolls) spiked with different sesame protein concentrations ranged from 85% to 120%, with the exception of multigrain crisp toast, resulting in too high recoveries (117%-160%) and whole grain bread, yielding too low recoveries (70%-85%). In crisp bread, cracker, cereals, and snacks the limit of detection (LOD) was found to be 5 microg of sesame protein/g of food, in fresh breads and rolls, the LOD was 11 microg of sesame protein/g of food.