Formation of transitory intrachain and interchain disulfide bonds accompanies the folding and oligomerization of simian virus 40 Vp1 in the cytoplasm

Hierarchical assembly is more robust than egalitarian assembly in synthetic capsids

Self-assembly of complex and functional materials remains a grand challenge in soft material science. Efficient assembly depends on a delicate balance between thermodynamic and kinetic effects, requiring fine-tuning affinities and concentrations of subunits. By contrast, we introduce an assembly paradigm that allows large error-tolerance in the subunit affinity and helps avoid kinetic traps. Our combined experimental and computational approach uses a model system of triangular subunits programmed to assemble into T = 3 icosahedral capsids comprising 60 units. The experimental platform uses DNA origami to create monodisperse colloids whose three-dimensional geometry is controlled to nanometer precision, with two distinct bonds whose affinities are controlled to kBT precision, quantified in situ by static light scattering. The computational model uses a coarse-grained representation of subunits, short-ranged potentials, and Langevin dynamics. Experimental observations and modeling reveal that when the bond affinities are unequal, two distinct hierarchical assembly pathways occur, in which the subunits first form dimers in one case and pentamers in another. These hierarchical pathways produce complete capsids faster and are more robust against affinity variation than egalitarian pathways, in which all binding sites have equal strengths. This finding suggests that hierarchical assembly may be a general engineering principle for optimizing self-assembly of complex target structures.

Immunological Analysis of Nodavirus Capsid Displaying the Domain III of Japanese Encephalitis Virus Envelope Protein

Japanese encephalitis virus (JEV) is the pathogen that causes Japanese encephalitis (JE) in humans and horses. Lethality of the virus was reported to be between 20–30%, of which, 30–50% of the JE survivors develop neurological and psychiatric sequelae. Attributed to the low effectiveness of current therapeutic approaches against JEV, vaccination remains the only effective approach to prevent the viral infection. Currently, live-attenuated and chimeric-live vaccines are widely used worldwide but these vaccines pose a risk of virulence restoration. Therefore, continuing development of JE vaccines with higher safety profiles and better protective efficacies is urgently needed. In this study, the Macrobrachium rosenbergii nodavirus (MrNV) capsid protein (CP) fused with the domain III of JEV envelope protein (JEV-DIII) was produced in Escherichia coli. The fusion protein (MrNV-CP^JEV-DIII) assembled into virus-like particles (VLPs) with a diameter of approximately 18 nm. The BALB/c mice injected with the VLPs alone or in the presence of alum successfully elicited the production of anti-JEV-DIII antibody, with titers significantly higher than that in mice immunized with IMOJEV, a commercially available vaccine. Immunophenotyping showed that the MrNV-CP^JEV-DIII supplemented with alum triggered proliferation of cytotoxic T-lymphocytes, macrophages, and natural killer (NK) cells. Additionally, cytokine profiles of the immunized mice revealed activities of cytotoxic T-lymphocytes, macrophages, and NK cells, indicating the activation of adaptive cellular and innate immune responses mediated by MrNV-CP^JEV-DIII VLPs. Induction of innate, humoral, and cellular immune responses by the MrNV-CP^JEV-DIII VLPs suggest that the chimeric protein is a promising JEV vaccine candidate.

Host-membrane interacting interface of the SARS coronavirus envelope protein: Immense functional potential of C-terminal domain

The Envelope (E) protein in SARS Coronavirus (CoV) is a small structural protein, incorporated as part of the envelope. A major fraction of the protein has been known to be associated with the host membranes, particularly organelles related to intracellular trafficking, prompting CoV packaging and propagation. Studies have elucidated the central hydrophobic transmembrane domain of the E protein being responsible for much of the viroporin activity in favor of the virus. However, newer insights into the organizational principles at the membranous compartments within the host cells suggest further complexity of the system. The lesser hydrophobic Carboxylic-terminal of the protein harbors interesting amino acid sequences- suggesting at the prevalence of membrane-directed amyloidogenic properties that remains mostly elusive. These highly conserved segments indicate at several potential membrane-associated functional roles that can redefine our comprehensive understanding of the protein. This should prompt further studies in designing and characterizing of effective targeted therapeutic measures.

•

The SARS CoV Envelope protein is a small structural protein of the virus, responsible for viroporin like activity.

•

Membrane- E protein interaction provides an useful insight into gaining mechanistic insight into its viroporin functions.

•

The central hydrophobic transmembrane domain of E protein, known to affect ion-channel formation.

•

The C-terminal region of the protein show further potential host-membrane directed functional roles.

•

The highly conserved amyloidogenic amino acid stretches of the C-terminal suggest for its contribution to CoV propagation.

pH stability and disassembly mechanism of wild-type simian virus 40

Viruses are remarkable self-assembled nanobiomaterial-based machines, exposed to a wide range of pH values. Extreme pH values can induce dramatic structural changes, critical for the function of the virus nanoparticles, including assembly and genome uncoating. Tuning cargo-capsid interactions is essential for designing virus-based delivery systems. Here we show how pH controls the structure and activity of wild-type simian virus 40 (wtSV40) and the interplay between its cargo and capsid. Using cryo-TEM and solution X-ray scattering, we found that wtSV40 was stable between pH 5.5 and 9, and only slightly swelled with increasing pH. At pH 3, the particles aggregated, while capsid protein pentamers continued to coat the virus cargo but lost their positional correlations. Infectivity was only partly lost after the particles were returned to pH 7. At pH 10 or higher, the particles were unstable, lost their infectivity, and disassembled. Using time-resolved experiments we discovered that disassembly began by swelling of the particles, poking a hole in the capsid through which the genetic cargo escaped, followed by a slight shrinking of the capsids and complete disassembly. These findings provide insight into the fundamental intermolecular forces, essential for SV40 function, and for designing virus-based nanobiomaterials, including delivery systems and antiviral drugs.

Empty SV40 capsids increase survival of septic rats by eliciting numerous host signaling networks that participate in a number of systemic functions

Sepsis is an excessive, dysregulated immune response to infection that activates inflammatory and coagulation cascades, which may lead to tissue injury, multiple organ dysfunction syndrome and death. Millions of individuals die annually of sepsis. To date, the only treatment available is antibiotics, drainage of the infection source when possible, and organ support in intensive care units. Numerous previous attempts to develop therapeutic treatments, directed at discreet targets of the sepsis cascade, could not cope with the complex pathophysiology of sepsis and failed. Here we describe a novel treatment, based on empty capsids of SV40 (nanocapsids - NCs). Studies in a severe rat sepsis model showed that pre-treatment by NCs led to a dramatic increase in survival, from zero to 75%. Transcript analyses (RNAseq) demonstrated that the NC treatment is a paradigm shift. The NCs affect multiple facets of biological functions. The affected genes are modified with time, adjusting to the recovery processes. The NCs effect on normal control rats was negligible. The study shows that the NCs are capable of coping with diseases with intricate pathophysiology. Further studies are needed to determine whether when applied after sepsis onset, the NCs still improve outcome.

Effect of Calcium Ions and Disulfide Bonds on Swelling of Virus Particles

Multivalent ions affect the structure and organization of virus nanoparticles. Wild-type simian virus 40 (wt SV40) is a nonenveloped virus belonging to the polyomavirus family, whose external diameter is 48.4 nm. Calcium ions and disulfide bonds are involved in the stabilization of its capsid and are playing a role in its assembly and disassembly pathways. Using solution small-angle X-ray scattering (SAXS), we found that the volume of wt SV40 swelled by about 17% when both of its calcium ions were chelated by ethylene glycol-bis(2-aminoethylether)-N,N,N',N'-tetraacetic acid and its disulfide bonds were reduced by dithiothreitol. By applying osmotic stress, the swelling could be reversed. DNA-containing virus-like particles behaved in a similar way. The results provide insight into the structural role of calcium ions and disulfide bonds in holding the capsid proteins in compact conformation.

Anomalous small viral shells and simplest polyhedra with icosahedral symmetry: the rhombic triacontahedron case

The development of antiviral strategies requires a clear understanding of the principles that control the protein arrangements in viral shells. Considered here are those capsids that violate the paradigmatic Caspar and Klug (CK) model, and it is shown that the important structural features of such anomalous shells from the Picobirnaviridae, Flaviviridae and Leviviridae families can be revealed by models in the form of spherical icosahedral packings of equivalent rhombic structural units (SUs). These SUs are composed of protein dimers forming the investigated capsids which, as shown here, are based on the rhombic triacontahedron (RT) geometry. How to modify the original CK approach in order to make it compatible with the considered rhombic tessellations of a sphere is also discussed. Analogies between capsids self-assembled from dimers and trimers are demonstrated. This analysis reveals the principles controlling the localization of receptor proteins (which recognize the host cell) on the capsid surface.

Crystallization, Reentrant Melting, and Resolubilization of Virus Nanoparticles

Crystallization is a fundamental and ubiquitous process that is well understood in the case of atoms or small molecules, but its outcome is still hard to predict in the case of nanoparticles or macromolecular complexes. Controlling the organization of virus nanoparticles into a variety of 3D supramolecular architectures is often done by multivalent ions and is of great interest for biomedical applications such as drug or gene delivery and biosensing, as well as for bionanomaterials and catalysis. In this paper, we show that slow dialysis, over several hours, of wild-type Simian Virus 40 (wt SV40) nanoparticle solution against salt solutions containing MgCl₂, with or without added NaCl, results in wt SV40 nanoparticles arranged in a body cubic center crystal structure with Im3m space group, as a thermodynamic product, in coexistence with soluble wt SV40 nanoparticles. The nanoparticle crystals formed above a critical MgCl₂ concentrations. Reentrant melting and resolubilization of the virus nanoparticles took place when the MgCl₂ concentrations passed a second threshold. Using synchrotron solution X-ray scattering we determined the structures and the mass fraction of the soluble and crystal phases as a function of MgCl₂ and NaCl concentrations. A thermodynamic model, which balances the chemical potentials of the Mg²⁺ ions in each of the possible states, explains our observations. The model reveals the mechanism of both the crystallization and the reentrant melting and resolubilization and shows that counterion entropy is the main driving force for both processes.

Modeling Viral Capsid Assembly

I present a review of the theoretical and computational methodologies that have been used to model the assembly of viral capsids. I discuss the capabilities and limitations of approaches ranging from equilibrium continuum theories to molecular dynamics simulations, and I give an overview of some of the important conclusions about virus assembly that have resulted from these modeling efforts. Topics include the assembly of empty viral shells, assembly around single-stranded nucleic acids to form viral particles, and assembly around synthetic polymers or charged nanoparticles for nanotechnology or biomedical applications. I present some examples in which modeling efforts have promoted experimental breakthroughs, as well as directions in which the connection between modeling and experiment can be strengthened.

Pathways for virus assembly around nucleic acids

Understanding the pathways by which viral capsid proteins assemble around their genomes could identify key intermediates as potential drug targets. In this work, we use computer simulations to characterize assembly over a wide range of capsid protein-protein interaction strengths and solution ionic strengths. We find that assembly pathways can be categorized into two classes, in which intermediates are either predominantly ordered or disordered. Our results suggest that estimating the protein-protein and the protein-genome binding affinities may be sufficient to predict which pathway occurs. Furthermore, the calculated phase diagrams suggest that knowledge of the dominant assembly pathway and its relationship to control parameters could identify optimal strategies to thwart or redirect assembly to block infection. Finally, analysis of simulation trajectories suggests that the two classes of assembly pathways can be distinguished in single-molecule fluorescence correlation spectroscopy or bulk time-resolved small-angle X-ray scattering experiments.

Roles for human papillomavirus type 16 l1 cysteine residues 161, 229, and 379 in genome encapsidation and capsid stability

Human papillomavirus (HPV) capsids are formed through a network of inter- and intra-pentameric hydrophobic interactions and disulfide bonds. 72 pentamers of the major capsid protein, L1, and an unknown amount of the minor capsid protein, L2, form the structure of the capsid. There are 12 conserved L1 cysteine residues in HPV16. While C175, C185, and C428 have been implicated in the formation of a critical inter-pentameric disulfide bond, no structural or functional roles have been firmly attributed to any of the other conserved cysteine residues. Here, we show that substitution of cysteine residues C161, C229, and C379 for serine hinders the accumulation of endonuclease-resistant genomes as virions mature within stratifying and differentiating human epithelial tissue. C229S mutant virions form, but are non-infectious. These studies add detail to the differentiation-dependent assembly and maturation that occur during the HPV16 life cycle in human tissue.

Scaffold properties are a key determinant of the size and shape of self-assembled virus-derived particles

Controlling the geometry of self-assembly will enable a greater diversity of nanoparticles than now available. Viral capsid proteins, one starting point for investigating self-assembly, have evolved to form regular particles. The polyomavirus SV40 assembles from pentameric subunits and can encapsidate anionic cargos. On short ssRNA (≤814 nt), SV40 pentamers form 22 nm diameter capsids. On RNA too long to fit a T = 1 particle, pentamers forms strings of 22 nm particles and heterogeneous particles of 29-40 nm diameter. However, on dsDNA SV40 forms 50 nm particles composed of 72 pentamers. A 7.2-Å resolution cryo-EM image reconstruction of 22 nm particles shows that they are built of 12 pentamers arranged with T = 1 icosahedral symmetry. At 3-fold vertices, pentamers each contribute to a three-helix triangle. This geometry of interaction is not seen in crystal structures of T = 7 viruses and provides a structural basis for the smaller capsids. We propose that the heterogeneous particles are actually mosaics formed by combining different geometries of interaction from T = 1 capsids and virions. Assembly can be trapped in novel conformations because SV40 interpentamer contacts are relatively strong. The implication is that by virtue of their large catalog of interactions, SV40 pentamers have the ability to self-assemble on and conform to a broad range of shapes.

Cysteine residues in the major capsid protein, Vp1, of the JC virus are important for protein stability and oligomer formation

The capsid of the human polyomavirus JC virus (JCV) consists of 72 pentameric capsomeres of a major structural protein, Vp1. The cysteine residues of the related Vp1 of SV40 are known to contribute to Vp1 folding, pentamer formation, pentamer-pentamer contacts, and capsid stabilization. In light of the presence of a slight structural difference between JCV Vp1 and SV40 counterpart, the way the former folds could be either different from or similar to the latter. We found a difference: an important contribution of Vp1 cysteines to the formation of infectious virions, unique in JCV and absent in SV40. Having introduced amino acid substitution at each of six cysteines (C42, C80, C97, C200, C247, and C260) in JCV Vp1, we found that, when expressed in HeLa cells, the Vp1 level was decreased in C80A and C247A mutants, and remained normal in the other mutants. Additionally, the C80A and C247A Vp1-expressing cell extracts did not show the hemagglutination activity characteristic of JCV particles. The C80A and C247A mutant Vp1s were found to be less stable than the wild-type Vp1 in HeLa cells. When produced in a reconstituted in vitro protein translation system, these two mutant proteins were stable, suggesting that some cellular factors were responsible for their degradation. As determined by their sucrose gradient sedimentation profiles, in vitro translated C247A Vp1 formed pentamers, but in vitro translated C80A Vp1 was entirely monomeric. When individually incorporated into the JCV genome, the C80A and C247A mutants, but not the other Vp1 cysteine residues mutants, interfered with JCV infectivity. Furthermore, the C80A, but not the C247A, mutation prevented the nuclear localization of Vp1 in JCV genome transfected cells. These findings suggest that C80 of JCV Vp1 is required for Vp1 stability and pentamer formation, and C247 is involved in capsid assembly in the nucleus.

Biochemical and biophysical characterization of recombinant yeast proteasome maturation factor ump1

Protein degradation is essential for maintaining cellular homeostasis. The proteasome is the central enzyme responsible for non-lysosomal protein degradation in eukaryotic cells. Although proteasome assembly is not yet completely understood, a number of cofactors required for proper assembly and maturation have been identified. Ump is a short-lived maturation factor required for the efficient biogenesis of the 20S proteasome. Upon the association of the two precursor complexes, Ump is encased and is rapidly degraded after the proteolytic sites in the interior of the nascent proteasome are activated. In order to further understand the mechanisms behind proteasomal maturation, we expressed and purified yeast Ump in E. coli for biophysical and structural analysis. We show that recombinant Ump is purified as a mixture of different oligomeric species and that oligomerization is mediated by intermolecular disulfide bond formation involving the only cysteine residue present in the protein. Furthermore, a combination of bioinformatic, biochemical and structural analysis revealed that Ump shows characteristics of an intrinsically disordered protein, which might become structured only upon interaction with the proteasome subunits.

Validated near-atomic resolution structure of bacteriophage epsilon15 derived from cryo-EM and modeling

High-resolution structures of viruses have made important contributions to modern structural biology. Bacteriophages, the most diverse and abundant organisms on earth, replicate and infect all bacteria and archaea, making them excellent potential alternatives to antibiotics and therapies for multidrug-resistant bacteria. Here, we improved upon our previous electron cryomicroscopy structure of Salmonella bacteriophage epsilon15, achieving a resolution sufficient to determine the tertiary structures of both gp7 and gp10 protein subunits that form the T = 7 icosahedral lattice. This study utilizes recently established best practice for near-atomic to high-resolution (3-5 Å) electron cryomicroscopy data evaluation. The resolution and reliability of the density map were cross-validated by multiple reconstructions from truly independent data sets, whereas the models of the individual protein subunits were validated adopting the best practices from X-ray crystallography. Some sidechain densities are clearly resolved and show the subunit-subunit interactions within and across the capsomeres that are required to stabilize the virus. The presence of the canonical phage and jellyroll viral protein folds, gp7 and gp10, respectively, in the same virus suggests that epsilon15 may have emerged more recently relative to other bacteriophages.

Viral genome structures are optimal for capsid assembly

Understanding how virus capsids assemble around their nucleic acid (NA) genomes could promote efforts to block viral propagation or to reengineer capsids for gene therapy applications. We develop a coarse-grained model of capsid proteins and NAs with which we investigate assembly dynamics and thermodynamics. In contrast to recent theoretical models, we find that capsids spontaneously ‘overcharge’; that is, the negative charge of the NA exceeds the positive charge on capsid. When applied to specific viruses, the optimal NA lengths closely correspond to the natural genome lengths. Calculations based on linear polyelectrolytes rather than base-paired NAs underpredict the optimal length, demonstrating the importance of NA structure to capsid assembly. These results suggest that electrostatics, excluded volume, and NA tertiary structure are sufficient to predict assembly thermodynamics and that the ability of viruses to selectively encapsidate their genomic NAs can be explained, at least in part, on a thermodynamic basis.

DOI:http://dx.doi.org/10.7554/eLife.00632.001

Viruses are infectious agents made up of proteins and a genome made of DNA or RNA. Upon infecting a host cell, viruses hijack the cell’s gene expression machinery and force it to produce copies of the viral genome and proteins, which then assemble into new viruses that can eventually infect other host cells. Because assembly is an essential step in the viral life cycle, understanding how this process occurs could significantly advance the fight against viral diseases.

In many viral families, a protein shell called a capsid forms around the viral genome during the assembly process. However, capsids can also assemble around nucleic acids in solution, indicating that a host cell is not required for their formation. Since capsid proteins are positively charged, and nucleic acids are negatively charged, electrostatic interactions between the two are thought to have an important role in capsid assembly. However, it is unclear how structural features of the viral genome affect assembly, and why the negative charge on viral genomes is actually far greater than the positive charge on capsids. These questions are difficult to address experimentally because most of the intermediates that form during virus assembly are too short-lived to be imaged.

Here, Perlmutter et al. have used state of the art computational methods and advances in graphical processing units (GPUs) to produce the most realistic model of capsid assembly to date. They showed that the stability of the complex formed between the nucleic acid and the capsid depends on the length of the viral genome. Yield was highest for genomes within a certain range of lengths, and capsids that assembled around longer or shorter genomes tended to be malformed.

Perlmutter et al. also explored how structural features of the virus—including base-pairing between viral nucleic acids, and the size and charge of the capsid—determine the optimal length of the viral genome. When they included structural data from real viruses in their simulations and predicted the optimal lengths for the viral genome, the results were very similar to those seen in existing viruses. This indicates that the structure of the viral genome has been optimized to promote packaging into capsids. Understanding this relationship between structure and packaging will make it easier to develop antiviral agents that thwart or misdirect virus assembly, and could aid the redesign of viruses for use in gene therapy and drug delivery.

DOI:http://dx.doi.org/10.7554/eLife.00632.002

Formation of covalently modified folding intermediates of simian virus 40 Vp1 in large T antigen-expressing cells

The folding and pentamer assembly of the simian virus 40 (SV40) major capsid protein Vp1, which take place in the infected cytoplasm, have been shown to progress through disulfide-bonded Vp1 folding intermediates. In this report, we further demonstrate the existence of another category of Vp1 folding or assembly intermediates: the nonreducible, covalently modified mdVp1s. These species were present in COS-7 cells that expressed a recombinant SV40 Vp1, Vp1ΔC, through plasmid transfection. The mdVp1s persisted under cell and lysate treatment and SDS-PAGE conditions that are expected to have suppressed the formation of artifactual disulfide cross-links. As shown through a pulse-chase analysis, the mdVp1s were derived from the newly synthesized Vp1ΔC in the same time frame as Vp1's folding and oligomerization. The apparent covalent modifications occurred in the cytoplasm within the core region of Vp1 and depended on the coexpression of the SV40 large T antigen (LT) in the cells. Analogous covalently modified species were found with the expression of recombinant polyomavirus Vp1s and human papillomavirus L1s in COS-7 cells. Furthermore, the mdVp1s formed multiprotein complexes with LT, Hsp70, and Hsp40, and a fraction of the largest mdVp1, md4, was disulfide linked to the unmodified Vp1ΔC. Both mdVp1 formation and most of the multiprotein complex formation were blocked by a Vp1 folding mutation, C87A-C254A. Our observations are consistent with a role for LT in facilitating the folding process of SV40 Vp1 by stimulating certain covalent modifications of Vp1 or by recruiting certain cellular proteins.

Assembly of simple icosahedral viruses

Icosahedral viruses exhibit elegant pathways of capsid assembly and maturation regulated by symmetry principles. Assembly is a dynamic process driven by consecutive and genetically programmed morphogenetic interactions between protein subunits. The non-symmetric capsid subunits are gathered by hydrophobic contacts and non-covalent interactions in assembly intermediates, which serve as blocks to build a symmetric capsid. In some cases, non-symmetric interactions among intermediates are involved in assembly, highlighting the remarkable capacity of capsid proteins to fold into demanding conformations compatible with a closed protein shell. In this chapter, the morphogenesis of structurally simple icosahedral viruses, including representative members of the parvoviruses, picornaviruses or polyomaviruses as paradigms, is described in some detail. Icosahedral virus assembly may occur in different subcellular compartments and involve a panoplia of cellular and viral factors, chaperones, and protein modifications that, in general, are still poorly characterized. Mechanisms of viral genome encapsidation may imply direct interactions between the genome and the assembly intermediates, or active packaging into a preformed empty capsid. High stability of intermediates and proteolytic cleavages during viral maturation usually contribute to the overall irreversible character of the assembly process. These and other simple icosahedral viruses were pioneer models to understand basic principles of virus assembly, continue to be leading subjects of morphogenetic analyses, and have inspired ongoing studies on the assembly of larger viruses and cellular and synthetic macromolecular complexes.

Human epididymis protein-4 (HE-4): a novel cross-class protease inhibitor

Epididymal proteins represent the factors necessary for maturation of sperm and play a crucial role in sperm maturation. HE-4, an epididymal protein, is a member of whey acidic protein four-disulfide core (WFDC) family with no known function. A WFDC protein has a conserved WFDC domain of 50 amino acids with eight conserved cystine residue. HE-4 is a 124 amino acid long polypeptide with two WFDC domains. Here, we show that HE-4 is secreted in the human seminal fluid as a disulfide-bonded homo-trimer and is a cross-class protease inhibitor inhibits some of the serine, aspartyl and cysteine proteases tested using hemoglobin as a substrate. Using SPR we have also observed that HE-4 shows a significant binding with all these proteases. Disulfide linkages are essential for this activity. Moreover, HE-4 is N-glycosylated and highly stable on a wide range of pH and temperature. Taken together this suggests that HE-4 is a cross-class protease inhibitor which might confer protection against microbial virulence factors of proteolytic nature.

Principles of polyoma- and papillomavirus uncoating

Virus particles are vehicles for transmission of the viral genetic information between infected and uninfected cells and organisms. They have evolved to self-assemble, to serve as a protective shell for the viral genome during transfer, and to disassemble when entering a target cell. Disassembly during entry is a complex, multi-step process typically termed uncoating. Uncoating is triggered by multiple host-cell interactions. During cell entry, these interactions occur sequentially in different cellular compartments that the viruses pass through on their way to the site of replication. Here, we highlight the general principles of uncoating for two structurally related virus families, the polyoma- and papillomaviruses. Recent research indicates the use of different compartments and cellular interactions for uncoating despite their structural similarity.

Virus strategies for passing the nuclear envelope barrier

Viruses that replicate in the nucleus need to pass the nuclear envelope barrier during infection. Research in recent years indicates that the nuclear envelope is a major hurdle for many viruses. This review describes strategies to overcome this obstacle developed by seven virus families: herpesviridae, adenoviridae, orthomyxoviridae, lentiviruses (which are part of retroviridae), Hepadnaviridae, parvoviridae and polyomaviridae. Most viruses use the canonical nuclear pore complex (NPC) in order to get their genome into the nucleus. Viral capsids that are larger than the nuclear pore disassemble before or during passing through the NPC, thus allowing genome nuclear entry. Surprisingly, increasing evidence suggest that parvoviruses and polyomaviruses may bypass the nuclear pore by trafficking directly through the nuclear membrane. Additional studies are required for better understanding these processes. Since nuclear entry emerges as the limiting step in infection for many viruses, it may serve as an ideal target for antiviral drug development.

RNA encapsidation by SV40-derived nanoparticles follows a rapid two-state mechanism

Remarkably, uniform virus-like particles self-assemble in a process that appears to follow a rapid kinetic mechanism. The mechanisms by which spherical viruses assemble from hundreds of capsid proteins around nucleic acid, however, are yet unresolved. Using time-resolved small-angle X-ray scattering (TR-SAXS), we have been able to directly visualize SV40 VP1 pentamers encapsidating short RNA molecules (500mers). This assembly process yields T = 1 icosahedral particles comprised of 12 pentamers and one RNA molecule. The reaction is nearly one-third complete within 35 ms, following a two-state kinetic process with no detectable intermediates. Theoretical analysis of kinetics, using a master equation, shows that the assembly process nucleates at the RNA and continues by a cascade of elongation reactions in which one VP1 pentamer is added at a time, with a rate of approximately 10(9) M(-1) s(-1). The reaction is highly robust and faster than the predicted diffusion limit. The emerging molecular mechanism, which appears to be general to viruses that assemble around nucleic acids, implicates long-ranged electrostatic interactions. The model proposes that the growing nucleo-protein complex acts as an electrostatic antenna that attracts other capsid subunits for the encapsidation process.

The C-terminal cysteine annulus participates in auto-chaperone function for Salmonella phage P22 tailspike folding and assembly

Elongated trimeric adhesins are a distinct class of proteins employed by phages and viruses to recognize and bind to their host cells, and by bacteria to bind to their target cells and tissues. The tailspikes of E. coli phage K1F and Bacillus phage Ø29 exhibit auto-chaperone activity in their trimeric C-terminal domains. The P22 tailspike is structurally homologous to those adhesins. Though there are no disulfide bonds or reactive cysteines in the native P22 tailspikes, a set of C-terminal cysteines are very reactive in partially folded intermediates, implying an unusual local conformation in the domain. This is likely to be involved in the auto-chaperone function. We examined the unusual reactivity of C-terminal tailspike cysteines during folding and assembly as a potential reporter of auto-chaperone function. Reaction with IAA blocked productive refolding in vitro, but not off-pathway aggregation. Two-dimensional PAGE revealed that the predominant intermediate exhibiting reactive cysteine side chains was a partially folded monomer. Treatment with reducing reagent promoted native trimer formation from these species, consistent with transient disulfide bonds in the auto-chaperone domain. Limited enzymatic digestion and mass spectrometry of folding and assembly intermediates indicated that the C-terminal domain was compact in the protrimer species. These results indicate that the C-terminal domain of the P22 tailspike folds itself and associates prior to formation of the protrimer intermediate, and not after, as previously proposed. The C-terminal cysteines and triple β-helix domains apparently provide the staging for the correct auto-chaperone domain formation, needed for alignment of P22 tailspike native trimer.

N-acetylpenicillamine inhibits the replication of porcine reproductive and respiratory syndrome virus in vitro

Nitric oxide (NO) was proposed to be an important molecule against some microorganisms. In this study, we investigated the inhibitory effect of NO on the infection by porcine reproductive and respiratory syndrome virus (PRRSV) in vitro and the role of NO in the defense against PRRSV. Our results indicated that exogenous NO did not inhibit PRRSV infection. Unexpectedly, N-acetylpenicillamine (NAP), a commonly used compound as negative control for NO-producing reagents, inhibited PRRSV replication. Thus, the inhibition effect of NAP on PRRSV replication was further explored. We found that the maximal inhibition effect of NAP on PRRSV replication was achieved upon treatment 1 h after virus infection and the virus yield was reduced by approximately 50 fold in the presence of 400 μM NAP. An obvious inhibitory effect on viral RNA and protein synthesis was also observed. However, the inhibitory effect was only achieved at early phase of virus infection. The normal virus yield could be restored upon the removal of NAP treatment. The inhibitory effect might be caused by sulfhydryl-reducing capacity and metal chelating properties of NAP. These studies suggested that (i) NO production or NO synthase (NOS) expression profiling may not be a reliable index for the immune response to PRRSV; (ii) NAP could inhibit the replication of PRRSV.

A disulfide-bonded dimer of the core protein of hepatitis C virus is important for virus-like particle production

Hepatitis C virus (HCV) core protein forms the nucleocapsid of the HCV particle. Although many functions of core protein have been reported, how the HCV particle is assembled is not well understood. Here we show that the nucleocapsid-like particle of HCV is composed of a disulfide-bonded core protein complex (dbc-complex). We also found that the disulfide-bonded dimer of the core protein (dbd-core) is formed at the endoplasmic reticulum (ER), where the core protein is initially produced and processed. Mutational analysis revealed that the cysteine residue at amino acid position 128 (Cys128) of the core protein, a highly conserved residue among almost all reported isolates, is responsible for dbd-core formation and virus-like particle production but has no effect on the replication of the HCV RNA genome or the several known functions of the core protein, including RNA binding ability and localization to the lipid droplet. The Cys128 mutant core protein showed a dominant negative effect in terms of HCV-like particle production. These results suggest that this disulfide bond is critical for the HCV virion. We also obtained the results that the dbc-complex in the nucleocapsid-like structure was sensitive to proteinase K but not trypsin digestion, suggesting that the capsid is built up of a tightly packed structure of the core protein, with its amino (N)-terminal arginine-rich region being concealed inside.

The sigmaR regulon of Streptomyces coelicolor A32 reveals a key role in protein quality control during disulphide stress

Diamide is an artificial disulphide-generating electrophile that mimics an oxidative shift in the cellular thiol-disulphide redox state (disulphide stress). The Gram-positive bacterium Streptomyces coelicolor senses and responds to disulphide stress through the sigma(R)-RsrA system, which comprises an extracytoplasmic function (ECF) sigma factor and a redox-active anti-sigma factor. Known targets that aid in the protection and recovery from disulphide stress include the thioredoxin system and genes involved in producing the major thiol buffer mycothiol. Here we determine the global response to diamide in wild-type and sigR mutant backgrounds to understand the role of sigma(R) in this response and to reveal additional regulatory pathways that allow cells to cope with disulphide stress. In addition to thiol oxidation, diamide was found to cause protein misfolding and aggregation, which elicited the induction of the HspR heat-shock regulon. Although this response is sigma(R)-independent, sigma(R) does directly control Clp and Lon ATP-dependent AAA(+) proteases, which may partly explain the reduced ability of a sigR mutant to resolubilize protein aggregates. sigma(R) also controls msrA and msrB methionine sulphoxide reductase genes, implying that sigma(R)-RsrA is responsible for the maintenance of both cysteine and methionine residues during oxidative stress. This work shows that the sigma(R)-RsrA system plays a more significant role in protein quality control than previously realized, and emphasizes the importance of controlling the cellular thiol-disulphide redox balance.

The atomic structure of baculovirus polyhedra reveals the independent emergence of infectious crystals in DNA and RNA viruses

Baculoviruses are ubiquitous insect viruses well known for their use as bioinsecticides, gene therapy vectors, and protein expression systems. Overexpression of recombinant proteins in insect cell culture utilizes the strong promoter of the polyhedrin gene. In infected larvae, the polyhedrin protein forms robust intracellular crystals called polyhedra, which protect encased virions for prolonged periods in the environment. Polyhedra are produced by two unrelated families of insect viruses, baculoviruses and cypoviruses. The atomic structure of cypovirus polyhedra revealed an intricate packing of trimers, which are interconnected by a projecting N-terminal helical arm of the polyhedrin molecule. Baculovirus and cypovirus polyhedra share nearly identical lattices, and the N-terminal region of the otherwise unrelated baculovirus polyhedrin protein sequence is also predicted to be alpha-helical. These results suggest homology between the proteins and a common structural basis for viral polyhedra. Here, we present the 2.2-A structure of baculovirus polyhedra determined by x-ray crystallography from microcrystals produced in vivo. We show that the underlying molecular organization is, in fact, very different. Although both polyhedra have nearly identical unit cell dimensions and share I23 symmetry, the polyhedrin molecules are structurally unrelated and pack differently in the crystals. In particular, disulfide bonds and domain-swapped N-terminal domains stabilize the building blocks of baculovirus polyhedra and interlocking C-terminal arms join unit cells together. We show that the N-terminal projecting helical arms have different structural roles in baculovirus and cypovirus polyhedra and conclude that there is no structural evidence for a common evolutionary origin for both classes of polyhedra.

Transition from vesicles to small nanometer scaled vesicles, arising from the manipulation of curvature in dialkyl chain cationic/nonionic surfactant mixed aggregates by the addition of straight chain alkanols

The addition of straight chain alkanols to the dialkyl chain cationic/nonionic surfactant mixtures of dihexadecyl dimethyl ammonium bromide, DHDAB, and dodecaethylene monododecyl ether, C(12)E(12), has been used to manipulate the mean curvature of the self-assembled aggregates. This induces some significant structural changes and notably the formation of small unilamellar vesicles, nanometer scaled vesicles, L(sv). These structural changes have been measured and quantified using small angle neutron scattering, SANS. At a solution concentration of 25 mM, the DHDAB/C(12)E(12) mixtures have a structural evolution, from C(12)E(12) rich to DHDAB rich solution compositions, of small globular micelles, L(1), to micellar/vesicle coexistence, L(1)/L(v) or L(v)/L(1), to vesicle structures, L(v), bilamellar or multilamellar vesicles, blv or mlv. The impact of the addition of straight chain alkanols (in the range octanol to hexadecanol) depends upon the alkyl chain length and the amount of alcohol added. Furthermore, the effect of the addition of octanol and decanol appears to be distinctly different from that of the larger straight chain alkanols of dodecanol and hexadecanol. For the addition of octanol and decanol to C(12)E(12) rich DHDAB/C(12)E(12) mixtures, the alcohol is solubilized into the micellar core, and as the amount of alcohol added increases, significant micellar growth is ultimately observed. However, notably at intermediate DHDAB/C(12)E(12) solution compositions, in the region of L(1)/L(v) or L(v)/L(1) coexistance in the absence of alcohol, the addition of octanol or decanol promotes the formation of relatively small unilamellar vesicles, L(sv), nanometer sized vesicles, with a mean diameter in the range 70-140 A. For solutions that are rich in DHDAB, the addition of octanol or decanol results in a transition to L(v)/L(sv) coexistence and ultimately to L(v) formation. In contrast, the addition of the larger straight chain length alkanols, dodecanol or hexadecanol, to DHDAB/C(12)E(12) mixtures results in a somewhat different behavior. In this case, the addition of dodecanol or hexadecanol results in the transition from L(1) to L(1)/L(v) to L(v) occurring for solutions less rich in DHDAB than is observed in the absence of alcohol. That is, there is an enhanced tendency toward the formation of structures with a lower net curvature, either blv or mlv. Notably, for these mixtures, the small unilamellar nanometer scaled vesicle phase, L(sv), is absent.

The SV40 capsid is stabilized by a conserved pentapeptide hinge of the major capsid protein VP1

The simian virus 40 (SV40) outer shell is composed of 72 pentamers of VP1. The core of the VP1 monomer is a beta-barrel with jelly-roll topology and extending N- and C-terminal arms. A pentapeptide hinge, KNPYP, tethers the C-arm to the VP1 beta-barrel core. The five C-arms that extend from each pentamer insert into the neighbouring pentamers, tying them together through different types of interactions. In the mature virion, this element adopts either of six conformations according to their location in the capsid. We found that the hinge is conserved among 16 members of the Polyomaviridae, attesting to its importance in capsid assembly and/or structure. We have used site-directed mutagenesis to gain an understanding into the structural requirements of this element: Y299 was changed to A, F, and T, and P300 to A and G. The mutants showed reduction in viability to varying degrees. Unexpectedly, assembly was reduced only to a small extent. However, the data showed that the mutants were highly unstable. The largest effect was observed for mutations of P300, indicating a role of the proline in the virion structure. P300G was more unstable than P300A, indicating a requirement for rigidity of the pentapeptide hinge. Y299T and Y299A were more defective in viability than Y299F, highlighting the importance of an aromatic ring at this position. Structural inspection showed that this aromatic ring contacts C-arms of neighbouring pentamers. Computational modelling predicted loss of stability of the Y mutants in concordance with the experimental results. This study provides insights into the structural details of the pentapeptide hinge that are responsible for capsid stability.

Association of simian virus 40 vp1 with 70-kilodalton heat shock proteins and viral tumor antigens

Proper folding of newly synthesized viral proteins in the cytoplasm is a prerequisite for the formation of infectious virions. The major capsid protein Vp1 of simian virus 40 forms a series of disulfide-linked intermediates during folding and capsid formation. In addition, we report here that Vp1 is associated with cellular chaperones (HSP70) and a cochaperone (Hsp40) which can be coimmunoprecipitated with Vp1. Studies in vitro demonstrated the ATP-dependent interaction of Vp1 and cellular chaperones. Interestingly, viral cochaperones LT and ST were essential for stable interaction of HSP70 with the core Vp1 pentamer Vp1 (22-303). LT and ST also coimmunoprecipitated with Vp1 in vivo. In addition to these identified (co)chaperones, stable, covalently modified forms of Vp1 were identified for a folding-defective double mutant, C49A-C87A, and may represent a "trapped" assembly intermediate. By a truncation of the carboxyl arm of Vp1 to prevent the Vp1 folding from proceeding beyond pentamers, we detected several apparently modified Vp1 species, some of which were absent in cells transfected with the folding-defective mutant DNA. These results suggest that transient covalent interactions with known or unknown cellular and viral proteins are important in the assembly process.

Dynamic interactions of the UL16 tegument protein with the capsid of herpes simplex virus

The UL16 tegument protein of herpes simplex virus is conserved throughout the herpesvirus family. It has been reported to be capsid associated and may be involved in budding by providing an interaction with the membrane-bound UL11 protein. UL16 has been shown to be present in all the major locations that capsids are found (i.e., the nucleus, cytoplasm, and virions), but whether it is actually capsid associated in each of these has not been reported. Therefore, capsids were purified from each compartment, and it was found that UL16 was present on cytoplasmic but not nuclear capsids. In extracellular virions, the majority of UL16 (87%) was once again not capsid associated, which suggests that the interaction is transient during egress. Because herpes simplex virus (HSV) buds into the acidic compartment of the trans-Golgi network (TGN), the effect of pH on the interaction was examined. The amount of capsid-associated UL16 dramatically increased when extracellular virions were exposed to mildly acidic medium (pH 5.0 to 5.5), and this association was fully reversible. After budding into the TGN, capsid and tegument proteins also encounter an oxidizing environment, which is conducive to disulfide bond formation. UL16 contains 20 cysteines, including five that are conserved within a putative zinc finger. Any free cysteines that are involved in the capsid interaction or release mechanism of UL16 would be expected to be modified by N-ethylmaleimide, and, consistent with this, the amount of capsid-associated UL16 dramatically increased when virions were incubated with this compound. Taken together, these data suggest a transient interaction between UL16 and capsids, possibly modified in the acidic compartment of secretory vesicles and requiring a release mechanism that involves cysteines.

High cooperativity of the SV40 major capsid protein VP1 in virus assembly

SV40 is a small, non enveloped DNA virus with an icosahedral capsid of 45 nm. The outer shell is composed of pentamers of the major capsid protein, VP1, linked via their flexible carboxy-terminal arms. Its morphogenesis occurs by assembly of capsomers around the viral minichromosome. However the steps leading to the formation of mature virus are poorly understood. Intermediates of the assembly reaction could not be isolated from cells infected with wt SV40. Here we have used recombinant VP1 produced in insect cells for in vitro assembly studies around supercoiled heterologous plasmid DNA carrying a reporter gene. This strategy yields infective nanoparticles, affording a simple quantitative transduction assay. We show that VP1 assembles under physiological conditions into uniform nanoparticles of the same shape, size and CsCl density as the wild type virus. The stoichiometry is one DNA molecule per capsid. VP1 deleted in the C-arm, which is unable to assemble but can bind DNA, was inactive indicating genuine assembly rather than non-specific DNA-binding. The reaction requires host enzymatic activities, consistent with the participation of chaperones, as recently shown. Our results demonstrate dramatic cooperativity of VP1, with a Hill coefficient of ∼6. These findings suggest that assembly may be a concerted reaction. We propose that concerted assembly is facilitated by simultaneous binding of multiple capsomers to a single DNA molecule, as we have recently reported, thus increasing their local concentration. Emerging principles of SV40 assembly may help understanding assembly of other complex systems. In addition, the SV40-based nanoparticles described here are potential gene therapy vectors that combine efficient gene delivery with safety and flexibility.

Minor capsid proteins of simian virus 40 are dispensable for nucleocapsid assembly and cell entry but are required for nuclear entry of the viral genome

We investigated the roles of simian virus 40 capsid proteins in the viral life cycle by analyzing point mutants in Vp1 and Vp2/3, as well as a deletion mutant lacking the Vp2/3 coding sequence. The Vp1 mutants (V243E and L245E) and the Vp2/3 mutants (F157E-I158E and P164R-G165E-G166R) were previously shown to be defective in Vp1-Vp2/3 interaction and to be noninfectious or poorly infectious, respectively. Here, we show that all these point mutants form stable particles following DNA transfection into cells. The Vp2/3-mutant particles contained very low levels of Vp2/3, whereas the Vp1 mutant particles contained no detectable Vp2/3. As expected, the deletion mutant also formed particles that were noninfectious. We further characterized the two Vp1 point mutants and the deletion mutant. All three mutant particles comprised Vp1 and histone-associated viral DNA, and all were able to enter cells. However, the mutant complexes failed to associate with host importins (owing to the loss of the Vp2/3 nuclear localization signal), and the mutant viral DNAs prematurely dissociated from the Vp1s, suggesting that the nucleocapsids did not enter the nucleus. Consistently, all three mutant particles failed to express large T antigen. Together, our results demonstrate unequivocally that Vp2/3 is dispensable for the formation of nucleocapsids. Further, the nucleocapsids' ability to enter cells implies that Vp1 contains the major determinants for cell attachment and entry. We propose that the major role of Vp2/3 in infectivity is to mediate the nuclear entry of viral DNA.

Downregulation of protein disulfide isomerase inhibits infection by the mouse polyomavirus

Early stages of infection by the mouse polyomavirus have been studied using HeLa cells stably expressing small interfering RNA to protein disulfide isomerase (PDI). Infectibility measured by nuclear T antigen expression was reduced commensurately with the degree of PDI downregulation. Infectibility was restored by transfection with a plasmid expressing PDI but not with a control expressing catalytically inactive enzyme. Deconvolution microscopy using fluorescently labeled virus and cellular markers showed that virus reaches the endoplasmic reticulum (ER) normally in cells with reduced PDI but subsequently fails to exit the ER. Simian virus 40 infection was not inhibited in PDI-downregulated cells. The results are discussed in terms of structural differences between the two viruses and current knowledge of virus disassembly in the ER.

Hamster polyomavirus-derived virus-like particles are able to transfer in vitro encapsidated plasmid DNA to mammalian cells

The authentic major capsid protein 1 (VP1) of hamster polyomavirus (HaPyV) consists of 384 amino acid (aa) residues (42 kDa). Expression from an additional in-frame initiation codon located upstream from the authentic VP1 open reading frame (at position -4) might result in the synthesis of a 388 aa-long, amino-terminally extended VP1 (aa -4 to aa 384; VP1(ext)). In a plasmid-mediated Drosophila Schneider (S2) cell expression system, both VP1 derivatives as well as a VP1(ext) variant with an amino acid exchange of the authentic Met1Gly (VP1(ext-M1)) were expressed to a similar high level. Although all three proteins were detected in nuclear as well as cytoplasmic fractions, formation of virus-like particles (VLPs) was observed exclusively in the nucleus as confirmed by negative staining electron microscopy. The use of a tryptophan promoter-driven Escherichia coli expression system resulted in the efficient synthesis of VP1 and VP1(ext) and formation of VLPs. In addition, establishment of an in vitro disassembly/reassembly system allowed the encapsidation of plasmid DNA into VLPs. Encapsidated DNA was found to be protected against the action of DNase I. Mammalian COS-7 and CHO cells were transfected with HaPyV-VP1-VLPs carrying a plasmid encoding enhanced green fluorescent protein (eGFP). In both cell lines eGFP expression was detected indicating successful transfer of the plasmid into the cells, though at a still low level. Cesium chloride gradient centrifugation allowed the separation of VLPs with encapsidated DNA from "empty" VLPs, which might be useful for further optimization of transfection. Therefore, heterologously expressed HaPyV-VP1 may represent a promising alternative carrier for foreign DNA in gene transfer applications.

Chaperone-mediated in vitro disassembly of polyoma- and papillomaviruses

Hsp70 chaperones play a role in polyoma- and papillomavirus assembly, as evidenced by their interaction in vivo with polyomavirus capsid proteins at late times after virus infection and by their ability to assemble viral capsomeres into capsids in vitro. We studied whether Hsp70 chaperones might also participate in the uncoating reaction. In vivo, Hsp70 co-immunoprecipitated with polyomavirus virion VP1 at 3 h after infection of mouse cells. In vitro, prokaryotic and eukaryotic Hsp70 chaperones efficiently disassembled polyoma- and papillomavirus-like particles and virions in energy-dependent reactions. These observations support a role for cell chaperones in the disassembly of these viruses.

Size and position of truncations in the carboxy-terminal region of major capsid protein VP1 of hamster polyomavirus expressed in yeast determine its assembly capacity

The hamster polyomavirus major capsid protein VP1 was modified in its carboxy-terminal region by consecutive truncations and single amino acid exchanges. The ability of yeast-expressed VP1 variants to form virus-like particles (VLPs) strongly depended on the size and position of the truncation. VP1 variants lacking 21, 69, and 79 amino acid (aa) residues in their carboxy-terminal region efficiently formed VLPs similar to those formed by the unmodified VP1 (diameter 40-45 nm). In contrast, VP1 derivatives with carboxy-terminal truncations of 35 to 56 aa residues failed to form VLPs. VP1 mutants with a single A336G aa exchange or internal deletions of aa 335 to aa 346 and aa 335 to aa 363 resulted in the formation of VLPs of a smaller size (diameter 20 nm). These data indicate that certain parts of the carboxy-terminal region of VP1 are not essential for pentamer-pentamer interactions in the capsid, at least in the yeast expression system used.

SV40-immortalized human fibroblasts as a source of SV40 infectious virions

Human fibroblasts immortalized by Simian Virus 40 (SV40) are widely employed for cell and molecular biology model of study. Indeed, SV40 transmission to humans was believed to occur only under exceptional situations. The oncogenic potential of SV40 in laboratory animals is well established, whereas its involvement in human carcinogenesis is still a matter of active investigations. A recent report links SV40 exposure with the development of a brain tumor in a laboratory researcher. In previous studies, episomal viral DNA was detected in SV40 stably transformed and immortalized fibroblast cell lines. In this study, we report molecular and biological characterizations of SV40 DNA in human fibroblast cells. Our results indicate that SV40 is able to establish a persistent infection in long-term immortalized human fibroblasts, resulting in the production of an infectious viral progeny, which is able to infect both monkey and human cells. These data indicate that SV40-immortalized human fibroblasts may represent a source of SV40 infection. To avoid the SV40 infection, careful attention should be given by operators to this SV40-cell model of study.

Nuclear Transport of Trimeric Assembly Intermediates Exerts a Morphogenetic Control on the Icosahedral Parvovirus Capsid

The connection between nuclear transport and morphogenesis of a large macromolecular entity has been investigated using the karyophylic capsid of the parvovirus minute virus of mice (MVM) as a model. The VP1 (82 kDa) and VP2 (63 kDa) proteins forming the T = 1 icosahedral MVM capsid at the respective 1:5 molar ratio of synthesis, could be covalently cross-linked with dimethyl suberimidate into two types of oligomeric assemblies, which were present at stoichiometric amounts in infected cell extracts and purified viral particles. The larger species contained VP1 and corresponded in size (200 kDa) to a heterotrimer of one VP1 and two VP2 subunits. The smaller species contained VP2 only and corresponded in size (180 kDa) to a homotrimer. The introduction of bulky residues or the truncation of side-chains involved in multiple interactions at the interfaces between trimers of VPs in the MVM capsid, produced the accumulation of trimeric intermediates that were competent in nuclear translocation but not in capsid assembly. These results indicate that MVM maturation proceeds by cytoplasmic oligomerization of the capsid subunits into two types of trimers, which are the assembly intermediates competent to translocate across the nuclear membrane. Consistent with this conclusion, mutations at basic residues that inactivate a previously identified beta-stranded nuclear localization motif, which notably are not involved in inter or intra-subunit contacts, led to cytoplasmic retention of the two types of trimers, with no evidence for other assembly intermediates. Although a fraction of the VP1-containing trimers were translocated into the nucleus driven by the conventional nuclear transport signal of VP1 N terminus, their further assembly in the absence of the VP2-only trimers yielded large molecular mass amorphous aggregates. Therefore, the nuclear transport stoichiometry of assembly intermediates may exert a morphogenetic quality control on macromolecular complexes like the MVM capsid.

Thiol-disulphide interchange in tubulin: kinetics and the effect on polymerization

All 20 cysteine residues are accessible to disulphide reagents in the tubulin dimer, whereas only four are accessible in taxol-stabilized microtubules. Reaction rates with disulphide reagents are a function of the reagent, are decreased by G nucleotides, and increased with increase in pH and urea. With transient (stop-flow) kinetics, DTNB [5,5'-dithiobis-(2-nitrobenzoic acid)] and 2,2'-dithiodipyridine progress curves cannot be fitted by the sum of exponential terms based only on classes of cysteines. The mixed disulphide products react further to form both intra- and intermonomer disulphide bonds that can be reversed by reducing agents. With MMTS (methyl methanethiosulphonate) or ODNB (n-octyl-dithio-2-nitrobenzoate), virtually no protein-protein disulphide bonds are formed and the ODNB reaction can be given as the sum of three exponential terms with pseudo-first-order rate constants of 0.206, 0.069 and 0.010 s(-1) at pH 6.5, suggesting three classes of thiol reactivities. Limited cysteine substitution leads to only small changes in tryptophan or CD spectra, whereas complete substitution leads to loss of the helix content. MMTS-induced loss of SH groups leads to progressive increases in the critical concentration and loss of polymerization competence that can be reversed by assembly promoters such as higher protein concentration, taxol or high ionic strength. Under such conditions, the substituted tubulin forms protofilament-based structures such as microtubules, open tubules, sheets and/or bundles.

Structure and assembly of a T=1 virus-like particle in BK polyomavirus

In polyomaviruses the pentameric capsomers are interlinked by the long C-terminal arm of the structural protein VP1. The T=7 icosahedral structure of these viruses is possible due to an intriguing adaptability of this linker arm to the different local environments in the capsid. To explore the assembly process, we have compared the structure of two virus-like particles (VLPs) formed, as we found, in a calcium-dependent manner by the VP1 protein of human polyomavirus BK. The structures were determined using electron cryomicroscopy (cryo-EM), and the three-dimensional reconstructions were interpreted by atomic modeling. In the small VP1 particle, 26.4 nm in diameter, the pentameric capsomers form an icosahedral T=1 surface lattice with meeting densities at the threefold axes that interlinked three capsomers. In the larger particle, 50.6 nm in diameter, the capsomers form a T=7 icosahedral shell with three unique contacts. A folding model of the BKV VP1 protein was obtained by alignment with the VP1 protein of simian virus 40 (SV40). The model fitted well into the cryo-EM density of the T=7 particle. However, residues 297 to 362 of the C-terminal arm had to be remodeled to accommodate the higher curvature of the T=1 particle. The loops, before and after the C-terminal short helix, were shown to provide the hinges that allowed curvature variation in the particle shell. The meeting densities seen at the threefold axes in the T=1 particle were consistent with the triple-helix interlinking contact at the local threefold axes in the T=7 structure.

Pairs of Vp1 cysteine residues essential for simian virus 40 infection

Transient disulfide bonding occurs during the intracellular folding and pentamerization of simian virus 40 (SV40) major capsid protein Vp1 (P. P. Li, A. Nakanishi, S. W. Clark, and H. Kasamatsu, Proc. Natl. Acad. Sci. USA 99:1353-1358, 2002). We investigated the requirement for Vp1 cysteine pairs during SV40 infection. Our analysis identified three Vp1 double-cysteine mutant combinations that abolished viability as assayed by plaque formation. Mutating the Cys49-Cys87 pair or the Cys87-Cys254 pair led to ineffective nuclear localization and diminished accumulation of the mutant Vp1s, and the defect extended in a dominant-negative manner to the wild-type minor capsid proteins Vp2/3 and an affinity-tagged recombinant Vp1 expressed in the same cells. Mutating the Cys87-Cys207 pair preserved the nuclear localization and normal accumulation of the capsid proteins but diminished the production of virus-like particles. Our results are consistent with a role for Cys49, Cys87, and Cys254 in the folding and cytoplasmic-nuclear trafficking of Vp1 and with a role for Cys87 and Cys207 in the assembly of infectious particles. These findings suggest that transient disulfide bond formation between certain Vp1 cysteine residues functions at two stages of SV40 infection: during Vp1 folding and oligomerization in the cytoplasm and during virion assembly in the nucleus.

Identification of Residues Important for DNA Binding in the Full-length Human Rad52 Protein

Human Rad52 (HsRad52) is a DNA-binding protein (418 residues) that promotes the catalysis of DNA double strand break repair by the Rad51 recombinase. HsRad52 self-associates to form ring-shaped oligomers as well as higher order complexes of these rings. Analysis of the structural and functional organization of protein domains suggests that many of the determinants of DNA binding lie within the N-terminal 85 residues. Crystal structures of two truncation mutants, HsRad52(1-212) and HsRad52(1-209) support the idea that this region makes up an important part of the DNA binding domain. Here, we report the results of saturating alanine scanning mutagenesis of the N-terminal domain of full-length HsRad52 in which we identify residues that are likely involved in direct contact with single-stranded DNA (ssDNA). Our results largely agree with the position of side-chains seen in the crystal structures but also suggest that certain DNA binding and cross-subunit interactions differ between the 11 subunit ring in the crystal structures of the truncation mutant proteins versus the seven subunit ring formed by full-length HsRad52.

Cys254 and Cys49/Cys87of simian virus 40 Vp1 are essential in formation of infectious virions

The SV40 capsid is composed of pentameric capsomeres of Vp1. We have previously shown that disulfide linkages at Vp1 Cys9, Cys104, and Cys207 are essential in formation of infectious virions. Here, the role of the remaining four cysteines was explored. Single, double, and quadruple cys --> ser mutant genomes at Vp1 Cys49, Cys87, Cys254, and Cys267 codons were generated and transfected into CV-1 cells. The quadruple mutant Vp1 continued to localize to the nucleus and to bind DNA, but resulted in no plaques. SV40Vp1.Cys254 was the only single mutant with complete defect in plaque formation. The double mutant at Vp1.Cys49.Cys87 showed complete defect in plaque formation, while single mutants at the two residues resulted in plaques, suggesting a cumulative effect. All mutants defective in plaque formation continued to localize viral proteins in the nucleus. Taken together, our results suggest that Cys254 and the Cys49/Cys87 combination are essential in late stages of infectious virion formation.

Contribution of cysteines to clathrin trimerization domain stability and mapping of light chain binding

The three-legged or triskelion shape of clathrin is critical for the formation of polyhedral lattices around clathrin-coated vesicles. Filamentous legs radiate from a common vertex, with amino acids 1550-1615 contributed by each leg to define the trimerization domain (Liu S-H, Wong ML, Craik CS, Brodsky FM. Cell 1995; 83: 257-267). Within this amino acid stretch there are 3 cysteines at positions 1565, 1569 and 1573 which are completely conserved in higher mammals from humans to C. elegans. The cysteine-to-serine mutation at position 1573 was observed to have the largest impact on clathrin structure and self-assembly. We have also found that Cysteine 1528 located near the boundary between the proximal region and trimerization domain mediated the formation of nonproductive clathrin aggregates when bound light chain subunits were removed. However, when light chains were added back, the ability of this cysteine to form disulfide bridges between individual clathrin molecules was blocked, suggesting bound light chain interacted with Cysteine 1528 to prevent aggregation. This new information serves to map the orientation of the light chain subunit in the vicinity of the trimerization domain and supports previous models that indicate involvement of the trimerization domain in LC binding (Chen C-Y, Reese ML, Hwang PK, Ota N, Agard D, Brodsky FM. EMBO J 2002; 21: 6072-6082; Pishvaee B, Munn A, Payne GS. EMBO J 1997; 16: 2227-2239).

Nonnative interactions between cysteines direct productive assembly of P22 tailspike protein

Nonnative disulfide bond formation can play a critical role in the assembly of disulfide bonded proteins. During the folding and assembly of the P22 tailspike protein, nonnative disulfide bonds form both in vivo and in vitro. However, the mechanism and identity of cysteine disulfide pairs remains elusive, particularly for P22 tailspike, which contains no disulfide bonds in its native, functional form. Understanding the interactions between cysteine residues is important for developing a mechanistic model for the role of nonnative cysteines in P22 tailspike assembly. Prior in vivo studies have suggested that cysteines 496, 613, and 635 are the most likely site for sulfhydryl reactivity. Here we demonstrate that these three cysteines are critical for efficient assembly of tailspike trimers, and that interactions between cysteine pairs lead to productive assembly of native tailspike.

The Structure of the Cys-rich Terminal Domain of Hydra Minicollagen, Which Is Involved in Disulfide Networks of the Nematocyst Wall

The minicollagens found in the nematocysts of Hydra constitute a family of invertebrate collagens with unusual properties. They share a common modular architecture with a central collagen sequence ranging from 14 to 16 Gly-X-Y repeats flanked by polyproline/hydroxyproline stretches and short terminal domains that show a conserved cysteine pattern (CXXXCXXXCXXX-CXXXCC). The minicollagen cysteine-rich domains are believed to function in a switch of the disulfide connectivity from intra- to intermolecular bonds during maturation of the capsule wall. The solution structure of the C-terminal fragment including a minicollagen cysteine-rich domain of minicollagen-1 was determined in two independent groups by 1H NMR. The corresponding peptide comprising the last 24 residues of the molecule was produced synthetically and refolded by oxidation under low protein concentrations. Both presented structures are identical in their fold and disulfide connections (Cys2-Cys18, Cys6-Cys14, and Cys10-Cys19) revealing a robust structural motif that is supposed to serve as the polymerization module of the nematocyst capsule.

P22 tailspike trimer assembly is governed by interchain redox associations

Though disulfide bonds are absent from P22 tailspike protein in its native state, a disulfide-bonded trimeric intermediate has been identified in the tailspike folding and assembly pathway in vitro. The formation of disulfide bonds is critical to efficient assembly of native trimers as mutations at C-terminal cysteines reduce or inhibit trimer formation. We investigated the effect of different redox folding environments on tailspike formation to discover if simple changes in reducing potential would facilitate trimer formation. Expression of tailspike in trxB cell lines with more oxidizing cytoplasms led to lower trimer yields; however, observed assembly rates were unchanged. In vitro, the presence of any redox buffer decreased the overall yield compared to non-redox buffered controls; however, the greatest yields of the native trimer were obtained in reducing rather than oxidizing environments at pH 7. Slightly faster trimer formation rates were observed in the redox samples at pH 7, perhaps by accelerating the reduction of the disulfide-bonded protrimer to the native trimer. These rates and the effects of the redox system were found to depend greatly on the pH of the refolding reaction. Oxidized glutathione (GSSG) trapped a tailspike intermediate, likely as a mixed disulfide. This trapped intermediate was able to form native trimer upon addition of dithiothreitol (DTT), indicating that the trapped intermediate is on the assembly pathway, rather than the aggregation pathway. Thus, the presence of redox agents interfered with the ability of the tailspike monomers to associate, demonstrating that disulfide associations play an important role during the assembly of this cytoplasmic protein.