1
|
Li G, Wang S, Zhu Z, Chen A, Liu S. Cam-based vibration-counter-balanced laser-induced fluorescence scanner for multiplexed capillary detection. Talanta 2019; 198:398-403. [PMID: 30876578 DOI: 10.1016/j.talanta.2019.01.128] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/26/2018] [Revised: 01/22/2019] [Accepted: 01/22/2019] [Indexed: 11/15/2022]
Abstract
Laser-induced fluorescence (LIF) rotary scanners have been successfully used for multiplexed capillary detection. However, these scanners have a limitation that the capillaries have to be assembled in a circular format, which can be inconvenient for certain applications. A linear LIF scanner works well for flat parallel capillary arrays, but motor accelerations/decelerations (for direction changes) and scanning head vibrations introduce high instrumental noises. The number of capillaries that can be scanned by a linear scanner is limited because of the above constraints. We have constructed a cam-based scanner in an attempt to address these issues. A cam-based scanner eliminates the motor accelerations/decelerations but not the scanning head vibrations. In this work, we attach a second scanning head to the cam on the opposite side of the first scanning head to counter-balance the mechanical vibrations. With this modification, we improve the limit of detection by more than 3 times (from 69 pM to 20 pM fluorescein). We also increase the capillary number capacity by more than 6 times; the total number of capillaries that can be scanned is 426 if 150-μm-o.d. capillaries are used or 320 if 200-μm-o.d. capillaries are used. To demonstrate the utility of this instrument, we assemble a 99-capillary array on one capillary holder and perform capillary electrophoresis of two fluorescent dyes; separations in all capillaries are successfully monitored simultaneously. We also apply it for detecting fluorescently labeled proteins resolved by 24 s-dimension capillaries in a chip-capillary hybrid device; two-dimensional separation results are nicely produced.
Collapse
Affiliation(s)
- Guanbin Li
- Department of Chemistry and Biochemistry, University of Oklahoma, 101 Stephenson Parkway, Norman, OK 73019, USA; School of Petrochemical Engineering, Lanzhou University of Technology, Lanzhou 730050, PR China
| | - Shili Wang
- Department of Chemistry and Biochemistry, University of Oklahoma, 101 Stephenson Parkway, Norman, OK 73019, USA; PURSPEC Technologies Inc., 1 E. Zhongguancun Road, Beijing 100084, PR China
| | - Zaifang Zhu
- Department of Chemistry and Biochemistry, University of Oklahoma, 101 Stephenson Parkway, Norman, OK 73019, USA; AB Sciex LLC, Brea, CA 92821, USA
| | - Apeng Chen
- Department of Chemistry and Biochemistry, University of Oklahoma, 101 Stephenson Parkway, Norman, OK 73019, USA; Department of Neurological Surgery, University of Pittsburgh, Pittsburgh, PA 15213, USA.
| | - Shaorong Liu
- Department of Chemistry and Biochemistry, University of Oklahoma, 101 Stephenson Parkway, Norman, OK 73019, USA.
| |
Collapse
|
2
|
Li Q, Chen P, Fan Y, Wang X, Xu K, Li L, Tang B. Multicolor Fluorescence Detection-Based Microfluidic Device for Single-Cell Metabolomics: Simultaneous Quantitation of Multiple Small Molecules in Primary Liver Cells. Anal Chem 2016; 88:8610-6. [DOI: 10.1021/acs.analchem.6b01775] [Citation(s) in RCA: 49] [Impact Index Per Article: 6.1] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/12/2023]
Affiliation(s)
- Qingling Li
- College of Chemistry, Chemical
Engineering and Materials Science, Collaborative Innovation Center
of Functionalized Probes for Chemical Imaging in Universities of Shandong,
Key Laboratory of Molecular and Nano Probes, Ministry of Education,
Shandong Provincial Key Laboratory of Clean Production of Fine Chemicals, Shandong Normal University, Jinan, 250014, P.R. China
| | - Peilin Chen
- College of Chemistry, Chemical
Engineering and Materials Science, Collaborative Innovation Center
of Functionalized Probes for Chemical Imaging in Universities of Shandong,
Key Laboratory of Molecular and Nano Probes, Ministry of Education,
Shandong Provincial Key Laboratory of Clean Production of Fine Chemicals, Shandong Normal University, Jinan, 250014, P.R. China
| | - Yuanyuan Fan
- College of Chemistry, Chemical
Engineering and Materials Science, Collaborative Innovation Center
of Functionalized Probes for Chemical Imaging in Universities of Shandong,
Key Laboratory of Molecular and Nano Probes, Ministry of Education,
Shandong Provincial Key Laboratory of Clean Production of Fine Chemicals, Shandong Normal University, Jinan, 250014, P.R. China
| | - Xu Wang
- College of Chemistry, Chemical
Engineering and Materials Science, Collaborative Innovation Center
of Functionalized Probes for Chemical Imaging in Universities of Shandong,
Key Laboratory of Molecular and Nano Probes, Ministry of Education,
Shandong Provincial Key Laboratory of Clean Production of Fine Chemicals, Shandong Normal University, Jinan, 250014, P.R. China
| | - Kehua Xu
- College of Chemistry, Chemical
Engineering and Materials Science, Collaborative Innovation Center
of Functionalized Probes for Chemical Imaging in Universities of Shandong,
Key Laboratory of Molecular and Nano Probes, Ministry of Education,
Shandong Provincial Key Laboratory of Clean Production of Fine Chemicals, Shandong Normal University, Jinan, 250014, P.R. China
| | - Lu Li
- College of Chemistry, Chemical
Engineering and Materials Science, Collaborative Innovation Center
of Functionalized Probes for Chemical Imaging in Universities of Shandong,
Key Laboratory of Molecular and Nano Probes, Ministry of Education,
Shandong Provincial Key Laboratory of Clean Production of Fine Chemicals, Shandong Normal University, Jinan, 250014, P.R. China
| | - Bo Tang
- College of Chemistry, Chemical
Engineering and Materials Science, Collaborative Innovation Center
of Functionalized Probes for Chemical Imaging in Universities of Shandong,
Key Laboratory of Molecular and Nano Probes, Ministry of Education,
Shandong Provincial Key Laboratory of Clean Production of Fine Chemicals, Shandong Normal University, Jinan, 250014, P.R. China
| |
Collapse
|
3
|
Jovanovich S, Bogdan G, Belcinski R, Buscaino J, Burgi D, Butts ELR, Chear K, Ciopyk B, Eberhart D, El-Sissi O, Franklin H, Gangano S, Gass J, Harris D, Hennessy L, Kindwall A, King D, Klevenberg J, Li Y, Mehendale N, McIntosh R, Nielsen B, Park C, Pearson F, Schueren R, Stainton N, Troup C, Vallone PM, Vangbo M, Woudenberg T, Wyrick D, Williams S. Developmental validation of a fully integrated sample-to-profile rapid human identification system for processing single-source reference buccal samples. Forensic Sci Int Genet 2015; 16:181-194. [PMID: 25621924 DOI: 10.1016/j.fsigen.2014.12.004] [Citation(s) in RCA: 30] [Impact Index Per Article: 3.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/25/2014] [Revised: 11/27/2014] [Accepted: 12/09/2014] [Indexed: 10/24/2022]
Abstract
UNLABELLED Short tandem repeat (STR) DNA typing is a global standard for human identification. Current practice involves highly trained forensic analysts, operating in a laboratory setting, using multiple instruments to process samples and analyze the data. Here, we report the developmental validation of a fully integrated and automated DNA profiling system, the RapidHIT® System, capable of producing up to five high quality STR profiles with full controls in approximately 90min using PowerPlex®16 HS RapidHIT chemistry. The system integrates all sample handling steps: starting from lysis of cells on buccal swabs or other buccal sample types through DNA extraction, normalization, amplification,capillary array electrophoresis, detection, and integrated software analysis. The results describe the developmental validation of the RapidHIT™ System for buccal samples processed with the DNA IQ™ extraction chemistry using a guandinium chaotropic agent and paramagnetic beads followed by amplification using a modified version of PowerPlex 16 HS chemistry (PowerPlex 16 HS RapidHIT chemistry), and capillary electrophoresis with manual review of genotyping data following interpretation guidelines. All processing from the buccal swab to generation and processing of the profile occurs on the RapidHIT platform. RESULT are concordant with traditional methods, with 88% first pass success rates for both the CODIS and PowerPlex 16 loci. Average peak height ratios were 0.89 for buccal swabs. The system produces full profiles from swabs with at least 176 ng of saliva DNA. Rapid DNA identification systems will significantly enhance capabilities for forensic labs, intelligence, defense, law enforcement, refugee and immigration applications, and kinship analysis.
Collapse
Affiliation(s)
- Stevan Jovanovich
- IntegenX Inc. 5720 Stoneridge Drive, Suite 300, Pleasanton, CA 94588-2739, USA.
| | - Greg Bogdan
- IntegenX Inc. 5720 Stoneridge Drive, Suite 300, Pleasanton, CA 94588-2739, USA
| | - Richard Belcinski
- IntegenX Inc. 5720 Stoneridge Drive, Suite 300, Pleasanton, CA 94588-2739, USA
| | - Jacklyn Buscaino
- IntegenX Inc. 5720 Stoneridge Drive, Suite 300, Pleasanton, CA 94588-2739, USA
| | - Dean Burgi
- IntegenX Inc. 5720 Stoneridge Drive, Suite 300, Pleasanton, CA 94588-2739, USA
| | - Erica L R Butts
- National Institute of Standards and Technology, Gaithersburg, MD 20899-8314, USA
| | - Kaiwan Chear
- IntegenX Inc. 5720 Stoneridge Drive, Suite 300, Pleasanton, CA 94588-2739, USA
| | - Brian Ciopyk
- IntegenX Inc. 5720 Stoneridge Drive, Suite 300, Pleasanton, CA 94588-2739, USA
| | - David Eberhart
- IntegenX Inc. 5720 Stoneridge Drive, Suite 300, Pleasanton, CA 94588-2739, USA
| | - Omar El-Sissi
- IntegenX Inc. 5720 Stoneridge Drive, Suite 300, Pleasanton, CA 94588-2739, USA
| | - Helen Franklin
- IntegenX Inc. 5720 Stoneridge Drive, Suite 300, Pleasanton, CA 94588-2739, USA
| | - Stefanie Gangano
- IntegenX Inc. 5720 Stoneridge Drive, Suite 300, Pleasanton, CA 94588-2739, USA
| | - Jennifer Gass
- IntegenX Inc. 5720 Stoneridge Drive, Suite 300, Pleasanton, CA 94588-2739, USA
| | - Dennis Harris
- IntegenX Inc. 5720 Stoneridge Drive, Suite 300, Pleasanton, CA 94588-2739, USA
| | - Lori Hennessy
- IntegenX Inc. 5720 Stoneridge Drive, Suite 300, Pleasanton, CA 94588-2739, USA
| | - Alex Kindwall
- IntegenX Inc. 5720 Stoneridge Drive, Suite 300, Pleasanton, CA 94588-2739, USA
| | - David King
- IntegenX Inc. 5720 Stoneridge Drive, Suite 300, Pleasanton, CA 94588-2739, USA
| | - Jim Klevenberg
- IntegenX Inc. 5720 Stoneridge Drive, Suite 300, Pleasanton, CA 94588-2739, USA
| | - Yuan Li
- IntegenX Inc. 5720 Stoneridge Drive, Suite 300, Pleasanton, CA 94588-2739, USA
| | - Neelima Mehendale
- IntegenX Inc. 5720 Stoneridge Drive, Suite 300, Pleasanton, CA 94588-2739, USA
| | - Roger McIntosh
- IntegenX Inc. 5720 Stoneridge Drive, Suite 300, Pleasanton, CA 94588-2739, USA
| | - Bill Nielsen
- IntegenX Inc. 5720 Stoneridge Drive, Suite 300, Pleasanton, CA 94588-2739, USA
| | - Charles Park
- IntegenX Inc. 5720 Stoneridge Drive, Suite 300, Pleasanton, CA 94588-2739, USA
| | - Francesca Pearson
- IntegenX Inc. 5720 Stoneridge Drive, Suite 300, Pleasanton, CA 94588-2739, USA
| | - Robert Schueren
- IntegenX Inc. 5720 Stoneridge Drive, Suite 300, Pleasanton, CA 94588-2739, USA
| | - Nancy Stainton
- IntegenX Inc. 5720 Stoneridge Drive, Suite 300, Pleasanton, CA 94588-2739, USA
| | - Charles Troup
- IntegenX Inc. 5720 Stoneridge Drive, Suite 300, Pleasanton, CA 94588-2739, USA
| | - Peter M Vallone
- National Institute of Standards and Technology, Gaithersburg, MD 20899-8314, USA
| | - Mattias Vangbo
- IntegenX Inc. 5720 Stoneridge Drive, Suite 300, Pleasanton, CA 94588-2739, USA
| | - Timothy Woudenberg
- IntegenX Inc. 5720 Stoneridge Drive, Suite 300, Pleasanton, CA 94588-2739, USA
| | - David Wyrick
- IntegenX Inc. 5720 Stoneridge Drive, Suite 300, Pleasanton, CA 94588-2739, USA
| | - Stephen Williams
- IntegenX Inc. 5720 Stoneridge Drive, Suite 300, Pleasanton, CA 94588-2739, USA
| |
Collapse
|
4
|
SOX9 regulates multiple genes in chondrocytes, including genes encoding ECM proteins, ECM modification enzymes, receptors, and transporters. PLoS One 2014; 9:e107577. [PMID: 25229425 PMCID: PMC4168005 DOI: 10.1371/journal.pone.0107577] [Citation(s) in RCA: 75] [Impact Index Per Article: 7.5] [Reference Citation Analysis] [Abstract] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/22/2014] [Accepted: 08/03/2014] [Indexed: 12/28/2022] Open
Abstract
The transcription factor SOX9 plays an essential role in determining the fate of several cell types and is a master factor in regulation of chondrocyte development. Our aim was to determine which genes in the genome of chondrocytes are either directly or indirectly controlled by SOX9. We used RNA-Seq to identify genes whose expression levels were affected by SOX9 and used SOX9 ChIP-Seq to identify those genes that harbor SOX9-interaction sites. For RNA-Seq, the RNA expression profile of primary Sox9flox/flox mouse chondrocytes infected with Ad-CMV-Cre was compared with that of the same cells infected with a control adenovirus. Analysis of RNA-Seq data indicated that, when the levels of Sox9 mRNA were decreased more than 8-fold by infection with Ad-CMV-Cre, 196 genes showed a decrease in expression of at least 4-fold. These included many cartilage extracellular matrix (ECM) genes and a number of genes for ECM modification enzymes (transferases), membrane receptors, transporters, and others. In ChIP-Seq, 75% of the SOX9-interaction sites had a canonical inverted repeat motif within 100 bp of the top of the peak. SOX9-interaction sites were found in 55% of the genes whose expression was decreased more than 8-fold in SOX9-depleted cells and in somewhat fewer of the genes whose expression was reduced more than 4-fold, suggesting that these are direct targets of SOX9. The combination of RNA-Seq and ChIP-Seq has provided a fuller understanding of the SOX9-controlled genetic program of chondrocytes.
Collapse
|
5
|
|
6
|
García T, Revenga-Parra M, Sobrino B, Carracedo A, Alonso C, Lorenzo E, Pariente F. Electrochemical DNA base pairs quantification and endonuclease cleavage detection. Biosens Bioelectron 2011; 27:40-5. [DOI: 10.1016/j.bios.2011.06.003] [Citation(s) in RCA: 10] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/31/2011] [Revised: 05/25/2011] [Accepted: 06/07/2011] [Indexed: 10/18/2022]
|
7
|
AL-Othman ZA, Ali I. NANO CAPILLARY ELECTROPHORESIS IN MICROCHIPS: A NEED OF THE PRESENT CENTURY. J LIQ CHROMATOGR R T 2011. [DOI: 10.1080/10826076.2011.566031] [Citation(s) in RCA: 8] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/20/2023]
Affiliation(s)
- Zeid A. AL-Othman
- a Department of Chemistry, College of Science , King Saud University , Riyadh, Kingdom of Saudi Arabia
| | - Imran Ali
- b Department of Chemistry , Jamia Millia Islamia, (Central University) , New Delhi, India
| |
Collapse
|
8
|
Mihály Z, Gyorffy B. [Next generation sequencing technologies (NGST) -- development and applications]. Orv Hetil 2011; 152:55-62. [PMID: 21177232 DOI: 10.1556/oh.2011.29007] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.2] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/19/2022]
Abstract
In the past ten years the development of next generation sequencing technologies brought a new era in the field of quick and efficient DNA sequencing. In our study we give an overview of the methodological achievements from Sanger's chain-termination sequencing in 1975 to those allowing real-time DNA sequencing today. Sequencing methods that utilize clonal amplicons for parallel multistrand sequencing comprise the basics of currently available next generation sequencing techniques. Nowadays next generation sequencing is mainly used for basic research in functional genomics, providing quintessential information in the meta-analyses of data from signal transduction pathways, onthologies, proteomics and metabolomics. Although next generation sequencing is yet sparsely used in clinical practice, cardiology, oncology and epidemiology already show an immense need for the additional knowledge obtained by this new technology. The main barrier of its spread is the lack of standardization of analysis evaluation methods, which obscure objective assessment of the results.
Collapse
Affiliation(s)
- Zsuzsanna Mihály
- Semmelweis Egyetem, Általános Orvostudományi Kar, I. Gyermekgyógyászati Klinika, Budapest, Bókay J. u. 53., 1083.
| | | |
Collapse
|
9
|
Nikcevic I, Piruska A, Wehmeyer KR, Seliskar CJ, Limbach PA, Heineman WR. Parallel separations using capillary electrophoresis on a multilane microchip with multiplexed laser-induced fluorescence detection. Electrophoresis 2010; 31:2796-803. [PMID: 20737446 PMCID: PMC3031587 DOI: 10.1002/elps.201000030] [Citation(s) in RCA: 5] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/08/2022]
Abstract
Parallel separations using CE on a multilane microchip with multiplexed LIF detection is demonstrated. The detection system was developed to simultaneously record data on all channels using an expanded laser beam for excitation, a camera lens to capture emission, and a CCD camera for detection. The detection system enables monitoring of each channel continuously and distinguishing individual lanes without significant crosstalk between adjacent lanes. Multiple analytes can be determined in parallel lanes within a single microchip in a single run, leading to increased sample throughput. The pK(a) determination of small molecule analytes is demonstrated with the multilane microchip.
Collapse
Affiliation(s)
| | | | | | | | | | - William R. Heineman
- To whom correspondence should be addressed. . Tel: (513) 556-9210. Fax: (513) 556-9239
| |
Collapse
|
10
|
Jenkins S, Gibson N. High-throughput SNP genotyping. Comp Funct Genomics 2010; 3:57-66. [PMID: 18628885 PMCID: PMC2447245 DOI: 10.1002/cfg.130] [Citation(s) in RCA: 53] [Impact Index Per Article: 3.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/12/2001] [Accepted: 11/19/2001] [Indexed: 12/24/2022] Open
Abstract
Whole genome approaches using single nucleotide polymorphism (SNP) markers have the
potential to transform complex disease genetics and expedite pharmacogenetics research.
This has led to a requirement for high-throughput SNP genotyping platforms.
Development of a successful high-throughput genotyping platform depends on coupling
reliable assay chemistry with an appropriate detection system to maximise efficiency with
respect to accuracy, speed and cost. Current technology platforms are able to deliver
throughputs in excess of 100 000 genotypes per day, with an accuracy of >99%, at a cost
of 20–30 cents per genotype. In order to meet the demands of the coming years, however,
genotyping platforms need to deliver throughputs in the order of one million genotypes per
day at a cost of only a few cents per genotype. In addition, DNA template requirements
must be minimised such that hundreds of thousands of SNPs can be interrogated using a
relatively small amount of genomic DNA. As such, it is predicted that the next generation
of high-throughput genotyping platforms will exploit large-scale multiplex reactions and
solid phase assay detection systems.
Collapse
Affiliation(s)
- Suzanne Jenkins
- R&D Genetics, AstraZeneca, Mereside, Alderley Park, Macclesfield, Cheshire SK10 4TG, UK.
| | | |
Collapse
|
11
|
Kaji N, Okamoto Y, Tokeshi M, Baba Y. Nanopillar, nanoball, and nanofibers for highly efficient analysis of biomolecules. Chem Soc Rev 2010; 39:948-56. [DOI: 10.1039/b900410f] [Citation(s) in RCA: 49] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
|
12
|
Zhang W, Lin S, Wang C, Hu J, Li C, Zhuang Z, Zhou Y, Mathies RA, Yang CJ. PMMA/PDMS valves and pumps for disposable microfluidics. LAB ON A CHIP 2009; 9:3088-94. [PMID: 19823724 DOI: 10.1039/b907254c] [Citation(s) in RCA: 87] [Impact Index Per Article: 5.8] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/05/2023]
Abstract
Poly(methyl methacrylate) (PMMA) is gaining in popularity in microfluidic devices because of its low cost, excellent optical transparency, attractive mechanical/chemical properties, and simple fabrication procedures. It has been used to fabricate micromixers, PCR reactors, CE and many other microdevices. Here we present the design, fabrication, characterization and application of pneumatic microvalves and micropumps based on PMMA. Valves and pumps are fabricated by sandwiching a PDMS membrane between PMMA fluidic channel and manifold wafers. Valve closing or opening can be controlled by adjusting the pressure in a displacement chamber on the pneumatic layer via a computer regulated solenoid. The valve provides up to 15.4 microL s(-1) at 60 kPa fluid pressure and seals reliably against forward fluid pressure as high as 60 kPa. A PMMA diaphragm pump can be assembled by simply connecting three valves in series. By varying valve volume or opening time, pumping rates ranging from nL to microL per second can be accurately achieved. The PMMA based valves and pumps were further tested in a disposable automatic nucleic acid extraction microchip to extract DNA from human whole blood. The DNA extraction efficiency was about 25% and the 260 nm/280 nm UV absorption ratio for extracted DNA was 1.72. Because of its advantages of inexpensive, facile fabrication, robust and easy integration, the PMMA valve and pump will find their wide application for fluidic manipulation in portable and disposable microfluidic devices.
Collapse
Affiliation(s)
- Wenhua Zhang
- Department of Chemical Biology, Key Laboratory of Analytical Sciences, College of Chemistry and Chemical Engineering, State Key Laboratory for Physical Chemistry of Solid Surface, and the Key Laboratory for Chemical Biology of Fujian Province, Xiamen University, Xiamen, 361005, China
| | | | | | | | | | | | | | | | | |
Collapse
|
13
|
Ross D, Kralj JG. Simple device for multiplexed electrophoretic separations using gradient elution moving boundary electrophoresis with channel current detection. Anal Chem 2009; 80:9467-74. [PMID: 19007187 DOI: 10.1021/ac801597e] [Citation(s) in RCA: 28] [Impact Index Per Article: 1.9] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
Abstract
A new microfluidic electrophoresis device and technique is described that is designed specifically for multiplexed, high-throughput separations. The device consists of an array of short (3 mm) capillaries connecting individual sample reservoirs to a common buffer reservoir. Each capillary in the array functions as both a separation channel and as a conductivity-based detection cell. The new technique is based upon the recently described gradient elution moving boundary electrophoresis (GEMBE) technique, which uses a combination of an electric field and buffer counterflow to achieve electrophoretic separations in short capillaries or microfluidic channels. A high voltage drives electrophoresis of the sample analytes through each separation channel. At the start of a separation, the bulk counterflow of buffer through the channel is high, and none of the analytes of interest can enter the channel. The counterflow is then gradually reduced until each analyte, in turn, is able to enter the channel where it is detected as a moving boundary or step. With very short capillaries, only one step at a time is present in each capillary, and the electric current through the channels can then be used as the detector signal, without any extra detector hardware. The current vs time signal for each channel is then smoothed and differentiated to produce a set of simultaneous electropherograms. Because there is no light source or other added hardware required for detection, the system is simple and can be easily and inexpensively scaled up to perform large numbers of simultaneous analyses. As a first demonstration, a 16-channel array device is used for high-throughput, time-series measurements of enzyme activity and inhibition.
Collapse
Affiliation(s)
- David Ross
- Biochemical Science Division, National Institute of Standards & Technology, Gaithersburg, Maryland 20899, USA
| | | |
Collapse
|
14
|
Microfluidic chip: Next-generation platform for systems biology. Anal Chim Acta 2009; 650:83-97. [DOI: 10.1016/j.aca.2009.04.051] [Citation(s) in RCA: 67] [Impact Index Per Article: 4.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/30/2008] [Revised: 04/16/2009] [Accepted: 04/27/2009] [Indexed: 12/30/2022]
|
15
|
Forster RE, Chiesl TN, Fredlake CP, White CV, Barron AE. Hydrophobically modified polyacrylamide block copolymers for fast, high-resolution DNA sequencing in microfluidic chips. Electrophoresis 2009; 29:4669-76. [PMID: 19053064 DOI: 10.1002/elps.200800353] [Citation(s) in RCA: 11] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/08/2022]
Abstract
By using a microfluidic electrophoresis platform to perform DNA sequencing, genomic information can be obtained more quickly and affordably than the currently employed capillary array electrophoresis instruments. Previous research in our group has shown that physically cross-linked, hydrophobically modified polyacrylamide matrices separate dsDNA more effectively than linear polyacrylamide (LPA) solutions. Expanding upon this work, we have synthesized a series of LPA-co-dihexylacrylamide block copolymers specifically designed to electrophoretically sequence ssDNA quickly and efficiently on a microfluidic device. By incorporating very small amounts of N,N-dihexylacrylamide, a hydrophobic monomer, these copolymer solutions achieved up to approximately 10% increases in average DNA sequencing read length over LPA homopolymer solutions of matched molar mass. Additionally, the inclusion of the small amount of hydrophobe does not significantly increase the polymer solution viscosities, relative to LPA solutions, so that channel loading times between the copolymers and the homopolymers are similar. The resulting polymer solutions are capable of providing enhanced sequencing separations in a short period of time without compromising the ability to rapidly load and unload the matrix from a microfluidic device.
Collapse
Affiliation(s)
- Ryan E Forster
- Department of Materials Science and Engineering, Northwestern University, Evanston, IL, USA
| | | | | | | | | |
Collapse
|
16
|
Kumagai H, Utsunomiya S, Nakamura S, Yamamoto R, Harada A, Kaji T, Hazama M, Ohashi T, Inami A, Ikegami T, Miyamoto K, Endo N, Yoshimi K, Toyoda A, Hattori M, Sakaki Y. Large-scale microfabricated channel plates for high-throughput, fully automated DNA sequencing. Electrophoresis 2009; 29:4723-32. [PMID: 19016243 DOI: 10.1002/elps.200800301] [Citation(s) in RCA: 7] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/20/2022]
Abstract
We have described a new DNA sequencing platform based on the Sanger chemistry, in which the large-scale microfabricated channel plates and electrophoretic system result in higher-throughput DNA sequencing. Three hundred and eighty-four channels are arranged in a fan-like shape on a 25x47 cm glass plate, on which 384 oval sample holes are connected to each channel coupled to the opposite anode access holes. Two microfabricated plates are set on the sequencing apparatus, in which sequencing electrophoresis is conducted on one plate and the preparation process is on another plate. Each sample hole is loaded with 2.3 microL volume of sample and injected into separation channels electrokinetically. High-quality sequencing data were acquired using the pUC18 template, achieving an average read-length of 1001 bases with 99% accuracy and a throughput of 5 Mbases per day per instrument. To assess the performance in actual sequencing field, the bacterial artificial chromosome shotgun library of the Pseudorca crassidens genome was sequenced, using 1/80 of the quantity of Sanger reagent (0.1 microL). We believe that this is the first demonstration of the useful performance of DNA sequencing using monolithic microfabricated devices with walk-away operation.
Collapse
|
17
|
Ali I, Aboul-Enein HY, Gupta VK. Microchip-Based Nano Chromatography and Nano Capillary Electrophoresis in Genomics and Proteomics. Chromatographia 2008. [DOI: 10.1365/s10337-008-0813-1] [Citation(s) in RCA: 18] [Impact Index Per Article: 1.1] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/20/2022]
|
18
|
Lee M, Lee JN, Kim J, Kim JH. Reversible capture of genomic DNA by a Nafion-coated electrode. Anal Biochem 2008; 380:335-7. [PMID: 18585996 DOI: 10.1016/j.ab.2008.06.007] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.1] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/25/2008] [Revised: 05/29/2008] [Accepted: 06/01/2008] [Indexed: 10/21/2022]
Abstract
A method in which an electrode itself is used as the sample preparation microchip is described. The gold electrode was coated with an ion-permeable polymer, Nafion, to prevent the permanent adsorption and destruction of DNA. The modified electrode was able to capture as much DNA as the bare gold electrode and to release the captured DNA effectively, whereas the bare gold electrode could not release bound DNA. The elution efficiency was greater than 70% for the Nafion-coated electrode, whereas it was less than 10% for the bare electrode. The DNA obtained was undamaged and could be amplified by polymerase chain reaction.
Collapse
Affiliation(s)
- Myoyong Lee
- Bio and Health Lab, Samsung Advanced Institute of Technology, Mt. 14-1, Nongseo-Dong, Giheung-Gu, Yongin-Si 449-712, South Korea
| | | | | | | |
Collapse
|
19
|
Dishinger JF, Kennedy RT. Multiplexed detection and applications for separations on parallel microchips. Electrophoresis 2008; 29:3296-305. [PMID: 18702055 PMCID: PMC2597776 DOI: 10.1002/elps.200800067] [Citation(s) in RCA: 21] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/09/2022]
Abstract
Much work has been performed since the development of the lab-on-a-chip concept that has brought microfabricated systems to the forefront of bioanalytical research. The success of using these microchips for performing complicated biological assays faster and cheaper than conventional methods has facilitated their emerging popularity among researchers. A recently exploited advantage of microfabricated technology has led to the creation of single wafers with multiple channel manifolds for high-throughput experiments. Efforts toward parallel microchip development have yielded fascinating new devices for chemical separations showing the potential for replacing conventional multiplexing techniques. This review will focus on recent work toward multiplexed separations on microdevices and complementary detection instrumentation.
Collapse
Affiliation(s)
| | - Robert T. Kennedy
- Department of Chemistry, University of Michigan, Ann Arbor, MI, USA
- Department of Pharmacology, University of Michigan, Ann Arbor, MI, USA
| |
Collapse
|
20
|
Fredlake CP, Hert DG, Kan CW, Chiesl TN, Root BE, Forster RE, Barron AE. Ultrafast DNA sequencing on a microchip by a hybrid separation mechanism that gives 600 bases in 6.5 minutes. Proc Natl Acad Sci U S A 2008; 105:476-81. [PMID: 18184818 PMCID: PMC2206561 DOI: 10.1073/pnas.0705093105] [Citation(s) in RCA: 55] [Impact Index Per Article: 3.4] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/01/2007] [Indexed: 01/17/2023] Open
Abstract
To realize the immense potential of large-scale genomic sequencing after the completion of the second human genome (Venter's), the costs for the complete sequencing of additional genomes must be dramatically reduced. Among the technologies being developed to reduce sequencing costs, microchip electrophoresis is the only new technology ready to produce the long reads most suitable for the de novo sequencing and assembly of large and complex genomes. Compared with the current paradigm of capillary electrophoresis, microchip systems promise to reduce sequencing costs dramatically by increasing throughput, reducing reagent consumption, and integrating the many steps of the sequencing pipeline onto a single platform. Although capillary-based systems require approximately 70 min to deliver approximately 650 bases of contiguous sequence, we report sequencing up to 600 bases in just 6.5 min by microchip electrophoresis with a unique polymer matrix/adsorbed polymer wall coating combination. This represents a two-thirds reduction in sequencing time over any previously published chip sequencing result, with comparable read length and sequence quality. We hypothesize that these ultrafast long reads on chips can be achieved because the combined polymer system engenders a recently discovered "hybrid" mechanism of DNA electromigration, in which DNA molecules alternate rapidly between repeating through the intact polymer network and disrupting network entanglements to drag polymers through the solution, similar to dsDNA dynamics we observe in single-molecule DNA imaging studies. Most importantly, these results reveal the surprisingly powerful ability of microchip electrophoresis to provide ultrafast Sanger sequencing, which will translate to increased system throughput and reduced costs.
Collapse
Affiliation(s)
| | | | | | | | - Brian E. Root
- Materials Science and Engineering, Northwestern University, Evanston, IL 60208
| | - Ryan E. Forster
- Materials Science and Engineering, Northwestern University, Evanston, IL 60208
| | | |
Collapse
|
21
|
Prospective et applications médicales. Ing Rech Biomed 2007. [DOI: 10.1016/j.rbmret.2007.11.008] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/20/2022]
|
22
|
Affiliation(s)
- Karel Klepárník
- Institute of Analytical Chemistry, Academy of Sciences of the Czech Republic, Veveří 97, CZ-602 00 Brno, Czech Republic
| | - Petr Boček
- Institute of Analytical Chemistry, Academy of Sciences of the Czech Republic, Veveří 97, CZ-602 00 Brno, Czech Republic
| |
Collapse
|
23
|
Lu JJ, Pu Q, Wang S, Liu S. A cam-based laser-induced fluorescence scanner for capillary array electrophoresis. Anal Chim Acta 2007; 590:98-103. [PMID: 17416228 DOI: 10.1016/j.aca.2007.03.034] [Citation(s) in RCA: 8] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/08/2006] [Revised: 02/17/2007] [Accepted: 03/13/2007] [Indexed: 11/20/2022]
Abstract
Capillary array electrophoresis (CAE) is an important high throughput analytical technique. Laser-induced fluorescence (LIF) has been the dominant detection method for CAE owing to its low limit of detection (LOD) and wide linear dynamic range (LDR). Linear LIF scanners were first used in CAE because linear motions of an objective match well with a common planar array of capillaries. A problem with linear scanners is that the motor is required accelerating/decelerating so that all capillaries can be properly scanned, which makes motion control complicated and reduces the duty cycle. Rotary scanners were developed to overcome this problem. While rotary scanners have been successfully applied in CAE, the capillaries have to be arranged in a circular format, which can be inconvenient in some cases. In this report, we describe a cam-based LIF scanner as an alternative technique for CAE detection. In this system, a rotary motor is mechanically linked with a capillary holder via a cam. During operation, the motor carries the cam in a rotary motion that drives an array of capillaries on the holder to move back and forth across the objective for fluorescence detection. Using this design, the capillaries can be parallel-arranged in a plane while the motor acceleration/deceleration is avoided. To demonstrate the feasibility of this approach, we constructed a prototype instrument with a constant-velocity scanning distance of approximately 10 mm, a scanning frequency of 3 Hz and a duty cycle of approximately 70%. The scanner exhibited a LOD of 69 pM of fluorescein and a LDR of 3.5 orders of magnitude. Multiplexed capillary SDS-PAGE was performed on this scanner for protein separations.
Collapse
Affiliation(s)
- Joann J Lu
- Department of Chemistry and Biochemistry, Texas Tech University, Lubbock, TX 79409, United States
| | | | | | | |
Collapse
|
24
|
Alonso A, Albarran C, Martín P, García P, Capilla J, García O, de la Rua C, Izaguirre N, Pereira F, Pereira L, Amorim A, Sancho M. Usefulness of microchip electrophoresis for the analysis of mitochondrial DNA in forensic and ancient DNA studies. Electrophoresis 2006; 27:5101-9. [PMID: 17120261 DOI: 10.1002/elps.200600331] [Citation(s) in RCA: 13] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/08/2022]
Abstract
We evaluate the usefulness of a commercially available microchip CE (MCE) device in different genetic identification studies performed with mitochondrial DNA (mtDNA) targets, including the haplotype analysis of HVR1 and HVR2 and the study of interspecies diversity of cytochrome b (Cyt b) and 16S ribosomal RNA (16S rRNA) mitochondrial genes in forensic and ancient DNA samples. The MCE commercial system tested in this study proved to be a fast and sensitive detection method of length heteroplasmy in cytosine stretches produced by 16 189T>C transitions in HVR1 and by 309.1 and 309.2 C-insertions in HVR2. Moreover, the quantitative analysis of PCR amplicons performed by LIF allowed normalizing the amplicon input in the sequencing reactions, improving the overall quality of sequence data. These quantitative data in combination with the quantification of genomic mtDNA by real-time PCR has been successfully used to evaluate the PCR efficiency and detection limit of full sequencing methods of different mtDNA targets. The quantification of amplicons also provided a method for the rapid evaluation of PCR efficiency of multiplex-PCR versus singleplex-PCR to amplify short HV1 amplicons (around 100 bp) from severely degraded ancient DNA samples. The combination of human-specific (Cyt b) and universal (16S rRNA) mtDNA primer sets in a single PCR reaction followed by MCE detection offers a very rapid and simple screening test to differentiate between human and nonhuman hair forensic samples. This method was also very efficient with degraded DNA templates from forensic hair and bone samples, because of its applicability to detect small amplicon sizes. Future possibilities of MCE in forensic DNA typing, including nuclear STRs and SNP profiling are suggested.
Collapse
MESH Headings
- Animals
- Bone and Bones/chemistry
- Cattle
- Cytochromes b/genetics
- DNA Fingerprinting/methods
- DNA, Mitochondrial/analysis
- DNA, Mitochondrial/genetics
- Dogs
- Electrophoresis, Microchip/methods
- Forensic Anthropology/methods
- Forensic Genetics/methods
- Hair/chemistry
- Haplotypes
- Humans
- Mice
- RNA, Ribosomal, 16S/genetics
- Rats
- Receptors, Vasoactive Intestinal Peptide, Type II/genetics
- Receptors, Vasoactive Intestinal Polypeptide, Type I/genetics
- Sequence Analysis, DNA
Collapse
Affiliation(s)
- Antonio Alonso
- Instituto Nacional de Toxicología y Ciencias Forenses, Servicio de Biología, Madrid, Spain.
| | | | | | | | | | | | | | | | | | | | | | | |
Collapse
|
25
|
El-Difrawy SA, Srivastava A, Gismondi EA, McKenna BK, Ehrlich DJ. Numerical model for DNA loading in microdevices: Stacking and autogating effects. Electrophoresis 2006; 27:3779-87. [PMID: 16960830 DOI: 10.1002/elps.200600088] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.2] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/09/2022]
Abstract
Many electrophoresis-based DNA sequencing and genotyping microdevices rely on field-driven effects to load and preconcentrate the sample. A quantitative model is developed for a broad class of electrophoresis-based microfabricated sample injectors. Quantitative predictions of DNA preconcentration are compared with experimental data and are shown to qualitatively reproduce the detailed time-evolving sample distribution in the injector. The model provides practical guidance on device and protocol design, in order to optimize this critical aspect of microfluidic devices.
Collapse
|
26
|
Lu JJ, Liu S. A robust cross-linked polyacrylamide coating for microchip electrophoresis of dsDNA fragments. Electrophoresis 2006; 27:3764-71. [PMID: 16960840 DOI: 10.1002/elps.200600201] [Citation(s) in RCA: 16] [Impact Index Per Article: 0.9] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/09/2022]
Abstract
Surface derivatization plays an important role in microchip electrophoresis. It not only enhances the resolution, but also improves the reproducibility. So far, the most popularly used derivatization method for glass microchannels is to covalently attach a layer of linear polyacrylamide (LPA) to the channel surfaces. However, LPA coating has two problems: incomplete coverage and limited lifetime. To address these issues, we have recently developed a cross-linked polyacrylamide (CPA) derivatization protocol and demonstrated it for high-resolution protein separations by CIEF, CGE, and CZE. In this report, we used this protocol to coat microchip channels and exhibited the reliability and robustness of CPA coating for microchip electrophoresis of DNA molecules. dsDNA fragments were used as our test samples. High resolutions were obtained for fragments ranging from 100 bp to 10 kpb. After more than 800 runs, the CPA-coated microchannels still performed well and comparable resolutions were maintained throughout these runs.
Collapse
Affiliation(s)
- Joann J Lu
- Department of Chemistry and Biochemistry, Texas Tech University, Lubbock, TX, USA
| | | |
Collapse
|
27
|
Fredlake CP, Hert DG, Mardis ER, Barron AE. What is the future of electrophoresis in large-scale genomic sequencing? Electrophoresis 2006; 27:3689-702. [PMID: 17031784 DOI: 10.1002/elps.200600408] [Citation(s) in RCA: 29] [Impact Index Per Article: 1.6] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/17/2022]
Abstract
Although a finished human genome reference sequence is now available, the ability to sequence large, complex genomes remains critically important for researchers in the biological sciences, and in particular, continued human genomic sequence determination will ultimately help to realize the promise of medical care tailored to an individual's unique genetic identity. Many new technologies are being developed to decrease the costs and to dramatically increase the data acquisition rate of such sequencing projects. These new sequencing approaches include Sanger reaction-based technologies that have electrophoresis as the final separation step as well as those that use completely novel, nonelectrophoretic methods to generate sequence data. In this review, we discuss the various advances in sequencing technologies and evaluate the current limitations of novel methods that currently preclude their complete acceptance in large-scale sequencing projects. Our primary goal is to analyze and predict the continuing role of electrophoresis in large-scale DNA sequencing, both in the near and longer term.
Collapse
Affiliation(s)
- Christopher P Fredlake
- Department of Chemical and Biological Engineering, Northwestern University, Evanston, IL, USA
| | | | | | | |
Collapse
|
28
|
Won JI. Recent advances in DNA sequencing by End-Labeled Free-Solution Electrophoresis (ELFSE). BIOTECHNOL BIOPROC E 2006. [DOI: 10.1007/bf02932028] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.2] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
|
29
|
Tourniaire G, Collins J, Campbell S, Mizomoto H, Ogawa S, Thaburet JF, Bradley M. Polymer microarrays for cellular adhesion. Chem Commun (Camb) 2006:2118-20. [PMID: 16703126 DOI: 10.1039/b602009g] [Citation(s) in RCA: 78] [Impact Index Per Article: 4.3] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
Microarray screening of polymer libraries for cellular adhesion was developed utilising a thin film of agarose to allow unsurpassed localisation of cell binding onto the array substrate and the discovery of cell specific polymers.
Collapse
|
30
|
Shen Z, Liu X, Long Z, Liu D, Ye N, Qin J, Dai Z, Lin B. Parallel analysis of biomolecules on a microfabricated capillary array chip. Electrophoresis 2006; 27:1084-92. [PMID: 16470779 DOI: 10.1002/elps.200500689] [Citation(s) in RCA: 40] [Impact Index Per Article: 2.2] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/09/2022]
Abstract
This paper focused on a self-developed microfluidic array system with microfabricated capillary array electrophoresis (mu-CAE) chip for parallel chip electrophoresis of biomolecules. The microfluidic array layout consists of two common reservoirs coupled to four separation channels connected to sample injection channel on the soda-lime glass substrate. The excitation scheme for distributing a 20 mW laser beam to separation channels in an array is achieved. Under the control of program, the sample injection and separation in multichannel can be achieved through six high-voltage modules' output. A CCD camera was used to monitor electrophoretic separations simultaneously in four channels with LIF detection, and the electropherograms can be plotted directly without reconstruction by additional software. Parallel multichannel electrophoresis of series biomolecules including amino acids, proteins, and nucleic acids was performed on this system and the results showed fine reproducibility.
Collapse
Affiliation(s)
- Zheng Shen
- Dalian Institute of Chemical Physics, Chinese Academy of Sciences, Dalian, P. R. China
| | | | | | | | | | | | | | | |
Collapse
|
31
|
Abstract
Demand for DNA sequence information has never been greater, yet current Sanger technology is too costly, time consuming, and labor intensive to meet this ongoing demand. Applications span numerous research interests, including sequence variation studies, comparative genomics and evolution, forensics, and diagnostic and applied therapeutics. Several emerging technologies show promise of delivering next-generation solutions for fast and affordable genome sequencing. In this review article, the DNA polymerase-dependent strategies of Sanger sequencing, single nucleotide addition, and cyclic reversible termination are discussed to highlight recent advances and potential challenges these technologies face in their development for ultrafast DNA sequencing.
Collapse
Affiliation(s)
- Michael L Metzker
- Human Genome Sequencing Center and Department of Molecular and Human Genetics, Baylor College of Medicine, Houston, Texas 77030, USA.
| |
Collapse
|
32
|
Abstract
CE on microchip is an emerging separation technique that has attracted wide attention and gained considerable popularity. Because of miniaturization of the separation format, CE on chip typically offers shorter analysis time and lower reagent consumption with potential development of portable analytical instrumentation. This review with 143 references is focused on proteins and peptides analysis, DNA separation including fragment sizing, genotyping, mutation detection and sequencing, and also the analysis of low-molecular-weight compounds, namely explosive residues and warfare agents, pharmaceuticals and drugs of abuse, and various small molecules in body fluids.
Collapse
|
33
|
Ferrari M, Cremonesi L, Bonini P, Stenirri S, Foglieni B. Molecular diagnostics by microelectronic microchips. Expert Rev Mol Diagn 2005; 5:183-92. [PMID: 15833048 DOI: 10.1586/14737159.5.2.183] [Citation(s) in RCA: 9] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [MESH Headings] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/08/2022]
Abstract
Molecular diagnostics is being revolutionized by the development of highly advanced technologies for DNA and RNA testing. One of the most important challenges is the integration of microelectronics to microchip-based nucleic acid technologies. The specific characteristics of these microsystems make the miniaturization and automation of any step of a molecular diagnostic procedure possible. This review describes the application of microelectronics to all the processes involved in a genetic test, particularly to sample preparation, DNA amplification and sequence variation detection.
Collapse
Affiliation(s)
- Maurizio Ferrari
- IRCCS Ospedale San Raffaele, Head of the Clinical Molecular Biology & Cytogenetics Laboratory, Diagnostica e Ricerca San Raffaele SPA, and Unit of Genomics for Diagnosis of Human Pathologies, via Olgettina 60, 20132 Milan, Italy.
| | | | | | | | | |
Collapse
|
34
|
Aborn JH, El-Difrawy SA, Novotny M, Gismondi EA, Lam R, Matsudaira P, McKenna BK, O'Neil T, Streechon P, Ehrlich DJ. A 768-lane microfabricated system for high-throughput DNA sequencing. LAB ON A CHIP 2005; 5:669-74. [PMID: 15915260 DOI: 10.1039/b501104c] [Citation(s) in RCA: 43] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/02/2023]
Abstract
A 768-lane DNA sequencing system based on microfluidic plates has been designed as a near-term successor to 96-lane capillary arrays. Electrophoretic separations are implemented for the first time in large-format (25 cm x 50 cm) microdevices, with the objective of proving realistic read length, parallelism, and the scaled sample requirements for long-read de novo sequencing. Two 384-lane plates are alternatively cycled between electrophoresis and regeneration via a robotic pipettor. A total of greater than 172000 bases, 99% accuracy (corresponding to quality score 20) is achieved for each iteration of a 384 lane plate. At current operating conditions, this implies a system throughput exceeding 4 megabases of raw sequence (Phred 20) per day on the new platform. Standard operation is at "1/32x" Sanger chemistry, equal to typical genome center operation on mature capillary array machines, and a 16-fold improvement in scaling relative to previous microfabricated devices. Experiments provide evidence that sample concentration can be further reduced to 1/256x Sanger chemistry in the microdevice. Life-testing indicates a usable life of >150 hours (more than 50 runs) for the 384 lane plates. The combined advances, particularly those in read length and sample requirement, directly address the cost model requirements for adaptation of the new technology as the next step beyond capillary array instruments.
Collapse
Affiliation(s)
- James H Aborn
- Whitehead Institute for Biomedical Research, Nine Cambridge Center, Cambridge, MA 02142, USA
| | | | | | | | | | | | | | | | | | | |
Collapse
|
35
|
Zhu L, Stryjewski WJ, Soper SA. Multiplexed fluorescence detection in microfabricated devices with both time-resolved and spectral-discrimination capabilities using near-infrared fluorescence. Anal Biochem 2005; 330:206-18. [PMID: 15203326 DOI: 10.1016/j.ab.2004.03.047] [Citation(s) in RCA: 26] [Impact Index Per Article: 1.4] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/25/2003] [Indexed: 11/26/2022]
Abstract
We examined the feasibility of using a two-color time-resolved detection scheme with microdevices for DNA sequencing applications. A home-built dual-color optical-fiber-based time-resolved near-infrared (IR) fluorescence microscope successfully coupled lifetime discrimination with color discrimination, increasing fluorescence multiplexing capabilities. The instrument was constructed by using two pulsed-diode lasers (680/780-nm excitation) and two avalanche photodiodes as the basic building blocks. The data were processed using electronics configured in a time-correlated single-photon counting format. The use of near-IR fluorescence detection greatly simplified the hardware and allowed low detection limits (< 0.1nM). We examined the separation of a single-base tract on a microchip and compared the performance with that of conventional capillary gel electrophoresis. The microchip was fabricated in glass and contained an effective separation length of 7.0 cm. It was found that, without incorporating a solid-phase reversible immobilization cleanup procedure, the calculated lifetime of the dye label on the microchip was longer and the standard deviation was larger than those of the same sample analyzed using capillary electrophoresis. Using cleanup steps, the accuracy and precision of the measurements improved. Lifetimes of four near-IR dyes (AlexaFluor680, IRD700, IRD800, and IRD40) used in this study were determined to be 986 ps (RSD=2.1%), 1551 ps (RSD=1.8%), 520 ps (RSD=3.3%), and 788 ps (RSD=4.9%), respectively, in a microchannel filled with poly(dimethylacrylamide) (POP-6) gel. The lifetimes calculated using maximum likelihood estimators provided favorable precision on the microchip, where small numbers of photocounts were collected. An M13mp18 template was sequenced on the microchip using a two-color two-lifetime format with POP-6 as the sieving polymer. Read lengths of 294 bp with calling accuracies of 90.8 and 83.7% were achieved in each color channel. The relatively low calling accuracy and the short read length resulted primarily from the short separation channel, which yielded low electrophoretic resolution.
Collapse
Affiliation(s)
- Li Zhu
- Department of Chemistry, 232 Choppin Hall, Louisiana State University, Baton Rouge, LA 70803-1804, USA
| | | | | |
Collapse
|
36
|
Llopis SD, Stryjewski W, Soper SA. Near-infrared time-resolved fluorescence lifetime determinations in poly(methylmethacrylate) microchip electrophoresis devices. Electrophoresis 2005; 25:3810-9. [PMID: 15565677 DOI: 10.1002/elps.200406054] [Citation(s) in RCA: 24] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/09/2022]
Abstract
High aspect-ratio microstructures were hot-embossed in polymer substrates with a molding tool fabricated using lithography/electroplating/forming (LIGA). The resulting devices were used for the electrophoretic separation of oligonucleotides labeled with near-infrared (near-IR) dyes. Near-IR time-resolved fluorescence was used as an identification method for the labeling dyes. The detection apparatus consisted of a pulsed laser diode operating at 680 nm, a single-photon avalanche diode, an integrated microscope, and a PC-board incorporating time-correlated single photon counting electronics. Investigation of the optical quality and amount of autofluorescence generated from different polymer substrates was carried out in the near-IR region for determining compatibility with time-resolved fluorescence. Our results revealed that of several poly(methylmethacrylate)(PMMA) substrates, brand Plexiglas offered minimal replication errors in the embossed features using appropriate embossing conditions with low background fluorescence contributions to the observed decay. Near-IR dye-labeled oligonucleotides were separated to determine the applicability of fluorescence lifetime discrimination between Cy5.5 (tauf = 930 ps) and IRD700 (tauf = 851 ps) labeling dyes during the microchip separation. These dyes were used to label T-fragments (thymine) of an M13mp18 ssDNA template. The DNA ladders were electrophoresed at 130 V/cm in a 4% linear polyacrylamide gel (LPA) gel matrix in a 9.5 cm long serpentine channel heated to 50 degrees C. The electropherogram revealed that the lifetimes could be accurately read well beyond 450 bases, although single-base pair resolution in the electropherogram was difficult to achieve due to potential solute-wall interactions in the polymer microdevice or the electroosmotic flow (EOF) properties of the device. The relative standard deviations secured for individual bands in the electropherogram were similar to those obtained using capillary gel electrophoresis, in spite of the lower load volume.
Collapse
Affiliation(s)
- Shawn D Llopis
- Louisiana State University, Department of Chemistry, Baton Rouge, LA 70803-1804, USA
| | | | | |
Collapse
|
37
|
Abstract
This review article with 116 references describes recent developments in the preparation of wall coatings for capillary electrophoresis (CE) on a microchip. It deals with both dynamic and permanent coatings and concentrates on the most frequently used microchip materials including glass, poly(methyl methacrylate), poly(dimethyl siloxane), polycarbonate, and poly(ethylene terephthalate glycol). Characterization of the channel surface by measuring electroosmotic mobility and water contact angle of the surface is included as well. The utility of the microchips with coated channels is demonstrated by examples of CE separations on these chips.
Collapse
|
38
|
Dang F, Shinohara S, Tabata O, Yamaoka Y, Kurokawa M, Shinohara Y, Ishikawa M, Baba Y. Replica multichannel polymer chips with a network of sacrificial channels sealed by adhesive printing method. LAB ON A CHIP 2005; 5:472-478. [PMID: 15791347 DOI: 10.1039/b417398h] [Citation(s) in RCA: 34] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/24/2023]
Abstract
Replica microchips for capillary array electrophoresis containing 10 separation channels (50 microm width, 50 microm depth and 100 microm pitch) and a network of sacrificial channels (100 microm width and 50 microm depth) were successfully fabricated on a poly(methyl methacrylate) (PMMA) substrate by injection molding. The strategy involved development of moving mask deep X-ray lithography to fabricate an array of channels with inclined channel sidewalls. A slight inclination of channel sidewalls, which can not be fabricated by conventional deep X-ray lithography, is highly required to ensure the release of replicated polymer chips from a mold. Moreover, the sealing of molded PMMA multichannel chips with a PMMA cover film was achieved by a novel bonding technique involving adhesive printing and a network of sacrificial channels. An adhesive printing process enables us to precisely control the thickness of an adhesive layer, and a network of sacrificial channels makes it possible to remove air bubbles and an excess adhesive, which are crucial to achieving perfect sealing of replica PMMA chips with well-defined channel and injection structures. A CCD camera equipped with an image intensifier was used to simultaneously monitor electrophoretic separations in ten micro-channels with laser-induced fluorescence detection. High-speed and high-throughput separations of a 100 bp DNA ladder and phi X174 Hae III DNA restriction fragments have been demonstrated using a 10-channel PMMA chip. The current work establishes the feasibility of mass production of PMMA multichannel chips at a cost-effective basis.
Collapse
Affiliation(s)
- F Dang
- Single-Molecule Bioanalysis Laboratory, National Institute of Advanced Industrial Science and Technology, Hayashi-cho 2217-14, Takamatsu 761-0395, Japan.
| | | | | | | | | | | | | | | |
Collapse
|
39
|
Abstract
High throughput and automation of nucleic acid analysis are required in order to exploit the information that has been accumulated from the Human Genome Project. Microfabricated analytical systems enable parallel sample processing, reduced analysis-times, low consumption of sample and reagents, portability, integration of various analytical procedures and automation. This review article discusses miniaturized analytical systems for nucleic acid amplification, separation by capillary electrophoresis, sequencing and hybridization. Microarrays are also covered as a new analytical tool for global analysis of gene expression. Thus. instead of studying the expression of a single gene or a few genes at a time we can now obtain the expression profiles of thousands of genes in a single experiment.
Collapse
Affiliation(s)
- Pierre J Obeid
- Department of Chemistry, University of Patras, Patras, Greece
| | | |
Collapse
|
40
|
Kitagawa F, Aizawa S, Otsuka K. Rapid Enantioseparation of 1-Aminoindan by Microchip Electrophoresis with Linear-Imaging UV Detection. ANAL SCI 2005; 21:61-5. [PMID: 15675518 DOI: 10.2116/analsci.21.61] [Citation(s) in RCA: 33] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/23/2022]
Abstract
Chiral separations of 1-aminoindan (AI) by cyclodextrin electrokinetic chromatography (CDEKC) were investigated on microfluidic quartz chips. By using a microchip electrophoresis (MCE) instrument equipped with a linear-imaging UV detector, the separation process of the enantiomeric compounds was observed. When sulfated beta-cyclodextrin was employed as a chiral selector, the baseline separation of AI could be achieved within 1 min with a high repeatability. The relative standard deviation of the migration time was less than 6%. The fastest separation was achieved in 14 s, utilizing a separation length of only 6.1 mm. These results show that the MCE analysis employing a linear imaging UV detector has a significant potential for fast chiral analysis.
Collapse
Affiliation(s)
- Fumihiko Kitagawa
- Department of Material Chemistry, Graduate School of Engineering, Kyoto University, Katsura, Nishikyo-ku, Kyoto 615-8510, Japan.
| | | | | |
Collapse
|
41
|
Affiliation(s)
- Fumihiko KITAGAWA
- Department of Material Chemistry, Graduate School of Engineering, Kyoto University
| | - Koji OTSUKA
- Department of Material Chemistry, Graduate School of Engineering, Kyoto University
| |
Collapse
|
42
|
Jindal R, Cramer SM. On-chip electrochromatography using sol–gel immobilized stationary phase with UV absorbance detection. J Chromatogr A 2004; 1044:277-85. [PMID: 15354449 DOI: 10.1016/j.chroma.2004.05.065] [Citation(s) in RCA: 46] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/30/2022]
Abstract
A chromatography column on a chip was fabricated by immobilizing reversed-phase stationary phase particles (5 microm, C4) using sol-gel technology. Channels were fabricated in quartz using photolithography and wet etching. Localization of the stationary phase was achieved by immobilizing the stationary phase at the desired location in the separation channel prior to bonding of the cover plate. Cross channel design was employed for gated injection. An optical fiber setup was developed for carrying out on-chip UV absorbance detection. The effective optical path length was theoretically determined for the trapezoidal shaped channel and the result was shown to match closely with the experimentally determined value. The effect of applied voltage on velocity was evaluated using thiourea as an unretained marker. Separation performance of the stationary phase was demonstrated by separation of three peptides (Trp-Ala, Leu-Trp and Trp-Trp) under isocratic chromatographic conditions.
Collapse
Affiliation(s)
- Rohit Jindal
- Howard P. Isermann Department of Chemical and Biological Engineering, Rensselaer Polytechnic Institute, Troy, NY 12180, USA
| | | |
Collapse
|
43
|
|
44
|
Ugaz VM, Elms RD, Lo RC, Shaikh FA, Burns MA. Microfabricated electrophoresis systems for DNA sequencing and genotyping applications: current technology and future directions. PHILOSOPHICAL TRANSACTIONS. SERIES A, MATHEMATICAL, PHYSICAL, AND ENGINEERING SCIENCES 2004; 362:1105-29. [PMID: 15306487 DOI: 10.1098/rsta.2003.1365] [Citation(s) in RCA: 15] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/07/2023]
Abstract
Many routine genomic-analysis assays rely on gel electrophoresis to perform size-selective fractionation of DNA fragments in the size range below 1 kb in length. Over the past decade, impressive progress has been made towards the development of microfabricated electrophoresis systems to conduct these assays in a microfluidic lab-on-a-chip format. Since these devices are inexpensive, require only nanolitre sample volumes, and do not rely on the availability of a pre-existing laboratory infrastructure, they are readily deployable in remote field locations for use in a variety of medical and biosensing applications. The design and construction of microfabricated electrophoresis devices poses a variety of challenges, including the need to achieve high-resolution separations over distances of a few centimetres or less, and the need to easily interface with additional microfluidic components to produce self-contained integrated DNA-analysis systems. In this paper, we review recent efforts to develop devices to satisfy these requirements and live up to the promise of fulfilling the growing need for inexpensive portable genomic-analysis equipment.
Collapse
Affiliation(s)
- Victor M Ugaz
- Department of Chemical Engineering, Texas A&M University, College Station, TX 77843, USA
| | | | | | | | | |
Collapse
|
45
|
Abstract
An electric field-free electroosmotic pump has been constructed and its pumping rate has been measured under various experimental conditions. The key component of the pump is an ion-exchange membrane grounding joint that serves two major functions: (i) to maintain fluid continuity between pump channels and microfluidic conduit and (ii) to ground the solution in the microfluidic channel at the joint through an external electrode, and hence to decouple the electric field applied to the pump channels from the rest of the microfluidic system. A theoretical model has been developed to calculate the pumping rates and its validity has been demonstrated.
Collapse
Affiliation(s)
- Shaorong Liu
- Department of Chemistry and Biochemistry, Texas Tech University, Lubbock, TX 79409, USA.
| | | | | |
Collapse
|
46
|
Paegel BM, Blazej RG, Mathies RA. Microfluidic devices for DNA sequencing: sample preparation and electrophoretic analysis. Curr Opin Biotechnol 2003; 14:42-50. [PMID: 12566001 DOI: 10.1016/s0958-1669(02)00004-6] [Citation(s) in RCA: 155] [Impact Index Per Article: 7.4] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/30/2022]
Abstract
Modern DNA sequencing 'factories' have revolutionized biology by completing the human genome sequence, but in the race to completion we are left with inefficient, cumbersome, and costly macroscale processes and supporting facilities. During the same period, microfabricated DNA sequencing, sample processing and analysis devices have advanced rapidly toward the goal of a 'sequencing lab-on-a-chip'. Integrated microfluidic processing dramatically reduces analysis time and reagent consumption, and eliminates costly and unreliable macroscale robotics and laboratory apparatus. A microfabricated device for high-throughput DNA sequencing that couples clone isolation, template amplification, Sanger extension, purification, and electrophoretic analysis in a single microfluidic circuit is now attainable.
Collapse
Affiliation(s)
- Brian M Paegel
- Department of Chemistry, University of California, Berkeley, CA 94720, USA
| | | | | |
Collapse
|
47
|
Abstract
Miniaturized instruments have developed very quickly in the last decade. This review is focused on the microchip electrophoresis-based separation of DNA. Fundamentals, including the chip format, substrates and fabrication technologies, fluid control, as well as various detection methods, are summarized. Array electrophoresis microchip and the on-chip integration of electrophoresis with other systems are introduced as well. In addition, the application of microchip electrophoresis in DNA sizing, genetic analysis and DNA sequencing are also presented in this paper.
Collapse
Affiliation(s)
- Lihua Zhang
- Department of Medicinal Chemistry, Faculty of Pharmaceutical Sciences, The University of Tokushima, CREST, Japan Science and Technology Corporation (JST), Shomachi, Tokushima 770-8505, Japan.
| | | | | |
Collapse
|
48
|
Hof P, Ortmeier C, Pape K, Reitmaier B, Regenbogen J, Goppelt A, Halle JP. Digital analysis of cDNA abundance; expression profiling by means of restriction fragment fingerprinting. BMC Genomics 2002; 3:7. [PMID: 11882253 PMCID: PMC99051 DOI: 10.1186/1471-2164-3-7] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/11/2001] [Accepted: 03/06/2002] [Indexed: 11/10/2022] Open
Abstract
BACKGROUND Gene expression profiling among different tissues is of paramount interest in various areas of biomedical research. We have developed a novel method (DADA, Digital Analysis of cDNA Abundance), that calculates the relative abundance of genes in cDNA libraries. RESULTS DADA is based upon multiple restriction fragment length analysis of pools of clones from cDNA libraries and the identification of gene-specific restriction fingerprints in the resulting complex fragment mixtures. A specific cDNA cloning vector had to be constructed that governed missing or incomplete cDNA inserts which would generate misleading fingerprints in standard cloning vectors. Double stranded cDNA was synthesized using an anchored oligo dT primer, uni-directionally inserted into the DADA vector and cDNA libraries were constructed in E. coli. The cDNA fingerprints were generated in a PCR-free procedure that allows for parallel plasmid preparation, labeling, restriction digest and fragment separation of pools of 96 colonies each. This multiplexing significantly enhanced the throughput in comparison to sequence-based methods (e.g. EST approach). The data of the fragment mixtures were integrated into a relational database system and queried with fingerprints experimentally produced by analyzing single colonies. Due to limited predictability of the position of DNA fragments on the polyacrylamid gels of a given size, fingerprints derived solely from cDNA sequences were not accurate enough to be used for the analysis. We applied DADA to the analysis of gene expression profiles in a model for impaired wound healing (treatment of mice with dexamethasone). CONCLUSIONS The method proved to be capable of identifying pharmacologically relevant target genes that had not been identified by other standard methods routinely used to find differentially expressed genes. Due to the above mentioned limited predictability of the fingerprints, the method was yet tested only with a limited number of experimentally determined fingerprints and was able to detect differences in gene expression of transcripts representing 0.05% of the total mRNA population (e.g. medium abundant gene transcripts).
Collapse
Affiliation(s)
- Peter Hof
- Switch Biotech AG, Fraunhoferstr. 10, 82152 Martinsried, Germany
| | - Claudia Ortmeier
- Switch Biotech AG, Fraunhoferstr. 10, 82152 Martinsried, Germany
| | - Kirstin Pape
- Switch Biotech AG, Fraunhoferstr. 10, 82152 Martinsried, Germany
| | - Birgit Reitmaier
- Switch Biotech AG, Fraunhoferstr. 10, 82152 Martinsried, Germany
| | | | - Andreas Goppelt
- Switch Biotech AG, Fraunhoferstr. 10, 82152 Martinsried, Germany
| | | |
Collapse
|
49
|
Abstract
This review gives an overview of developments in the field of microchip analysis for clinical diagnostic and forensic applications. The approach chosen to review the literature is different from that in most microchip reviews to date, in that the information is presented in terms of analytes tested rather than microchip method. Analyte categories for which examples are presented include (i) drugs (quality control, seizures) and explosives residues, (ii) drugs and endogenous small molecules and ions in biofluids, (iii) proteins and peptides, and (iv) analysis of nucleic acids and oligonucleotides. Few cases of microchip analysis of physiological samples or other "real-world" matrices were found. However, many of the examples presented have potential application for these samples, especially with ongoing parallel developments involving integration of sample pretreatment onto chips and the use of fluid propulsion mechanisms other than electrokinetic pumping.
Collapse
Affiliation(s)
- Elisabeth Verpoorte
- Sensors, Actuators & Microsystems Laboratory, Institute of Microtechnology, University of Neuchâtel, Neuchâtel, Switzerland.
| |
Collapse
|
50
|
|