Systematic determination of absolute absorption cross-section of individual carbon nanotubes

Enhanced Thermal Conductivity of Single-Walled Carbon Nanotube with Axial Tensile Strain Enabled by Boron Nitride Nanotube Anchoring

Thermal conductivity measurements are conducted by optothermal Raman technique before and after the introduction of an axial tensile strain in a suspended single-walled carbon nanotube (SWCNT) through end-anchoring by boron nitride nanotubes (BNNTs). Surprisingly, the axial tensile strain (<0.4 %) in SWCNT results in a considerable enhancement of its thermal conductivity, and the larger the strain, the higher the enhancement. Furthermore, the thermal conductivity reduction with temperature is much alleviated for the strained nanotube compared to previously reported unstrained cases. The thermal conductivity of SWCNT increases with its length is also observed.

Multiwavelength Photothermal Imaging of Individual Single-Walled Carbon Nanotubes Suspended in a Solvent

Optical imaging of individual single-walled carbon nanotubes (SWCNTs) enables the characterization of heterogeneous SWCNT samples. However, previous measurement methods have targeted SWCNTs fixed on a substrate. In this study, absorption-contrast imaging of individual SWCNTs moving irregularly in a solvent was performed by simultaneous multiwavelength photothermal (PT) microscopy. Using this technique, heterogeneous samples containing semiconducting and metallic SWCNTs were characterized by absorption spectroscopy. The semiconducting and metallic SWCNTs were visualized in different colors in the obtained multiwavelength images due to their different absorption spectra. Statistical analysis of the multiwavelength signals revealed that semiconducting and metallic SWCNTs could be distinguished with more than 90% accuracy. Time-series PT imaging of the nanotube aggregates induced by salt addition was also conducted by performing single-nanotube measurements. Our study demonstrated that PT microscopy is a versatile technique for determining the composition and degree of aggregation of SWCNTs in liquid and polymeric media, which can promote the industrial application of such materials.

Soft-lock drawing of super-aligned carbon nanotube bundles for nanometre electrical contacts

The assembly of single-walled carbon nanotubes (CNTs) into high-density horizontal arrays is strongly desired for practical applications, but challenges remain despite myriads of research efforts. Herein, we developed a non-destructive soft-lock drawing method to achieve ultraclean single-walled CNT arrays with a very high degree of alignment (angle standard deviation of ~0.03°). These arrays contained a large portion of nanometre-sized CNT bundles, yielding a high packing density (~400 µm^-1) and high current carrying capacity (∼1.8 × 10⁸ A cm^-2). This alignment strategy can be generally extended to diverse substrates or sources of raw single-walled CNTs. Significantly, the assembled CNT bundles were used as nanometre electrical contacts of high-density monolayer molybdenum disulfide (MoS₂) transistors, exhibiting high current density (~38 µA µm^-1), low contact resistance (~1.6 kΩ µm), excellent device-to-device uniformity and highly reduced device areas (0.06 µm² per device), demonstrating their potential for future electronic devices and advanced integration technologies.

Interlayer Interactions in 1D Van der Waals Moiré Superlattices

Studying two-dimensional (2D) van der Waals (vdW) moiré superlattices and their interlayer interactions have received surging attention after recent discoveries of many new phases of matter that are highly tunable. Different atomistic registry between layers forming the inner and outer nanotubes can also form one-dimensional (1D) vdW moiré superlattices. In this review, experimental observations and theoretical perspectives related to interlayer interactions in 1D vdW moiré superlattices are summarized. The discussion focuses on double-walled carbon nanotubes (DWNTs), a model 1D vdW moiré system, and the authors highlight the new optical features emerging from the non-trivial strong interlayer coupling effect and the unique physics in 1D DWNTs. Future directions and questions in probing the intriguing physical phenomena in 1D vdW moiré superlattices such as, correlated physics in different 1D moiré systems beyond DWNTs are proposed and discussed.

Complete structural characterization of single carbon nanotubes by Rayleigh scattering circular dichroism

Non-invasive, high-throughput spectroscopic techniques can identify chiral indices (n,m) of carbon nanotubes down to the single-tube level^1-6. Yet, for complete characterization and to unlock full functionality, the handedness, the structural property associated with mirror symmetry breaking, also needs to be identified accurately and efficiently^7-14. So far, optical methods fail in the handedness characterization of single nanotubes because of the extremely weak chiroptical signals (roughly 10^-7) compared with the excitation light^15,16. Here we demonstrate the complete structure identification of single nanotubes in terms of both chiral indices and handedness by Rayleigh scattering circular dichroism. Our method is based on the background-free feature of Rayleigh scattering collected at an oblique angle, which enhances the nanotube's chiroptical signal by three to four orders of magnitude compared with conventional absorption circular dichroism. We measured a total of 30 single-walled carbon nanotubes including both semiconducting and metallic nanotubes and found that their absolute chiroptical signals show a distinct structure dependence, which can be qualitatively understood through tight-binding calculations. Our strategy enables the exploration of handedness-related functionality of single nanotubes and provides a facile platform for chiral discrimination and chiral device exploration at the level of individual nanomaterials.

Dielectric Engineering Boosts the Efficiency of Carbon Nanotube Photodiodes

Carbon nanotube (CNT) photodiodes are a promising system for high-efficiency photocurrent generation due to the strong Coulomb interactions that can drive carrier multiplication. If the Coulomb interactions are too strong, however, exciton formation can hamper photocurrent generation. Here, we explore, experimentally and theoretically, the effect of the environmental dielectric constant (ε_env) on the photocurrent generation process in CNTs. We study individual ultraclean CNTs of known chiral index in a vacuum or dry nitrogen gas (ε_env = 1) and oil (ε_env = 2.15). The efficiency of photocurrent generation improves by more than an order of magnitude in oil. Two mechanisms explain this improvement. First, the refractive index of the environment optimizes the interference between incident and reflected light. Second, exciton binding energies are reduced in oil, changing the relaxation pathways of photoexcited carriers. We varied the axial electric field in the pn junction from 4 to 14 V/μm. Our measurements at high field indicate that autoionization of second-subband excitons can coexist with carrier multiplication. Dielectric screening makes this coexistence regime more accessible and allows us to reach photocurrent quantum yields greater than 100%.

Quantum Interferences in Ultraclean Carbon Nanotubes

Electronic analogs of optical interferences are powerful tools to investigate quantum phenomena in condensed matter. In carbon nanotubes (CNTs), it is well established that an electronic Fabry-Perot interferometer can be realized. Other types of quantum interferences should also arise in CNTs, but have proven challenging to realize. In particular, CNTs have been identified as a system to realize the electronic analog of a Sagnac interferometer-the most sensitive optical interferometer. To realize this Sagnac effect, interference between nonidentical transmission channels in a single CNT must be observed. Here, we use suspended, ultraclean CNTs of known chiral index to study both Fabry-Perot and Sagnac electron interferences. We verify theoretical predictions for the behavior of Sagnac oscillations and the persistence of the Sagnac oscillations at high temperatures. As suggested by existing theoretical studies, our results show that these quantum interferences may be used for electronic structure characterization of carbon nanotubes and the study of many-body effects in these model one-dimensional systems.

Colors of Single-Wall Carbon Nanotubes

Although single-wall carbon nanotubes (SWCNTs) exhibit various colors in suspension, directly synthesized SWCNT films usually appear black. Recently, a unique one-step method for directly fabricating green and brown films has been developed. Such remarkable progress, however, has brought up several new questions. The coloration mechanism, potentially achievable colors, and color controllability of SWCNTs are unknown. Here, a quantitative model is reported that can predict the specific colors of SWCNT films and unambiguously identify the coloration mechanism. Using this model, colors of 466 different SWCNT species are calculated, which reveals a broad spectrum of potentially achievable colors of SWCNTs. The calculated colors are in excellent agreement with existing experimental data. Furthermore, the theory predicts the existence of many brilliantly colored SWCNT films, which are experimentally expected. This study shows that SWCNTs as a form of pure carbon, can display a full spectrum of vivid colors, which is expected to complement the general understanding of carbon materials.

Electronic Raman Scattering in Suspended Semiconducting Carbon Nanotube

The electronic Raman scattering (ERS) features of single-walled carbon nanotubes (SWNTs) can reveal a wealth of information about their electronic structures. Previously, the ERS processes have been exclusively reported in metallic SWNTs (M-SWNTs) and attributed to the inelastic scattering of photoexcited excitons by a continuum of low-energy electron-hole pairs near the Fermi level. Therefore, the ERS features have been thought to appear exclusively in M-SWNTs but not in semiconducting SWNTs (S-SWNTs), which are more desired in many application fields such as nanoelectronics and bioimaging. In this work, the experimental observation of the ERS features in suspended S-SWNTs is reported, the processes of which are accomplished via the available high-energy electron-hole pairs. The excitonic transition energies with an uncertainty in the order of ±1 meV can be directly obtained via the ERS spectra, compared to a typical uncertainty of ±10 meV in conventional electronic spectroscopies. The ERS features can facilitate further systematic studies on the properties of SWNT, both metallic and semiconducting, with defined chirality.

Horizontal Single-Walled Carbon Nanotube Arrays: Controlled Synthesis, Characterizations, and Applications

Single-walled carbon nanotubes (SWNTs) emerge as a promising material to advance carbon nanoelectronics. However, synthesizing or assembling pure metallic/semiconducting SWNTs required for interconnects/integrated circuits, respectively, by a conventional chemical vapor deposition method or by an assembly technique remains challenging. Recent studies have shown significant scientific breakthroughs in controlled SWNT synthesis/assembly and applications in scaled field effect transistors, which are a critical component in functional nanodevices, thereby rendering the horizontal SWNT array an important candidate for innovating nanotechnology. This review provides a comprehensive analysis of the controlled synthesis, surface assembly, characterization techniques, and potential applications of horizontally aligned SWNT arrays. This review begins with the discussion of synthesis of horizontally aligned SWNTs with regulated direction, density, structure, and theoretical models applied to understand the growth results. Several traditional procedures applied for assembling SWNTs on target surface are also briefly discussed. It then discusses the techniques adopted to characterize SWNTs, ranging from electron/probe microscopy to various optical spectroscopy methods. Prototype applications based on the horizontally aligned SWNTs, such as interconnects, field effect transistors, integrated circuits, and even computers, are subsequently described. Finally, this review concludes with challenges and a brief outlook of the future development in this research field.

Electrostatic Field-Induced Oscillator Strength Focusing in Molecules

The development of light-harvesting devices based on molecular materials depends critically on the ability to focus the electronic oscillator strength of molecules into the UV-vis spectral window. Typical molecular chromophores have only about 1% of their total electronic oscillator strength in this spectral region and thus perform at a small fraction of their possible effectiveness. This theoretical study finds that the electronic oscillator strength of polyenes in the UV-vis region may be enhanced by 1 order of magnitude using electrostatic fields, motivating specific experimental studies of oscillator strength focusing. We find scaling relationships between the polyene length, the intensity of the applied field, and the field-induced increase in oscillator strength that are useful for the implementation of light-harvesting strategies based on polyenes.

Chirality Pure Carbon Nanotubes: Growth, Sorting, and Characterization

Single-walled carbon nanotubes (SWCNTs) have been attracting tremendous attention owing to their structure (chirality) dependent outstanding properties, which endow them with great potential in a wide range of applications. The preparation of chirality-pure SWCNTs is not only a great scientific challenge but also a crucial requirement for many high-end applications. As such, research activities in this area over the last two decades have been very extensive. In this review, we summarize recent achievements and accumulated knowledge thus far and discuss future developments and remaining challenges from three aspects: controlled growth, postsynthesis sorting, and characterization techniques. In the growth part, we focus on the mechanism of chirality-controlled growth and catalyst design. In the sorting part, we organize and analyze existing literature based on sorting targets rather than methods. Since chirality assignment and quantification is essential in the study of selective preparation, we also include in the last part a comprehensive description and discussion of characterization techniques for SWCNTs. It is our view that even though progress made in this area is impressive, more efforts are still needed to develop both methodologies for preparing ultrapure (e.g., >99.99%) SWCNTs in large quantity and nondestructive fast characterization techniques with high spatial resolution for various nanotube samples.

Extremely Efficient Photocurrent Generation in Carbon Nanotube Photodiodes Enabled by a Strong Axial Electric Field

Carbon nanotube (CNT) photodiodes have the potential to convert light into electrical current with high efficiency. However, previous experiments have revealed the photocurrent quantum yield (PCQY) to be well below 100%. In this work, we show that the axial electric field increases the PCQY of CNT photodiodes. Under optimal conditions, our data suggest PCQY > 100%. We studied, both experimentally and theoretically, CNT photodiodes at room temperature using optical excitation corresponding to the S₂₂, S₃₃, and S₄₄ exciton resonances. The axial electric field inside the pn junction was controlled using split gates that are capacitively coupled to the suspended CNT. Our results give new insight into the photocurrent generation pathways in CNTs and the field dependence and diameter dependence of PCQY.

Strength of carbon nanotubes depends on their chemical structures

Single-walled carbon nanotubes theoretically possess ultimate intrinsic tensile strengths in the 100-200 GPa range, among the highest in existing materials. However, all of the experimentally reported values are considerably lower and exhibit a considerable degree of scatter, with the lack of structural information inhibiting constraints on their associated mechanisms. Here, we report the first experimental measurements of the ultimate tensile strengths of individual structure-defined, single-walled carbon nanotubes. The strength depends on the chiral structure of the nanotube, with small-diameter, near-armchair nanotubes exhibiting the highest tensile strengths. This observed structural dependence is comprehensively understood via the intrinsic structure-dependent inter-atomic stress, with its concentration at structural defects inevitably existing in real nanotubes. These findings highlight the target nanotube structures that should be synthesized when attempting to fabricate the strongest materials.

Real-time vibrations of a carbon nanotube

The field of miniature mechanical oscillators is rapidly evolving, with emerging applications including signal processing, biological detection¹ and fundamental tests of quantum mechanics². As the dimensions of a mechanical oscillator shrink to the molecular scale, such as in a carbon nanotube resonator^3-7, their vibrations become increasingly coupled and strongly interacting^8,9 until even weak thermal fluctuations could make the oscillator nonlinear^10-13. The mechanics at this scale possesses rich dynamics, unexplored because an efficient way of detecting the motion in real time is lacking. Here we directly measure the thermal vibrations of a carbon nanotube in real time using a high-finesse micrometre-scale silicon nitride optical cavity as a sensitive photonic microscope. With the high displacement sensitivity of 700 fm Hz^-1/2 and the fine time resolution of this technique, we were able to discover a realm of dynamics undetected by previous time-averaged measurements and a room-temperature coherence that is nearly three orders of magnitude longer than previously reported. We find that the discrepancy in the coherence stems from long-time non-equilibrium dynamics, analogous to the Fermi-Pasta-Ulam-Tsingou recurrence seen in nonlinear systems¹⁴. Our data unveil the emergence of a weakly chaotic mechanical breather¹⁵, in which vibrational energy is recurrently shared among several resonance modes-dynamics that we are able to reproduce using a simple numerical model. These experiments open up the study of nonlinear mechanical systems in the Brownian limit (that is, when a system is driven solely by thermal fluctuations) and present an integrated, sensitive, high-bandwidth nanophotonic interface for carbon nanotube resonators.

Measurement of complex optical susceptibility for individual carbon nanotubes by elliptically polarized light excitation

The complex optical susceptibility is the most fundamental parameter characterizing light-matter interactions and determining optical applications in any material. In one-dimensional (1D) materials, all conventional techniques to measure the complex susceptibility become invalid. Here we report a methodology to measure the complex optical susceptibility of individual 1D materials by an elliptical-polarization-based optical homodyne detection. This method is based on the accurate manipulation of interference between incident left- (right-) handed elliptically polarized light and the scattering light, which results in the opposite (same) contribution of the real and imaginary susceptibility in two sets of spectra. We successfully demonstrate its application in determining complex susceptibility of individual chirality-defined carbon nanotubes in a broad optical spectral range (1.6-2.7 eV) and under different environments (suspended and in device). This full characterization of the complex optical responses should accelerate applications of various 1D nanomaterials in future photonic, optoelectronic, photovoltaic, and bio-imaging devices.

Direct Proof of a Defect-Modulated Gap Transition in Semiconducting Nanotubes

Measurements of optical properties at a nanometer level are of central importance for the characterization of optoelectronic devices. It is, however, difficult to use conventional light-probe measurements to determine the local optical properties from a single quantum object with nanometrical inhomogeneity. Here, we successfully measured the optical gap transitions of an individual semiconducting carbon nanotube with defects by using a monochromated electron source as a probe. The optical conductivity extracted from an electron energy-loss spectrum for a certain type of defect presents a characteristic modification near the lowest excitation peak ( E₁₁), where excitons and nonradiative transitions, as well as phonon-coupled excitations, are strongly involved. Detailed line-shape analysis of the E₁₁ peak clearly shows different degrees of exciton lifetime shortening and electronic state modification according to the defect type.

Temperature Distribution and Thermal Conductivity Measurements of Chirality-Assigned Single-Walled Carbon Nanotubes by Photoluminescence Imaging Spectroscopy

It is expected that single-walled carbon nanotubes (SWCNTs) have high thermal conductivity along the tube axis and that the thermal conductivities depend on their structure, such as length, diameter, chirality (n, m), and so forth. Although many experimental measurements of the thermal conductivity have been reported, the SWCNT structure was not characterized sufficiently. In particular, the chirality was not assigned, and it was not confirmed whether SWCNT was isolated or not (bundled with multiplicate SWCNTs). Therefore, measured values widely vary (10¹ to 10⁴ W/(m·K)) so far. Here, we measured the thermal conductivity of chirality-assigned SWCNTs, which were individually suspended, by using photoluminescence (PL) imaging spectroscopy. The temperature distribution along the tube axis was obtained, and the temperature dependence of the thermal conductivity was measured in a wide-temperature range (from 350 to 1000 K). For (9, 8) SWCNTs with 10-12 μm in length, the thermal conductivity was 1166 ± 243 W/(m·K) at 400 K. The proposed PL imaging spectroscopy enables to measure the thermal conductivity of SWCNTs with high precision and without any contacts, and it is an effective method in the temperature distribution measurements of nanomaterials.

Real-Time Observation of Carbon Nanotube Etching Process Using Polarized Optical Microscope

Controllable synthesis of carbon nanotubes (CNTs) is of great importance in its further application, which attracts broad attention. As growth and etching are the two sides in the process of material crystallography and the control of the competition between them forms the foundation for modern technology of materials design and manufacture, the understanding on etching process of carbon nanotubes is still very unclear because technically it is of great challenge to characterize the dynamics in such small one-dimensional (1D) scale. Here the real-time investigation on the etching process of CNTs is reported, by the hot-wall chemical reactor equipped with a polarized optical microscope. It is discovered that the CNT etching behavior in air is totally of random, including the etching sites, termination sites, and structure dependence. Combining with the dynamic simulation, it is revealed that the random behavior reflects the unique "self-termination" phenomenon. A structure-independent etching propagation barrier of 2.4 eV is also obtained, which indicates that the etching propagation process still follows the conventional Kinetic Wulff construction theory. The results represent the new knowledge on the etching process in carbon nanotube and can contribute to its selective enrichment. Furthermore, the "self-termination" phenomenon may be a universal behavior in 1D process.

High-Throughput Optical Imaging and Spectroscopy of One-Dimensional Materials

Direct visualization of one-dimensional (1D) materials under an optical microscope in ambient conditions is of great significance for their characterizations and applications. However, it is full of challenges to achieve such goal due to their relative small size (ca. 1 nm in diameter) in the optical-diffraction-limited laser spot (ca. 1 μm in diameter). In this Concept article, we introduce a polarization-based optical homodyne detection method that can be used as a general strategy to obtain high-throughput, real-time, optical imaging and in situ spectroscopy of polarization-inhomogeneous 1D materials. We will use carbon nanotubes (CNTs) as an example to demonstrate the applications of such characterization with respect to the absorption signal of individual nanotubes, real-time imaging of individual nanotubes in devices, and statistical structure information of nanotube arrays.

Optical properties of monolayer tinene in electric fields

The absorption spectra of monolayer tinene in perpendicular electric fields are studied by the tight-binding model. There are three kinds of special structures, namely shoulders, logarithmical symmetric peaks and asymmetric peaks in the square-root form, corresponding to the optical excitations of the extreme points, saddle points and constant-energy loops. With the increasing field strength, two splitting shoulder structures, which are dominated by the parabolic bands of 5p z orbitals, come to exist because of the spin-split energy bands. The frequency of threshold shoulder declines to zero and then linearly grows. The third shoulder at 0.75~0.85 eV mainly comes from (5p x , 5p y ) orbitals. The former and the latter orbitals, respectively, create the saddle-point symmetric peaks near the M point, while they hybridize with one another to generate the loop-related asymmetric peaks. Tinene quite differs from graphene, silicene, and germanene. The special relationship among the multi-orbital chemical bondings, spin-orbital couplings and Coulomb potentials accounts for the feature-rich optical properties.

Fitting Single-Walled Carbon Nanotube Optical Spectra

In this work, a comprehensive methodology for the fitting of single-walled carbon nanotube absorption spectra is presented. Different approaches to background subtraction, choice of line profile, and calculation of full width at half-maximum are discussed both in the context of previous literature and the contemporary understanding of carbon nanotube photophysics. The fitting is improved by the inclusion of exciton-phonon sidebands, and new techniques to improve the individualization of overlapped nanotube spectra by exploiting correlations between the first- and second-order optical transitions and the exciton-phonon sidebands are presented. Consideration of metallic nanotubes allows an analysis of the metallic/semiconducting content, and a process of constraining the fit of highly congested spectra of carbon nanotube solid films according to the spectral weights of each (n, m) species in solution is also presented, allowing for more reliable resolution of overlapping peaks into single (n, m) species contributions.

Chirality-Controlled Synthesis and Applications of Single-Wall Carbon Nanotubes

Preparation of chirality-defined single-wall carbon nanotubes (SWCNTs) is the top challenge in the nanotube field. In recent years, great progress has been made toward preparing single-chirality SWCNTs through both direct controlled synthesis and postsynthesis separation approaches. Accordingly, the uses of single-chirality-dominated SWCNTs for various applications have emerged as a new front in nanotube research. In this Review, we review recent progress made in the chirality-controlled synthesis of SWCNTs, including metal-catalyst-free SWCNT cloning by vapor-phase epitaxy elongation of purified single-chirality nanotube seeds, chirality-specific growth of SWCNTs on bimetallic solid alloy catalysts, chirality-controlled synthesis of SWCNTs using bottom-up synthetic strategy from carbonaceous molecular end-cap precursors, etc. Recent major progresses in postsynthesis separation of single-chirality SWCNT species, as well as methods for chirality characterization of SWCNTs, are also highlighted. Moreover, we discuss some examples where single-chirality SWCNTs have shown clear advantages over SWCNTs with broad chirality distributions. We hope this review could inspire more research on the chirality-controlled preparation of SWCNTs and equally important inspire the use of single-chirality SWCNT samples for more fundamental studies and practical applications.

Single Nanotube Spectral Imaging To Determine Molar Concentrations of Isolated Carbon Nanotube Species

Electronic and biological applications of carbon nanotubes can be highly dependent on the species (chirality) of nanotube, purity, and concentration. Existing bulk methods, such as absorbance spectroscopy, can quantify sp2 carbon based on spectral bands, but nanotube length distribution, defects, and carbonaceous impurities can complicate quantification of individual particles. We present a general method to relate the optical density of a photoluminescent nanotube sample to the number of individual nanotubes. By acquiring 3-dimensional images of nanotubes embedded in a gel matrix with a reducing environment, we quantified all emissive nanotubes in a volume. Via spectral imaging, we assessed structural impurities and precisely determined molar concentrations of the (8,6) and (9,4) nanotube species. We developed an approach to obtain the molarity of any structurally enriched semiconducting single-walled carbon nanotube preparation on a per-nanotube basis.

In situ Characterization of Nanoparticles Using Rayleigh Scattering

We report a theoretical analysis showing that Rayleigh scattering could be used to monitor the growth of nanoparticles under arc discharge conditions. We compute the Rayleigh scattering cross sections of the nanoparticles by combining light scattering theory for gas-particle mixtures with calculations of the dynamic electronic polarizability of the nanoparticles. We find that the resolution of the Rayleigh scattering probe is adequate to detect nanoparticles as small as C60 at the expected concentrations of synthesis conditions in the arc periphery. Larger asymmetric nanoparticles would yield brighter signals, making possible to follow the evolution of the growing nanoparticle population from the evolution of the scattered intensity. Observable spectral features include characteristic resonant behaviour, shape-dependent depolarization ratio, and mass-dependent line shape. Direct observation of nanoparticles in the early stages of growth with unobtrusive laser probes should give insight on the particle formation mechanisms and may lead to better-controlled synthesis protocols.

(n,m) Assignments of Metallic Single-Walled Carbon Nanotubes by Raman Spectroscopy: The Importance of Electronic Raman Scattering

In this work, we report an accurate and convenient method that can be used to assign the chirality of all metallic single-walled carbon nanotubes (M-SWNTs). This method is designed based on the electronic Raman scattering (ERS) features, which are resonantly enhanced at the corresponding excitonic transition energies (M_ii⁺ and M_ii^-). Using this method, we are able to accurately determine the electronic property M_ii with the resolution of a vibrational Raman spectroscopy (∼0.3 meV), which is significantly higher than that of the electronic spectroscopies (∼3 meV). We use the M_ii splitting value, which is found insensitive to environmental changes, as a universal criteria for (n,m) assignments in various environments. As an illustrative example, simply using a commercialized Raman spectrometer with two laser lines (1.959 and 2.330 eV), we are able to unambiguously assign 18 metallic chiralities with M₁₁ in the 1.6-2.3 eV range in our samples. This method provides an accurate database of M_ii's in a similar way as photoluminescence excitation spectroscopy does for S_ii's. It can facilitate further systematic studies on the properties of M-SWNTs with defined chirality.

(n,m)-Specific Absorption Cross Sections of Single-Walled Carbon Nanotubes Measured by Variance Spectroscopy

A new method based on variance spectroscopy has enabled the determination of absolute absorption cross sections for the first electronic transition of 12 (n,m) structural species of semiconducting single-walled carbon nanotubes (SWCNTs). Spectrally resolved measurements of fluorescence variance in dilute bulk samples provided particle number concentrations of specific SWCNT species. These values were converted to carbon concentrations and correlated with resonant components in the absorbance spectrum to deduce (n,m)-specific absorption cross sections (absorptivities) for nanotubes ranging in diameter from 0.69 to 1.03 nm. The measured cross sections per atom tend to vary inversely with nanotube diameter and are slightly greater for structures of mod 1 type than for mod 2. Directly measured and extrapolated values are now available to support quantitative analysis of SWCNT samples through absorption spectroscopy.

High Conversion Efficiency Carbon Nanotube-Based Barrier-Free Bipolar-Diode Photodetector

Conversion efficiency (CE) is the most important figure of merit for photodetectors. For carbon nanotubes (CNT) based photodetectors, the CE is mainly determined by excitons dissociation and transport of free carriers toward contacts. While phonon-assisted exciton dissociation mechanism is effective in split-gate CNT p-n diodes, the CE is typically low in these devices, approximately 1-5%. Here, we evaluate the performance of a barrier-free bipolar diode (BFBD), which is basically a semiconducting CNT asymmetrically contacted by perfect n-type ohmic contact (Sc) and p-type ohmic contact (Pd) at the two ends of the diode. We show that the CE in short channel BFBD devices (e.g., 60 nm) is over 60%, and it reduces rapidly with increasing channel length. We find that the electric-field-assisted mechanism dominates the dissociation rate of excitons in BFBD devices at zero bias and thus the photocurrent generation process. By performing a time-resolved and spatial-resolved Monte Carlo simulation, we find that there exists an effective electron (hole)-rich region near the n-type (p-type) electrode in the asymmetrically contacted BFBD device, where the electric-field strength is larger than 17 V/μm and exciton dissociation is extremely fast (<0.1 ps), leading to very high CE in the BFBD devices.

Photocurrent Quantum Yield in Suspended Carbon Nanotube p-n Junctions

We study photocurrent generation in individual suspended carbon nanotube p-n junctions using spectrally resolved scanning photocurrent microscopy. Spatial maps of the photocurrent allow us to determine the length of the p-n junction intrinsic region, as well as the role of the n-type Schottky barrier. We show that reverse-bias operation eliminates complications caused by the n-type Schottky barrier and increases the length of the intrinsic region. The absorption cross-section of the CNT is calculated using an empirically verified model, and the effect of substrate reflection is determined using FDTD simulations. We find that the room temperature photocurrent quantum yield is approximately 30% when exciting the carbon nanotube at the S44 and S55 excitonic transitions. The quantum yield value is an order of magnitude larger than previous estimates.

Selective Dispersion of Highly Pure Large-Diameter Semiconducting Carbon Nanotubes by a Flavin for Thin-Film Transistors

Scalable and simple methods for selective extraction of pure, semiconducting (s) single-walled carbon nanotubes (SWNTs) is of profound importance for electronic and photovoltaic applications. We report a new, one-step procedure to obtain respective large-diameter s- and metallic (m)-SWNT enrichment purity in excess of 99% and 78%, respectively, via interaction between the aromatic dispersing agent and SWNTs. The approach utilizes N-dodecyl isoalloxazine (FC12) as a surfactant in conjunction with sonication and benchtop centrifugation methods. After centrifugation, the supernatant is enriched in s-SWNTs with less carbonaceous impurities, whereas precipitate is enhanced in m-SWNTs. In addition, the use of an increased centrifugal force enhances both the purity and population of larger diameter s-SWNTs. Photoinduced energy transfer from FC12 to SWNTs is facilitated by respective electronic level alignment. Owing to its peculiar photoreduction capability, FC12 can be employed to precipitate SWNTs upon UV irradiation and observe absorption of higher optical transitions of SWNTs. A thin-film transistor prepared from a dispersion of enriched s-SWNTs was fabricated to verify electrical performance of the sorted sample and was observed to display p-type conductance with an average on/off ratio over 10(6) and an average mobility over 10 cm(2)/V·s.

Microcavity-Integrated Carbon Nanotube Photodetectors

Carbon nanotubes (CNTs) are considered to be highly promising nanomaterials for multiwavelength, room-temperature infrared detection applications. Here, we demonstrate a single-tube diode photodetector monolithically integrated with a Fabry-Pérot microcavity. A ∼6-fold enhanced optical absorption can be achieved, because of the confined effect of the designed optical mode. Furthermore, taking advantage of Van-Hove-singularity band structures in CNTs, we open the possibility of developing chirality-specific (n,m) CNT-film-based signal detectors. Utilizing a concept of the "resonance and off-resonance" cavity, we achieved cavity-integrated chirality-sorted CNT-film detectors working at zero bias and resonance-allowed mode, for specific target signal detection. The detectors exhibited a higher suppression ratio until a power density of 0.07 W cm(-2) and photocurrent of 5 pA, and the spectral full width at half-maximum is ∼33 nm at a signal wavelength of 1200 nm. Further, with multiple array detectors aiming at different target signals integrated on a chip, a multiwavelength signal detector system can be expected to have applications in the fields of monitoring, biosensing, color imaging, signal capture, and on-chip or space information transfers. The approach can also bring other nanomaterials into on-chip or information optoelectronics, regardless of the available doping polarity.

Ultrafast nonlinear photoresponse of single-wall carbon nanotubes: a broadband degenerate investigation

Understanding of the fundamental photoresponse of carbon nanotubes has broad implications for various photonic and optoelectronic devices. Here, Z-scan and pump-probe spectroscopy performed across 600-2400 nm were combined to give a broadband 'degenerate' mapping of the nonlinear absorption properties of single-wall carbon nanotubes (SWNTs). In contrast to the views obtained from non-degenerate techniques, sizable saturable absorption is observed from the visible to the near-infrared range, including the spectral regions between semiconducting excitonic peaks and metallic tube transitions. In addition, the broadband mapping unambiguously reveals a photobleaching to photoinduced absorption transition feature within the first semiconducting excitonic band ∼2100 nm, quantitatively marking the long-wavelength cut-off for saturable absorption of the SWNTs investigated. Our findings present a much clearer physical picture of SWNTs' nonlinear absorption characteristics, and help provide updated design guidelines for SWNT based nonlinear optical devices.

High-Throughput Determination of Statistical Structure Information for Horizontal Carbon Nanotube Arrays by Optical Imaging

Optical multicolor imaging is used as a high-throughput statistical tool to determine the structure information of horizontally aligned carbon nanotube arrays on various substrates and in diverse environments. This high-throughput ability is achieved through the direct use of optical image information and an over 10-fold enhancement of the optical contrast by polarization manipulation.

Recent Progress in Obtaining Semiconducting Single-Walled Carbon Nanotubes for Transistor Applications

High purity semiconducting single-walled carbon nanotubes (s-SWCNTs) with a narrow diameter distribution are required for high-performance transistors. Achieving this goal is extremely challenging because the as-grown material contains mixtures of s-SWCNTs and metallic- (m-) SWCNTs with wide diameter distributions, typically inadequate for integrated circuits. Since 2000, numerous ex situ methods have been proposed to improve the purity of the s-SWCNTs. The majority of these techniques fail to maintain the quality and integrity of the s-SWCNTs with a few notable exceptions. Here, the progress in realizing high purity s-SWCNTs in as-grown and post-processed materials is highlighted. A comparison of transistor parameters (such as on/off ratio and field-effect mobility) obtained from test structures establishes the effectiveness of various methods and suggests opportunities for future improvements.

Ultraefficient Coupling of a Quantum Emitter to the Tunable Guided Plasmons of a Carbon Nanotube

We show that a single quantum emitter can efficiently couple to the tunable plasmons of a highly doped single-wall carbon nanotube (SWCNT). Plasmons in these quasi-one-dimensional carbon structures exhibit deep subwavelength confinement that pushes the coupling efficiency close to 100% over a very broad spectral range. This phenomenon takes place for distances and tube diameters comprising the nanometer and micrometer scales. In particular, we find a β factor ≈1 for QEs placed 1-100 nm away from SWCNTs that are just a few nanometers in diameter, while the corresponding Purcell factor exceeds 10(6).

A reference material of single-walled carbon nanotubes: quantitative chirality assessment using optical absorption spectroscopy

A quantitative chirality assessment of a SWCNT reference material is presented by using an enhanced method for absorption spectrum analysis.

Experimental Measurement of the Binding Configuration and Coverage of Chirality-Sorting Polyfluorenes on Carbon Nanotubes

Poly(9,9-dioctylfluorene-2,7-diyl) (PFO) exhibits exceptional (n,m) chirality and electronic-type selectivity for near-armchair semiconducting carbon nanotubes. To better understand and control the factors governing this behavior, we experimentally determine the surface coverage and binding configuration of PFO on nanotubes in solution using photoluminescence energy transfer and anisotropy measurements. The coverage increases with PFO concentration in solution, following Langmuir-isotherm adsorption behavior with cooperativity. The equilibrium binding constant (PFO concentration in solution at half coverage), KA, depends on (n,m) and is 1.16 ± 0.30, 0.93 ± 0.12, and 1.13 ± 0.26 mg mL(-1) for the highly selected (7,5), (8,6), and (8,7) species, respectively, and the corresponding PFO wrapping angle at low coverage is 12, 17, and 14 ± 2°, respectively. In contrast, the inferred KA for metallic nanotubes is nearly an order of magnitude greater, indicating that the semiconducting selectivity increases with decreasing PFO concentration. This understanding will quantitatively guide future experimental and computational efforts on electronic type-sorting carbon nanotubes.

Characterizing the chiral index of a single-walled carbon nanotube

The properties of single-walled carbon nanotubes (SWCNTs) mainly depend on their geometry. However, there are still formidable difficulties to determine the chirality of SWCNTs accurately. In this review, some efficient methods to characterize the chiral indices of SWCNTs are illuminated. These methods are divided into imaging techniques and spectroscopy techniques. With these methods, diameter, helix angle, and energy states can be measured. Generally speaking, imaging techniques have a higher accuracy and universality, but are time-consuming with regard to the sample preparation and characterization. The spectroscopy techniques are very simple and fast in operation, but these techniques can be applied only to the particular structure of the sample. Here, the principles and operations of each method are introduced, and a comprehensive understanding of each technique, including their advantages and disadvantages, is given. Advanced applications of some methods are also discussed. The aim of this review is to help readers to choose methods with the appropriate accuracy and time complexity and, furthermore, to put forward an idea to find new methods for chirality characterization.