Self-removal of condensed water on the legs of water striders

Gas Evolution in Water Electrolysis

Gas bubbles generated by the hydrogen evolution reaction and oxygen evolution reaction during water electrolysis influence the energy conversion efficiency of hydrogen production. Here, we survey what is known about the interaction of gas bubbles and electrode surfaces and the influence of gas evolution on practicable devices used for water electrolysis. We outline the physical processes occurring during the life cycle of a bubble, summarize techniques used to characterize gas evolution phenomena in situ and in practical device environments, and discuss ways that electrodes can be tailored to facilitate gas removal at high current densities. Lastly, we review efforts to model the behavior of individual gas bubbles and multiphase flows produced at gas-evolving electrodes. We conclude our review with a short summary of outstanding questions that could be answered by future efforts to characterize gas evolution in electrochemical device environments or by improved simulations of multiphase flows.

The loss of riparian vegetation along streams causes morphological divergences in functional traits of semiaquatic insects (Heteropteran: Gerromorpha) in the eastern Amazon

Understanding the effects of mining activities on Amazonian streams and their impact on aquatic communities is of paramount importance in the current context of resource overexploitation in society. In this study, we assessed the significance of the environment and interspecific interactions on the organization patterns of semiaquatic insect species in a mineral extraction region in the eastern Amazon. We utilized the morpho functional characteristics of 22 species from the suborder Gerromorpha (Heteropteran), considering both the abundance and sexual dimorphism of these species. Additionally, we quantified the density of riparian vegetation surrounding each stream to categorize sampling points and evaluate whether there are differences in species distribution patterns among categories. We sampled 16 sites, categorized into two treatments based on the percentage of riparian vegetation in forested and deforested areas located in the Capim River Basin. We did not find the action of environmental filters on the total assembly; however, we found significant morphological divergence for all the traits analyzed. On the other hand, the separation of streams into treatments with different portions of riparian vegetation showed that there are significant differences between them regarding species distribution patterns. Forested streams within a 500-m radius have species distributed over a larger area, indicating that these streams have greater resource availability or that species can use these resources more efficiently. Our results demonstrate the importance of riparian vegetation for the studied communities, as well as for mitigating the impacts caused by mining activities.

Damping the jump of coalescing droplets through substrate compliance

Sessile droplets coalescing on superhydrophobic surfaces result in spontaneous droplet jumping. Here, through coalescence experiments and fluid-structure interaction simulations for microliter droplets, we demonstrate that such droplet jumping can be damped if the underlying substrate is designed to be compliant. We show that a compliant superhydrophobic substrate with synergistic combinations of low stiffness and inertia deforms rapidly during the coalescence process to minimize the substrate reaction, thus diminishing the jumping velocity. A spring-mass system model for coalescing water droplets is proposed that successfully captures droplet motion and substrate deformation for a wide range of compliant superhydrophobic substrates. These insights can be leveraged to improve the process efficiency in multiple applications, such as designing compliant superhydrophobic substrates for minimizing the scattering of small, nanoliter-sized droplets during atmospheric water harvesting. Lastly, experiments on an exemplar butterfly wing show that droplet jumping velocity reduction can also manifest on natural superhydrophobic substrates due to their inherent compliance.

Janus Flexible Device with Microcone Channels for Sampling and Analysis of Biological Microfluidics

Controlling the spontaneous directional transport of droplets plays an important role in the application of microchemical reactions and microdroplet detection. Although the relevant technologies have been widely studied, the existing spontaneous droplet transport strategies still face problems of complex structure, single function, and poor flexibility. Inspired by the spontaneous droplet transport strategy in nature, an asymmetric wettability surface with microcone channels (AWS-MC) is prepared on a flexible fabric by combining surface modification and femtosecond laser manufacturing technology. On this surface, the capillary force and Laplace pressure induced by the wettability gradient and the geometric structure gradient drive the droplet transport from the hydrophobic surface to the hydrophilic surface. Notably, droplets in adjacent hydrophilic regions do not exchange substances even if the gap in the hydrophilic region is only 1 mm, which provides an ideal platform for numerous detections by a single drop. The droplet transport strategy does not require external energy and can adapt to the manipulation of various droplet types. Application of this surface in the blood of organisms is demonstrated. This work provides an effective method for microdroplet-directed self-transport and microdroplet detection.

Unidirectional transport of both wettable and nonwettable liquids on an asymmetrically concave structured surface

Unidirectional liquid transport (UDLT) has been widely used in various fields as an important process for transferring both mass and energy. However, UDLT driven by a structural gradient has been witnessed for a long time only in wettable liquids. For nonwettable liquids, UDLT can hardly proceed merely by a structural gradient. Herein, we propose an asymmetrically concave structured surface (AMC-surface), featuring tip-to-base periodically arranged pyramid-shaped concave structures with a certain degree of overlap, which enables the UDLT of both wettable and nonwettable liquids. For wettable liquids, the capillary force along each corner leads to the UDLT pointing toward the base side of the concave pyramid, while for nonwettable liquids, the UDLT is attributable to the static liquid pressure overwhelming the repulsive Laplace pressure induced by the asymmetric grooves and overlapping part. As a result, both wettable and nonwettable liquids transport spontaneously and unidirectionally on the AMC-surface with no energy input. Moreover, the concave structure endows good mechanical stability and can be easily prepared using a facile nail-punching approach over a large area. We also demonstrated its application in a continuous chemical reaction in a confined area. We envision that the unique UDLT behavior on the as-developed AMC-surface will shed new light on the programmable manipulation of various liquids.

Bioinspired Superhydrophobic Fibrous Materials

Natural fibers with robust water repellency play an important role in adapting organisms to various environments, which has inspired the development of artificial superhydrophobic fibrous materials with applications in self-cleaning, antifogging, water harvesting, heat exchanging, catalytic reactions, and microrobots. However, these highly textured surfaces (micro/nanotextured) suffer from frequent liquid penetration in high humidity and abrasion-induced destruction of the local environment. Herein, bioinspired superhydrophobic fibrous materials are reviewed from the perspective of the dimension scale of fibers. First, the fibrous dimension characteristics of several representative natural superhydrophobic fibrous systems are summarized, along with the mechanisms involved. Then, artificial superhydrophobic fibers are summarized, along with their various applications. Nanometer-scale fibers enable superhydrophobicity by minimizing the liquid-solid contact area. Micrometer-scale fibers are advantageous for enhancing the mechanical stability of superhydrophobicity. Micrometer-scale conical fibrous structures endow a Laplace force with a particular magnitude for self-removing condensed tiny dewdrops in highly humid air and stably trapping large air pockets underwater. Furthermore, several representative surface modification strategies for constructing superhydrophobic fibers are presented. In addition, several conventional applications of superhydrophobic systems are presented. It is anticipated that the review will inspire the design and fabrication of superhydrophobic fibrous systems.

Single Condensation Droplet Self-Ejection from Divergent Structures with Uniform Wettability

Coalescence-induced condensation droplet jumping has been extensively studied for anti-icing, condensation heat transfer, water harvesting, and self-cleaning. Another phenomenon that is gaining attention for potential enhancements is the self-ejection of individual droplets. However, the mechanism underlying this process remains elusive due to cases in which the abrupt detachment of an interface establishes an initial Laplace pressure difference. In this study, we investigate the self-ejection of individual droplets from uniformly hydrophobic microstructures with divergent geometries. We design, fabricate, and test arrays of truncated, nanostructured, and hydrophobic microcones arranged in a square pattern. High-speed microscopy reveals the dynamics of a single condensation droplet between four cones: after cycles of growth and stopped self-propulsion, the suspended droplet self-ejects without abrupt detachments. Through analytical modeling of the droplet in a conical pore as an approximation, we describe the slow isopressure growth phases and the rapid transients driven by surface energy release once a dynamic configuration is reached. Microcones with uniform wettability, in addition to being easier to fabricate, have the potential to enable the self-ejection of all nucleated droplets with a designed size, promising significant improvements in the aforementioned applications and others.

Pontederia crassipes inspired bottom overflow for fast and stable drainage

Fast and stable water drainage is essential for living organisms, drainage plane construction, and protection of infrastructure from damage during rainfall. Unlike traditional anti-overflow drainage methods that rely on hydrophobic or sharped edges, this study demonstrates a bottom overflow-induced drainage model inspired by the water path employed by Pontederia crassipes leaves, leading to fast and stable drainage. A superhydrophilic bottom surface guides water to overflow and pin at the bottom of a thin sheet, resulting in dripping at a higher frequency and reduced water retention. This bottom drainage idea assists large-scale thin sheets to function as efficient and stable drainage surfaces in simulated rain environments. The flexible thin sheet can also be feasibly attached to dusty substrates to effectively remove dusty rainwater with slight dust residue. The bioinspired approach presented herein suggests a promising potential for efficient water drainage on outdoor functional photovoltaic surfaces, such as solar panels and radomes, thus ensuring effective energy conversion and stable signal transmission.

Uniform and Persistent Jumping Detachment of Condensed Nanodroplets

Realizing jumping detachment of condensed droplets from solid surfaces at the smallest sizes possible is vital for applications such as antifogging/frosting and heat transfer. For instance, if droplets uniformly jump at sizes smaller than visible light wavelengths of 400-720 nm, antifogging issues could be resolved. In comparison, the smallest droplets experimentally observed so far to jump uniformly were around 16 μm in radius. Here, we show molecular dynamics (MD) simulations of persistent droplet jumping with a uniform radius down to only 3.6 nm on superhydrophobic thin-walled lattice (TWL) nanostructures integrated with superhydrophilic nanospots. The size cutoff is attributed to the preferential cross-lattice coalescence of island droplets. As an application, the MD results exhibit a 10× boost in the heat transfer coefficient (HTC), showing a -1 scaling law with the maximum droplet radius. We provide phase diagrams for jumping and wetting behaviors to guide the design of lattice structures with advanced antidew performance.

Water striders are impervious to raindrop collision forces and submerged by collapsing craters

Water striders are abundant in areas with high humidity and rainfall. Raindrops can weigh more than 40 times the adult water strider and some pelagic species spend their entire lives at sea, never contacting ground. Until now, researchers have not systematically investigated the survival of water striders when impacted by raindrops. In this experimental study, we use high-speed videography to film drop impacts on water striders. Drops force the insects subsurface upon direct contact. As the ensuing crater rebounds upward, the water strider is propelled airborne by a Worthington jet, herein called the first jet. We show the water strider's locomotive responses, low density, resistance to wetting when briefly submerged, and ability to regain a super-surface rest state, rendering it impervious to the initial impact. When pulled subsurface during a second crater formation caused by the collapsing first jet, water striders face the possibility of ejection above the surface or submersion below the surface, a fate determined by their position in the second crater. We identify a critical crater collapse acceleration threshold ∼ 5.7 gravities for the collapsing second crater which determines the ejection and submersion of passive water striders. Entrapment by submersion makes the water strider poised to penetrate the air-water interface from below, which appears impossible without the aid of a plastron and proper locomotive techniques. Our study is likely the first to consider second crater dynamics and our results translate to the submersion dynamics of other passively floating particles such as millimetric microplastics atop the world's oceans.

Heterogenous Slippery Surfaces: Enabling Spontaneous and Rapid Transport of Viscous Liquids with Viscosities Exceeding 10 000 mPa s

Superhydrophobic and slippery lubricant-infused surfaces have garnered significant attention for their potential to passively transport low-viscosity liquids like water (1 mPa s). Despite exciting progress, these designs have proven ineffective for transporting high-viscosity liquids such as polydimethylsiloxane (5500 mPa s) due to their inherent limitations imposed by the homogenous surface design, resulting in high viscous drags and compromised capillary forces. Here, a heterogenous water-infused divergent surface (WIDS) is proposed that achieves spontaneous, rapid, and long-distance transport of viscous liquids. WIDS reduces viscous drag by spatially isolating the viscous liquids and surface roughness through its heterogenous, slippery topological design, and generates capillary forces through its heterogenous wetting distributions. The essential role of surface heterogeneity in viscous liquid transport is theoretically and experimentally verified. Remarkably, such a heterogenous paradigm enables transporting liquids with viscosities exceeding 12 500 mPa s, which is two orders of magnitude higher than state-of-the-art techniques. Furthermore, this heterogenous design is generic for various viscous liquids and can be made flexible, making it promising for various systems that require viscous liquid management, such as micropatterning.

Overview of the design of bionic fine hierarchical structures for fog collection

Nature always uses its special wisdom to construct elegant and suitable schemes. Consequently, organisms in the flora and fauna are endowed with fine hierarchical structures (HS) to adapt to the harsh environment due to many years of evolution. Water is one of the most important resources; however, easy access to it is one the biggest challenges faced by human beings. In this case, fog collection (FC) is considered an efficient method to collect water, where bionic HS can be the bridge to efficiently facilitate the process of the FC. In this review, firstly, we discuss the basic principles of FC. Secondly, the role of HS in FC is analyzed in terms of the microstructure of typical examples of plants and animals. Simultaneously, the water-harvesting function of HS in a relatively new organism, fungal filament, is also presented. Thirdly, the HS design in each representative work is analyzed from a biomimetic perspective (single to multiple biomimetic approaches). The role of HS in FC, and then the FC performance of each work are analyzed in order of spatial dimension from a bionic perspective. Finally, the challenges at this stage and the outlook for the future are presented.

Synergetic Role of Nano-/Microscale Structures of the Trifolium Leaf Surface for Self-Cleaning Properties

Wetting has an essential pertinence to surface applications. The exemplary water-repelling and self-cleaning surfaces in nature have stimulated considerable scientific exploration, given their practical leverage in cleaning window glasses, painted surfaces, fabrics, and solar cells. Here, we explored the three-tier hierarchical surface structure of the Trifolium leaf with distinguished self-cleaning characteristics. The leaf remains fresh, withstands adverse weather, thrives throughout the year, and self-cleans itself against mud or dust. Self-cleaning features are attributed to a three-tier hierarchical synergetic design. The leaf surface is explicated by an optical microscope, a scanning electron microscope, a three-dimensional profilometer, and a water contact angle measuring device. Hierarchical base roughness (i.e., nano-/microscale) comprises a fascinating arrangement, which imparts a superhydrophobic feature to the surface. As a result, the contaminants present on the leaf surface are washed with rolling water droplets. We noticed that self-cleaning is a function of impacting or rolling droplets, and the rolling mechanism is identified as efficient. The self-cleaning phenomenon is studied for contaminations of variable sizes, shapes, and compositions. The contaminations are supplied in both dry and aqueous mixtures. Furthermore, we examined the self-cleaning effect of the Trifolium leaf surface by atmospheric water harvesting. The captured water drops fuse, roll, descend, and wash away the contaminating particles. The diversity of contaminants investigated makes this study applicable to different environmental conditions. And, along with other parallel technologies, this investigation could be useful for crafting sustainable self-cleaning surfaces for regions with acute water scarcity.

Multiple-Droplet Selective Manipulation Enabled by Laser-Textured Hydrophobic Magnetism-Responsive Slanted Micropillar Arrays with an Ultrafast Reconfiguration Rate

Biomimetic structures based on the magnetic response have attracted ever-increasing attention in droplet manipulation. Till now, most methods for droplet manipulation by a magnetic response are only applicable to a single droplet. It is still a challenge to achieve on-demand and precise control of multiple droplets (≥2). In this paper, a strategy for on-demand manipulation of multiple droplets based on magnetism-responsive slanted micropillar arrays (MSMAs) is proposed. The Glaco-modified superhydrophobic surface is the basis of multiple-droplet manipulation. The droplet's motion mode (pinned, unidirectional, and bidirectional) can be readily fine-tuned by changing the volume of droplets and the speed of the magnetic field. The rapid movement of droplets (10-80 mm/s) in the horizontal direction is realized by the unidirectional waves of the micropillar array driven by a specific magnetic field. The bending angle of micropillars can be rapidly and reversibly adjusted from 0 to 90° under the action of a magnetic field. Meanwhile, the liquid-involved light, electric switch, and biomedical detection can be designed by manipulating the droplets on demand. The superiority of MSMAs in multiple-droplet programmable manipulation opens up an avenue for applications in microfluidic and biomedical engineering.

A critical review on robust self-cleaning properties of lotus leaf

The robust self-cleaning of a lotus leaf is the most classic and powerful phenomenon in nature, whose hybrid papillae and biological wax guarantee its functions. The stability of the lotus leaf surface function is determined by its overall structural design, and is also the fundamental reason for its long-term survival in the natural environment. In fact, the durability of lotus leaf surface function is facilitated by the coordination of many factors which is why it is challenging to be investigated using bionic technology. In this review, we comprehensively examined the synergistic effects of flexible characteristics, surface topography, hollow interlayers, leaf shape, and bent petioles on the structural stability of the lotus leaf surface. The key significance of these factors is in transferring the stress and strain on the surface downwards, reducing the load on the surface, improving the durability of the self-cleaning function, and ultimately ensuring respiration and photosynthesis of leaves in the natural environment. This comprehensive scrutiny offers a novel classical bionic scheme for enhancing the structural stability of a surface, which has potential for applications in deepwater self-cleaning, anti-drag, anti-icing, thermal insulation, and mechanical enhancement of membranes and buildings.

Effect of Wettability and Adhesion Property of Solid Margins on Water Drainage

Liquid flows at the solid surface and drains at the margin under gravity are ubiquitous in our daily lives. Previous research mainly focuses on the effect of substantial margin's wettability on liquid pinning and has proved that hydrophobicity inhibits liquids from overflowing margins while hydrophilicity plays the opposite role. However, the effect of solid margins' adhesion properties and their synergy with wettability on the overflowing behavior of water and resultant drainage behaviors are rarely studied, especially for large-volume water accumulation on the solid surface. Here, we report the solid surfaces with high-adhesion hydrophilic margin and hydrophobic margin stably pin the air-water-solid triple contact lines at the solid bottom and solid margin, respectively, and then drain water faster through stable water channels termed water channel-based drainage over a wide range of water flow rates. The hydrophilic margin promotes the overflowing of water from top to bottom. It constructs a stable "top + margin + bottom" water channel, and a high-adhesion hydrophobic margin inhibits the overflowing from margin to bottom and constructs a stable "top + margin" water channel. The constructed water channels essentially decrease marginal capillary resistances, guide top water onto the bottom or margin, and assist in draining water faster, under which gravity readily overcomes the surface tension resistance. Consequently, the water channel-based drainage mode achieves 5-8 times faster drainage behavior than the no-water channel drainage mode. The theoretical force analysis also predicts the experimental drainage volumes for different drainage modes. Overall, this article reveals marginal adhesion and wettability-dependent drainage modes and provides motivations for drainage plane design and relevant dynamic liquid-solid interaction for various applications.

Self-healing system of superhydrophobic surfaces inspired from and beyond nature

Superhydrophobic surfaces show wide prospects in a variety of applications requiring self-cleaning, anti-fog, anti-ice, anti-corrosion and anti-fouling properties, which have attracted the attention of many researchers. However, superhydrophobic surfaces are inevitably affected by chemical corrosion, scratches and wear in practical applications, resulting in the loss of superhydrophobicity. To solve this problem, researchers have developed superhydrophobic surfaces with self-healing properties. In this paper, the research achievements of self-healing superhydrophobic materials in recent years are summarized, and the preparation and repair principle of self-healing superhydrophobic surfaces are introduced from three aspects: surface chemical composition repair, surface roughness repair and double repair. In addition, some multifunctional self-healing superhydrophobic surfaces are introduced, such as conductive, stretchable, antibacterial, etc. Finally, in order to provide a reference for the preparation of widely used long-acting superhydrophobic materials, some existing problems and future development prospects are described in order to attract more researchers' attention and promote the development of this field.

Wetting state transitions of individual condensed droplets on pillared textured surfaces

The ability to realize the self-removal of condensed droplets from a surface is of critical importance for science and applications such as water harvesting and thermal engineering. Despite the enormous interest in micro/nanotextured superhydrophobic materials for high-efficiency condensation, a clear picture of the wetting state transition of condensed droplets is missing, particularly, on a single-droplet level of the order of micrometers. Herein, by varying a substantial parameter space of the contact angle and the geometry of the pillared textures, we have quantified the wetting transition of individual droplets during condensation. We found that a droplet is finally either spontaneously removed from the textures due to a Laplace pressure difference or wets the textures; four different wetting state transition modes have been identified numerically and they are classified in a phase diagram. Simple theories have been constructed to correlate the critical conditions of the wetting state transition to the wettability and geometry of the textures, and they were verified experimentally. We found that the self-removal of condensed droplets benefits from the contact angle and the height of the pillars. These findings not only enhance our fundamental understanding of the wetting state transition of condensed droplets but also allow the rational design of micro/nanotextured water-repellent materials for anti-fogging and anti-wetting.

Rotating Surfaces Promote the Shedding of Droplets

Achieving rapid shedding of droplets from solid surfaces has received substantial attention because of its diverse applications. Previous studies have focused on minimizing contact times of liquid droplets interacting with stationary surfaces, yet little consideration has been given to that of moving surfaces. Here, we report a different scenario: A water droplet rapidly detaches from micro/nanotextured rotating surfaces in an intriguing doughnut shape, contributing to about 40% contact time reduction compared with that on stationary surfaces. The doughnut-shaped bouncing droplet fragments into satellites and spontaneously scatters, thus avoiding further collision with the substrate. In particular, the contact time is highly dependent on impact velocities of droplets, beyond previous descriptions of classical inertial-capillary scaling law. Our results not only deepen the fundamental understanding of droplet dynamics on moving surfaces but also suggest a synergistic mechanism to actively regulate the contact time by coupling the kinematics of droplet impingement and surface rotation.

High-Performance Directional Water Transport Using a Two-Dimensional Periodic Janus Gradient Structure

Numerous materials in micro- or nanoscale hierarchical structures with surface gradients serve as the enablers in directional liquid transportation. However, concurrent high-speed and long-range liquid transport is yet to be fully realized so far. Here, an overall-improved approach is achieved in both water transport distance and velocity aspects using a 2D periodic Janus gradient structure, which is inspired by the Janus-wettable desert beetle back, tapered asymmetric cacti spine, and periodic Nepenthes alata microcavity. This 2D channel can efficiently regulate the kinetics of liquid transport within its confined structure, in which the terminal potential well and periodic Janus topological structure enable sustaining water propelling through a long distance. In addition, the rapidly formed aqueous film facilitates a high initial momentum and fast transport of liquid droplets along the channel, achieving an averaged velocity of over 400 mm s^-1 and a maximum normalized transport distance of 23.4 for a 3 µL droplet, as well as an ultralow liquid volume loss of 6.02% upon high-flux water transport. This scalable, controllable, and easy-fabricable 2D water transport system provides an insightful pathway in realizing high-performance water manipulation and possibly facilitates substantial innovative applications in multidisciplinary fields.

Ultrastable Super-Hydrophobic Surface with an Ordered Scaly Structure for Decompression and Guiding Liquid Manipulation

Directional droplet manipulation is very crucial in microfluidics, intelligent liquid management, etc. However, excessive liquid pressure tends to destroy the solid-gas-liquid (SAL) composite interface, creating a highly adhesive surface, which is not conducive to liquid transport. Herein, we propose a strategy to enhance the surface durability, in which the surface cannot withstand liquid pressure only by "blocking" but must instead guide liquid transport for "decompression". Learning from the water resistance of water strider legs and the drag reduction of shark skin, we present a continuous integrated system to obtain an ultrastable super-hydrophobic surface with a highly ordered scaly structure via a liquid flow-induced alignment method for lossless unidirectional liquid transport. The nonwetting scaly structure can both buffer liquid pressure and drive droplet motion to further reduce the vertical pressure of the liquid. Moreover, droplets can be manipulated unidirectionally using a voice. This work could aid in manufacturing scalable anisotropic micro-nanostructure surfaces, which inspires efforts in realizing lossless continuous liquid control on demand and related microfluidic applications.

Enhanced Insecticidal Effect and Interface Behavior of Nicotine Hydrochloride Solution by a Vesicle Surfactant

Nicotine hydrochloride (NCT) has a good control effect on hemiptera pests, but its poor interfacial behavior on the hydrophobic leaf leads to few practical applications. In this study, a vesicle solution by the eco-friendly surfactant, sodium diisooctyl succinate sulfonate (AOT), was prepared as the pesticide carrier for NCT. The physical chemical properties of NCT-loaded AOT vesicles (NCT/AOT) were investigated by techniques such as dynamic light scattering (DLS), small-angle X-ray scattering (SAXS), and cryogenic transmission electron microscopy (cryo-TEM). The results showed that the pesticide loading and encapsulation efficiency of NCT/AOT were 10.6% and 94.8%, respectively. The size of NCT/AOT vesicle was about 177 nm. SAXS and surface tension results indicated that the structure of the NCT/AOT vesicle still existed with low surface tension even after being diluted 200 times. The contact angle of NCT/AOT was always below 30°, which means it could wet the surface of the cabbage leaf well. Consequently, NCT/AOT vesicles could effectively reduce the bounce of pesticide droplets. In vitro release experiments showed that NCT/AOT vesicles had sustained release properties; 60% of NCT in NCT/AOT released after 24 h, and 80% after 48 h. Insecticidal activity assays against aphids revealed that AOT vesicles exhibited insecticidal activity and could have a synergistic insecticidal effect with NCT after the loading of NCT. Thus, the NCT/AOT vesicles significantly improved the insecticidal efficiency of NCT, which has potential application in agricultural production activities.

Utilizing Cell Culture Assisted Anodization to Fabricate Aluminium Oxide with a Gradient Microstep and Nanopore Structure

Anodic aluminum oxide (AAO) with a gradient microstep and nanopore structure (GMNP) is fabricated by inversely using cell culture to control the reaction areas in the electrochemical anodization, which shows a larger porosity than that of typical planar AAO. The figure of the microstep is influenced by the cell dehydration temperature which controls the cell shrinkage degree. A GMNP AAO with a diameter of 2.5 cm is achieved. Polymer with a gradient microstep and nanonipple structure is fabricated using the GMNP AAO as the template, which denotes that GMNP AAO could become a broad platform for the structural preparation of various materials with advanced functions.

Multistimuli-Responsive Hydroplaning Superhydrophobic Microrobots with Programmable Motion and Multifunctional Applications

Superhydrophobic microrobots that can swim efficiently and rapidly on water under the action of external stimuli have attracted significant research attention for various applications. However, most studies on superhydrophobic microrobots have focused on single-stimulus driving modes, which limit the motion and functional applications of microrobots in complex aquatic environments. Therefore, multistimuli-responsive superhydrophobic microrobots that are capable of drifting rapidly on water through light, magnetic, and chemical control were developed in this study. The stability and environmental adaptability of the microrobots were systematically investigated. The microrobots achieved programmable trajectory motion on water, particularly complex motions such as circular, spiral, and helical movements under the coupled influence of chemical and magnetic fields. Importantly, the motion and control of multimicrorobots can be realized by combining control methods. Under the action of light and magnetic field, multimicrorobots could realize cooperative movement and completed the transportation of cargo. Additionally, broad multifunctional applications of the microrobots were explored in terms of oil spill recovery and solution mix. This study provides a method for the preparation and development of superhydrophobic microrobots with multistimuli-responsive characteristics.

Condensation droplet sieve

Large droplets emerging during dropwise condensation impair surface properties such as anti-fogging/frosting ability and heat transfer efficiency. How to spontaneously detach massive randomly distributed droplets with controlled sizes has remained a challenge. Herein, we present a solution called condensation droplet sieve, through fabricating microscale thin-walled lattice structures coated with a superhydrophobic layer. Growing droplets were observed to jump off this surface once becoming slightly larger than the lattices. The maximum radius and residual volume of droplets were strictly confined to 16 μm and 3.2 nl/mm² respectively. We reveal that this droplet radius cut off is attributed to the large tolerance of coalescence mismatch for jumping and effective isolation of droplets between neighboring lattices. Our work brings forth a strategy for the design and fabrication of high-performance anti-dew materials.

Spontaneous droplet jumping and control of dropwise condensation are relevant for water-harvesting, heat transfer and anti-frosting applications. The authors design a superhydrophobic surface with microscale thin-walled lattice structure to achieve effective jumping of droplets with specified radius range.

Complex Suspended Janus Droplets Constructed through Solvent Evaporation-Induced Phase Separation at the Air-Liquid Interface

Phase separation technology has attracted extensive scientific interest because of its intriguing structure changes during the phase separation process. Phase separation inside emulsion droplets in continuous surroundings has been well studied in recent years. Many investigations have also been conducted to study the droplet phase separation phenomena in noncontinuous surroundings. However, studies on the phase separation phenomena and the spreading behavior of suspended droplets at the air-liquid interface were rarely reported. In this study, PEGDA-glycerol suspended Janus droplets with a patchy structure were produced by utilizing solvent evaporation-induced droplet phase separation at the air-liquid interface. By altering the glycerol/PEGDA volume ratio, the initial proportion of ethanol, and the concentration of surfactants, suspended droplets with different morphologies can be achieved, which include filbert-shaped droplets (FSDs), half lotus seedpod single-phase Janus droplets (HLSDs), lotus seedpod single-phase Janus droplets (LSDs), lotus seedpod-shaped droplets (LSSDs), multiple-bulge droplets (MBDs), and half gourd-shaped droplets (HGSDs). A patchy structure was generated at the air-droplet interface, which was attributed to the Marangoni stresses induced by nonuniform evaporation. Furthermore, a modified spreading coefficient theory was constructed and verified to illustrate the phase separation at the air-droplet interface, which was the first research to predict the phase separation phenomena at the air-liquid interface via spreading coefficients theory. Moreover, we studied the factors that led to the droplets being able to float by designing the combined parameters, including three interfacial tensions and the equilibrium contact angles. Therefore, a simple and versatile strategy for creating suspended Janus droplets has been developed for the first time, which holds significant potential in a variety of applications for material synthesis, such as the electrospinning solution behavior when sprayed from the nozzle into the air.

A review on control of droplet motion based on wettability modulation: principles, design strategies, recent progress, and applications

The transport of liquid droplets plays an essential role in various applications. Modulating the wettability of the material surface is crucial in transporting droplets without external energy, adhesion loss, or intense controllability requirements. Although several studies have investigated droplet manipulation, its design principles have not been categorized considering the mechanical perspective. This review categorizes liquid droplet transport strategies based on wettability modulation into those involving (i) application of driving force to a droplet on non-sticking surfaces, (ii) formation of gradient surface chemistry/structure, and (iii) formation of anisotropic surface chemistry/structure. Accordingly, reported biological and artificial examples, cutting-edge applications, and future perspectives are summarized.

Production of an EP/PDMS/SA/AlZnO Coated Superhydrophobic Surface through an Aerosol-Assisted Chemical Vapor Deposition Process

In this study, a superhydrophobic coating on glass has been prepared through a single-step aerosol-assisted chemical vapor deposition (AACVD) process. During the process, an aerosolized precursor containing polydimethylsiloxane, epoxy resin, and stearic acid functionalized Al-doped ZnO nanoparticles was deposited onto the glass at 350 °C. X-ray photoelectron spectroscopy, scanning electron microscopy, and atomic force microscopy showed that the precursor was successfully coated and formed a nano/microstructure (surface roughness: 378.0 ± 46.1 nm) on the glass surface. The coated surface had a water contact angle of 159.1 ± 1.2°, contact angle hysteresis of 2.2 ± 1.7°, and rolling off-angle of 1°, indicating that it was superhydrophobic. In the self-cleaning test of the coated surface at a tilted angle of 20°, it was shown that water droplets rolled and washed out dirt on the surface. The stability tests showed that the surface remained superhydrophobic after 120 h of exposure to ultraviolet (UV) irradiation and even after heat exposure at 350 °C. In addition, the surface was highly repellent to water solutions of pH 1-13. The results showed that the addition of the functionalized nanoparticles into the precursor allowed for the control of surface roughness and provided a simplified single-step fabrication process of the superhydrophobic surface. This provides valuable information for developing the manufacturing process for superhydrophobic surfaces.

Bioinspired Robust Water Repellency in High Humidity by Micro-meter-Scaled Conical Fibers: Toward a Long-Time Underwater Aerobic Reaction

Superhydrophobic surfaces have suffered from being frequently penetrated by micro-/nano-droplets in high humidity, which severely deteriorates their water repellency. So far, various biological models for the high water repellency have been reported, which, however, focused mostly on the structural topology with less attention on the dimension character. Here, we revealed a common dimension character of the superhydrophobic fibrous structures of both Gerris legs and Argyroneta abdomens, featured as the conical topology and the micro-meter-scaled cylindrical diameter. In particular, it can be expressed by using a parameter of rp/l > 0.75 μm (r, l, and p are the radius, length, and apex spacing between fibers, respectively). Drawing inspiration, we developed a superhydrophobic micro-meter-scaled conical fiber array with a rather high rp/l value of 0.85 μm, which endows ultra-high water repellency even in high humidity. The micro-meter-scale asymmetric confined space between fibers enables generating a big difference in the Laplace pressure enough to propel the condensed dews away, while the tips help pin the air pocket underwater with a rather long life over 41 days. Taking advantage, we demonstrated a sustainable underwater aerobic reaction where oxygen was continuously supplied from the trapped air pocket by a gradually diffusing process. As a parameter describing both the dimension character and structural topology, the rp/l offers a new perspective for fabricating superhydrophobic fibrous materials with robust water repellency in high humidity, which inspires the innovative underwater devices with a robust anti-wetting performance.

Directional passive transport of nanodroplets on general axisymmetric surfaces

Rapid removal of small-sized droplets passively using fixed structures is a key challenge for various applications including anti-icing, rapid cooling, and water harvesting. In this work, we investigate the directional motion of nanodroplets on axisymmetric surfaces with curvature gradient through molecular dynamics (MD) simulations. It is found that as the shape of the axisymmetric surface is changed from a dome to a trumpet, the droplet velocity is greatly enhanced, by a factor of ∼14. Such an increase is mainly caused by the increment in the driving force. The droplet velocity changes nonlinearly as the surface wettability is varied and assumes the maximum at the contact angle of ∼75°. We derive a formula for the driving force of nanodroplets on general axisymmetric surfaces by evaluating the pressure gradient inside the droplet induced by the curvature gradient. Molecular dynamics simulations are performed to directly measure the driving force and confirm that the theoretical formula works well. By illustrating the reduced initial velocity of droplets as a function of a dimensionless number, which represents the ratio of the driving force to the retentive force due to contact angle hysteresis, we show that the onset of droplet motion on axisymmetric surfaces occurs when the dimensionless number is above a critical value. The dimensionless number reveals the effects of surface geometry, surface wettability, and droplet size on the droplet motion.

Locomotion and flow speed preferences in natural habitats by large water striders, Ptilomera tigrina, with micro-morphological adaptations for rowing

Water strider (Gerridae) morphology and behavior have become the focus of interdisciplinary research in biological diversification and bio-inspired technology. However, the diversity of behaviors and morphology of the large-sized Gerridae have not been intensely studied. Here, we provide locomotory behaviors and legs’ micro-morphology of the large South-East Asian water strider, Ptilomera tigrina. Using high-speed videography and experiments in natural habitats, as well as scanning electron microscopy of midlegs, we have determined that (1) P. tigrina individuals prefer relatively high flow speeds of 0.15–0.30 m/s, compared to other water striders previously studied, and they are also observed in very high flow speeds of up to 0.6 m/s; (2) they avoid stagnant water, but when on still and very slow flowing water they perform constant back-and-forth rowing using their midlegs; (3) their antipredatory reaction involves repetitive and very fast “protean” movements propelled by the midlegs; (4) their midleg tarsi and tibiae are equipped with brushes of ribbon-like hairs, which are used as paddles for rowing. As the locomotory behaviors and flow-speed preferences by P. tigrina require constant use of midlegs for rowing, the presence of special paddle structures on midlegs illustrates a hypothetical adaptive match between midlegs’ locomotory function and their micro-morphology.

Why did only one genus of insects, Halobates, take to the high seas?

Oceans cover more than 70% of the Earth’s surface and house a dizzying array of organisms. Mammals, birds, and all manner of fish can be commonly sighted at sea, but insects, the world’s most common animals, seem to be completely absent. Appearances can deceive, however, as 5 species of the ocean skater Halobates live exclusively at the ocean surface. Discovered 200 years ago, these peppercorn-sized insects remain rather mysterious. How do they cope with life at the ocean surface, and why are they the only genus of insects to have taken to the high seas?

Oceans cover over 70% of the earth’s surface and house a dizzying array of organisms, including five species of the peppercorn-sized ocean-skater Halobates, which live exclusively at the ocean surface. How do they cope with life at the ocean surface and why are they the only genus of insects able to conquer the high seas?

Assembly of Graphene Platelets for Bioinspired, Stimuli-Responsive, Low Ice Adhesion Surfaces

Design and fabrication of functional materials for anti-icing and deicing attract great attention from both the academic research and industry. Among them, the study of fish-scale-like materials has proved that enabling sequential rupture is an effective approach for weakening the intrinsic interface adhesion. Here, graphene platelets were utilized to construct fish-scale-like surfaces for easy ice detachment. Using a biomimicking arrangement of the graphene platelets, the surfaces were able to alter their structural morphology for the sequential rupture in response to external forces. With different packing densities of graphene platelets, all the surfaces showed universally at least 50% reduction in atomistic tensile ice adhesion strength. Because of the effect of sequential rupture, stronger ice-surface interactions did not lead to an obvious increase in ice adhesion. Interestingly, the high packing density of graphene platelets resulted in stable and reversible surface morphology in cyclic tensile and shearing tests, and subsequently high reproducibility of the sequential rupture mode. The fish-scale-like surfaces built and tested, together with the nanoscale deicing results, provided a close view of ice adhesion mechanics, which can promote future bioinspired, stress-responsive, anti-icing surface designs.

Controllable preparation of an ice cream-shaped hollow sphere array

Hollow microspheres with high specific surface area are widely used in thermal insulation, drug delivery and sustained release, catalysis and optical absorption. Eutectic gallium-indium (EGaIn) undergoes phase transformation and oxidation when heated in aqueous solution, which can provide a crystal seed and preferential growth environment for nanomaterials. Therefore, it is very promising to further study the application of liquid metal in functional and structural nanomaterials. In this study, a EGaIn-based ice cream-shaped hollow sphere array with nanostructures was firstly synthesized on the designed hole array model using a hydrothermal process, and then the surface was further modified by fluorination to form a superhydrophobic film. Different sizes of the hollow Eutectic gallium-indium zinc oxide (EGaIn-ZnO) microspheres could be easily achieved by varying the size of the model, hence leading to controllable wettability. Furthermore, hollow microspheres hold much air, making it feasible for application in the field of anti-ice and thermal insulation.

Enhanced Flexibility of the Segmented Honey Bee Tongue with Hydrophobic Tongue Hairs

Fibrous surfaces in nature have already exhibited excellent functions that are normally ascribed to the synergistic effects of special structures and material properties. The honey bee tongue, foraging liquid food in nature, has a unique segmented surface covered with dense hairs. Since honey bees are capable of using their tongue to adapt to possibly the broadest range of feeding environments to exploit every possible source of liquids, the surface properties of the tongue, especially the covering hairs, would likely represent an evolutionary optimization. In this paper, we show that their tongue hairs are stiff and hydrophobic, the latter of which is highly unexpected as the structure is designed for liquid capturing. We found that such hydrophobicity can prevent those stiff hairs from being adhered to the soft tongue surface, which could significantly enhance the deformability of the tongue when honey bees feed at various surfaces and promote their adaptability to different environments. These findings bridge the relationship between surface wettability and structural characteristics, which may shed new light on designing flexible microstructured fiber systems to transport viscous liquids.

Leg length and bristle density, both necessary for water surface locomotion, are genetically correlated in water striders

Access to hitherto unexploited ecological opportunities is associated with phenotypic evolution and often results in significant lineage diversification. Yet our understanding of the mechanisms underlying such adaptive traits remains limited. Water striders have been able to exploit the water-air interface, primarily facilitated by changes in the density of hydrophobic bristles and a significant increase in leg length. These two traits are functionally correlated and are both necessary for generating efficient locomotion on the water surface. Whether bristle density and leg length have any cellular or developmental genetic mechanisms in common is unknown. Here, we combine comparative genomics and transcriptomics with functional RNA interference assays to examine the developmental genetic and cellular mechanisms underlying the patterning of the bristles and the legs in Gerris buenoi and Mesovelia mulsanti, two species of water striders. We found that two duplication events in the genes beadex and taxi led to a functional expansion of the paralogs, which affected bristle density and leg length. We also identified genes for which no function in bristle development has been previously described in other insects. Interestingly, most of these genes play a dual role in regulating bristle development and leg length. In addition, these genes play a role in regulating cell division. This result suggests that cell division may be a common mechanism through which these genes can simultaneously regulate leg length and bristle density. We propose that pleiotropy, through which gene function affects the development of multiple traits, may play a prominent role in facilitating access to unexploited ecological opportunities and species diversification.

Multiple droplets on a conical fiber: formation, motion, and droplet mergers

Small droplets on slender conical fibers spontaneously move along the fiber due to capillary action. The droplet motion depends on the geometry of the cone, the surface wettability, the surface tension, the viscosity, and the droplet size. Here we study with experiments and numerical simulations, the formation, spontaneous motion, and the eventual merger, of multiple droplets on slender conical fibers as they interact with each other. The droplet size and their spacing on the fibre is controlled by the Plateau-Rayleigh instability after dip-coating the conical fiber. Once these droplets are formed on the fiber, they spontaneously start to move. Since droplets of different size move with different speeds, they effectively coarsen the droplet patterning by merging on the fiber. The droplet merging process affects locally the droplet speed and alters the spatiotemporal film deposition on the fiber.

Continuous, autonomous subsurface cargo shuttling by nature-inspired meniscus-climbing systems

Water-walking insects can harness capillary forces by changing their body posture to climb or descend the meniscus between the surface of water and a solid object. Controlling surface tension in this manner is necessary for predation, escape and survival. Inspired by this behaviour, we demonstrate autonomous, aqueous-based synthetic systems that overcome the meniscus barrier and shuttle cargo subsurface to and from a landing site and a targeted drop-off site. We change the sign of the contact angle of a coacervate sac containing an aqueous phase or of a hydrogel droplet hanging from the surface by controlling the normal force acting on the sac or droplet. The cyclic buoyancy-induced cargo shuttling occurs continuously, as long as the supply of reactants diffusing to the sac or droplet from the surrounding aqueous phase is not exhausted. These findings may lead to potential applications in autonomously driven reaction or delivery systems and micro-/milli-robotics.

Scientific reports controlling droplet splashing and bouncing by dielectrowetting

Stopping droplets from bouncing or splashing after impacting a surface is fundamental in preventing cross-contamination, and the spreading of germs and harmful substances. Here we demonstrate that dielectrowetting can be applied to actively control the dynamics of droplet impact. Moreover, we demonstrate that dielectrowetting can be used to prevent droplet bouncing and suppress splashing. In our experiments, the dielectrowetting effect is produced on a flat substrate by two thin interdigitated electrodes connected to an alternating current potential. Our findings show that the strength of the electric potential can affect the dynamic contact angle and regulate the spreading, splashing and receding dynamics at the right time-scales.

Three-dimensional capillary ratchet-induced liquid directional steering

[Figure: see text].

Dropwise condensation: From fundamentals of wetting, nucleation, and droplet mobility to performance improvement by advanced functional surfaces

As a ubiquitous vapor-liquid phase-change process, dropwise condensation has attracted tremendous research attention owing to its remarkable efficiency of energy transfer and transformative industrial potential. In recent years, advanced functional surfaces, profiting from great progress in modifying micro/nanoscale features and surface chemistry on surfaces, have led to exciting advances in both heat transfer enhancement and fundamental understanding of dropwise condensation. In this review, we discuss the development of some key components for achieving performance improvement of dropwise condensation, including surface wettability, nucleation, droplet mobility, and growth, and discuss how they can be elaborately controlled as desired using surface design. We also present an overview of dropwise condensation heat transfer enhancement on advanced functional surfaces along with the underlying mechanisms, such as jumping condensation on nanostructured superhydrophobic surfaces, and new condensation characteristics (e.g., Laplace pressure-driven droplet motion, hierarchical condensation, and sucking flow condensation) on hierarchically structured surfaces. Finally, the durability, cost, and scalability of specific functional surfaces are focused on for future industrial applications. The existing challenges, alternative strategies, as well as future perspectives, are essential in the fundamental and applied aspects for the practical implementation of dropwise condensation.

Progress in Non-Traditional Processing for Fabricating Superhydrophobic Surfaces

When the water droplets are on some superhydrophobic surfaces, the surface only needs to be inclined at a very small angle to make the water droplets roll off. Hence, building a superhydrophobic surface on the material substrate, especially the metal substrate, can effectively alleviate the problems of its inability to resist corrosion and easy icing during use, and it can also give it special functions such as self-cleaning, lubrication, and drag reduction. Therefore, this study reviews and summarizes the development trends in the fabrication of superhydrophobic surface materials by non-traditional processing techniques. First, the principle of the superhydrophobic surfaces fabricated by laser beam machining (LBM) is introduced, and the machining performances of the LBM process, such as femtosecond laser, picosecond laser, and nanosecond laser, for fabricating the surfaces are compared and summarized. Second, the principle and the machining performances of the electrical discharge machining (EDM), for fabricating the superhydrophobic surfaces, are reviewed and compared, respectively. Third, the machining performances to fabricate the superhydrophobic surfaces by the electrochemical machining (ECM), including electrochemical oxidation process and electrochemical reduction process, are reviewed and grouped by materials fabricated. Lastly, other non-traditional machining processes for fabricating superhydrophobic surfaces, such as ultrasonic machining (USM), water jet machining (WJM), and plasma spraying machining (PSM), are compared and summarized. Moreover, the advantage and disadvantage of the above mentioned non-traditional machining processes are discussed. Thereafter, the prospect of non-traditional machining for fabricating the desired superhydrophobic surfaces is proposed.