Vibrational coupling in plasmonic molecules

Focusing Surface Acoustic Waves with a Plasmonic Hypersonic Lens

Plasmonic nanoantennas have proven to be efficient transducers of electromagnetic to mechanical energy and vice versa. The sudden thermal expansion of these structures after an ultrafast optical pulsed excitation leads to the emission of hypersonic acoustic waves to the supporting substrate, which can be detected by another antenna that acts as a high-sensitivity mechanical probe due to the strong modulation of its optical response. Here, we propose and experimentally demonstrate a nanoscale acoustic lens comprised of 11 gold nanodisks whose collective oscillation at gigahertz frequencies gives rise to an interference pattern that results in a diffraction-limited surface acoustic beam of about 340 nm width, with an amplitude contrast of 60%. Via spatially decoupled pump-probe experiments, we were able to map the radiated acoustic energy in the proximity of the focal area, obtaining a very good agreement with the continuum elastic theory.

Coherent acoustic vibrations of Au nanoblocks and their modulation by Al2O3 layer deposition

Coherent acoustic phonons induced in metallic nanostructures have attracted tremendous attention owing to their unique optomechanical characteristics. The frequency of the acoustic phonon vibration is highly sensitive to the material adsorption on metallic nanostructures and, therefore, the acoustic phonon offers a promising platform for ultrasensitive mass sensors. However, the physical origin of acoustic frequency modulation by material adsorption has been partially unexplored so far. In this study, we prepared Al2O3-deposited Au nanoblocks and measured their acoustic phonon frequencies using time-resolved pump-probe measurements. By precisely controlling the thickness of the Al2O3 layer, we systematically investigated the relation between the acoustic phonon frequency and the deposited Al2O3 amounts. The time-resolved measurements revealed that the acoustic breathing modes were predominantly excited in the Au nanoblocks, and their frequencies increased with the increment of the Al2O3 thickness. From the relationship between the acoustic phonon frequency and the Al2O3 thickness, we revealed that the acoustic phonon frequency modulation is attributed to the density change of the whole sample. Our results would provide fruitful information for developing quantitative mass sensing devices based on metallic nanostructures.

Broadband Transient Response and Wavelength-Tunable Photoacoustics in Plasmonic Hetero-nanoparticles

The optically driven acoustic modes and nonlinear response of plasmonic nanoparticles are important in many applications, but are strongly resonant, which restricts their excitation to predefined wavelengths. Here, we demonstrate that multilayered spherical plasmonic hetero-nanoparticles, formed by alternating layers of gold and silica, provide a platform for a broadband nonlinear optical response from visible to near-infrared wavelengths. They also act as a tunable optomechanical system with mechanically decoupled layers in which different acoustic modes can be selectively switched on/off by tuning the excitation wavelength. These observations not only expand the knowledge about the internal structure of composite plasmonic nanoparticles but also allow for an additional degree of freedom for controlling their nonlinear optical and mechanical properties.

Launching directional hypersonic surface waves in monolithic gallium phosphide nanodisks: two holes are better than one

The emergence and rapid progress of all-dielectric nanoantennas have provided unprecedented platforms for applications in sensing, optical control of light, opto-mechanics and metrology at the nanoscale. We present a general figure-of-merit (FOM) considering both optical and vibrational responses. Detectable mechanical vibrations ranging from gigahertz to terahertz in gallium phosphide (GaP) structures on sub-wavelength scales are found to surpass their metallic counterparts in a 400-800 nm pump-probe configuration. Then, we tailored low-aspect ratio GaP disks being probed near their optical anapole resonance. We further broke the isotropy of the nanodisks and achieved pronounced directional propagation for launching surface acoustic waves (SAWs) with a double-hole structure rather than with a one-hole configuration, which could be attributed to the constructive superposition of vibration induced by the two holes in the appropriate direction. Finally, we demonstrated that the orbital angular momentum of SAWs could be generated with a spiral distribution of the two-hole nanodisks. Our work paves a new way to monolithic GaP nanoantennas towards photoacoustic applications such as hypersound routers, stirring up inverse designs of individual antennas for phononic metasurfaces, topological phononics as well as quantum phononics.

Nanoscale subparticle imaging of vibrational dynamics using dark-field ultrafast transmission electron microscopy

An understanding of nanoscale energy transport and acoustic response is important for applications of nanomaterials but hinges on a complete characterization of their structural dynamics. The precise determination of the structural dynamics within nanoparticles, however, is still challenging and requires high spatiotemporal resolution and detection sensitivity. Here we present a centred dark-field imaging approach based on ultrafast transmission electron microscopy that is capable of directly mapping the picosecond-scale evolution of intrananoparticle vibration with a spatial resolution down to 3 nm. Using this approach, we investigated the photo-induced vibrational dynamics in individual gold heterodimers composed of a nanoprism and a nanosphere. We observed not only the retardation of in-plane vibrations in the nanoprisms, which we attribute to thermal and vibrational energy transferred from adjacent nanospheres mediated by surfactants, but also the existence of a complex multimodal oscillation and its spatial variation within individual nanoprisms. This work represents an advance in real-space mapping of vibrational dynamics on the subnanoparticle level with a high detection sensitivity.

Gigahertz optoacoustic vibration in Sub-5 nm tip-supported nano-optomechanical metasurface

The gigahertz acoustic vibration of nano-optomechanical systems plays an indispensable role in all-optical manipulation of light, quantum control of mechanical modes, on-chip data processing, and optomechanical sensing. However, the high optical, thermal, and mechanical energy losses severely limit the development of nano-optomechanical metasurfaces. Here, we demonstrated a high-quality 5 GHz optoacoustic vibration and ultrafast optomechanical all-optical manipulation in a sub-5 nm tip-supported nano-optomechanical metasurface (TSNOMS). The physical rationale is that the design of the semi-suspended metasurface supported by nanotips of <5 nm enhances the optical energy input into the metasurface and closes the mechanical and thermal output loss channels, result in dramatically improvement of the optomechanical conversion efficiency and oscillation quality of the metasurface. The design strategy of a multichannel-loss-mitigating semi-suspended metasurface can be generalized to performance improvements of on-chip processed nano-optomechanical systems. Applications include all-optical operation of nanomechanical systems, reconfigurable nanophotonic devices, optomechanical sensing, and nonlinear and self-adaptive photonic functionalities.

Optomechanical Hot-Spots in Metallic Nanorod-Polymer Nanocomposites

Plasmonic coupling between adjacent metallic nanoparticles can be exploited for acousto-plasmonics, single-molecule sensing, and photochemistry. Light absorption or electron probes can be used to study plasmons and their interactions, but their use is challenging for disordered systems and colloids dispersed in insulating matrices. Here, we investigate the effect of plasmonic coupling on optomechanics with Brillouin light spectroscopy (BLS) in a prototypical metal-polymer nanocomposite, gold nanorods (Au NRs) in polyvinyl alcohol. The intensity of the light inelastically scattered on thermal phonons captured by BLS is strongly affected by the wavelength of the probing light. When light is resonant with the transverse plasmons, BLS reveals mostly the normal vibrational modes of single NRs. For lower energy off-resonant light, BLS is dominated by coupled bending modes of NR dimers. The experimental results, supported by optomechanical calculations, document plasmonically enhanced BLS and reveal energy-dependent confinement of coupled plasmons close to the tips of NR dimers, generating BLS hot-spots. Our work establishes BLS as an optomechanical probe of plasmons and promotes nanorod-soft matter nanocomposites for acousto-plasmonic applications.

Improved Light Harvesting of Fiber-Shaped Dye-Sensitized Solar Cells by Using a Bacteriophage Doping Method

Fiber-shaped solar cells (FSCs) with flexibility, wearability, and wearability have emerged as a topic of intensive interest and development in recent years. Although the development of this material is still in its early stages, bacteriophage-metallic nanostructures, which exhibit prominent localized surface plasmon resonance (LSPR) properties, are one such material that has been utilized to further improve the power conversion efficiency (PCE) of solar cells. This study confirmed that fiber-shaped dye-sensitized solar cells (FDSSCs) enhanced by silver nanoparticles-embedded M13 bacteriophage (Ag@M13) can be developed as solar cell devices with better PCE than the solar cells without them. The PCE of FDSSCs was improved by adding the Ag@M13 into an iodine species (I⁻/I₃⁻) based electrolyte, which is used for redox couple reactions. The optimized Ag@M13 enhanced FDSSC showed a PCE of up to 5.80%, which was improved by 16.7% compared to that of the reference device with 4.97%.

Chiral Magneto-Optical Properties of Supra-Assembled Fe3O4 Nanoparticles

Research on the chiral magneto-optical properties of inorganic nanomaterials has enabled novel applications in advanced optical and electronic devices. However, the corresponding chiral magneto-optical responses have only been studied under strong magnetic fields of ≥1 T, which limits the wider application of these novel materials. In this paper, we report on the enhanced chiral magneto-optical activity of supra-assembled Fe₃O₄ magnetite nanoparticles in the visible range at weak magnetic fields of 1.5 mT. The spherical supra-assembled particles with a diameter of ∼90 nm prepared by solvothermal synthesis had single-crystal-like structures, which resulted from the oriented attachment of nanograins. They exhibited superparamagnetic behavior even with a relatively large supraparticle diameter that exceeded the size limit for superparamagnetism. This can be attributed to the small size of nanograins with a diameter of ∼12 nm that constitute the suprastructured particles. Magnetic circular dichroism (MCD) measurements at magnetic fields of 1.5 mT showed distinct chiral magneto-optical activity from charge transfer transitions of magnetite in the visible range. For the supraparticles with lower crystallinity, the MCD peaks in the 250-550 nm range assigned as the ligand-to-metal charge transfer (LMCT) and the inter-sublattice charge transfer (ISCT) show increased intensities in comparison to those with higher crystallinity samples. On the contrary, the higher crystallinity sample shows higher MCD intensities near 600-700 nm for the intervalence charge transfer (IVCT) transition. The differences in MCD responses can be attributed to the crystallinity determined by the reaction time, lattice distortion near grain boundaries of the constituent nanocrystals, and dipolar interactions in the supra-assembled structures.

Polymer dependent acoustic mode coupling and Hooke's law spring constants in stacked gold nanoplates

Metal nanoparticles are excellent acoustic resonators and their vibrational spectroscopy has been widely investigated. However, the coupling between vibrational modes of different nanoparticles is less explored. For example, how the intervening medium affects the coupling strength is not known. Here, we investigate how different polymers affect coupling in Au nanoplate-polymer-Au nanoplate sandwich structures. The coupling between the breathing modes of the Au nanoplates was measured using single-particle pump-probe spectroscopy, and the polymer dependent coupling strength was determined experimentally. Analysis of the acoustic mode coupling gives the effective spring constant for the polymers. A relative motion mode was also observed for the stacked Au nanoplates. The frequency of this mode is strongly correlated with the coupling constant for the breathing modes. The breathing mode coupling and relative motion mode were analyzed using a coupled oscillator model. This model shows that both these effects can be described using the same spring constant for the polymer. Finally, we present a new type of mass balance using the strongly coupled resonators. We show that the resonators have a mass detection limit of a few femtograms. We envision that further understanding of the vibrational coupling in acoustic resonators will improve the coupling strength and expand their potential applications.

Plasmon Character Index: An Accurate and Efficient Metric for Identifying and Quantifying Plasmons in Molecules

Plasmons, which are collective and coherent oscillations of charge carriers driven by an external field, play an important role in applications such as solar energy harvesting, sensing, and catalysis. Conventionally, plasmons are found in bulk and nanomaterials and can be described with classical electrodynamics. In recent years, plasmons have also been identified in molecules, and these molecules have been utilized to build plasmonic devices. As molecular plasmons can no longer be described by classical electrodynamics, a description using quantum mechanics is necessary. In this Letter, we develop a quantum metric to accurately and efficiently identify and quantify plasmons in molecules. A number, which we call the plasmon character index (PCI), can be calculated for each electronic excited state and describes the plasmonicity of the excitation. PCI is developed from the collective and coherent excitation picture in orbitals and shows excellent agreement with the predictions from scaled time-dependent density functional theory but is vastly more computationally efficient. Therefore, PCI can be a useful tool in identifying and quantifying plasmons and will inform the rational design of plasmonic molecules and nanoclusters.

Physics of surface vibrational resonances: pillared phononic crystals, metamaterials, and metasurfaces

The introduction of engineered resonance phenomena on surfaces has opened a new frontier in surface science and technology. Pillared phononic crystals, metamaterials, and metasurfaces are an emerging class of artificial structured media, featuring surfaces that consist of pillars-or branching substructures-standing on a plate or a substrate. A pillared phononic crystal exhibits Bragg band gaps, while a pillared metamaterial may feature both Bragg band gaps and local resonance hybridization band gaps. These two band-gap phenomena, along with other unique wave dispersion characteristics, have been exploited for a variety of applications spanning a range of length scales and covering multiple disciplines in applied physics and engineering, particularly in elastodynamics and acoustics. The intrinsic placement of pillars on a semi-infinite surface-yielding a metasurface-has similarly provided new avenues for the control and manipulation of wave propagation. Classical waves are admitted in pillared media, including Lamb waves in plates and Rayleigh and Love waves along the surfaces of substrates, ranging in frequency from hertz to several gigahertz. With the presence of the pillars, these waves couple with surface resonances richly creating new phenomena and properties in the subwavelength regime and in some applications at higher frequencies as well. At the nanoscale, it was shown that atomic-scale resonances-stemming from nanopillars-alter the fundamental nature of conductive thermal transport by reducing the group velocities and generating mode localizations across the entire spectrum of the constituent material well into the terahertz regime. In this article, we first overview the history and development of pillared materials, then provide a detailed synopsis of a selection of key research topics that involve the utilization of pillars or similar branching substructures in different contexts. Finally, we conclude by providing a short summary and some perspectives on the state of the field and its promise for further future development.

Optomechanic Coupling in Ag Polymer Nanocomposite Films

Particle vibrational spectroscopy has emerged as a new tool for the measurement of elasticity, glass transition, and interactions at a nanoscale. For colloid-based materials, however, the weakly localized particle resonances in a fluid or solid medium renders their detection difficult. The strong amplification of the inelastic light scattering near surface plasmon resonance of metallic nanoparticles (NPs) allowed not only the detection of single NP eigenvibrations but also the interparticle interaction effects on the acoustic vibrations of NPs mediated by strong optomechanical coupling. The "rattling" and quadrupolar modes of Ag/polymer and polymer-grafted Ag NPs with different diameters in their assemblies are probed by Brillouin light spectroscopy (BLS). We present thorough theoretical 3D calculations for anisotropic Ag elasticity to quantify the frequency and intensity of the "rattling" mode and hence its BLS activity for different interparticle separations and matrix rigidity. Theoretically, a liquidlike environment, e.g., poly(isobutylene) (PIB) does not support rattling vibration of Ag dimers but unexpectedly hardening of the extremely confined graft melt renders both activation of the former and a frequency blue shift of the fundamental quadrupolar mode in the grafted nanoparticle Ag@PIB film.

Gigahertz Nano-Optomechanical Resonances in a Dielectric SiC-Membrane Metasurface Array

Optically and vibrationally resonant nanophotonic devices are of particular importance for their ability to enhance optomechanical interactions, with applications in nanometrology, sensing, nano-optical control of light, and optomechanics. Here, the optically resonant excitation and detection of gigahertz vibrational modes are demonstrated in a nanoscale metasurface array fabricated on a suspended SiC membrane. With the design of the main optical and vibrational modes to be those of the individual metamolecules, resonant excitation and detection are achieved by making use of direct mechanisms for optomechanical coupling. Ultrafast optical pump-probe studies reveal a multimodal gigahertz vibrational response corresponding to the mechanical modes of the suspended nanoresonators. Wavelength and polarization dependent studies reveal that the excitation and detection of vibrations takes place through the metasurface optical modes. The dielectric metasurface pushes the modulation speed of optomechanical structures closer to their theoretical limits and presents a potential for compact and easily fabricable optical components for photonic applications.

First-Principles Insights into Plasmon-Induced Catalysis

The size- and shape-controlled enhanced optical response of metal nanoparticles (NPs) is referred to as a localized surface plasmon resonance (LSPR). LSPRs result in amplified surface and interparticle electric fields, which then enhance light absorption of the molecules or other materials coupled to the metallic NPs and/or generate hot carriers within the NPs themselves. When mediated by metallic NPs, photocatalysis can take advantage of this unique optical phenomenon. This review highlights the contributions of quantum mechanical modeling in understanding and guiding current attempts to incorporate plasmonic excitations to improve the kinetics of heterogeneously catalyzed reactions. A range of first-principles quantum mechanics techniques has offered insights, from ground-state density functional theory (DFT) to excited-state theories such as multireference correlated wavefunction methods. Here we discuss the advantages and limitations of these methods in the context of accurately capturing plasmonic effects, with accompanying examples.

Plasmonic nanoarcs: a versatile platform with tunable localized surface plasmon resonances in octave intervals

The tunability of the longitudinal localized surface plasmon resonances (LSPRs) of metallic nanoarcs is demonstrated with key relationships identified between geometric parameters of the arcs and their resonances in the infrared. The wavelength of the LSPRs is tuned by the mid-arc length of the nanoarc. The ratio between the attenuation of the fundamental and second order LSPRs is governed by the nanoarc central angle. Beneficial for plasmonic enhancement of harmonic generation, these two resonances can be tuned independently to obtain octave intervals through the design of a non-uniform arc-width profile. Because the character of the fundamental LSPR mode in nanoarcs combines an electric and a magnetic dipole, plasmonic nanoarcs with tunable resonances can serve as versatile building blocks for chiroptical and nonlinear optical devices.

Quantifying Optical Absorption of Single Plasmonic Nanoparticles and Nanoparticle Dimers Using Microstring Resonators

The wide and ever-increasing applications of thermoplasmonics demand the need for sensitive and reliable tools to probe optical absorptions of individual nanoparticles. However, most of the currently available techniques focus only on measuring the surface temperature of nanostructures in a particular medium and are either invasive or suffer from low sensitivity, lengthy calibration, or the inability to probe single structures with nanogaps. Here, we present for the first time the use of micromechanical SiN string resonators for quantifying optical absorption cross sections of individual plasmonic nanostructures. Monomers and dimers of nanospheres, nanostars, shell-isolated nanoparticles, and nanocubes are probed. A reliable data treatment method is developed to obtain the absorption cross sections as a function of responsivity across a string. The presented method exhibits an excellent sensitivity of ∼89 Hz/K. This allows quantification of optical absorption cross sections of individual plasmonic structures even when their plasmon resonance wavelengths are far from the laser excitation wavelength. The experimentally obtained optical absorption cross sections agree well with the simulations. Influencing factors including polarization, surface morphology, and nanogap size are discussed. The developed method and the obtained optical absorption profiles facilitate future development and optimization of thermoplasmonic applications.

Hybridization of singular plasmons via transformation optics

Surface plasmon resonances of metallic nanostructures offer great opportunities to guide and manipulate light on the nanoscale. In the design of novel plasmonic devices, a central topic is to clarify the intricate relationship between the resonance spectrum and the geometry of the nanostructure. Despite many advances, the design becomes quite challenging when the desired spectrum is highly complex. Here we develop a theoretical model for surface plasmons of interacting nanoparticles to reduce the complexity of the design process significantly. Our model is developed by combining plasmon hybridization theory with transformation optics, which yields an efficient way of simultaneously controlling both global and local features of the resonance spectrum. As an application, we propose a design of metasurface whose absorption spectrum can be controlled over a large class of complex patterns through only a few geometric parameters in an intuitive way. Our approach provides fundamental tools for the effective design of plasmonic metamaterials with on-demand functionality.

Strong vibrational coupling in room temperature plasmonic resonators

Strong vibrational coupling has been realized in a variety of mechanical systems. However, there have been no experimental observations of strong coupling of the acoustic modes of plasmonic nanostructures, due to rapid energy dissipation in these systems. Here we realized strong vibrational coupling in ultra-high frequency plasmonic nanoresonators by increasing the vibrational quality factors by an order of magnitude. We achieved the highest frequency quality factor products of f × Q = 1.0 × 10¹³ Hz for the fundamental mechanical modes, which exceeds the value of 0.6 × 10¹³ Hz required for ground state cooling. Avoided crossing was observed between vibrational modes of two plasmonic nanoresonators with a coupling rate of g = 7.5 ± 1.2 GHz, an order of magnitude larger than the dissipation rates. The intermodal strong coupling was consistent with theoretical calculations using a coupled oscillator model. Our results enabled a platform for future observation and control of the quantum behavior of phonon modes in metallic nanoparticles.

Strong vibrational coupling has not been observed in ultra-high frequency mechanical resonators. By engineering phonon dissipation pathways, the authors increase the vibrational quality factor to allow strong coupling observations in plasmonic nanostructures, which has implications for observation and control of quantum phonon dynamics.

Radial breathing modes coupling in plasmonic molecules

Metallic hexamer, very much the plasmonic analog of benzene molecule, provides an ideal platform to mimic modes coupling and hybridization in molecular systems. To demonstrate this, we present a detailed study on radial breathing mode (RBM) coupling in a plasmonic dual-hexamers. We excite RBMs of hexamers by symmetrically matching the polarization state of the illumination with the distribution of electric dipole moments of the dual-hexamer. It is found that the RBM coupling exhibits a nonexponential decay when the inter-hexamer separation is increased, owing to the dark mode nature of RBM. When the outer hexamer is subjected to the in-plane twisting, resonant wavelengths of two coupled RBMs as well as the coupling constant show cosine variations with the twist angle, indicating the symmetry of hexamer structure plays a critical role in the coupling of RBMs. Moreover, it is demonstrated that the coupling of RBMs is dominated by the in-plane interaction as the outer hexamer is under an out-of-plane tilting, causing convergence of resonant wavelengths of the two coupled RBMs with increasing tilt angle. Our results not only provide an insight into the plasmonic RBM coupling mechanism, but also pave the way to systematically control the spectral response of plasmonic molecules.

Optical resonance coupling in compositionally different nanocube–nanosphere heterodimers

Plasmonic nanoparticle dimers with interparticle gap distances (d) in the nanometer scale are able to produce huge electromagnetic field enhancements in the gap region, useful for novel optical applications.

Ultrafast measurements of the dynamics of single nanostructures: a review

The ability to study single particles has revolutionized nanoscience. The advantage of single particle spectroscopy measurements compared to conventional ensemble studies is that they remove averaging effects from the different sizes and shapes that are present in the samples. In time-resolved experiments this is important for unraveling homogeneous and inhomogeneous broadening effects in lifetime measurements. In this report, recent progress in the development of ultrafast time-resolved spectroscopic techniques for interrogating single nanostructures will be discussed. The techniques include far-field experiments that utilize high numerical aperture (NA) microscope objectives, near-field scanning optical microscopy (NSOM) measurements, ultrafast electron microscopy (UEM), and time-resolved x-ray diffraction experiments. Examples will be given of the application of these techniques to studying energy relaxation processes in nanoparticles, and the motion of plasmons, excitons and/or charge carriers in different types of nanostructures.

Controlling the Quality Factor of a Single Acoustic Nanoresonator by Tuning its Morphology

The mechanical vibrations of individual gold nanodisks nanopatterned on a sapphire substrate are investigated using ultrafast time-resolved optical spectroscopy. The number and characteristics of the detected acoustic modes are found to vary with nanodisk geometry. In particular, their quality factors strongly depend on nanodisk aspect ratio (i.e., diameter over height ratio), reaching a maximal value of ≈70, higher than those previously measured for substrate-supported nano-objects. The peculiarities of the detected acoustic vibrations are confirmed by finite-element simulations, and interpreted as the result of substrate-induced hybridization between the vibrational modes of a nanodisk. The present findings demonstrate novel possibilities for engineering the vibrational modes of nano-objects.

Polycrystallinity of Lithographically Fabricated Plasmonic Nanostructures Dominates Their Acoustic Vibrational Damping

The study of acoustic vibrations in nanoparticles provides unique and unparalleled insight into their mechanical properties. Electron-beam lithography of nanostructures allows precise manipulation of their acoustic vibration frequencies through control of nanoscale morphology. However, the dissipation of acoustic vibrations in this important class of nanostructures has not yet been examined. Here we report, using single-particle ultrafast transient extinction spectroscopy, the intrinsic damping dynamics in lithographically fabricated plasmonic nanostructures. We find that in stark contrast to chemically synthesized, monocrystalline nanoparticles, acoustic energy dissipation in lithographically fabricated nanostructures is solely dominated by intrinsic damping. A quality factor of Q = 11.3 ± 2.5 is observed for all 147 nanostructures, regardless of size, geometry, frequency, surface adhesion, and mode. This result indicates that the complex Young's modulus of this material is independent of frequency with its imaginary component being approximately 11 times smaller than its real part. Substrate-mediated acoustic vibration damping is strongly suppressed, despite strong binding between the glass substrate and Au nanostructures. We anticipate that these results, characterizing the optomechanical properties of lithographically fabricated metal nanostructures, will help inform their design for applications such as photoacoustic imaging agents, high-frequency resonators, and ultrafast optical switches.

Acoustic Mode Hybridization in a Single Dimer of Gold Nanoparticles

The acoustic vibrations of single monomers and dimers of gold nanoparticles were investigated by measuring for the first time their ultralow-frequency micro-Raman scattering. This experiment provides access not only to the frequency of the detected vibrational modes but also to their damping rate, which is obscured by inhomogeneous effects in measurements on ensembles of nano-objects. This allows a detailed analysis of the mechanical coupling occurring between two close nanoparticles (mediated by the polymer surrounding them) in the dimer case. Such coupling induces the hybridization of the vibrational modes of each nanoparticle, leading to the appearance in the Raman spectra of two ultralow-frequency modes corresponding to the out-of-phase longitudinal and transverse (with respect to the dimer axis) quasi-translations of the nanoparticles. Additionally, it is also shown to shift the frequency of the quadrupolar modes of the nanoparticles. Experimental results are interpreted using finite-element simulations, which enable the unambiguous identification of the detected modes and despite the simplifications made lead to a reasonable reproduction of their measured frequencies and quality factors. The demonstrated feasibility of low-frequency Raman scattering experiments on single nano-objects opens up new possibilities to improve the understanding of nanoscale vibrations with this technique being complementary with single nano-object time-resolved spectroscopy as it gives access to different vibrational modes.