Single-molecule optofluidic microsensor with interface whispering gallery modes

A temperature compensated fiber probe for highly sensitive detection in virus gene biosensing

This research presents an innovative reflective fiber optic probe structure, mutinously designed to detect H7N9 avian influenza virus gene precisely. This innovative structure skillfully combines multimode fiber (MMF) with a thin-diameter seven-core photonic crystal fiber (SCF-PCF), forming a semi-open Fabry-Pérot (FPI) cavity. This structure has demonstrated exceptional sensitivity in light intensity-refractive index (RI) response through rigorous theoretical and experimental validation. The development of a quasi-distributed parallel sensor array, which provides temperature compensation during measurements, has achieved a remarkable RI response sensitivity of up to 532.7 dB/RIU. The probe-type fiber optic sensitive unit, expertly functionalized with streptavidin, offers high specificity in detecting H7N9 avian influenza virus gene, with an impressively low detection limit of 10-2 pM. The development of this biosensor marks a significant development in biological detection, offering a practical engineering solution for achieving high sensitivity and specificity in light-intensity-modulated biosensing. Its potential for wide-ranging applications in various fields is now well-established.

Ultrasound sensing with optical microcavities

Ultrasound sensors play an important role in biomedical imaging, industrial nondestructive inspection, etc. Traditional ultrasound sensors that use piezoelectric transducers face limitations in sensitivity and spatial resolution when miniaturized, with typical sizes at the millimeter to centimeter scale. To overcome these challenges, optical ultrasound sensors have emerged as a promising alternative, offering both high sensitivity and spatial resolution. In particular, ultrasound sensors utilizing high-quality factor (Q) optical microcavities have achieved unprecedented performance in terms of sensitivity and bandwidth, while also enabling mass production on silicon chips. In this review, we focus on recent advances in ultrasound sensing applications using three types of optical microcavities: Fabry-Perot cavities, π-phase-shifted Bragg gratings, and whispering gallery mode microcavities. We provide an overview of the ultrasound sensing mechanisms employed by these microcavities and discuss the key parameters for optimizing ultrasound sensors. Furthermore, we survey recent advances in ultrasound sensing using these microcavity-based approaches, highlighting their applications in diverse detection scenarios, such as photoacoustic imaging, ranging, and particle detection. The goal of this review is to provide a comprehensive understanding of the latest advances in ultrasound sensing with optical microcavities and their potential for future development in high-performance ultrasound imaging and sensing technologies.

Thermo-Optoplasmonic Single-Molecule Sensing on Optical Microcavities

Whispering-gallery-mode (WGM) resonators are powerful instruments for single-molecule sensing in biological and biochemical investigations. WGM sensors leveraged by plasmonic nanostructures, known as optoplasmonic sensors, provide sensitivity down to single atomic ions. In this article, we describe that the response of optoplasmonic sensors upon the attachment of single protein molecules strongly depends on the intensity of WGM. At low intensity, protein binding causes red shifts of WGM resonance wavelengths, known as the reactive sensing mechanism. By contrast, blue shifts are obtained at high intensities, which we explain as thermo-optoplasmonic (TOP) sensing, where molecules transform absorbed WGM radiation into heat. To support our conclusions, we experimentally investigated seven molecules and complexes; we observed blue shifts for dye molecules, amino acids, and anomalous absorption of enzymes in the near-infrared spectral region. As an example of an application, we propose a physical model of TOP sensing that can be used for the development of single-molecule absorption spectrometers.

Lever-enabled milli-Newton mechanical force detection via a microbottle resonator

We demonstrate a milli-Newton mechanical force sensor based on a whispering gallery mode microbottle resonator (MBR). A lever model is established by coupling the MBR with a tapered fiber, whose ratio of load arm to effort arm (RLE) is flexibly adjusted to enlarge the detection range. The mechanical force is induced by attaching a capillary on the MBR stem and applying the downward displacement, which deforms the MBR's radius and thus shifts the resonance wavelength. The dependence of the capillary displacement on the mechanical force is theoretically deduced and verified. Experimentally, the sensors with different RLEs are built, and the maximum sensitivity of -10.48 pm/mN with a resolution of 40 µN is obtained. The achieved detection range is 0-4 mN, which depends on the capillary displacement and RLE of the lever. With the merits of easy fabrication and flexible structure, the proposed sensor shows great potential in biomedical and structural health monitoring.

Axially slow-variation microbubble resonators fabricated by an improved arc discharge method for strain sensing applications

In this paper, we proposed an axially slow-variation microbubble resonator fabricated by an improved arc discharge method and applied to axial strain sensing. The prepared resonators are characterized by ultra-thin wall thickness and axial slow-variation. The wall thickness was experimentally measured to reach 938 nm and maintain a quality factor of an optical mode as large as 7.36 ×107. The main factors affecting the strain sensitivity of the microbubble resonators are investigated theoretically and experimentally. Experimentally, the maximum sensitivity measured was 13.08pm/µε, which is three times higher than the microbubble resonators without this method. The device is simple to prepare and possesses ultra-thin wall thickness. It is promising for applications in high-precision sensing, such as single molecule and biological sensing.

Tailoring whispering-gallery fields in optical black hole cavities

The ability to confine light has great significance in both fundamental science and practical applications. Optical black hole (OBH) cavities show intriguing zero radiation loss and strong field confinement. In this work, we systematically explore the whispering gallery mode (WGM) in a group of generalized OBH cavities, featuring bound states and strong field confinement. The field confinement in generalized OBH cavities is revealed to be enhanced with the increase of index-modulation factors, resulting from the increase of a potential barrier. Furthermore, we reveal the anomalous external resonant modes, exhibiting fascinating field enhancement in the low-index region far beyond the cavity boundary. These anomalous WGMs are attributed to the potential bending effect and above-barrier resonance. Our work may shed light on tailoring WGM fields in gradient-index cavities and find potential applications in light coupling and optical sensing.

A Silicon-Based ROTE Sensor for High-Q and Label-Free Carcinoembryonic Antigen Detection

This paper presents a biosensor based on the resonant optical tunneling effect (ROTE) for detecting a carcinoembryonic antigen (CEA). In this design, sensing is accomplished through the interaction of the evanescent wave with the CEA immobilized on the sensor's surface. When CEA binds to the anti-CEA, it alters the effective refractive index (RI) on the sensor's surface, leading to shifts in wavelength. This shift can be identified through the cascade coupling of the FP cavity and ROTE cavity in the same mode. Experimental results further show that the shift in resonance wavelength increases with the concentration of CEA. The biosensor responded linearly to CEA concentrations ranging from 1 to 5 ng/mL with a limit of detection (LOD) of 0.5 ng/mL and a total Q factor of 9500. This research introduces a new avenue for identifying biomolecules and cancer biomarkers, which are crucial for early cancer detection.

Probing Temperature-Induced Plasmonic Nonlinearity: Unveiling Opto-Thermal Effects on Light Absorption and Near-Field Enhancement

Precise measurement and control of local heating in plasmonic nanostructures are vital for diverse nanophotonic devices. Despite significant efforts, challenges in understanding temperature-induced plasmonic nonlinearity persist, particularly in light absorption and near-field enhancement due to the absence of suitable measurement techniques. This study presents an approach allowing simultaneous measurements of light absorption and near-field enhancement through angle-resolved near-field scanning optical microscopy with iterative opto-thermal analysis. We revealed gold thin films exhibit sublinear nonlinearity in near-field enhancement due to nonlinear opto-thermal effects, while light absorption shows both sublinear and superlinear behaviors at varying thicknesses. These observations align with predictions from a simple harmonic oscillation model, in which changes in damping parameters affect light absorption and field enhancement differently. The sensitivity of our method was experimentally examined by measuring the opto-thermal responses of three-dimensional nanostructure arrays. Our findings have direct implications for advancing plasmonic applications, including photocatalysis, photovoltaics, photothermal effects, and surface-enhanced Raman spectroscopy.

Whispering-Gallery Mode Optoplasmonic Microcavities: From Advanced Single-Molecule Sensors and Microlasers to Applications in Synthetic Biology

Optical microcavities, specifically, whispering-gallery mode (WGM) microcavities, with their remarkable sensitivity to environmental changes, have been extensively employed as biosensors, enabling the detection of a wide range of biomolecules and nanoparticles. To push the limits of detection down to the most sensitive single-molecule level, plasmonic nanorods are strategically introduced to enhance the evanescent fields of WGM microcavities. This advancement of optoplasmonic WGM sensors allows for the detection of single molecules of a protein, conformational changes, and even atomic ions, marking significant contributions in single-molecule sensing. This Perspective discusses the exciting research prospects in optoplasmonic WGM sensing of single molecules, including the study of enzyme thermodynamics and kinetics, the emergence of thermo-optoplasmonic sensing, the ultrasensitive single-molecule sensing on WGM microlasers, and applications in synthetic biology.

Microsphere-Enabled Micropillar Array for Whispering Gallery Mode Virus Detection

Rapid detection of pathogens and analytes at the point of care offers an opportunity for prompt patient management and public health control. This paper reports an open microfluidic platform coupled with active whispering gallery mode (WGM) microsphere resonators for the rapid detection of influenza viruses. The WGM microsphere resonators, precoated with influenza A polyclonal antibodies, are mechanically trapped in the open micropillar array, where the evaporation-driven flow continuously transports a small volume (∼μL) of sample to the resonators without auxiliaries. Selective chemical modification of the pillar array changes surface wettability and flow pattern, which enhances the detection sensitivity of the WGM resonator-based virus sensor. The optofluidic sensing platform is able to specifically detect influenza A viruses within 15 min using a few microliters of sample and displays a linear response to different virus concentrations.

Determination of Enantiomeric Excess by Optofluidic Microlaser near Exceptional Point

Enantiomeric excess (ee) is an essential indicator of chiral drug purification in the pharmaceutical industry. However, to date the ee determination of unknown concentration enantiomers generally involves two separate techniques for chirality and concentration measurement. Here, a whispering-gallery mode (WGM) based optofluidic microlaser near exceptional point to achieve the ee determination under unknown concentration with a single technique is proposed. Exceptional point induces the unidirectional WGM lasing, providing the optofluidic microlaser with the novel capability to measure chirality by polarization, in addition to wavelength-based concentration detection. The dual-parameters detection of optofluidic microlaser empowers it to achieve ee determination of various unknown enantiomers without additional concentration measurements, a feat that is challenging to accomplish with other methods. Featuring the sensitivity enhancement and miniature structure of the WGM sensors, the obtained chiroptical response of the present approach is ≈30-fold higher than that of the conventional optical rotation-based polarimeter, and the reagent consumption is reduced by three orders of magnitude.

Low Part-Per-Trillion, Humidity Resistant Detection of Nitric Oxide Using Microtoroid Optical Resonators

The nitric oxide radical plays pivotal roles in physiological as well as atmospheric contexts. Although the detection of dissolved nitric oxide in vivo has been widely explored, highly sensitive (i.e., low part-per-trillion level), selective, and humidity-resistant detection of gaseous nitric oxide in air remains challenging. In the field, humidity can have dramatic effects on the accuracy and selectivity of gas sensors, confounding data, and leading to overestimation of gas concentration. Highly selective and humidity-resistant gaseous NO sensors based on laser-induced graphene were recently reported, displaying a limit of detection (LOD) of 8.3 ppb. Although highly sensitive (LOD = 590 ppq) single-wall carbon nanotube NO sensors have been reported, these sensors lack selectivity and humidity resistance. In this report, we disclose a highly sensitive (LOD = 2.34 ppt), selective, and humidity-resistant nitric oxide sensor based on a whispering-gallery mode microtoroid optical resonator. Excellent analyte selectivity was enabled via novel ferrocene-containing polymeric coatings synthesized via reversible addition-fragmentation chain-transfer polymerization. Utilizing a frequency locked optical whispering evanescent resonator system, the microtoroid's real-time resonance frequency shift response to nitric oxide was tracked with subfemtometer resolution. The lowest concentration experimentally detected was 6.4 ppt, which is the lowest reported to date. Additionally, the performance of the sensor remained consistent across different humidity environments. Lastly, the impact of the chemical composition and molecular weight of the novel ferrocene-containing polymeric coatings on sensing performance was evaluated. We anticipate that our results will have impact on a wide variety of fields where NO sensing is important such as medical diagnostics through exhaled breath, determination of planetary habitability, climate change, air quality monitoring, and treating cardiovascular and neurological disorders.

Submonolayer biolasers for ultrasensitive biomarker detection

Biomarker detection is key to identifying health risks. However, designing sensitive and single-use biosensors for early diagnosis remains a major challenge. Here, we report submonolayer lasers on optical fibers as ultrasensitive and disposable biosensors. Telecom optical fibers serve as distributed optical microcavities with high Q-factor, great repeatability, and ultralow cost, which enables whispering-gallery laser emission to detect biomarkers. It is found that the sensing performance strongly depends on the number of gain molecules. The submonolayer lasers obtained a six-order-of-magnitude improvement in the lower limit of detection (LOD) when compared to saturated monolayer lasers. We further achieve an ultrasensitive immunoassay for a Parkinson's disease biomarker, alpha-synuclein (α-syn), with a lower LOD of 0.32 pM in serum, which is three orders of magnitude lower than the α-syn concentration in the serum of Parkinson's disease patients. Our demonstration of submonolayer biolaser offers great potentials in high-throughput clinical diagnosis with ultimate sensitivity.

Transferable microfiber laser arrays for high-sensitivity thermal sensing

Functional microfibers have attracted extensive attention due to their potential in health monitoring, radiation cooling, power management and luminescence. Among these, polymer fiber-based microlasers have plentiful applications due to their merits of full color, high quality factor and simple fabrication. However, developing a facile approach to fabricate stable microfiber lasing devices for high-sensitivity thermal sensing is still challenging. In this research, we propose a design of a stable and transferable membrane inlaid with whispering-gallery-mode plasmon hybrid microlaser arrays for thermal sensing. By integrating plasmonic gold nanorods with polymer lasing microfiber arrays that are embedded in the polydimethylsiloxane matrix, whispering-gallery-mode lasing arrays with high quality are achieved. Based on the thermo-optical effect of the membrane, a tuning range of 1.462 nm for the lasing peak shift under temperature variation from 30.6 °C to 38.7 °C is obtained. The ultimate thermal sensing sensitivity can reach up to 0.181 nm °C-1 and the limit of detection is 0.131 °C, with a high figure of merit of 2.961 °C-1. Moreover, a stable laser linewidth can be maintained within the tuning range due to plasmon-improved photon confinement and PDMS-reduced scattering loss. This work is expected to provide a facile approach for the fabrication of high-sensitivity on-chip thermometry devices.

A whispering-gallery scanning microprobe for Raman spectroscopy and imaging

Optical whispering-gallery-mode microsensors are a promising platform for many applications, such as biomedical monitoring, magnetic sensing, and vibration detection. However, like many other micro/nanosensors, they cannot simultaneously have two critical properties - ultrahigh sensitivity and large detection area, which are desired for most sensing applications. Here, we report a novel scanning whispering-gallery-mode microprobe optimized for both features and demonstrate enhanced Raman spectroscopy, providing high-specificity information on molecular fingerprints that are important for numerous sensing applications. Combining the superiorities of whispering-gallery modes and nanoplasmonics, the microprobe exhibits a two-orders-of-magnitude sensitivity improvement over traditional plasmonics-only enhancement; this leads to molecular detection demonstrated with stronger target signals but less optical power required than surface-enhanced-Raman-spectroscopy substrates. Furthermore, the scanning microprobe greatly expands the effective detection area and realizes two-dimensional micron-resolution Raman imaging of molecular distribution. The versatile and ultrasensitive scanning microprobe configuration will thus benefit material characterization, chemical imaging, and quantum-enhanced sensing.

Multi-target detection and sizing of single nanoparticles using an optical star polygon microcavity

We present a miniaturized single nanoparticle detector that utilizes an optical star polygon microcavity with a 3 µm-radius. The microcavity supports high-quality factor resonant modes, with light localized at the corners of the star-shaped polygon, where the air region is situated. When nanoparticles are positioned at the corners of the microcavity, the light-matter interactions are enhanced. Notably, increasing the number of particles has little effect on the quality factor of the cavity, making it ideal for the simultaneous detection of multiple targets. Our numerical simulations demonstrate the high precision detection of polystyrene nanoparticles with a radius of 3 nm using this method. Furthermore, the size and number of nanoparticles can be determined by utilizing the triangular corners of the cavity as rulers. These findings represent a significant advancement in miniaturized and multi-target simultaneous nanoparticle detection. The proposed detector is expected to have a wide range of applications in various fields, including biomedicine and environmental monitoring.

Absorption-induced transmission in plasma microphotonics

Ionised gas, i.e., plasma, is a medium where electrons-ions dynamics are electrically and magnetically altered. Electric and magnetic fields can modify plasma's optical loss, refraction, and gain. Still, plasma's low pressure and large electrical fields have presented as challenges to introducing it to micro-cavities. Here we demonstrate optical microresonators, with walls thinner than an optical wavelength, that contain plasma inside them. By having an optical mode partially overlapping with plasma, we demonstrate resonantly enhanced light-plasma interactions. In detail, we measure plasma refraction going below one and plasma absorption that turns the resonator transparent. Furthermore, we photograph the plasma's micro-striations, with 35 μm wavelength, indicating magnetic fields interacting with plasma. The synergy between micro-photonics and plasma might transform micro-cavities, and electro-optical interconnects by adding additional knobs for electro-optically controlling light using currents, electric-, and magnetic-fields. Plasma might impact microphotonics by enabling new types of microlasers and electro-optical devices.

Revealing molecular diffusion dynamics in polymer microspheres by optical resonances

Understanding the diffusion of small molecules in polymer microsystems is of great interest in diverse fundamental and industrial research. Despite the rapidly advancing optical imaging and spectroscopic techniques, entities under investigation are usually limited to flat films or bulky samples. We demonstrate a route to in situ detection of diffusion dynamics in polymer micro-objects by means of optical whispering-gallery mode resonances. Through mode tracking, interactions between solvent molecules and polymer microspheres, including sorption, diffusion, and swelling can be quantitatively analyzed. A turning point of mode response is observed, while the diffusion exceeds the sub-wavelength-thick outermost layer as the radial extent of resonances and starts penetrating the inner core. The estimated solubility in the glassy polymer is consistent with the predicted value using Flory-Huggins theory. Besides, the non-Fickian contribution is analyzed in such a glassy polymer-penetrant system. Our work represents a high-precision and label-free approach to describing characteristics in diffusion dynamics.

Machine learning-assisted high-accuracy and large dynamic range thermometer in high-Q microbubble resonators

Whispering gallery mode (WGM) resonators provide an important platform for fine measurement thanks to their small size, high sensitivity, and fast response time. Nevertheless, traditional methods focus on tracking single-mode changes for measurement, and a great deal of information from other resonances is ignored and wasted. Here, we demonstrate that the proposed multimode sensing contains more Fisher information than single mode tracking and has great potential to achieve better performance. Based on a microbubble resonator, a temperature detection system has been built to systematically investigate the proposed multimode sensing method. After the multimode spectral signals are collected by the automated experimental setup, a machine learning algorithm is used to predict the unknown temperature by taking full advantage of multiple resonances. The results show the average error of 3.8 × 10^-3°C within the range from 25.00°C to 40.00°C by employing a generalized regression neural network (GRNN). In addition, we have also discussed the influence of the consumed data resource on its predicted performance, such as the amount of training data and the case of different temperate ranges between the training and test data. With high accuracy and large dynamic range, this work paves the way for WGM resonator-based intelligent optical sensing.

Unidirectional light emission in a deformed circular-side triangular microresonator

A waveguide-connected deformed circular-side triangular microresonator is proposed and fabricated. Room temperature unidirectional light emission is experimentally demonstrated in the far-field pattern with a divergence angle of 38°. Single mode lasing at 1545.4 nm is realized at an injection current of 12 mA. The emission pattern changes drastically upon the binding of a nanoparticle with radius down to several nanometers, predicting applications in electrically pumped, cost-effective, portable and highly sensitive far-field detection of nanoparticles.

Challenges and perspectives of multi-virus biosensing techniques: A review

In the context of globalization, individuals have an increased chance of being infected by multiple viruses simultaneously, thereby highlighting the importance of developing multiplexed devices. In addition to sufficient sensitivity and rapid response, multi-virus sensing techniques are expected to offer additional advantages including high throughput, one-time sampling for parallel analysis, and full automation with data visualization. In this paper, we review the optical, electrochemical, and mechanical platforms that enable multi-virus biosensing. The working mechanisms of each platform, including the detection principle, transducer configuration, bio-interface design, and detected signals, are reviewed. The advantages and limitations, as well as the challenges in implementing various detection strategies in real-life scenarios, were evaluated. Future perspectives on multiplexed biosensing techniques are critically discussed. Earlier access to multi-virus biosensors will efficiently serve for immediate pandemic control, such as in emerging SARS-CoV-2 and monkeypox cases.

Active Control of Plasmonic-Photonic Interactions in a Microbubble Cavity

Active control of light-matter interactions using nanophotonic structures is critical for new modalities for solar energy production, cavity quantum electrodynamics (QED), and sensing, particularly at the single-particle level, where it underpins the creation of tunable nanophotonic networks. Coupled plasmonic-photonic systems show great promise toward these goals because of their subwavelength spatial confinement and ultrahigh-quality factors inherited from their respective components. Here, we present a microfluidic approach using microbubble whispering-gallery mode cavities to actively control plasmonic-photonic interactions at the single-particle level. By changing the solvent in the interior of the microbubble, control can be exerted on the interior dielectric constant and, thus, on the spatial overlap between the photonic and plasmonic modes. Qualitative agreement between experiment and simulation reveals the competing roles mode overlap and mode volume play in altering coupling strengths.

A Monolithic Graphene-Functionalized Microlaser for Multispecies Gas Detection

Optical-microcavity-enhanced light-matter interaction offers a powerful tool to develop fast and precise sensing techniques, spurring applications in the detection of biochemical targets ranging from cells, nanoparticles, and large molecules. However, the intrinsic inertness of such pristine microresonators limits their spread in new fields such as gas detection. Here, a functionalized microlaser sensor is realized by depositing graphene in an erbium-doped over-modal microsphere. By using a 980 nm pump, multiple laser lines excited in different mode families of the microresonator are co-generated in a single device. The interference between these splitting mode lasers produce beat notes in the electrical domain (0.2-1.1 MHz) with sub-kHz accuracy, thanks to the graphene-induced intracavity backward scattering. This allows for lab-free multispecies gas identification from a mixture, and ultrasensitive gas detection down to individual molecule.

Free-access optomechanical liquid probes using a twin-microbottle resonator

Cavity optomechanics provides high-performance sensor technology, and the scheme is also applicable to liquid samples for biological and rheological applications. However, previously reported methods using fluidic capillary channels and liquid droplets are based on fixed-by-design structures and therefore do not allow an active free access to the samples. Here, we demonstrate an alternate technique using a probe-based architecture with a twin-microbottle resonator. The probe consists of two microbottle optomechanical resonators, where one bottle (for detection) is immersed in liquid and the other bottle (for readout) is placed in air, which retains excellent detection performance through the high optical Q (~10⁷) of the readout bottle. The scheme allows the detection of thermomechanical motion of the detection bottle as well as optomechanical drive and frequency tracking with a phase-locked loop. This technique could lead to in situ metrology at the target location in arbitrary media and could be extended to ultrasensitive biochips and rheometers.

Label-free detection of cardiac troponin-I with packaged thin-walled microbubble resonators

The measurement of cardiac troponin-I (cTnI) is widely used for diagnosing acute myocardial infarction (AMI) diseases because of its myocardial specificity. Packaged microbubble resonators with thin wall are utilized for label-free and specific detection of cTnI based on whispering gallery mode (WGM). This packaged structure can provide a good protection for the biosensor, improve the anti-interference ability of the sensor and reduce the system noise. The theoretical detection limit of the biosensors for cTnI in phosphate buffer saline (PBS) is 0.4 ag mL^-1 (0.02 a_M ). Furthermore, we demonstrated that the biosensors can be used to detect cTnI molecules in simulated serum and the theoretical detection limit is also 0.4 ag mL^-1 (0.02 a_M ). These results are much far below the clinical cut-off value and show a huge application potential for the detection of cardiac biomarkers of AMI.

Part-per-Trillion Trace Selective Gas Detection Using Frequency Locked Whispering-Gallery Mode Microtoroids

Rapid detection of toxic and hazardous gases at trace concentrations plays a vital role in industrial, battlefield, and laboratory scenarios. Of interest are both sensitive as well as highly selective sensors. Whispering-gallery mode (WGM) microresonator-based biochemical sensors are among the most sensitive sensors in existence due to their long photon confinement times. One main concern with these devices, however, is their selectivity toward specific classes of target analytes. Here, we employ frequency locked WGM microtoroid optical resonators covalently modified with various polymer coatings to selectively detect the chemical warfare agent surrogate diisopropyl methylphosphonate (DIMP) as well as the toxic industrial chemicals formaldehyde and ammonia at parts-per-trillion concentrations (304, 434, and 117 ppt, respectively). This is 1-2 orders of magnitude better than previously reported, depending on the target, except for pristine graphene and pristine carbon nanotube sensors, which demonstrate similar detection levels but in vacuum and without selectivity. Selective polymer coatings include polyethylene glycol for DIMP sensing, accessed by the modification of commercially available materials, and 3-(triethoxysilyl) propyl-terminated polyvinyl acetate (PVAc) for ammonia sensing. Notably, we developed for the first time an efficient one-pot procedure to access 3-(triethoxysilyl) propyl-terminated PVAc that utilizes cobalt-mediated living radical polymerization and a nitroxyl polymer-terminating agent. Alkaline hydrolysis of PVAc coatings to form polyvinyl alcohol coatings directly bound to the microtoroid proved to be reliable and reproducible, leading to WGM sensors capable of the rapid and selective detection of formaldehyde vapors. The selectivity of these three polymer coatings as sensing media was predicted, in part, based on their functional group content and known reactivity patterns with the target analytes. Furthermore, we demonstrate that microtoroids coated with a mixture of polymers can serve as an all-in-one sensor that can detect multiple agents. We anticipate that our results will facilitate rapid early detection of chemical agents, as well as their surrogates and precursors.

High-Q asymmetrically cladded silicon nitride 1D photonic crystals cavities and hybrid external cavity lasers for sensing in air and liquids

In this paper we show a novel design of high Q-factor silicon nitride (SiN) 1D photonic crystal (PhC) cavities side-coupled to curved waveguides, operating with both silica and air cladding. The engineering of the etched 1D PhC cavity sidewalls angle allows for high Q-factors over a wide range of upper cladding compositions, and the achievement of the highest calculated Q-factor for non-suspended asymmetric SiN PhC structures. We show the employment of these type of SiN PhC cavities in hybrid external cavity laser (HECL) configuration, with mode-hop free single mode laser operation over a broad range of injected currents (from 25 mA to 65 mA), milliwatts of power output (up to 9 mW) and side-mode suppression ratios in the range of 40 dB. We demonstrate the operation of these devices as compact and energy efficient optical sensors that respond to refractive index changes in the surrounding medium the measurement of sodium chloride (from 0% to 25%) and sucrose (from 0% to 25%) in aqueous solution. In HECL configuration, the RI sensor exhibits a 2 orders of magnitude improvement in detection limit compared to the passive microcavity. We also discuss the possibility for applying these devices as novel transducers for refractive index changes that are induced by analyte specific absorption of infrared radiation by the target analytes present in gas or liquid phase.

Packaged optofluidic microbottle resonator for high-sensitivity bidirectional magnetic field sensing

We demonstrate a high-sensitivity bidirectional magnetic field sensor based on a packaged optofluidic microbottle resonator (OFMBR) filled with magnetic fluid (MF). The relationship between sensitivity and different wall thicknesses and radial modes of OFMBR is theoretically analyzed. Then the thin-wall OFMBR is fabricated by etching a capillary with the fusion discharge process. The OFMBR and tapered fiber is packaged with a portable and robust coupling configuration. By applying perpendicular or parallel magnetic field directions to the OFMBR, opposite refractive index responses of the MF can be obtained, with resonant wavelengths redshifted or blueshifted as the magnetic field intensity is increased. A magnetic field sensitivity of 98.23 pm/mT can be obtained by using the second-order radial mode when the magnetic field is perpendicular to the packaged OFMBR. When the magnetic field is parallel to the packaged OFMBR, the sensitivity is -304.80 pm/mT by using the third-order radial mode and the detection limit reaches 0.0656 mT. The proposed sensor has the advantages of easy fabrication, high sensitivity, and reliability, showing a great potential in bidirectional magnetic field application.

Optical Whispering-Gallery-Mode Microbubble Sensors

Whispering-gallery-mode (WGM) microbubble resonators are ideal optical sensors due to their high quality factor, small mode volume, high optical energy density, and geometry/design/structure (i.e., hollow microfluidic channels). When used in combination with microfluidic technologies, WGM microbubble resonators can be applied in chemical and biological sensing due to strong light–matter interactions. The detection of ultra-low concentrations over a large dynamic range is possible due to their high sensitivity, which has significance for environmental monitoring and applications in life-science. Furthermore, WGM microbubble resonators have also been widely used for physical sensing, such as to detect changes in temperature, stress, pressure, flow rate, magnetic field and ultrasound. In this article, we systematically review and summarize the sensing mechanisms, fabrication and packing methods, and various applications of optofluidic WGM microbubble resonators. The challenges of rapid production and practical applications of WGM microbubble resonators are also discussed.