Intermediate filaments in alpha-keratins

Strain and Strain Recovery of Human Hair from the Nano- to the Macroscale

In this study, in operandi SAXS experiments were conducted on samples of human hair with a varying degree of strain (2% within the elastic region and 10% beyond). Four different features in the SAXS patterns were evaluated: The intermediate filament distance perpendicular to and the distance from the meridional arc in the load direction, as well as the distances of the lipid bilayer peak in and perpendicular to the load direction. From the literature, one concludes that polar lipids in the cuticle are the origin of the lipid peak in the SAXS pattern, and this study shows that the observed strain in the lipids is much lower than in the intermediate filaments. We support these findings with SEM micrographs, which show that the scales in the cuticle deform much less than the cortex. The observed deformation of the intermediate filaments is very high, about 70% of the macrostrain, and the ratio of the transverse strain to the longitudinal strain at the nanoscale gives a Poisson ratio of νnano = 0.44, which is typical for soft matter. This work also finds that by varying the time period between two strain cycles, the typical strain recovery time is about 1000 min, i.e., one day. After this period, the structure is nearly identical to the initial structure, which suggests an interpretation that this is the typical time for the self-healing of hair after mechanical treatment.

Bioinspired Additive Manufacturing of Hierarchical Materials: From Biostructures to Functions

Throughout billions of years, biological systems have evolved sophisticated, multiscale hierarchical structures to adapt to changing environments. Biomaterials are synthesized under mild conditions through a bottom-up self-assembly process, utilizing substances from the surrounding environment, and meanwhile are regulated by genes and proteins. Additive manufacturing, which mimics this natural process, provides a promising approach to developing new materials with advantageous properties similar to natural biological materials. This review presents an overview of natural biomaterials, emphasizing their chemical and structural compositions at various scales, from the nanoscale to the macroscale, and the key mechanisms underlying their properties. Additionally, this review describes the designs, preparations, and applications of bioinspired multifunctional materials produced through additive manufacturing at different scales, including nano, micro, micro-macro, and macro levels. The review highlights the potential of bioinspired additive manufacturing to develop new functional materials and insights into future directions and prospects in this field. By summarizing the characteristics of natural biomaterials and their synthetic counterparts, this review inspires the development of new materials that can be utilized in various applications.

Insights into the keratin efficient degradation mechanism mediated by Bacillus sp. CN2 based on integrating functional degradomics

BACKGROUND

Keratin, the main component of chicken feather, is the third most abundant material after cellulose and chitin. Keratin can be converted into high-value compounds and is considered a potential high-quality protein supplement; However, its recalcitrance makes its breakdown a challenge, and the mechanisms of action of keratinolytic proteases-mediated keratinous substrates degradation are not yet fully elucidated. Bacillus sp. CN2, having many protease-coding genes, is a dominant species in keratin-rich materials environments. To explore the degradation patterns of feather keratin, in this study, we investigated the characteristics of feather degradation by strain CN2 based on the functional-degradomics technology.

RESULTS

Bacillus sp. CN2 showed strong feather keratin degradation activities, which could degrade native feathers efficiently resulting in 86.70% weight loss in 24 h, along with the production of 195.05 ± 6.65 U/mL keratinases at 48 h, and the release of 0.40 mg/mL soluble proteins at 60 h. The extracellular protease consortium had wide substrate specificity and exhibited excellent biodegradability toward soluble and insoluble proteins. Importantly, analysis of the extracellular proteome revealed the presence of a highly-efficient keratin degradation system. Firstly, T3 γ-glutamyltransferase provides a reductive force to break the dense disulfide bond structure of keratin. Then S8B serine endopeptidases first hydrolyze keratin to expose more cleavage sites. Finally, keratin is degraded into small peptides under the synergistic action of proteases such as M4, S8C, and S8A. Consistent with this, high-performance liquid chromatography (HPLC) and amino acid analysis showed that the feather keratin hydrolysate contained a large number of soluble peptides and essential amino acids.

CONCLUSIONS

The specific expression of γ-glutamyltransferase and co-secretion of endopeptidase and exopeptidase by the Bacillus sp. CN2 play an important role in feather keratin degradation. This insight increases our understanding of the keratinous substrate degradation and may inspire the design of the optimal enzyme cocktails for more efficient exploration of protein resources in industrial applications.

Evolution of a remarkable intracellular polymer and extreme cell allometry in hagfishes

The size of animal cells rarely scales with body size, likely due to biophysical and physiological constraints.^1,2 In hagfishes, gland thread cells (GTCs) each produce a silk-like proteinaceous fiber called a slime thread.^3,4 The slime threads impart strength to a hagfish's defensive slime and thus are potentially subject to selection on their function outside of the body.^5-8 Body size is of fundamental importance in predator-prey interactions, which led us to hypothesize that larger hagfishes produce longer and stronger slime threads than smaller ones.⁹ Here, by sampling a range of sizes of hagfish from 19 species, we systematically examined the scaling of GTC and slime-thread dimensions with body size within both phylogenetic and ontogenetic contexts. We found that the length of GTCs varied between 40 and 250 μm and scaled positively with body size, exhibiting an allometric exponent greater than those in other animal cells. Correspondingly, larger hagfishes produce longer and thicker slime threads and thus are equipped to defend against larger predators. With diameter and length varying 4-fold (0.7-4 μm and 5-22 cm, respectively) over a body-size range of 10-128 cm, the slime threads characterize the largest intracellular polymers known in biology. Our results suggest selection for stronger defensive slime in larger hagfishes has driven the evolution of extreme size and allometry of GTCs.

Properties and Degradation Performances of Biodegradable Poly(lactic acid)/Poly(3-hydroxybutyrate) Blends and Keratin Composites

From environmental aspects, the recovery of keratin waste is one of the important needs and therefore also one of the current topics of many research groups. Here, the keratin hydrolysate after basic hydrolysis was used as a filler in plasticized polylactic acid/poly(3-hydroxybutyrate) blend under loading in the range of 1–20 wt%. The composites were characterized by infrared spectroscopy, and the effect of keratin on changes in molar masses of matrices during processing was investigated using gel permeation chromatography (GPC). Thermal properties of the composites were investigated using thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The effect of keratin loading on the mechanical properties of composite was investigated by tensile test and dynamic mechanical thermal analysis. Hydrolytic degradation of matrices and composites was investigated by the determination of extractable product amounts, GPC, DSC and NMR. Finally, microbial growth and degradation were investigated. It was found that incorporation of keratin in plasticized PLA/PHB blend provides material with good thermal and mechanical properties and improved degradation under common environmental conditions, indicating its possible application in agriculture and/or packaging.

From reductionism to synthesis: The case of hagfish slime

Reductionist strategies aim to understand the mechanisms of complex systems by studying individual parts and their interactions. In this review, we discuss how reductionist approaches have shed light on the structure, function, and production of a complex biomaterial - hagfish defensive slime. Hagfish slime is an extremely dilute hydrogel-like material composed of seawater, mucus, and silk-like proteins that can deploy rapidly. Despite being composed almost entirely of water, hagfish slime has remarkable physical properties, including high strength and toughness. While hagfish slime has a promising future in biomimetics, including the development of eco-friendly high-performance fibers, recreating hagfish slime in the lab has been a difficult challenge. Over the past two decades, reductionist experiments have provided a wealth of information about the individual components of hagfish slime. However, a reductionist approach provides a limited understanding because hagfish defensive slime, like most biological phenomena, is more than just the sum of its parts. We end by providing some thoughts about how the knowledge generated in the last few decades might be synthesized into a working model that can explain hagfish slime structure and function.

Structure of Keratin

Keratins, as a group of insoluble and filament-forming proteins, mainly exist in certain epithelial cells of vertebrates. Keratinous materials are made up of cells filled with keratins, while they are the toughest biological materials such as the human hair, wool and horns of mammals and feathers, claws, and beaks of birds and reptiles which usually used for protection, defense, hunting and as armor. They generally exhibit a sophisticated hierarchical structure ranging from nanoscale to centimeter-scale: polypeptide chain structures, intermediated filaments/matrix structures, and lamellar structures. Therefore, more and more attention has been paid to the investigation of the relationship between structure and properties of keratins, and a series of biomimetic materials based on keratin came into being. In this chapter, we mainly introduce the hierarchical structure, the secondary structure, and the molecular structure of keratins, including α- and β-keratin, to promote the development of novel keratin-based biomimetic materials designs.

Porosity at Different Structural Levels in Human and Yak Belly Hair and Its Effect on Hair Dyeing

Yak belly hair was proposed as a cheap substitute for human hair for the development of hair dyes, as its chemical composition closely resembles human hair in Raman spectroscopy. The absence of melanin in yak belly hair also leads to a strong reduction of fluorescence in Raman measurements, which is advantageous for the investigation of the effectivity of hair dyes. To assess the suitability for replacing human hair, we analyzed similarities and differences of both hair types with a variety of methods: Raman spectroscopy, to obtain molecular information; small-angle X-ray scattering to determine the nanostructure, such as intermediate filament distance, distance of lipid layers and nanoporosity; optical and scanning electron microscopy of surfaces and cross sections to determine the porosity at the microstructural level; and density measurements and tensile tests to determine the macroscopic structure, macroporosity and mechanical properties. Both types of hair are similar on a molecular scale, but differ on other length scales: yak belly hair has a smaller intermediate filament distance on the nanoscale. Most striking is a higher porosity of yak belly hair on all hierarchical levels, and a lower Young’s modulus on the macroscale. In addition to the higher porosity, yak belly hair has fewer overlapping scales of keratin, which further eases the uptake of coloring. This makes, on the other hand, a comparison of coloring processes difficult, and limits the usefulness of yak belly hair as a substitute for human hair.

Borrowing From Nature: Biopolymers and Biocomposites as Smart Wound Care Materials

Wound repair is a complex and tightly regulated physiological process, involving the activation of various cell types throughout each subsequent step (homeostasis, inflammation, proliferation, and tissue remodeling). Any impairment within the correct sequence of the healing events could lead to chronic wounds, with potential effects on the patience quality of life, and consequent fallouts on the wound care management. Nature itself can be of inspiration for the development of fully biodegradable materials, presenting enhanced bioactive potentialities, and sustainability. Naturally-derived biopolymers are nowadays considered smart materials. They provide a versatile and tunable platform to design the appropriate extracellular matrix able to support tissue regeneration, while contrasting the onset of adverse events. In the past decades, fabrication of bioactive materials based on natural polymers, either of protein derivation or polysaccharide-based, has been extensively exploited to tackle wound-healing related problematics. However, in today's World the exclusive use of such materials is becoming an urgent challenge, to meet the demand of environmentally sustainable technologies to support our future needs, including applications in the fields of healthcare and wound management. In the following, we will briefly introduce the main physico-chemical and biological properties of some protein-based biopolymers and some naturally-derived polysaccharides. Moreover, we will present some of the recent technological processing and green fabrication approaches of novel composite materials based on these biopolymers, with particular attention on their applications in the skin tissue repair field. Lastly, we will highlight promising future perspectives for the development of a new generation of environmentally-friendly, naturally-derived, smart wound dressings.

Direct evidence supporting the existence of a helical dislocation in protofilament packing in the intermediate filaments of oxidized trichocyte keratin

The X-ray diffraction patterns of quill and hair, as well as other trichocyte keratin appendages, contain meridional reflections that can be indexed on an axial repeat of 470 Å. Unusually, however, many of the expected orders are not observed. A possible explanation, proposed by Fraser and MacRae (1983), was that the intermediate filaments (IF) that constitute the fibrillar component of the filament/matrix texture consist of 4-chain protofilaments arranged on a surface lattice subject to a helical dislocation. The radial projection of the resulting 8-protofilament ribbon was defined in terms of a two-dimensional unit cell characterized by vectors (a, b) with axial projections z_a ∼ 74 Å and z_b ∼ 198 Å. This situation resembles that found in microtubules, where helical dislocations in subunit packing are also encountered, leading to a so-called "seam" along their length (Metoz and Wade, 1997). In keratin, however, the protofilaments are helical so the seam is inclined to the axis of the IF. Here we report details of the Patterson function that provides independent evidence for both the helical dislocation and the dimensions of the surface lattice. In addition, the observed meridional X-ray amplitudes have been compared with those predicted by various models of the axial distribution of electron density. A new model, adapted from one previously proposed, fits the data significantly better than has heretofore proved possible. An interpretation of the model in terms of either specific keratin-associated-protein (KAP) binding or the retention of IF symmetry by a portion of the head and/or tail domains is suggested.

Moisture, anisotropy, stress state, and strain rate effects on bighorn sheep horn keratin mechanical properties

This paper investigates the effects of moisture, anisotropy, stress state, and strain rate on the mechanical properties of the bighorn sheep (Ovis Canadensis) horn keratin. The horns consist of fibrous keratin tubules extending along the length of the horn and are contained within an amorphous keratin matrix. Samples were tested in the rehydrated (35wt% water) and ambient dry (10wt% water) conditions along the longitudinal and radial directions under tension and compression. Increased moisture content was found to increase ductility and decrease strength, as well as alter the stress state dependent nature of the material. The horn keratin demonstrates a significant strain rate dependence in both tension and compression, and also showed increased energy absorption in the hydrated condition at high strain rates when compared to quasi-static data, with increases of 114% in tension and 192% in compression. Compressive failure occurred by lamellar buckling in the longitudinal orientation followed by shear delamination. Tensile failure in the longitudinal orientation occurred by lamellar delamination combined with tubule pullout and fracture. The structure-property relationships quantified here for bighorn sheep horn keratin can be used to help validate finite element simulations of ram's impacting each other as well as being useful for other analysis regarding horn keratin on other animals.

STATEMENT OF SIGNIFICANCE

The horn of the bighorn sheep is an anisotropic composite composed of keratin that is highly sensitive to moisture content. Keratin is also found in many other animals in the form of hooves, claws, beaks, and feathers. Only one previous study contains high rate experimental data, which was performed in the dry condition and only in compression. Considering the bighorn sheep horns' protective role in high speed impacts along with the moisture and strain rate sensitivity, more high strain rate data is needed to fully characterize and model the material. This study provides high strain rate results demonstrating the effects of moisture, anisotropy, and stress state. As a result, the comprehensive data allows modeling efforts to be greatly improved.

Structural Transition of Trichocyte Keratin Intermediate Filaments During Development in the Hair Follicle

The intermediate filaments (IF) in trichocyte (hard α-) keratin are unique amongst the various classes of IF in having not one but two topologically-distinct structures. The first is formed at an early stage of hair development in a reducing environment within the cells in the lower part of the follicle. The second structure occurs at a later stage of hair development in the upper part of the follicle, where there is a transition to an oxidizing environment. Crosslinking studies reveal that molecular slippage occurs within the IF upon oxidation and that this results in many cysteine residues lying in near axial alignment, thereby facilitating disulphide bond formation. The disulphide bonds so formed stabilize the assembly of IF molecules and convert the keratin fibre into a tough, resilient and insoluble structure suitable for its function in vivo as a thermo-regulator and a protector of the animal against its external environment.

Molecular modeling and structural characterization of a high glycine–tyrosine hair keratin associated protein

For the first time, the molecular structure of a hair cortical matrix protein KAP8.1 has been characterised using modelling and spectroscopy.

Preparation and characterization of DOX loaded keratin nanoparticles for pH/GSH dual responsive release

Smart drug carriers are the current need of the hour in controlled drug delivery applications. In this work, pH and redox dual responsive keratin based drug-loaded nanoparticles (KDNPs) were fabricated through two-step strategies. Keratin nanoparticles were first prepared by desolvation method and chemical crosslinking, followed by electrostatic adsorbing doxorubicin (DOX) to afford drug loaded keratin nanoparticles (KDNPs). The size, size distribution, and morphology of the KDNPs were characterized with dynamic light scattering (DLS) and Scan electronic microscope (SEM). Drug delivery profiles showed that KDNPs exhibited pH and glutathione (GSH) dual-responsive characters. Under tumor tissue/cell microenvironments (more acidic and high GSH level), KDNPs tended to accumulate at the tumor region through a potential enhanced permeability and retention (EPR) effect and perform surface negative-to-positive charge conversion. Hemolysis assay indicated that KDNPs had good blood compatibility. Cellular uptake assay demonstrated that KDNPs could be internalized by A 549 cells through endocytosis. Intriguingly, KDNPs were capable of promoting nitric oxide (NO) release from endogenous donor of S-nitrosoglutathione in the presence of GSH. All of these results demonstrated that keratin based drug carriers had potential for drug/NO delivery and cancer therapy in clinical medicine.

The Hagfish Gland Thread Cell: A Fiber-Producing Cell Involved in Predator Defense

Fibers are ubiquitous in biology, and include tensile materials produced by specialized glands (such as silks), extracellular fibrils that reinforce exoskeletons and connective tissues (such as chitin and collagen), as well as intracellular filaments that make up the metazoan cytoskeleton (such as F-actin, microtubules, and intermediate filaments). Hagfish gland thread cells are unique in that they produce a high aspect ratio fiber from cytoskeletal building blocks within the confines of their cytoplasm. These threads are elaborately coiled into structures that readily unravel when they are ejected into seawater from the slime glands. In this review we summarize what is currently known about the structure and function of gland thread cells and we speculate about the mechanism that these cells use to produce a mechanically robust fiber that is almost one hundred thousand times longer than it is wide. We propose that a key feature of this mechanism involves the unidirectional rotation of the cell’s nucleus, which would serve to twist disorganized filaments into a coherent thread and impart a torsional stress on the thread that would both facilitate coiling and drive energetic unravelling in seawater.

The structure of people's hair

Hair is a filamentous biomaterial consisting mainly of proteins in particular keratin. The structure of human hair is well known: the medulla is a loosely packed, disordered region near the centre of the hair surrounded by the cortex, which contains the major part of the fibre mass, mainly consisting of keratin proteins and structural lipids. The cortex is surrounded by the cuticle, a layer of dead, overlapping cells forming a protective layer around the hair. The corresponding structures have been studied extensively using a variety of different techniques, such as light, electron and atomic force microscopes, and also X-ray diffraction. We were interested in the question how much the molecular hair structure differs from person to person, between male and female hair, hair of different appearances such as colour and waviness. We included hair from parent and child, identical and fraternal twins in the study to see if genetically similar hair would show similar structural features.

The molecular structure of the hair samples was studied using high-resolution X-ray diffraction, which covers length scales from molecules up to the organization of secondary structures. Signals due to the coiled-coil phase of α-helical keratin proteins, intermediate keratin filaments in the cortex and from the lipid layers in the cell membrane complex were observed in the specimen of all individuals, with very small deviations. Despite the relatively small number of individuals (12) included in this study, some conclusions can be drawn. While the general features were observed in all individuals and the corresponding molecular structures were almost identical, additional signals were observed in some specimen and assigned to different types of lipids in the cell membrane complex. Genetics seem to play a role in this composition as identical patterns were observed in hair from father and daughter and identical twins, however, not for fraternal twins. Identification and characterization of these features is an important step towards the detection of abnormalities in the molecular structure of hair as a potential diagnostic tool for certain diseases.

Extraction and characterization of keratin from bovine hoof: A potential material for biomedical applications

Keratin from the hoof is a less explored source for making valuable products. In this paper we present the extraction of pure keratin from bovine hooves and characterized them to better address the possible exploitation of this bio-resource as an alternative material for tissue engineering applications. The keratin protein from the pulverized hooves was extracted by reduction, which was observed to be pure, and two polypeptide chains of molecular weight in the range of 45–50 and 55–60 KDa were determined using SDS-PAGE assay. FTIR analysis complementing circular dichroism (CD) data, established that hoof keratin predominantly adopted α-helical conformation with admixture of β-sheet. The keratin was shown to have appreciably high denaturation temperature (215°C) as indicated by differential scanning calorimetric (DSC) analysis. Thermogravimetric analysis (TGA) also showed the retention of 50% of the original weight of the sample even at a temperature of 346°C. The keratin from the hoof had been observed to be biocompatible when analyzed with MTT assay using fibroblast cells, showing more than 90% cell viability. Hence, hoof keratin would be useful for high value biomedical applications.

Failure analysis of porcupine quills under axial compression reveals their mechanical response during buckling

Porcupine quills are natural structures formed by a thin walled conical shell and an inner foam core. Axial compression tests, differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and Fourier transform infrared spectroscopy (FT-IR) were all used to compare the characteristics and mechanical properties of porcupine quills with and without core. The failure mechanisms that occur during buckling were analyzed by scanning electron microscopy (SEM), and it was found that delamination buckling is mostly responsible for the decrease in the measured buckling stress of the quills with regard to predicted theoretical values. Our analysis also confirmed that the foam core works as an energy dissipater improving the mechanical response of an empty cylindrical shell, retarding the onset of buckling as well as producing a step wise decrease in force after buckling, instead of an instantaneous decrease in force typical for specimens without core. Cell collapse and cell densification in the inner foam core were identified as the key mechanisms that allow for energy absorption during buckling.

Shaping the skin: the interplay of mesoscale geometry and corneocyte swelling

The stratum corneum, the outer layer of mammalian skin, provides a remarkable barrier to the external environment, yet it has highly variable permeability properties where it actively mediates between inside and out. On prolonged exposure to water, swelling of the corneocytes (skin cells composed of keratin intermediate filaments) is the key process by which the stratum corneum controls permeability and mechanics. As for many biological systems with intricate function, the mesoscale geometry is optimized to provide functionality from basic physical principles. Here we show that a key mechanism of corneocyte swelling is the interplay of mesoscale geometry and thermodynamics: given helical tubes with woven geometry equivalent to the keratin intermediate filament arrangement, the balance of solvation free energy and elasticity induces swelling of the system, importantly with complete reversibility. Our result remarkably replicates macroscopic experimental data of native through to fully hydrated corneocytes. This finding not only highlights the importance of patterns and morphology in nature but also gives valuable insight into the functionality of skin.

Oral cytokeratins in health and disease

The dynamics of oral mucosa is known by its inherent defensive nature. Certain areas demand tough shield when subjected to mechanical insults. This is met by structural scaffolding material referred as cytoskeleton comprised of intracellular protein filaments called cytokeratins in the surface squames of oral epithelia. They also equally contribute towards the architecture of odontogenic apparatus and salivary gland. Differentiation of epithelial cells within stratified epithelia regulates the expression of specific keratin gene. Any mutation in, or autoantibodies to keratins, desmosomal and cornified envelope proteins is translated into genetic and acquired human disorders. Sound knowledge of structural proteins, their expression, distribution and function plays a vital role in acquainting with these disorders and their application as differentiation markers. Thus, they form an integral aid in diagnostic pathology and may be instrumental in the future interventions by gene therapy. This review focuses on basics to current updates on oral cytokeratins with an emphasis on the genetic and acquired disorders of cytokeratins with oral implications.

Microstructure and mechanical properties of horns derived from three domestic bovines

The microstructure and mechanical properties of horns derived from three domestic bovines (buffalo, cattle and sheep) were examined. The effects of water content, sampling position and orientation of three bovid horns on mechanical properties were systematically investigated by uniaxial tension and micron indentation tests. Meanwhile, the material composition and metal element contents were determined by Raman spectroscopy and elemental analysis respectively, and the microstructures of the horns were measured by scanning electron microscopy (SEM). Results show that the mechanical properties of horns have negative correlation with water contents and depend on sampling position and orientation. The spatial variations of the mechanical properties in horns are attributed to the different keratinization degrees in the proximal, middle and distal parts. And the mechanical properties of horns in the longitudinal direction are better than those in transverse. Among the three kinds of horns, the mechanical properties of buffalo horn are the best, followed by cattle horn, and those in sheep horn are the worst. This is due to the differences in material composition, metal element, and the microstructures of the horns. But the mechanical properties of buffalo horns are not dependent on the source of the buffalo. Therefore, regular engineered buffalo keratinous materials with standard mechanical properties can be obtained from different buffalo horns by using proper preparation methods.

Structure-property relationships of meta-kerateine biomaterials derived from human hair

The structure-property relationships of kerateine materials were studied by separating crude hair extracts into two protein sub-fractions, referred to as α- and γ-kerateines, followed by their de novo recombination into meta-kerateine hydrogels, sponges and films. The kerateine fractions were characterized using electrophoresis and mass spectrometry, which revealed that the α-fraction contained complexes of type I and type II keratins and that the γ-fraction was primarily protein fragments of the α-fraction along with three proteins of the KAP-1 family. Meta-kerateine materials with increased amounts of γ-kerateines showed diminished physical, mechanical and biological characteristics. Most notably, materials with higher γ-content formed less elastic and less solid-like hydrogels and sponges that were less hydrolytically stable. In addition, a model biological assay showed that meta-kerateine films with greater amounts of γ-kerateines were less supportive of hepatocyte attachment. Investigation into the mechanism of attachment revealed that hepatocyte adhesion to meta-kerateines is not mediated by the β1 integrin subunit, despite the presence of LDV binding motifs within the type I α-keratins. This work to define the role of protein composition on biomaterial function is essential for the optimization of keratin biomaterials for biomedical applications.

From three-dimensional weavings to swollen corneocytes

A novel technique to generate three-dimensional Euclidean weavings, composed of close-packed, periodic arrays of one-dimensional fibres, is described. Some of these weavings are shown to dilate by simple shape changes of the constituent fibres (such as fibre straightening). The free volume within a chiral cubic example of a dilatant weaving, the ideal conformation of the G(129) weaving related to the Σ(+) rod packing, expands more than fivefold on filament straightening. This remarkable three-dimensional weaving, therefore, allows an unprecedented variation of packing density without loss of structural rigidity and is an attractive design target for materials. We propose that the G(129) weaving (ideal Σ(+) weaving) is formed by keratin fibres in the outermost layer of mammalian skin, probably templated by a folded membrane.

The effects of water and microstructure on the mechanical properties of bighorn sheep (Ovis canadensis) horn keratin

The function of the bighorn sheep horn prompted quantification of the various parametric effects important to the microstructure and mechanical property relationships of this horn. These parameters included analysis of the stress-state dependence with the horn keratin tested under tension and compression, the anisotropy of the material structure and mechanical behavior, the spatial location along the horn, and the wet-dry horn behavior. The mechanical properties of interest were the elastic moduli, yield strength, ultimate strength, failure strain and hardness. The results showed that water has a more significant effect on the mechanical behavior of ram horn more than the anisotropy, location along the horn and the type of loading state. All of these parametric effects showed that the horn microstructure and mechanical properties were similar to those of long-fiber composites. In the ambient dry condition (10 wt.% water), the longitudinal elastic modulus, yield strength and failure strain were measured to be 4.0 G Pa, 62 MPa and 4%, respectively, and the transverse elastic modulus, yield strength and failure strain were 2.9 GPa, 37 MPa and 2%, respectively. In the wet condition (35 wt.% water), horn behaves more like an isotropic material; the elastic modulus, yield strength and failure strain were determined to be 0.6G Pa, 10 MPa and 60%, respectively.

A Review of Keratin-Based Biomaterials for Biomedical Applications

Advances in the extraction, purification, and characterization of keratin proteins from hair and wool fibers over the past century have led to the development of a keratin-based biomaterials platform. Like many naturally-derived biomolecules, keratins have intrinsic biological activity and biocompatibility. In addition, extracted keratins are capable of forming self-assembled structures that regulate cellular recognition and behavior. These qualities have led to the development of keratin biomaterials with applications in wound healing, drug delivery, tissue engineering, trauma and medical devices. This review discusses the history of keratin research and the advancement of keratin biomaterials for biomedical applications.

Experimental study on the mechanical properties of the horn sheaths from cattle

Bovine horn is composed of a sheath of keratin overlying a bony core. Previous studies of the bovine horn sheath have focused mainly on its morphology and compositions. In the present paper, we performed a series of uniaxial tension, three-point bending, and fracture tests to investigate the structural and mechanical properties of the horn sheaths from subadult cattle, Bos taurus. The effects of hydration on the mechanical properties were examined and their variations along the longitudinal direction of the horn sheath were addressed. Scanning electron microscopy of the fracture surfaces showed that the horn sheath has a layered structure and, more interestingly, the laminae have a rippled appearance. The Young's modulus and tensile strength increase from 850 MPa and 40 MPa at 19% water content to 2.3 GPa and 154 MPa at 0% water content, respectively. The Poisson's ratio of the horn sheath was about 0.38. The critical stress intensity factor was about 4.76 MPa m1/2 at an intermediate hydration (8% water content), greater than that at 0% water content (3.86 MPa m1/2) and 19% water content (2.56 MPa m1/2). The bending properties of the samples varied along the length of the horn. The mean flexural moduli of the specimens in the distal, middle and proximal parts were about 6.26 GPa, 5.93 GPa and 4.98 GPa, respectively; whereas the mean yield strength in the distal segment was about 152.4 MPa, distinctly higher than that in the middle (135.7 MPa) and proximal parts (116.4 MPa). This study deepens our understanding of the relationships among optimal structure, property and function of cattle horn sheaths.

Hard alpha-keratin degradation inside a tissue under high flux X-ray synchrotron micro-beam: a multi-scale time-resolved study

X-rays interact strongly with biological organisms. Synchrotron radiation sources deliver very intense X-ray photon fluxes within micro- or submicro cross-section beams, resulting in doses larger than the MGy. The relevance of synchrotron radiation analyses of biological materials is therefore questionable since such doses, million times higher than the ones used in radiotherapy, can cause huge damages in tissues, with regard to not only DNA, but also proteic and lipid organizations. Very few data concerning the effect of very high X-ray doses in tissues are available in the literature. We present here an analysis of the structural phenomena which occur when the model tissue of human hair is irradiated by a synchrotron X-ray micro-beam. The choice of hair is supported by its hierarchical and partially ordered keratin structure which can be analysed inside the tissue by X-ray diffraction. To assess the damages caused by hard X-ray micro-beams (1 microm(2) cross-section), short exposure time scattering SAXS/WAXS patterns have been recorded at beamline ID13 (ESRF) after various irradiation times. Various modifications of the scattering patterns are observed, they provide fine insight of the radiation damages at various hierarchical levels and also unexpectedly provide information about the stability of the various hierarchical structural levels. It appears that the molecular level, i.e. the alpha helices which are stabilized by hydrogen bonds and the alpha-helical coiled coils which are stabilized by hydrophobic interactions, is more sensitive to radiation than the supramolecular architecture of the keratin filament and the filament packing within the keratin associated proteins matrix, which is stabilized by disulphide bonds.

In vivo formation steps of the hard alpha-keratin intermediate filament along a hair follicle: evidence for structural polymorphism

Several aspects of the intermediate filaments' molecular architecture remain mysterious despite decades of study. The growth process and the final architecture may depend on the physical, chemical, and biochemical environment. Aiming at clarifying this issue, we have revisited the structure of the human hair follicle by means of X-ray microdiffraction. We conclude that the histology-based growth zones along the follicle are correlated to the fine architecture of the filaments deduced from X-ray microdiffraction. Our analysis reveals the existence of two major polymorph intermediate filament architectures. Just above the bulb, the filaments are characterized by a diameter of 100 Angstroms and a low-density core. The following zone upwards is characterized by the lateral aggregation of the filaments into a compact network of filaments, by a contraction of their diameter (to 75 Angstroms) and by the setting up of a long-range longitudinal ordering. In the upper zone, the small structural change associated with the tissue hardening likely concerns the terminal domains. The architecture of the intermediate filament in the upper zones could be specific to hard alpha-keratin whilst the other architecture found in the lower zone could be representative for intermediate filaments in a different environment.

Microdissection of the sequence and structure of intermediate filament chains

A large number of intermediate filament (IF) chains have now been sequenced. From these data, it has been possible to deduce the main elements of the secondary structure, especially those lying within the central rod domain of the molecule. These conclusions, allied to results obtained from crosslinking studies, have shown that at least four unique but related structures are adopted by the class of structures known generically as intermediate filaments: (1) epidermal and reduced trichocyte keratin; (2) oxidized trichocyte keratin; (3) desmin, vimentin, neurofilaments, and related Type III and IV proteins; and (4) lamin molecules. It would be expected that local differences in sequences of the proteins in these four groups would occur, and that this would ultimately relate to assembly. Site-directed mutagenesis and theoretical methods have now made it possible to investigate these ideas further. In particular, new data have been obtained that allow the role played by some individual amino acids or a short stretch of sequence to be determined. Among the observations catalogued here are the key residues involved in intra- and interchain ionic interactions, as well as those involved in stabilizing some modes of molecular aggregation; the structure and role of subdomains in the head and tail domains; the repeat sequences occurring along the length of the chain and their structural significance; trigger motifs in coiled-coil segments; and helix initiation and termination motifs that terminate the rod domain. Much more remains to be done, not least of which is gaining an increased understanding of the many subtle differences that exist between different IF chains at the sequence level.

Macrofibril assembly in trichocyte (hard alpha-) keratins

Early electron microscope studies of developing wool and hair established that trichocyte (hard alpha-) keratin fibers have a composite structure in which filaments, subsequently shown to belong to the class of intermediate filaments (IF), were embedded in a matrix of sulfur-rich proteins. These studies also showed that the IF aggregate in a variety of ways to form what have been termed macrofibrils. Assembly into sheets appears to be an important initial factor in aggregation, and in the present contribution the structural principles governing sheet formation are formulated and specific models for the interaction between neighboring IF in a sheet are proposed, based on existing X-ray diffraction, electron microscope, and crosslinking data. All of the trichocyte keratins so far examined by electron microscopy exhibit similar filament/matrix textures and the mechanism of sheet formation proposed here is likely to have general applicability.

Structural changes in trichocyte keratin intermediate filaments during keratinization

The so-called hard alpha-keratins, such as quill and hair, have a composite structure in which intermediate filaments (IF) are embedded in a sulfur-rich matrix. Recent studies of these trichocyte keratin IF have revealed that substantial changes in the molecular architecture take place when oxidation of the cysteine residues occurs as part of the terminal differentiation/keratinization process. Recent cryoelectron microscope studies suggest that the IF has a tubular structure prior to keratinization, but transmission electron micrographs of thin sections of fully keratinized fibers exhibit a "ring-core" structure. In the present contribution we develop a generic model for the IF in the reduced state based on cross-linking studies and discuss two possibilities for the way in which this structure may be modified during the keratinization process.

Modeling alpha-helical coiled-coil interactions: the axial and azimuthal alignment of 1B segments from vimentin intermediate filaments

Attempts at predicting the relative axial alignments of fibrous protein molecules in filamentous structures have relied upon representing the (multichain) molecular structure by a one-dimensional sequence of amino acids. Potential intermolecular ionic and apolar interactions were counted and determined as a function of the relative axial stagger between the molecules. No attempts were made to consider the azimuthal aspect of the interacting molecules and neither were apolar or ionic energy terms used. Surprisingly, this simple approach proved remarkably informative and yielded accurate predictions of the axial periods present. However, a more comprehensive analysis involving the energetics of aggregation taking due regard for the relative azimuths of the molecules as well as their separation should decrease the noise level in the calculations and reveal other pertinent information. Toward that end, we have modeled the interaction between two alpha-helical coiled-coil segments in intermediate filament molecules (1B segments from human vimentin). The relative axial alignment and polarity of the molecules is already known from detailed crosslinking studies and this provides a criterion against which the success (or otherwise) of the modeling can be judged. The results confirm that an antiparallel alignment of two 1B segments is preferred over any of the parallel options (as observed experimentally). The calculated axial alignment, however, is not identical to that observed from detailed crosslinking studies indicating that other parts of the molecule (probably the head and tail domains as well as other coiled-coil segments) have a crucial role in determining the precise mode of axial aggregation. The results also show that the apolar interactions seem to be significantly less important in the alignment process than the ionic ones. This is consistent with the observation of a well-defined period in the linear disposition of the charged (but not apolar) residues along the length of the outer surface of the vimentin molecule.

A new deformation model of hard alpha-keratin fibers at the nanometer scale: implications for hard alpha-keratin intermediate filament mechanical properties

The mechanical behavior of human hair fibers is determined by the interactions between keratin proteins structured into microfibrils (hard alpha-keratin intermediate filaments), a protein sulfur-rich matrix (intermediate filaments associated proteins), and water molecules. The structure of the microfibril-matrix assembly has already been fully characterized using electron microscopy and small-angle x-ray scattering on unstressed fibers. However, these results give only a static image of this assembly. To observe and characterize the deformation of the microfibrils and of the matrix, we have carried out time-resolved small-angle x-ray microdiffraction experiments on human hair fibers stretched at 45% relative humidity and in water. Three structural parameters were monitored and quantified: the 6.7-nm meridian arc, which is related to an axial separation between groups of molecules along the microfibrils, the microfibril's radius, and the packing distance between microfibrils. Using a surface lattice model of the microfibril, we have described its deformation as a combination of a sliding process and a molecular stretching process. The radial contraction of the matrix is also emphasized, reinforcing the hydrophilic gel nature hypothesis.

A role for the 1A and L1 rod domain segments in head domain organization and function of intermediate filaments: structural analysis of trichocyte keratin

A dynamic model is proposed to explain how the 1A and linker L1 segments of the rod domain in intermediate filament (IF) proteins affect the head domain organization and vice versa. We have shown in oxidized trichocyte IF that the head domain sequences fold back over and interact with the rod domain. This phenomenon may occur widely in reduced IF as well. Its function may be to stabilize the 1A segments into a parallel two-stranded coiled coil or something closely similar. Under differing reversible conditions, such as altered states of IF assembly, or posttranslational modifications, such as phosphorylation etc., the head domains may no longer associate with the 1A segment. This could destabilize segment 1A and cause the two alpha-helical strands to separate. Linker L1 would thus act as a hinge and allow the heads to function over a wide lateral range. This model has been explored using the amino acid sequences of the head (N-terminal) domains of Type I and Type II trichocyte keratin intermediate filament chains. This has allowed several quasi-repeats to be identified. The secondary structure corresponding to these repeats has been predicted and a model has been produced for key elements of the Type II head domain. Extant disulfide cross-link data have been used as structural constraints. A model for the head domain structure predicts that a twisted beta-sheet region may wrap around the 1A segment and this may reversibly stabilize a coiled-coil conformation for 1A. The evidence in favor of the swinging head model for IF is discussed.

Unraveling double stranded alpha-helical coiled coils: an x-ray diffraction study on hard alpha-keratin fibers

Transformations of proteins secondary and tertiary structures are generally studied in globular proteins in solution. In fibrous proteins, such as hard alpha-keratin, that contain long and well-defined double stranded alpha-helical coiled coil domains, such study can be directly done on the native fibrous tissue. In order to assess the structural behavior of the coiled coil domains under an axial mechanical stress, wide angle x-ray scattering and small angle x-ray scattering experiments have been carried out on stretched horse hair fibers at relative humidity around 30%. Our observations of the three major axial spacings as a function of the applied macroscopic strain have shown two rates. Up to 4% macroscopic strain the coiled coils were slightly distorted but retained their overall conformation. Above 4% the proportion of coiled coil domains progressively decreased. The main and new result of our study is the observation of the transition from alpha-helical coiled coils to disordered chains instead of the alpha-helical coiled coil to beta-sheet transition that occurs in wet fibers.

In vitro assembly and structure of trichocyte keratin intermediate filaments: a novel role for stabilization by disulfide bonding

Intermediate filaments (IF) have been recognized as ubiquitous components of the cytoskeletons of eukaryotic cells for 25 yr. Historically, the first IF proteins to be characterized were those from wool in the 1960s, when they were defined as low sulfur keratins derived from "microfibrils." These proteins are now known as the type Ia/type IIa trichocyte keratins that constitute keratin IF of several hardened epithelial cell types. However, to date, of the entire class of >40 IF proteins, the trichocyte keratins remain the only ones for which efficient in vitro assembly remains unavailable. In this paper, we describe the assembly of expressed mouse type Ia and type IIa trichocyte keratins into IF in high yield. In cross-linking experiments, we document that the alignments of molecules within reduced trichocyte IF are the same as in type Ib/IIb cytokeratins. However, when oxidized in vitro, several intermolecular disulfide bonds form and the molecular alignments rearrange into the pattern shown earlier by x-ray diffraction analyses of intact wool. We suggest the realignments occur because the disulfide bonds confer substantially increased stability to trichocyte keratin IF. Our data suggest a novel role for disulfide bond cross linking in stabilization of these IF and the tissues containing them.

Protein chains in hair and epidermal keratin IF: structural features and spatial arrangements

Over the past decade the progress made in characterising the structural hierarchy of both the hard and the epidermal keratin intermediate filaments has exceeded all expectations. The origin of much of this progress can be traced back to the quantity of amino acid sequence data that became available in the early/mid 1980s, and their interpretation in terms of a heterodimeric molecular structure. Subdomains were subsequently identified in both the rod and terminal domains, and now the roles of most of these have been determined in principle, if not yet fully in detail. TEM and STEM, together with very revealing crosslinking analyses have also allowed details to be determined of the mechanism by which molecules assemble into oligomers and oligomers into IF. It remains for the three-dimensional packing of keratin molecules in the IF to be elucidated, but even here progress is being made. A particularly exciting development over the last two or three years has been the establishment of the link between keratinopathies and single point nucleotide mutations in keratin genes. Furthermore, the clustering of mutation sites in regions involved in a key structural mode of molecular aggregation has provided, for the first time, an understanding of keratin diseases at the molecular level.

Hard alpha-keratin IF: a structural model lacking a head-to-tail molecular overlap but having hybrid features characteristic of both epidermal keratin and vimentin IF

In intermediate filaments (IF) both epidermal keratin and vimentin molecules have been shown to have an eight residue head-to-tail overlap between the rod domains of similarly directed molecules. In the case of the epidermal keratins this region has also been shown to have particular structural/functional significance since it represents a hot-spot for mutations in the four keratinopathies characterized to date. While there is good evidence that this head-to-tail overlap is present in IF containing Type III, IV, and V chains, as well as in the epidermal keratin IF (Ib/IIb), there are no data currently available for the hard alpha-keratin IF (Ia/IIa). Using a variety of data derived from X-ray diffraction and crosslinking studies, as well as theoretical modeling, it is now possible to demonstrate that the overlap region is not a feature of hard alpha-keratin IF. Indeed, it is shown that there is a nine residue gap between consecutive parallel molecules in the IF. An explanation for this observation is presented in terms of compensating disulfide bonds that occur both within the IF, and between the IF and the matrix in which the IF are embedded.

Structural features of keratin intermediate filaments

The first step in the assembly of a keratin intermediate filament (KIF) is the formation of a type I/type II heterodimer molecule in which two chains become aligned in parallel and close axial registration to form a flexible segmented alpha-helical coiled-coil rope 46 nm long. The segments of coiled-coil are interspersed by sequences that introduce irregularities of unknown structure. Here we have modeled two of these, the link L2 and the heptad discontinuity located near the middle of segment 2B. In a model for L2, the orientation of the coiled-coil structure is turned through about 180 degrees over the eight residue stretch constituting this link segment. In contrast, the heptad discontinuity in segment 2B would seem to result in only minimal distortion of the coiled-coil rope, contrary to previous expectations. Little is known about how the neighboring molecules are aligned and packed within the assembled KIF. Crosslinking experiments with KIF have determined that two neighboring molecules are aligned anti-parallel and axially in three ways, and predict that similarly-directed molecules could be overlapped by about 1 nm. The two-dimensional surface lattice resulting from these data predicts an axial periodicity of 22.6 nm, which in fact is visible by electron microscopy of shadowed KIF. Interestingly, most of the amino acid substitutions resulting from mutations in the keratin genes found in genodermatoses are clustered in this molecular overlap region. Although we do not yet know how the rows of antiparallel molecules fold in three dimensions to form an intact KIF, certain of the observed crosslinks could also occur between nearest neighbor parallel molecules across a four-molecule strand; that is, KIF may be built from bundles or protofibrils. These insights on molecular structure and molecular packing provide new constraints on models for KIF structure.

Conservation of the structure of keratin intermediate filaments: molecular mechanism by which different keratin molecules integrate into preexisting keratin intermediate filaments during differentiation

During development and differentiation, the intermediate filament component of the cytoskeleton of many cells and tissues is rebuilt by a dynamic exchange process in which one set of protein chains is replaced by another, without recourse to creation of a new network. One major example is the replacement of keratin 5/keratin 14 (K5/K14) keratin intermediate filaments (KIFs) by K1/K10 KIFs during terminal differentiation in the epidermis. The present work was undertaken to explore how this may occur. We have induced lysine-lysine cross-links with disulfosuccinimidyl tartrate in K5/K14 KIFs in order to determine the axial dimensions and relative axial alignments of the K5/K14 molecules. Many of the cross-links induced in subfilamentous oligomers containing one, two, or three molecules were also found in the intact KIF, indicating that the body of data thus generated provides physiologically relevant information on the structural organization in the KIF. A least-squares analysis using as data the positions of lysine residues involved in 23 induced cross-links has allowed the axial alignments of the various coiled-coil segments in the rod domain to be determined. Three modes of antiparallel alignment of two neighboring molecules were found: A11 (staggered by -16.7 nm), A22 (staggered by 28.8 nm), and A12 (almost in register; staggered by only 0.3 nm). Since the axial repeat length is about 1 nm less than the molecular length, the data require a fourth mode of molecule alignment, termed ACN, in which similarly directed molecules are overlapped by the equivalent of about 5-10 residues.(ABSTRACT TRUNCATED AT 250 WORDS)