Holliday junctions in FLP recombination: resolution by step-arrest mutants of FLP protein

Characterization of a conjugative transposon integrase, IntDOT

Sequence analysis revealed that the integrase of the Bacteroides conjugative transposon CTnDOT (IntDOT) might be a member of the tyrosine recombinase family because IntDOT has five of six highly conserved residues found in the catalytic domains of tyrosine recombinases. Yet, IntDOT catalyses a reaction that appears to differ in some respects from well-studied tyrosine recombinases such as that of phage lambda. To assess the importance of the conserved residues, we changed residues in IntDOT that align with conserved residues in tyrosine recombinases. Some substitutions resulted in a complete loss or significant decrease of integration activity in vivo. The ability of the mutant proteins to cleave and ligate CTnDOT attachment site (attDOT) DNA in vitro in general paralleled the in vivo results, but the H345A mutant, which had a wild-type level of integration in vivo, exhibited a slightly lower level of cleavage and ligation in vitro. Our results confirm the hypothesis that IntDOT belongs to the tyrosine recombinase family, but the catalytic core of the protein seems to have somewhat different organization. Previous DNA sequence analyses showed that CTnDOT att sites contain 5 bp non-homologous coupling sequences which were assumed to define the putative staggered sites of cleavage. However, cleavage assays showed that one of the cleavage sites is 2 bp away from the junction of CTnDOT and coupling sequence DNA. The site is in a region of homology that is conserved in CTnDOT att sites.

Viewing single lambda site-specific recombination events from start to finish

The site-specific recombination pathway by which the bacteriophage lambda chromosome is excised from its Escherichia coli host chromosome is a tightly regulated, highly directional, multistep reaction that is executed by a series of multiprotein complexes. Until now, it has been difficult to study the individual steps of such reactions in the context of the entire pathway. Using single-molecule light microscopy, we have examined this process from start to finish. Stable bent-DNA complexes containing integrase and the accessory proteins IHF (integration host factor) and Xis form rapidly on attL and attR recombination partners, and synapsis of partner complexes follows rapidly after their formation. Integrase-mediated DNA cleavage before or immediately after synapsis is required to stabilize the synaptic assemblies. Those complexes that synapsed (approximately 50% of the total) yield recombinant product with a remarkable approximately 100% efficiency. The rate-limiting step of excision occurs after synapsis, but closely precedes or is concomitant with the appearance of a stable Holliday junction. Our kinetic analysis shows that directionality of this recombination reaction is conferred by the irreversibility of multiple reaction steps.

Reversed DNA strand cleavage specificity in initiation of Cre-LoxP recombination induced by the His289Ala active-site substitution

During the first steps of site-specific recombination, Cre protein cleaves and religates a specific homologous pair of LoxP strands to form a Holliday junction (HJ) intermediate. The HJ is resolved into recombination products through exchange of the second homologous strand pair. CreH289A, containing a His to Ala substitution in the conserved R-H-R catalytic motif, has a 150-fold reduced recombination rate and accumulates HJs. However, to produce these HJs, CreH289A exchanges the opposite set of strands compared to wild-type Cre (CreWT). To investigate how CreH289A and CreWT impose strand exchange order, we characterized their reactivities and strand cleavage preferences toward LoxP duplex and HJ substrates containing 8bp spacer substitutions. Remarkably, CreH289A had different and often opposite strand exchange preferences compared to CreWT with nearly all substrates. CreH289N was much less perturbed, implying that overall recombination rate and strand exchange depend more on His289 hydrogen bonding capability than on its acid/base properties. LoxP substitutions immediately 5' (S1 nucleotide) or 3' (S1' nucleotide) of the scissile phosphate had large effects on substrate utilization and strand exchange order. S1' substitutions, designed to alter base-unstacking events concomitant with Cre-induced LoxP bending, caused HJ accumulation and dramatically inverted the cleavage preferences. That pre-formed HJs were resolved via either strand in vitro suggests that inhibition of the "conformational switch" isomerization required to trigger the second strand exchange accounts for the observed HJ accumulation. Rather than reflecting CreWT behavior, CreH289A accumulates HJs of opposite polarity through a combination of its unique cleavage specificity and an HJ isomerization defect. The overall implication is that cleavage specificity is mediated by sequence-dependent DNA deformations that influence the scissile phosphate positioning and reactivity. A role of His289 may be to selectively stabilize the "activated" phosphate conformation in order to promote cleavage.

Electrostatic Interactions and the Folding of the Four-way DNA Junction: Analysis by Selective Methyl Phosphonate Substitution

The structure and dynamics of the four-way (Holliday) junction are strongly dependent on the presence of metal ions. In this study, the importance of phosphate charge in and around the point of strand exchange has been explored by selective replacement with electrically neutral methyl phosphonate groups, guided by crystal structures of the junction in the folded, stacked X conformation. Junction conformation has been analysed by comparative gel electrophoresis and fluorescence resonance energy transfer (FRET). Three of sets of phosphate groups on the exchanging strands have been analysed; those at the point of strand exchange and those to their 3' and 5' sides. The exchanging and 3' phosphate groups form a box of negatively charged groups on the minor groove face of the junction, while the 5' phosphate groups face each other on the major groove side, with their proR oxygen atoms directed at one another. The largest effects are observed on substitution of the exchanging phosphate groups; replacement of both groups leads to the loss of the requirement for addition of metal ions to allow junction folding. When the equivalent phosphate groups on the continuous strands were substituted, a proportion of the junction folded into the alternative conformer so as to bring these phosphate groups onto the exchanging strands. These species did not interconvert, and thus this is likely to result from the alternative diasteromeric forms of the methyl phosphonate group. This shows that some of the conformational effects result from more than purely electrostatic interactions. Smaller but significant effects were observed on substitution of the flanking phosphate groups. All methyl phosphonate substitutions at these positions allowed folding to proceed at a reduced concentration of magnesium ions, with double substitutions more effective than single substitutions. Substitution of 5' phosphates resulted in a greater degree of folding at a given ionic concentration compared to the corresponding 3' phosphate substitutions. These results show that the phosphate groups at the point of strand exchange exert the largest electrostatic effect on junction folding, but a number of phosphate groups in the vicinity of the exchange region contribute to the overall effects.

Cre induces an asymmetric DNA bend in its target loxP site

Cre initiates recombination by preferentially exchanging the bottom strands of the loxP site to form a Holliday intermediate, which is then resolved on the top strands. We previously found that the scissile AT and GC base pairs immediately 5' to the scissile phosphodiester bonds are critical in determining this order of strand exchange. We report here that the scissile base pairs also influence the Cre-induced DNA bends, the position of which correlates with the initial site of strand exchange. The binding of one Cre molecule to a loxP site induces a approximately 35 degrees asymmetric bend adjacent to the scissile GC base pair. The binding of two Cre molecules to a loxP site induces a approximately 55 degrees asymmetric bend near the center of the spacer region with a slight bias toward the scissile A. Lys-86, which contacts the scissile nucleotides, is important for establishing the bend near the scissile GC base pair when one Cre molecule is bound but has little role in positioning the bend when two Cre molecules are bound to a loxP site. We present a model relating the position of the Cre-induced bends to the order of strand exchange in the Cre-catalyzed recombination reaction.

Sequence of the loxP site determines the order of strand exchange by the Cre recombinase

Conservative site-specific recombinases of the integrase family carry out recombination via a Holliday intermediate. The Cre recombinase, a member of the integrase family, was previously shown to initiate recombination by cleaving and exchanging preferentially on the bottom strand of its loxP target sequence. We have confirmed this strand bias for an intermolecular recombination reaction that used wild-type loxP sites and Cre protein. We have examined the sequence determinants for this strand preference by selectively mutating the two asymmetric scissile base-pairs in the lox site (those immediately adjacent to the sites of cleavage by Cre). We found that the initial strand exchange occurs preferentially next to the scissile G residue. Resolution of the Holliday intermediate thus formed takes place preferentially next to the scissile A residue. Lys86, which contacts the scissile nucleotides in the Cre-lox crystal structures, was important for establishing the strand preference in the resolution of the loxP-Holliday intermediate, but not for the initiation of recombination between loxP sites.

Directional resolution of synthetic holliday structures by the Cre recombinase

The Cre recombinase of bacteriophage P1 cleaves its target site, loxP, in a defined order. Recombination is initiated on one pair of strands to form a Holliday intermediate, which is then resolved by cleavage and exchange of the other pair of strands to yield recombinant products. To investigate the influence of the loxP sequence on the directionality of resolution, we constructed synthetic Holliday (chi) structures containing either wild-type or mutant lox sites. We found that Cre preferentially resolved the synthetic wild-type chi structures on a particular pair of strands. The bias in the direction of resolution was dictated by the asymmetric loxP sequence since the resolution bias was abolished with symmetric lox sites. Systematic substitutions of the loxP site revealed that the bases immediately 5' to the scissile phosphodiester bonds were primarily responsible for the directionality of resolution. Interchanging these base pairs was sufficient to reverse the resolution bias. The Cre-lox co-crystal structures show that Lys(86) makes a base-specific contact with guanine immediately 5' to one of the scissile phosphates. Substituting Lys(86) with alanine resulted in a reduction of the resolution bias, indicating that this amino acid is important for establishing the bias in resolution.

Xer site-specific recombination. DNA strand rejoining by recombinase XerC

Xer site-specific recombination functions in the stable maintenance of circular replicons in Escherichia coli. Each of two related recombinase proteins, XerC and XerD, cleaves a specific pair of DNA strands, exchanges them, and rejoins them to the partner DNA molecule during a complete recombination reaction. The rejoining activity of recombinase XerC has been analyzed using isolated covalent XerC-DNA complexes resulting from DNA cleavage reactions upon Holliday junction substrates. These covalent protein-DNA complexes are competent in the rejoining reaction, demonstrating that covalently bound XerC can catalyze strand rejoining in the absence of other proteins. This contrasts with a recombinase-mediated cleavage reaction, which requires the presence of both recombinases, the recombinase mediating catalysis at any given time requiring activation by the partner recombinase. In a recombining nucleoprotein complex, both cleavage and rejoining can occur prior to dissociation of the complex.

Catalytic and binding mutants of the junction-resolving enzyme endonuclease I of bacteriophage t7: role of acidic residues

Endonuclease I is a 149 amino acid protein of bacteriophage T7 that is a Holliday junction-resolving enzyme, i.e. a four-way junction-selective nuclease. We have performed a systematic mutagenesis study of this protein, whereby all acidic amino acids have been individually replaced by other residues, mainly alanine. Out of 21 acidic residues, five (Glu20, Glu35, Glu65, Asp55 and Asp74) are essential. Replacement of these residues by other amino acids leads to a protein that is inactive in the cleavage of DNA junctions, but which nevertheless binds selectively to DNA junctions. The remaining 16 acidic residues can be replaced without loss of activity. The five critical amino acids are located within one section of the primary sequence. It is rather likely that their function is to bind one or more metal ions that coordinate the water molecule that brings about hydrolysis of the phosphodiester bond. We have also constructed a mutant of endonuclease I that lacks nine amino acids (six of which are arginine or lysine) at the C-terminus. Unlike the acidic point mutants, the C-terminal truncation is unable to bind to DNA junctions. It is therefore likely that the basic C-terminus is an important element in binding to the DNA junction.

Structural alterations and conformational dynamics in Holliday junctions induced by binding of a site-specific recombinase

Binding of a cleavage-incompetent mutant of the Flp recombinase induces a roughly square-planar geometry in synthetic immobile Holliday junctions. The branch points, which are rigidly fixed in these junctions in their free forms, tend to be more flexible in their protein-bound forms. Our results (1) suggest a plausible mechanism for the switching of the recombination complex from the Holliday-forming mode to the Holliday-resolving mode, (2) provide a rationale for previous observations that Flp resolves preformed immobile Holliday structures in the parental or in the recombinant mode in a relatively unbiased manner, and (3) accommodate two modes of DNA cleavage by Flp (transhorizontal or transdiagonal) in Holliday substrates.

Selection of novel, specific single-stranded DNA sequences by Flp, a duplex-specific DNA binding protein

Flp is a member of the integrase family of site-specific recombinases. Flp is known to be a double-stranded (ds)DNA binding protein that binds sequence specifically to the 13 bp binding elements in the FRT site (Flprecognitiontarget). We subjected a random pool of oligonucleotides to the in vitro binding site selection method and have unexpectedly recovered a series of single-stranded oligonucleotides to which Flp binds with high affinity. These single-stranded oligonucleotides differ in sequence from the duplex FRT site. The minimal length of the oligonucleotides which is active is 29 nt. This single strand-specific DNA binding activity is located in the same C-terminal 32 kDa domain of Flp in which the site-specific dsDNA binding activity resides. Competition studies suggest that the apparent affinity of Flp for single-stranded oligonucleotide is somewhat less than for a complete duplex FRT site but greater than for a single duplex 13 bp binding element. We have also shown that Cre, another member of the integrase family of site-specific recombinases, also exhibits single-stranded DNA binding similar to that of Flp.

The role of single-stranded DNA in Flp-mediated strand exchange

The Flp recognition target site contains two inverted 13-base pair (bp) Flp binding sequences that surround an 8-bp core region. Flp recombinase has been shown to carry out strand ligation independently of its ability to execute strand cleavage. Using a synthetic activated DNA substrate bearing a 3'-phosphotyrosine group, we have developed an assay to measure strand exchange by Flp proteins. We have shown that wild-type Flp protein was able to catalyze strand exchange using DNA substrates containing 8-bp duplex core sequences. Mutant Flp proteins that are defective in either DNA bending or DNA cleavage were also impaired in their abilities to carry out strand exchange. The inability of these mutant proteins to execute strand exchange could be overcome by providing a DNA substrate containing a single-stranded core sequence. This single-stranded core sequence could be as small as 3 nucleotides. Full activity of mutant Flp proteins in strand exchange was observed when both partner DNAs contained an 8-nucleotide single-stranded core region. Using suicide substrates, we showed that single-stranded DNA is also important for strand exchange reactions where Flp-mediated strand cleavage is required. These results suggest that the ability of Flp to induce DNA bending and strand cleavage may be crucial for strand exchange. We propose that both DNA bending and strand cleavage may be required to separate the strands of the core region and that single-stranded DNA in the core region might be an intermediate in Flp-mediated DNA recombination.

Similarities and differences among 105 members of the Int family of site-specific recombinases

Alignments of 105 site-specific recombinases belonging to the Int family of proteins identified extended areas of similarity and three types of structural differences. In addition to the previously recognized conservation of the tetrad R-H-R-Y, located in boxes I and II, several newly identified sequence patches include charged amino acids that are highly conserved and a specific pattern of buried residues contributing to the overall protein fold. With some notable exceptions, unconserved regions correspond to loops in the crystal structures of the catalytic domains of lambda Int (Int c170) and HP1 Int (HPC) and of the recombinases XerD and Cre. Two structured regions also harbor some pronounced differences. The first comprises beta-sheets 4 and 5, alpha-helix D and the adjacent loop connecting it to alpha-helix E: two Ints of phages infecting thermophilic bacteria are missing this region altogether; the crystal structures of HPC, XerD and Cre reveal a lack of beta-sheets 4 and 5; Cre displays two additional beta-sheets following alpha-helix D; five recombinases carry large insertions. The second involves the catalytic tyrosine and is seen in a comparison of the four crystal structures. The yeast recombinases can theoretically be fitted to the Int fold, but the overall differences, involving changes in spacing as well as in motif structure, are more substantial than seen in most other proteins. The phenotypes of mutations compiled from several proteins are correlated with the available structural information and structure-function relationships are discussed. In addition, a few prokaryotic and eukaryotic enzymes with partial homology with the Int family of recombinases may be distantly related, either through divergent or convergent evolution. These include a restriction enzyme and a subgroup of eukaryotic RNA helicases (D-E-A-D proteins).

A histone octamer blocks branch migration of a Holliday junction

The Holliday junction is a key intermediate in genetic recombination. Here, we examine the effect of a nucleosome core on movement of the Holliday junction in vitro by spontaneous branch migration. Histone octamers consisting of H2A, H2B, H3, and H4 are reconstituted onto DNA duplexes containing an artificial nucleosome-positioning sequence consisting of a tandem array of an alternating AT-GC sequence motif. Characterization of the reconstituted branch migration substrates by micrococcal nuclease mapping and exonuclease III and hydroxyl radical footprinting reveal that 70% of the reconstituted octamers are positioned near the center of the substrate and the remaining 30% are located at the distal end, although in both cases some translational degeneracy is observed. Branch migration assays with the octamer-containing substrates reveal that the Holliday junction cannot migrate spontaneously through DNA organized into a nucleosomal core unless DNA-histone interactions are completely disrupted. Similar results are obtained with branch migration substrates containing an octamer positioned on a naturally occurring sequence derived from the yeast GLN3 locus. Digestion of Holliday junctions with T7 endonuclease I establishes that the junction is not trapped by the octamer but can branch migrate in regions free of histone octamers. Our findings suggest that migration of Holliday junctions during recombination and the recombinational repair of DNA damage requires proteins not only to accelerate the intrinsic rate of branch migration but also to facilitate the passage of the Holliday junction through a nucleosome.

Recognition and manipulation of branched DNA structure by junction-resolving enzymes

The junction-resolving enzymes are a class of nucleases that introduce paired cleavages into four-way DNA junctions. They are important in DNA recombination and repair, and are found throughout nature, from eubacteria and their bacteriophages through to higher eukaryotes and their viruses. These enzymes exhibit structure-selective binding to DNA junctions; although cleavage may be more or less sequence-dependent, binding affinity is purely related to the branched structure of the DNA. Binding and cleavage events can be separated for a number of the enzymes by mutagenesis, and mutant proteins that are defective in cleavage while retaining normal junction-selective binding have been isolated. Critical acidic residues have been identified in several resolving enzymes, suggesting a role in the coordination of metal ions that probably deliver the hydrolytic water molecule. The resolving enzymes all bind to junctions in dimeric form, and the subunits introduce independent cleavages within the lifetime of the enzyme-junction complex to ensure resolution of the four-way junction. In addition to recognising the structure of the junction, recent data from four different junction-resolving enzymes indicate that they also manipulate the global structure. In some cases this results in severe distortion of the folded structure of the junction. Understanding the recognition and manipulation of DNA structure by these enzymes is a fascinating challenge in molecular recognition.

Near-simultaneous DNA cleavage by the subunits of the junction-resolving enzyme T4 endonuclease VII

In common with a number of other DNA junction-resolving enzymes, endonuclease VII of bacteriophage T4 binds to a four-way DNA junction as a dimer, and cleaves two strands of the junction. We have used a supercoil-stabilized cruciform substrate to probe the simultaneity of cleavage at the two sites. Active endonuclease VII converts the supercoiled circular DNA directly into linear product, indicating that the two cleavage reactions must occur within the lifetime of the protein-junction complex. By contrast, a heterodimer of active enzyme and an inactive mutant endonuclease VII leads to the formation of nicked circular product, showing that the subunits operate fully independently.

Topological analysis of the role of homology in Flp-mediated recombination

Recombination by the Flp recombinase of Saccharomyces cerevisiae is known to be inhibited by heterology of the overlap regions of the two recombining DNA targets (FRT sites). We have used topological analysis to show that Flp can promote two rounds of intramolecular recombination between heterologous FRT sites contained within the same supercoiled plasmid. The products are in parental nonrecombinant configuration. Thus, heterology may appear to "block" recombination by rendering the heteroduplex recombinant products unstable, thus favoring a second round of recombination to homoduplex (but parental) products. Hence, homology in the core region is not a requirement for the recombination reaction by Flp but for the formation of recombinant products.

The resolving enzyme CCE1 of yeast opens the structure of the four-way DNA junction

Junction-resolving enzymes exhibit structure-selective binding to DNA, but may also manipulate the DNA structure. CCE1 is a junction-resolving enzyme found in the yeast mitochondrion. To facilitate the analysis of the CCE1-junction interaction, we have exploited the sequence dependence of the cleavage reaction to devise a junction that is refractory to cleavage by this enzyme, even in the presence of magnesium ions. On binding to four-way DNA junctions, pure recombinant CCE1 opens the global structure into a 4-fold symmetrical configuration of arms with an open, chemically reactive centre. The structure of the CCE1-junction complex is independent of the sequence of the junction, and of the presence or absence of magnesium or other ions. This and other functional properties of CCE1 are strikingly similar to those of RuvC resolving enzyme of Escherichia coli.

T4 endonuclease VII. Importance of a histidine-aspartate cluster within the zinc-binding domain

The DNA junction-resolving enzyme endonuclease VII of bacteriophage T4 contains a zinc-binding region toward the N-terminal end of the primary sequence. In the center of this 39-amino acid section (between residues 38 and 44) lies the sequence HLDHDHE, termed the His-acid cluster. Closely related sequences are found in three other proteins that have similar zinc-binding motifs. We have analyzed the function of these residues by a site-directed mutagenesis approach, modifying single amino acids and studying the properties of the resulting N-terminal protein A fusions. No sequence changes within the His-acid cluster led to a change in zinc content of the protein, indicating that these residues are not involved in the coordination of zinc. We found that the N-terminal aspartate residue (Asp-40) and the two histidine residues (His-41 and His-43) within the cluster are essential for junction-cleavage activity of the proteins. However, all sequence variations within this region generate proteins that retain their ability to bind to four-way DNA junctions (with minor changes in binding affinity in some cases) and to distort their global structure in the same manner as active enzymes. We conclude that the process of cleavage can be uncoupled from those of binding to and distortion of the junction. It is probable that some amino acid side chains of the His-acid cluster participate in the phosphodiester cleavage mechanism of endonuclease VII. The essential aspartate residue might be required for coordination of catalytic metal ions.

Cleavage-dependent ligation by the FLP recombinase. Characterization of a mutant FLP protein with an alteration in a catalytic amino acid

The FLP recombinase of the 2 microM plasmid of Saccharomyces cerevisiae belongs to the integrase family of recombinases whose members have in common four absolutely conserved residues (Arg-191, His-305, Arg-308, and Tyr-343). We have studied the mutant protein FLP R308K in which the arginine residue at position 308 has been replaced by lysine. Although FLP R308K was previously reported to be defective in ligation of certain substrates (Pan, G., Luetke, K., and Sadowski, P.D., Mol. Cell. Biol. 13, 3167-3175, 1993b), we show in this work that the protein is able to ligate those substrates that it can cleave (cleavage-dependent ligation activity). FLP R308K is defective in in vitro recombination and in strand exchange. It is able to carry out strand exchange at one of the two cleavage sites of the FLP recognition target site (FRT site), but is defective in strand exchange at the other cleavage site. These results are consistent with a model in which wild-type FLP initiates recombination only at one of the two cleavage sites. FLP R308K may be defective in the initiation of recombination.

Chemical probe and missing nucleoside analysis of Flp recombinase bound to the recombination target sequence

The Flp protein catalyzes a site-specific recombination reaction between two 47 bp DNA sites without the assistance of any other protein or cofactor. The Flp recognition target (FRT) site consists of three nearly identical sequences, two of which are separated by an 8 bp spacer sequence. In order to gain insight into this remarkable protein-DNA interaction we used a variety of chemical probe methods and the missing nucleoside experiment to examine Flp binding. Hydroxyl radical footprints of Flp bound to a recombinationally-competent site fall on opposite faces of canonical B-DNA. The 8 bp spacer region between the two Flp binding sites becomes reactive towards 5-phenyl-1,10-phenanthroline.copper upon Flp binding, indicating that once bound by Flp, this segment of DNA is not in the B-form. Missing nucleoside analysis reveals that within each binding site the presence of two nucleosides on the top strand and four on the bottom, are required for formation of a fully-occupied FRT site. In contrast, loss of any nucleoside in the three binding sites in the FRT interferes with formation of lower-occupancy complexes. DNA molecules with gaps in the 8 bp spacer region are over-represented in complexes with either two or three binding sites occupied by Flp, evidence that DNA flexibility facilitates the cooperative interaction of Flp protomers bound to a recombinationally-active site.

Junction mobility and resolution of Holliday structures by Flp site-specific recombinase. Testing partner compatibility during recombination

Absolute homology between partner substrates within the strand exchange region (spacer) is an essential requirement for recombination mediated by the yeast site-specific recombinase Flp. Recent experiments suggest that 3-base pair homology adjacent to the points of exchange at each end of the spacer is utilized in a base complementarity-dependent strand joining reaction. Homology of the central 2 base pairs of the spacer is also critical, but how homology is tested at these two positions is unknown. We have addressed the role of homology-dependent branch migration in Flp recombination by assaying strand cleavage and resolution in a set of synthetic Holliday junctions in which the branch point is freely or partially mobile through the spacer, or is immobilized at each position within the spacer or immediately flanking it. A strong bias in the direction of Holliday resolution is observed only when the branch point is located just outside the spacer (at the junction of the Flp binding element and the spacer). A significantly smaller bias is noticed when the branch point is frozen immediately adjacent to this position within the spacer. Resolution in these cases is most often mediated by exchange of the scissile phosphodiesters at the branch point or proximal to it, and rarely by exchange of the scissile phosphodiesters distal to it. In light of these and previous results, we discuss possible checkpoints for testing partner compatibility during Flp recombination.

Homology requirements for ligation and strand exchange by the FLP recombinase

The FLP recombinase of the 2-microns plasmid of Saccharomyces cerevisiae belongs to the integrase family whose members form a covalent bond between a conserved tyrosine of the recombinase and the 3'-phosphoryl group at the site of cleavage. Ligation takes place when the 5'-OH generated during the cleavage step attacks the phosphotyrosine bond and reforms a phosphodiester bond. When the incoming 5'-OH is from the partner duplex, strand exchange occurs. The FLP recognition target (FRT) contains two inverted 13-base pair (bp) FLP binding sequences that surround an 8-bp core region. It has been shown that heterology in the core regions of the recombinase FLP recognition target sites can dramatically impair recombination. Therefore, it was of interest to study the homology requirements of the core sequence for FLP-mediated ligation. Using nicked duplex substrates containing mismatches in the core sequence, we have demonstrated that the FLP ligation reaction can tolerate mismatches at all positions in the 8-bp core except the position immediately adjacent to the cleavage site. Using half-FRT substrates that contain a single-stranded core sequence, we showed that 4 base pairs adjacent to the cleavage site in the core are required for FLP to execute ligation with a single-stranded oligonucleotide. FLP is also able to ligate the protruding single strand on a half-FRT site to the opposite strand to form a hairpin. We have studied the effect of the base composition of the protruding 8-nucleotide single strand upon the efficiency of hairpin ligation. These studies revealed the importance of intrastrand complementarity in the formation of hairpin by FLP. Hence we conclude that the homology in the position adjacent to the cleavage site is most important, and the degree of the homology required is dependent on the nature of the ligation assay.

Structure of the four-way DNA junction and its interaction with proteins

The four-way DNA junction is an important intermediate in recombination processes; it is, the substrate for different enzyme activities. In solution, the junction adopts a right-handed, antiparallel-stacked X-structure formed by the pairwise coaxial-stacking of helical arms. The stereochemistry is determined by the juxtaposition of grooves and backbones, which is optimal when the smaller included angle is 60 degrees. The antiparallel structure has two distinct sides with major and minor groove-characteristics, respectively. The folding process requires the binding of metal cations, in the absence of which, the junction remains extended without helix-helix stacking. The geometry of the junction can be perturbed by the presence of certain base-base mispairs or phosphodiester discontinuities located at the point of strand exchange. The four-way DNA junction is selectively cleaved by a number of resolving enzymes. In a number of cases, these appear to recognize the minor groove face of the junction and are functionally divisible into activities that recognize and bind the junction, and a catalytic activity. Some possible mechanisms for the recognition of branched DNA structure are discussed.

The solution structure of the four-way DNA junction at low-salt conditions: a fluorescence resonance energy transfer analysis

The four-way DNA (Holliday) junction is an important postulated intermediate in the process of genetic recombination. Earlier studies have suggested that the junction exists in two alternative conformations, depending upon the salt concentration present. At high salt concentrations the junction folds into a stacked X structure, while at low salt concentrations the data indicate an extended unstacked conformation. The stereochemical conformation of the four-way DNA junction at low salt (low alkali ion concentration and no alkaline earth ions) was established by comparing the efficiency of fluorescence resonance energy transfer (FRET) between donor and acceptor molecules attached pairwise in three permutations to the 5' termini of the duplex arms. A new variation of FRET was implemented based upon a systematic variation of the fraction of donor labeled single strands. The FRET results indicate that the structure of the four-way DNA junction at low salt exists as an unstacked, extended, square arrangement of the four duplex arms. The donor titration measurements made in the presence of magnesium ions clearly show the folding of the junction into the X stacked structure. In addition, the FRET efficiency can be measured. The fluorescence anisotropy of the acceptor in the presence of Mg2+ during donor titrations was also measured; the FRET efficiency can be calculated from the anisotropy data and the results are consistent with the folded, stacked X structure.

Structures of bulged three-way DNA junctions

We have studied a series of three-way DNA junctions containing unpaired bases on one strand at the branch-point of the junctions. The global conformation of the arms of the junctions has been analysed by means of polyacrylamide gel electrophoresis, as a function of conditions. We find that in the absence of added metal ions, all the results for all the junctions can be accounted for by extended structures, with the largest angle being that between the arms defined by the strand containing the extra bases. Upon addition of magnesium (II) or hexamine cobalt (III) ions, the electrophoretic patterns change markedly, indicative of ion-dependent folding transitions for some of the junctions. For the junction lacking the unpaired bases, the three inter-arm angles appear to be quite similar, suggesting an extended structure. However, the addition of unpaired bases permits the three-way junction to adopt a significantly different structure, in which one angle becomes smaller than the other two. These species also exhibit marked protection against osmium addition to thymine bases at the point of strand exchange. These results are consistent with a model in which two of the helical arms undergo coaxial stacking in the presence of magnesium ions, with the third arm defining an angle that depends upon the number of unpaired bases.

Mechanism of cleavage and ligation by FLP recombinase: classification of mutations in FLP protein by in vitro complementation analysis

The FLP recombinase of the 2 microns plasmid of Saccharomyces cerevisiae is a member of the integrase family of site-specific recombinases. Recombination catalyzed by members of this family proceeds via the ordered cleavage and religation of four strands of DNA. Although the amino acid sequences of integrase family members are quite different, each recombinase maintains an absolutely conserved tetrad of amino acids (R-191, H-305, R-308, Y-343; numbers are those of the FLP protein). This tetrad is presumed to reflect a common chemical mechanism for cleavage and ligation that has evolved among all family members. The tyrosine is the nucleophile that causes phosphodiester bond cleavage and covalently attaches to the 3'-PO4 terminus, whereas the other three residues have been implicated in ligation of strands. It has recently been shown that cleavage by FLP takes place in trans; that is, a FLP molecule binds adjacent to the site of cleavage but receives the nucleophilic tyrosine from a molecule of FLP that is bound to another FLP-binding element (J.-W. Chen, J. Lee, and M. Jayaram, Cell 69:647-658, 1992). These studies led us to examine whether the ligation step of the FLP reaction is performed by the FLP molecule bound adjacent to the cleavage site (ligation in cis). We have found that FLP promotes ligation in cis. Furthermore, using in vitro complementation analysis, we have classified several mutant FLP proteins into one of two groups: those proteins that are cleavage competent but ligation deficient (group I) and those that are ligation competent but cleavage defective (group II). This observation suggests that the active site of FLP is composed of several amino acid residues from each of two FLP molecules.

Mechanism of cleavage and ligation by FLP recombinase: classification of mutations in FLP protein by in vitro complementation analysis

The FLP recombinase of the 2 microns plasmid of Saccharomyces cerevisiae is a member of the integrase family of site-specific recombinases. Recombination catalyzed by members of this family proceeds via the ordered cleavage and religation of four strands of DNA. Although the amino acid sequences of integrase family members are quite different, each recombinase maintains an absolutely conserved tetrad of amino acids (R-191, H-305, R-308, Y-343; numbers are those of the FLP protein). This tetrad is presumed to reflect a common chemical mechanism for cleavage and ligation that has evolved among all family members. The tyrosine is the nucleophile that causes phosphodiester bond cleavage and covalently attaches to the 3'-PO4 terminus, whereas the other three residues have been implicated in ligation of strands. It has recently been shown that cleavage by FLP takes place in trans; that is, a FLP molecule binds adjacent to the site of cleavage but receives the nucleophilic tyrosine from a molecule of FLP that is bound to another FLP-binding element (J.-W. Chen, J. Lee, and M. Jayaram, Cell 69:647-658, 1992). These studies led us to examine whether the ligation step of the FLP reaction is performed by the FLP molecule bound adjacent to the cleavage site (ligation in cis). We have found that FLP promotes ligation in cis. Furthermore, using in vitro complementation analysis, we have classified several mutant FLP proteins into one of two groups: those proteins that are cleavage competent but ligation deficient (group I) and those that are ligation competent but cleavage defective (group II). This observation suggests that the active site of FLP is composed of several amino acid residues from each of two FLP molecules.

The structure of branched DNA species

Branched DNA molecules provide a challenging set of structural problems. Operationally we define branched DNA species as molecules in which double helical segments are interrupted by abrupt discontinuities, and we draw together a number of different kinds of structure in the class, including helical junctions of different orders, and base bulges (Fig. 1).

Synapsis, strand scission, and strand exchange induced by the FLP recombinase: analysis with half-FRT sites

We have used a previously described cross-linking assay and half-FRT site substrates to examine the requirements for synapsis, strand exchange, and strand scission. The cross-linking assay showed that the minimum functional FRT site needed for synapsis contains two inverted FLP-binding elements surrounding an 8-bp core. This indicates that four FLP molecules interact with four binding elements in a synaptic complex. The analysis using half-sites showed that the enzyme can catalyze efficient strand exchange between a half-site and the intact FRT site. The reaction occurred only if the half-site had at least 2 bp but no more than 4 bp of the adjoining core sequence. The exchange occurred exclusively at the regions of limited core homology between the respective half-site and the FRT site. The absence of strand exchange between an intact site and a half-site bearing regions of core nonhomology indicates that 1 bp of homology is not sufficient for the formation of stable recombinant structures. Qian et al. (X.-H. Qian, R. B. Inman, and M. M. Cox, J. Biol. Chem. 265:21779-21788, 1990) have recently shown that the FLP protein can catalyze the formation of dimeric, trimeric, and tetrameric complexes with half-FRT sites. We show that only half-sites that contained at least 2 bp of adjacent core could form stable dimer products and be cleaved by the enzyme. Stable dimers were formed between a noncleavable half-site and a cleavable half-site, suggesting that only a single cleavage event is needed for the formation of the dimer.

Synapsis, strand scission, and strand exchange induced by the FLP recombinase: analysis with half-FRT sites

We have used a previously described cross-linking assay and half-FRT site substrates to examine the requirements for synapsis, strand exchange, and strand scission. The cross-linking assay showed that the minimum functional FRT site needed for synapsis contains two inverted FLP-binding elements surrounding an 8-bp core. This indicates that four FLP molecules interact with four binding elements in a synaptic complex. The analysis using half-sites showed that the enzyme can catalyze efficient strand exchange between a half-site and the intact FRT site. The reaction occurred only if the half-site had at least 2 bp but no more than 4 bp of the adjoining core sequence. The exchange occurred exclusively at the regions of limited core homology between the respective half-site and the FRT site. The absence of strand exchange between an intact site and a half-site bearing regions of core nonhomology indicates that 1 bp of homology is not sufficient for the formation of stable recombinant structures. Qian et al. (X.-H. Qian, R. B. Inman, and M. M. Cox, J. Biol. Chem. 265:21779-21788, 1990) have recently shown that the FLP protein can catalyze the formation of dimeric, trimeric, and tetrameric complexes with half-FRT sites. We show that only half-sites that contained at least 2 bp of adjacent core could form stable dimer products and be cleaved by the enzyme. Stable dimers were formed between a noncleavable half-site and a cleavable half-site, suggesting that only a single cleavage event is needed for the formation of the dimer.

Domain of a yeast site-specific recombinase (Flp) that recognizes its target site

Binding of a partial proteolytic digest by V8 enzyme of the yeast site-specific recombinase Flp to its target site gives rise to DNA-protein complexes that are smaller than those produced by the full-sized protein. The smallest of these complexes (occupancy of one peptide monomer per site) contains either one of two polypeptides (32 and 28 kDa) of the V8 digestion mixture. The amino termini of both polypeptides map to Ser-129 of Flp, corresponding to V8 cleavage at Glu-128. The relative mobilities of the complexes formed by the V8 peptides indicate that they lack the sharp substrate bend that is characteristic of Flp-derived complexes. A hybrid protein consisting of the amino-terminal one-third of the R recombinase (from Zygosaccharomyces rouxii) and the carboxyl-terminal two-thirds of Flp recognizes the Flp target site.

Cleavage of a four-way DNA junction by a restriction enzyme spanning the point of strand exchange

The four-way DNA junction is believed to fold in the presence of metal ions into an X-shaped structure, in which there is pairwise coaxial stacking of helical arms. A restriction enzyme MboII has been used to probe this structure. A junction was constructed containing a recognition site for MboII in one helical arm, positioned such that stacking of arms would result in cleavage in a neighbouring arm. Strong cleavage was observed, at the sites expected on the basis of coaxial stacking. An additional cleavage was seen corresponding to the formation of an alternative stacking isomer, suggesting that the two isomeric forms are in dynamic equilibrium in solution.

Molecular cloning of a gene encoding an ARS binding factor from the yeast Saccharomyces cerevisiae

We report the isolation of the gene for origin binding factor 1 (OBF1) from the yeast Saccharomyces cerevisiae by screening a yeast genomic DNA library in lambda gt11 with an ARS-specific oligonucleotide probe. One recombinant encoded a fusion protein of approximately 180 kDa that bound ARS-specific oligonucleotide probes in vitro. The restriction map of this gene was determined after isolation of the complete gene by screening a yeast genomic DNA library in YEp24. Characterization of the gene for OBF1 by pulsed-field gel electrophoresis and Northern and Southern blot analyses demonstrated that (i) the gene is located in chromosome IV, (ii) the gene is a single-copy gene, (iii) the mRNA is approximately 3.8 kilobases, which could code for an approximately 130-kDa polypeptide, consistent with the reported size of OBF1. An antibody, affinity-purified using the lysogen-encoded fusion protein, specifically detected an approximately 130-kDa polypeptide in yeast extract. The isolation of the gene for OBF1 should allow further analysis of the mechanism of action of this protein in vitro and in vivo.

The tertiary structure of the four-way DNA junction affords protection against DNase I cleavage

The accessibility of phosphodiester bonds in the DNA of four-way helical junctions has been probed with the nuclease DNase I. Regions of protection were observed on all four strands of the junctions, that tended to be longer on the strands that are exchanged between the coaxially stacked pairs of helices. The protected regions on the continuous strands of the stacked helices were not located exactly at the junction, but were displaced towards the 3' side of the strand. This is the region of backbone that becomes located in the major groove of the opposed helix in the non-crossed, right-handed structure for the junction, and might therefore be predicted to be protected against cleavage by an enzyme. However, the major grooves of the structure remain accessible to the much smaller probe dimethyl sulphate.

The stereochemistry of a four-way DNA junction: a theoretical study

The stereochemical conformation of the four-way helical junction in DNA (the Holliday junction; the postulated central intermediate of genetic recombination) has been analysed, using molecular mechanical computer modelling. A version of the AMBER program package was employed, that had been modified to include the influence of counterions and a global optimisation procedure. Starting from an extended planar structure, the conformation was varied in order to minimise the energy, and we discuss three structures obtained by this procedure. One structure is closely related to a square-planar cross, in which there is no stacking interaction between the four double helical stems. This structure is probably closely similar to that observed experimentally in the absence of cations. The remaining two structures are based on related, yet distinct, conformations, in which there is pairwise coaxial stacking of neighbouring stems. In these structures, the four DNA stems adopt the form of two quasi-continuous helices, in which base stacking is very similar to that found in standard B-DNA geometry. The two stacked helices so formed are not aligned parallel to each other, but subtend an angle of approximately 60 degrees. The strands that exchange between one stacked helix and the other are disposed about the smaller angle of the cross (i.e. 60 degrees rather than 120 degrees), generating an approximately antiparallel alignment of DNA sequences. This structure is precisely the stacked X-structure proposed on the basis of experimental data. The calculations indicate distortions from standard B-DNA conformation that are required to adopt the stacked X-structure; a widening of the minor groove at the junction, and reorientation of the central phosphate groups of the exchanging strands. An important feature of the stacked X-structure is that it presents two structurally distinct sides. These may be recognised differently by enzymes, providing a rationalisation for the points of cleavage by Holliday resolvases.

Characterization of Holliday structures in FLP protein-promoted site-specific recombination

Holliday structures are formed in the course of FLP protein-promoted site-specific recombination. Here, we demonstrate that Holliday structures are formed in reactions involving wild-type substrates and that they are kinetically competent with respect to the overall reaction rate. Together with a previous demonstration of chemical competence (L. Meyer-Leon, L.-C. Huang, S. W. Umlauf, M. M. Cox, and R. B. Inman, Mol. Cell. Biol. 8:3784-3796, 1988), Holliday structures therefore meet all criteria necessary to establish that they are obligate reaction intermediates in FLP-mediated site-specific recombination. In addition, kinetic evidence suggests that two distinct forms of the Holliday intermediate are present in the reaction pathway, interconverted in an isomerization process that is rate limiting at 0 degree C.

Characterization of Holliday structures in FLP protein-promoted site-specific recombination

Holliday structures are formed in the course of FLP protein-promoted site-specific recombination. Here, we demonstrate that Holliday structures are formed in reactions involving wild-type substrates and that they are kinetically competent with respect to the overall reaction rate. Together with a previous demonstration of chemical competence (L. Meyer-Leon, L.-C. Huang, S. W. Umlauf, M. M. Cox, and R. B. Inman, Mol. Cell. Biol. 8:3784-3796, 1988), Holliday structures therefore meet all criteria necessary to establish that they are obligate reaction intermediates in FLP-mediated site-specific recombination. In addition, kinetic evidence suggests that two distinct forms of the Holliday intermediate are present in the reaction pathway, interconverted in an isomerization process that is rate limiting at 0 degree C.

Fluorescence energy transfer shows that the four-way DNA junction is a right-handed cross of antiparallel molecules

The four-way junction between DNA helices is the central intermediate in recombination, and the manner of its interaction with resolvase enzymes can determine the genetic outcome of the process. A knowledge of its structure is a prerequisite to understanding the interaction with proteins, and there has been recent progress. Here we use fluorescence energy transfer to determine the relative distances between the ends of a small DNA junction, and hence the path of the strands. Our results are consistent with the geometry of an 'X'. The interconnected helices are juxtaposed so that the continuous strands of each helix generate an antiparallel alignment, and the two interchanged strands do not cross at the centre. The acute angle of the X structure is defined by a right-handed rotation of the helical axes about the axis perpendicular to the X plane, as viewed from the centre of the X.