Internal cell manipulation using infrared laser traps

Observation of magnet-induced star-like radiation of a plasma created from cancer cells in a laser trap

We present a new phenomenon resulting from the interaction of magnetic beads with cancer cells in a laser trap formed on a slide containing a depression 16.5 mm in diameter and 0.78 mm of maximum depth. This phenomenon includes the apparent formation and expansion of a dark bubble that attracts and incinerates surrounding matter when it explodes, which leads to a plasma emitting intense radiation that has the appearance of a star on a microscopic scale. We have observed the star-like phenomenon for more than 4 years, and the intensity depends on the laser's power. Measuring the laser power of the dark bubble shows the entrapment of electromagnetic energy as it expands.

Formation of Two-Dimensional Magnetically Responsive Clusters Using Hematite Particles Self-Assembled via Particle-Induced Heating at an Interface

Hematite particles, which exhibit a high magnetic moment, are used to apply large forces on physical and biological systems under magnetic fields to investigate various phenomena, such as those of rheology and micromanipulation. However, the magnetic confinement of these particles requires complicated field configurations. On the other hand, laser-assisted optical confinement of single hematite particles results in thermophoresis and subsequent ejection of the particle from the laser spot. Herein, we explore an alternative strategy to induce the self-assembly of hematite. In this strategy, with indirect influence from an optically confined and heated upconverting particle (UCP) at an air-water interface, there is the generation of convection currents that facilitate assembly. We also show that the assembly remains at the interface even after removal of the laser light. The hematite particle assemblies can then be moved using magnetic fields and employed to perform interfacial rheology.

Optical tweezer platform for the characterization of pH-triggered colloidal transformations in the oleic acid/water system

HYPOTHESIS

Soft colloidal particles that respond to their environment have innovative potential for many fields ranging from food and health to biotechnology and oil recovery. The in situ characterisation of colloidal transformations that triggers the functional response remain a challenge.

EXPERIMENTS

This study demonstrates the combination of an optical micromanipulation platform, polarized optical video microscopy and microfluidics in a comprehensive approach for the analysis of pH-driven structural transformations in emulsions. The new platform, together with synchrotron small angle X-ray scattering, was then applied to research the food-relevant, pH-responsive, oleic acid in water system.

FINDINGS

The experiments demonstrate structural transformations in individual oleic acid particles from micron-sized onion-type multilamellar oleic acid vesicles at pH 8.6, to nanostructured emulsions at pH < 8.0, and eventually oil droplets at pH < 6.5. The smooth particle-water interface of the onion-type vesicles at pH 8.6 was transformed into a rough particle surface at pH below 7.5. The pH-triggered changes of the interfacial tension at the droplet-water interface together with mass transport owing to structural transformations induced a self-propelled motion of the particle. The results of this study contribute to the fundamental understanding of the structure-property relationship in pH-responsive emulsions for nutrient and drug delivery applications.

Biophysical Approaches for Applying and Measuring Biological Forces

Over the past decades, increasing evidence has indicated that mechanical loads can regulate the morphogenesis, proliferation, migration, and apoptosis of living cells. Investigations of how cells sense mechanical stimuli or the mechanotransduction mechanism is an active field of biomaterials and biophysics. Gaining a further understanding of mechanical regulation and depicting the mechanotransduction network inside cells require advanced experimental techniques and new theories. In this review, the fundamental principles of various experimental approaches that have been developed to characterize various types and magnitudes of forces experienced at the cellular and subcellular levels are summarized. The broad applications of these techniques are introduced with an emphasis on the difficulties in implementing these techniques in special biological systems. The advantages and disadvantages of each technique are discussed, which can guide readers to choose the most suitable technique for their questions. A perspective on future directions in this field is also provided. It is anticipated that technical advancement can be a driving force for the development of mechanobiology.

Visualization of Optical Vortex Forces Acting on Au Nanoparticles Transported in Nanofluidic Channels

The optical manipulation of nanoscale objects via structured light has attracted significant attention for its various applications, as well as for its fundamental physics. In such cases, the detailed behavior of nano-objects driven by optical forces must be precisely predicted and controlled, despite the thermal fluctuation of small particles in liquids. In this study, the optical forces of an optical vortex acting on gold nanoparticles (Au NPs) are visualized using dark-field microscopic observations in a nanofluidic channel with strictly suppressed forced convection. Manipulating Au NPs with an optical vortex allows the evaluation of the three optical force components, namely, gradient, scattering, and absorption forces, from the in-plane trajectory. We develop a Langevin dynamics simulation model coupled with Rayleigh scattering theory and compare the theoretical results with the experimental ones. Experimental results using Au NPs with diameters of 80-150 nm indicate that our experimental method can determine the radial trapping stiffness and tangential force with accuracies on the order of 0.1 fN/nm and 1 fN, respectively. Our experimental method will contribute to broadening not only applications of the optical-vortex manipulation of nano-objects, but also investigations of optical properties on unknown nanoscale materials via optical force analyses.

Optical manipulation: advances for biophotonics in the 21st century

SIGNIFICANCE

Optical trapping is a technique capable of applying minute forces that has been applied to studies spanning single molecules up to microorganisms.

AIM

The goal of this perspective is to highlight some of the main advances in the last decade in this field that are pertinent for a biomedical audience.

APPROACH

First, the direct determination of forces in optical tweezers and the combination of optical and acoustic traps, which allows studies across different length scales, are discussed. Then, a review of the progress made in the direct trapping of both single-molecules, and even single-viruses, and single cells with optical forces is outlined. Lastly, future directions for this methodology in biophotonics are discussed.

RESULTS

In the 21st century, optical manipulation has expanded its unique capabilities, enabling not only a more detailed study of single molecules and single cells but also of more complex living systems, giving us further insights into important biological activities.

CONCLUSIONS

Optical forces have played a large role in the biomedical landscape leading to exceptional new biological breakthroughs. The continuous advances in the world of optical trapping will certainly lead to further exploitation, including exciting in-vivo experiments.

Controlling optical trapping of metal-dielectric hybrid nanoparticles under ultrafast pulsed excitation: a theoretical investigation

Crucial to effective optical trapping is the ability to precisely control the nature of force/potential to be attractive or repulsive. The nature of particles being trapped is as important as the role of laser parameters in determining the stability of the optical trap. In this context, hybrid particles comprising of both dielectric and metallic materials offer a wide range of new possibilities due to their tunable optical properties. On the other hand, femtosecond pulsed excitation is shown to provide additional advantages in tuning of trap stiffness through harnessing optical and thermal nonlinearity. Here we demonstrate that (metal/dielectric hybrid) core/shell type and hollow-core type nanoparticles experience more force than conventional core-type nanoparticles under both continuous-wave and, in particular, ultrafast pulsed excitation. Thus, for the first time, we show how tuning both materials properties as well as the nature of excitation can impart unprecedented control over nanoscale optical trapping and manipulation leading to a wide range of applications.

Substrate Stiffness Mediates Formation of Novel Cytoskeletal Structures in Fibroblasts during Cell-Microspheres Interaction

It is well known that living cells interact mechanically with their microenvironment. Many basic cell functions, like migration, proliferation, gene expression, and differentiation, are influenced by external forces exerted on the cell. That is why it is extremely important to study how mechanical properties of the culture substrate influence the cellular molecular regulatory pathways. Optical microscopy is one of the most common experimental method used to visualize and study cellular processes. Confocal microscopy allows to observe changes in the 3D organization of the cytoskeleton in response to a precise mechanical stimulus applied with, for example, a bead trapped with optical tweezers. Optical tweezers-based method (OT) is a microrheological technique which employs a focused laser beam and polystyrene or latex beads to study mechanical properties of biological systems. Latex beads, functionalized with a specific protein, can interact with proteins located on the surface of the cellular membrane. Such interaction can significantly affect the cell's behavior. In this work, we demonstrate that beads alone, placed on the cell surface, significantly change the architecture of actin, microtubule, and intermediate filaments. We also show that the observed molecular response to such stimulus depends on the duration of the cell-bead interaction. Application of cytoskeletal drugs: cytochalasin D, jasplakinolide, and docetaxel, abrogates remodeling effects of the cytoskeleton. More important, when cells are plated on elastic substrates, which mimic the mechanical properties of physiological cellular environment, we observe formation of novel, "cup-like" structures formed by the microtubule cytoskeleton upon interaction with latex beads. These results provide new insights into the function of the microtubule cytoskeleton. Based on these results, we conclude that rigidity of the substrate significantly affects the cellular processes related to every component of the cytoskeleton, especially their architecture.

Micromanipulation of amyloplasts with optical tweezers in Arabidopsis stems

Intracellular sedimentation of highly dense, starch-filled amyloplasts toward the gravity vector is likely a key initial step for gravity sensing in plants. However, recent live-cell imaging technology revealed that most amyloplasts continuously exhibit dynamic, saltatory movements in the endodermal cells of Arabidopsis stems. These complicated movements led to questions about what type of amyloplast movement triggers gravity sensing. Here we show that a confocal microscope equipped with optical tweezers can be a powerful tool to trap and manipulate amyloplasts noninvasively, while simultaneously observing cellular responses such as vacuolar dynamics in living cells. A near-infrared (λ=1064 nm) laser that was focused into the endodermal cells at 1 mW of laser power attracted and captured amyloplasts at the laser focus. The optical force exerted on the amyloplasts was theoretically estimated to be up to 1 pN. Interestingly, endosomes and trans-Golgi network were trapped at 30 mW but not at 1 mW, which is probably due to lower refractive indices of these organelles than that of the amyloplasts. Because amyloplasts are in close proximity to vacuolar membranes in endodermal cells, their physical interaction could be visualized in real time. The vacuolar membranes drastically stretched and deformed in response to the manipulated movements of amyloplasts by optical tweezers. Our new method provides deep insights into the biophysical properties of plant organelles in vivo and opens a new avenue for studying gravity-sensing mechanisms in plants.

Plant cell divisions: variations from the shortest symmetric path

In plants, the spatial arrangement of cells within tissues and organs is a direct consequence of the positioning of the new cell walls during cell division. Since the nineteenth century, scientists have proposed rules to explain the orientation of plant cell divisions. Most of these rules predict the new wall will follow the shortest path passing through the cell centroid halving the cell into two equal volumes. However, in some developmental contexts, divisions deviate significantly from this rule. In these situations, mechanical stress, hormonal signalling, or cell polarity have been described to influence the division path. Here we discuss the mechanism and subcellular structure required to define the cell division placement then we provide an overview of the situations where division deviates from the shortest symmetric path.

Laser Induced Aggregation of Light Absorbing Particles by Marangoni Convection

Laser induced Marangoni convection can be used to accumulate micro-particles. In this paper, a method is developed to control and accumulate the light absorbing particles dispersed in a thin solution layer. The particles are irradiated by a focused laser beam. Due to the photothermal effect of the particles, the laser heating generates a thermal gradient and induces a convective flow around the laser’s heating center. The convective flow drives the particles to accumulate and form a particle aggregate close to the laser’s heating center. The motion of particles is dominated by the Marangoni convection. When the laser power is high, the vapor bubbles generated by laser heating on particles strengthen the convection, which accelerates the particles’ aggregation.

Genetic Material Manipulation and Modification by Optical Trapping and Nanosurgery-A Perspective

Light can be employed as a tool to alter and manipulate matter in many ways. An example has been the implementation of optical trapping, the so called optical tweezers, in which light can hold and move small objects with 3D control. Of interest for the Life Sciences and Biotechnology is the fact that biological objects in the size range from tens of nanometers to hundreds of microns can be precisely manipulated through this technology. In particular, it has been shown possible to optically trap and move genetic material (DNA and chromatin) using optical tweezers. Also, these biological entities can be severed, rearranged and reconstructed by the combined use of laser scissors and optical tweezers. In this review, the background, current state and future possibilities of optical tweezers and laser scissors to manipulate, rearrange and alter genetic material (DNA, chromatin and chromosomes) will be presented. Sources of undesirable effects by the optical procedure and measures to avoid them will be discussed. In addition, first tentative approaches at cellular-level genetic and organelle surgery, in which genetic material or DNA-carrying organelles are extracted out or introduced into cells, will be presented.

Optical Forces: From Fundamental to Biological Applications

Optical forces, generally arising from changes of field gradients or linear momentum carried by photons, form the basis for optical trapping and manipulation. Advances in optical forces help to reveal the nature of light-matter interactions, giving answers to a wide range of questions and solving problems across various disciplines, and are still yielding new insights in many exciting sciences, particularly in the fields of biological technology, material applications, and quantum sciences. This review focuses on recent advances in optical forces, ranging from fundamentals to applications for biological exploration. First, the basics of different types of optical forces with new light-matter interaction mechanisms and near-field techniques for optical force generation beyond the diffraction limit with nanometer accuracy are described. Optical forces for biological applications from in vitro to in vivo are then reviewed. Applications from individual manipulation to multiple assembly into functional biophotonic probes and soft-matter superstructures are discussed. At the end future directions for application of optical forces for biological exploration are provided.

Fantastic Voyage of Nanomotors into the Cell

Richard Feynman's 1959 vision of controlling devices at small scales and swallowing the surgeon has inspired the science-fiction Fantastic Voyage film and has played a crucial role in the rapid development of the microrobotics field. Sixty years later, we are currently witnessing a dramatic progress in this field, with artificial micro- and nanoscale robots moving within confined spaces, down to the cellular level, and performing a wide range of biomedical applications within the cellular interior while addressing the limitations of common passive nanosystems. In this review article, we discuss key recent advances in the field of micro/nanomotors toward important cellular applications. Specifically, we outline the distinct capabilities of nanoscale motors for such cellular applications and illustrate how the active movement of nanomotors leads to distinct advantages of rapid cell penetration, accelerated intracellular sensing, and effective intracellular delivery toward enhanced therapeutic efficiencies. We finalize by discussing the future prospects and key challenges that such micromotor technology face toward implementing practical intracellular applications. By increasing our knowledge of nanomotors' cell entry and of their behavior within the intracellular space, and by successfully addressing key challenges, we expect that next-generation nanomotors will lead to exciting advances toward cell-based diagnostics and therapy.

Gear-like rotatable optical trapping with radial carpet beams

Optical tweezers have become a powerful tool in the fields of biology, soft condensed matter physics, and nanotechnology. Here, we report the use of recently introduced radial carpet beams (RCBs) in the optical tweezers setup to trap multiple particles. An RCB is produced by diffraction of a plane or Gaussian beam from an amplitude radial grating. Because of the radial symmetry of the grating, all the diffraction orders are propagated along the optical axis and are used for trapping. Based on the number of grating spokes, the produced RCB has a definite number of high-intensity spots on the transverse plane located over a circular ring. These high-intensity spots of the beam provide multi-traps when it passes through an objective lens and have enough gradient force to trap polystyrene and silica particles. Moreover, the diffracted light from the grating has this property to transfer the angular momentum. We show that the multi-trapped birefringent particles could rotate in their own traps when polarization of the trapping RCB to be circular. In addition, the orbital rotation of the particles is simply executable by manually rotating the grating in its plane around the optical axis.

Creating Custom Neural Circuits on Multiple Electrode Arrays Utilizing Optical Tweezers for Precise Nerve Cell Placement

Precise creation, maintenance, and monitoring of neuronal circuits would facilitate the investigation of subjects such as neuronal development or synaptic plasticity, or assist in the development of neuronal prosthetics. Here we present a method to precisely control the placement of multiple types of neuronal retinal cells onto a commercially available multiple electrode array (MEA), using custom-built optical tweezers. We prepared the MEAs by coating a portion of the MEA with a non-adhesive substrate (Poly (2-hydroxyethyl methacrylate)), and the electrodes with an adhesive cell growth substrate. We then dissociated the retina of adult tiger salamanders, plated them onto prepared MEAs, and utilized the optical tweezers to create retinal circuitry mimicking in vivo connections. In our hands, the optical tweezers moved ~75% of photoreceptors, bipolar cells, and multipolar cells, an average of ~2000 micrometers, at a speed of ~16 micrometers/second. These retinal circuits were maintained in vitro for seven days. We confirmed electrophysiological activity by stimulating the photoreceptors with the MEA and measuring their response with calcium imaging. In conclusion, we have developed a method of utilizing optical tweezers in conjunction with MEAs that allows for the design and maintenance of custom neural circuits for functional analysis.

Single-Molecule Biophysical Techniques to Study Actomyosin Force Transduction

Inside the cellular environment, molecular motors can work in concert to conduct a variety of important physiological functions and processes that are vital for the survival of a cell. However, in order to decipher the mechanism of how these molecular motors work, single-molecule microscopy techniques have been popular methods to understand the molecular basis of the emerging ensemble behavior of these motor proteins.In this chapter, we discuss various single-molecule biophysical imaging techniques that have been used to expose the mechanics and kinetics of myosins. The chapter should be taken as a general overview and introductory guide to the many existing techniques; however, since other chapters will discuss some of these techniques more thoroughly, the readership should refer to those chapters for further details and discussions. In particular, we will focus on scattering-based single-molecule microscopy methods, some of which have become more popular in the recent years and around which the work in our laboratories has been centered.

Optical Tweezers in Studies of Red Blood Cells

Optical tweezers (OTs) are innovative instruments utilized for the manipulation of microscopic biological objects of interest. Rapid improvements in precision and degree of freedom of multichannel and multifunctional OTs have ushered in a new era of studies in basic physical and chemical properties of living tissues and unknown biomechanics in biological processes. Nowadays, OTs are used extensively for studying living cells and have initiated far-reaching influence in various fundamental studies in life sciences. There is also a high potential for using OTs in haemorheology, investigations of blood microcirculation and the mutual interplay of blood cells. In fact, in spite of their great promise in the application of OTs-based approaches for the study of blood, cell formation and maturation in erythropoiesis have not been fully explored. In this review, the background of OTs, their state-of-the-art applications in exploring single-cell level characteristics and bio-rheological properties of mature red blood cells (RBCs) as well as the OTs-assisted studies on erythropoiesis are summarized and presented. The advance developments and future perspectives of the OTs' application in haemorheology both for fundamental and practical in-depth studies of RBCs formation, functional diagnostics and therapeutic needs are highlighted.

Probing force in living cells with optical tweezers: from single-molecule mechanics to cell mechanotransduction

The invention of optical tweezers more than three decades ago has opened new avenues in the study of the mechanical properties of biological molecules and cells. Quantitative force measurements still represent a challenging task in living cells due to the complexity of the cellular environment. Here, we review different methodologies to quantitatively measure the mechanical properties of living cells, the strength of adhesion/receptor bonds, and the active force produced during intracellular transport, cell adhesion, and migration. We discuss experimental strategies to attain proper calibration of optical tweezers and molecular resolution in living cells. Finally, we show recent studies on the transduction of mechanical stimuli into biomolecular and genetic signals that play a critical role in cell health and disease.

Optical Tweezers: A Force to Be Reckoned With

The 2018 Nobel Prize in Physics has been awarded jointly to Arthur Ashkin for the discovery and development of optical tweezers and their applications to biological systems and to Gérard Mourou and Donna Strickland for the invention of laser chirped pulse amplification. Here we focus on Arthur Ashkin and how his revolutionary work opened a window into the world of molecular mechanics and spurred the rise of single-molecule biophysics.

Optical Tweezers: Phototoxicity and Thermal Stress in Cells and Biomolecules

For several decades optical tweezers have proven to be an invaluable tool in the study and analysis of myriad biological responses and applications. However, as with every tool, they can have undesirable or damaging effects upon the very sample they are helping to study. In this review the main negative effects of optical tweezers upon biostructures and living systems will be presented. There are three main areas on which the review will focus: linear optical excitation within the tweezers, non-linear photonic effects, and thermal load upon the sampled volume. Additional information is provided on negative mechanical effects of optical traps on biological structures. Strategies to avoid or, at least, minimize these negative effects will be introduced. Finally, all these effects, undesirable for the most, can have positive applications under the right conditions. Some hints in this direction will also be discussed.

Differentiation of single lymphoma primary cells and normal B-cells based on their adhesion to mesenchymal stromal cells in optical tweezers

We have adapted a non-invasive method based on optical tweezers technology to differentiate between the normal B-cells and the B-cell non-Hodgkin lymphoma (B-NHL) cells derived from clinical samples. Our approach bases on the nascent adhesion between an individual B-cell and a mesenchymal stromal cell. In this study, a single B-cell was trapped and optically seeded on a mesenchymal stromal cell and kept in a direct contact with it until a stable connection between the cells was formed in time scale. This approach allowed us to avoid the introduction of any exogenous beads or chemicals into the experimental setup which would have affected the cell-to-cell adhesion. Here, we have provided new evidence that aberrant adhesive properties found in transformed B-cells are related to malignant neoplasia. We have demonstrated that the mean time required for establishing adhesive interactions between an individual normal B-cell and a mesenchymal stromal cell was 26.7 ± 16.6 s, while for lymphoma cell it was 208.8 ± 102.3 s, p < 0.001. The contact time for adhesion to occur ranged from 5 to 90 s and from 60 to 480 s for normal B-cells and lymphoma cells, respectively. This method for optically controlled cell-to-cell adhesion in time scale is beneficial to the successful differentiation of pathological cells from normal B-cells within the fine needle aspiration biopsy of a clinical sample. Additionally, variations in time-dependent adhesion among subtypes of B-NHL, established here by the optical trapping, confirm earlier results pertaining to cell heterogeneity.

The 2018 Nobel Prize in Physics: optical tweezers and chirped pulse amplification

The 2018 Nobel Prize in Physics was awarded to Arthur Ashkin (prize share ½), Gérard Mourou (prize share ¼), and Donna Strickland (prize share ¼) for "groundbreaking inventions in the field of laser physics." This feature article summarizes the development of "optical tweezers and their application to biological systems" by Arthur Ashkin, as well as the Mourou/Strickland method of "generating high-intensity, ultrashort optical pulses" known as chirped pulse amplification. Further developments are also briefly discussed.

Cell geometry determines symmetric and asymmetric division plane selection in Arabidopsis early embryos

Plant tissue architecture and organ morphogenesis rely on the proper orientation of cell divisions. Previous attempts to predict division planes from cell geometry in plants mostly focused on 2D symmetric divisions. Using the stereotyped division patterns of Arabidopsis thaliana early embryogenesis, we investigated geometrical principles underlying plane selection in symmetric and in asymmetric divisions within complex 3D cell shapes. Introducing a 3D computational model of cell division, we show that area minimization constrained on passing through the cell centroid predicts observed divisions. Our results suggest that the positioning of division planes ensues from cell geometry and gives rise to spatially organized cell types with stereotyped shapes, thus underlining the role of self-organization in the developing architecture of the embryo. Our data further suggested the rule could be interpreted as surface minimization constrained by the nucleus position, which was validated using live imaging of cell divisions in the stomatal cell lineage.

The proper positioning of division planes is key for correct development and morphogenesis of organs, in particular in plants were cellular walls prevent cell rearrangements. Elucidating how division planes are selected is therefore essential to decipher the cellular bases of plant morphogenesis. Previous attempts to identify geometrical rules relating cell shape and division plane positioning in plants mostly focused on symmetric divisions in tissues reduced to 2D geometries. Here, we combined 3D quantitative image analysis and a new 3D cell division model to evaluate the existence of geometrical rules in asymmetrical and symmetrical divisions of complex cell shapes. We show that in the early embryo of the model plant Arabidopsis thaliana, which presents stereotyped but complex cell division patterns, a single geometrical rule (area minimization constrained on passing through the cell centroid) recapitulates the complete sequence of division events. This new rule, valid for both symmetrical and asymmetrical divisions, generalizes previously proposed cell division rules and can be interpreted based on the dynamics of the cytoskeleton and on the positioning of the nucleus, a hypothesis that we validated using leaf cell division patterns. This work highlights the importance of self-organization in plant early morphogenesis and the emergence of robust cellular organizations based on geometrical feedback loops between cell geometry and division plane selection.

Recent Progress in Two-Dimensional Nanomaterials for Laser Protection

The Nobel Prize in Physics 2018, “For groundbreaking inventions in the field of laser physics”, went to Arthur Ashkin and Gérard Mourou and Donna Strickland. Their inventions have revolutionized laser physics and greatly promoted the development of laser instruments, which have penetrated into many aspects of people’s daily lives. However, for the purpose of protecting human eyes or optical instruments from being damaged by both pulsed and continuous wave laser radiation, the research on laser protective materials is of particular significance. Due to the intriguing and outstanding physical, chemical, and structural properties, two-dimensional (2D) nanomaterials have been extensively studied as optical limiting (OL) materials owing to their broadband nonlinear optical (NLO) response and fast carrier relaxation dynamics that are important for reducing the laser intensity. This review systematically describes the OL mechanisms and the recent progress in 2D nanomaterials for laser protection.

Optical Trapping, Optical Binding, and Rotational Dynamics of Silicon Nanowires in Counter-Propagating Beams

Silicon nanowires are held and manipulated in controlled optical traps based on counter-propagating beams focused by low numerical aperture lenses. The double-beam configuration compensates light scattering forces enabling an in-depth investigation of the rich dynamics of trapped nanowires that are prone to both optical and hydrodynamic interactions. Several polarization configurations are used, allowing the observation of optical binding with different stable structure as well as the transfer of spin and orbital momentum of light to the trapped silicon nanowires. Accurate modeling based on Brownian dynamics simulations with appropriate optical and hydrodynamic coupling confirms that this rich scenario is crucially dependent on the non-spherical shape of the nanowires. Such an increased level of optical control of multiparticle structure and dynamics open perspectives for nanofluidics and multi-component light-driven nanomachines.

Capturing magnetic bead-based arrays using perpendicular magnetic anisotropy

Designing and implementing means of locally trapping magnetic beads and understanding the factors underlying the bead capture force are important steps toward advancing the capture-release process of magnetic particles for biological applications. In particular, capturing magnetically labeled cells using magnetic microstructures with perpendicular magnetic anisotropy (PMA) will enable an approach to cell manipulation for emerging lab-on-a-chip devices. Here, a Co (0.2 nm)/Ni (0.4 nm) multilayered structure was designed to exhibit strong PMA and large saturation magnetization (M _s ). Finite element simulations were performed to assess the dependence of the capture force on the value of M _s . The simulated force profile indicated the largest force at the perimeter of the disks. Arrays of Co/Ni disk structures of (4-7) μm diameter were fabricated and tested in a microchannel with suspended fluorescent magnetic beads. The magnetic beads were captured and localized to the edge of the disks as predicted by the simulations. This approach has been demonstrated to enable uniform assembly of magnetic beads without external fields and may provide a pathway toward precise cell manipulation methods.

Lessons from optical tweezers: quantifying organelle interactions, dynamics and modelling subcellular events

Optical tweezers enable users to physically trap organelles and move them laterally within the plant cell. Recent advances have highlighted physical interactions between functionally related organelle pairs, such as ER-Golgi and peroxisome-chloroplast, and have shown how organelle positioning affects plant growth. Quantification of these processes has provided insight into the force components which ultimately drive organelle movement and positioning in plant cells. Application of optical tweezers has therefore revolutionised our understanding of plant organelle dynamics.

A vector holographic optical trap

The invention of optical tweezers almost forty years ago has triggered applications spanning multiple disciplines and has also found its way into commercial products. A major breakthrough came with the invention of holographic optical tweezers (HOTs), allowing simultaneous manipulation of many particles, traditionally done with arrays of scalar beams. Here we demonstrate a vector HOT with arrays of digitally controlled Higher-Order Poincaré Sphere (HOPS) beams. We employ a simple set-up using a spatial light modulator and show that each beam in the array can be manipulated independently and set to an arbitrary HOPS state, including replicating traditional scalar beam HOTs. We demonstrate trapping and tweezing with customized arrays of HOPS beams comprising scalar orbital angular momentum and cylindrical vector beams, including radially and azimuthally polarized beams simultaneously in the same trap. Our approach is general enough to be easily extended to arbitrary vector beams, could be implemented with fast refresh rates and will be of interest to the structured light and optical manipulation communities alike.

Low-Power Optical Trapping of Nanoparticles and Proteins with Resonant Coaxial Nanoaperture Using 10 nm Gap

We present optical trapping with a 10 nm gap resonant coaxial nanoaperture in a gold film. Large arrays of 600 resonant plasmonic coaxial nanoaperture traps are produced on a single chip via atomic layer lithography with each aperture tuned to match a 785 nm laser source. We show that these single coaxial apertures can act as efficient nanotweezers with a sharp potential well, capable of trapping 30 nm polystyrene nanoparticles and streptavidin molecules with a laser power as low as 4.7 mW. Furthermore, the resonant coaxial nanoaperture enables real-time label-free detection of the trapping events via simple transmission measurements. Our fabrication technique is scalable and reproducible, since the critical nanogap dimension is defined by atomic layer deposition. Thus our platform shows significant potential to push the limit of optical trapping technologies.

Cell membrane biophysics with optical tweezers

Membrane elastic properties play important roles in regulating cell shape, motility, division and differentiation. Here I review optical tweezer (OT) investigations of membrane surface tension and bending modulus, emphasizing didactic aspects and insights provided for cell biology. OT measurements employ membrane-attached microspheres to extract long cylindrical nanotubes named tethers. The Helfrich-Canham theory yields elastic parameters in terms of tether radius and equilibrium extraction force. It assumes initial point-like microsphere attachment and no cytoskeleton content within tethers. Experimental force-displacement curves reveal violations of those assumptions, and I discuss proposed explanations of such discrepancies, as well as recommended OT protocols. Measurements of elastic parameters for predominant cell types in the central nervous system yield correlations between their values and cell function. Micro-rheology OT experiments extend these correlations to viscoelastic parameters. The results agree with a quasi-universal phenomenological scaling law and are interpreted in terms of the soft glass rheology model. Spontaneously-generated cell nanotube protrusions are also briefly reviewed, emphasizing common features with tethers. Filopodia as well as tunneling nanotubes (TNT), which connect distant cells and allow transfers between their cytoplasms, are discussed, including OT tether pulling from TNTs which mediate communication among bacteria, even of different species. Pathogens, including bacteria, viruses and prions, opportunistically exploit TNTs for cell-to-cell transmission of infection, indicating that TNTs have an ancient evolutionary origin.

Single-Beam Acoustic Trapping of Red Blood Cells and Polystyrene Microspheres in Flowing Red Blood Cell Saline and Plasma Suspensions

Single-beam acoustic tweezers (SBATs) represent a new technology for particle and cell trapping. The advantages of SBATs are their deep penetration into tissues, reduction of tissue damage and ease of application to in vivo studies. The use of these tools for applications in drug delivery in vivo must meet the following conditions: large penetration depth, strong trapping force and tissue safety. A reasonable penetration depth for SBATs in the development of in vivo applications was established in a previous study conducted in water with zero velocity. However, capturing objects in flowing fluid can provide more meaningful results. In this study, we investigated the capability of SBATs to trap red blood cells (RBCs) and polystyrene microspheres in flowing RBC suspensions. Two different types of RBC suspension were prepared in this work: an RBC phosphate-buffered saline (PBS) suspension and an RBC plasma suspension. The results indicated that SBATs successfully trapped RBCs and polystyrene microspheres in a flowing RBC PBS suspension with an average steady velocity of 1.6 cm/s in a 2-mm-diameter polyimide. Furthermore, SBATs were found able to trap RBCs in a flowing RBC PBS suspension at speeds as high as 7.9 cm/s in a polyimide tube, which is higher than the velocity in capillaries (0.03 cm/s) and approaches the velocity in arterioles and venules. Moreover, the results also indicated that polystyrene microspheres can be trapped in an RBC plasma suspension, where aggregation is observed. This work represents a step forward in using this tool in actual in vivo experimentation.

Manipulation and Motion of Organelles and Single Molecules in Living Cells

The biomolecule is among the most important building blocks of biological systems, and a full understanding of its function forms the scaffold for describing the mechanisms of higher order structures as organelles and cells. Force is a fundamental regulatory mechanism of biomolecular interactions driving many cellular processes. The forces on a molecular scale are exactly in the range that can be manipulated and probed with single molecule force spectroscopy. The natural environment of a biomolecule is inside a living cell, hence, this is the most relevant environment for probing their function. In vivo studies are, however, challenged by the complexity of the cell. In this review, we start with presenting relevant theoretical tools for analyzing single molecule data obtained in intracellular environments followed by a description of state-of-the art visualization techniques. The most commonly used force spectroscopy techniques, namely optical tweezers, magnetic tweezers, and atomic force microscopy, are described in detail, and their strength and limitations related to in vivo experiments are discussed. Finally, recent exciting discoveries within the field of in vivo manipulation and dynamics of single molecule and organelles are reviewed.

Precise control and measurement of solid–liquid interfacial temperature and viscosity using dual-beam femtosecond optical tweezers in the condensed phase

We present a novel method of microrheology based on femtosecond optical tweezers, which in turn enables us to directly measure and controlin situtemperature at microscale volumes at the solid–liquid interface.

Enhancing the branching ratios in the dissociation channels for O(16)O(16)O(18) molecule by designing optimum laser pulses: A study using stochastic optimization

We propose a strategy of using a stochastic optimization technique, namely, simulated annealing to design optimum laser pulses (both IR and UV) to achieve greater fluxes along the two dissociating channels (O(18) + O(16)O(16) and O(16) + O(16)O(18)) in O(16)O(16)O(18) molecule. We show that the integrated fluxes obtained along the targeted dissociating channel is larger with the optimized pulse than with the unoptimized one. The flux ratios are also more impressive with the optimized pulse than with the unoptimized one. We also look at the evolution contours of the wavefunctions along the two channels with time after the actions of both the IR and UV pulses and compare the profiles for unoptimized (initial) and optimized fields for better understanding the results that we achieve. We also report the pulse parameters obtained as well as the final shapes they take.

Acoustical pulling force of a limited-diffracting annular beam centered on a sphere

A rigorous method is developed to investigate the generation of a negative (attracting) force acting in the opposite direction of wave propagation using a limited-diffracting single annular piezo-ring transducer. Based on the Rayleigh- Sommerfeld diffraction integral and the addition theorems for the Legendre and spherical wave functions, the expression for the incident velocity potential field (which is an exact solution of the Helmholtz equation) is derived analytically, and exact closed-form partial-wave series expansions for the incident and scattered fields are obtained without any approximations. The total (incident + scattered) field expression is used to evaluate the time-averaged acoustic radiation force (ARF) on a sphere centered on the beam's axis in a nonviscous fluid. Numerical predictions for the scattering and ARF performed with particular emphasis on the annular-ring's radial thickness, the distance separating the sphere from the acoustic source, the size of the transducer, as well as the sphere's elastic properties, reveal some conditions where a pulling axial ARF directed toward the annular ring-source surface arises. The simplicity and reliability of the annular-ring geometry demonstrated here provides a substantial solution with widespread applications in the experimental design of acoustical limited-diffracting beams operating over an extended axial depth-of-field for contactless and dexterous particle manipulation.

Controlling local temperature in water using femtosecond optical tweezer

A novel method of directly observing the effect of temperature rise in water at the vicinity of optical trap center is presented. Our approach relies on changed values of corner frequency of the optical trap that, in turn, is realized from its power spectra. Our two color experiment is a unique combination of a non-heating femtosecond trapping laser at 780 nm, coupled to a femtosecond infrared heating laser at 1560 nm, which precisely controls temperature at focal volume of the trap center using low powers (100-800 µW) at high repetition rate. The geometric ray optics model quantitatively supports our experimental data.

Non-contact intracellular binding of chloroplasts in vivo

Non-contact intracellular binding and controllable manipulation of chloroplasts in vivo was demonstrated using an optical fiber probe. Launching a 980-nm laser beam into a fiber, which was placed about 3 μm above the surface of a living plant (Hydrilla verticillata) leaf, enabled stable binding of different numbers of chloroplasts, as well as their arrangement into one-dimensional chains and two-dimensional arrays inside the leaf without damaging the chloroplasts. Additionally, the formed chloroplast chains were controllably transported inside the living cells. The optical force exerted on the chloroplasts was calculated to explain the experimental results. This method provides a flexible method for studying intracellular organelle interaction with highly organized organelle-organelle contact in vivo in a non-contact manner.

Precision assembly of complex cellular microenvironments using holographic optical tweezers

The accurate study of cellular microenvironments is limited by the lack of technologies that can manipulate cells in 3D at a sufficiently small length scale. The ability to build and manipulate multicellular microscopic structures will facilitate a more detailed understanding of cellular function in fields such as developmental and stem cell biology. We present a holographic optical tweezers based technology to accurately generate bespoke cellular micro-architectures. Using embryonic stem cells, 3D structures of varying geometries were created and stabilized using hydrogels and cell-cell adhesion methods. Control of chemical microenvironments was achieved by the temporal release of specific factors from polymer microparticles positioned within these constructs. Complex co-culture micro-environmental analogues were also generated to reproduce structures found within adult stem cell niches. The application of holographic optical tweezers-based micromanipulation will enable novel insights into biological microenvironments by allowing researchers to form complex architectures with sub-micron precision of cells, matrices and molecules.

Effects of coating on the optical trapping efficiency of microspheres via geometrical optics approximation

We present the optical trapping forces that are generated when a single laser beam strongly focuses on a coated dielectric microsphere. On the basis of geometrical optics approximation (GOA), in which a particle intercepts all of the rays that make up a single laser beam, we calculate the trapping forces with varying coating thickness and refractive index values. To increase the optical trapping efficiency, the refractive index (n(b)) of the coating is selected such that n(a) < n(b) < n(c), where na and nc are the refractive indices of the medium and the core material, respectively. The thickness of the coating also increases trapping efficiency. Importantly, we find that trapping forces for the coated particles are predominantly determined by two rays: the incident ray and the first refracted ray to the medium.

Artificially-induced organelles are optimal targets for optical trapping experiments in living cells

Optical trapping supplies information on the structural, kinetic or rheological properties of inner constituents of the cell. However, the application of significant forces to intracellular objects is notoriously difficult due to a combination of factors, such as the small difference between the refractive indices of the target structures and the cytoplasm. Here we discuss the possibility of artificially inducing the formation of spherical organelles in the endoplasmic reticulum, which would contain densely packed engineered proteins, to be used as optimized targets for optical trapping experiments. The high index of refraction and large size of our organelles provide a firm grip for optical trapping and thereby allow us to exert large forces easily within safe irradiation limits. This has clear advantages over alternative probes, such as subcellular organelles or internalized synthetic beads.

Optical clearing at cellular level

Strong light scattering in tissues and blood reduces the usability of many optical techniques. By reducing scattering, optical clearing enables deeper light penetration and improves resolution in several optical imaging applications. We demonstrate the usage of optical tweezers and elastic light scattering to study optical clearing [one of the major mechanisms-matching of refractive indices (RIs)] at the single particle and cell level. We used polystyrene spheres and human red blood cells (RBCs) as samples and glycerol or glucose water solutions as clearing agents. Optical tweezers kept single microspheres and RBCs in place during the measurement of light scattering patterns. The results show that optical clearing reduces the scattering cross section and increases g. Glucose also decreased light scattering from a RBC. Optical clearing affected the anisotropy factor g of 23.25-μm polystyrene spheres, increasing it by 0.5% for an RI change of 2.2% (20% glycerol) and 0.3% for an RI change of 1.1% (13% glucose).

Indirect pushing based automated micromanipulation of biological cells using optical tweezers

In this paper, we introduce an indirect pushing based technique for automated micromanipulation of biological cells. In indirect pushing, an optically trapped glass bead pushes a freely diffusing intermediate bead that in turn pushes a freely diffusing target cell towards a desired goal. Some cells can undergo significant changes in their behaviors as a result of direct exposure to a laser beam. Indirect pushing eliminates this problem by minimizing the exposure of the cell to the laser beam. We report an automated feedback planning algorithm that combines three motion maneuvers, namely, push, align, and backup for micromanipulation of cells. We have developed a dynamics based simulation model of indirect pushing dynamics and also identified parameters of measurement noise using physical experiments. We present an optimization-based approach for automated tuning of planner parameters to enhance its robustness. Finally, we have tested the developed planner using our optical tweezers physical setup and carried out a detailed analysis of the experimental results. The developed approach can be utilized in biological experiments for studying collective cell migration by accurately arranging the cells in arrays without exposing them to a laser beam.

Comparative study of methods to calibrate the stiffness of a single-beam gradient-force optical tweezers over various laser trapping powers

Optical tweezers have become an important instrument in force measurements associated with various physical, biological, and biophysical phenomena. Quantitative use of optical tweezers relies on accurate calibration of the stiffness of the optical trap. Using the same optical tweezers platform operating at 1064 nm and beads with two different diameters, we present a comparative study of viscous drag force, equipartition theorem, Boltzmann statistics, and power spectral density (PSD) as methods in calibrating the stiffness of a single beam gradient force optical trap at trapping laser powers in the range of 0.05 to 1.38 W at the focal plane. The equipartition theorem and Boltzmann statistic methods demonstrate a linear stiffness with trapping laser powers up to 355 mW, when used in conjunction with video position sensing means. The PSD of a trapped particle's Brownian motion or measurements of the particle displacement against known viscous drag forces can be reliably used for stiffness calibration of an optical trap over a greater range of trapping laser powers. Viscous drag stiffness calibration method produces results relevant to applications where trapped particle undergoes large displacements, and at a given position sensing resolution, can be used for stiffness calibration at higher trapping laser powers than the PSD method.

Single particle detection, manipulation and analysis with resonant optical trapping in photonic crystals

We demonstrate a resonant optical trapping mechanism based on two-dimensional hollow photonic crystal cavities. This approach benefits simultaneously from the resonant nature and unprecedented field overlap with the trapped specimen. The photonic crystal structures are implemented in a 30 mm × 12 mm optofluidic chip consisting of a patterned silicon substrate and an ultrathin microfluidic membrane for particle injection and control. Firstly, we demonstrate permanent trapping of single 250 and 500 nm-sized particles with sub-mW powers. Secondly, the particle induces a large resonance shift of the cavity mode amounting up to several linewidths. This shift is exploited to detect the presence of a particle within the trap and to retrieve information on the trapped particle. The individual addressability of multiple cavities on a single photonic crystal device is also demonstrated.