Rapid refolding of a proline-rich all-beta-sheet fibronectin type III module

Design and Synthesis of Monobody Variants with Low Immunogenicity

Mirror-image proteins (d-proteins) are promising scaffolds for drug discovery because of their high proteolytic stability and low immunogenic properties. Facile and reproducible processes for the preparation of functional d-proteins are required for their application in therapeutic biologics. In this study, we designed and synthesized a novel monobody variant with two cysteine substitutions that facilitate the synthetic process via sequential native chemical ligations and improve protein stability by disulfide bond formation. The synthetic anti-GFP monobody in this model study exhibited good binding affinity to the target enhanced green fluorescent protein. In vivo administration of the synthetic anti-GFP monobody (l-monobody) to mice induced antidrug antibody (ADA) production, whereas no ADA production was observed following immunization with the mirror-image anti-GFP monobody (d-monobody). These results suggest that the synthetic d-monobody is a non-antibody protein scaffold with low immunogenic properties.

Replacement of the native cis prolines by alanine leads to simplification of the complex folding mechanism of a small globular protein

The folding mechanism of MNEI, a single-chain variant of naturally occurring double-chain monellin, is complex, with multiple parallel refolding channels. To determine whether its folding energy landscape could be simplified, the two native cis-prolines, Pro41 and Pro93, were mutated, singly and together, to Ala. The stability of P93A was the same as that of the wild-type protein, pWT; however, P41A and P41AP93A were destabilized by ∼0.9 kcal mol-1. The effects of the mutations on the very fast, fast, slow, and very slow phases of folding were studied. They showed that heterogeneity in the unfolded state arises due to cis to trans isomerization of the Gly92-Pro93 peptide bond. The Pro41 to Ala mutation abolished the very slow phase of folding, whereas surprisingly, the Pro93 to Ala mutation abolished the very fast phase of folding. Double-jump, interrupted folding experiments indicated that two sequential trans to cis proline isomerization steps, of the Gly92-Pro93 peptide bond followed by the Arg40-Pro41 peptide bond, lead to the formation of the native state. They also revealed the accumulation of a late native-like intermediate, N∗, which differs from the native state in the isomeric status of the Arg40-Pro41 bond, as well as in a few tertiary contacts as monitored by near-UV CD measurements. The Pro to Ala mutations not only eliminated the cis to trans Pro isomerization reaction in the unfolded state, but also the two trans to cis Pro isomerization reactions during folding. By doing so, and by differentially affecting the relative stabilities of folding intermediates, the mutations resulted in a simplification of the folding mechanism. The two Pro to Ala mutations together accelerate folding to such an extent that the native state forms more than 1000-fold faster than in the case of pWT.

FN3 Domain Displaying Double Epitopes: A Cost-Effective Strategy for Producing Substitute Antigens

Construction of substitute antigens based on alternative scaffold proteins is a promising strategy in bioassay technology. In this study, we proposed a strategy for constructing substitute antigens derived from 10th human fibronectin type III (FN3) using two peptide epitopes of terminal pro-brain natriuretic peptide (NT-proBNP) as an example. The base sequences encoding the two antigenic epitopes of NT-proBNP were recombined into the FG loop region and the C-terminus of FN3, fused by 4 GS or polyN linker. The fusion proteins (named FN3-epitopes-4GS and FN3-epitopes-polyN, respectively) were expressed and purified cost-effectively using an Escherichia coli expression system. The immunoreactivity of recombinant substitutes was preliminarily confirmed by western blot analysis using epitope-specific antibodies. The sandwich enzyme-linked immunosorbent assay demonstrated that either FN3-epitopes-polyN or FN3-epitopes-4GS was highly sensitive, and FN3-epitopes-polyN exhibited better kinetics to specific antibodies than FN3-epitopes-4GS, showing a linear dose-response relationship in the concentration range of 0.06–12.85 ng/ml, which suggest that the polyN linker was more suitable for constructing the FN3-based substitute antigens compared to the 4 GS linker. Furthermore, the serum stability test and differential scanning calorimetry analysis showed that the recombinant FN3-epitopes-polyN maintained the original stability of FN3. Therefore, it was confirmed that FN3 could be engineered to construct a stable biomacromolecular substitute for displaying double epitopes of antigen proteins, such as NT-proBNP. In summary, a cost-effective strategy to produce NT-proBNP substitute antigens with good immunoreactivity and physicochemical stability was established in this work, which may provide potential uses for the production of other substitute antigens in the future.

Spectroscopic Evidence of the Salt-Induced Conformational Change around the Localized Electric Charges on the Protein Surface of Fibronectin Type III

The effect of salt on the electrostatic interaction of a protein is an important issue, because addition of salt affects protein stability and association/aggregation. Although adding salt is a generally recognized strategy to improve protein stability, this improvement does not necessarily occur. The lack of an effect upon the addition of salt was previously confirmed for the tenth fibronectin type III domain from human fibronectin (FN3) by thermal stability analysis. However, the detailed molecular mechanism is unknown. In the present study, by employing the negatively charged carboxyl triad on the surface of FN3 as a case study, the molecular mechanism of the inefficient NaCl effect on protein stability was experimentally addressed using spectroscopic methods. Complementary analysis using Raman spectroscopy and 8-anilino-1-naphthalenesulfonic acid fluorescence revealed the three-phase behavior of the salt-protein interaction between NaCl and FN3 over a wide salt concentration range from 100 mM to 4.0 M, suggesting that the Na⁺-specific binding to the negatively charged carboxyl triad causes a local conformational change around the binding site with an accompanying structural change in the overall protein, which contributes to the protein's structural destabilization. This spectroscopic evidence clarifies the molecular understanding of the inefficiency of salt to improve protein stability. The findings will inform the optimization of formulation conditions.

On Force and Form: Mechano-Biochemical Regulation of Extracellular Matrix

The extracellular matrix is well-known for its structural role in supporting cells and tissues, and its important biochemical role in providing signals to cells has increasingly become apparent. These structural and biochemical roles are closely coupled through mechanical forces: the biochemistry of the extracellular matrix determines its mechanical properties, mechanical forces control release or display of biochemical signals from the extracellular matrix, and the mechanical properties of the matrix in turn influence the mechanical set point at which signals are sent. In this Perspective, we explain how the extracellular matrix is regulated by strain and mechanical forces. We show the impact of biochemistry and mechanical forces on in vivo assembly of extracellular matrix and illustrate how matrix can be generated in vitro using a variety of methods. We cover how the matrix can be characterized in terms of mechanics, composition, and conformation to determine its properties and to predict interactions. Finally, we explore how extracellular matrix remodeling, ligand binding, and hemostasis are regulated by mechanical forces. These recently discovered mechano-biochemical interactions have important functions in wound healing and disease progression. It is likely that mechanically altered extracellular matrix interactions are a commonly recurring theme, but due to limited tools to generate extracellular matrix fibers in vitro and lack of high-throughput methods to detect these interactions, it is hypothesized that many of these interactions have yet to be discovered.

Structural and Evolutionary Insights within the Polysaccharide Deacetylase Gene Family of Bacillus anthracis and Bacillus cereus

Functional and folding constraints impose interdependence between interacting sites along the protein chain that are envisaged through protein sequence evolution. Studying the influence of structure in phylogenetic models requires detailed and reliable structural models. Polysaccharide deacetylases (PDAs), members of the carbohydrate esterase family 4, perform mainly metal-dependent deacetylation of O- or N-acetylated polysaccharides such as peptidoglycan, chitin and acetylxylan through a conserved catalytic core termed the NodB homology domain. Genomes of Bacillus anthracis and its relative Bacillus cereus contain multiple genes of putative or known PDAs. A comparison of the functional domains of the recently determined PDAs from B. anthracis and B. cereus and multiple amino acid and nucleotide sequence alignments and phylogenetic analysis performed on these closely related species showed that there were distinct differences in binding site formation, despite the high conservation on the protein sequence, the folding level and the active site assembly. This may indicate that, subject to biochemical verification, the binding site-forming sequence fragments are under functionally driven evolutionary pressure to accommodate and recognize distinct polysaccharide residues according to cell location, use, or environment. Finally, we discuss the suggestion of the paralogous nature of at least two genes of B. anthracis, ba0330 and ba0331, via specific differences in gene sequence, protein structure, selection pressure and available localization patterns. This study may contribute to understanding the mechanisms under which sequences evolve in their structures and how evolutionary processes enable structural variations.

Refolding the unfoldable: A systematic approach for renaturation of Bacillus circulans xylanase

Xylanases are important polysaccharide-cleaving catalysts for the pulp and paper, animal feeds and biofuels industries. They have also proved to be valuable model systems for understanding enzymatic catalysis, with one of the best studied being the GH11 xylanase from Bacillus circulans (Bcx). However, proteins from this class are very recalcitrant to refolding in vitro. This both limits their high level expression in heterologous hosts, and prevents experimental approaches, such as peptide ligation or chemical modifications, to probe and engineer their stability and function. To solve this problem, a systematic screening approach was employed to identify suitable buffer conditions for renaturing Bcx in vitro. The fractional factorial screen employed identified starting conditions for refolding, which were then refined and developed into a generic protocol for renaturing preparative amounts of active Bcx in a 50-60% yield from inclusion bodies. The method is robust and proved equally proficient at refolding circularly permuted versions that carry cysteine mutations. This general approach should be applicable to related GH11 xylanases, as well as proteins adopting a similar β-jellyroll fold, that are otherwise recalcitrant to refolding in vitro.

Structural basis for biofilm formation via the Vibrio cholerae matrix protein RbmA

During the transition from a free-swimming, single-cell lifestyle to a sessile, multicellular state called a biofilm, bacteria produce and secrete an extracellular matrix comprised of nucleic acids, exopolysaccharides, and adhesion proteins. The Vibrio cholerae biofilm matrix contains three major protein components, RbmA, Bap1, and RbmC, which are unique to Vibrio cholerae and appear to support biofilm formation at particular steps in the process. Here, we focus on RbmA, a structural protein with an unknown fold. RbmA participates in the early cell-cell adhesion events and is found throughout the biofilm where it localizes to cell-cell contact sites. We determined crystal structures of RbmA and revealed that the protein folds into tandem fibronectin type III (FnIII) folds. The protein is dimeric in solution and in crystals, with the dimer interface displaying a surface groove that is lined with several positively charged residues. Structure-guided mutagenesis studies establish a crucial role for this surface patch for RbmA function. On the basis of the structure, we hypothesize that RbmA serves as a tether by maintaining flexible linkages between cells and the extracellular matrix.

Design of novel FN3 domains with high stability by a consensus sequence approach

The use of consensus design to produce stable proteins has been applied to numerous structures and classes of proteins. Here, we describe the engineering of novel FN3 domains from two different proteins, namely human fibronectin and human tenascin-C, as potential alternative scaffold biotherapeutics. The resulting FN3 domains were found to be robustly expressed in Escherichia coli, soluble and highly stable, with melting temperatures of 89 and 78°C, respectively. X-ray crystallography was used to confirm that the consensus approach led to a structure consistent with the FN3 design despite having only low-sequence identity to natural FN3 domains. The ability of the Tenascin consensus domain to withstand mutations in the loop regions connecting the β-strands was investigated using alanine scanning mutagenesis demonstrating the potential for randomization in these regions. Finally, rational design was used to produce point mutations that significantly increase the stability of one of the consensus domains. Together our data suggest that consensus FN3 domains have potential utility as alternative scaffold therapeutics.

Target-binding proteins based on the 10th human fibronectin type III domain (¹⁰Fn3)

We describe concepts and methods for generating a family of engineered target-binding proteins designed on the scaffold of the 10th human fibronectin type III domain ((10)Fn3), an extremely stable, single-domain protein with an immunoglobulin-like fold but lacking disulfide bonds. Large libraries of possible target-binding proteins can be constructed on the (10)Fn3 scaffold by diversifying the sequence and length of its surface loops, which are structurally analogous to antibody complementarity-determining regions. Target-binding proteins with high affinity and specificity are selected from (10)Fn3-based libraries using in vitro evolution technologies such as phage display, mRNA display, or yeast-surface display. (10)Fn3-based target-binding proteins have binding properties comparable to those of antibodies, but they are smaller, simpler in architecture, and more user-friendly; as a consequence, these proteins are excellent building blocks for the construction of multidomain, multifunctional chains. The ease of engineering and robust properties of (10)Fn3-based target-binding proteins have been validated by multiple independent academic and industrial groups. In addition to performing well as specific in vitro detection reagents and research tools, (10)Fn3-based binding proteins are being developed as therapeutics, with the most advanced candidate currently in Phase II clinical trials.

Transient opening of fibronectin type III (FNIII) domains: the interaction of the third FNIII domain of FN with anastellin

We previously reported that the fibronectin (FN) type III domains of FN may unfold to interact with anastellin and form FN aggregates. In the present study, we have focused on the interaction between anastellin and the third FN type III domain (III3), which is a key anastellin binding site on FN. Anastellin binding to III3 was monitored by 8-anilino-1-naphthalene sulfonate (ANS) fluorescence. ANS binding to anastellin dramatically increased its emission intensity, but this was reduced to half by the addition of III3, suggesting that ANS and III3 share a common hydrophobic binding site on anastellin. An engineered mutant of III3 that was stabilized by an intrachain disulfide bond did not interact with anastellin, as seen by its failure to interfere with ANS binding to anastellin. We also mutated hydrophobic core residues to destabilize III3 and found that these mutants were still capable of interacting with anastellin. Anastellin binding to III3 was also monitored using an intramolecular green fluorescent protein (GFP)-based fluorescence resonance energy transfer (FRET) construct, in which III3 was flanked by two GFP variants (III3-FRET). Anastellin bound to III3-FRET and caused an increase in the FRET signal. The dissociation constant was estimated to be approximately 210 nM. The binding kinetics of anastellin to III3-FRET fit a first-order reaction with a half-time of approximately 30 s; the kinetics with destabilized III3 mutants were even faster. Matrix-assisted laser desorption ionization-time-of-flight (MALDI-TOF) mass spectrometry suggested that the middle part of III3 became destabilized and protease sensitive upon anastellin binding. Thus, the stability of III3 seems to be a key factor in anastellin binding.

A novel fibronectin binding motif in MSCRAMMs targets F3 modules

Background

BBK32 is a surface expressed lipoprotein and fibronectin (Fn)-binding microbial surface component recognizing adhesive matrix molecule (MSCRAMM) of Borrelia burgdorferi, the causative agent of Lyme disease. Previous studies from our group showed that BBK32 is a virulence factor in experimental Lyme disease and located the Fn-binding region to residues 21–205 of the lipoprotein.

Methodology/Principal Findings

Studies aimed at identifying interacting sites between BBK32 and Fn revealed an interaction between the MSCRAMM and the Fn F3 modules. Further analysis of this interaction showed that BBK32 can cause the aggregation of human plasma Fn in a similar concentration-dependent manner to that of anastellin, the superfibronectin (sFn) inducing agent. The resulting Fn aggregates are conformationally distinct from plasma Fn as indicated by a change in available thermolysin cleavage sites. Recombinant BBK32 and anastellin affect the structure of Fn matrices formed by cultured fibroblasts and inhibit endothelial cell proliferation similarly. Within BBK32, we have located the sFn-forming activity to a region between residues 160 and 175 which contains two sequence motifs that are also found in anastellin. Synthetic peptides mimicking these motifs induce Fn aggregation, whereas a peptide with a scrambled sequence motif was inactive, suggesting that these motifs represent the sFn-inducing sequence.

Conclusions/Significance

We conclude that BBK32 induces the formation of Fn aggregates that are indistinguishable from those formed by anastellin. The results of this study provide evidence for how bacteria can target host proteins to manipulate host cell activities.

Simple method for production of randomized human tenth fibronectin domain III libraries for use in combinatorial screening procedures

Challenges such as the rapid development of detection reagents for emerging or engineered pathogens, the goal of identifying probes for every protein in the human proteome, and the development of therapeutic molecules require systems for development of epitope binding molecules that are faster and cheaper than conventional antibody development. To be practical and effective, antibody mimics must be small, stable molecules that contain exposed loops or surfaces that can be randomized and screened using selective combinatorial assays. The tenth human fibronectin type III domain (10Fn3) fits these requirements and has recently been developed as an antibody mimic for use in detection and therapeutic platforms. Previously described systems for working with 10Fn3 used PCR-based approaches to anneal multiple oligonucleotides to generate randomized 10Fn3 libraries. Here we describe a simplified approach for creating randomized 10Fn3 libraries and report the first use of a T7-based phage display system for screening these libraries.

Population of On-pathway Intermediates in the Folding of Ubiquitin

The role that intermediate states play in protein folding is the subject of intense investigation and in the case of ubiquitin has been controversial. We present fluorescence-detected kinetic data derived from single and double mixing stopped-flow experiments to show that the F45W mutant of ubiquitin (WT*), a well-studied single-domain protein and most recently regarded as a simple two-state system, folds via on-pathway intermediates. To account for the discrepancy we observe between equilibrium and kinetic stabilities and m-values, we show that the polypeptide chain undergoes rapid collapse to an intermediate whose presence we infer from a fast lag phase in interrupted refolding experiments. Double-jump kinetic experiments identify two direct folding phases that are not associated with slow isomerisation reactions in the unfolded state. These two phases are explained by kinetic partitioning which allows molecules to reach the native state from the collapsed state via two possible competing routes, which we further examine using two destabilised ubiquitin mutants. Interrupted refolding experiments allow us to observe the formation and decay of an intermediate along one of these pathways. A plausible model for the folding pathway of ubiquitin is presented that demonstrates that obligatory intermediates and/or chain collapse are important events in restricting the conformational search for the native state of ubiquitin.

Elements in the C terminus of apolipoprotein [a] responsible for the binding to the tenth type III module of human fibronectin

In previous studies, we showed that the C-terminal domain, F2, but not the N-terminal domain, F1, is responsible for the binding of apolipoprotein [a] (apo[a]) to human fibronectin (Fn). To pursue those observations, we prepared, by both elastase digestion and recombinant technology, subsets of F2 of a different length containing either kringle (K) V or the protease domain (PD). We also studied rhesus monkey apo[a], which is known to contain PD but not KV. In the case of Fn, we used both an intact product and its tenth type III module (10FN-III) expressed in Escherichia coli. The binding studies carried out on microtiter plates showed that the affinity of F2 for immobilized 10FN-III was approximately 6-fold higher than that for Fn (dissociation constants = 1.75 +/- 0.31 nM and 10.25 +/- 1.62 nM, respectively). The binding was also exhibited by rhesus apo[a] and by an F2 subset containing the PD linked to an upstream microdomain comprising KIV-8 to KIV-10 and KV, inactive by itself. Competition experiments on microtiter plates showed that both Fn and 10FN-III, when in solution, are incompetent to bind F2. Together, our results indicate that F2 binds to immobilized 10FN-III more efficiently than whole Fn and that the binding can be sustained by truncated forms of F2 that contain the catalytically inactive PD linked to an upstream four K microdomain.

Domain Unfolding Plays a Role in Superfibronectin Formation

Superfibronectin (sFN) is a fibronectin (FN) aggregate that is formed by mixing FN with anastellin, a fragment of the first type III domain of FN. However, the mechanism of this aggregation has not been clear. In this study, we found that anastellin co-precipitated with FN in a ratio of approximately 4:1, anastellin:FN monomer. The primary binding site for anastellin was in the segment (III)1-3, which bound three molecules of anastellin and was able to form a precipitate without the rest of the FN molecule. Anastellin binding to (III)3 caused a conformational change in that domain that exposed a cryptic thermolysin-sensitive site. An additional anastellin binds to (III)11, where it enhances thermolysin digestion of (III)11. An engineered disulfide bond in (III)3 inhibited both aggregation and protease digestion, suggesting that the stability of (III)3 is a key factor in sFN formation. We propose a three-step model for sFN formation: 1) FN-III domains spontaneously unfold and refold; 2) anastellin binds to an unfolded domain, preventing its refolding and leaving it with exposed hydrophobic surfaces and beta-sheet edges; and 3) these exposed elements bind to similar exposed elements on other molecules, leading to aggregation. The model is consistent with our observation that the kinetics of aggregation are first order, with a reaction time of 500-700 s. Similar mechanisms may contribute to the assembly of the native FN matrix.

Dual-specificity tyrosine-phosphorylated and regulated kinase 1A (DYRK1A) interacts with the phytanoyl-CoA alpha-hydroxylase associated protein 1 (PAHX-AP1), a brain specific protein

Down syndrome (DS) is the most common genetic defect correlated with mental retardation and delayed development. The specific genes responsible for these phenotypic alterations have not yet been defined. Dyrk1A (dual-specificity tyrosine-phosphorylated and regulated kinase 1A), the human ortholog of the Drosophila minibrain gene (mnb), maps to the Down syndrome critical region of human chromosome 21 and is overexpressed in Down syndrome fetal brain. In Drosophila, minibrain is involved in postembryonic neurogenesis. In human, DYRK1A encodes a serine-threonine kinase but despite its potential involvement in the neurobiological alterations associated with Down syndrome, its physiological function has not yet been defined. To gain some insight into its biological function, we used the yeast two-hybrid approach to identify binding partners of DYRK1A. We found that the C-terminal region of DYRK1A interacts with a brain specific protein, phytanoyl-CoA alpha-hydroxylase-associated protein 1 (PAHX-AP1, also named PHYHIP) which was previously shown to interact with phytanoyl-CoA alpha-hydroxylase (PAHX, also named PHYH), a Refsum disease gene product. This interaction was confirmed by co-immunoprecipitation of PC12 cells co-transfected with DYRK1A and PAHX-AP1. Furthermore, immunofluorescence analysis of PC12 cells co-transfected with both plasmids showed a re-distribution of DYRK1A from the nucleus to the cytoplasm where it co-localized with PAHX-AP1. Finally, in PC12 cells co-transfected with both plasmids, DYRK1A was no longer able to interact with the nuclear transcription factor CREB, thereby confirming that the intracellular localization of DYRK1A was changed from the nucleus to the cytoplasm in the presence of PAHX-AP1. Therefore, these data indicate that by inducing a re-localization of DYRK1A into the cytoplasm, PAHX-AP1 may contribute to new cellular functions of DYRK1A and suggest that PAHX-AP1 may be involved in the development of neurological abnormalities observed in Down syndrome patients.

Molecular Recognition Properties of FN3 Monobodies that Bind the Src SH3 Domain

We have constructed a phage-displayed library based on the human fibronectin tenth type III domain (FN3) scaffold by randomizing residues in its FG and BC loops. Screening against the SH3 domain of human c-Src yielded six different clones. Five of these contained proline-rich sequences in their FG loop that resembled class I (i.e., +xxPxxP) peptide ligands for the Src SH3 domain. The sixth clone lacked the proline-rich sequence and showed particularly high binding specificity to the Src SH3 domain among various SH3 domains tested. Competitive binding, loop replacement, and NMR perturbation experiments were conducted to analyze the recognition properties of selected binders. The strongest binder was able to pull down full-length c-Src from murine fibroblast cell extracts, further demonstrating the potential of this scaffold for use as an antibody mimetic.

Phenotypic expression of the C282Y/Q283P compound heterozygosity in HFE and molecular modeling of the Q283P mutation effect

In Caucasians, from 4 to 35% of hereditary hemochromatosis (HH) patients carry a least one chromosome without a common assigned HFE mutation (i.e., C282Y, H63D, and S65C). We have undertaken a D-HPLC scanning of the HFE coding region in such patients in order to identify uncommon mutations liable to explain their high transferrin saturation level. Twenty HH patients from Brittany carrying at least one chromosome without an assigned mutation were selected on the basis of a transferrin saturation level with the following threshold: > or = 60% in men and > or = 50% in women, in the absence of other known causes of iron disorders. This strategy allowed us to detect a heterozygous sequence variant in exon 4 of the HFE gene from one individual who was also heterozygous for C282Y. Subsequent DNA sequencing analysis identified an adenine to cytosine transversion at position 848 which changes amino acid 283 from glutamine to proline (Q283P). Family study revealed a clear association between the C282Y/Q283P compound heterozygote genotype and the development of HH. Molecular modeling studies are in favor of a destabilizing effect of the Q283P mutation on the tertiary structure of the HFE protein. This is the first report of a natural protein variant describing the introduction of a proline in a central beta-strand position. Our approach may have practical implications in screening strategies for hereditary hemochromatosis, molecular diagnosis, and HFE structure-function relationships.

Novel mutant human fibronectin FIII9-10 domain pair with increased conformational stability and biological activity

The ninth and tenth type III domains (FIII9-10) in the central cell binding domain of human fibronectin contain integrin receptor binding sites, including RGD in FIII10 and a synergy site, PHSRN, in FIII9. The specific amino acids that contribute to cell binding have been identified by the use of wild-type and mutant fragments of human fibronectin containing the FIII9-10 domain pair. At high concentrations FIII9-10 mimics, to a large extent, the biological activity of the full-length fibronectin molecule. However, FIII9 is conformationally unstable, even in the context of the FIII9-10 pair. Here we report the construction of a series of hybrid mouse-human FIII9-10 pairs that confer varying degrees of conformational stability to FIII9. The conformational stability of the human FIII9 module was increased 2-3-fold by substitution of Leu1408 with Pro. We demonstrate that the biological activity of this mutant is enhanced. The resulting FIII9-10 mutant has good solution properties and will provide a template into which further mutations can be incorporated in order to probe the structure-function relationship of the cell binding module of fibronectin.

Directed evolution of high-affinity antibody mimics using mRNA display

We constructed a library of >10(12) unique, covalently coupled mRNA-protein molecules by randomizing three exposed loops of an immunoglobulin-like protein, the tenth fibronectin type III domain (10Fn3). The antibody mimics that bound TNF-alpha were isolated from the library using mRNA display. Ten rounds of selection produced 10Fn3 variants that bound TNF-alpha with dissociation constants (K(d)) between 1 and 24 nM. After affinity maturation, the lowest K(d) measured was 20 pM. Selected antibody mimics were shown to capture TNF-alpha when immobilized in a protein microarray. 10Fn3-based scaffold libraries and mRNA-display allow the isolation of high-affinity, specific antigen binding proteins; potential applications of such binding proteins include diagnostic protein microarrays and protein therapeutics.

Conserved and nonconserved features of the folding pathway of hisactophilin, a beta-trefoil protein

Based on previous studies of interleukin-1beta (IL-1beta) and both acidic and basic fibroblast growth factors (FGFs), it has been suggested that the folding of beta-trefoil proteins is intrinsically slow and may occur via the formation of essential intermediates. Using optical and NMR-detected quenched-flow hydrogen/deuterium exchange methods, we have measured the folding kinetics of hisactophilin, another beta-trefoil protein that has < 10% sequence identity and unrelated function to IL-1beta and FGFs. We find that hisactophilin can fold rapidly and with apparently two-state kinetics, except under the most stabilizing conditions investigated where there is evidence for formation of a folding intermediate. The hisactophilin intermediate has significant structural similarities to the IL-1beta intermediate that has been observed experimentally and predicted theoretically using a simple, topology-based folding model; however, it appears to be different from the folding intermediate observed experimentally for acidic FGF. For hisactophilin and acidic FGF, intermediates are much less prominent during folding than for IL-1beta. Considering the structures of the different beta-trefoil proteins, it appears that differences in nonconserved loops and hydrophobic interactions may play an important role in differential stabilization of the intermediates for these proteins.

Probing protein conformational changes in living cells by using designer binding proteins: application to the estrogen receptor

A challenge in understanding the mechanism of protein function in biology is to establish the correlation between functional form in the intracellular environment and high-resolution structures obtained with in vitro techniques. Here we present a strategy to probe conformational changes of proteins inside cells. Our method involves: (i) engineering binding proteins to different conformations of a target protein, and (ii) using them to sense changes in the surface property of the target in cells. We probed ligand-induced conformational changes of the estrogen receptor alpha (ER alpha) ligand-binding domain (LBD). By using yeast two-hybrid techniques, we first performed combinatorial library screening of "monobodies" (small antibody mimics using the scaffold of a fibronectin type III domain) for clones that bind to ER alpha and then characterized their interactions with ER alpha in the nucleus, the native environment of ER alpha, in the presence of various ligands. A library using a highly flexible loop yielded monobodies that specifically recognize a particular ligand complex of ER alpha, and the pattern of monobody specificity was consistent with the structural differences found in known crystal structures of ER alpha-LBD. A more restrained loop library yielded clones that bind both agonist- and antagonist-bound ER alpha. Furthermore, we found that a deletion of the ER alpha F domain that is C-terminally adjacent to the LBD increased the crossreactivity of monobodies to the apo-ER alpha-LBD, suggesting a dynamic nature of the ER alpha-LBD conformation and a role of the F domain in restraining the LBD in an inactive conformation.

Solution structure of the fibronectin type III domain from Bacillus circulans WL-12 chitinase A1

Growing evidence suggests that horizontal gene transfer plays an integral role in the evolution of bacterial genomes. One of the debated examples of horizontal gene transfer from animal to prokaryote is the fibronectin type III domain (FnIIID). Certain extracellular proteins of soil bacteria contain an unusual cluster of FnIIIDs, which show sequence similarity to those of animals and are likely to have been acquired horizontally from animals. Here we report the solution structure of the FnIIID of chitinase A1 from Bacillus circulans WL-12. To the best of our knowledge, this is the first tertiary structure to be reported for an FnIIID from a bacterial protein. The structure of the domain shows significant similarity to FnIIIDs from animal proteins. Sequence comparisons with FnIIIDs from other soil bacteria proteins show that the core-forming residues are highly conserved and, thus, are under strong evolutionary pressure. Striking similarities in the tertiary structures of bacterial FnIIIDs and their mammalian counterparts may support the hypothesis that the evolution of the FnIIID in bacterial carbohydrases occurred horizontally. The total lack of surface-exposed aromatic residues also suggests that the role of this FnIIID is different from those of other bacterial beta-sandwich domains, which function as carbohydrate-binding modules.

The alternatively spliced domain TnFnIII A1A2 of the extracellular matrix protein tenascin-C suppresses activation-induced T lymphocyte proliferation and cytokine production

Several lines of evidences have suggested that T cell activation could be impaired in the tumor environment, a condition referred to as tumor-induced immunosuppression. We have previously shown that tenascin-C, an extracellular matrix protein highly expressed in the tumor stroma, inhibits T lymphocyte activation in vitro, raising the possibility that this molecule might contribute to tumor-induced immunosuppression in vivo. However, the region of the protein mediating this effect has remained elusive. Here we report the identification of the minimal region of tenascin-C that can inhibit T cell activation. Recombinant fragments corresponding to defined regions of the molecule were tested for their ability to inhibit in vitro activation of human peripheral blood T cells induced by anti-CD3 mAbs in combination with fibronectin or IL-2. A recombinant protein encompassing the alternatively spliced fibronectin type III domains of tenascin-C (TnFnIII A-D) vigorously inhibited both early and late lymphocyte activation events including activation-induced TCR/CD8 down-modulation, cytokine production, and DNA synthesis. In agreement with this, full length recombinant tenascin-C containing the alternatively spliced region suppressed T cell activation, whereas tenascin-C lacking this region did not. Using a series of smaller fragments and deletion mutants issued from this region, we have identified the TnFnIII A1A2 domain as the minimal region suppressing T cell activation. Single TnFnIII A1 or A2 domains were no longer inhibitory, while maximal inhibition required the presence of the TnFnIII A3 domain. Altogether, these data demonstrate that the TnFnIII A1A2 domain mediate the ability of tenascin-C to inhibit in vitro T cell activation and provide insights into the immunosuppressive activity of tenascin-C in vivo.

A partially folded intermediate species of the beta-sheet protein apo-pseudoazurin is trapped during proline-limited folding

The folding of apo-pseudoazurin, a 123-residue, predominantly beta-sheet protein with a complex Greek key topology, has been investigated using several biophysical techniques. Kinetic analysis of refolding using far- and near-ultraviolet circular dichroism (UV CD) shows that the protein folds slowly to the native state with rate constants of 0.04 and 0.03 min(-1), respectively, at pH 7.0 and at 15 degrees C. This process has an activation enthalpy of approximately 90 kJ/mole and is catalyzed by cyclophilin A, indicating that folding is limited by trans-cis proline isomerization, presumably around the Xaa-Pro 20 bond that is in the cis isomer in the native state. Before proline isomerization, an intermediate accumulates during folding. This species has a substantial signal in the far-UV CD, a nonnative signal in the near-UV CD, exposed hydrophobic surfaces (judged by 1-anilino naphthalenesulphonate binding), a noncooperative denaturation transition, and a dynamic structure (revealed by line broadening on the nuclear magnetic resonance time scale). We compare the properties of this intermediate with partially folded states of other proteins and discuss its role in folding of this complex Greek key protein.

Simulated refolding of stretched titin immunoglobulin domains

Steered molecular dynamics (SMD) is used to investigate forced unfolding and spontaneous refolding of immunoglobulin I27, a domain of the muscle protein titin. Previous SMD simulations revealed the events leading to stretch-induced unfolding of I27, the rupture of hydrogen bonds bridging beta-strands A and B, and those bridging beta-strands A' and G, the latter rupture occurring at an extension of approximately 15 A and preceding the complete unfolding. Simulations are now used to study the refolding of partially unfolded I27 domains. The results reveal that stretched domains with ruptured interstrand hydrogen bonds shrink along the extension direction. Two types of refolding patterns are recognized: for separated beta-strands A' and G, in most simulations five of the six hydrogen bonds between A' and G stably reformed in 2 ns, whereas for separated beta-strands A and B hydrogen bonds seldom reformed in eight 2-ns simulations. The mechanical stability of the partially refolded intermediates has been tested by re-stretching.

Flexibility and extensibility in the titin molecule: analysis of electron microscope data

Muscle elasticity derives directly from titin extensibility, which stems from three distinct types of spring-like behaviour of the I-band portion of the molecule. With progressively greater forces and sarcomere lengths, the molecule straightens and then unfolds, first in the PEVK-region and then in individual immunoglobulin domains. Here, we report quantitative analysis of flexibility and extensibility in isolated titin molecules visualized by electron microscopy. Conformations displayed by molecules dried on a substrate vary from a random coil to rod-like, demonstrating highly flexible and easily deformable tertiary structure. The particular conformation observed depends on the "wettability" of the substrate during specimen preparation: higher wettability favours coiled conformations, whereas lower wettability results in more extended molecules. Extension is shown to occur during liquid dewetting. Statistical methods of conformational analysis applied to a population of coiled molecules gave an average persistence length 13.5(+/-4.5) nm. The close correspondence of this value to an earlier one from light-scattering studies confirms that conformations observed by microscopy closely reflected the equilibrium conformation in solution. Analysis of hydrodynamic forces exerted during dewetting also indicates that the force causing straightening of the molecules and extension of the PEVK-region is in the picoNewton range, whereas unfolding of the immunoglobulin and fibronectin domains may require forces about tenfold higher. The microscope data directly illustrate the relationship between titin conformation and the magnitude of applied force. They also suggest the presence of torsional stiffness in the molecule, which may affect considerations of elasticity.

Proline residues in transmembrane alpha helices affect the folding of bacteriorhodopsin

Proline residues occur frequently in transmembrane alpha helices, which contrasts with their behaviour as helix-breakers in water-soluble proteins. The three membrane-embedded proline residues of bacteriorhodopsin have been replaced individually by alanine and glycine to give P50A, or P50G on helix B, P91A, or P91G on helix C, and P186A or P186G on helix F, and the effect on the protein folding kinetics has been investigated. The rate-limiting apoprotein folding step, which results in formation of a seven transmembrane, alpha helical state, was slower than wild-type protein for the Pro50 and Pro91 mutants, regardless of whether they were mutated to Ala or Gly. These proline residues give rise to several inter-helix contacts, which are therefore important in folding to the seven transmembrane helix state. No evidence for cis-trans isomerisations of the peptidyl prolyl bonds was found during this rate-limiting apoprotein folding step. Mutations of all three membrane-embedded proline residues affected the subsequent retinal binding and final folding to bacteriorhodopsin, suggesting that these proline residues contribute to formation of the retinal binding pocket within the helix bundle, again via helix/helix interactions. These results point to proline residues in transmembrane alpha helices being important in the folding of integral membrane proteins. The helix/helix interactions and hydrogen bonds that arise from the presence of proline residues in transmembrane alpha helices can affect the formation of transmembrane alpha helix bundles as well as cofactor binding pockets.

Unfolding of titin domains explains the viscoelastic behavior of skeletal myofibrils

The elastic section of the giant muscle protein titin contains many immunoglobulin-like domains, which have been shown by single-molecule mechanical studies to unfold and refold upon stretch-release. Here we asked whether the mechanical properties of Ig domains and/or other titin regions could be responsible for the viscoelasticity of nonactivated skeletal-muscle sarcomeres, particularly for stress relaxation and force hysteresis. We show that isolated psoas myofibrils respond to a stretch-hold protocol with a characteristic force decay that becomes more pronounced following stretch to above 2.6-microm sarcomere length. The force decay was readily reproducible by a Monte Carlo simulation taking into account both the kinetics of Ig-domain unfolding and the worm-like-chain model of entropic elasticity used to describe titin's elastic behavior. The modeling indicated that the force decay is explainable by the unfolding of only a very small number of Ig domains per titin molecule. The simulation also predicted that a unique sequence in titin, the PEVK domain, may undergo minor structural changes during sarcomere extension. Myofibrils subjected to 1-Hz cycles of stretch-release exhibited distinct hysteresis that persisted during repetitive measurements. Quick stretch-release protocols, in which variable pauses were introduced after the release, revealed a two-exponential time course of hysteresis recovery. The rate constants of recovery compared well with the refolding rates of Ig-like or fibronectin-like domains measured by single-protein mechanical analysis. These findings suggest that in the sarcomere, titin's Ig-domain regions may act as entropic springs capable of adjusting their contour length in response to a stretch.

Unfolding forces of titin and fibronectin domains directly measured by AFM

AFM-based Single Molecule Force Spectroscopy provides a new tool for probing the mechanical properties of single molecules. In this chapter we show that the unfolding forces of single protein domains can be directly measured. Unfolding forces give new insight into protein stability that cannot be deduced from thermodynamic measurements. A comparison between the unfolding forces measured in Ig domains of the muscle protein titin and those measured in fibronectin Type III domains reveals an extraordinarily high stability of titin domains.

Functional dissection of the major structural protein of bluetongue virus: identification of key residues within VP7 essential for capsid assembly

A lattice of VP7 trimers forms the surface of the icosahedral bluetongue virus (BTV) core. To investigate the role of VP7 oligomerization in core assembly, a series of residues for substitution were predicted based on crystal structures of BTV type 10 VP7 molecule targeting the monomer-monomer contacts within the trimer. Seven site-specific substitution mutations of VP7 have been created using cDNA clones and were employed to produce seven recombinant baculoviruses. The effects of these mutations on VP7 solubility, ability to trimerize and formation of core-like particles (CLPs) in the presence of the scaffolding VP3 protein, were investigated. Of the seven VP7 mutants examined, three severely affected the stability of CLP, while two other mutants had lesser effect on CLP stability. Only one mutant had no apparent effect on the formation of the stable capsid. One mutant in which the conserved tyrosine at residue 271 (lower domain helix 6) was replaced by arginine formed insoluble aggregates, implying an effect in the folding of the molecule despite the prediction that such a change would be accommodated. All six soluble VP7 mutants were purified, and their ability to trimerize was examined. All mutants, including those that did not form stable CLPs, assembled into stable trimers, implying that single substitution may not be sufficient to perturb the complex monomer-monomer contacts, although subtle changes within the VP7 trimer could destabilize the core. The study highlights some of the key residues that are crucial for BTV core assembly and illustrates how the structure of VP7 in isolation underrepresents the dynamic nature of the assembly process at the biological level.

Comparison of folding rates of homologous prokaryotic and eukaryotic proteins

The rate of polypeptide chain elongation is up to one order of magnitude faster in prokaryotic cells than in eukaryotes. Here we report that the rates of in vitro refolding of orthologous prokaryotic and eukaryotic proteins correlate with their differential rates of biosynthesis. The mitochondrial and cytosolic aspartate aminotransferases of chicken and aspartate aminotransferase of Escherichia coli show pairwise sequence identities of 41-48% and nearly identical three-dimensional structures. Nevertheless, the prokaryotic enzyme refolded 6 times faster (at 25 degrees C) than the eukaryotic isoenzymes after denaturation in 6 m guanidine hydrochloride. Prokaryotic malate dehydrogenase and lactate dehydrogenase also renatured faster than their orthologous eukaryotic counterparts, suggesting that evolutionary pressure has adapted the rate of folding to the rate of elongation of polypeptide chains.

The folding of an immunoglobulin-like Greek key protein is defined by a common-core nucleus and regions constrained by topology

TNfn3, the third fibronectin type III domain of human tenascin, is an immunoglobulin-like protein that is a good model for experimental and theoretical analyses of Greek key folding. The third fibronectin type III domain of human tenascin folds and unfolds in a two-state fashion over a range of temperature and pH values, and in the presence of stabilising salts. Here, we present a high resolution protein engineering analysis of the single rate determining transition state. The 48 mutations report on the contribution of side-chains at 32 sites in the core and loop regions. Three areas in the protein exhibit high Phi-values, indicating that they are partially structured in the transition state. First, a common-core ring of four positions in the central strands B, C, E and F, that are in close contact, form a nucleus of tertiary interactions. The two other regions that appear well-formed are the C' region and the E-F loop. The Phi-values gradually decrease away from these regions such that the very ends of the two terminal strands A and G, have Phi-values of zero. We propose a model for the folding of immunoglobulin-like proteins in which the common-core "ring" forms the nucleus for folding, whilst the C' and E-F regions are constrained by topology to pack early. Folding characteristics of a group of structurally related proteins appear to support this model.

Conservation of folding and stability within a protein family: the tyrosine corner as an evolutionary cul-de-sac

What are the selective pressures on protein sequences during evolution? Amino acid residues may be highly conserved for functional or structural (stability) reasons. Theoretical studies have proposed that residues involved in the folding nucleus may also be highly conserved. To test this we are using an experimental "fold approach" to the study of protein folding. This compares the folding and stability of a number of proteins that share the same fold, but have no common amino acid sequence or biological activity. The fold selected for this study is the immunoglobulin-like beta-sandwich fold, which is a fold that has no specifically conserved function. Four model proteins are used from two distinct superfamilies that share the immunoglobulin-like fold, the fibronectin type III and immunoglobulin superfamilies. Here, the fold approach and protein engineering are used to question the role of a highly conserved tyrosine in the "tyrosine corner" motif that is found ubiquitously and exclusively in Greek key proteins. In the four model beta-sandwich proteins characterised here, the tyrosine is the only residue that is absolutely conserved at equivalent sites. By mutating this position to phenylalanine, we show that the tyrosine hydroxyl is not required to nucleate folding in the immunoglobulin superfamily, whereas it is involved to some extent in early structure formation in the fibronectin type III superfamily. The tyrosine corner is important for stability, mutation to phenylalanine costs between 1.5 and 3 kcal mol(-1). We propose that the high level of conservation of the tyrosine is related to the structural restraints of the loop connecting the beta-sheets, representing an evolutionary "cul-de-sac".

Folding of beta-sandwich proteins: three-state transition of a fibronectin type III module

An analysis of the folding of the 94 residue tenth fibronectin type III (fnIII) domain of human fibronectin (FNfn10) is presented. Use of guanidine isothiocyanate as a denaturant allows us to obtain equilibrium and kinetic data across a broad range of denaturant concentrations that are unavailable in guanidine hydrochloride. Equilibrium unfolding experiments show that FNfn10 is significantly more stable than has been reported previously. Comparison of equilibrium and kinetic parameters reveals the presence of an intermediate that accumulates at low denaturant concentrations. This is the first demonstration of three-state folding kinetics for a fnIII domain. We have previously shown that a homologous domain from human tenascin (TNfn3) folds by a two-state mechanism, but this does not necessarily indicate that the two proteins fold by different folding pathways.

FXY2/MID2, a gene related to the X-linked Opitz syndrome gene FXY/MID1, maps to Xq22 and encodes a FNIII domain-containing protein that associates with microtubules

Opitz G/BBB syndrome (OS) is a genetically heterogeneous disorder with an X-linked locus and an autosomal locus linked to 22q11.2. OS affects multiple organ systems with often variable severity even between siblings. The clinical features, which include hypertelorism, cleft lip and palate, defects of cardiac septation, hypospadias, and anorectal anomalies, indicate an underlying disturbance of the developing ventral midline of the embryo. The gene responsible for X-linked OS, FXY/MID1, is located on the short arm of the human X chromosome within Xp22.3 and encodes a protein with both an RBCC (RING finger, B-box, coiled coil) and a B30.2 domain. The Fxy gene in mice is also located on the X chromosome but spans the pseudoautosomal boundary in this species. Here we describe a gene closely related to FXY/MID1, called FXY2, which also maps to the X chromosome within Xq22. The mouse Fxy2 gene is located on the distal part of the mouse X chromosome within a region syntenic to Xq22. Analysis of genes flanking both FXY/MID1 and FXY2 (as well as their counterparts in mouse) suggests that these regions may have arisen as a result of an intrachromosomal duplication on an ancestral X chromosome. We have also identified in both FXY2 and FXY/MID1 proteins a conserved fibronectin type III domain located between the RBCC and B30.2 domains that has implications for understanding protein function. The FXY/MID1 protein has previously been shown to colocalize with microtubules, and here we show that the FXY2 protein similarly associates with microtubules in a manner that is dependent on the carboxy-terminal B30.2 domain.

Folding studies of immunoglobulin-like beta-sandwich proteins suggest that they share a common folding pathway

BACKGROUND

Are folding pathways conserved in protein families? To test this explicitly and ask to what extent structure specifies folding pathways requires comparison of proteins with a common fold. Our strategy is to choose members of a highly diverse protein family with no conservation of function and little or no sequence identity, but with structures that are essentially the same. The immunoglobulin-like fold is one of the most common structural families, and is subdivided into superfamilies with no detectable evolutionary or functional relationship.

RESULTS

We compared the folding of a number of immunoglobulin-like proteins that have a common structural core and found a strong correlation between folding rate and stability. The results suggest that the folding pathways of these immunoglobulin-like proteins share common features.

CONCLUSIONS

This study is the first to compare the folding of structurally related proteins that are members of different superfamilies. The most likely explanation for the results is that interactions that are important in defining the structure of immunoglobulin-like proteins are also used to guide folding.

Universally conserved positions in protein folds: reading evolutionary signals about stability, folding kinetics and function

Here, we provide an analysis of molecular evolution of five of the most populated protein folds: immunoglobulin fold, oligonucleotide-binding fold, Rossman fold, alpha/beta plait, and TIM barrels. In order to distinguish between "historic", functional and structural reasons for amino acid conservations, we consider proteins that acquire the same fold and have no evident sequence homology. For each fold we identify positions that are conserved within each individual family and coincide when non-homologous proteins are structurally superimposed. As a baseline for statistical assessment we use the conservatism expected based on the solvent accessibility. The analysis is based on a new concept of "conservatism-of-conservatism". This approach allows us to identify the structural features that are stabilized in all proteins having a given fold, despite the fact that actual interactions that provide such stabilization may vary from protein to protein. Comparison with experimental data on thermodynamics, folding kinetics and function of the proteins reveals that such universally conserved clusters correspond to either: (i) super-sites (common location of active site in proteins having common tertiary structures but not function) or (ii) folding nuclei whose stability is an important determinant of folding rate, or both (in the case of Rossman fold). The analysis also helps to clarify the relation between folding and function that is apparent for some folds.

Pseudo-prolines: induction of cis/trans-conformational interconversion by decreased transition state barriers

Molecular events such as cis/trans isomerization of Xaa-Pro tertiary amide bonds in peptides and proteins are slow on the overall time scale of the formation of a final biostructure and are, therefore, rate limiting. In order to pursue a better understanding of the molecular events underlying such slow interconversions, we applied the recently introduced pseudo-proline (PsiPro) concept as a tool to study the dynamics of Xaa-Pro bonds by determining the kinetics and thermodynamics of cis/trans isomerism. We show that enhanced isomerization rates of tertiary amide bonds prior to a PsiPro unit in short model peptides is due to lowered transition state barriers. In addition, pronounced effects upon the dynamics of the reversible transition between helix I and II of oligoprolines containing one or several PsiPro units were observed.

Mechanical and chemical unfolding of a single protein: a comparison

Is the mechanical unraveling of protein domains by atomic force microscopy (AFM) just a technological feat or a true measurement of their unfolding? By engineering a protein made of tandem repeats of identical Ig modules, we were able to get explicit AFM data on the unfolding rate of a single protein domain that can be accurately extrapolated to zero force. We compare this with chemical unfolding rates for untethered modules extrapolated to 0 M denaturant. The unfolding rates obtained by the two methods are the same. Furthermore, the transition state for unfolding appears at the same position on the folding pathway when assessed by either method. These results indicate that mechanical unfolding of a single protein by AFM does indeed reflect the same event that is observed in traditional unfolding experiments. The way is now open for the extensive use of AFM to measure folding reactions at the single-molecule level. Single-molecule AFM recordings have the added advantage that they define the reaction coordinate and expose rare unfolding events that cannot be observed in the absence of chemical denaturants.

Stretching lattice models of protein folding

A new class of experiments that probe folding of individual protein domains uses mechanical stretching to cause the transition. We show how stretching forces can be incorporated in lattice models of folding. For fast folding proteins, the analysis suggests a complex relation between the force dependence and the reaction coordinate for folding.

Proline isomerization is unlikely to be the cause of slow annealing and reactivation during the folding of alkaline phosphatase

The in vitro folding of Escherichia coli alkaline phosphatase (AP) from the guanidine hydrochloride (GdnHCl) denatured state is characterized by a significant slow phase in the post activational recovery of native protein lability (probed by the susceptibility to GdnHCl denaturation and occurring on the time scale of days) as well as a slow phase in the recovery of activity (on the time scale of minutes). Slow folding events have often been attributed to cis-trans isomerizations of X-Pro peptide bonds, a plausible explanation for AP, which contains 21 prolines per subunit. To investigate the role of proline isomerization in the two measures of refolding mentioned above, we have performed "double-jump" GdnHCl denaturation/renaturation experiments, with a third jump, where the rate of unfolding of refolded protein upon exposure to denaturant was added to assess the rate of change of lability. Our measurements of the time evolution of both the lability and the reactivation of refolded AP as a function of denaturation time show that proline isomerization is unlikely to be the cause of either of these slow events in the refolding of AP. The conclusions are further confirmed by the absence of proline isomerization effects when AP is refolded in the presence of human and periplasmic E. coli peptidyl-prolyl isomerase.

Forced unfolding of the fibronectin type III module reveals a tensile molecular recognition switch

The 10th type III module of fibronectin possesses a beta-sandwich structure consisting of seven beta-strands (A-G) that are arranged in two antiparallel sheets. It mediates cell adhesion to surfaces via its integrin binding motif, Arg78, Gly79, and Asp80 (RGD), which is placed at the apex of the loop connecting beta-strands F and G. Steered molecular dynamics simulations in which tension is applied to the protein's terminal ends reveal that the beta-strand G is the first to break away from the module on forced unfolding whereas the remaining fold maintains its structural integrity. The separation of strand G from the remaining fold results in a gradual shortening of the distance between the apex of the RGD-containing loop and the module surface, which potentially reduces the loop's accessibility to surface-bound integrins. The shortening is followed by a straightening of the RGD-loop from a tight beta-turn into a linear conformation, which suggests a further decrease of affinity and selectivity to integrins. The RGD-loop therefore is located strategically to undergo strong conformational changes in the early stretching stages of the module and thus constitutes a mechanosensitive control of ligand recognition.

The fibronectin type III domain as a scaffold for novel binding proteins

The fibronectin type III domain (FN3) is a small autonomous folding unit which occurs in many animal proteins involving in ligand binding. The beta-sandwich structure of FN3 closely resembles that of immunoglobulin domains. We have prepared a phage display library of FN3 in which residues in two surface loops were randomized. We have selected mutant FN3s which bind to a test ligand, ubiquitin, with significant affinities, while the wild-type FN3 shows no measurable affinity. A dominant clone was expressed as a soluble protein and its properties were investigated in detail. Heteronuclear NMR characterization revealed that the selected mutant protein retains the global fold of FN3. It also has a modest conformational stability despite mutations at 12 out of 94 residues. These results clearly show the potential of FN3 as a scaffold for engineering novel binding proteins.

Obligatory steps in protein folding and the conformational diversity of the transition state

We have analyzed the existence of obligatory steps in the folding reaction of the alpha-spectrin SH3 domain by mutating Asp 48 (D48G), which is at position i+3 of an isolated two-residue type II' beta-turn. Calorimetry and X-ray analysis show an entropic stabilizing effect resulting from local changes at the dihedral angles of the beta-turn. Kinetic analysis of D48G shows that this beta-turn is fully formed in the transition state, while there is no evidence of its formation in an isolated fragment. Introduction of several mutations in the D48G protein reveals that the local stabilization has not significantly altered the transition state ensemble. All these results, together with previous analysis of other alpha-spectrin and src SH3 mutants, indicate that: (i) in the folding reaction there could be obligatory steps which are not necessarily part of the folding nucleus; (ii) transition state ensembles in beta-sheet proteins could be quite defined and conformationally restricted ('mechanic folding nucleus'); and (iii) transition state ensembles in some proteins could be evolutionarily conserved.

Formation of amyloid-like fibrils by self-association of a partially unfolded fibronectin type III module

The ninth type III module of murine fibronectin was expressed in E. coli and folded into a compact homogeneous monomer whose unfolding and refolding were then investigated by fluorescence, circular dichroism, calorimetry and electron microscopy. The isolated module is unusually labile under physiological conditions. When heated at 1 deg. C/minute it exhibits an irreversible endothermic transition between 35 and 42 degrees C depending on the protein concentration. The transition is accompanied by changes in secondary and tertiary structure with partial exposure of the single tryptophan and increased binding of the hydrophobic probe, 1,8-anilinonaphthalene-sulfonate. The partially unfolded intermediate undergoes rapid self-association leading to the formation of large stable multimers that, like the original monomer, contain substantial amounts of beta sheet structure. The multimers melt and dissociate reversibly in a second endothermic transition between 60 and 90 degrees C also depending on the protein concentration. This second transition destroys the remaining secondary structure and further exposes the tryptophan. Visualization of negatively stained specimens in the electron microscope reveals that partially unfolded rmIII-9 slowly forms amyloid-like fibrils of approximately 10 nm width and indeterminate length. A subdomain swapping mechanism is proposed in which beta strands from one partially unfolded molecule interact with complementary regions of another to form oligomers and polymers. The possibility that similar interactions could play a role in the formation of fibrils by fibronectin in vivo is discussed.