Identification of the functionally relevant calmodulin binding site in smooth muscle caldesmon

Amino acid mutations in the caldesmon COOH-terminal functional domain increase force generation in bladder smooth muscle

Caldesmon (CaD), a component of smooth muscle thin filaments, binds actin, tropomyosin, calmodulin, and myosin and inhibits actin-activated ATP hydrolysis by smooth muscle myosin. Internal deletions of the chicken CaD functional domain that spans from amino acids (aa) 718 to 731, which corresponds to aa 512-530 including the adjacent aa sequence in mouse CaD, lead to diminished CaD-induced inhibition of actin-activated ATP hydrolysis by myosin. Transgenic mice with mutations of five aa residues (Lys(523) to Gln, Val(524) to Leu, Ser(526) to Thr, Pro(527) to Cys, and Lys(529) to Ser), which encompass the ATPase inhibitory determinants located in exon 12, were generated by homologous recombination. Homozygous (-/-) animals did not develop, but heterozygous (+/-) mice carrying the expected mutations in the CaD ATPase inhibitory domain (CaD mutant) matured and reproduced normally. The peak force produced in response to KCl and electrical field stimulation by the detrusor smooth muscle from the CaD mutant was high compared with that of the wild type. CaD mutant mice revealed nonvoiding contractions during bladder filling on awake cystometry, suggesting that the CaD ATPase inhibitory domain suppresses force generation during the filling phase and this suppression is partially released by mutations in 50% of CaD in heterozygous. Our data show for the first time a functional phenotype, at the intact smooth muscle tissue and in vivo organ levels, following mutation of a functional domain at the COOH-terminal region of CaD.

Modes of Caldesmon Binding to Actin

Smooth muscle caldesmon binds actin and inhibits actomyosin ATPase activity. Phosphorylation of caldesmon by extracellular signal-regulated kinase (ERK) reverses this inhibitory effect and weakens actin binding. To better understand this function, we have examined the phosphorylation-dependent contact sites of caldesmon on actin by low dose electron microscopy and three-dimensional reconstruction of actin filaments decorated with a C-terminal fragment, hH32K, of human caldesmon containing the principal actin-binding domains. Helical reconstruction of negatively stained filaments demonstrated that hH32K is located on the inner portion of actin subdomain 1, traversing its upper surface toward the C-terminal segment of actin, and forms a bridge to the neighboring actin monomer of the adjacent long pitch helical strand by connecting to its subdomain 3. Such lateral binding was supported by cross-linking experiments using a mutant isoform, which was capable of cross-linking actin subunits. Upon ERK phosphorylation, however, the mutant no longer cross-linked actin to polymers. Three-dimensional reconstruction of ERK-phosphorylated hH32K indeed indicated loss of the interstrand connectivity. These results, together with fluorescence quenching data, are consistent with a phosphorylation-dependent conformational change that moves the C-terminal end segment of caldesmon near the phosphorylation site but not the upstream region around Cys(595), away from F-actin, thus neutralizing its inhibitory effect on actomyosin interactions. The binding pattern of hH32K suggests a mechanism by which unphosphorylated, but not ERK-phosphorylated, caldesmon could stabilize actin filaments and resist F-actin severing or depolymerization in both smooth muscle and nonmuscle cells.

Smooth muscle hypertrophy following partial bladder outlet obstruction is associated with overexpression of non-muscle caldesmon

Partial bladder outlet obstruction (PBOO) induces remodeling of urinary bladder smooth muscle (detrusor). We demonstrate an increase in bladder wall mass, muscle bundle size, and a threefold increase in the cross-sectional area of detrusor myocytes following PBOO in male New Zealand White rabbits compared to that of controls. Some bladders with detrusor hypertrophy function close to normal (compensated), whereas others were dysfunctional (decompensated), showing high intravesical pressure, large residual urine volume, and voiding difficulty. We analyzed the expression of smooth muscle-specific caldesmon (h-CaD) and non-muscle (l-CaD) by Western blotting, RT-PCR, and real-time PCR. The expression of l-CaD is increased significantly at the mRNA and protein levels in the decompensated bladders compared to that of normal and compensated bladders. The CaD was also co-localized with myosin containing cytoplasmic fibrils in cells dissociated from obstructed bladders and cultured overnight. Our data show that the inability of decompensated bladders to empty, despite detrusor hypertrophy, is associated with an overexpression of l-CaD. The level of l-CaD overexpression might be a useful marker to estimate the degree of detrusor remodeling and contractile dysfunction in PBOO.

The major myosin-binding site of caldesmon resides near its N-terminal extreme

The primary myosin-binding site of caldesmon was thought to be in the N-terminal region of the molecule, but the exact nature of the caldesmon-myosin interaction has not been well characterized. A caldesmon fragment that encompasses residues 1-240 (N240) was found to bind full-length smooth muscle myosin on the basis of co-sedimentation experiments. The interaction between myosin and N240 was not affected by phosphorylation of myosin, but it was weakened by the presence of Ca(2+)/calmodulin. To locate the myosin-binding site, we have designed several synthetic peptides based on the N-terminal caldesmon sequence. We found that a peptide stretch corresponding to the first 27 residues (Met-1 to Tyr-27), but not that of the first 22 residues (Met-1 to Ala-22), exhibited a moderate affinity toward myosin. We also found that a peptide containing the segment from Ile/Leu-25 to Lys-53 bound both myosin and heavy meromyosin more strongly and was capable of displacing caldesmon from myosin. Our results demonstrate that the sequence near the N-terminal extreme of caldesmon harbors a major myosin-binding site of caldesmon, in which both the nonpolar residues and clusters of positively and negatively charged residues confer the specificity and affinity of the caldesmon-myosin interaction.

Calmodulin remains extended upon binding to smooth muscle caldesmon: a combined small-angle scattering and fourier transform infrared spectroscopy study

We show that calmodulin (CaM) has an extended conformation in its complexes with sequences from the smooth muscle thin filament protein caldesmon (CaD) by using small-angle X-ray and neutron scattering with contrast variation. The CaD sequences used in these experiments were a C-terminal fragment, 22kCaD, and a smaller peptide sequence within this fragment, MG56C. Each of these sequences contains the CaM-binding sites A and B previously shown to interact with the C- and N-terminal lobes of CaM, respectively [Wang et al. (1997) Biochemistry 36, 15026]. By modeling the scattering data, we show that the majority of the MG56C sequence binds to the N-terminal domain of CaM. FTIR data on CaM complexed with 22kCaD or with MG56C peptide show the 22kCaD sequence contains unordered, helix, and extended structures, and that the extended structures reside primarily in the MG56C portion of the sequence. There are small changes in secondary structure, involving approximately 12 residues, induced by CaM binding to CaD. These changes involve a net decrease in extended structures accompanied by an increase in alpha-helix, and they occur within the CaM and/or in the MG56C sequence.

Caldesmon inhibits nonmuscle cell contractility and interferes with the formation of focal adhesions

Caldesmon is known to inhibit the ATPase activity of actomyosin in a Ca(2+)-calmodulin-regulated manner. Although a nonmuscle isoform of caldesmon is widely expressed, its functional role has not yet been elucidated. We studied the effects of nonmuscle caldesmon on cellular contractility, actin cytoskeletal organization, and the formation of focal adhesions in fibroblasts. Transient transfection of nonmuscle caldesmon prevents myosin II-dependent cell contractility and induces a decrease in the number and size of tyrosine-phosphorylated focal adhesions. Expression of caldesmon interferes with Rho A-V14-mediated formation of focal adhesions and stress fibers as well as with formation of focal adhesions induced by microtubule disruption. This inhibitory effect depends on the actin- and myosin-binding regions of caldesmon, because a truncated variant lacking both of these regions is inactive. The effects of caldesmon are blocked by the ionophore A23187, thapsigargin, and membrane depolarization, presumably because of the ability of Ca(2+)-calmodulin or Ca(2+)-S100 proteins to antagonize the inhibitory function of caldesmon on actomyosin contraction. These results indicate a role for nonmuscle caldesmon in the physiological regulation of actomyosin contractility and adhesion-dependent signaling and further demonstrate the involvement of contractility in focal adhesion formation.

Characterisation of the effects of mutation of the caldesmon sequence 691glu-trp-leu-thr-lys-thr696 to pro-gly-his-tyr-asn-asn on caldesmon-calmodulin interaction

We have investigated the functional properties of a mutant (Cg1) derived from the C-terminal 99 amino acids of chicken caldesmon, 658-756 (658C) where the sequence 691glu-trp-leu-thr-lys-thr696 is changed to pro-gly-his-tyr-asn-asn. Cg1 bound Ca2+-calmodulin with (1/7)th of the affinity as compared to 658C or whole caldesmon. NMR titrations indicate that the contacts of Ca2+-calmodulin with the Trp-722 region of the peptide are retained but that those at the mutated site are lost. Most importantly Ca2+-calmodulin is not able to reverse the Cg1-induced inhibition. We conclude that the interaction of calmodulin with this caldesmon sequence is crucial for the reversal of caldesmon inhibition of actin-tropomyosin activation of myosin ATPase. The results are interpreted in terms of multisite attachment of actin and Ca2+-calmodulin to overlapping sequences in caldesmon domain 4b.

Phosphatidylserine liposomes can be tethered by caldesmon to actin filaments

Rotary shadowing electron microscopy revealed that attachment of caldesmon to phosphatidylserine (PS) liposomes was mainly through its C-terminal end. To determine the PS-binding sites of caldesmon, we have made use of synthetic peptides covering the two C-terminal calmodulin binding sites and a recombinant fragment corresponding to the N-terminal end of the C-terminal domain that contains an amphipathic helix. Interactions of these peptides with the PS liposomes were studied by nondenaturing gel electrophoresis and fluorescence spectroscopy. The results showed that both calmodulin-binding sites of caldesmon were able to interact with PS. The affinity (Kd) of PS for these sites was in the range of 1.8-14.3 x 10(-5) M, compared to 0.69 x 10(-5) M for the whole caldesmon molecule. Fragments located outside of calmodulin-binding sites bound PS weakly (3.85 x 10(-4) M) and thus may contain a second class of lipid-binding sites. Binding of PS induced conformational changes in regions other than the C-terminal PS-binding sites, as evidenced by the changes in the susceptibility to proteolytic cleavages. Most significantly, the presence of caldesmon greatly increased binding of PS to F-actin, suggesting that caldesmon may tether PS liposomes to actin filaments. These results raise the possibility that caldesmon-lipid interactions could play a functionally important role in the assembly of contractile filaments near the membranes.

Functional and structural relationship between the calmodulin-binding, actin-binding, and actomyosin-ATPase inhibitory domains on the C terminus of smooth muscle caldesmon

Multiple functional domains responsible for calmodulin (CaM) binding and actin-binding/actomyosin ATPase inhibition are present in the region between residues 598-756 of the chicken gizzard smooth muscle caldesmon (CaD) molecule. To precisely localize these functional domains and to further elucidate the structural basis of these domains, we analyzed a series of purified mutants of chicken gizzard smooth muscle CaD generated by internal deletions of amino acid sequences and expression in a baculovirus expression system. Our results demonstrate that, in addition to a strong actin-binding site sequence between residues 718-723 (Wang, Z., and Chacko, S. (1996) J. Biol. Chem. 271, 25707-25714), two weak actin-binding motifs are present in the regions between residues 690-699 and 650-666. These weak actin-binding regions function independently and are associated with weak actomyosin inhibitory activity. Analysis of the CaM-binding sites A (residues 658-666) and B (residues 690-695), the major CaM-binding sites in the C-terminal region of CaD, provided direct evidence for the involvement of both CaM-binding sites in the CaM-mediated reversal of the inhibition of actomyosin ATPase activity by CaD and for the functional independence of the two CaM-binding sites. Furthermore, the sequences between residues 598-649, upstream of CaM-binding site A, and 700-717, downstream of CaM-binding site B, appear to have no effect on either actin-binding or CaM-binding. The data also suggest that both CaM-binding sites A and B structurally overlap or lie in close proximity to the adjacent weak actin-binding sites and weak actomyosin ATPase inhibitory determinants.

Mapping of contact sites in the caldesmon-calmodulin complex

The interaction of intact calmodulin and its four tryptic peptides with deletion mutants of caldesmon was analysed by native gel electrophoresis, fluorescence spectroscopy and zero-length cross-linking. Deletion mutants H2 (containing calmodulin-binding sites A and B) and H9 (containing sites B and B') interacted with intact calmodulin to form complexes whose stoichiometries varied from 2:1 to 1:1. The N-terminal peptides of calmodulin (TR1C, residues 1-77, and TR2E, residues 1-90) bound H2 with higher affinity than H9. At the same time H2 was less effective than H9 in binding to the C-terminal peptides of calmodulin TR2C (residues 78-148) and TR3E (residues 107-148). The N-terminal peptides of calmodulin (TR1C and TR2E) could be cross-linked to intact caldesmon and its deletion mutants H2 and H9. The similarity in the primary structures of sites A and B' of caldesmon and our measurements of the affinities of H2 and H9 to calmodulin and its peptides strongly indicate an orientation of the protein complex where sites A and B' interact with the N-terminal domain of calmodulin, whereas site B interacts with the C-terminal domain of calmodulin. The spatial organization of contact sites in the caldesmon-calmodulin complex agrees with the earlier proposed two-dimensional model of interaction of the two proteins [Huber, El-Mezgueldi, Grabarek, Slatter, Levine and Marston (1996) Biochem. J. 316, 413-420].

Heat treatment could affect the biochemical properties of caldesmon

Smooth muscle caldesmon (CaD) exhibits apparent heat stability. A widely used purification procedure of CaD involves extensive heat treatment (Bretscher, A. (1984) J. Biol. Chem. 259, 12873-12880). CaD thus purified co-sediments with actin, inhibits actomyosin ATPase activity, and interacts with Ca2+/calmodulin, similarly to the unheated protein. On the other hand, heat-treated CaD binds to actin filaments in a tether-like fashion, whereas lengthwise binding dominates in vivo (Mabuchi, K., Lin, J. J.-C., and Wang, C.-L. A. (1993) J. Muscle Res. Cell Motil. 14, 54-64), suggesting that differences do exist between heat-purified CaD and the native protein. We have isolated, without heat treatment, full-length recombinant chicken gizzard CaD overexpressed in insect cells (High-FiveTM) using a baculovirus expression system. We found that such unheated CaD interacts with calmodulin 10 times stronger than does the heated CaD; its inhibitory action on actomyosin ATPase is reversed by a much lesser amount of calmodulin. Moreover, electron microscopic examination indicated that actin binding at the N-terminal region is more frequent in the unheated CaD, resulting in more lengthwise binding. These findings point to the fact that CaD is not entirely heat-stable; the C-terminal CaM-binding regions and the N-terminal actin-binding region are possibly affected by heat treatment.

Mutagenesis analysis of functionally important domains within the C-terminal end of smooth muscle caldesmon

The ability of chicken gizzard smooth muscle caldesmon (CaD) to inhibit actomyosin ATPase activity is due mainly to an inhibitory domain that resides within the C-terminal 67 amino acid residues of the CaD molecule. In the present study, a series of C-terminal truncation and internal deletion mutants of chicken gizzard smooth muscle CaD were systematically designed using a site-directed mutagenesis approach, and these mutant proteins were overexpressed in a baculovirus expression system. Analysis of actin binding and inhibition of actomyosin ATPase activity using these mutants identified a strong actin-binding motif of 6 amino acid residues (from Lys718 to Glu723), which also form the core sequence for CaD-induced inhibition of actomyosin ATPase. However, maximal inhibition by CaD requires the presence of residues 728-731, which are not associated with actin binding. Our data provide direct evidence for the requirement of actin binding to a specific region in CaD for CaD-induced inhibition of actin activation of smooth muscle myosin ATPase. Furthermore, our findings also show that the region between residues 690 and 717 is responsible for the weak inhibition of actomyosin ATPase and reveal that the inhibitory determinants located in the regions between residues 690 and 717 and residues 718 and 756 can function independently.

Affinity and structure of complexes of tropomyosin and caldesmon domains

The interaction of caldesmon domains with tropomyosin has been studied using x-ray crystallography and an optical biosensor. Only whole caldesmon and the carboxyl-terminal domain of caldesmon (CaD-4, chicken gizzard residues 597-756) bound to tropomyosin with greater than millimolar affinity at 100 and 150 microM salt. Under these conditions the affinities of whole caldesmon and CaD-4 were both in the micromolar range. Data from the x-ray studies showed that whole caldesmon bound to tropomyosin in several places, with the region of tightest interaction being at tropomyosin residues 70-100 and/or 230-260. Studies with CaD-4 revealed that this region corresponded to the strong binding site seen with whole caldesmon. Weaker association of other regions of caldesmon to tropomyosin residues 180-210 and 5-50 was also observed. The results suggest that the carboxyl-terminus of caldesmon binds tightly to tropomyosin and that other regions of caldesmon may interact with tropomyosin tightly only when they are held close to tropomyosin by the carboxyl-terminal domain. Four models are presented to show the possible interactions of caldesmon with tropomyosin.

Inducible nitric oxide synthase requires both the canonical calmodulin-binding domain and additional sequences in order to bind calmodulin and produce nitric oxide in the absence of free Ca2+

All three mammalian isoforms of nitric oxide synthase (NOS) must bind calmodulin (CaM) for enzymatic activity. Only NOS2 (the inducible isoform, iNOS) does so at the low levels of free Ca2+ in resting cells and when almost all Ca2+ is chelated in cell-free preparations. To test directly whether the predicted CaM-binding region of mouse NOS2 accounts for its Ca2+ independence, we prepared chimeric NOS's in which mouse NOS2 residues 503-532 were reciprocally exchanged with the corresponding residues 725-754 of rat NOS1 (neuronal NOS). Unlike either parent, both chimeras required an intermediate level of free Ca2+ to bind CaM and generate NO. In cell lysates, the concentration of Ca2+ necessary for half-maximal activity (EC50) was approximately 0 for NOS2, 200-300 n for NOS1, and 7-10 n for the chimeras. Results were similar when the region exchanged was enlarged by 7-8 residues toward the amino terminus. In contrast, when the carboxyl-terminal half of NOS2 (residues 454-1144) was replaced with that of NOS1 (residues 675-1429), the resulting chimera resembled NOS1 (EC50, 200-300 n free Ca2+). Truncation analysis suggested that NOS2 residues within the sequence 484-726 were required for Ca2+-independent CaM-binding. Thus, both the canonical CaM-binding domain and additional residues within the region 484-726 are necessary for NOS2's ability to bind CaM and produce NO when Ca2+ levels approach zero.

Multiple-sited interaction of caldesmon with Ca(2+)-calmodulin

The binding of Ca(2+)- and Ba(2+)-calmodulin to caldesmon and its functional consequence was investigated with three different calmodulin mutants. Two calmodulin mutants have pairs of cysteine residues substituted and oxidized to a disulphide bond in either the N- or C-terminal lobe (C41/75 and C85/112). The third mutant has phenylalanine-92 replaced by alanine (F92A). Binding measurements in the presence of Ca2+ by separation on native gels and by carbodiimide-induced cross-linking showed a lower affinity for caldesmon in all the mutants. When Ca2+ was replaced by Ba2+ the affinity of calmodulin for caldesmon was further reduced. The ability of Ca(2+)-calmodulin to release caldesmon's inhibition of the actin-tropomyosin-activated myosin ATPase was virtually abolished by mutation of phenylalanine-92 to alanine or by replacing Ba2+ for Ca2+ in native calmodulin. Both cysteine mutants retained their functional ability, but the increased concentration needed for 50% release of caldesmon inhibition reflected their decreased affinity. Ca2+ -calmodulin produced a broadening in the signals of the NMR spectrum of the 10 kDa Ca(2+)-calmodulin-binding C-terminal fragment of caldesmon arising from tryptophans -749 and -779 and caused an enhancement of maximum tryptophan fluorescence of 49% and a 16 nm blue shift of the maximum. Ca(2+)-calmodulin F92A produced a change in wavelength of 4 nm but no change in maximum, whereas Ca(2+)-calmodulin C41/75 binding produced a decrease in fluorescence with no shift of the maximum. We conclude that functional binding of Ca(2+)-calmodulin to caldesmon requires multiple interaction sites on both molecules. However, some structural modification in calmodulin does not abolish the caldesmon-related functionality. This suggests that various EF hand proteins can substitute for the calmodulin molecule.