Lock on/off disulfides identify the transmembrane signaling helix of the aspartate receptor

Mechanism of metal ion-induced activation of a two-component sensor kinase

Two-component systems (TCSs) are essential for bacteria to sense, respond, and adapt to changing environments, such as elevation of Cu(I)/Ag(I) ions in the periplasm. In Escherichia coli, the CusS-CusR TCS up-regulates the cusCFBA genes under increased periplasmic Cu(I)/Ag(I) concentrations to help maintain metal ion homeostasis. The CusS histidine kinase is a homodimeric integral membrane protein that binds to periplasmic Cu(I)/Ag(I) and transduces a signal to its cytoplasmic kinase domain. However, the mechanism of how metal binding in the periplasm activates autophosphorylation in the cytoplasm is unknown. Here, we report that only one of the two metal ion-binding sites in CusS enhances dimerization of the sensor domain. Utilizing nanodisc technology to study full-length CusS, we show that metal-induced dimerization in the sensor domain triggers kinase activity in the cytoplasmic domain. We also investigated autophosphorylation in the cytoplasmic domain of CusS and phosphotransfer between CusS and CusR. In vitro analyses show that CusS autophosphorylates its conserved H271 residue at the N1 position of the histidine imidazole. The phosphoryl group is removed by the response regulator CusR in a reaction that requires a conserved aspartate at position 51. Functional analyses in vivo of CusS and CusR variants with mutations in the autophosphorylation or phosphoacceptor residues suggest that the phosphotransfer event is essential for metal resistance in E. coli Biochemical analysis shows that the CusS dimer autophosphorylates using a cis mechanism. Our results support a signal transduction model in which rotation and bending movements in the cytoplasmic domain maintain the mode of autophosphorylation.

Evidence for a Helix-Clutch Mechanism of Transmembrane Signaling in a Bacterial Chemoreceptor

The Escherichia coli Tsr protein contains a periplasmic serine-binding domain that transmits ligand occupancy information to a cytoplasmic kinase-control domain to regulate the cell's flagellar motors. The Tsr input and output domains communicate through conformational changes transmitted through a transmembrane helix (TM2), a five-residue control cable helix at the membrane-cytoplasm interface, and a four-helix HAMP bundle. Changes in serine occupancy are known to promote TM2 piston displacements in one subunit of the Tsr homodimer. We explored how such piston motions might be relayed through the control cable to reach the input AS1 helix of HAMP by constructing and characterizing mutant receptors that had one-residue insertions or deletions in the TM2-control cable segment of Tsr. TM2 deletions caused kinase-off output shifts; TM2 insertions caused kinase-on shifts. In contrast, control cable deletions caused kinase-on output, whereas insertions at the TM2-control cable junction caused kinase-off output. These findings rule out direct mechanical transmission of TM2 conformational changes to HAMP. Instead, we suggest that the Tsr control cable transmits input signals to HAMP by modulating the intensity of structural clashes between out-of-register TM2 and AS1 helices. Inward displacement of TM2 might alter the sidechain environment of control cable residues at the membrane core-headgroup interface, causing a break in the control cable helix to attenuate the register mismatch and enhance HAMP packing stability, leading to a kinase-off output response. This helix-clutch model offers a new perspective on the mechanism of transmembrane signaling in chemoreceptors.

Cys-scanning disulfide crosslinking and bayesian modeling probe the transmembrane signaling mechanism of the histidine kinase, PhoQ

Bacteria transduce signals across the membrane using two-component systems (TCSs), consisting of a membrane-spanning sensor histidine kinase and a cytoplasmic response regulator. In gram-negative bacteria, the PhoPQ TCS senses cations and antimicrobial peptides, yet little is known about the structural changes involved in transmembrane signaling. We construct a model of PhoQ signal transduction using Bayesian inference, based on disulfide crosslinking data and homologous crystal structures. The data are incompatible with a single conformation but are instead consistent with two interconverting structures. These states differ in membrane depth of the periplasmic acidic patch and the reciprocal displacement of diagonal helices along the dimer interface. Studies of multiple histidine kinases suggest this repacking might be a common mode of signal transduction in sensor His-kinase receptors. Because a similar scissors model has been ruled out in CheA-linked chemoreceptors, the evidence suggests that sensor His-kinase and CheA-linked receptors possess different signaling mechanisms.

Increasing and decreasing the ultrastability of bacterial chemotaxis core signaling complexes by modifying protein-protein contacts

The chemosensory signaling array of bacterial chemotaxis is composed of functional core units containing two receptor trimers of dimers, a homodimeric CheA kinase, and two CheW adaptor proteins. In vitro reconstitutions generate individual, functional core units and larger functional assemblies, including dimers, hexagons, and hexagonal arrays. Such reconstituted complexes have been shown to have both quasi-stable and ultrastable populations that decay with lifetimes of 1–2 days and ∼3 weeks at 22 °C, respectively, where decay results primarily from proteolysis of the bound kinase [Erbse, A. H., and Falke, J. J. (2009) Biochemistry 48, 6975–6987; Slivka, P. F., and Falke, J. J. (2012) Biochemistry 51, 10218–10228]. In this work, we show that the ultrastable population can be destabilized to the quasi-stable level via the introduction of a bulky tryptophan residue at either one of two essential protein–protein interfaces within the core unit: the receptor–kinase contact or kinase–adaptor interface 1. Moreover, we demonstrate that the quasi-stable population can be made ultrastable via the introduction of a disulfide bond that covalently stabilizes the latter interface. The resulting disulfide at least doubles the functional lifetime of the ultrastable population, to ≥5.9 weeks at 22 °C, by protecting the kinase from endogenous and exogenous proteases. Together, these results indicate that the ultrastability of reconstituted core complexes requires well-formed contacts among the receptor, kinase, and adaptor proteins, whereas quasi-stability arises from less perfect contacts that allow slow proteolysis of the bound kinase. Furthermore, the results reveal that ultrastability, and perhaps the size or order of chemosensory complexes and arrays, can be increased by an engineered disulfide bond that covalently cross-links a key interface. Overall, it appears that native ultrastability has evolved to provide an optimal rather than maximal level of kinetic durability, suggesting that altered selective pressure could either increase or decrease the functional lifetime of core complexes.

New insights into bacterial chemoreceptor array structure and assembly from electron cryotomography

Bacterial chemoreceptors cluster in highly ordered, cooperative, extended arrays with a conserved architecture, but the principles that govern array assembly remain unclear. Here we show images of cellular arrays as well as selected chemoreceptor complexes reconstituted in vitro that reveal new principles of array structure and assembly. First, in every case, receptors clustered in a trimers-of-dimers configuration, suggesting this is a highly favored fundamental building block. Second, these trimers-of-receptor dimers exhibited great versatility in the kinds of contacts they formed with each other and with other components of the signaling pathway, although only one architectural type occurred in native arrays. Third, the membrane, while it likely accelerates the formation of arrays, was neither necessary nor sufficient for lattice formation. Molecular crowding substituted for the stabilizing effect of the membrane and allowed cytoplasmic receptor fragments to form sandwiched lattices that strongly resemble the cytoplasmic chemoreceptor arrays found in some bacterial species. Finally, the effective determinant of array structure seemed to be CheA and CheW, which formed a "superlattice" of alternating CheA-filled and CheA-empty rings that linked receptor trimers-of-dimer units into their native hexagonal lattice. While concomitant overexpression of receptors, CheA, and CheW yielded arrays with native spacing, the CheA occupancy was lower and less ordered, suggesting that temporal and spatial coordination of gene expression driven by a single transcription factor may be vital for full order, or that array overgrowth may trigger a disassembly process. The results described here provide new insights into the assembly intermediates and assembly mechanism of this massive macromolecular complex.

Structure, function, and on-off switching of a core unit contact between CheA kinase and CheW adaptor protein in the bacterial chemosensory array: A disulfide mapping and mutagenesis study

The ultrasensitive, ultrastable bacterial chemosensory array of Escherichia coli and Salmonella typhimurium is representative of the large, conserved family of sensory arrays that control the cellular chemotaxis of motile bacteria and Archaea. The core framework of the membrane-bound array is a lattice assembled from three components: a transmembrane receptor, a cytoplasmic His kinase (CheA), and a cytoplasmic adaptor protein (CheW). Structural studies in the field have revealed the global architecture of the array and complexes between specific components, but much remains to be learned about the essential protein-protein interfaces that define array structure and transmit signals between components. This study has focused on the structure, function, and on-off switching of a key contact between the kinase and adaptor proteins in the working, membrane-bound array. Specifically, the study addressed interface 1 in the putative kinase-adaptor ring where subdomain 1 of the kinase regulatory domain contacts subdomain 2 of the adaptor protein. Two independent approaches, disulfide mapping and site-directed Trp and Ala mutagenesis, were employed (i) to test the structural model of interface 1 and (ii) to investigate its functional roles in both stable kinase incorporation and receptor-regulated kinase on-off switching. Studies were conducted in functional, membrane-bound arrays or in live cells. The findings reveal that crystal structures of binary and ternary complexes accurately depict the native interface in its kinase-activating on state. Furthermore, the findings indicate that at least part of the interface becomes less closely packed in its kinase-inhibiting off state. Together, the evidence shows the interface has a dual structural and signaling function that is crucial for incorporation of the stable kinase into the array, for kinase activation in the array on state, and likely for attractant-triggered kinase on-off switching. A model is presented that describes the concerted transmission of a conformational signal among the receptor, the kinase regulatory domain, and the adaptor protein. In principle, this signal could spread out into the surrounding array via the kinase-adaptor ring, employing a series of alternating frozen-dynamic transitions that transmit low-energy attractant signals long distances.

Discovery of novel chemoeffectors and rational design of Escherichia coli chemoreceptor specificity

Bacterial chemoreceptors mediate chemotactic responses to diverse stimuli. Here, by using an integrated in silico, in vitro, and in vivo approach, we screened a large compound library and found eight novel chemoeffectors for the Escherichia coli chemoreceptor Tar. Six of the eight new Tar binding compounds induce attractant responses, and two of them function as antagonists that can bind Tar without inducing downstream signaling. Comparison between the antagonist and attractant binding patterns suggests that the key interactions for chemotaxis signaling are mediated by the hydrogen bonds formed between a donor group in the attractant and the main-chain carbonyls (Y149 and/or Q152) on the α4 helix of Tar. This molecular insight for signaling is verified by converting an antagonist to an attractant when introducing an N-H group into the antagonist to restore the hydrogen bond. Similar signal triggering effect by an O-H group is also confirmed. Our study suggests that the Tar chemoeffector binding pocket may be separated into two functional regions: region I mainly contributes to binding and region II contributes to both binding and signaling. This scenario of binding and signaling suggests that Tar may be rationally designed to respond to a nonnative ligand by altering key residues in region I to strengthen binding with the novel ligand while maintaining the key interactions in region II for signaling. Following this strategy, we have successfully redesigned Tar to respond to l-arginine, a basic amino acid that does not have chemotactic effect for WT Tar, by two site-specific mutations (R69'E and R73'E).

In vivo studies suggest that induction of VanS-dependent vancomycin resistance requires binding of the drug to D-Ala-D-Ala termini in the peptidoglycan cell wall

VanRS two-component regulatory systems are key elements required for the transcriptional activation of inducible vancomycin resistance genes in bacteria, but the precise nature of the ligand signal that activates these systems has remained undefined. Using the resistance system in Streptomyces coelicolor as a model, we have undertaken a series of in vivo studies which indicate that the VanS sensor kinase in VanB-type resistance systems is activated by vancomycin in complex with the d-alanyl-d-alanine (d-Ala-d-Ala) termini of cell wall peptidoglycan (PG) precursors. Complementation of an essential d-Ala-d-Ala ligase activity by constitutive expression of vanA encoding a bifunctional d-Ala-d-Ala and d-alanyl-d-lactate (d-Ala-d-Lac) ligase activity allowed construction of strains that synthesized variable amounts of PG precursors containing d-Ala-d-Ala. Assays quantifying the expression of genes under VanRS control showed that the response to vancomycin in these strains correlated with the abundance of d-Ala-d-Ala-containing PG precursors; strains producing a lower proportion of PG precursors terminating in d-Ala-d-Ala consistently exhibited a lower response to vancomycin. Pretreatment of wild-type cells with vancomycin or teicoplanin to saturate and mask the d-Ala-d-Ala binding sites in nascent PG also blocked the transcriptional response to subsequent vancomycin exposure, and desleucyl vancomycin, a vancomycin analogue incapable of interacting with d-Ala-d-Ala residues, failed to induce van gene expression. Activation of resistance by a vancomycin-d-Ala-d-Ala PG complex predicts a limit to the proportion of PG that can be derived from precursors terminating in d-Ala-d-Lac, a restriction also enforced by the bifunctional activity of the VanA ligase.

Residues at the cytoplasmic end of transmembrane helix 2 determine the signal output of the TarEc chemoreceptor

Baseline signal output and communication between the periplasmic and cytoplasmic domains of the Escherichia coli aspartate chemoreceptor Tar(Ec) are both strongly influenced by residues at the C-terminus of transmembrane helix 2 (TM2). In particular, the cytoplasmic aromatic anchor, composed of residues Trp-209 and Tyr-210 in wild-type Tar(Ec), is important for determining the CheA kinase-stimulating activity of the receptor and its ability to respond to chemoeffector-induced stimuli. Here, we have studied the effect on Tar(Ec) function of the six-residue sequence at positions 207-212. Moving various combinations of aromatic residues among these positions generates substantial changes in receptor activity. Trp has the largest effect on function, both in maintaining normal activity and in altering activity when it is moved. Tyr has a weaker effect, and Phe has the weakest; however, all three aromatic residues can alter signal output when they are placed in novel positions. We also find that Gly-211 plays an important role in receptor function, perhaps because of the flexibility it introduces into the TM2-HAMP domain connector. The conservation of this Gly residue in the high-abundance chemoreceptors of E. coli and Salmonella enterica suggests that it may be important for the nuanced, bidirectional transmembrane signaling that occurs in these proteins.

Identifying functionally important conformational changes in proteins: activation of the yeast α-factor receptor Ste2p

We have developed a procedure in which disulfide cross-links are used to identify regions of proteins that undergo functionally important intramolecular motion. The approach was applied to the identification of disulfide bonds that stabilize the active state of the yeast α-mating pheromone receptor Ste2p, a member of the superfamily of G protein-coupled receptors. Cysteine residues were introduced at random positions in targeted regions of a starting allele of Ste2p that completely lacks cysteines. Libraries of mutated receptors were then screened for alleles that exhibit constitutive signaling. Two strongly activated alleles were recovered containing cysteine residues in transmembrane (TM) segments 5 and 6. Constitutive activity of these alleles was dependent on the presence of both introduced cysteines and was sensitive to reducing agent. Cross-linked peptides derived from the mutant receptors were detected by immunoblotting. Additional sites of cross-linking between TM segments 5 and 6 that did not lead to constitutive activation were also identified. These results indicate that relative motion of the TM segments 5 and 6 in the extracellular half of the membrane is sufficient to activate the receptor and that TM segment 6, but not TM segment 5, exhibits rotational mobility that is not associated with receptor activation.

Molecular architecture of chemoreceptor arrays revealed by cryoelectron tomography of Escherichia coli minicells

The chemoreceptors of Escherichia coli localize to the cell poles and form a highly ordered array in concert with the CheA kinase and the CheW coupling factor. However, a high-resolution structure of the array has been lacking, and the molecular basis of array assembly has thus remained elusive. Here, we use cryoelectron tomography of flagellated E. coli minicells to derive a 3D map of the intact array. Docking of high-resolution structures into the 3D map provides a model of the core signaling complex, in which a CheA/CheW dimer bridges two adjacent receptor trimers via multiple hydrophobic interactions. A further, hitherto unknown, hydrophobic interaction between CheW and the homologous P5 domain of CheA in an adjacent core complex connects the complexes into an extended array. This architecture provides a structural basis for array formation and could explain the high sensitivity and cooperativity of chemotaxis signaling in E. coli.

The residue composition of the aromatic anchor of the second transmembrane helix determines the signaling properties of the aspartate/maltose chemoreceptor Tar of Escherichia coli

Repositioning of the tandem aromatic residues (Trp-209 and Tyr-210) at the cytoplasmic end of the second transmembrane helix (TM2) modulates the signal output of the aspartate/maltose chemoreceptor of Escherichia coli (Tar(Ec)). Here, we directly assessed the effect of the residue composition of the aromatic anchor by studying the function of a library of Tar(Ec) variants that possess all possible combinations of Ala, Phe, Tyr, and Trp at positions 209 and 210. We identified three important properties of the aromatic anchor. First, a Trp residue at position 209 was required to maintain clockwise (CW) signal output in the absence of adaptive methylation, but adaptive methylation restored the ability of all of the mutant receptors to generate CW rotation. Second, when the aromatic anchor was replaced with tandem Ala residues, signaling was less compromised than when an Ala residue occupied position 209 and an aromatic residue occupied position 210. Finally, when Trp was present at position 209, the identity of the residue at position 210 had little effect on baseline signal output or aspartate chemotaxis, although maltose taxis was significantly affected by some substitutions at position 210. All of the mutant receptors we constructed supported some level of aspartate and maltose taxis in semisolid agar swim plates, but those without Trp at position 209 were overmethylated in their baseline signaling state. These results show the importance of the cytoplasmic aromatic anchor of TM2 in maintaining the baseline Tar(Ec) signal output and responsiveness to attractant signaling.

Phototactic and chemotactic signal transduction by transmembrane receptors and transducers in microorganisms

Microorganisms show attractant and repellent responses to survive in the various environments in which they live. Those phototaxic (to light) and chemotaxic (to chemicals) responses are regulated by membrane-embedded receptors and transducers. This article reviews the following: (1) the signal relay mechanisms by two photoreceptors, Sensory Rhodopsin I (SRI) and Sensory Rhodopsin II (SRII) and their transducers (HtrI and HtrII) responsible for phototaxis in microorganisms; and (2) the signal relay mechanism of a chemoreceptor/transducer protein, Tar, responsible for chemotaxis in E. coli. Based on results mainly obtained by our group together with other findings, the possible molecular mechanisms for phototaxis and chemotaxis are discussed.

From signal perception to signal transduction: ligand-induced dimeric switch of DctB sensory domain in solution

Sinorhizobium meliloti DctB is a typical transmembrane sensory histidine kinase, which senses C(4)-dicarboxylic acids (DCA) and regulates the expression of DctA, the DCA transporter. We previously reported the crystal structures of its periplasmic sensory domain (DctBp) in apo and succinate-bound states, and these structures showed dramatic conformational changes at dimeric level. Here we show a ligand-induced dimeric switch in solution and a strong correlation between DctBp's dimerization states and the in vivo activities of DctB. Using site-directed mutagenesis, we identify important determinants for signal perception and transduction. Specifically, we show that the ligand-binding pocket is essential for DCA-induced 'on' activity of DctB. Mutations at different sections of DctBp's dimerization interface can lock full-length DctB at either 'on' or 'off' state, independent of ligand binding. Taken together, these results suggest that DctBp's signal perception and transduction occur through a 'ligand-induced dimeric switch', in which the changes in the dimeric conformations upon ligand binding are responsible for the signal transduction in DctB.

The S helix mediates signal transmission as a HAMP domain coiled-coil extension in the NarX nitrate sensor from Escherichia coli K-12

In the nitrate-responsive, homodimeric NarX sensor, two cytoplasmic membrane alpha-helices delimit the periplasmic ligand-binding domain. The HAMP domain, a four-helix parallel coiled-coil built from two alpha-helices (HD1 and HD2), immediately follows the second transmembrane helix. Previous computational studies identified a likely coiled-coil-forming alpha-helix, the signaling helix (S helix), in a range of signaling proteins, including eucaryal receptor guanylyl cyclases, but its function remains obscure. In NarX, the HAMP HD2 and S-helix regions overlap and apparently form a continuous coiled-coil marked by a heptad repeat stutter discontinuity at the distal boundary of HD2. Similar composite HD2-S-helix elements are present in other sensors, such as Sln1p from Saccharomyces cerevisiae. We constructed deletions and missense substitutions in the NarX S helix. Most caused constitutive signaling phenotypes. However, strongly impaired induction phenotypes were conferred by heptad deletions within the S-helix conserved core and also by deletions that remove the heptad stutter. The latter observation illuminates a key element of the dynamic bundle hypothesis for signaling across the heptad stutter adjacent to the HAMP domain in methyl-accepting chemotaxis proteins (Q. Zhou, P. Ames, and J. S. Parkinson, Mol. Microbiol. 73:801-814, 2009). Sequence comparisons identified other examples of heptad stutters between a HAMP domain and a contiguous coiled-coil-like heptad repeat sequence in conventional sensors, such as CpxA, EnvZ, PhoQ, and QseC; other S-helix-containing sensors, such as BarA and TorS; and the Neurospora crassa Nik-1 (Os-1) sensor that contains a tandem array of alternating HAMP and HAMP-like elements. Therefore, stutter elements may be broadly important for HAMP function.

Conserved polar residues stabilize transmembrane domains and promote oligomerization in human nucleoside triphosphate diphosphohydrolase 3

Polar residues play essential roles in the functions of transmembrane helices by mediating and stabilizing their helical interactions. To investigate the structural and functional roles of the conserved polar residues in the N- and C-terminal transmembrane helices of human nucleoside triphosphate diphosphohydrolase 3 (NTPDase3) (N-terminus, S33, S39, T41, and Q44; C-terminus, T490, T495, and C501), each was singly mutated to alanine. The mutant proteins were analyzed for enzymatic activities, glycosylation status, expression level, and Triton X-100 detergent sensitivity. The Q44A mutation decreased Mg-ATPase activity by approximately 70% and abolished Triton X-100 detergent inhibition of Ca-dependent nucleotidase activities while greatly attenuating Triton X-100 inhibition of Mg-dependent nucleotidase activities. The polar residues were also mutated to cysteine, singly and in pairs, to allow a disulfide cross-linking strategy to map potential inter- and intramolecular hydrogen bond interactions. The results support the centrality of Q44 for the strong intermolecular interactions driving the association of the N-terminal helices of two NTPDase3 monomers in a dimer, and the possibility that T41 may play a role in the specificity of this interaction. In addition, S33 and C501 form an intramolecular association, while S39 and T495 may contribute to helical interactions involved in forming higher-order oligomers. Lastly, Tween 20 substantially and selectively increases NTPDase3 activity, mediated by the transmembrane helices containing the conserved polar residues. Taken together, the data suggest a model for putative hydrogen bond interactions of the conserved polar residues in the transmembrane domain of native, oligomeric NTPDase3. These interactions are important for proper protein expression, full enzymatic activity, and susceptibility to membrane perturbations.

Engineered socket study of signaling through a four-helix bundle: evidence for a yin-yang mechanism in the kinase control module of the aspartate receptor

The chemoreceptors of Escherichia coli and Salmonella typhimurium form stable oligomers that associate with the coupling protein CheW and the histidine kinase CheA to form an ultrasensitive, ultrastable signaling lattice. Attractant binding to the periplasmic domain of a given receptor dimer triggers a transmembrane conformational change transmitted through the receptor to its cytoplasmic kinase control module, a long four-helix bundle that binds and regulates CheA kinase. The kinase control module comprises three functional regions: the adaptation region possessing the receptor adaptation sites, a coupling region that transmits signals between other regions, and the protein interaction region possessing contact sites for receptor oligomerization and for CheA-CheW binding. On the basis of the spatial clustering of known signal locking Cys substitutions and engineered disulfide bonds, this study develops the yin-yang hypothesis for signal transmission through the kinase control module. This hypothesis proposes that signals are transmitted through the four-helix bundle via changes in helix-helix packing and that the helix packing changes in the adaptation and protein interaction regions are tightly and antisymmetrically coupled. Specifically, strong helix packing in the adaptation region stabilizes the receptor on state, while strong helix packing in the protein interaction region stabilizes the off state. To test the yin-yang hypothesis, conserved sockets likely to strengthen specific helix-helix contacts via knob-in-hole packing interactions were identified in the adaptation, coupling, and protein interaction regions. For 32 sockets, the knob side chain was truncated to Ala to weaken the knob-in-hole packing and thereby destabilize the local helix-helix interaction provided by that socket. We term this approach a "knob truncation scan". Of the 32 knob truncations, 28 yielded stable receptors. Functional analysis of the signaling state of these receptors revealed seven lock-off knob truncations, all located in the adaptation region, that trap the receptor in its "off" signaling state (low kinase activity, high methylation activity). Also revealed were five lock-on knob truncations, all located in the protein interaction region, that trap the "on" state (high kinase activity, low methylation activity). These findings provide strong evidence that a yin-yang coupling mechanism generates concerted, antisymmetric helix-helix packing changes within the adaptation and protein interaction regions during receptor on-off switching. Conserved sockets that stabilize local helix-helix interactions play a central role in this mechanism: in the on state, sockets are formed in the adaptation region and disrupted in the protein interaction region, while the opposite is true in the off state.

The core signaling proteins of bacterial chemotaxis assemble to form an ultrastable complex

The chemosensory pathway of bacterial chemotaxis forms a polar signaling cluster in which the fundamental signaling units, the ternary complexes, are arrayed in a highly cooperative, repeating lattice. The repeating ternary units are composed of transmembrane receptors, histidine-kinase CheA, and coupling protein CheW, but it is unknown how these three core proteins are interwoven in the assembled ultrasensitive lattice. Here, to further probe the nature of the lattice, we investigate its stability. The findings reveal that once the signaling cluster is assembled, CheA remains associated and active for days in vitro. All three core components are required for this ultrastable CheA binding and for receptor-controlled kinase activity. The stability is disrupted by low ionic strength or high pH, providing strong evidence that electrostatic repulsion between the highly acidic core components can lead to disassembly. We propose that ultrastability arises from the assembled lattice structure that establishes multiple linkages between the core components, thereby conferring thermodynamic or kinetic ultrastability to the bound state. An important, known function of the lattice structure is to facilitate receptor cooperativity, which in turn enhances pathway sensitivity. In the cell, however, the ultrastability of the lattice could lead to uncontrolled growth of the signaling complex until it fills the inner membrane. We hypothesize that such uncontrolled growth is prevented by an unidentified intracellular disassembly system that is lost when complexes are isolated from cells, thereby unmasking the intrinsic complex ultrastability. Possible biological functions of ultrastability are discussed.

The region preceding the C-terminal NWETF pentapeptide modulates baseline activity and aspartate inhibition of Escherichia coli Tar

The Tar chemoreceptor-CheA-CheW ternary complex of Escherichia coli is a transmembrane allosteric enzyme in which binding of ligands to the periplasmic domain modulates the activity of CheA kinase. Kinase activity is also affected by reversible methylation of four glutamyl residues in the cytoplasmic domain of the receptor. E. coli Tar contains 553 residues. Residues 549-553 comprise the NWETF pentapeptide that binds the CheR methyltransferase and CheB methylesterase. The crystal structure of the similar Tsr chemoreceptor predicts that residues 263-289 and 490-515 of Tar form the most membrane-proximal portion of the extended CD1-CD2 four-helix bundle of the cytoplasmic domain. The last methylation site, Glu-491, is in the C19 heptad, and the N22-19 and C22-19 heptads are present in all classes of bacterial transmembrane chemoreceptors. Residues 516-548 probably serve as a flexible tether for the NWETF pentapeptide. Here, we present a mutational analysis of residues 505-548. The more of this region that is deleted, the less sensitive Tar is to inhibition by aspartate. Tar deleted from residue 505 through the NWETF sequence stimulates CheA in vitro but is not inhibited by aspartate. Thus, interaction of the last two heptads (C21 and C22) of CD2 with the first two heptads (N22 and N21) of CD1 must be important for transmitting an inhibitory signal from the HAMP domain to the four-helix bundle. The R514A, K523A, R529A, R540A, and R542A substitutions, singly or together, increase the level of activation of CheA in vitro, whereas the R505A substitution decreases the level of CheA stimulation by 40% and lowers the aspartate K(i) 7-fold. The R505E substitution completely abolishes stimulation of CheA in vitro. Glu-505 may interact electrostatically with Asp-273 to destabilize the "on" signaling state by loosening the four-helix bundle.

Distinct gate conformations of the ABC transporter BtuCD revealed by electron spin resonance spectroscopy and chemical cross-linking

BtuCD is a type II ABC importer that catalyzes the translocation of vitamin B12 from the periplasm into the cytoplasm of Escherichia coli. Crystal structures of BtuCD and the related HiF (or Hi1470/71) protein from Haemophilus influenzae have revealed distinct conformations of the transmembrane domains that form inner and outer gates. We used electron spin resonance spectroscopy to study the reaction cycle of BtuCD after labeling the protein at residues located at these gates. The results suggest that BtuCD as a prototype type II ABC importer may have a mechanism that is distinct from that of ABC exporters such as Sav1866 or type I ABC importers such as those specific for molybdate (ModBC) or maltose (MalFGK).

Structural basis of trans-inhibition in a molybdate/tungstate ABC transporter

Transport across cellular membranes is an essential process that is catalyzed by diverse membrane transport proteins. The turnover rates of certain transporters are inhibited by their substrates in a process termed trans-inhibition, whose structural basis is poorly understood. We present the crystal structure of a molybdate/tungstate ABC transporter (ModBC) from Methanosarcina acetivorans in a trans-inhibited state. The regulatory domains of the nucleotide-binding subunits are in close contact and provide two oxyanion binding pockets at the shared interface. By specifically binding to these pockets, molybdate or tungstate prevent adenosine triphosphatase activity and lock the transporter in an inward-facing conformation, with the catalytic motifs of the nucleotide-binding domains separated. This allosteric effect prevents the transporter from switching between the inward-facing and the outward-facing states, thus interfering with the alternating access and release mechanism.

Structure-function relationships in the HAMP and proximal signaling domains of the aerotaxis receptor Aer

Aer, the Escherichia coli aerotaxis receptor, faces the cytoplasm, where the PAS (Per-ARNT-Sim)-flavin adenine dinucleotide (FAD) domain senses redox changes in the electron transport system or cytoplasm. PAS-FAD interacts with a HAMP (histidine kinase, adenylyl cyclase, methyl-accepting protein, and phosphatase) domain to form an input-output module for Aer signaling. In this study, the structure of the Aer HAMP and proximal signaling domains was probed to elucidate structure-function relationships important for signaling. Aer residues 210 to 290 were individually replaced with cysteine and then cross-linked in vivo. The results confirmed that the Aer HAMP domain is composed of two alpha-helices separated by a structured loop. The proximal signaling domain consisted of two alpha-helices separated by a short undetermined structure. The Af1503 HAMP domain from Archaeoglobus fulgidus was recently shown to be a four-helix bundle. To test whether the Af1503 HAMP domain is a prototype for the Aer HAMP domain, the latter was modeled using coordinates from Af1503. Several findings supported the hypothesis that Aer has a four-helix HAMP structure: (i) cross-linking independently identified the same residues at the dimer interface that were predicted by the model, (ii) the rate of cross-linking for residue pairs was inversely proportional to the beta-carbon distances measured on the model, and (iii) clockwise lesions that were not contiguous in the linear Aer sequence were clustered in one region in the folded HAMP model, defining a potential site of PAS-HAMP interaction during signaling. In silico modeling of mutant Aer proteins indicated that the four-helix HAMP structure was important for Aer stability or maturation. The significance of the HAMP and proximal signaling domain structure for signal transduction is discussed.

Liposome-mediated assembly of receptor signaling complexes

The reconstitution of membrane-associated protein complexes poses significant experimental challenges. The core signaling complex in the bacterial chemotaxis system is an illustrative example: The soluble cytoplasmic signaling proteins CheW and CheA bind to heterogeneous clusters of transmembrane receptor proteins, resulting in an assembly that exhibits cooperative kinase regulation. An understanding of the basis for the cooperativity inherent in the receptor/CheW/CheA interaction, as well as other membrane phenomena, can benefit from functional studies under defined conditions. To meet this need, a simple method was developed to assemble functional complexes on lipid membranes. The method employs a receptor cytoplasmic domain fragment (CF) with a histidine tag and liposomes that contain a Ni(2+) -chelating lipid. Assemblies of CF, CheW, and CheA form spontaneously in the presence of these liposomes, which exhibit the salient biochemical functions of kinase stimulation, cooperative regulation, and CheR-mediated receptor methylation. Although ligand binding phenomena cannot be studied directly with this approach, other factors that influence kinase stimulation and receptor methylation can be explored systematically, including receptor density and competition among stimulating and inhibiting receptor domains. The template-directed assembly of proteins leads to relatively well-defined samples that are amenable to analysis by a number of methods, including light scattering, electron microscopy, and fluorescence resonance energy transfer. The approach promises to be applicable to many systems involving membrane-associated proteins.

Structure of the conserved HAMP domain in an intact, membrane-bound chemoreceptor: a disulfide mapping study

The HAMP domain is a conserved motif widely distributed in prokaryotic and lower eukaryotic organisms, where it is often found in transmembrane receptors that regulate two-component signaling pathways. The motif links receptor input and output modules and is essential to receptor structure and signal transduction. Recently, a structure was determined for a HAMP domain isolated from an unusual archeal membrane protein of unknown function [Hulko, M., et al. (2006) Cell 126, 929-940]. This study uses cysteine and disulfide chemistry to test this archeal HAMP model in the full-length, membrane-bound aspartate receptor of bacterial chemotaxis. The chemical reactivities of engineered Cys residues scanned throughout the aspartate receptor HAMP region are highly correlated with the degrees of solvent exposure of corresponding positions in the archeal HAMP structure. Both domains are homodimeric, and the individual subunits of both domains share the same helix-connector-helix organization with the same helical packing faces. Moreover, disulfide mapping reveals that the four helices of the aspartate receptor HAMP domain are arranged in the same parallel, four-helix bundle architecture observed in the archeal HAMP structure. One detectable difference is the packing of the extended connector between helices, which is not conserved. Finally, activity studies of the aspartate receptor indicate that contacts between HAMP helices 1 and 2' at the subunit interface play a critical role in modulating receptor on-off switching. Disulfide bonds linking this interface trap the receptor in its kinase-activating on-state, or its kinase inactivating off-state, depending on their location. Overall, the evidence suggests that the archeal HAMP structure accurately depicts the architecture of the conserved HAMP motif in transmembrane chemoreceptors. Both the on- and off-states of the aspartate receptor HAMP domain closely resemble the archeal HAMP structure, and only a small structural rearrangement occurs upon on-off switching. A model incorporating HAMP into the full receptor structure is proposed.

Tuning a bacterial chemoreceptor with protein-membrane interactions

Chemoreceptors in Escherichia coli are homodimeric transmembrane proteins that convert environmental stimuli into intracellular signals controlling flagellar motion. Chemoeffectors bind to the extracellular (periplasmic) domain of the receptors, whereas their cytoplasmic domain mediates signaling and adaptation. The second transmembrane helix (TM2) connects these two domains. TM2 contains an aliphatic core flanked by amphipathic aromatic residues that have specific affinity for polar-hydrophobic membrane interfaces. We previously showed that Trp-209, near the cytoplasmic end of TM2, helps maintain the normal baseline-signaling state of the aspartate chemoreceptor (Tar) and that Tyr-210 plays an auxiliary role in this control. We have now repositioned the Trp-209/Tyr-210 pair in single-residue increments about the cytoplasmic polar-hydrophobic interface. Changes from WY-2 to WY+1 modulate the baseline-signaling state of the receptor in predictable and incremental steps that can be compensated by adaptive methylation/demethylation. Greater displacements, as in WY-3, WY+2, and WY+3, bias the receptor to the off kinase-inhibiting state or the on kinase-stimulating state, respectively, to a degree that cannot be fully compensated by the adaptation system. Aromatic residues analogous to Trp-209/Tyr-210 are present in other chemoreceptors and many transmembrane sensor kinases, where they may serve a similar function.

Use of site-directed cysteine and disulfide chemistry to probe protein structure and dynamics: applications to soluble and transmembrane receptors of bacterial chemotaxis

Site-directed cysteine and disulfide chemistry is broadly useful in the analysis of protein structure and dynamics, and applications of this chemistry to the bacterial chemotaxis pathway have illustrated the kinds of information that can be generated. Notably, in many cases, cysteine and disulfide chemistry can be carried out in the native environment of the protein whether it be aqueous solution, a lipid bilayer, or a multiprotein complex. Moreover, the approach can tackle three types of problems crucial to a molecular understanding of a given protein: (1) it can map out 2 degrees structure, 3 degrees structure, and 4 degrees structure; (2) it can analyze conformational changes and the structural basis of regulation by covalently trapping specific conformational or signaling states; and (3) it can uncover the spatial and temporal aspects of thermal fluctuations by detecting backbone and domain dynamics. The approach can provide structural information for many proteins inaccessible to high-resolution methods. Even when a high-resolution structure is available, the approach provides complementary information about regulatory mechanisms and thermal dynamics in the native environment. Finally, the approach can be applied to an entire protein, or to a specific domain or subdomain within the full-length protein, thereby facilitating a divide-and-conquer strategy in large systems or multiprotein complexes. Rigorous application of the approach to a given protein, domain, or subdomain requires careful experimental design that adequately resolves the structural and dynamical information provided by the method. A full structural and dynamical analysis begins by scanning engineered cysteines throughout the region of interest. To determine 2 degrees structure, the solvent exposure of each cysteine is determined by measuring its chemical reactivity, and the periodicity of exposure is analyzed. To probe 3 degrees structure, 4 degrees structure, and conformational regulation, pairs of cysteines are identified that rapidly form disulfide bonds and that retain function when induced to form a disulfide bond in the folded protein or complex. Finally, to map out thermal fluctuations in a protein of known structure, disulfide formation rates are measured between distal pairs of nonperturbing surface cysteines. This chapter details these methods and illustrates applications to two proteins from the bacterial chemotaxis pathway: the periplasmic galactose binding protein and the transmembrane aspartate receptor.

Phenotypic Suppression Methods for Analyzing Intra‐ and Inter‐Molecular Signaling Interactions of Chemoreceptors

The receptors that mediate chemotactic behaviors in E. coli and other motile bacteria and archaea are exquisite molecular machines. They detect minute concentration changes in the organism's chemical environment, integrate multiple stimulus inputs, and generate a highly amplified output signal that modulates the cell's locomotor pattern. Genetic dissection and suppression analyses have played an important role in elucidating the molecular mechanisms that underlie chemoreceptor signaling. This chapter discusses three examples of phenotypic suppression analyses of receptor signaling defects. (i) Balancing suppression can occur in mutant receptors that have biased output signals and involves second-site mutations that create an offsetting bias change. Such suppressors can arise in many parts of the receptor and need not involve directly interacting parts of the molecule. (ii) Conformational suppression within a mutant receptor molecule occurs through a mutation that directly compensates for the initial structural defect. This form of suppression should be highly dependent on the nature of the structural alterations caused by the original mutation and its suppressor, but in practice may be difficult to distinguish from balancing suppression without high-resolution structural information about the mutant and pseudorevertant proteins. (iii) Conformational suppression between receptor molecules involves correction of a functional defect in one receptor by a mutational change in a heterologous receptor with which it normally interacts. The suppression patterns exhibit allele-specificity with respect to the compensatory residue positions and amino acid side chains, a hallmark of stereospecific protein-protein interactions.

Adaptational modification and ligand occupancy have opposite effects on positioning of the transmembrane signalling helix of a chemoreceptor

Sensory systems adapt to persistent stimulation. In the transmembrane receptors of bacterial chemotaxis, adaptation is mediated by methylation at specific glutamyl residues in the cytoplasmic domain. Methylation counteracts effects of ligand binding on functional activities of that domain. Both ligand binding and adaptational modification are thought to act through conformational changes. As characterized for Escherichia coli chemoreceptors, a mechanistically crucial feature of the ligand-induced conformational change is piston sliding towards the cytoplasm of a signalling helix in the periplasmic/transmembrane domain. Adaptational modification could counteract this signalling movement by blocking its influence on the cytoplasmic domain or by reversing it. To investigate, we characterized effects of adaptational modification on the position of the signalling helix in chemoreceptor Trg using rates of disulphide formation between introduced cysteines. We utilized an intact cell procedure in which receptors were in their native, functional state. In vivo rates of disulphide formation between diagnostic cysteine pairs spanning a signalling helix interface changed as a function of adaptational modification. Strikingly, those changes were opposite those caused by ligand occupancy for each diagnostic pair tested. This suggests that adaptational modification resets the receptor complex to its null state by reversal of the conformational change generated by ligand binding.

Control of chemotactic signal gain via modulation of a pre-formed receptor array

The remarkably wide dynamic range of the chemotactic pathway of Escherichia coli, a model signal transduction system, is achieved by methylation/amidation of the transmembrane chemoreceptors that regulate the histidine kinase CheA in response to extracellular stimuli. The chemoreceptors cluster at a cell pole together with CheA and the adaptor CheW. Several lines of evidence have led to models that assume high cooperativity and sensitivity via collaboration of receptor dimers within a cluster. Here, using in vivo disulfide cross-linking assays, we have demonstrated a well defined arrangement of the aspartate chemoreceptor (Tar). The differential effects of amidation on cross-linking at different positions indicate that amidation alters the relative orientation of Tar dimers to each other (presumably inducing rotational displacements) without much affecting the conformation of the periplasmic domains. Interestingly, the effect of aspartate on cross-linking at any position tested was roughly opposite to that of receptor amidation. Furthermore, amidation attenuated the effects of aspartate by several orders of magnitude. These results suggest that receptor covalent modification controls signal gain by altering the arrangement or packing of receptor dimers in a pre-formed cluster.

Evidence that the adaptation region of the aspartate receptor is a dynamic four-helix bundle: cysteine and disulfide scanning studies

The aspartate receptor is one of the ligand-specific, homodimeric chemoreceptors that detects extracellular attractants and triggers the chemotaxis pathway of Escherichia coli and Salmonella typhimurium. This receptor regulates the activity of the histidine kinase CheA, which forms a kinetically stable complex with the receptor cytoplasmic domain. An atomic four-helix bundle model has been constructed for this domain, which is functionally subdivided into the signaling and adaptation subdomains. The proposed four-helix bundle structure of the signaling subdomain, which binds CheA, is fully supported by experimental evidence. Much less evidence is available to test the four-helix bundle model of the adaptation subdomain, which possesses covalent adaptation sites and docking surfaces for adaptation enzymes. The present study focuses on a putative helix near the C terminus of the adaptation subdomain. To probe the structural and functional features of positions G467-A494 in this C-terminal region, a cysteine and disulfide scanning approach has been employed. Measurement of the chemical reactivities of scanned cysteines reveals an alpha-helical periodicity of exposed and buried residues, confirming alpha-helical secondary structure and mapping out a buried packing face. The effects of cysteine substitutions on activity in vivo and in vitro highlight the functional importance of the helix, especially its buried face. A scan for disulfide bond formation between symmetric pairs of engineered cysteines reveals promiscuous collisions between subunits, indicating the presence of significant thermal dynamics. A scan for functional disulfides reveals lock-on and signal-retaining disulfide bonds formed between symmetric pairs of cysteines at buried positions, indicating that the buried face of the helix lies near the subunit interface of the homodimer in the equilibrium structures of both the apo and aspartate-bound states where it plays a critical role in kinase regulation. These results strongly support the existing four-helix bundle model of the adaptation subdomain structure. A mechanistic model is proposed in which a signal is transmitted through the adaptation subdomain by a change in supercoiling of the four-helix bundle.

Bacterial histidine kinase as signal sensor and transducer

Adaptation to an environmental stress is essential for cell survival in all organisms, from E. coli to human. To respond to changes in their surroundings, bacteria utilize two-component systems (TCSs), also known as histidyl-aspartyl phosphorelay (HAP) systems that consist of a histidine kinase (HK) sensor and a cognate response regulator (RR). While mammals developed complex signaling systems involving serine/threonine/tyrosine kinases in stress response mechanisms, bacterial TCS/HAP systems represent a simple but elegant prototype of signal transduction machineries. HKs are known as a seductive target for anti-bacterial therapeutic development, because of their significance in pathological virulence in some bacteria such as Salmonella enterica. Recent molecular and structural studies have shed light on the molecular basis of the signaling mechanism of HK sensor kinases. This review will focus on recent advancements in structural investigation of signal sensing and transducing mechanisms by HKs, which is critical to our understanding of bacterial biology and pathology.

Siderophore Transport through Escherichia coli Outer Membrane Receptor FhuA with Disulfide-tethered Cork and Barrel Domains

The hydroxamate siderophore receptor FhuA is a TonB-dependent outer membrane protein of Escherichia coli composed of a C-terminal 22-stranded beta-barrel occluded by an N-terminal globular cork domain. During siderophore transport into the periplasm, the FhuA cork domain has been proposed to undergo conformational changes that allow transport through the barrel lumen; alternatively, the cork may be completely displaced from the barrel. To probe such changes, site-directed cysteine mutants in the cork domain (L109C and Q112C) and in the barrel domain (S356C and M383C) were created within the putative siderophore transport pathway. Molecular modeling predicted that the double cysteine mutants L109C/S356C and Q112C/M383C would form disulfide bonds, thereby tethering the cork and barrel domains. The double cysteine FhuA mutants were denatured under nonreducing conditions and fluorescently labeled with thiol-specific Oregon Green maleimide. Subsequent SDS-PAGE analysis revealed two distinct species: FhuA containing a disulfide bond and FhuA with free sulfhydryl groups. To address the role of the putative siderophore transport pathway and to evaluate possible rearrangements of the cork domain during ferricrocin transport, disulfide bond formation was enhanced by an oxidative catalyst. Cells containing double cysteine FhuA mutants that were subjected to oxidation during ferricrocin transport exhibited disulfide bond formation to near completion. After disulfide tethering of the cork to the barrel, ferricrocin transport was equivalent to transport by untreated cells. These results demonstrate that blocking the putative siderophore transport pathway does not abrogate ferricrocin uptake. We propose that, during siderophore transport through FhuA, the cork domain remains within the barrel rather than being displaced.

Adaptation mechanism of the aspartate receptor: electrostatics of the adaptation subdomain play a key role in modulating kinase activity

The aspartate receptor of the Escherichia coli and Salmonella typhimurium chemotaxis pathway generates a transmembrane signal that regulates the activity of the cytoplasmic kinase CheA. Previous studies have identified a region of the cytoplasmic domain that is critical to receptor adaptation and kinase regulation. This region, termed the adaptation subdomain, contains a high density of acidic residues, including specific glutamate residues that serve as receptor adaptation sites. However, the mechanism of signal propagation through this region remains poorly understood. This study uses site-directed mutagenesis to neutralize each acidic residue within the subdomain to probe the hypothesis that electrostatics in this region play a significant role in the mechanism of kinase activation and modulation. Each point mutant was tested for its ability to regulate chemotaxis in vivo and kinase activity in vitro. Four point mutants (D273N, E281Q, D288N, and E477Q) were found to superactivate the kinase relative to the wild-type receptor, and all four of these kinase-activating substitutions are located along the same intersubunit interface as the adaptation sites. These activating substitutions retained the wild-type ability of the attractant-occupied receptor to inhibit kinase activity. When combined in a quadruple mutant (D273N/E281Q/D288N/E477Q), the four charge-neutralizing substitutions locked the receptor in a kinase-superactivating state that could not be fully inactivated by the attractant. Similar lock-on character was observed for a charge reversal substitution, D273R. Together, these results implicate the electrostatic interactions at the intersubunit interface as a major player in signal transduction and kinase regulation. The negative charge in this region destabilizes the local structure in a way that enhances conformational dynamics, as detected by disulfide trapping, and this effect is reversed by charge neutralization of the adaptation sites. Finally, two substitutions (E308Q and E463Q) preserved normal kinase activation in vitro but blocked cellular chemotaxis in vivo, suggesting that these sites lie within the docking site of an adaptation enzyme, CheR or CheB. Overall, this study highlights the importance of electrostatics in signal transduction and regulation of kinase activity by the cytoplasmic domain of the aspartate receptor.

A large hinge bending domain rotation is necessary for the catalytic function of Escherichia coli 5'-nucleotidase

Two variants of Escherichia coli 5'-nucleotidase with disulfide bridges that were engineered to link the two domains of the protein were used to demonstrate that a large domain rotation is required for the catalytic mechanism of the enzyme. Kinetic analysis demonstrates that the variant trapped in the open form is almost inactive but can be activated up to 250-fold by reduction of the disulfide bridge. The second variant can adopt a closed but also a half-open conformation despite the presence of the cystine linkage. As a result of this flexibility, the mutant is still active in its oxidized state, although it shows a more pronounced substrate inhibition than the wild-type protein. A theoretical model is proposed that allows estimation of the flexibility of the proteins in the presence of the disulfide domain cross-link. Despite the unexpected residual flexibility of the trapped mutants, the enzymes could be used as conformational reporters in CD spectroscopy, revealing that the wild-type protein exists predominantly in an open conformation in solution. The kinetic, spectroscopic, and theoretical data are brought together to discuss the domain rotation in terms of the kinetic functioning of E. coli 5'-nucleotidase.

Role of predicted transmembrane domains for type III translocation, pore formation, and signaling by the Yersinia pseudotuberculosis YopB protein

YopB is a 401-amino-acid protein that is secreted by a plasmid-encoded type III secretion system in pathogenic Yersinia species. YopB is required for Yersinia spp. to translocate across the host plasma membrane a set of secreted effector proteins that function to counteract immune signaling responses and to induce apoptosis. YopB contains two predicted transmembrane helices (residues 166 to 188 and 228 to 250) that are thought to insert into the host plasma membrane during translocation. YopB is also required for pore formation and host-cell-signaling responses to the type III machinery, and these functions of YopB may also require membrane insertion. To elucidate the importance of membrane insertion for YopB function, YopB proteins containing helix-disrupting double consecutive proline substitutions in the center of each transmembrane domain were constructed. Yersinia pseudotuberculosis strains expressing the mutant YopB proteins were used to infect macrophages or epithelial cells. Effector translocation, pore formation, and host-cell-signaling responses were studied. Introduction of helix-disrupting substitutions into the second transmembrane domain of YopB resulted in a nonfunctional protein that was not secreted by the type III machinery. Introduction of helix-disrupting substitutions into the first transmembrane domain of YopB resulted in a protein that was fully functional for secretion and for interaction with YopD, another component of the translocation machinery. However, the YopB protein with helix-disrupting substitutions in the first transmembrane domain was partially defective for translocation, pore formation, and signaling, suggesting that all three functions of YopB involve insertion into host membrane.

Tryptophan residues flanking the second transmembrane helix (TM2) set the signaling state of the Tar chemoreceptor

The chemoreceptors of Escherichia coli are homodimeric membrane proteins that cluster in patches near the cell poles. They convert environmental stimuli into intracellular signals that control flagellar rotation. The functional domains of a receptor are physically separated by the cell membrane. Chemoeffectors bind to the extracellular (periplasmic) domain, and the cytoplasmic domain mediates signaling and adaptation. These two domains communicate through the second transmembrane helix (TM2) that connects them. In the high-abundance receptors Tar and Tsr, TM2 is flanked by tryptophan residues, which should localize preferentially to the interfacial zone between the polar and hydrophobic layers of the phospholipid bilayer. To investigate the functional significance of the Trp residues that flank TM2 of Tar, we used site-directed mutagenesis to generate the W192A and W209A substitutions. The W192A protein retains full activity in vivo and in vitro, but it increases the K(i) for aspartate in the in vitro assay 3-fold. The W209A replacement eliminates receptor-mediated stimulation of CheA in vitro, and it leads to an increased level of adaptive methylation in vivo. This phenotype in some respects mimics the changes seen upon binding aspartate. Since the W209A substitution may cause the C-terminus of TM2 to protrude farther into the cytoplasm, these results reinforce the hypothesis that aspartate binding causes a similar displacement. Moving Trp to each position from residue 206 to residue 212 generated a wide variety of Tar signaling states that are generally consistent with the predictions of the piston model of transmembrane signaling. None of these receptors was completely locked in one signaling mode, although most showed pronounced signaling biases. Our findings suggest that the Trp residues flanking TM2, especially Trp-209, are important in setting the baseline activity and ligand sensitivity of the Tar receptor. We also conclude that the Tyr-210 residue plays at least an auxiliary role in this control.

Interactions between the PAS and HAMP domains of the Escherichia coli aerotaxis receptor Aer

The Escherichia coli energy-sensing Aer protein initiates aerotaxis towards environments supporting optimal cellular energy. The Aer sensor is an N-terminal, FAD-binding, PAS domain. The PAS domain is linked by an F1 region to a membrane anchor, and in the C-terminal half of Aer, a HAMP domain links the membrane anchor to the signaling domain. The F1 region, membrane anchor, and HAMP domain are required for FAD binding. Presumably, alterations in the redox potential of FAD induce conformational changes in the PAS domain that are transmitted to the HAMP and C-terminal signaling domains. In this study we used random mutagenesis and intragenic pseudoreversion analysis to examine functional interactions between the HAMP domain and the N-terminal half of Aer. Missense mutations in the HAMP domain clustered in the AS-2 alpha-helix and abolished FAD binding to Aer, as previously reported. Three amino acid replacements in the Aer-PAS domain, S28G, A65V, and A99V, restored FAD binding and aerotaxis to the HAMP mutants. These suppressors are predicted to surround a cleft in the PAS domain that may bind FAD. On the other hand, suppression of an Aer-C253R HAMP mutant was specific to an N34D substitution with a predicted location on the PAS surface, suggesting that residues C253 and N34 interact or are in close proximity. No suppressor mutations were identified in the F1 region or membrane anchor. We propose that functional interactions between the PAS domain and the HAMP AS-2 helix are required for FAD binding and aerotactic signaling by Aer.

Dynamic Motions of CD39 Transmembrane Domains Regulate and Are Regulated by the Enzymatic Active Site†

The two transmembrane domains flanking the active site of CD39 regulate its activity, but little is known about the structural and dynamic features underlying their importance. Here we use a disulfide crosslinking strategy to examine transmembrane helix interactions and dynamics and to correlate these features with activity and substrate binding. We find strong intrasubunit TM1-TM2 interactions, as well as TM1-TM1' and TM2-TM2' interactions between dimer subunits, near the extracellular side of the membrane but only weak interactions near the cytoplasmic end. The specific helix faces that constitute each interface are highly flexible, indicating a significant degree of rotational mobility within the packed structure. Analysis of activity after locking the helices in various orientations via disulfide bonds suggests that not only the arrangement but also the ability of the helices to move relative to each other is crucial for enzyme function. Helix mobility is in turn modulated by substrate binding. These results suggest that rather than playing a static structural role to support an optimal active site conformation, the transmembrane domains undergo dynamic motions that underlie their functional relationship with the active site.

Position and ionization state of Asp in the core of membrane-inserted alpha helices control both the equilibrium between transmembrane and nontransmembrane helix topography and transmembrane helix positioning

The behavior of model-membrane-inserted polyLeu-rich peptides containing Asp residues located at various positions in their hydrophobic core was investigated. The topography of the bilayer-inserted alpha helices formed by these peptides was evaluated by measuring the emission lambda(max) and quenching the fluorescence of a Trp at the center of the peptide sequence. When Asp residues were protonated (at low pH), peptides that were incorporated into vesicles composed of dioleoylphosphatidylcholine (DOPC) adopted a topography in which the polyLeu sequence predominantly formed a normal transmembrane (TM) helix. When Asp residues were ionized (at neutral or high pH), topography was altered in a manner that would allow the charged Asp residues to reside near the bilayer surface. In DOPC vesicles, most peptides repositioned so that the longest segment of consecutive hydrophobic residues (12 residue minimum) formed a truncated/shifted TM structure. However, peptides with one or two charged Asp residues close to the center of the hydrophobic sequence and thus lacking even a 12-residue continuous hydrophobic segment, formed a helical non-TM state locating near the bilayer surface. At low pH, incorporation of the peptides into thicker bilayers composed of dierucoylphosphatidylcholine (DEuPC) resulted in the formation of a mixture of the normal TM state and the non-TM helical state located near the bilayer surface. In DEuPC vesicles at high pH, the non-TM state tended to predominate. How Asp-ionization-dependent shifts in helix topography may regulate the function of membrane proteins exposed to environments with differing pH in vivo (e.g., endosomes) is discussed.

The HAMP linker in histidine kinase dimeric receptors is critical for symmetric transmembrane signal transduction

The HAMP linker, a common structural element between a sensor and a transmitter module in various sensor proteins, plays an essential role in signal transduction. Here, by in vivo complementation experiments with Tar-EnvZ hybrid receptor mutants in which the HAMP linker forms a heterodimer with Tar and EnvZ-type subunits, we found that mutations at one linker only affect the function of EnvZ in the same subunit. However, the same mutations affect the EnvZ function of both subunits when only a Tar or EnvZ-type HAMP linker is used. These results suggest that intersubunit interactions in the HAMP linker normally mediate signal transduction through both subunits in a sensor dimer, whereas the signal is asymmetrically transduced through the linker in a heterodimer. This is the first demonstration that two HAMP linkers in a sensor dimer are functionally coupled for normal signal transduction; however, this functional coupling can be reduced when the HAMP linkers lose their symmetric nature.

Side chains at the membrane-water interface modulate the signaling state of a transmembrane receptor

Previous model studies of peptides and proteins have shown that protein-lipid interactions, primarily involving amino acid side chains near the membrane-water interface, modulate the position of transmembrane helices in bilayers. The present study examines whether such interfacial side chains stabilize the signaling states of a transmembrane signaling helix in a representative receptor, the aspartate receptor of bacterial chemotaxis. To examine the functional roles of signaling helix side chains at the periplasmic and cytoplasmic membrane-water interfaces, arginine and cysteine substitutions were scanned through these two interfacial regions. The chemical reactivities of the cysteine residues were first measured to determine the positions at which the helix crosses the membrane-water interface in both the periplasmic and cytoplasmic compartments. Subsequently, two antisymmetric in vitro activity measurements were carried out to determine the effect of each interfacial arginine or cysteine substitution on receptor signaling. Substitutions that stabilize the receptor on-state cause upregulation of receptor-coupled kinase activity and inhibition of methylation at receptor adaptation sites, while substitutions that stabilize the off-state have the opposite effects on these two activities. Notably, four substitutions at aromatic tryptophan and phenylalanine positions buried in the membrane near the membrane-water interface were found to stabilize the native on- or off-signaling state. The striking ability of these substitutions to drive the receptor toward a specific signaling state indicates that interfacial side chains are highly optimized to correctly position the native signaling helix in the membrane and to allow normal switching between the on- and off-signaling states. The analogous substitutions in model transmembrane helices are known to drive small piston-type displacements of the helix normal to the membrane. Thus, the simplest molecular interpretation of the present findings is that the signal-stabilizing substitutions drive piston displacements of the signaling helix, providing further support for the piston model for transmembrane signaling in bacterial chemoreceptors. More generally, the findings indicate that the interfacial phenylalanine, tryptophan, and arginine side chains widespread in the transmembrane alpha-helices of receptors, channels, and transporters can play important roles in modulating transitions between signaling and conformational states.

Attractant binding alters arrangement of chemoreceptor dimers within its cluster at a cell pole

Many sensory systems involve multiple steps of signal amplification to produce a significant response. One such mechanism may be the clustering of transmembrane receptors. In bacterial chemotaxis, where a stoichiometric His-Asp phosphorelay from the kinase CheA to the response regulator CheY plays a central role, the chemoreceptors (methyl-accepting chemotaxis proteins) cluster together with CheA and the adaptor CheW, at a pole of a rod-shaped cell. This clustering led to a proposal that signal amplification occurs through an interaction between chemoreceptor homodimers. Here, by using in vivo disulfide crosslinking assays, we examined an interdimer interaction of the aspartate chemoreceptor (Tar). Two cysteine residues were introduced into Tar: one at the subunit interface and the other at the external surface of the dimer. Crosslinked dimers and higher oligomers (especially a deduced hexamer) were detected and their abundance depended on CheA and CheW. The ligand aspartate significantly reduced the amounts of higher oligomers but did not affect the polar localization of Tar-GFP. Thus, the binding of aspartate alters the rate of collisions between Tar dimers in assembled signaling complexes, most likely due to a change in the relative positions or trajectories of the dimers. These collisions could occur within a trimer-ofdimers predicted by crystallography, or between such trimers. These results are consistent with the proposal that the interaction of chemoreceptor dimers is involved in signal transduction.

Folding of a monomeric porin, OmpG, in detergent solution

OmpG, a porin from E. coli, has been examined in planar lipid bilayers and in detergent solution. First, bilayer recordings were used to reinforce the evidence that the functional form of OmpG is a monomer. Both pH-dependent gating and blockade by covalent modification add support to this proposal. The findings contrast with the properties of the classical porins, which function as trimers. Second, the folding of OmpG in detergent solution was examined. A water-soluble form of OmpG was obtained by dialysis from denaturant into buffer. Incubation of water-soluble OmpG in detergent results in conversion to a form that possesses the hallmarks of a beta barrel. The folding of water-soluble OmpG in detergent was monitored by circular dichroism, protease resistance, and heat modifiability. OmpG is first transformed into an intermediate with increased beta-sheet content on the time scale of minutes at 23 degrees C. This is followed by the slow acquisition of heat modifiability and protease resistance over several hours. The formation of a beta barrel during this period was demonstrated in a double cysteine mutant by using intramolecular disulfide bond formation to report N and C terminus proximity. Finally, conditions are presented for folding OmpG with greater than 90% efficiency, thereby paving the way for structural studies.

Quantitative analysis of aspartate receptor signaling complex reveals that the homogeneous two-state model is inadequate: development of a heterogeneous two-state model

The two-state model of receptor activation, in which a receptor population exists in equilibrium between a single on-state and a single off-state, has long been considered a viable model for the signaling behavior of bacterial chemoreceptors. Here, we show that this simple, homogeneous two-state model is adequate for a pure receptor population with just one adaptation state, but fails to account quantitatively for the observed linear relationship between the apparent attractant affinity (K(1/2)) and kinase activity (V(obs)(apo)) as the adaptation state is varied. Further analysis reveals that the available data are instead consistent with a heterogeneous two-state model in which covalent modification of receptor adaptation sites changes the microscopic properties of the on-state or off-state. In such a system, each receptor molecule retains a single on-state and off-state, but covalent adaptation generates a heterogeneous population of receptors exhibiting a range of different on-states or off-states with different microscopic parameters and conformations. It follows that covalent adaptation transforms the receptor from a simple, two-state toggle switch into a variable switch. In order to identify the microscopic parameters most sensitive to covalent adaptation, six modified, two-state models were examined in which covalent adaptation alters a different microscopic parameter. The analysis suggests that covalent adaptation primarily alters the ligand-binding affinity of the receptor off-state (K(D1)). By contrast, models in which covalent adaptation alters the ligand-binding affinity of the receptor on-state, the maximal kinase stimulation of the on-state or off-state, cooperative interactions between receptors, or the assembly of the receptor-kinase signaling complex are inconsistent with the available evidence. Overall, the findings support a heterogeneous two-state model in which modification of the receptor adaptation sites generates a population of receptors with heterogeneous off-states differing in their attractant affinities. In the process of testing the effects of covalent adaptation on the assembly of the receptor-kinase signaling complex, a new method for estimating the stoichiometric ratio of receptor and CheA in the ternary signaling complex was devised. This method suggests that the ratio of receptor dimers to CheA dimers in the assembled complex is 6:1 or less.

Conformational changes in Kir2.1 channels during NH4+-induced inactivation

We have shown previously that NH(4)(+) binding to the external pore of a Kir2.1 channel induces channel inactivation possibly through conformational changes. In this study, we performed further biophysical analyses of the NH(4)(+)-induced inactivation modeled by a refined kinetic scheme. Also, we investigated the conformational change hypothesis by examining whether the chemical modification of single-cysteine substitution of amino acids located at the internal pore alters the kinetics of the NH(4)(+)-induced inactivation. In addition, we examined whether the mutation of amino acids located at various parts of a Kir2.1 channel influences the NH(4)(+)-induced inactivation. Kir2.1 channels were expressed in Xenopus oocytes and studied using patch-clamp techniques. The gating of the NH(4)(+)-induced inactivation was affected by mutation of several amino acids located at various regions of the Kir2.1 channel. These results suggest that amino acids from different parts of a Kir2.1 channel are involved in the channel closure. Furthermore, internal chemical modification of several cysteine mutants resulted in the block of inward currents and changes in the on and off rate for the NH(4)(+)-induced inactivation, suggesting that the internal pore mouth is involved in the closure of a Kir2.1 channel. Taken together these results provide new evidence for conformational changes affecting the NH(4)(+)-induced inactivation in the Kir2.1 channel.

Depolarization induces intersubunit cross-linking in a S4 cysteine mutant of the Shaker potassium channel

Voltage-gated potassium (K(v)) channels are integral membrane proteins, composed of four subunits, each comprising six (S1-S6) transmembrane segments. S1-S4 comprise the voltage-sensing domain, and S5-S6 with the linker P-loop forms the ion conducting pore domain. During activation, S4 undergoes structural rearrangements that lead to the opening of the channel pore and ion conduction. To obtain details of these structural changes we have used the engineered disulfide bridge approach. For this we have introduced the L361C mutation at the extracellular end of S4 of the Shaker K channel and expressed the mutant channel in Xenopus oocytes. When exposed to mild oxidizing conditions (ambient oxygen or copper phenanthroline), Cys-361 formed an intersubunit disulfide bridge as revealed by the appearance of a dimeric band on Western blotting. As a consequence, the mutant channel suffered a significant loss in conductance (measured by two-electrode voltage clamp). Removal of native cysteines failed to prevent the disulfide formation, indicating that Cys-361 forms a disulfide with its counterpart in the neighboring subunit. The effect was voltage-dependent and occurred during channel activation after Cys-361 has been exposed to the extracellular phase. Although the disulfide bridge reduced the maximal conductance, it caused a hyperpolarizing shift in the conductance-voltage relationship and reduced the deactivation kinetics of the channel. The latter two effects suggest stabilization of the open state of the channel. In conclusion, we report that during activation the intersubunit distance between the N-terminal ends of the S4 segments of the L361C mutant Shaker K channel is reduced.

Site-directed spin labeling of a bacterial chemoreceptor reveals a dynamic, loosely packed transmembrane domain

We used site-directed spin labeling and electron paramagnetic resonance spectroscopy to investigate dynamics and helical packing in the four-helix transmembrane domain of the homodimeric bacterial chemoreceptor Trg. We focused on the first transmembrane helix, TM1, particularly on the nine-residue sequence nearest the periplasm, because patterns of disulfide formation between introduced cysteines had identified that segment as the region of closest approach among neighboring transmembrane helices. Along this sequence, mobility and accessibility of the introduced spin label were characteristic of loosely packed or solvent-exposed side chains. This was also the case for eight additional positions around the circumference and along the length of TM1. For the continuous nine-residue sequence near the periplasm, mobility and accessibility varied only modestly as a function of position. We conclude that side chains of TM1 that face the interior of the four-helix domain interact with neighboring helices but dynamic movement results in loose packing. Compared to transmembrane segments of other membrane proteins reconstituted into lipid bilayers and characterized by site-directed spin labeling, TM1 of chemoreceptor Trg is the most dynamic and loosely packed. A dynamic, loosely packed chemoreceptor domain can account for many experimental observations about the transmembrane domains of chemoreceptors.