Cloning and membrane topology of a P type ATPase from Helicobacter pylori

Phellodendron chinense C.K.Schneid: An in vitro study on its anti-Helicobacter pylori effect

ETHNOPHARMACOLOGICAL RELEVANCE

Phellodendron chinense C.K.Schneid(P. chinense Schneid) is known in TCM as Huang Bo, is traditionally used to support gastrointestinal function and alleviate stomach-related ailments, including gastric ulcer bleeding and symptoms of gastroesophageal reflux disease. Helicobacter pylori (H. pylori) is classified by the WHO as a Group 1 carcinogen. However, the specific activity and mechanism of action of P. chinense Schneid against H. pylori infection remain unclear. It has been noted that Huangjiu processing may alter the bitter and cold properties of P. chinense Schneid, but its effect on antimicrobial activity requires further investigation. Additionally, it remains uncertain whether berberine is the sole antimicrobial active component of P. chinense Schneid.

AIM OF STUDY

This study aims to elucidate the anti-H. pylori infection activity of P. chinense Schneid, along with its mechanism of action and key antimicrobial active components.

MATERIALS AND METHODS

Phytochemical analysis was carried out by UPLC-MS/MS. HPLC was employed to quantify the berberine content of the extracts. Antimicrobial activity was assessed using the micro broth dilution method. Morphology was observed using SEM. The impact on urease activity was analyzed through in vitro urease enzyme kinetics. RT-qPCR was employed to detect the expression of virulence genes, including adhesin, flagellum, urease, and cytotoxin-related genes. The adhesion effect was evaluated by immunofluorescence staining and agar culture.

RESULTS

P. chinense Schneid exhibited strong antimicrobial activity against both antibiotic-sensitive and resistant H. pylori strains, with MIC ranging from 40 to 160 μg/mL. Combination with amoxicillin, metronidazole, levofloxacin, and clarithromycin did not result in antagonistic effects. P. chinense Schneid induced alterations in bacterial morphology and structure, downregulated the expression of various virulence genes, and inhibited urease enzyme activity. In co-infection systems, P. chinense Schneid significantly attenuated H. pylori adhesion and urease relative content, thereby mitigating cellular damage caused by infection. Huangjiu processing enhanced the anti-H. pylori activity of P. chinense Schneid. Besides berberine, P. chinense Schneid contained seven other components with anti-H. pylori activity, with palmatine exhibiting the strongest activity, followed by jatrorrhizine.

CONCLUSIONS

This study sheds light on the potential therapeutic mechanisms of P. chinense Schneid against H. pylori infection, demonstrating its capacity to disrupt bacterial structure, inhibit urease activity, suppress virulence gene transcription, inhibit adhesion, and protect host cells. The anti-H. pylori activity of P. chinense Schneid was potentiated by Huangjiu processing, and additional components beyond berberine were identified as possessing strong anti-H. pylori activity. Notably, jatrorrhizine, a core component of P. chinense Schneid, exhibited significant anti-H. pylori activity, marking a groundbreaking discovery.

Co-immobilized Alcohol Dehydrogenase and Glucose Dehydrogenase with Resin Extraction for Continuous Production of Chiral Diaryl Alcohol

Ni²⁺-functionalized porous ceramic/agarose composite beads (Ni-NTA Cerose) can be used as carrier materials to immobilize enzymes harboring a metal affinity tag. Here, a 6×His-tag fusion alcohol dehydrogenase Mu-S5 and glucose dehydrogenase from Bacillus megaterium (BmGDH) were co-immobilized on Ni-NTA Cerose to construct a packed bed reactor (PBR) for the continuous synthesis of the chiral intermediate (S)-(4-chlorophenyl)-(pyridin-2-yl) methanol ((S)-CPMA) NADPH recycling, and in situ product adsorption was achieved simultaneously by assembling a D101 macroporous resin column after the PBR. Using an optimum enzyme activity ratio of 2:1 (Mu-S5: BmGDH) and hydroxypropyl-β-cyclodextrin as co-solvent, a space-time yield of 1560 g/(L·d) could be achieved in the first three days at a flow rate of 5 mL/min and substrate concentration of 10 mM. With simplified selective adsorption and extraction procedures, (S)-CPMA was obtained in 84% isolated yield.

Autoantibodies to a specific peptide epitope of human Hsp60 (ATVLA) with homology to Helicobacter pylori HspB in H. pylori-infected patients

Helicobacter pylori (Hp) may initiate autoimmunity as a result of molecular mimicry. The aim of this study was to compare the level of IgG antibodies to a specific epitope (P1 peptide) of human heat shock protein (Hsp)60 homologous to Hp Hsp60 (HspB) in the sera of healthy donors (HD), patients with Hp-related gastritis or coronary heart disease (CHD), uninfected or with Hp infection confirmed by rapid urease test, histological examination (dyspeptic patients) the ¹³ C urea breath test (¹³ C UBT), and anti-Hp antibodies (healthy donors, CHD patients). The Anti-P1 IgG induction by Hp was verified by adsorption of sera with these bacteria and by experimental immunization of Caviae porcellus with Hp. Cytokine secretion by THP-1Blue™ monocytes in response to P1 was also assessed. Anti-P1 antibodies were detected in patients with gastritis or CHD infected with Hp and they were not found in uninfected individuals or asymptomatic carriers. No antibodies were raised against P2 in any group. Reduced cross-reactivity to P1 was exhibited by sera adsorbed with Hp. Caviae porcellus infected with Hp produced anti-P1 autoantibodies. THP-1XBlue™ monocytes responded to P1 by production of proinflammatory cytokines. Autoantibodies against P1 in Hp-positive patients with gastritis or CHD and upregulation of proinflammatory cytokines by P1 may contribute to the pathogenesis of Hp infection.

Molecular mimicry in Helicobacter pylori infections

Gram-negative bacteria Helicobacter pylori (H. pylori) colonize gastric mucosa in humans and increase the risk of serious diseases such as gastric and duodenal ulcers, stomach cancers and mucosa associated lymphoid tissue lymphoma. The role of H. pylori infection in the pathogenesis of several extragastric diseases has been suggested including immune thrombocytopenic purpura, iron deficiency anemia, vitamin D deficiency, cardiovascular diseases, diabetes mellitus and dermatological disorders. Also neurological diseases and even lung cancer have attracted researchers concern. The relation between H. pylori infection and a growth retardation in children has also been suggested. Many mechanisms of molecular mimicry between H. pylori and the host have been proposed as a pathogen strategy to manipulate the immune system of the host in order to remain unrecognized and avoid eradication. A lot of effort has been put into the demonstration of homologous sequences between H. pylori and host compounds. However, knowledge about how often autoantibodies or autoreactive T lymphocytes induced during H. pylori infections cause pathological disorders is insufficient. This review provides data on H. pylori antigenic mimicry and possible deleterious effects due to the induction of immune response to the components common to these bacteria and the host.

Diversity of the metal-transporting P1B-type ATPases

The P1B-ATPases are integral membrane proteins that couple ATP hydrolysis to metal cation transport. Widely distributed across all domains of life, these enzymes have been previously shown to transport copper, zinc, cobalt, and other thiophilic heavy metals. Recent data suggest that these enzymes may also be involved in nickel and/or iron transport. Here we have exploited large amounts of genomic data to examine and classify the various P1B-ATPase subfamilies. Specifically, we have combined new methods of data partitioning and network visualization known as Transitivity Clustering and Protein Similarity Networks with existing biochemical data to examine properties such as length, speciation, and metal-binding motifs of the P1B-ATPase subfamily sequences. These data reveal interesting relationships among the enzyme sequences of previously established subfamilies, indicate the presence of two new subfamilies, and suggest the existence of new regulatory elements in certain subfamilies. Taken together, these findings underscore the importance of P1B-ATPases in homeostasis of nearly every biologically relevant transition metal and provide an updated framework for future studies.

Lansoprazole Novel Effector Sites Revealed by Autoradiography: Relation to Helicobacter pylori, Colon, Esophagus and Others

Lansoprazole uptake sites by two kinds of autoradiographic procedures were compared with recent literature. The uptake sites have been seen in the Helicobacter pylori, colonic epithelial cells, inflammatory cells, peripheral autonomic nerves and enterochromaffinlike cells as well as gastric parietal cells. Each uptake sites corresponded to the reported localization of P-type ATPase or acidic compartment.

A Multicopper oxidase (Cj1516) and a CopA homologue (Cj1161) are major components of the copper homeostasis system of Campylobacter jejuni

Metal ion homeostasis mechanisms in the food-borne human pathogen Campylobacter jejuni are poorly understood. The Cj1516 gene product is homologous to the multicopper oxidase CueO, which is known to contribute to copper tolerance in Escherichia coli. Here we show, by optical absorbance and electron paramagnetic resonance spectroscopy, that purified recombinant Cj1516 contains both T1 and trinuclear copper centers, which are characteristic of multicopper oxidases. Inductively coupled plasma mass spectrometry revealed that the protein contained approximately six copper atoms per polypeptide. The presence of an N-terminal "twin arginine" signal sequence suggested a periplasmic location for Cj1516, which was confirmed by the presence of p-phenylenediamine (p-PD) oxidase activity in periplasmic fractions of wild-type but not Cj1516 mutant cells. Kinetic studies showed that the pure protein exhibited p-PD, ferroxidase, and cuprous oxidase activities and was able to oxidize an analogue of the bacterial siderophore anthrachelin (3,4-dihydroxybenzoate), although no iron uptake impairment was observed in a Cj1516 mutant. However, this mutant was very sensitive to increased copper levels in minimal media, suggesting a role in copper tolerance. This was supported by increased expression of the Cj1516 gene in copper-rich media. A mutation in a second gene, the Cj1161c gene, encoding a putative CopA homologue, was also found to result in copper hypersensitivity, and a Cj1516 Cj1161c double mutant was found to be more copper sensitive than either single mutant. These observations and the apparent lack of alternative copper tolerance systems suggest that Cj1516 (CueO) and Cj1161 (CopA) are major proteins involved in copper homeostasis in C. jejuni.

Membrane structure of CtrA3, a copper-transporting P-type-ATPase from Aquifex aeolicus

We have produced and characterized two new copper-transporting ATPases, CtrA2 and CtrA3 from Aquifex aeolicus, that belong to the family of heavy metal ion-transporting P(IB)-type ATPases. CtrA2 has a CPC metal-binding sequence in TM6 and a CxxC metal-binding N-terminal domain, while CtrA3 has a CPH metal-binding motif in TM6 and a histidine-rich N-terminal metal-binding domain. We have cloned both copper pumps, expressed them in Escherichia coli and characterized them functionally. CtrA2 is activated by Ag(+) and Cu(+) and presumably transports reduced Cu(+), while CtrA3 is activated by, and presumably transports, the oxidized copper ion. Both CtrA2 and CtrA3 are thermophilic proteins with an activity maximum at 75 degrees C. Electron cryomicroscopy of two-dimensional crystals of CtrA3 yielded a projection map at approximately 7 A resolution with density peaks, indicating eight membrane-spanning alpha-helices per monomer. A fit of the Ca-ATPase structure to the projection map indicates that the arrangement of the six central helices surrounding the ion-binding site in the membrane is conserved, and suggests the position of the two additional N-terminal transmembrane helices that are characteristic of the heavy metal, eight-helix P(1B)-type ATPases.

Delivery of the Cu-transporting ATPase ATP7B to the plasma membrane in Xenopus oocytes

Cu-transporting ATPase ATP7B (Wilson disease protein) is essential for the maintenance of intracellular copper concentration. In hepatocytes, ATP7B is required for copper excretion, which is thought to occur via a transient delivery of the ATP7B- and copper-containing vesicles to the apical membrane. The currently available experimental systems do not allow analysis of ATP7B at the cell surface. Using epitope insertion, we identified an extracellular loop into which the HA-epitope can be introduced without inhibiting ATP7B activity. The HA-tagged ATP7B was expressed in Xenopus oocytes and the presence of ATP7B at the plasma membrane was demonstrated by electron microscopy, freeze-fracture experiments, and surface luminescence measurements in intact cells. Neither the deletion of the entire N-terminal copper-binding domain nor the inactivating mutation of catalytic Asp1027 affected delivery to the plasma membrane of oocytes. In contrast, surface targeting was decreased for the ATP7B variants with mutations in the ATP-binding site or the intra-membrane copper-binding site, suggesting that ligand-stabilized conformation(s) are important for ATP7B trafficking. The developed system provides significant advantages for studies that require access to both sides of ATP7B in the membrane.

Metal-responsive gene regulation and metal transport in Helicobacter species

Helicobacter species are among the most successful colonizers of the mammalian gastrointestinal and hepatobiliary tract. Colonization is usually lifelong, indicating that Helicobacter species have evolved intricate mechanisms of dealing with stresses encountered during colonization of host tissues, like restriction of essential metal ions. The recent availability of genome sequences of the human gastric pathogen Helicobacter pylori, the murine enterohepatic pathogen Helicobacter hepaticus and the unannotated genome sequence of the ferret gastric pathogen Helicobacter mustelae has allowed for comparative genome analyses. In this review we present such analyses for metal transporters, metal-storage and metal-responsive regulators in these three Helicobacter species, and discuss possible contributions of the differences in metal metabolism in adaptation to the gastric or enterohepatic niches occupied by Helicobacter species.

Activation of Archaeoglobus fulgidus Cu+-ATPase CopA by cysteine

CopA, a thermophilic ATPase from Archaeoglobus fulgidus, drives the outward movement of Cu(+) across the cell membrane. Millimolar concentration of Cys dramatically increases ( congruent with 800%) the activity of CopA and other P(IB)-type ATPases (Escherichia coli ZntA and Arabidopsis thaliana HMA2). The high affinity of CopA for metal ( congruent with 1 microM) together with the low Cu(+)-Cys K(D) (<10(-10)M) suggested a multifaceted interaction of Cys with CopA, perhaps acting as a substitute for the Cu(+) chaperone protein present in vivo. To explain the activation by the amino acid and further understand the mechanism of metal delivery to transport ATPases, Cys effects on the turnover and partial reactions of CopA were studied. 2-20 mM Cys accelerates enzyme turnover with little effect on CopA affinity for Cu(+), suggesting a metal independent activation. Furthermore, Cys activates the p-nitrophenyl phosphatase activity of CopA, even though this activity is metal independent. Cys accelerates enzyme phosphorylation and the forward dephosphorylation rates yielding higher steady state phosphoenzyme levels. The faster dephosphorylation would explain the higher enzyme turnover in the presence of Cys. The amino acid has no significant effect on low affinity ATP K(m) suggesting no changes in the E(1)<-->E(2) equilibrium. Characterization of Cu(+) transport into sealed vesicles indicates that Cys acts on the cytoplasmic side of the enzyme. However, the Cys activation of truncated CopA lacking the N-terminal metal binding domain (N-MBD) indicates that activation by Cys is independent of the regulatory N-MBD. These results suggest that Cys is a non-essential activator of CopA, interacting with the cytoplasmic side of the enzyme while this is in an E1 form. Interestingly, these effects also point out that Cu(+) can reach the cytoplasmic opening of the access path into the transmembrane transport sites either as a free metal or a Cu(+)-Cys complex.

The structure and function of heavy metal transport P1B-ATPases

P(1B)-type ATPases transport heavy metals (Cu+, Cu2+, Zn2+, Co2+, Cd2+, Pb2+) across membranes. Present in most organisms, they are key elements for metal homeostasis. P(1B)-type ATPases contain 6-8 transmembrane fragments carrying signature sequences in segments flanking the large ATP binding cytoplasmic loop. These sequences made possible the differentiation of at least four P(1B)-ATPase subgroups with distinct metal selectivity: P(1B-1): Cu+, P(1B-2): Zn2+, P(1B-3): Cu2+, P(1B-4): Co2+. Mutagenesis of the invariant transmembrane Cys in H6, Asn and Tyr in H7 and Met and Ser in H8 of the Archaeoglobus fulgidus Cu+-ATPase has revealed that their side chains likely coordinate the metals during transport and constitute a central unique component of these enzymes. The structure of various cytoplasmic domains has been solved. The overall structure of those involved in enzyme phosphorylation (P-domain), nucleotide binding (N-domain) and energy transduction (A-domain), appears similar to those described for the SERCA Ca2+-ATPase. However, they show different features likely associated with singular functions of these proteins. Many P(1B)-type ATPases, but not all of them, also contain a diverse arrangement of cytoplasmic metal binding domains (MBDs). In spite of their structural differences, all N- and C-terminal MBDs appear to control the enzyme turnover rate without affecting metal binding to transmembrane transport sites. In addition, eukaryotic Cu+-ATPases have multiple N-MBD regions that participate in the metal dependent targeting and localization of these proteins. The current knowledge of structure-function relationships among the different P(1B)-ATPases allows for a description of selectivity, regulation and transport mechanisms. Moreover, it provides a framework to understand mutations in human Cu+-ATPases (ATP7A and ATP7B) that lead to Menkes and Wilson diseases.

Topology of the Type IIa Na+/Pi Cotransporter

The type IIa Na(+)/P(i) cotransporter (NaPi-IIa) plays a key role in the reabsorption of inorganic phosphate (P(i)) in the renal proximal tubule. The rat NaPi-IIa isoform is a protein of 637 residues for which different algorithms predict 8-12 transmembrane domains (TMDs). Epitope tagging experiments demonstrated that both the N and the C termini of NaPi-IIa are located intracellularly. Site-directed mutagenesis revealed two N-glycosylation sites in a large putative extracellular loop. Results from structure-function studies suggested the assembly of two similar opposed regions that possibly constitute part of the substrate translocation pathway for one phosphate ion together with three sodium ions. Apart from these topological aspects, other structural features of NaPi-IIa are not known. In this study, we have addressed the topology of NaPi-IIa using in vitro transcription/translation of HK-M0 and HK-M1 fusion vectors designed to test membrane insertion properties of cDNA sequences encoding putative NaPi-IIa TMDs. Based on the results of in vitro transcription/translation analyses, we propose a model of NaPi-IIa comprising 12 TMDs, with both N and C termini orientated intracellularly and a large hydrophilic extracellular loop between the fifth and sixth TMDs. The proposed model is in good agreement with the prediction of the NaPi-IIa structure obtained by the hidden Markov algorithm HMMTOP.

Kinetic and structural properties of inorganic pyrophosphatase from the pathogenic bacterium Helicobacter pylori

Inorganic pyrophosphatase (PPase) catalyzes the hydrolysis of pyrophosphate (PPi) to orthophosphate (Pi) and controls the level of PPi in cells. PPase plays an essential role in energy conservation and provides the energy for many biosynthetic pathways. The Helicobacter pylori pyrophosphatase (HpPPase) gene was cloned, expressed, purified, and found to have a molecular weight of 20 kDa. The K(m) and V (max) of HpPPase were determined as 214.4 microM and 594 micromol Pi min(-1) mg(-1), respectively. PPi binds Mg(2+) to form a true substrate that activates the enzyme. However, free PPi could be a potent inhibitor for HpPPase. The effects of the inhibitors NaF, ATP, iminodiphosphate, and N-ethylmaleimide on HpPPase activity were evaluated. NaF showed the highest inhibition of the enzyme. Crystal structures of HpPPase and the PPi-HpPPase complex were determined. HpPPase comprises three alpha-helices and nine beta-strands and folds as a barrel structure. HpPPase forms a hexamer in both the solution and crystal states, and each monomer has its own PPi-binding site. The PPi binding does not cause a significant conformational change in the PPi-HpPPase complex, which might represent an inhibition state for HpPPase in the absence of a divalent metal ion.

The Cadmium Transport Sites of CadA, the Cd2+-ATPase from Listeria monocytogenes

CadA, the Cd(2+)-ATPase from Listeria monocytogenes, belongs to the Zn(2+)/Cd(2+)/Pb(2+)-ATPase bacterial subfamily of P(1B)-ATPases that ensure detoxification of the bacteria. Whereas it is the major determinant of Listeria resistance to Cd(2+), CadA expressed in Saccharomyces cerevisiae severely decreases yeast tolerance to Cd(2+) (Wu, C. C., Bal, N., Pérard, J., Lowe, J., Boscheron, C., Mintz, E., and Catty, P. (2004) Biochem. Biophys. Res. Commun. 324, 1034-1040). This phenotype, which reflects in vivo Cd(2+)-transport activity, was used to select from 33 point mutations, shared out among the eight transmembrane (TM) segments of CadA, those that affect the activity of the protein. Six mutations affecting CadA were found: M149A in TM3; E164A in TM4; C354A, P355A, and C356A in TM6; and D692A in TM8. Functional studies of the six mutants produced in Sf9 cells revealed that Cys(354) and Cys(356) in TM6 as well as Asp(692) in TM8 and Met(149) in TM3 could participate at the Cd(2+)-binding site(s). In the canonical Cys-Pro-Cys motif of P(1B)-ATPases, the two cysteines act at distinct steps in the transport mechanism, Cys(354) being directly involved in Cd(2+) binding, while Cys(356) seems to be required for Cd(2+) occlusion. This confirms an earlier observation that the two equivalent Cys of Ccc2, the yeast Cu(+)-ATPase, also act at different steps. In TM4, Glu(164), which is conserved among P(1B)-ATPases, may be required for Cd(2+) release. Finally, analysis of the role of Cd(2+) in the phosphorylation from ATP and from P(i) of the mutants suggests that two Cd(2+) ions are involved in the reaction cycle of CadA.

The plant P1B-type ATPase AtHMA4 transports Zn and Cd and plays a role in detoxification of transition metals supplied at elevated levels

The transition metal Zn is essential for many physiological processes in plants, yet at elevated concentrations this, and the related non-essential metal Cd, can be toxic. Arabidopsis thaliana HMA4, belonging to the Type P1B subfamily of P-type ATPases, has recently been implicated in Zn nutrition, having a role in root to shoot Zn translocation. Using Arabidopsis insertional mutants, it is shown here that disruption of AtHMA4 function also results in increased sensitivity to elevated levels of Cd and Zn, suggesting that AtHMA4 serves an important role in metal detoxification at higher metal concentrations. AtHMA4 and a truncated form lacking the last 457 amino acids both confer Cd and Zn resistance to yeast but a mutant version of the full-length AtHMA4 (AtHMA4-C357G) does not; this demonstrates that the C-terminal region is not essential for this function. Evidence is presented that AtHMA4 functions as an efflux pump.

Arabidopsis HMA2, a divalent heavy metal-transporting P(IB)-type ATPase, is involved in cytoplasmic Zn2+ homeostasis

PIB-type ATPases transport heavy metal ions (Cu+, Cu2+, Zn2+, Cd2+, Co2+, etc.) across biological membranes. Several members of this subfamily are present in plants. Higher plants are the only eukaryotes where putative Zn(2+)-ATPases have been identified. We have cloned HMA2, a PIB-ATPase present in Arabidopsis (Arabidopsis thaliana), and functionally characterized this enzyme after heterologous expression in yeast (Saccharomyces cerevisiae). HMA2 is a Zn(2+)-dependent ATPase that is also activated by Cd2+ and, to a lesser extent, by other divalent heavy metals (Pb2+, Ni2+, Cu2+, and Co2+). The enzyme forms an acid-stable phosphorylated intermediate and is inhibited by vanadate. HMA2 interacts with Zn2+ and Cd2+ with high affinity (Zn2+ K(1/2) = 0.11 +/- 0.03 microm and Cd2+ K(1/2) = 0.031 +/- 0.007 microm). However, its activity is dependent on millimolar concentrations of Cys in the assay media. Zn2+ transport determinations indicate that the enzyme drives the outward transport of metals from the cell cytoplasm. Analysis of HMA2 mRNA suggests that the enzyme is present in all plant organs and transcript levels do not change in plants exposed to various metals. Removal of HMA2 full-length transcript results in Zn2+ accumulation in plant tissues. hma2 mutant plants also accumulate Cd2+ when exposed to this metal. These results suggest that HMA2 is responsible for Zn2+ efflux from the cells and therefore is required for maintaining low cytoplasmic Zn2+ levels and normal Zn2+ homeostasis.

Identification of the transmembrane metal binding site in Cu+-transporting PIB-type ATPases

P(IB)-type ATPases have an essential role maintaining copper homeostasis. Metal transport by these membrane proteins requires the presence of a transmembrane metal occlusion/binding site. Previous studies showed that Cys residues in the H6 transmembrane segment are required for metal transport. In this study, the participation in metal binding of conserved residues located in transmembrane segments H7 and H8 was tested using CopA, a model Cu(+)-ATPase from Archaeoglobus fulgidus. Four invariant amino acids in the central portion of H7 (Tyr(682) and Asn(683)) and H8 (Met(711) and Ser(715)) were identified as required for Cu(+) binding. Replacement of these residues abolished enzyme activity. These proteins did not undergo Cu(+)-dependent phosphorylation by ATP but were phosphorylated by P(i) in the absence of Cu(+). Moreover, the presence of Cu(+) could not prevent the enzyme phosphorylation by P(i). Other conserved residues in the H7-H8 region were not required for metal binding. Mutation of two invariant Pro residues had little effect on enzyme function. Replacement of residues located close to the cytoplasmic end of H7-H8 led to inactive enzymes. However, these were able to interact with Cu(+) and undergo phosphorylation. This suggests that the integrity of this region is necessary for conformational transitions but not for ligand binding. These data support the presence of a unique transmembrane Cu(+) binding/translocation site constituted by Tyr-Asn in H7, Met and Ser in H8, and two Cys in H6 of Cu(+)-ATPases. The likely Cu(+) coordination during transport appears distinct from that observed in Cu(+) chaperone proteins or catalytic/redox metal binding sites.

Archaeoglobus fulgidus CopB is a thermophilic Cu2+-ATPase: functional role of its histidine-rich-N-terminal metal binding domain

P1B-type ATPases transport heavy metal ions across cellular membranes. Archaeoglobus fulgidus CopB is a member of this subfamily. We have cloned, expressed in Escherichia coli, and functionally characterized this enzyme. CopB and its homologs are distinguished by a metal binding sequence Cys-Pro-His in their sixth transmembrane segment (H6) and a His-rich N-terminal metal binding domain (His-N-MBD). CopB is a thermophilic protein active at 75 degrees C and high ionic strength. It is activated by Cu2+ with high apparent affinity (K1/2 = 0.28 microm) and partially by Cu+ and Ag+ (22 and 55%, respectively). The higher turnover was associated with a faster phosphorylation rate in the presence of Cu2+. A truncated CopB lacking the first 54 amino acids was constructed to characterize the His-N-MBD. This enzyme showed reduced ATPase activity (50% of wild type) but no changes in metal selectivity, ATP dependence, or phosphorylation levels. However, a slower rate of dephosphorylation of the E2P(Cu2+) form was observed for truncated CopB. The data suggest that the presence of the His residue in the putative transmembrane metal binding site of CopB determines a selectivity for this enzyme that is different for that observed in Cu+/Ag+-ATPases carrying a Cys-Pro-Cys sequence. The His-NMBD appears to have a regulatory role affecting the metal transport rate by controlling the metal release/dephosphorylation rates.

Functional expression of AtHMA4, a P1B-type ATPase of the Zn/Co/Cd/Pb subclass

Mechanisms are required by all organisms to maintain the concentration of essential heavy metals (e.g. Zn and Cu) within physiological limits and to minimise the detrimental effects of non-essential heavy metals (e.g. Cd). Heavy-metal P-type ATPases (HMAs) are a subgroup of the P-type ATPase superfamily that may contribute to metal homeostasis in plants. We cloned and characterised a member of this family, AtHMA4, from Arabidopsis thaliana that clusters with the Zn/Co/Cd/Pb subclass of HMAs on phylogenetic analysis. Sequencing of the AtHMA4 cDNA showed that it contained the conserved motifs found in all P-type ATPases and also motifs that are characteristic of heavy-metal ATPases. Escherichia coli mutants defective in the HMAs, CopA and ZntA, were used in functional complementation studies. AtHMA4 was able to restore growth at high [Zn] in the zntA mutant but not at high [Cu] in the copA mutant, suggesting a role in zinc transport. Heterologous expression of AtHMA4 in Saccharomyces cerevisiae made the yeast more resistant to Cd but did not affect sensitivity to other metals compared with vector-transformed controls. The organ specificity of AtHMA4 was analysed in Arabidopsis and showed that AtHMA4 was expressed in a range of tissues with highest expression in roots. AtHMA4 was upregulated in roots exposed to elevated levels of Zn and Mn but downregulated by Cd. Possible physiological roles of this transporter in Arabidopsis are discussed.

Zn(II) metabolism in prokaryotes

It is difficult to over-state the importance of Zn(II) in biology. It is a ubiquitous essential metal ion and plays a role in catalysis, protein structure and perhaps as a signal molecule, in organisms from all three kingdoms. Of necessity, organisms have evolved to optimise the intracellular availability of Zn(II) despite the extracellular milieu. To this end, prokaryotes contain a range of Zn(II) import, Zn(II) export and/or binding proteins, some of which utilise either ATP or the chemiosmotic potential to drive the movement of Zn(II) across the cytosolic membrane, together with proteins that facilitate the diffusion of this ion across either the outer or inner membranes of prokaryotes. This review seeks to give an overview of the systems currently classified as altering Zn(II) availability in prokaryotes.

Escherichia coli mechanisms of copper homeostasis in a changing environment

Escherichia coli is equipped with multiple systems to ensure safe copper handling under varying environmental conditions. The Cu(I)-translocating P-type ATPase CopA, the central component in copper homeostasis, is responsible for removing excess Cu(I) from the cytoplasm. The multi-copper oxidase CueO and the multi-component copper transport system CusCFBA appear to safeguard the periplasmic space from copper-induced toxicity. Some strains of E. coli can survive in copper-rich environments that would normally overwhelm the chromosomally encoded copper homeostatic systems. Such strains possess additional plasmid-encoded genes that confer copper resistance. The pco determinant encodes genes that detoxify copper in the periplasm, although the mechanism is still unknown. Genes involved in copper homeostasis are regulated by MerR-like activators responsive to cytoplasmic Cu(I) or two-component systems sensing periplasmic Cu(I). Pathways of copper uptake and intracellular copper handling are still not identified in E. coli.

Biochemical characterization of CopA, the Escherichia coli Cu(I)-translocating P-type ATPase

Escherichia coli CopA is a copper ion-translocating P-type ATPase that confers copper resistance. CopA formed a phosphorylated intermediate with [gamma-(32)P]ATP. Phosphorylation was inhibited by vanadate and sensitive to KOH and hydroxylamine, consistent with acylphosphate formation on conserved Asp-523. Phosphorylation required a monovalent cation, either Cu(I) or Ag(I). Divalent cations Cu(II), Zn(II), or Co(II) could not substitute, signifying that the substrate of this copper-translocating P-type ATPase is Cu(I) and not Cu(II). CopA purified from dodecylmaltoside-solubilized membranes similarly exhibited Cu(I)/Ag(I)-stimulated ATPase activity, with a K(m) for ATP of 0.5 mm. CopA has two N-terminal Cys(X)(2)Cys sequences, Gly-Leu-Ser-Cys(14)-Gly-His-Cys(17), and Gly-Met-Ser-Cys(110)-Ala-Ser-Cys(113), and a Cys(479)-Pro-Cys(481) motif in membrane-spanning segment six. The requirement of these cysteine residues was investigated by the effect of mutations and deletions. Mutants with substitutions of the N-terminal cysteines or deletion of the first Cys-(X)(2)-Cys motif formed acylphosphate intermediates. From the copper dependence of phosphoenzyme formation, the mutants appear to have 2-3 fold higher affinity for Cu(I) than wild type CopA. In contrast, substitutions in Cys(479) or Cys(481) resulted in loss of copper resistance, transport and phosphoenzyme formation. These results imply that the cysteine residues of the Cys-Pro-Cys motif (but not the N-terminal cysteine residues) are required for CopA function.

A novel histidine-rich CPx-ATPase from the filamentous cyanobacterium Oscillatoria brevis related to multiple-heavy-metal cotolerance

A novel gene related to heavy-metal transport was cloned and identified from the filamentous cyanobacterium Oscillatoria brevis. Sequence analysis of the gene (the Bxa1 gene) showed that its product possessed high homology with heavy-metal transport CPx-ATPases. The CPC motif, which is proposed to form putative cation transduction channel, was found in the sixth transmembrane helix. However, instead of the CXXC motif that is present in the N termini of most metal transport CPx-ATPases, Bxa1 contains a unique Cys-Cys (CC) sequence element and histidine-rich motifs as a putative metal binding site. Northern blotting and real-time quantitative reverse transcription-PCR showed that expression of Bxa1 mRNA was induced in vivo by both monovalent (Cu(+) and Ag(+)) and divalent (Zn(2+) and Cd(2+)) heavy-metal ions at similar levels. Experiments on heavy-metal tolerance in Escherichia coli with recombinant Bxa1 demonstrated that Bxa1 conferred resistance to both monovalent and divalent heavy metals. This is the first report of a CPx-ATPase responsive to both monovalent and divalent heavy metals.

Membrane topology of the p1258 CadA Cd(II)/Pb(II)/Zn(II)-translocating P-type ATPase

Plasmid p1258 carries the cadA gene that confers resistance to cadmium, lead, and zinc. CadA catalyzes ATP-dependent cadmium efflux from cells of Staphylococcus aureus. It is a member of the superfamily of P-type ATPases and belongs to the subfamily of soft metal ion pumps. In this study the membrane topology of this P-type ATPase was determined by constructing fusions with the topological reporter genes phoA or lacZ. A series of 44 C-terminal truncated CadAs were fused with one or the other reporter gene, and the activity of each chimeric protein was determined. In addition, the location of the first transmembrane segment was determined by immunoblot analysis. The results are consistent with the p1258 CadA ATPase having eight transmembrane segments. The first 109 residues is a cytosolic domain that includes the Cys(X)2Cys motif that distinguishes soft metal ion-translocating P-type ATPases from their hard metal ion-translocating homologues. Another feature of soft metal ion P-type ATPases is the CysProCys motif, which is found in the sixth transmembrane segment of CadA. The phosphorylation site and ATP binding domain conserved in all P-type ATPases are situated within the large cytoplasmic loop between the sixth and seventh transmembrane segments.

Solution structure of the N-terminal domain of a potential copper-translocating P-type ATPase from Bacillus subtilis in the apo and Cu(I) loaded states

A putative partner of the already characterized CopZ from Bacillus subtilis was found, both proteins being encoded by genes located in the same operon. This new protein is highly homologous to eukaryotic and prokaryotic P-type ATPases such as CopA, Ccc2 and Menkes proteins. The N-terminal region of this protein contains two soluble domains constituted by amino acid residues 1 to 72 and 73 to 147, respectively, which were expressed both separately and together. In both cases only the 73-147 domain is folded and is stable both in the copper(I)-free and in the copper(I)-bound forms. The folded and unfolded state is monitored through the chemical shift dispersion of 15N-HSQC spectra. In the absence of any structural characterization of CopA-type proteins, we determined the structure of the 73-147 domain in the 1-151 construct in the apo state through 1H, 15N and 13C NMR spectroscopies. The structure of the Cu(I)-loaded 73-147 domain has been also determined in the construct 73-151. About 1300 meaningful NOEs and 90 dihedral angles were used to obtain structures at high resolution both for the Cu(I)-bound and the Cu(I)-free states (backbone RMSD to the mean 0.35(+/-0.06) A and 0.39(+/-0.07) A, respectively). The structural assessment shows that the structures are accurate. The protein has the typical betaalpha(betabeta)alphabeta folding with a cysteine in the C-terminal part of helix alpha1 and the other cysteine in loop 1. The structures are similar to other proteins involved in copper homeostasis. Particularly, between BsCopA and BsCopZ, only the charges located around loop 1 are reversed for BsCopA and BsCopZ, thus suggesting that the two proteins could interact one with the other. The variability in conformation displayed by the N-terminal cysteine of the CXXC motif in a number of structures of copper transporting proteins suggests that this may be the cysteine which binds first to the copper(I) carried by the partner protein.

Characterization of a thermophilic P-type Ag+/Cu+-ATPase from the extremophile Archaeoglobus fulgidus

The thermophilic, sulfur metabolizing Archaeoglobus fulgidus contains two genes, AF0473 and AF0152, encoding for PIB-type heavy metal transport ATPases. In this study, we describe the cloning, heterologous expression, purification, and functional characterization of one of these ATPases, CopA (NCB accession number AAB90763), encoded by AF0473. CopA is active at high temperatures (75 degrees C; E(a) = 103 kJ/mol) and inactive at 37 degrees C. It is activated by Ag+ (ATPase V(max) = 14.82 micromol/mg/h) and to a lesser extent by Cu+ (ATPase V(max) = 3.66 micromol/mg/h). However, Cu+ interacts with the enzyme with higher apparent affinity (ATPase stimulation, Ag+ K(12) = 29.4 microm; Cu+ K(12) = 2.1 microm). This activation by Ag+ or Cu+ is dependent on the presence of millimolar amounts of cysteine. In the presence of ATP, these metals drive the formation of an acid-stable phosphoenzyme with apparent affinities similar to those observed in the ATPase activity determinations (Ag+, K(12) = 23.0 microm; Cu+, K(12) = 3.9 microm). However, comparable levels of phosphoenzyme are reached in the presence of both cations (Ag+, 1.40 nmol/mg; Cu+, 1.08 nmol/mg). The stimulation of phosphorylation by the cations suggests that CopA drives the outward movement of the metal. CopA presents additional functional characteristics similar to other P-type ATPases. ATP interacts with the enzyme with two apparent affinities (ATPase K(m) = 0.25 mm; phosphorylation K(m) = 4.81 microm), and the presence of vanadate leads to enzyme inactivation (IC(50) = 24 microm). This is the first Ag+/Cu+ -ATPase expressed and purified in a functional form. Thus, it provides a model for structure-functional studies of these transporters. Moreover, its characterization will also contribute to an understanding of thermophilic ion transporters.

The functional role of beta subunits in oligomeric P-type ATPases

Na,K-ATPase and gastric and nongastric H,K-ATPases are the only P-type ATPases of higher organisms that are oligomeric and are associated with a beta subunit, which is obligatory for expression and function of enzymes. Topogenesis studies suggest that beta subunits have a fundamental and unique role in K+-transporting P-type ATPases in that they facilitate the correct membrane integration and packing of the catalytic a subunit of these P-type ATPases, which is necessary for their resistance to cellular degradation, their acquisition of functional properties, and their routing to the cell surface. In addition to this chaperone function, beta subunits also participate in the determination of intrinsic transport properties of Na,K- and H,K-ATPases. Increasing experimental evidence suggests that beta assembly is a highly ordered, beta isoform-specific process, which is mediated by multiple interaction sites that contribute in a coordinate, multistep process to the structural and functional maturation of Na,K- and H,K-ATPases.

Characterization of a heavy metal ATPase from the apicomplexan Cryptosporidium parvum

P1-ATPases are transporters which pump heavy metals across membranes, either to provide enzymes with essential cofactors or to remove excess, toxic metal cations from the cytosol. The first protist P1-ATPase (CpATPase2) has been isolated from the apicomplexan Cryptosporidium parvum, an opportunistic pathogen of AIDS patients. This single copy gene encodes 1260 amino acids (aa), predicting a protein of 144.7 kDa. Reverse transcription-polymerase chain reaction (RT-PCR) and western blot analysis confirmed CpATPase2 expression. Immunofluorescence microscopy of C. parvum sporozoites using rabbit antiserum raised against a glutathione-S-transferase (GST) fusion protein suggests that CpATPase2 is associated with the plasma- and cytoplasmic membranes. The protein shares greatest overall sequence similarity to previously characterized copper P1-ATPases. Expression and subsequent biochemical analyses of the N-terminal heavy metal binding domain (HMBD, GMxCxxC) of CpATPase2 as a maltose-binding protein (MBP) in Escherichia coli reveals that the protein specifically binds reduced copper, Cu(I), in vitro and in vivo, and that the cysteine residues of HMBD are responsible for heavy metal coordination. Overall, these data show that the apicomplexan C. parvum possesses a heavy metal P-ATPase transporter with a specificity for reduced copper. Since this discovery represents the first time a heavy metal P-ATPase has been identified and characterized from a protist, further molecular and biochemical studies are needed to understand the roles heavy metal P-ATPases play in heavy metal metabolism and potential virulence for this and other apicomplexa.

Designing new metal affinity peptides by random mutagenesis of a natural metal-binding site

The metal-binding site of a Helicobacter pylori ATPase 439 (heli(WT)-tag) was successfully used as a new fusion peptide for immobilized metal ion affinity chromatography (IMAC). It produced higher yields than the frequently used his6-tag. Due to stronger binding of the peptide to metal ions, harsher elution conditions were, however, necessary. This undesired side-effect was overcome by modifying the heli(WT)-tag by polymerase chain reaction-directed mutagenesis. The modified tags were screened by an automated high-throughput IMAC system, leading to a heliM14-tag peptide that could be eluted under conditions similar to those of the his6-tag but at the same time produced 20% higher yields of the desired protein.

Na(+)/H(+) exchanger NHE3 has 11 membrane spanning domains and a cleaved signal peptide: topology analysis using in vitro transcription/translation

The transmembrane topology of Na(+)/H(+) exchanger NHE3 has been studied using in vitro transcription/translation of two types of fusion vectors designed to test membrane insertion properties of cDNA sequences encoding putative NHE3 membrane spanning domains (msds). These vectors encode N-terminal 101 (HKM0) or 139 (HKM1) amino acids of the H,K-ATPase alpha-subunit, a linker region and a reporter sequence containing five N-linked glycosylation consensus sites in the C-terminal 177 amino acids of the H,K-ATPase beta-subunit. The glycosylation status of the reporter sequence was used as a marker for the analysis of signal anchor and stop transfer properties of each putative msd in both the HKM0 and the HKM1 vectors. The linker region of the vectors was replaced by sequences that contain putative msds of NHE3 individually or in pairs. In vitro transcription/translation was performed using [(35)S]methionine in a reticulocyte lysate system +/- microsomes, and the translation products were identified by autoradiography following separation using SDS-PAGE. We propose a revised NHE3 topology model, which contains a cleaved signal peptide followed by 11 msds, including extracellular orientation of the N-terminus and intracellular orientation of the C-terminus. The presence of a cleavable signal peptide in NHE3 was demonstrated by its cleavage from NHE3 during translational processing of full-length and truncated NHE3 in the presence of microsomes. Of 11 putative msds, six (msds 1, 2, 4, 7, 10, and 11) acted as both signal anchor and stop transfer sequences, while five (msds 3, 5, 6, 8, and 9) had signal anchor activities when tested alone. Of the latter, 3, 5, 6, and 9 were shown to act as stop transfer sequences after C-terminal extension. The actual membrane orientation of each sequential transmembrane segment of NHE3 was deduced from the membrane location of the N- and C-termini of NHE3. The regions between putative msds 8 and 9 and between msds 10 and 11, which correspond to the fourth and fifth extracellular loops, did not act as msds when tested alone. However, the extension of the fifth extracellular loop with adjacent putative msds showed some membrane-associated properties suggesting that the fifth extracellular loop might be acting as a "P-loop"-like structure.

A functional-phylogenetic classification system for transmembrane solute transporters

A comprehensive classification system for transmembrane molecular transporters has been developed and recently approved by the transport panel of the nomenclature committee of the International Union of Biochemistry and Molecular Biology. This system is based on (i) transporter class and subclass (mode of transport and energy coupling mechanism), (ii) protein phylogenetic family and subfamily, and (iii) substrate specificity. Almost all of the more than 250 identified families of transporters include members that function exclusively in transport. Channels (115 families), secondary active transporters (uniporters, symporters, and antiporters) (78 families), primary active transporters (23 families), group translocators (6 families), and transport proteins of ill-defined function or of unknown mechanism (51 families) constitute distinct categories. Transport mode and energy coupling prove to be relatively immutable characteristics and therefore provide primary bases for classification. Phylogenetic grouping reflects structure, function, mechanism, and often substrate specificity and therefore provides a reliable secondary basis for classification. Substrate specificity and polarity of transport prove to be more readily altered during evolutionary history and therefore provide a tertiary basis for classification. With very few exceptions, a phylogenetic family of transporters includes members that function by a single transport mode and energy coupling mechanism, although a variety of substrates may be transported, sometimes with either inwardly or outwardly directed polarity. In this review, I provide cross-referencing of well-characterized constituent transporters according to (i) transport mode, (ii) energy coupling mechanism, (iii) phylogenetic grouping, and (iv) substrates transported. The structural features and distribution of recognized family members throughout the living world are also evaluated. The tabulations should facilitate familial and functional assignments of newly sequenced transport proteins that will result from future genome sequencing projects.

Membrane topology of the NixA nickel transporter of Helicobacter pylori: two nickel transport-specific motifs within transmembrane helices II and III

NixA, the high-affinity cytoplasmic membrane nickel transport protein of Helicobacter pylori, imports Ni(2+) into the cell for insertion into the active site of the urease metalloenzyme, which is required for gastric colonization. NixA fractionates with the cytoplasmic membrane, and protein cross-linking studies suggest that NixA functions as a monomer. A preliminary topological model of NixA with seven transmembrane domains was previously proposed based on hydropathy, charge dispersion, and homology to other transporters. To test the proposed topology of NixA and relate critical residues to specific structural elements, a series of 21 NixA-LacZ and 21 NixA-PhoA fusions were created along the entire length of the protein. Expression of reporter fusions was confirmed by Western blotting with beta-galactosidase- and alkaline phosphatase-specific antisera. The activities of reporter fusions near to and upstream of the predicted translational initiation demonstrated the presence of an additional amino-terminal transmembrane domain including a membrane localization signal. Activities of fusions immediately adjacent to motifs which have been shown to be requisite for Ni(2+) transport localized these motifs entirely within transmembrane domains II and III. Fusion activities localized six additional Asp and Glu residues which reduced Ni(2+) transport by >90% when mutated within or immediately adjacent to transmembrane domains II, V, VI, and VII. All fusions strongly support a model of NixA in which the amino and carboxy termini are located in the cytoplasm and the protein possesses eight transmembrane domains.

Membrane topology and insertion of membrane proteins: search for topogenic signals

Integral membrane proteins are found in all cellular membranes and carry out many of the functions that are essential to life. The membrane-embedded domains of integral membrane proteins are structurally quite simple, allowing the use of various prediction methods and biochemical methods to obtain structural information about membrane proteins. A critical step in the biosynthetic pathway leading to the folded protein in the membrane is its insertion into the lipid bilayer. Understanding of the fundamentals of the insertion and folding processes will significantly improve the methods used to predict the three-dimensional membrane protein structure from the amino acid sequence. In the first part of this review, biochemical approaches to elucidate membrane protein topology are reviewed and evaluated, and in the second part, the use of similar techniques to study membrane protein insertion is discussed. The latter studies search for signals in the polypeptide chain that direct the insertion process. Knowledge of the topogenic signals in the nascent chain of a membrane protein is essential for the evaluation of membrane topology studies.

Contributions of genome sequencing to understanding the biology of Helicobacter pylori

About half of the world's population carries Helicobacter pylori, a gram-negative, spiral bacterium that colonizes the human stomach. The link between H. pylori and, ulceration as well as its association with the development of both gastric cancer and mucosa-associated lymphoid tissue lymphoma in humans is a serious public health concern. The publication of the genome sequences of two stains of H. pylori gives rise to direct evidence on the genetic diversity reported previously with respect to gene organization and nucleotide variability from strain to strain. The genome size of H. pylori strain 26695 is 1,6697,867 bp and is 1,643,831 bp for strain J99. Approximately 89% of the predicted open reading frames are common to both of the strains, confirming H. pylori as a single species. A region containing approximately 45% of H. pylori strain-specific open reading frames, termed the plasticity zone, is present on the chromosomes, verifying that some strain variability exists. Frequent alteration of nucleotides in the third position of the triplet codons and various copies of insertion elements on the individual chromosomes appear to contribute to distinct polymorphic fingerprints among strains analyzed by restriction fragment length polymorphisms, random amplified polymorphic DNA method, and repetitive element-polymerase chain reaction. Disordered chromosomal locations of some genes seen by pulsed-field gel electrophoresis are likely caused by rearrangement or inversion of certain segments in the genomes. Cloning and functional characterization of the genes involved in acidic survival, vacuolating toxin, cag-pathogenicity island, motility, attachment to epithelial cells, natural transformation, and the biosynthesis of lipopolysaccharides have considerably increased our understanding of the molecular genetic basis for the pathogenesis of H. pylori. The homopolymeric nucleotide tracts and dinucleotide repeats, which potentially regulate the on- and off-status of the target genes by the strand-slipped mispairing mechanism, are often found in the genes encoding the outer-membrane proteins, in enzymes for lipopolysaccharide synthesis, and within DNA modification/restriction systems. Therefore, these genes may be involved in the H. pylori-host interaction.

Membrane topology of CadA homologous P-type ATPase of Helicobacter pylori as determined by expression of phoA fusions in Escherichia coli and the positive inside rule

The only experimental data available on the membrane topology of transition metal ATPases are from in vitro studies on two distinct P-type ATPases (CadA and CopA) of a gastric bacterium, Helicobacter pylori, both postulated to contain eight transmembrane domains (H1 to H8). In this study, H. pylori CadA ATPase was subjected to analysis of membrane topology in vivo by expression of ATPase-alkaline phosphatase (AP) hybrid proteins in Escherichia coli using a novel vector, pBADphoA. This vector contains an inducible arabinose promoter and unique restriction sites for fusion of DNA fragments to phoA. The phoA gene lacking sequences encoding its N-terminal signal peptide was linked to the C-terminal regions of the postulated five cytoplasmic and four periplasmic segments of the H. pylori pump. The results obtained by heterologous expression of ATPase-AP hybrid proteins showed consistence with a model of eight transmembrane domains. They also demonstrated that the H. pylori ATPase sequences are well assembled in the cytoplasmic membrane of E. coli, a neutralophilic bacterium. Cloning and amino acid sequence analysis of the homologous ATPase of Helicobacter felis further verified the topological model for the H. pylori pump analyzed here, although the degree of amino acid sequence identity varied between the corresponding transmembrane segments, from 25% for H1 up to 100% for H6. It was found that the topology of ATPase follows the 'positive inside rule'. With respect to the bioenergetic capacities of H. pylori, we discuss here the membrane potential as a possible factor directing insertion of ATPases in the cytoplasmic membrane of gastric bacteria.

Metabolism and genetics of Helicobacter pylori: the genome era

The publication of the complete sequence of Helicobacter pylori 26695 in 1997 and more recently that of strain J99 has provided new insight into the biology of this organism. In this review, we attempt to analyze and interpret the information provided by sequence annotations and to compare these data with those provided by experimental analyses. After a brief description of the general features of the genomes of the two sequenced strains, the principal metabolic pathways are analyzed. In particular, the enzymes encoded by H. pylori involved in fermentative and oxidative metabolism, lipopolysaccharide biosynthesis, nucleotide biosynthesis, aerobic and anaerobic respiration, and iron and nitrogen assimilation are described, and the areas of controversy between the experimental data and those provided by the sequence annotation are discussed. The role of urease, particularly in pH homeostasis, and other specialized mechanisms developed by the bacterium to maintain its internal pH are also considered. The replicational, transcriptional, and translational apparatuses are reviewed, as is the regulatory network. The numerous findings on the metabolism of the bacteria and the paucity of gene expression regulation systems are indicative of the high level of adaptation to the human gastric environment. Arguments in favor of the diversity of H. pylori and molecular data reflecting possible mechanisms involved in this diversity are presented. Finally, we compare the numerous experimental data on the colonization factors and those provided from the genome sequence annotation, in particular for genes involved in motility and adherence of the bacterium to the gastric tissue.

Transposon Tn21, flagship of the floating genome

The transposon Tn21 and a group of closely related transposons (the Tn21 family) are involved in the global dissemination of antibiotic resistance determinants in gram-negative facultative bacteria. The molecular basis for their involvement is carriage by the Tn21 family of a mobile DNA element (the integron) encoding a site-specific system for the acquisition of multiple antibiotic resistance genes. The paradigm example, Tn21, also carries genes for its own transposition and a mercury resistance (mer) operon. We have compiled the entire 19,671-bp sequence of Tn21 and assessed the possible origins and functions of the genes it contains. Our assessment adds molecular detail to previous models of the evolution of Tn21 and is consistent with the insertion of the integron In2 into an ancestral Tn501-like mer transposon. Codon usage analysis indicates distinct host origins for the ancestral mer operon, the integron, and the gene cassette and two insertion sequences which lie within the integron. The sole gene of unknown function in the integron, orf5, resembles a puromycin-modifying enzyme from an antibiotic producing bacterium. A possible seventh gene in the mer operon (merE), perhaps with a role in Hg(II) transport, lies in the junction between the integron and the mer operon. Analysis of the region interrupted by insertion of the integron suggests that the putative transposition regulator, tnpM, is the C-terminal vestige of a tyrosine kinase sensor present in the ancestral mer transposon. The extensive dissemination of the Tn21 family may have resulted from the fortuitous association of a genetic element for accumulating multiple antibiotic resistances (the integron) with one conferring resistance to a toxic metal at a time when clinical, agricultural, and industrial practices were rapidly increasing the exposure to both types of selective agents. The compendium offered here will provide a reference point for ongoing observations of related elements in multiply resistant strains emerging worldwide.

Role of Hpn and NixA of Helicobacter pylori in susceptibility and resistance to bismuth and other metal ions

BACKGROUND

Helicobacter pylori produces Hpn, a 60-amino acid, histidine-rich protein that avidly binds nickel and zinc ions, and NixA, a high-affinity nickel transporter in the cytoplasmic membrane. We tested the hypothesis that Hpn and NixA govern susceptibility to metal ions in H. pylori.

MATERIALS AND METHODS

Hpn-negative mutants of four H. pylori strains were constructed by standard allelic exchange techniques to yield isogenic Hpn+/Hpn-deficient pairs. A metal concentration that inhibited growth by 50% (IC50) was calculated for Ni2+, Zn2+, Cu2+, and Co2+ by comparing OD600 of cultures in metal-supplemented and control media.

RESULTS

Among all four pairs of isogenic strains, the tolerance for Ni2+ was reduced significantly (p <.001) in the Hpn mutants; the mean IC50 value for wild-type strains was 1.9 mM; for the mutant, it was 0.8 mM. In contrast, growth inhibition by Zn2+ was identical within the fours pairs, as was Cu2+ and Co2+ tolerance in one pair tested. We also found that deletion of the hpn gene increases susceptibility to therapeutic forms of bismuth by testing a mutant and wild-type pair with ranitidine bismuth citrate, bismuth citrate, and four antibiotics. Minimal inhibitory concentrations of ranitidine bismuth citrate dropped from 9.2 to 2.3 microg/ml, and those of bismuth citrate dropped from 7.4 to 3.2 microg/ml (p <.05 for both comparisons), while susceptibility to the antibiotics was unaffected. Disruption of the nixA gene encoding the specific Ni2+ transport protein of H. pylori did not change susceptibility to bismuth.

CONCLUSION

We concluded that bacteria lacking Hpn, cultured in vitro, are more susceptible than is the wild type to bismuth and Ni2+.

Membrane insertion scanning of the human ileal sodium/bile acid co-transporter

Mammalian sodium-dependent bile acid transporters (SBATs) responsible for bile salt uptake across the liver sinusoidal or ileal/renal brush border membrane have been identified and share approximately 35% amino acid sequence identity. Programs for prediction of topology and localization of transmembrane helices identify eight or nine hydrophobic regions for the SBAT sequences as membrane spanning. Analysis of N-linked glycosylation has provided evidence for an exoplasmic N-terminus and a cytoplasmic C-terminus, indicative of an odd number of transmembrane segments. To determine the membrane topography of the human ileal SBAT (HISBAT), an in vitro translation/translocation protocol was employed using three different fusion protein constructs. Individual HISBAT segments were analyzed for signal anchor or stop translocation (stop transfer) activity by insertion between a cytoplasmic anchor (HK M0) or a signal anchor segment (HK M1) and a glycosylation flag (HK beta). To examine consecutive HISBAT sequences, sequential hydrophobic sequences were inserted into the HK M0 vector or fusion vectors were made that included the glycosylated N-terminus of HISBAT, sequential hydrophobic sequences, and the glycosylation flag. Individual signal anchor (SA) and stop transfer (ST) properties were found for seven out of the nine predicted hydrophobic segments (H1, H2, H4, H5, H6, H7, and H9), supporting a seven transmembrane segment model. However, the H3 region was membrane inserted when translated in the context of the native HISBAT flanking sequences. Furthermore, results from translations of sequential constructs ending after H7 provided support for integration of H8. These data provide support for a SBAT transmembrane domain model with nine integrated segments with an exoplasmic N-terminus and a cytoplasmic C-terminus consistent with a recent predictive analysis of this transporter topology.

Helicobacter pylori cadA encodes an essential Cd(II)-Zn(II)-Co(II) resistance factor influencing urease activity

Inactivation of Helicobacter pylori cadA, encoding a putative transition metal ATPase, was only possible in one of four natural competent H. pylori strains, designated 69A. All tested cadA mutants showed increased growth sensitivity to Cd(II) and Zn(II). In addition, some of them showed both reduced 63Ni accumulation during growth and no or impaired urease activity, which was not due to lack of urease enzyme subunits. Gene complementation experiments with plasmid (pY178)-derived H. pylori cadA failed to correct the deficiencies, whereas resistance to Cd(II) and Zn(II) was restored. Moreover, pY178 conferred increased Co(II) resistance to both the cadA mutants and the wild-type strain 69A. Heterologous expression of H. pylori cadA in an Escherichia coli zntA mutant resulted in an elevated resistance to Cd(II) and Zn(II). Expression of cadA in E. coli SE5000 harbouring H. pylori nixA, which encodes a divalent cation importer along with the H. pylori urease gene cluster, led to about a threefold increase in urease activity compared with E. coli control cells lacking the H. pylori cadA gene. These results suggest that H. pylori CadA is an essential resistance pump with ion specificity towards Cd(II), Zn(II) and Co(II). They also point to a possible role of H. pylori CadA in high-level activity of H. pylori urease, an enzyme sensitive to a variety of metal ions.

Isolation of Helicobacter pylori genes that modulate urease activity

Helicobacter pylori urease, a nickel-requiring metalloenzyme, hydrolyzes urea to NH3 and CO2. We sought to identify H. pylori genes that modulate urease activity by constructing pHP8080, a plasmid which encodes both H. pylori urease and the NixA nickel transporter. Escherichia coli SE5000 and DH5alpha transformed with pHP8080 resulted in a high-level urease producer and a low-level urease producer, respectively. An H. pylori DNA library was cotransformed into SE5000 (pHP8080) and DH5alpha (pHP8080) and was screened for cotransformants expressing either lowered or heightened urease activity, respectively. Among the clones carrying urease-enhancing factors, 21 of 23 contained hp0548, a gene that potentially encodes a DNA helicase found within the cag pathogenicity island, and hp0511, a gene that potentially encodes a lipoprotein. Each of these genes, when subcloned, conferred a urease-enhancing activity in E. coli (pHP8080) compared with the vector control. Among clones carrying urease-decreasing factors, 11 of 13 clones contained the flbA (also known as flhA) flagellar biosynthesis/regulatory gene (hp1041), an lcrD homolog. The LcrD protein family is involved in type III secretion and flagellar secretion in pathogenic bacteria. Almost no urease activity was detected in E. coli (pHP8080) containing the subcloned flbA gene. Furthermore, there was significantly reduced synthesis of the urease structural subunits in E. coli (pHP8080) containing the flbA gene, as determined by Western blot analysis with UreA and UreB antiserum. Thus, flagellar biosynthesis and urease activity may be linked in H. pylori. These results suggest that H. pylori genes may modulate urease activity.

Insertion of a bacterial secondary transport protein in the endoplasmic reticulum membrane

The sodium ion-dependent citrate carrier of Klebsiella pneumoniae (CitS) contains 12 hydrophobic potential transmembrane domains. Surprisingly, an alkaline phosphatase fusion study in Escherichia coli has suggested that only 9 of these domains are embedded in the membrane, and 3 are translocated to the periplasm (van Geest, M., and Lolkema, J. S. (1996) J. Biol. Chem. 271, 25582-25589). To provide independent data on the topology and mode of membrane insertion of CitS, we have investigated its insertion into the endoplasmic reticulum (ER) membrane. By using in vitro translation of model proteins in the presence of dog pancreas microsomes, each of the putative transmembrane segments of CitS was assayed for its potency to insert into the ER membrane, both as an isolated segment as well as in the context of COOH-terminal truncation mutants. All 12 segments were able to insert into the membrane as Ncyt-Clum signal anchor sequences. In a series of COOH-terminal truncation mutants, the segments inserted in a sequential way except for one segment, segment Vb, which was translocated to the lumen. Hydrophobic segments VIII and IX, which, according to the alkaline phosphatase fusion study, are in the periplasm of E. coli, form a helical hairpin in the ER membrane. These observations suggest a topology for CitS with 11 transmembrane segments and also demonstrate that the sequence requirements for signal anchor and stop transfer function are different.

Expression of functional Na+/H+ antiporters of Helicobacter pylori in antiporter-deficient Escherichia coli mutants

An open reading frame with a sequence homologous to Escherichia coli Na+/H+ antiporter A (ENhaA) was found in the total genomic sequence of Helicobacter pylori, a pathogenic bacterium of gastric inflammation, and was named HNhaA. The primary sequences and the hydropathy profiles of ENhaA and HNhaA were very homologous except for one additional region found in HNhaA. This sequence has about 40 hydrophilic amino acid residues inserted at the position next to residue 235 of ENhaA which corresponds to residue 245 of HNhaA. HNhaA was expressed in E. coli mutants deficient in Na+/H+ antiporters and complemented the salt-sensitive phenotype of the mutants. Membrane vesicles prepared from these transformants of HNhaA using mutants deficient in the antiporters had the antiporter activities. Surprisingly, the antiporter activity in the transformant membranes was high at acidic and neutral pH, while ENhaA did not function at these pHs. A hydrophilic region around residue 235 in ENhaA and the additional hydrophilic region of about 40 residues in the same region found in HNhaA might be responsible for this difference in activity by acting as putative pH sensors.

The physiology and metabolism of the human gastric pathogen Helicobacter pylori

Helicobacter pylori is a spiral Gram-negative microaerophilic bacterium that causes one of the most common infections in humans; approximately 30-50% of individuals in Western Europe are infected and the figure is nearly 100% in the developing world. It is recognized as the major aetiological factor in chronic active type B gastritis, and gastric and duodenal ulceration and as a risk factor for gastric cancer. H. pylori normally inhabits the mucus-lined surface of the antrum of the human stomach where it induces a mild inflammation, but its presence is otherwise usually asymptomatic. A variety of virulence factors appear to play a role in pathogenesis. These include the vacuolating cytotoxin VacA, cytotoxin-associated proteins, urease and motility. All are under intense study in an attempt to understand how the bacterium colonizes and persists in the gastric mucosa, and how H. pylori infections lead to the disease state. Although an explosion of research on H. pylori has occurred within the past 15 years, most efforts have been directed at aspects of the bacterium and disease process which are of direct clinical relevance. Consequently, our knowledge of many aspects of the physiology and metabolism of H. pylori is relatively poor. This should change rapidly now that the complete genome sequence of a pathogenic strain has been determined. This review focuses attention on these more fundamental areas of Helicobacter biology. Analysis of the genome sequence and some detailed metabolic studies have revealed solute transport systems, an incomplete citric acid cycle and several incomplete biosynthetic pathways, which largely explain the complex nutritional requirements of H. pylori. The microaerophilic nature of the bacterium is of particular interest and may be due in part to the involvement of oxygen-sensitive enzymes in central metabolic pathways. However, the biochemical basis for the requirement for CO2 has not been completely explained and a major surprise is the apparent lack of anaplerotic carboxylation enzymes. Although genes for glycolytic enzymes are present, physiological studies indicate that the Entner-Doudoroff and pentose phosphate pathways are more active. The respiratory chain is remarkably simple, apparently with a single terminal oxidase and fumarate reductase as the only reductase for anaerobic respiration. NADPH appears to be the preferred electron donor in vivo, rather than NADH as in most other bacteria. H. pylori is not an acidophile, and must possess mechanisms to survive stomach acid. Many studies have been carried out on the role of the urease in acid tolerance but mechanisms to maintain the protonmotive force at low external pH values may also be important, although poorly understood at present. In terms of the regulation of gene expression, there are few regulatory and DNA binding proteins in H. pylori, especially the two-component 'sensor-regulator' systems, which indicates a minimal degree of environmentally responsive gene expression.