Structure of the heme d of Penicillium vitale and Escherichia coli catalases

Heme d formation in a Shewanella benthica hemoglobin

In our continued investigations of microbial globins, we solved the structure of a truncated hemoglobin from Shewanella benthica, an obligate psychropiezophilic bacterium. The distal side of the heme active site is lined mostly with hydrophobic residues, with the exception of a tyrosine, Tyr34 (CD1) and a histidine, His24 (B13). We found that purified SbHbN, when crystallized in the ferric form with polyethylene glycol as precipitant, turned into a green color over weeks. The electron density obtained from the green crystals accommodated a trans heme d, a chlorin-type derivative featuring a γ-spirolactone and a vicinal hydroxyl group on a pyrroline ring. In solution, exposure of the protein to one equivalent of hydrogen peroxide resulted in a similar green color change, but caused by the formation of multiple products. These were oxidation species released on protein denaturation, likely including heme d, and a species with heme covalently attached to the polypeptide. The Tyr34Phe replacement prevented the formation of both heme d and the covalent linkage. The ready modification of heme b by SbHbN expands the range of chemistries supported by the globin fold and offers a route to a novel heme cofactor.

CD98hc is a target for brain delivery of biotherapeutics

Brain exposure of systemically administered biotherapeutics is highly restricted by the blood-brain barrier (BBB). Here, we report the engineering and characterization of a BBB transport vehicle targeting the CD98 heavy chain (CD98hc or SLC3A2) of heterodimeric amino acid transporters (TVCD98hc). The pharmacokinetic and biodistribution properties of a CD98hc antibody transport vehicle (ATVCD98hc) are assessed in humanized CD98hc knock-in mice and cynomolgus monkeys. Compared to most existing BBB platforms targeting the transferrin receptor, peripherally administered ATVCD98hc demonstrates differentiated brain delivery with markedly slower and more prolonged kinetic properties. Specific biodistribution profiles within the brain parenchyma can be modulated by introducing Fc mutations on ATVCD98hc that impact FcγR engagement, changing the valency of CD98hc binding, and by altering the extent of target engagement with Fabs. Our study establishes TVCD98hc as a modular brain delivery platform with favorable kinetic, biodistribution, and safety properties distinct from previously reported BBB platforms.

Monofunctional Heme-Catalases

The review focuses on four issues that are critical for the understanding of monofunctional catalases. How hydrogen peroxide (H2O2) reaches the active site and outcompetes water molecules to be able to function at a very high rate is one of the issues examined. Part of the answer is a gate valve system that is instrumental to drive out solvent molecules from the final section of the main channel. A second issue relates to how the enzyme deals with an unproductive reactive compound I (Cpd I) intermediate. Peroxidatic two and one electron donors and the transfer of electrons to the active site from NADPH and other compounds are reviewed. The new ascribed catalase reactions are revised, indicating possible measurement pitfalls. A third issue concerns the heme b to heme d oxidation, why this reaction occurs only in some large-size subunit catalases (LSCs), and the possible role of singlet oxygen in this and other modifications. The formation of a covalent bond between the proximal tyrosine with the vicinal residue is analyzed. The last issue refers to the origin and function of the additional C-terminal domain (TD) of LSCs. The TD has a molecular chaperone activity that is traced to a gene fusion between a Hsp31-type chaperone and a small-size subunit catalase (SSC).

Recent developments in the synthesis of bio-inspired iron porphyrins for small molecule activation

Nature utilizes a diverse set of tetrapyrrole-based macrocycles (referred to as porphyrinoids) for catalyzing various biological processes. Investigation of the differences in electronic structure and reactivity in these reactions have revealed striking differences that lead to diverse reactivity from, apparently, similar looking active sites. Therefore, the role of the different heme cofactors as well as the distal superstructure in the proteins is important to understand. This article summarizes the role of a few synthetic metallo-porphyrinoids towards catalyzing several small molecule activation reactions, such as the ORR, NiRR, CO₂RR, etc. The major focus of the article is to enlighten the synthetic routes to the well-decorated active-site mimic in a tailor-made fashion pursuing a retrosynthetic approach, learning from the biosynthesis of the cofactors. Techniques and the role of the second-sphere residues on the reaction rate, selectivity, etc. are incorporated emulating the basic amino acid residues fencing the active sites. These bioinspired mimics play an important role towards understanding the role of the prosthetic groups as well as the basic residues towards any reaction occurring in Nature.

Spectroscopic evidence of the effect of hydrogen peroxide excess on the coproheme decarboxylase from actinobacterial Corynebacterium diphtheriae

The actinobacterial coproheme decarboxylase from Corynebacterium diphtheriae catalyzes the final reaction to generate heme b via the "coproporphyrin-dependent" heme biosynthesis pathway in the presence of hydrogen peroxide. The enzyme has a high reactivity toward H2O2 used for the catalytic reaction and in the presence of an excess of H2O2 new species are generated. Resonance Raman data, together with electronic absorption spectroscopy and mass spectrometry, indicate that an excess of hydrogen peroxide for both the substrate (coproheme) and product (heme b) complexes of this enzyme causes a porphyrin hydroxylation of ring C or D, which is compatible with the formation of an iron chlorin-type heme d species. A similar effect has been previously observed for other heme-containing proteins, but this is the first time that a similar mechanism is reported for a coproheme enzyme. The hydroxylation determines a symmetry lowering of the porphyrin macrocycle, which causes the activation of A2g modes upon Soret excitation with a significant change in their polarization ratios, the enhancement and splitting into two components of many Eu bands, and an intensity decrease of the non-totally symmetric modes B1g, which become polarized. This latter effect is clearly observed for the isolated ν10 mode upon either Soret or Q-band excitations. The distal His118 is shown to be an absolute requirement for the conversion to heme d. This residue also plays an important role in the oxidative decarboxylation, because it acts as a base for deprotonation and subsequent heterolytic cleavage of hydrogen peroxide.

Azulichlorins and Benzocarbachlorins Derived Therefrom

Acid-catalyzed condensation of azulidipyrrane aldehydes with a dihydrodipyrrin carbaldehyde afforded the first examples of azulichlorins. These macrocyclic products were isolated in a monoprotonated form, and the free bases proved to be somewhat unstable. The monocations were strongly diatropic, and proton NMR spectroscopy showed the internal C-H at ca. -2 ppm. Addition of TFA gave the related dications, but these exhibited significantly reduced aromatic ring currents. Reaction of an azulichlorin with tert-butyl hydroperoxide and KOH in dichloromethane/methanol gave a benzocarbachlorin and two related aldehydes. The UV-vis spectrum for the benzocarbachlorin showed a split Soret band at 414 and 430 nm, together with a strong chlorin-like absorption at 684 nm. The proton NMR spectrum indicated that the carbachlorin is strongly aromatic and the internal C-H was observed at -4.64 ppm. Addition of TFA afforded a C-protonated dication with a significantly increased diatropic ring current. The proton NMR spectrum, NICS calculations, and AICD plots indicated that the system favors a 22π electron delocalization pathway that runs through the fused benzo unit. Addition of TFA to the benzocarbachlorin aldehydes primarily led to the formation of monocations, and the generation of C-protonated dications was no longer favored due to the presence of electron-withdrawing formyl moieties.

Identification of the site of oxidase substrate binding in Scytalidium thermophilum catalase

The catalase from Scytalidium thermophilum is a homotetramer containing a heme d in each active site. Although the enzyme has a classical monofunctional catalase fold, it also possesses oxidase activity towards a number of small organics, including catechol and phenol. In order to further investigate this, the crystal structure of the complex of the catalase with the classical catalase inhibitor 3-amino-1,2,4-triazole (3TR) was determined at 1.95 Å resolution. Surprisingly, no binding to the heme site was observed; instead, 3TR occupies a binding site corresponding to the NADPH-binding pocket in mammalian catalases at the entrance to a lateral channel leading to the heme. Kinetic analysis of site-directed mutants supports the assignment of this pocket as the binding site for oxidase substrates.

Synthesis and Properties of Carbaporphyrin and Carbachlorin Dimethyl Esters Derived from Cyclopentanedialdehydes

Norbornenes with two ester substituents were prepared by Diels-Alder cycloadditions of cyclopentadiene with dimethyl fumarate and dimethyl 1,1-ethylenedicarboxylate. Oxidation with potassium permanganate gave good yields of related diols that were oxidatively ring-opened to afford cyclopentane dialdehydes. MacDonald-type "3 + 1" condensations with a tripyrrane, followed by oxidation with DDQ in refluxing toluene, gave carbaporphyrin or carbachlorin products in good yields. The macrocyclic products were highly diatropic and produced porphyrin-like UV-vis spectra. The carbaporphyrin was converted into silver(III) and gold(III) organometallic derivatives. Reaction with methyl iodide in the presence of potassium carbonate gave mono- and dialkylation products, and treatment of the former with Ni(OAc)₂ or Pd(OAc)₂ afforded nickel(II) and palladium(II) complexes. The free base carbaporphyrin and carbachlorin, and the nickel and palladium complexes, were characterized by X-ray crystallography. The carbachlorin also reacted with silver(I) acetate to give a silver(III) derivative. Carbaporphyrins and carbachlorins underwent deuterium exchange at the meso-positions with deuteriated TFA, and this observation indicates that protonation is occurring at the bridging carbons. The new route to carbaporphyrins and carbachlorins has enabled detailed studies on the properties of these systems and provides the foundations for future investigations.

Synthesis, delivery and regulation of eukaryotic heme and Fe-S cluster cofactors

In humans, the bulk of iron in the body (over 75%) is directed towards heme- or Fe-S cluster cofactor synthesis, and the complex, highly regulated pathways in place to accomplish biosynthesis have evolved to safely assemble and load these cofactors into apoprotein partners. In eukaryotes, heme biosynthesis is both initiated and finalized within the mitochondria, while cellular Fe-S cluster assembly is controlled by correlated pathways both within the mitochondria and within the cytosol. Iron plays a vital role in a wide array of metabolic processes and defects in iron cofactor assembly leads to human diseases. This review describes progress towards our molecular-level understanding of cellular heme and Fe-S cluster biosynthesis, focusing on the regulation and mechanistic details that are essential for understanding human disorders related to the breakdown in these essential pathways.

An unexpected reactivity of the P460cofactor in hydroxylamine oxidoreductase

Hydroxylamine oxidoreductases (HAOs) contain a unique haem cofactor called P460that consists of a profoundly ruffledc-type haem with two covalent bonds between the haem porphyrin and a conserved tyrosine. This cofactor is exceptional in that it abstracts electrons from a ligand bound to the haem iron, whereas other haems involved in redox chemistry usually inject electrons into their ligands. The effects of the tyrosine cross-links and of the haem ruffling on the chemistry of this cofactor have been investigated theoretically but are not yet clear. A new crystal structure of an HAO fromCandidatusKuenenia stuttgartiensis, a model organism for anaerobic ammonium oxidation, now shows that its P460cofactor has yet another unexpected reactivity: when ethylene glycol was used as a cryoprotectant, the 1.8 Å resolution electron-density maps showed additional density which could be interpreted as an ethylene glycol molecule covalently bound to the C16atom of the haem ring, opposite the covalent links to the conserved tyrosine. Possible causes for this unexpected reactivity are discussed.

Investigating the active centre of the Scytalidium thermophilum catalase

Almost all monofunctional haem catalases contain a highly conserved core containing the active site, which is connected to the exterior of the enzyme by three channels. These channels have been identified as potential routes for substrate flow and product release. To further investigate the role of these molecular channels, a series of mutants of Scytalidium thermophilum catalase were generated. The three-dimensional structures of four catalase variants, N155A, V123A, V123C and V123T, have been determined at resolutions of 2.25, 1.93, 1.9 and 1.7 Å, respectively. The V123C variant contains a new covalent bond between the S atom of Cys123 and the imidazole ring of the essential His82. This variant enzyme has only residual catalase activity and contains haem b instead of the normal haem d. The H82A variant demonstrates low catalase and phenol oxidase activities (0.2 and 20% of those of recombinant wild-type catalase-phenol oxidase, respectively). The N155A and N155H variants exhibit 4.5 and 3% of the wild-type catalase activity and contain haem d, showing that Asn155 is essential for catalysis but is not required for the conversion of haem b to haem d. Structural analysis suggests that the cause of the effect of these mutations on catalysis is the disruption of the ability of dioxygen substrates to efficiently access the active site. Additional mutants have been characterized biochemically to further probe the roles of the different channels. Introducing smaller or polar side chains in place of Val123 reduces the catalase activity. The F160V, F161V and F168V mutants show a marked decrease in catalase activity but have a much lower effect on the phenol oxidase activity, despite containing substoichiometric amounts of haem.

Heme proteins in lactic acid bacteria

Lactic acid bacteria (LAB) are of profound importance in food production and infection medicine. LAB do not rely on heme (protoheme IX) for growth and are unable to synthesize this cofactor but are generally able to assemble a small repertoire of heme-containing proteins if heme is provided from an exogenous source. These features are in contrast to other bacteria, which synthesize their heme or depend on heme for growth. We here present the cellular function of heme proteins so far identified in LAB and discuss their biogenesis as well as applications of the extraordinary heme physiology of LAB.

Sulfate-reducing bacteria reveal a new branch of tetrapyrrole metabolism

Sulfate-reducing microorganisms are a diverse group of bacteria and archaea that occupy important environmental niches and have potential for significant biotechnological impact. Desulfovibrio, the most studied genus among the sulfate-reducing microorganisms, contains proteins with a wide variety of tetrapyrrole-derived cofactors, including some unique derivatives such as uroporphyrin I and coproporphyrin III. Herein, we review tetrapyrrole metabolism in Desulfovibrio spp., including the production of sirohaem and cobalamin, and compare and contrast the biochemical properties of the enzymes involved in these biosynthetic pathways. Furthermore, we describe a novel pathway used by Desulfovibrio to synthesize haem b, which provides a previously unrecognized link between haem, sirohaem, and haem d(1). Finally, the organization and regulation of genes involved in the tetrapyrrole biosynthetic pathway is discussed.

Thirty years of heme catalases structural biology

About thirty years ago the crystal structures of the heme catalases from Penicillium vitale (PVC) and, a few months later, from bovine liver (BLC) were published. Both enzymes were compact tetrameric molecules with subunits that, despite their size differences and the large phylogenetic separation between the two organisms, presented a striking structural similarity for about 460 residues. The high conservation, confirmed in all the subsequent structures determined, suggested a strong pressure to preserve a functional catalase fold, which is almost exclusively found in these mono-functional heme catalases. However, even in the absence of the catalase fold an efficient catalase activity is also found in the heme containing catalase-peroxidase proteins. The structure of these broad substrate range enzymes, reported for the first time less than ten years ago from the halophilic archaebacterium Haloarcula marismortui (HmCPx) and from the bacterium Burkholderia pseudomallei (BpKatG), showed a heme pocket closely related to that of plant peroxidases, though with a number of unique modifications that enable the catalase reaction. Despite the wealth of structural information already available, for both monofunctional catalases and catalase-peroxidases, a number of unanswered major questions require continuing structural research with truly innovative approaches.

Characterization of 14-3-3 proteins from Cryptosporidium parvum

The parasite Cryptosporidium parvum has three 14-3-3 proteins: Cp14ε, Cp14a and Cp14b, with only Cp14ε similar to human 14-3-3 proteins in sequence, peptide-binding properties and structure. Structurally, Cp14a features the classical 14-3-3 dimer but with a uniquely wide pocket and a disoriented RRY triad potentially incapable of binding phosphopeptides. The Cp14b protein deviates from the norm significantly: (i) In one subunit, the phosphorylated C-terminal tail is bound in the binding groove like a phosphopeptide. This supports our binding study indicating this protein was stabilized by a peptide mimicking its last six residues. (ii) The other subunit has eight helices instead of nine, with αA and αB forming a single helix and occluding the peptide-binding cleft. (iii) The protein forms a degenerate dimer with the two binding grooves divided and facing opposite directions. These features conspire to block and disrupt the bicameral substrate-binding pocket, suggesting a possible tripartite auto-regulation mechanism that has not been observed previously.

ENHANCED VERSION

This article can also be viewed as an enhanced version in which the text of the article is integrated with interactive 3D representations and animated transitions. Please note that a web plugin is required to access this enhanced functionality. Instructions for the installation and use of the web plugin are available in Text S1.

Crystallization and preliminary X-ray analysis of a bifunctional catalase-phenol oxidase from Scytalidium thermophilum

Catalase-phenol oxidase from Scytalidium thermophilum is a bifunctional enzyme: its major activity is the catalase-mediated decomposition of hydrogen peroxide, but it also catalyzes phenol oxidation. To understand the structural basis of this dual functionality, the enzyme, which has been shown to be a tetramer in solution, has been purified by anion-exchange and gel-filtration chromatography and has been crystallized using the hanging-drop vapour-diffusion technique. Streak-seeding was used to obtain larger crystals suitable for X-ray analysis. Diffraction data were collected to 2.8 A resolution at the Daresbury Synchrotron Radiation Source. The crystals belonged to space group P2(1) and contained one tetramer per asymmetric unit.

Biosynthesis of Hemes

This review is concerned specifically with the structures and biosynthesis of hemes in E. coli and serovar Typhimurium. However, inasmuch as all tetrapyrroles share a common biosynthetic pathway, much of the material covered here is applicable to tetrapyrrole biosynthesis in other organisms. Conversely, much of the available information about tetrapyrrole biosynthesis has been gained from studies of other organisms, such as plants, algae, cyanobacteria, and anoxygenic phototrophs, which synthesize large quantities of these compounds. This information is applicable to E. coli and serovar Typhimurium. Hemes play important roles as enzyme prosthetic groups in mineral nutrition, redox metabolism, and gas-and redox-modulated signal transduction. The biosynthetic steps from the earliest universal precursor, 5-aminolevulinic acid (ALA), to protoporphyrin IX-based hemes constitute the major, common portion of the pathway, and other steps leading to specific groups of products can be considered branches off the main axis. Porphobilinogen (PBG) synthase (PBGS; also known as ALA dehydratase) catalyzes the asymmetric condensation of two ALA molecules to form PBG, with the release of two molecules of H2O. Protoporphyrinogen IX oxidase (PPX) catalyzes the removal of six electrons from the tetrapyrrole macrocycle to form protoporphyrin IX in the last biosynthetic step that is common to hemes and chlorophylls. Several lines of evidence converge to support a regulatory model in which the cellular level of available or free protoheme controls the rate of heme synthesis at the level of the first step unique to heme synthesis, the formation of GSA by the action of GTR.

13C NMR Studies of the Electronic Structure of Low-Spin Iron(III) Tetraphenylchlorin Complexes

A series of low-spin six-coordinate (tetraphenylchlorinato)iron(III) complexes [Fe(TPC)(L)2]+/- (L = 1-MeIm, CN-, 4-CNPy, and (t)BuNC) have been prepared, and their (13)C NMR spectra have been examined to reveal the electronic structure. These complexes exist as the mixture of the two isomers with the (d(xy))2(d(xz), d(yz))3 and (d(xz), d(yz))4(d(xy))1 ground states. Contribution of the (d(xz), d(yz))4(d(xy))1 isomer has increased as the axial ligand changes from 1-MeIm, to CN(-) (in CD2Cl2 solution), CN- (in CD(3)OD solution), and 4-CNPy, and then to tBuNC as revealed by the meso and pyrroline carbon chemical shifts; the meso carbon signals at 146 and -19 ppm in [Fe(TPC)(1-MeIm)2]+ shifted to 763 and 700 ppm in [Fe(TPC)(tBuNC)2]+. In the case of the CN- complex, the population of the (d(xz), d(yz))4(d(xy))1 isomer has increased to a great extent when the solvent is changed from CD2Cl2 to CD3OD. The result is ascribed to the stabilization of the d(xz) and d(yz) orbitals of iron(III) caused by the hydrogen bonding between methanol and the coordinated cyanide ligand. Comparison of the 13C NMR data of the TPC complexes with those of the TPP, OEP, and OEC complexes has revealed that the populations of the (d(xz), d(yz))4(d(xy))1 isomer in TPC complexes are much larger than those in the corresponding TPP, OEC, and OEP complexes carrying the same axial ligands.

Catalase: A repertoire of unusual features

Catalases are antioxidant enzymes which catalyze the breakdown of hydrogen peroxide to water and oxygen, and are one of the oldest enzymes to be studied biochemically. The first crystal structure of a catalase appeared in the year 1980 and it revealed the tetrameric nature of the enzyme and presence of channels accessing the deeply buried active site heme. An interesting feature of the tetrameric structure is the characteristic interweaving or arm exchange of the subunits. The recent elucidation of the crystal structure of transport proteins (porins, aquaporins) showed that these proteins are also tetrameric in nature and posses channels. However, recent specific investigations focusing on the roles for these channels, in the mechanism of enzyme action of catalases, revealed significant similarities with that observed for the transport of water and/or glycerol, in aquaporins.

An electrical potential in the access channel of catalases enhances catalysis

Substrate H2O2 must gain access to the deeply buried active site of catalases through channels of 30-50 A in length. The most prominent or main channel approaches the active site perpendicular to the plane of the heme and contains a number of residues that are conserved in all catalases. Changes in Val169, 8 A from the heme in catalase HPII from Escherichia coli, introducing smaller, larger or polar side chains reduces the catalase activity. Changes in Asp181, 12 A from the heme, reduces activity by up to 90% if the negatively charged side chain is removed when Ala, Gln, Ser, Asn, or Ile are the substituted residues. Only the D181E variant retains wild type activity. Determination of the crystal structures of the Glu181, Ala181, Ser181, and Gln181 variants of HPII reveals lower water occupancy in the main channel of the less active variants, particularly at the position forming the sixth ligand to the heme iron and in the hydrophobic, constricted region adjacent to Val169. It is proposed that an electrical potential exists between the negatively charged aspartate (or glutamate) side chain at position 181 and the positively charged heme iron 12 A distant. The potential field acts upon the electrical dipoles of water generating a common orientation that favors hydrogen bond formation and promotes interaction with the heme iron. Substrate hydrogen peroxide would be affected similarly and would enter the active site oriented optimally for interaction with active site residues.

Catalase-peroxidase KatG of Burkholderia pseudomallei at 1.7A resolution

The catalase-peroxidase encoded by katG of Burkholderia pseudomallei (BpKatG) is 65% identical with KatG of Mycobacterium tuberculosis, the enzyme responsible for the activation of isoniazid as an antibiotic. The structure of a complex of BpKatG with an unidentified ligand, has been solved and refined at 1.7A resolution using X-ray synchrotron data collected from crystals flash-cooled with liquid nitrogen. The crystallographic agreement factors R and R(free) are 15.3% and 18.6%, respectively. The crystallized enzyme is a dimer with one modified heme group and one metal ion, likely sodium, per subunit. The modification on the heme group involves the covalent addition of two or three atoms, likely a perhydroxy group, to the secondary carbon atom of the vinyl group on ring I. The added group can form hydrogen bonds with two water molecules that are also in contact with the active-site residues Trp111 and His112, suggesting that the modification may have a catalytic role. The heme modification is in close proximity to an unusual covalent adduct among the side-chains of Trp111, Tyr238 and Met264. In addition, Trp111 appears to be oxidized on C(delta1) of the indole ring. The main channel, providing access of substrate hydrogen peroxide to the heme, contains a region of unassigned electron density consistent with the binding of a pyridine nucleotide-like molecule. An interior cavity, containing the sodium ion and an additional region of unassigned density, is evident adjacent to the adduct and is accessible to the outside through a second funnel-shaped channel. A large cleft in the side of the subunit is evident and may be a potential substrate-binding site with a clear pathway for electron transfer to the active-site heme group through the adduct.

Electronic structure of iron chlorins: characterization of bis(l-valine methyl ester)(meso-tetraphenylchlorin)iron(III)triflate and bis(l-valine methyl ester)(meso-tetraphenylchlorin)iron(II)

The synthesis and characterization of the two iron chlorin complexes [Fe(III)(TPC)(NH(2)CH(CO(2)CH(3))(CH(CH(3))(2)))(2)]CF(3)SO(3) (1) and Fe(II)(TPC)[(NH(2)CH(CO(2)CH(3))(CH(CH(3))(2))](2) (2) are reported. The crystal structure of complex 1 has been determined. The X-ray structure shows that the porphyrinate rings are weakly distorted. The metal-nitrogen distances to the reduced pyrrole N(4), 2.034(4) A, and to the pyrrole trans to it N(2), 2.012(4) A, are longer than the distances to the two remaining nitrogens [N(1), 1.996(4) A, and N(3), 1.984(4) A], leading to a core-hole expansion of the macrocycle due to the reduced pyrrole. The (1)H NMR isotropic shifts at 20 degrees C of the different pyrrole protons of 1 varied from -0.8 to -48.3 ppm according to bis-ligated complexes of low-spin ferric chlorins. The EPR spectrum of [Fe(TPC)(NH(2)CH(CO(2)CH(3))(CH(CH(3))(2)))(2)]CF(3)SO(3) (1) in solution is rhombic and gives the principal g values g(1) = 2.70, g(2) = 2.33, and g(3) = 1.61 (Sigmag(2) = 15.3). These spectroscopic observations are indicative of a metal-based electron in the d(pi) orbital for the [Fe(TPC)(NH(2)CH(CO(2)CH(3))(CH(CH(3))(2)))(2)]CF(3)SO(3) (1) complex with a (d(xy))(2)(d(xz)d(yz))(3) ground state at any temperature. The X-ray structure of the ferrous complex 2 also shows that the porphyrinate rings are weakly distorted. The metal-nitrogen distances to the reduced pyrrole N(4), 1.991(5) A, and to the pyrrole trans to it N(2), 2.005(6) A, are slightly different from the distances to the two remaining nitrogens [N(1), 1.988(5) A, and N(3), 2.015(5) A], leading to a core-hole expansion of the macrocycle due to the reduced pyrrole.

Neurospora crassa catalases, singlet oxygen and cell differentiation

The morphogenetic transitions of the N. crassa asexual life cycle are responses to a hyperoxidant state in which probably singlet oxygen is generated. Induction of catalase activity and catalase oxidation by singlet oxygen are consequences of this recurrent hyperoxidant state. Here the biochemical properties and regulation of two large monofunctional catalases are reviewed, and a new catalase-peroxidase gene and activity is described. Catalase-3 is associated to growing and Catalase-1 to non-growing cells. Under stressful conditions one of these catalases is synthesized, depending on whether growth can be continued or a resistant cell has to be made. The catalase-peroxidase Catalase-2 was possibly derived from a bacterial enzyme. In contrast to the other catalases, Catalase-2 had catalase and peroxidase activity. Catalase-2 was expressed under conditions in which vacuolization of hyphae is observed. All three enzymes have a chlorin in its active site instead of ferroprotoheme IX and are resistant to molar concentrations of hydrogen peroxide. These and all other catalases tested so far are oxidized by singlet oxygen, probably at the heme moiety. The catalase activity is virtually unaffected by oxidation, but the enzymes are probably degraded more rapidly than the unmodified ones.

Molecular and kinetic study of catalase-1, a durable large catalase of Neurospora crassa

Catalase-1 (Cat-1), one of the two monofunctional catalases of Neurospora crassa, increases during asexual spore formation to constitute 0.6% of total protein in conidia. Cat-1 was purified 170-fold with a yield of 48% from conidiating cultures. Like most monofunctional catalases, Cat-1 is a homotetramer, resistant to inactivation by solvents, fully active over a pH range of 4-12, and inactivated by 3-amino-1,2,4-triazole. Unlike most monofunctional catalases, Cat-1 consists of 88 kDa monomers that are glycosylated with alpha-glucose and/or alpha-mannose, is unusually stable, and is not inactivated or inhibited by hydrogen peroxide. Cat-1 was more resistant than other catalases to heat inactivation and to high concentrations of salt and denaturants. Cat-1 exhibited unusual kinetics: at molar concentrations of hydrogen peroxide the apparent V was 10 times higher than at millimolar concentrations. Inactivation of Cat-1 activity with azide and hydroxylamine was according to first order kinetics, while cyanide at micromolar concentrations was a reversible competitive inhibitor.

Theoretical study of the mechanisms of substrate recognition by catalase

A variety of theoretical methods including classical molecular interaction potentials, classical molecular dynamics, and activated molecular dynamics have been used to analyze the substrate recognition mechanisms of peroxisomal catalase from Saccharomyces cerevisiae. Special attention is paid to the existence of channels connecting the heme group with the exterior of the protein. On the basis of these calculations a rationale is given for the unique catalytic properties of this enzyme, as well as for the change in enzyme efficiency related to key mutations. According to our calculations the water is expected to be a competitive inhibitor of the enzyme, blocking the access of hydrogen peroxide to the active site. The main channel is the preferred route for substrate access to the enzyme and shows a cooperative binding to hydrogen peroxide. However, the overall affinity of the main channel for H(2)O(2) is only slightly larger than that for H(2)O. Alternative channels connecting the heme group with the monomer interface and the NADP(H) binding site are detected. These secondary channels might be important for product release.

Tyrosine hydrogen bonds make a large contribution to protein stability

The aim of this study was to gain a better understanding of the contribution of hydrogen bonds by tyrosine -OH groups to protein stability. The amino acid sequences of RNases Sa and Sa3 are 69 % identical and each contains eight Tyr residues with seven at equivalent structural positions. We have measured the stability of the 16 tyrosine to phenylalanine mutants. For two equivalent mutants, the stability increases by 0.3 kcal/mol (RNase Sa Y30F) and 0.5 kcal/mol (RNase Sa3 Y33F) (1 kcal=4.184 kJ). For all of the other mutants, the stability decreases with the greatest decrease being 3.6 kcal/mol for RNase Sa Y52F. Seven of the 16 tyrosine residues form intramolecular hydrogen bonds and the average decrease in stability for these is 2.0(+/-1.0) kcal/mol. For the nine tyrosine residues that do not form intramolecular hydrogen bonds, the average decrease in stability is 0.4(+/-0.6) kcal/mol. Thus, most tyrosine -OH groups contribute favorably to protein stability even if they do not form intramolecular hydrogen bonds. Generally, the stability changes for equivalent positions in the two proteins are remarkably similar. Crystal structures were determined for two of the tyrosine to phenylalanine mutants of RNase Sa: Y80F (1.2 A), and Y86F (1.7 A). The structures are very similar to that of wild-type RNase Sa, and the hydrogen bonding partners of the tyrosine residues always form intermolecular hydrogen bonds to water in the mutants. These results provide further evidence that the hydrogen bonding and van der Waals interactions of polar groups in the tightly packed interior of folded proteins are more favorable than similar interactions with water in the unfolded protein, and that polar group burial makes a substantial contribution to protein stability.

Substrate flow in catalases deduced from the crystal structures of active site variants of HPII from Escherichia coli

The active site of heme catalases is buried deep inside a structurally highly conserved homotetramer. Channels leading to the active site have been identified as potential routes for substrate flow and product release, although evidence in support of this model is limited. To investigate further the role of protein structure and molecular channels in catalysis, the crystal structures of four active site variants of catalase HPII from Escherichia coli (His128Ala, His128Asn, Asn201Ala, and Asn201His) have been determined at approximately 2.0-A resolution. The solvent organization shows major rearrangements with respect to native HPII, not only in the vicinity of the replaced residues but also in the main molecular channel leading to the heme distal pocket. In the two inactive His128 variants, continuous chains of hydrogen bonded water molecules extend from the molecular surface to the heme distal pocket filling the main channel. The differences in continuity of solvent molecules between the native and variant structures illustrate how sensitive the solvent matrix is to subtle changes in structure. It is hypothesized that the slightly larger H(2)O(2) passing through the channel of the native enzyme will promote the formation of a continuous chain of solvent and peroxide. The structure of the His128Asn variant complexed with hydrogen peroxide has also been determined at 2.3-A resolution, revealing the existence of hydrogen peroxide binding sites both in the heme distal pocket and in the main channel. Unexpectedly, the largest changes in protein structure resulting from peroxide binding are clustered on the heme proximal side and mainly involve residues in only two subunits, leading to a departure from the 222-point group symmetry of the native enzyme. An active role for channels in the selective flow of substrates through the catalase molecule is proposed as an integral feature of the catalytic mechanism. The Asn201His variant of HPII was found to contain unoxidized heme b in combination with the proximal side His-Tyr bond suggesting that the mechanistic pathways of the two reactions can be uncoupled.

Understanding the structure and function of catalases: clues from molecular evolution and in vitro mutagenesis

This review gives an overview about the structural organisation of different evolutionary lines of all enzymes capable of efficient dismutation of hydrogen peroxide. Major potential applications in biotechnology and clinical medicine justify further investigations. According to structural and functional similarities catalases can be divided in three subgroups. Typical catalases are homotetrameric haem proteins. The three-dimensional structure of six representatives has been resolved to atomic resolution. The central core of each subunit reveals a characteristic "catalase fold", extremely well conserved among this group. In the native tetramer structure pairs of subunits tightly interact via exchange of their N-terminal arms. This pseudo-knot structures implies a highly ordered assembly pathway. A minor subgroup ("large catalases") possesses an extra flavodoxin-like C-terminal domain. A > or = 25 A long channel leads from the enzyme surface to the deeply buried active site. It enables rapid and selective diffusion of the substrates to the active center. In several catalases NADPH is tightly bound close to the surface. This cofactor may prevent and reverse the formation of compound II, an inactive reaction intermediate. Bifunctional catalase-peroxidase are haem proteins which probably arose via gene duplication of an ancestral peroxidase gene. No detailed structural information is currently available. Even less is know about manganese catalases. Their di-manganese reaction centers may be evolutionary.

Role of the lateral channel in catalase HPII of Escherichia coli

The heme-containing catalase HPII of Escherichia coli consists of a homotetramer in which each subunit contains a core region with the highly conserved catalase tertiary structure, to which are appended N- and C-terminal extensions making it the largest known catalase. HPII does not bind NADPH, a cofactor often found in catalases. In HPII, residues 585-590 of the C-terminal extension protrude into the pocket corresponding to the NADPH binding site in the bovine liver catalase. Despite this difference, residues that define the NADPH pocket in the bovine enzyme appear to be well preserved in HPII. Only two residues that interact ionically with NADPH in the bovine enzyme (Asp212 and His304) differ in HPII (Glu270 and Glu362), but their mutation to the bovine sequence did not promote nucleotide binding. The active-site heme groups are deeply buried inside the molecular structure requiring the movement of substrate and products through long channels. One potential channel is about 30 A in length, approaches the heme active site laterally, and is structurally related to the branched channel associated with the NADPH binding pocket in catalases that bind the dinucleotide. In HPII, the upper branch of this channel is interrupted by the presence of Arg260 ionically bound to Glu270. When Arg260 is replaced by alanine, there is a threefold increase in the catalytic activity of the enzyme. Inhibitors of HPII, including azide, cyanide, various sulfhydryl reagents, and alkylhydroxylamine derivatives, are effective at lower concentration on the Ala260 mutant enzyme compared to the wild-type enzyme. The crystal structure of the Ala260 mutant variant of HPII, determined at 2.3 A resolution, revealed a number of local structural changes resulting in the opening of a second branch in the lateral channel, which appears to be used by inhibitors for access to the active site, either as an inlet channel for substrate or an exhaust channel for reaction products.

Structure of catalase-A from Saccharomyces cerevisiae

The structure of the peroxisomal catalase A from the budding yeast Saccharomyces cerevisiae, with 515 residues per subunit, has been determined and refined to 2.4 A resolution. The crystallographic agreement factors R and Rfree are 15.4% and 19.8%, respectively. A tetramer with accurate 222-molecular symmetry is located in the asymmetric unit of the crystal. The conformation of the central core of catalase A, about 300 residues, remains similar to the structure of catalases from distantly related organisms. In contrast, catalase A lacks a carboxy-terminal domain equivalent to that found in catalase from Penicillium vitalae, the only other fungal catalase structure available. Structural peculiarities related with the heme and NADP(H) binding pockets can be correlated with biochemical characteristics of the catalase A enzyme. The network of molecular cavities and channels, filled with solvent molecules, supports the existence of one major substrate entry and at least two possible alternative pathways to the heme active site. The structure of the variant protein Val111Ala, also determined by X-ray crystallography at 2.8 A resolution, shows a few, well-localized, differences with respect to the wild-type enzyme. These differences, that include the widening of the entry channel in its narrowest point, provide an explanation for both the increased peroxidatic activity and the reduced catalatic activity of this mutant.

Structure of catalase HPII from Escherichia coli at 1.9 A resolution

Catalase HPII from Escherichia coli, a homotetramer of subunits with 753 residues, is the largest known catalase. The structure of native HPII has been refined at 1.9 A resolution using X-ray synchrotron data collected from crystals flash-cooled with liquid nitrogen. The crystallographic agreement factors R and R(free) are respectively 16.6% and 21.0%. The asymmetric unit of the crystal contains a whole molecule that shows accurate 222-point group symmetry. The structure of the central part of the HPII subunit gives a root mean square deviation of 1.5 A for 477 equivalencies with beef liver catalase. Most of the additional 276 residues of HPII are located in either an extended N-terminal arm or in a C-terminal domain organized with a flavodoxin-like topology. A small number of mostly hydrophilic interactions stabilize the relative orientation between the C-terminal domain and the core of the enzyme. The heme component of HPII is a cis-hydroxychlorin gamma-spirolactone in an orientation that is flipped 180 degrees with respect to the orientation of the heme found in beef liver catalase. The proximal ligand of the heme is Tyr415 which is joined by a covalent bond between its Cbeta atom and the Ndelta atom of His392. Over 2,700 well-defined solvent molecules have been identified filling a complex network of cavities and channels formed inside the molecule. Two channels lead close to the distal side heme pocket of each subunit suggesting separate inlet and exhaust functions. The longest channel, that begins in an adjacent subunit, is over 50 A in length, and the second channel is about 30 A in length. A third channel reaching the heme proximal side may provide access for the substrate needed to catalyze the heme modification and His-Tyr bond formation. HPII does not bind NADPH and the equivalent region to the NADPH binding pocket of bovine catalase, partially occluded in HPII by residues 585-590, corresponds to the entrance to the second channel. The heme distal pocket contains two solvent molecules, and the one closer to the iron atom appears to exhibit high mobility or low occupancy compatible with weak coordination.

E. coli HPII catalase interaction with high spin ligands: formate and fluoride as active site probes

E. coli catalase (HPII) wild type and mutant enzymes (heme dcis-containing) were examined (i) to study the role of a distal haem cavity residue, asparagine-201, in high spin ligand binding and (ii) to compare the differences in this binding between heme d and protoheme enzymes such as that from beef liver (BLC). High spin fluoride complexes were formed by all three HPII catalases examined, wild type (201 asn) and 201gln and 201asp mutants, but with a lower fluoride affinity than that of BLC. The binding of fluoride was pH-dependent, indicating that a proton is bound as well as a fluoride anion. HPII 201glu and 201 asp mutants showed lower affinities for fluoride than did wild type, unlike their reactions with cyanide which are essentially independent of the nature of residue 201. The equilibria and rates of fluoride and formate binding to BLC were reexamined. The rates of reaction with formate were similar to those reported previously. Dissociation rates for fluoride-catalase are higher than for formate suggesting that the latter may be bound differently. High spin complexes between formate and all three HPII forms showed a substantially higher affinity than that of BLC for HPII wild type and progressively lower affinities for the two mutants. As with fluoride the reactions were pH-dependent, indicating that a proton is bound together with the formate anion (or that undissociated formic acid is the ligand). The known structures of the heme groups and heme pockets involved are discussed. Formate may be bound by secondary H-bounds within the heme pocket in both heme dcis and protoheme enzymes. The nature of the heme pocket and the heme access channel may be more important than the chemical nature of the prosthetic group in controlling both high spin ligand interactions and reactions with the substrate hydrogen peroxide.

Oxidation of catalase by singlet oxygen

Different bands of catalase activity in zymograms (Cat-1a-Cat-1e) appear during Neurospora crassa development and under stress conditions. Here we demonstrate that singlet oxygen modifies Cat-1a, giving rise to a sequential shift in electrophoretic mobility, similar to the one observed in vivo. Purified Cat-1a was modified with singlet oxygen generated from a photosensitization reaction; even when the reaction was separated from the enzyme by an air barrier, a condition in which only singlet oxygen can reach the enzyme by diffusion. Modification of Cat-1a was hindered when reducing agents or singlet oxygen scavengers were present in the photosensitization reaction. The sequential modification of the four monomers gave rise to five active catalase conformers with more acidic isoelectric points. The pI of purified Cat-1a-Cat-1e decreased progressively, and a similar shift in pI was observed as Cat-1a was modified by singlet oxygen. No further change was detected once Cat-1e was reached. Catalase modification was traced to a three-step reaction of the heme. The heme of Cat-1a gave rise to three additional heme peaks in a high performance liquid chromatography when modified to Cat-1c. Full oxidation to Cat-1e shifted all peaks into a single one. Absorbance spectra were consistent with an increase in asymmetry as heme was modified. Bacterial, fungal, plant, and animal catalases were all susceptible to modification by singlet oxygen, indicating that this is a general feature of the enzyme that could explain in part the variety of catalases seen in several organisms and the modifications observed in some catalases. Modification of catalases during development and under stress could indicate in vivo generation of singlet oxygen.

Identification of a novel bond between a histidine and the essential tyrosine in catalase HPII of Escherichia coli

A bond between the N delta of the imidazole ring of His 392 and the C beta of the essential Tyr 415 has been found in the refined crystal structure at 1.9 A resolution of catalase HPII of Escherichia coli. This novel type of covalent linkage is clearly defined in the electron density map of HPII and is confirmed by matrix-assisted laser desorption/ionization mass spectrometry analysis of tryptic digest mixtures. The geometry of the bond is compatible with both the sp3 hybridization of the C beta atom and the planarity of the imidazole ring. Two mutated variants of HPII active site residues, H128N and N201H, do not contain the His 392-Tyr 415 bond, and their crystal structures show that the imidazole ring of His 392 was rotated, in both cases, by 80 degrees relative to its position in HPII. These mutant forms of HPII are catalytically inactive and do not convert heme b to heme d, suggesting a relationship between the self-catalyzed heme conversion reaction and the formation of the His-Tyr linkage. A model coupling the two processes and involving the reaction of one molecule of H2O2 on the proximal side of the heme with compound 1 is proposed.