Cross-linking of the delta subunit to one of the three alpha subunits has no effect on functioning, as expected if delta is a part of the stator that links the F1 and F0 parts of the Escherichia coli ATP synthase

Mitochondrial responses to anoxia exposure in red eared sliders (Trachemys scripta)

When deprived oxygen, mitochondria from most vertebrates transform from the main site of ATP production to the dominant site of cellular ATP use due to the reverse functioning of the F1FO-ATPase (complex V). The anoxia-tolerant freshwater turtle Trachemys scripta however, has previously been shown to inhibit complex V activity in heart and brain in response to anoxia exposure, but the regulatory mechanism is unknown. To gain insight into the putative regulatory mechanisms underlying the anoxia-induced inhibition of complex V in T. scripta, we examined the effects of two weeks anoxia exposure at 4 °C on the mitochondrial proteome and candidate mechanisms that have been shown to regulate complex V in other organisms. In T. scripta, we confirmed that anoxia exposure resulted in a >80% inhibition of complex V in heart, brain and liver. Incubation of mitochondria with the nitric oxide donor, s-nitrosoglutathione, did not affect complex V activity despite showing the expected inhibition in mice. Proteomics analysis showed anoxia-induced decreases in three peripheral stalk subunits of complex V, possibly pointing to a unique site of regulation. Proteomics analysis also revealed differential expression of numerous enzymes involved with the electron transport system, the tricarboxylic acid cycle, as well as lipid and amino acid metabolism in response to anoxia exposure.

The Biological Role of the ζ Subunit as Unidirectional Inhibitor of the F1FO-ATPase of Paracoccus denitrificans

The biological roles of the three natural F₁F_O-ATPase inhibitors, ε, ζ, and IF₁, on cell physiology remain controversial. The ζ subunit is a useful model for deletion studies since it mimics mitochondrial IF₁, but in the F₁F_O-ATPase of Paracoccus denitrificans (PdF₁F_O), it is a monogenic and supernumerary subunit. Here, we constructed a P. denitrificans 1222 derivative (PdΔζ) with a deleted ζ gene to determine its role in cell growth and bioenergetics. The results show that the lack of ζ in vivo strongly restricts respiratory P. denitrificans growth, and this is restored by complementation in trans with an exogenous ζ gene. Removal of ζ increased the coupled PdF₁F_O-ATPase activity without affecting the PdF₁F_O-ATP synthase turnover, and the latter was not affected at all by ζ reconstitution in vitro. Therefore, ζ works as a unidirectional pawl-ratchet inhibitor of the PdF₁F_O-ATPase nanomotor favoring the ATP synthase turnover to improve respiratory cell growth and bioenergetics.

Mitochondrial Respiratory Chain Complexes

Mitochondria are the power stations of the eukaryotic cell, using the energy released by the oxidation of glucose and other sugars to produce ATP. Electrons are transferred from NADH, produced in the citric acid cycle in the mitochondrial matrix, to oxygen by a series of large protein complexes in the inner mitochondrial membrane, which create a transmembrane electrochemical gradient by pumping protons across the membrane. The flow of protons back into the matrix via a proton channel in the ATP synthase leads to conformational changes in the nucleotide binding pockets and the formation of ATP. The three proton pumping complexes of the electron transfer chain are NADH-ubiquinone oxidoreductase or complex I, ubiquinone-cytochrome c oxidoreductase or complex III, and cytochrome c oxidase or complex IV. Succinate dehydrogenase or complex II does not pump protons, but contributes reduced ubiquinone. The structures of complex II, III and IV were determined by x-ray crystallography several decades ago, but complex I and ATP synthase have only recently started to reveal their secrets by advances in x-ray crystallography and cryo-electron microscopy. The complexes I, III and IV occur to a certain extent as supercomplexes in the membrane, the so-called respirasomes. Several hypotheses exist about their function. Recent cryo-electron microscopy structures show the architecture of the respirasome with near-atomic detail. ATP synthase occurs as dimers in the inner mitochondrial membrane, which by their curvature are responsible for the folding of the membrane into cristae and thus for the huge increase in available surface that makes mitochondria the efficient energy plants of the eukaryotic cell.

Catalytic robustness and torque generation of the F1-ATPase

The F₁-ATPase is the catalytic portion of the F_oF₁ ATP synthase and acts as a rotary molecular motor when it hydrolyzes ATP. Two decades have passed since the single-molecule rotation assay of F₁-ATPase was established. Although several fundamental issues remain elusive, basic properties of F-type ATPases as motor proteins have been well characterized, and a large part of the reaction scheme has been revealed by the combination of extensive structural, biochemical, biophysical, and theoretical studies. This review is intended to provide a concise summary of the fundamental features of F₁-ATPases, by use of the well-described model F₁ from the thermophilic Bacillus PS3 (TF₁). In the last part of this review, we focus on the robustness of the rotary catalysis of F₁-ATPase to provide a perspective on the re-designing of novel molecular machines.

ATP Synthesis by Oxidative Phosphorylation

The F1F0-ATP synthase (EC 3.6.1.34) is a remarkable enzyme that functions as a rotary motor. It is found in the inner membranes of Escherichia coli and is responsible for the synthesis of ATP in response to an electrochemical proton gradient. Under some conditions, the enzyme functions reversibly and uses the energy of ATP hydrolysis to generate the gradient. The ATP synthase is composed of eight different polypeptide subunits in a stoichiometry of α3β3γδεab2c10. Traditionally they were divided into two physically separable units: an F1 that catalyzes ATP hydrolysis (α3β3γδε) and a membrane-bound F0 sector that transports protons (ab2c10). In terms of rotary function, the subunits can be divided into rotor subunits (γεc10) and stator subunits (α3β3δab2). The stator subunits include six nucleotide binding sites, three catalytic and three noncatalytic, formed primarily by the β and α subunits, respectively. The stator also includes a peripheral stalk composed of δ and b subunits, and part of the proton channel in subunit a. Among the rotor subunits, the c subunits form a ring in the membrane, and interact with subunit a to form the proton channel. Subunits γ and ε bind to the c-ring subunits, and also communicate with the catalytic sites through interactions with α and β subunits. The eight subunits are expressed from a single operon, and posttranscriptional processing and translational regulation ensure that the polypeptides are made at the proper stoichiometry. Recent studies, including those of other species, have elucidated many structural and rotary properties of this enzyme.

Structural divergence of the rotary ATPases

The rotary ATPase family of membrane protein complexes may have only three members, but each one plays a fundamental role in biological energy conversion. The F1Fo-ATPase (F-ATPase) couples ATP synthesis to the electrochemical membrane potential in bacteria, mitochondria and chloroplasts, while the vacuolar H+-ATPase (V-ATPase) operates as an ATP-driven proton pump in eukaryotic membranes. In different species of archaea and bacteria, the A1Ao-ATPase (A-ATPase) can function as either an ATP synthase or an ion pump. All three of these multi-subunit complexes are rotary molecular motors, sharing a fundamentally similar mechanism in which rotational movement drives the energy conversion process. By analogy to macroscopic systems, individual subunits can be assigned to rotor, axle or stator functions. Recently, three-dimensional reconstructions from electron microscopy and single particle image processing have led to a significant step forward in understanding of the overall architecture of all three forms of these complexes and have allowed the organisation of subunits within the rotor and stator parts of the motors to be more clearly mapped out. This review describes the emerging consensus regarding the organisation of the rotor and stator components of V-, A- and F-ATPases, examining core similarities that point to a common evolutionary origin, and highlighting key differences. In particular, it discusses how newly revealed variation in the complexity of the inter-domain connections may impact on the mechanics and regulation of these molecular machines.

Biogenesis of membrane bound respiratory complexes in Escherichia coli

Escherichia coli is one of the preferred bacteria for studies on the energetics and regulation of respiration. Respiratory chains consist of primary dehydrogenases and terminal reductases or oxidases linked by quinones. In order to assemble this complex arrangement of protein complexes, synthesis of the subunits occurs in the cytoplasm followed by assembly in the cytoplasm and/or membrane, the incorporation of metal or organic cofactors and the anchoring of the complex to the membrane. In the case of exported metalloproteins, synthesis, assembly and incorporation of metal cofactors must be completed before translocation across the cytoplasmic membrane. Coordination data on these processes is, however, scarce. In this review, we discuss the various processes that respiratory proteins must undergo for correct assembly and functional coupling to the electron transport chain in E. coli. Targeting to and translocation across the membrane together with cofactor synthesis and insertion are discussed in a general manner followed by a review of the coordinated biogenesis of individual respiratory enzyme complexes. Lastly, we address the supramolecular organization of respiratory enzymes into supercomplexes and their localization to specialized domains in the membrane.

What is the role of epsilon in the Escherichia coli ATP synthase?

The ATP synthase from Escherichia coli is a prototype of the ATP synthases that are found in many bacteria, in the mitochondria of eukaryotes, and in the chloroplasts of plants. It contains eight different types of subunits that have traditionally been divided into F(1), a water-soluble catalytic sector, and F(o), a membrane-bound ion transporting sector. In the current rotary model for ATP synthesis, the subunits can be divided into rotor and stator subunits. Several lines of evidence indicate that epsilon is one of the three rotor subunits, which rotate through 360 degrees. The three-dimensional structure of epsilon is known and its interactions with other subunits have been explored by several approaches. In light of recent work by our group and that of others, the role of epsilon in the ATP synthase from E. coli is discussed.

Modulation at a distance of proton conductance through the Saccharomyces cerevisiae mitochondrial F1F0-ATP synthase by variants of the oligomycin sensitivity-conferring protein containing substitutions near the C-terminus

We have sought to elucidate how the oligomycin sensitivity-conferring protein (OSCP) of the mitochondrial F(1)F(0)-ATP synthase (mtATPase) can influence proton channel function. Variants of OSCP, from the yeast Saccharomyces cerevisiae, having amino acid substitutions at a strictly conserved residue (Gly166) were expressed in place of normal OSCP. Cells expressing the OSCP variants were able to grow on nonfermentable substrates, albeit with some increase in generation time. Moreover, these strains exhibited increased sensitivity to oligomycin, suggestive of modification in functional interactions between the F(1) and F(0) sectors mediated by OSCP. Bioenergetic analysis of mitochondria from cells expressing OSCP variants indicated an increased respiratory rate under conditions of no net ATP synthesis. Using specific inhibitors of mtATPase, in conjunction with measurement of changes in mitochondrial transmembrane potential, it was revealed that this increased respiratory rate was a result of increased proton flux through the F(0) sector. This proton conductance, which is not coupled to phosphorylation, is exquisitely sensitive to inhibition by oligomycin. Nevertheless, the oxidative phosphorylation capacity of these mitochondria from cells expressing OSCP variants was no different to that of the control. These results suggest that the incorporation of OSCP variants into functional ATP synthase complexes can display effects in the control of proton flux through the F(0) sector, most likely mediated through altered protein-protein contacts within the enzyme complex. This conclusion is supported by data indicating impaired stability of solubilized mtATPase complexes that is not, however, reflected in the assembly of functional enzyme complexes in vivo. Given a location for OSCP atop the F(1)-alpha(3)beta(3) hexamer that is distant from the proton channel, then the modulation of proton flux by OSCP must occur "at a distance." We consider how subtle conformational changes in OSCP may be transmitted to F(0).

The oligomycin axis of mitochondrial ATP synthase: OSCP and the proton channel

Oligomycin has long been known as an inhibitor of mitochondrial ATP synthase, putatively binding the F(o) subunits 9 and 6 that contribute to proton channel function of the complex. As its name implies, OSCP is the oligomycin sensitivity-conferring protein necessary for the intact enzyme complex to display sensitivity to oligomycin. Recent advances concerning the structure and mechanism of mitochondrial ATP synthase have led to OSCP now being considered a component of the peripheral stator stalk rather than a central stalk component. How OSCP confers oligomycin sensitivity on the enzyme is unknown, but probably reflects important protein-protein interactions made within the assembled complex and transmitted down the stator stalk, thereby influencing proton channel function. We review here our studies directed toward establishing the stoichiometry, assembly, and function of OSCP in the context of knowledge of the organization of the stator stalk and the proton channel.

Low resolution structure of subunit b (b (22-156)) of Escherichia coli F(1)F(O) ATP synthase in solution and the b-delta assembly

The first low resolution solution structure of the soluble domain of subunit b (b (22-156)) of the Escherichia coli F(1)F(O) ATPsynthase was determined from small-angle X-ray scattering data. The dimeric protein has a boomerang-like shape with a total length of 16.2 +/- 0.3 nm. Fluorescence correlation spectroscopy (FCS) shows that the protein binds effectively to the subunit delta, confirming their described neighborhood. Using the recombinant C-terminal domain (delta(91-177)) of subunit delta and the C-terminal peptides of subunit b, b (120-140) and b (140-156), FCS titration experiments were performed to assign the segments involved in delta-b assembly. These data identify the very C-terminal tail b (140-156) to interact with delta(91-177). The novel 3D structure of this peptide has been determined by NMR spectroscopy. The molecule adopts a stable helix formation in solution with a flexible tail between amino acid 140 to 145.

The b (arg36) contributes to efficient coupling in F(1)F (O) ATP synthase in Escherichia coli

In Escherichia coli, the F(1)F(O) ATP synthase b subunits house a conserved arginine in the tether domain at position 36 where the subunit emerges from the membrane. Previous experiments showed that substitution of isoleucine or glutamate result in a loss of enzyme activity. Double mutants have been constructed in an attempt to achieve an intragenic suppressor of the b (arg36-->ile) and the b (arg36-->glu) mutations. The b (arg36-->ile) mutation could not be suppressed. In contrast, the phenotypic defect resulting from the b (arg36-->glu) mutation was largely suppressed in the b (arg36-->glu,glu39-->arg) double mutant. E. coli expressing the b (arg36-->glu,glu39-->arg) subunit grew well on succinate-based medium. F(1)F(O) ATP synthase complexes were more efficiently assembled and ATP driven proton pumping activity was improved. The evidence suggests that efficient coupling in F(1)F(O) ATP synthase is dependent upon a basic amino acid located at the base of the peripheral stalk.

The structure and function of mitochondrial F1F0-ATP synthases

We review recent advances in understanding of the structure of the F(1)F(0)-ATP synthase of the mitochondrial inner membrane (mtATPase). A significant achievement has been the determination of the structure of the principal peripheral or stator stalk components bringing us closer to achieving the Holy Grail of a complete 3D structure for the complex. A major focus of the field in recent years has been to understand the physiological significance of dimers or other oligomer forms of mtATPase recoverable from membranes and their relationship to the structure of the cristae of the inner mitochondrial membrane. In addition, the association of mtATPase with other membrane proteins has been described and suggests that further levels of functional organization need to be considered. Many reports in recent years have concerned the location and function of ATP synthase complexes or its component subunits on the external surface of the plasma membrane. We consider whether the evidence supports complete complexes being located on the cell surface, the biogenesis of such complexes, and aspects of function especially related to the structure of mtATPase.

Interaction of ADP and ATP with noncatalytic sites of isolated and membrane-bound chloroplast coupling factor CF1

This study of ATP and ADP binding to noncatalytic sites of membrane-bound CF1 (ATP synthase) revealed two noncatalytic sites with different specificities and affinities for nucleotides. One of these is characterized by a high affinity and specificity to ADP (Kd=2.6+/-0.3 microM). However, a certain increase in ADP apparent dissociation constant at high ATP/ADP ratio in the medium allows a possibility that ATP binds to this site as well. The other site displays high specificity to ATP. When the ADP-binding site is vacant, it shows a comparatively low affinity for ATP, which greatly increases with increasing ADP concentration accompanied by filling of the ADP-binding site. The reported specificities of these two sites are independent of thylakoid membrane energization, since both in the dark and in the light the ratios of ATP/ADP tightly bound to the noncatalytic sites were very close. The difference in noncatalytic site affinity for ATP and ADP is shown to depend on the amount of delta subunit in a particular sample. Thylakoid membrane ATP synthase, with stoichiometric content of delta-subunit (one delta-subunit per CF1 molecule), showed the maximal difference in ADP and ATP affinities for the noncatalytic sites. For CF1, with substoichiometric delta subunit values, this difference was less, and after delta subunit removal it decreased still more.

Biological application of multi-component nanowires in hybrid devices powered by F1-ATPase motors

In this paper, construction of hybrid device by integrating nanowires with F(1)-ATPase motors is described. The nickel nanowires and multi-segment nanowires, including gold and nickel, were fabricated by electrochemical deposition in nanoporous templates. The nickel nanowires functionalized by biotinylated peptide can be assembled directly onto F(1)-ATPase motors to act as the propellers. If the multi-component nanowires, including gold and nickel, were selectively functionalized by the thiol group modified ssDNA and the synthetic peptide, respectively, the biotinylated F(1)-ATPase motors can be attached to the biotinylated peptide on nickel segment of the nanowires. Then, the multi-component nanowires can also be used as the propellers, and one may observe the rotations of the multi-component nanowires driven by F(1)-ATPase motors. Therefore, introduction of multiple segments along the length of a nanowire can lead to a variety of multiple chemical functionalities, which can be selectively bound to cells and special biomolecules. This method provides an insight for the construction of other hybrid devices with its controlling arrangement of different biomolecule on designed nanometer scale structures.

The peripheral stalk of the mitochondrial ATP synthase

The peripheral stalk of F-ATPases is an essential component of these enzymes. It extends from the membrane distal point of the F1 catalytic domain along the surface of the F1 domain with subunit a in the membrane domain. Then, it reaches down some 45 A to the membrane surface, and traverses the membrane, where it is associated with the a-subunit. Its role is to act as a stator to hold the catalytic alpha3beta3 subcomplex and the a-subunit static relative to the rotary element of the enzyme, which consists of the c-ring in the membrane and the attached central stalk. The central stalk extends up about 45 A from the membrane surface and then penetrates into the alpha3beta3 subcomplex along its central axis. The mitochondrial peripheral stalk is an assembly of single copies of the oligomycin sensitivity conferral protein (the OSCP) and subunits b, d and F6. In the F-ATPase in Escherichia coli, its composition is simpler, and it consists of a single copy of the delta-subunit with two copies of subunit b. In some bacteria and in chloroplasts, the two copies of subunit b are replaced by single copies of the related proteins b and b' (known as subunits I and II in chloroplasts). As summarized in this review, considerable progress has been made towards establishing the structure and biophysical properties of the peripheral stalk in both the mitochondrial and bacterial enzymes. However, key issues are unresolved, and so our understanding of the role of the peripheral stalk and the mechanism of synthesis of ATP are incomplete.

ATP synthase: subunit-subunit interactions in the stator stalk

In ATP synthase, proton translocation through the Fo subcomplex and ATP synthesis/hydrolysis in the F1 subcomplex are coupled by subunit rotation. The static, non-rotating portions of F1 and Fo are attached to each other via the peripheral "stator stalk", which has to withstand elastic strain during subunit rotation. In Escherichia coli, the stator stalk consists of subunits b2delta; in other organisms, it has three or four different subunits. Recent advances in this area include affinity measurements between individual components of the stator stalk as well as a detailed analysis of the interaction between subunit delta (or its mitochondrial counterpart, the oligomycin-sensitivity conferring protein, OSCP) and F1. The current status of our knowledge of the structure of the stator stalk and of the interactions between its subunits will be discussed in this review.

ADP and ATP binding to noncatalytic sites of thiol-modulated chloroplast ATP synthase

A modified 'cold chase' technique was used to study tight [(14)C]ADP and [(14)C]ATP binding to noncatalytic sites of chloroplast ATP synthase (CF(0)F(1)). The binding was very low in the dark and sharply increased with light intensity. Dissociation of labeled nucleotides incorporated into noncatalytic sites of CF(0)F(1 )or CF(1) reconstituted with EDTA-treated thylakoid membranes was also found to be light-dependent. Time dependence of nucleotide dissociation is described by the first order equation with a k (d) of about 5 min(-1). The exposure of thylakoid membranes to 0.7-24.8 muM nucleotides leads to filling of up to two noncatalytic sites of CF(0)F(1). The sites differ in their specificity: one preferentially binds ADP, whereas the other - ATP. A much higher ATP/ADP ratio of nucleotides bound at noncatalytic sites of isolated CF(1) dramatically decreases upon its reconstitution with EDTA-treated thylakoid membranes. It is suggested that the decrease is caused by conformational changes in one of the alpha subunits induced by its interaction with the delta subunit and/or subunit I-II when CF(1) becomes bound to a thylakoid membrane.

Manipulating the length of the b subunit F1 binding domain in F1F0 ATP synthase from Escherichia coli

The peripheral stalk of F(1)F(0) ATP synthase is composed of a parallel homodimer of b subunits that extends across the cytoplasmic membrane in F(0) to the top of the F(1) sector. The stalk serves as the stator necessary for holding F(1) against movement of the rotor. A series of insertions and deletions have been engineered into the hydrophilic domain that interacts with F(1). Only the hydrophobic segment from val-121 to ala-132 and the extreme carboxyl terminus proved to be highly sensitive to mutation. Deletions in either site apparently abolished enzyme function as a result of defects is assembly of the F(1)F(0) complex. Other mutations manipulating the length of the sequence between these two areas had only limited effects on enzyme function. Expression of a b subunit with insertions with as few as two amino acids into the hydrophobic segment also resulted in loss of F(1)F(0) ATP synthase. However, a fully defective b subunit with seven additional amino acids could be stabilized in a heterodimeric peripheral stalk within a functional F(1)F(0) complex by a normal b subunit.

Structural Characterization of the Interaction of the δ and α Subunits of the Escherichia coli F1F0-ATP Synthase by NMR Spectroscopy,

A critical point of interaction between F(1) and F(0) in the bacterial F(1)F(0)-ATP synthase is formed by the alpha and delta subunits. Previous work has shown that the N-terminal domain (residues 3-105) of the delta subunit forms a 6 alpha-helix bundle [Wilkens, S., Dunn, S. D., Chandler, J., Dahlquist, F. W., and Capaldi, R. A. (1997) Nat. Struct. Biol. 4, 198-201] and that the majority of the binding energy between delta and F(1) is provided by the interaction between the N-terminal 22 residues of the alpha- and N-terminal domain of the delta subunit [Weber, J., Muharemagic, A., Wilke-Mounts, S., and Senior, A. E. (2003) J. Biol. Chem. 278, 13623-13626]. We have now analyzed a 1:1 complex of the delta-subunit N-terminal domain and a peptide comprising the N-terminal 22 residues of the alpha subunit by heteronuclear protein NMR spectroscopy. A comparison of the chemical-shift values of delta-subunit residues with and without alpha N-terminal peptide bound indicates that the binding interface on the N-terminal domain of the delta subunit is formed by alpha helices I and V. NOE cross-peak patterns in 2D (12)C/(12)C-filtered NOESY spectra of the (13)C-labeled delta-subunit N-terminal domain in complex with unlabeled peptide verify that residues 8-18 in the alpha-subunit N-terminal peptide are folded as an alpha helix when bound to delta N-terminal domain. On the basis of intermolecular contacts observed in (12)C/(13)C-filtered NOESY experiments, we describe structural details of the interaction of the delta-subunit N-terminal domain with the alpha-subunit N-terminal alpha helix.

Defined Sites of Interaction between Subunits E (Vma4p), C (Vma5p), and G (Vma10p) within the Stator Structure of the Vacuolar H+-ATPase†

Vacuolar H(+)-ATPases (V-ATPases) are multi-subunit membrane proteins that couple ATP hydrolysis to the extrusion of protons from the cytoplasm. Although they share a common macromolecular architecture and rotational mechanism with the F(1)F(0)-ATPases, the organization of many of the specialized V-ATPase subunits within this rotary molecular motor remains uncertain. In this study, we have identified sequence segments involved in linking putative stator subunits in the Saccharomyces V-ATPase. Precipitation assays revealed that subunits Vma5p (subunit C) and Vma10p (subunit G), expressed as glutathione-S-transferase fusion proteins in E. coli, are both able to interact strongly with Vma4p (subunit E) expressed in a cell-free system. GST-Vma10p also associated with Vma2p and Vma1p, the core subunits of the ATP-hydrolyzing domain, and was able to self-associate to form a dimer. Mutations within the first 19-residue region of Vma4p, which disrupted interaction with Vma5p in vitro, also prevented the Vma4p polypeptide from restoring V-ATPase function in a complementation assay in vivo. These mutations did not prevent assembly of Vma5p (subunit C) and Vma2p (subunit B) into an inactive complex at the vacuolar membrane, indicating that Vma5p must make multiple interactions involving other V-ATPase subunits. A second, highly conserved region of Vma4p between residues 19 and 38 is involved in binding Vma10p. This region is highly enriched in charged residues, suggesting a role for electrostatic effects in Vma4p-Vma10p interaction. These protein interaction studies show that the N-terminal region of Vma4p is a key factor not only in the stator structure of the V-ATPase rotary molecular motor, but also in mediating interactions with putative regulatory subunits.

Subunit structure, function, and arrangement in the yeast and coated vesicle V-ATPases

The vacuolar (H+)-ATPases (or V-ATPases) are ATP-dependent proton pumps that function both to acidify intracellular compartments and to transport protons across the plasma membrane. Acidification of intracellular compartments is important for such processes as receptor-mediated endocytosis, intracellular trafficking, protein processing, and coupled transport. Plasma membrane V-ATPases function in renal acidification, bone resorption, pH homeostasis, and, possibly, tumor metastasis. This review will focus on work from our laboratories on the V-ATPases from mammalian clathrin-coated vesicles and from yeast. The V-ATPases are composed of two domains. The peripheral V1 domain has a molecular mass of 640 kDa and is composed of eight different subunits (subunits A-H) of molecular mass 70-13 kDa. The integral V0 domain, which has a molecular mass of 260 kDa, is composed of five different subunits (subunits a, d, c, c', and c'') of molecular mass 100-17 kDa. The V1 domain is responsible for ATP hydrolysis whereas the V0 domain is responsible for proton transport. Using a variety of techniques, including cysteine-mediated crosslinking and electron microscopy, we have defined both the overall shape of the V-ATPase and the V0 domain as well as the location of various subunits within the complex. We have employed site-directed and random mutagenesis to identify subunits and residues involved in nucleotide binding and hydrolysis, proton translocation, and the coupling of these two processes. We have also investigated the mechanism of regulation of the V-ATPase by reversible dissociation and the role of different subunits in this process.

Analysis of sequence determinants of F1Fo-ATP synthase in the N-terminal region of alpha subunit for binding of delta subunit

The stator in F(1)F(o)-ATP synthase resists strain generated by rotor torque. In Escherichia coli, the b(2)delta subunit complex comprises the stator, bound to subunit a in F(o) and to the alpha(3)beta(3) hexagon of F(1). Previous work has shown that N-terminal residues of alpha subunit are involved in binding delta. A synthetic peptide consisting of the first 22 residues of alpha (alphaN1-22) binds specifically to isolated wild-type delta subunit with 1:1 stoichiometry and high affinity, accounting for a major portion of the binding energy between delta and F(1). Residues alpha6-18 are predicted by secondary structure algorithms and helical wheels to be alpha-helical and amphipathic, and a potential helix capping box occurs at residues alpha3-8. We introduced truncations, deletions, and mutations into alphaN1-22 peptide and examined their effects on binding to the delta subunit. The deletions and mutations were introduced also into the N-terminal region of the uncA (alpha subunit) gene to determine effects on cell growth in vivo and membrane ATP synthase activity in vitro. Effects seen in the peptides were well correlated with those seen in the uncA gene. The results show that, with the possible exception of residues close to the initial Met, all of the alphaN1-22 sequence is required for binding of delta to alpha. Within this sequence, an amphipathic helix seems important. Hydrophobic residues on the predicted nonpolar surface are important for delta binding, namely alphaIle-8, alphaLeu-11, alphaIle-12, alphaIle-16, and alphaPhe-19. Several or all of these residues probably make direct interaction with helices 1 and 5 of delta. The potential capping box sequence per se appeared less important. Impairment of alpha/delta binding brings about functional impairment due to reduced level of assembly of ATP synthase in cells.

Functional Consequences of N- or C-Terminal Deletions of the δ Subunit of Chloroplast ATP Synthase

Mutagenesis was used to generate seven truncation mutants of the spinach (Spinacia oleracea) chloroplast ATP synthase delta subunit lacking 5, 11, 17, or 35 amino acid residues from the N-terminus or 3, 9, or 15 residues from the C-terminus. Interactions between these mutants and all other subunits of the chloroplast ATPase were investigated by a yeast two-hybrid system. The results indicate that the N-terminal deletions mainly affected interactions between the delta subunit and the other part of CF(1), but did not significantly affect interactions with the CF(0) sector. In contrast, C-terminal truncations of the delta subunit mainly affected its interaction with the CF(0) sector and caused little impairment in interactions with the other part of CF(1). The conformation of the delta subunit C-terminal domain seems to be more sensitive to the truncations, as shown by minimal expression driven by C-terminal deleted (nine residues) mutants. Further studies showed C-terminal truncations of the delta subunit greatly impaired its ability to restore cyclic photophosphorylation in NaBr vesicles, whereas N-terminal truncations had little effect on the ability of delta to plug the CF(0) channel. None of the mutants impaired ATP hydrolysis by CF(1).

Structure of the mitochondrial ATP synthase by electron cryomicroscopy

We have determined the structure of intact ATP synthase from bovine heart mitochondria by electron cryomicroscopy of single particles. Docking of an atomic model of the F1-c10 subcomplex into a major segment of the map has allowed the 32 A resolution density to be interpreted as the F1-ATPase, a central and a peripheral stalk and an FO membrane region that is composed of two domains. One domain of FO corresponds to the ring of c-subunits, and the other probably contains the a-subunit, the transmembrane portion of the b-subunit and the remaining integral membrane proteins of FO. The peripheral stalk wraps around the molecule and connects the apex of F1 to the second domain of FO. The interaction of the peripheral stalk with F1-c10 implies that it binds to a non-catalytic alpha-beta interface in F1 and its inclination where it is not attached to F1 suggests that it has a flexible region that can serve as a stator during both ATP synthesis and ATP hydrolysis.

Quantitative determination of direct binding of b subunit to F1 in Escherichia coli F1F0-ATP synthase

The stator in F(1)F(0)-ATP synthase resists strain generated by rotor torque. In Escherichia coli, the b(2)delta subunit complex comprises the stator, bound to subunit a in F(0) and to the alpha(3)beta(3) hexagon of F(1). To quantitatively characterize binding of b subunit to the F(1) alpha(3)beta(3) hexagon, we developed fluorimetric assays in which wild-type F(1), or F(1) enzymes containing introduced Trp residues, were titrated with a soluble portion of the b subunit (b(ST34-156)). With five different F(1) enzymes, K(d)(b(ST34-156)) ranged from 91 to 157 nm. Binding was strongly Mg(2+)-dependent; in EDTA buffer, K(d)(b(ST34-156)) was increased to 1.25 microm. The addition of the cytoplasmic portion of the b subunit increases the affinity of binding of delta subunit to delta-depleted F(1). The apparent K(d)(b(ST34-156)) for this effect was increased from 150 nm in Mg(2+) buffer to 1.36 microm in EDTA buffer. This work demonstrates quantitatively how binding of the cytoplasmic portion of the b subunit directly to F(1) contributes to stator resistance and emphasizes the importance of Mg(2+) in stator interactions.

FRET reveals changes in the F1–stator stalk interaction during activity of F1F0-ATP synthase

A stator is proposed as necessary to prevent futile rotation of the F(1) catalytic sector of mitochondrial ATP synthase (mtATPase) during periods of ATP synthesis or ATP hydrolysis. Although the second stalk of mtATPase is generally believed to fulfil the role of a stator capable of withstanding the stress produced by rotation of the central rotor, there is little evidence to directly support this view. We show that interaction between two candidate proteins of the second stalk, OSCP and subunit b, fused at their C-termini to GFP variants and assembled into functional mtATPase can be monitored in mitochondria using fluorescence resonance energy transfer (FRET). Substitution of native OSCP with a variant containing a glycine 166 to asparagine (G166N) substitution yielded a metastable complex. In contrast to the enzyme containing native OSCP, FRET could be irreversibly lowered for the enzyme containing G166N at a rate that correlated closely with the rate of enzyme activity (ATP hydrolysis). The non-hydrolysable ATP analogue, AMP-PCP did not have this effect. We conclude that two candidate proteins of the stator stalk, OSCP and b, are subject to stresses during enzyme catalytic activity commensurate with their role as a part of a stator stalk.

Yeast V1-ATPase: affinity purification and structural features by electron microscopy

V1-ATPase from the yeast Saccharomyces cerevisiae was purified via a FLAG affinity tag introduced into the N terminus of the G subunit. The preparation migrated as a single band in native gel electrophoresis and contained subunits ABCDEFGH (with subunit C present at substoichiometric amounts) as determined by matrix-assisted laser desorption ionization time-of-flight mass spectrometry. The initial specific Ca-ATPase activity was approximately 6 micromol/min/mg. The structure of the yeast V1-ATPase was studied by electron microscopy of negatively stained and frozen hydrated samples. A 25-A resolution three-dimensional model of the complex was calculated from two-dimensional projections by the angular reconstitution technique. The model shows six elongated densities arranged in pseudo-3-fold symmetry around a large central cavity. At the top of the molecule, various protrusions can be seen. At the bottom of the complex, two large masses are visible that are connected to the main body of the molecule. Comparison of the yeast V1 structure with the structure of the intact V1V0-ATPase from bovine brain clathrin-coated vesicles (Wilkens, S., Vasilyeva, E., and Forgac, M. (1999) J. Biol. Chem. 274, 31804-31810) indicates that the structure of the isolated V1 from yeast is very similar to the structure of the V1 domain in the intact V-ATPase complex.

Interacting helical surfaces of the transmembrane segments of subunits a and c' of the yeast V-ATPase defined by disulfide-mediated cross-linking

Proton translocation by the vacuolar (H+)-ATPase (or V-ATPase) has been shown by mutagenesis to be dependent upon charged residues present within transmembrane segments of subunit a as well as the three proteolipid subunits (c, c', and c"). Interaction between R735 in TM7 of subunit a and the glutamic acid residue in the middle of TM4 of subunits c and c' or TM2 of subunit c" has been proposed to be essential for proton release to the luminal compartment. In order to determine whether the helical face of TM7 of subunit a containing R735 is capable of interacting with the helical face of TM4 of subunit c' containing the essential glutamic acid residue (Glu-145), cysteine-mediated cross-linking between these subunits in yeast has been performed. Cys-less forms of subunits a and c' as well as forms containing unique cysteine residues were constructed, introduced together into a strain disrupted in both endogenous subunits, and tested for growth at neutral pH, for assembly competence and for cross-linking in the presence of cupric-phenanthroline by SDS-PAGE and Western blot analysis. Four different cysteine mutants of subunit a were each tested pairwise with ten different unique cysteine mutants of subunit c'. Strong cross-linking was observed for the pairs aS728C/c'I142C, aA731C/c'E145C, aA738C/c'F143C, aA738C/c'L147C, and aL739C/c'L147C. Partial cross-linking was observed for an additional 13 of 40 pairs analyzed. When arrayed on a helical wheel diagram, the results suggest that the helical face of TM7 of subunit a containing Arg-735 interacts with the helical face of TM4 of subunit c' centered on Val-146 and bounded by Glu-145 and Leu-147. The results are consistent with a possible rotational flexibility of one or both of these transmembrane segments as well as some flexibility of movement perpendicular to the membrane.

Integration of b subunits of unequal lengths into F1F0-ATP synthase

In Escherichia coli the peripheral stalk of F1F0-ATP synthase consists of a parallel dimer of identical b subunits. However, the length of the two b subunits need not be fixed. This led us to ask whether it is possible for two b subunits of unequal length to dimerize in a functional enzyme complex. A two-plasmid expression system has been developed that directs production of b subunits of unequal lengths in the same cell. Two b subunits differing in length have been expressed with either a histidine or V5 epitope tag to facilitate nickel-affinity resin purification (Ni-resin) and Western blot analysis. The epitope tags did not materially affect enzyme function. The system allowed us to determine whether the different b subunits segregate to form homodimers or, conversely, whether a heterodimer consisting of both the shortened and lengthened b subunits can occur in an intact enzyme complex. Experiments expressing different b subunits lengthened and shortened by up to 7 amino acids were detected in the same enzyme complex. The V5-tagged b subunit shortened by 7 amino acids (b Delta 7-V5) was detected in Ni-resin-purified membrane preparations only when coexpressed with a histidine-tagged b subunit in the same cell. The results demonstrate that the enzyme complex can tolerate a size difference between the two b subunits of up to 14 amino acids. Moreover, the experiments demonstrated the feasibility of constructing enzyme complexes with non-identical b subunits that will be valuable for research requiring specific chemical modification of a single b subunit.

Subunit rotation of vacuolar-type proton pumping ATPase: relative rotation of the G and C subunits

Vacuolar-type ATPases V1V0 (V-ATPases) are found ubiquitously in the endomembrane organelles of eukaryotic cells. In this study, we genetically introduced a His tag and a biotin tag onto the c and G subunits, respectively, of Saccharomyces cerevisiae V-ATPase. Using this engineered enzyme, we observed directly the continuous counter-clockwise rotation of an actin filament attached to the G subunit when the enzyme was immobilized on a glass surface through the c subunit. V-ATPase generated essentially the same torque as the F-ATPase (ATP synthase). The rotation was inhibited by concanamycin and nitrate but not by azide. These results demonstrated that the V- and F-ATPase carry out a common rotational catalysis.

Proton translocation driven by ATP hydrolysis in V-ATPases

The vacuolar H(+)-ATPases (or V-ATPases) are a family of ATP-dependent proton pumps responsible for acidification of intracellular compartments and, in certain cases, proton transport across the plasma membrane of eukaryotic cells. They are multisubunit complexes composed of a peripheral domain (V(1)) responsible for ATP hydrolysis and an integral domain (V(0)) responsible for proton translocation. Based upon their structural similarity to the F(1)F(0) ATP synthases, the V-ATPases are thought to operate by a rotary mechanism in which ATP hydrolysis in V(1) drives rotation of a ring of proteolipid subunits in V(0). This review is focused on the current structural knowledge of the V-ATPases as it relates to the mechanism of ATP-driven proton translocation.

F1F0-ATP synthase. Binding of delta subunit to a 22-residue peptide mimicking the N-terminal region of alpha subunit

The stator in F(1)F(0)-ATP synthase resists strain generated by rotor torque. In Escherichia coli the b(2)delta subunit complex comprises the stator, bound to subunit a in F(0) and to alpha(3)beta(3) hexagon of F(1). Proteolysis and cross-linking had suggested that N-terminal residues of alpha subunit are involved in binding delta. Here we demonstrate that a synthetic peptide consisting of the first 22 residues of alpha ("alpha N1-22") binds specifically to isolated wild-type delta subunit with high affinity (K(d) = 130 nm), accounting for a major portion of the binding energy when delta-depleted F(1) and isolated delta bind together (K(d) = 1.4 nm). Stoichiometry of binding of alpha N1-22 to delta at saturation was 1/1, showing that in intact F(1)F(0)-ATP synthase only one of the three alpha subunits is involved in delta binding. When alpha N1-22 was incubated with delta subunits containing mutations in helices 1 or 5 on the F(1)-binding face of delta, peptide binding was impaired as was binding of delta-depleted F(1). Residues alpha 6-18 are predicted to be helical, and a potential helix capping box occurs at residues alpha 3-8. Circular dichroism measurements showed that alpha N1-22 had significant helical content. Hypothetically a helical region of residues alpha N1-22 packs with helices 1 and 5 on the F(1)-binding face of delta, forming the alpha/delta interface.

Mutational analysis of the non-homologous region of subunit A of the yeast V-ATPase

Subunit A is the catalytic nucleotide binding subunit of the vacuolar proton-translocating ATPase (or V-ATPase) and is homologous to subunit beta of the F(1)F(0) ATP synthase (or F-ATPase). Amino acid sequence alignment of these subunits reveals a 90-amino acid insert in subunit A (termed the non-homologous region) that is absent from subunit beta. To investigate the functional role of this region, site-directed mutagenesis has been performed on the VMA1 gene that encodes subunit A in yeast. Substitutions were performed on 13 amino acid residues within this region that are conserved in all available A subunit sequences. Most of the 18 mutations introduced showed normal assembly of the V-ATPase. Of these, one (R219K) greatly reduced both proton transport and ATPase activity. By contrast, the P217V mutant showed significantly reduced ATPase activity but higher than normal levels of proton transport, suggesting an increase in coupling efficiency. Two other mutations in the same region (P223V and P233V) showed decreased coupling efficiency, suggesting that changes in the non-homologous region can alter coupling of proton transport and ATP hydrolysis. It was previously shown that the V-ATPase must possess at least 5-10% activity relative to wild type to undergo in vivo dissociation in response to glucose withdrawal. However, four of the mutations studied (G150A, D157E, P177V, and P223V) were partially or completely blocked in dissociation despite having greater than 30% of wild type levels of activity. These results suggest that changes in the non-homologous region can also alter in vivo dissociation of the V-ATPase independent of effects on activity.

Identification of the F1-binding surface on the delta-subunit of ATP synthase

The stator function in ATP synthase was studied by a combined mutagenesis and fluorescence approach. Specifically, binding of delta-subunit to delta-depleted F(1) was studied. A plausible binding surface on delta-subunit was identified from conservation of amino acid sequence and the high resolution NMR structure. Specific mutations aimed at modulating binding were introduced onto this surface. Affinity of binding of wild-type and mutant delta-subunits to delta-depleted F(1) was determined quantitatively using the fluorescence signals of natural delta-Trp-28, inserted delta-Trp-11, or inserted delta-Trp-79. The results demonstrate that helices 1 and 5 in the N-terminal domain of the delta-subunit provide the F(1)-binding surface of delta. Unexpectedly, mutations that impaired binding between F(1) and delta were found to not necessarily impair ATP synthase activity. Further investigation revealed that inclusion of the soluble cytoplasmic domain of the b subunit substantially enhanced affinity of binding of delta-subunit to F(1). The new data show that the stator is "overengineered" to resist rotor torque during catalysis.

Activity and NMR structure of synthetic peptides of the bovine ATPase inhibitor protein, IF1

The protein IF(1) is a natural inhibitor of the mitochondrial F(o)F(1)-ATPase. Many investigators have been prompted to identify the shortest segment of IF(1), retaining its native activity, for use in biomedical applications. Here, the activity of the synthetic peptides IF(1)-(42-58) and IF(1)-(22-46) is correlated to their structure and conformational plasticity determined by CD and [1H]-NMR spectroscopy. Among all the IF(1) segments tested, IF(1)-(42-58) exerts the most potent, pH and temperature dependent activity on the F(o)F(1) complex. The results suggest that, due to its flexible structure, it can fold in helical and/or beta-spiral arrangements that favor the binding to the F(o)F(1) complex, where the native IF(1) binds. IF(1)-(22-46), instead, as it adopts a rigid alpha-helical conformation, it inhibits ATP hydrolysis only in the soluble F(1) moiety.

Rebuilt 3D structure of the chloroplast f1 ATPase-tentoxin complex

The F1 part of the chloroplast H+ adenosine triphosphate (ATP)-synthase (CF1) strongly interacts with tentoxin, a natural fungous cyclic tetrapeptide known to inhibit the chloroplast enzyme and not the mammalian mitochondrial enzyme. Whereas the synthesis or the hydrolysis of ATP requires the stepwise rotation of the protein rotor gamma within the (alphabeta)3 crown, only one molecule of tentoxin is needed to fully inhibit the complex. With the help of an original homology modeling technique, based on robust distance geometry protocols, we built a tridimensional model of the alpha3beta3gamma CF1) subcomplex (3200 esidues), in which we introduced three different nucleotide occupancies to check their possible influence on the tentoxin binding site. Simultaneous comparison of three available high-resolution X-ray structures of F1, performed with a local structural alignment search tool, led to characterizing common structural blocks and the distorsions experienced by the complex during the catalytic turnover. The common structural blocks were used as a starting point of the spinach CF1 structure rebuilding. Finally, tentoxin was docked into its putative binding site of the reconstructed structure. The docking method was initially validated in the mitochondrial enzyme by its ability to relocate nucleotides into their original position in the crystal. Tentoxin binding was found possible to the two alpha/beta interfaces associated with the empty and adenosine diphosphate (ADP)-loaded catalytic sites, but not to the one associated with the ATP-loaded site. These results suggest a mechanism of CF1 inhibition by one molecule of tentoxin, by the impossibility of the alpha/beta interface bearing tentoxin to pass through the ATP-loaded state.

Localization of subunits D, E, and G in the yeast V-ATPase complex using cysteine-mediated cross-linking to subunit B

Using a combination of cysteine mutagenesis and covalent cross-linking, we have identified subunits in close proximity to specific sites within subunit B of the vacuolar (H(+))-ATPase (V-ATPase) of yeast. Unique cysteine residues were introduced into subunit B by site-directed mutagenesis, and the resultant V-ATPase complexes were reacted with the bifunctional, photoactivatable maleimide reagent 4-(N-maleimido)benzophenone (MBP) followed by irradiation. Cross-linked products were identified by Western blot using subunit-specific antibodies. Introduction of cysteine residues at positions Glu(106) and Asp(199) led to cross-linking of subunits B and E, at positions Asp(341) and Ala(424) to cross-linking of subunits B and D, and at positions Ala(15) and Lys(45) to cross-linking of subunits B and G. Using a molecular model of subunit B constructed on the basis of sequence homology between the V- and F-ATPases, the X-ray coordinates of the F(1)-ATPase, and energy minimization, Glu(106), Asp(199), Ala(15), and Lys(45) are all predicted to be located on the outer surface of the complex, with Ala(15) and Lys(45) located near the top of the complex furthest from the membrane. By contrast, Asp(341) and Ala(424) are predicted to face the interior of the A(3)B(3) hexamer. These results suggest that subunits E and G form part of a peripheral stalk connecting the V(1) and V(0) domains whereas subunit D forms part of a central stalk. Subunit D is thus the most likely homologue to the gamma subunit of F(1), which undergoes rotation during ATP hydrolysis and serves an essential function in rotary catalysis.

The molecular mechanism of ATP synthesis by F1F0-ATP synthase: a scrutiny of the major possibilities

A critical goal of metabolism in living cells is the synthesis of adenosine triphosphate (ATP). ATP is synthesized by the enzyme F1F0-ATP synthase. This enzyme, the smallest-known molecular machine, couples proton translocation through its membrane-embedded, hydrophobic domain, F0, to the synthesis of ATP from adenosine diphosphate (ADP) and inorganic phosphate (Pi) in its soluble, hydrophilic headpiece, F1. Animals, plants and microorganisms all capture and utilize energy by this important chemical reaction. How does it occur? The binding change mechanism and the torsional mechanism of energy transduction and ATP synthesis are two mechanisms that have been proposed in the literature. According to the binding change mechanism (which considers reversible catalysis and site-site cooperativity), energy is required primarily for release of synthesized ATP, but not for its synthesis. On the other hand, according to the torsional mechanism (which considers an irreversible mode of catalysis and absence of cooperativity), all the elementary steps require energy, and the ion-protein interaction energy obtained from the ion gradients is used to synthesize ATP, for Pi binding, and for straining the beta-epsilon bond in order to enable ADP to bind. The energy to release preformed ATP from the tight catalytic site (betaDP) is provided by the formation of the beta-epsilon ester linkage. First, the central features of these mechanisms are clearly delineated. Then, a critical scrutiny of these mechanisms is undertaken. The predictions of the torsional mechanism are listed. In particular, how the torsional mechanism deals with the specific difficulties associated with other mechanisms, and how it seeks to explain a wealth of structural, spectroscopic, and biochemical data is discussed in detail. Recent experimental data in support of the mechanism are presented. Finally, in view of the molecular machine nature of energy transduction, the indispensability of applying engineering tools at the molecular level is highlighted. This paves the way for the development of a new field: Molecular Physiological Engineering.

Quantitative determination of binding affinity of delta-subunit in Escherichia coli F1-ATPase: effects of mutation, Mg2+, and pH on Kd

To study the stator function in ATP synthase, a fluorimetric assay has been devised for quantitative determination of binding affinity of delta-subunit to Escherichia coli F(1)-ATPase. The signal used is that of the natural tryptophan at residue delta28, which is enhanced by 50% upon binding of delta-subunit to alpha(3)beta(3)gammaepsilon complex. K(d) for delta binding is 1.4 nm, which is energetically equivalent (50.2 kJ/mol) to that required to resist the rotor strain. Only one site for delta binding was detected. The deltaW28L mutation increased K(d) to 4.6 nm, equivalent to a loss of 2.9 kJ/mol binding energy. While this was insufficient to cause detectable functional impairment, it did facilitate preparation of delta-depleted F(1). The alphaG29D mutation reduced K(d) to 26 nm, equivalent to a loss of 7.2 kJ/mol binding energy. This mutation did cause serious functional impairment, referable to interruption of binding of delta to F(1). Results with the two mutants illuminate how finely balanced is the stator resistance function. delta' fragment, consisting of residues delta1-134, bound with the same K(d) as intact delta, showing that, at least in absence of F(o) subunits, the C-terminal domain of delta contributes zero binding energy. Mg(2+) ions had a strong effect on increasing delta binding affinity, supporting the possibility of bridging metal ion involvement in stator function. High pH environment greatly reduced delta binding affinity, suggesting the involvement of protonatable side-chains in the binding site.

Cross-talk in the A1-ATPase from Methanosarcina mazei Go1 due to nucleotide binding

Changes in the A(3)B(3)CDF-complex of the Methanosarcina mazei Gö1 A(1)-ATPase in response to ligand binding have been studied by small-angle x-ray scattering, protease digestion, fluorescence spectroscopy, matrix-assisted laser desorption ionization time-of-flight mass spectrometry, and CuCl(2)-induced disulfide formation. The value of the radius of gyration, R(g), increases slightly when MgATP, MgADP, or MgADP + P(i) (but not MgAMP-PNP) is present. The nucleotide-binding subunits A and B were reacted with N-4[4-[7-(dimethylamino)-4-methyl]coumarin-3-yl]maleimide, and spectral shifts and changes in fluorescence intensity were detected upon addition of MgAMP-PNP, MgATP, MgADP + P(i), or MgADP. Trypsin treatment of A(1) resulted in cleavage of the stalk subunits C and F, which was rapid in the presence of MgAMP-PNP but slow when MgATP or MgADP were added to the enzyme. When A(1) was supplemented with CuCl(2) a clear nucleotide dependence of an A-A-D cross-linking product was generated in the presence of MgADP and MgATP but not when MgAMP-PNP or MgADP + P(i) was added. The site of cross-link formation was located in the region of the N and C termini of subunit D. The data suggest that the stalk subunits C, D, and F in A(1) undergo conformational changes during ATP hydrolysis.

Reconstitution of Fo of the sodium ion translocating ATP synthase of Propionigenium modestum from its heterologously expressed and purified subunits

The atpB and atpF genes of Propionigenium modestum were cloned as His-tag fusion constructs and expressed in Escherichia coli. Both recombinant subunits a and b were purified via Ni(2+) chelate affinity chromatography. A functionally active Fo complex was reassembled in vitro from subunits a, b and c, and incorporated into liposomes. The F(o) liposomes catalysed (22)Na(+) uptake in response to an inside negative potassium diffusion potential, and the uptake was prevented by modification of the c subunits with N,N'-dicyclohexylcarbodiimide (DCCD). In the absence of a membrane potential the Fo complexes catalysed (22)Na(+)(out)/Na(+)(in)-exchange. After F(1) addition the F(1)F(o) complex was formed and the holoenzyme catalysed ATP synthesis, ATP dependent Na(+) pumping, and ATP hydrolysis, which was inhibited by DCCD. Functional F(o) hybrids were reconstituted with recombinant subunits a and b from P. modestum and c(11) from Ilyobacter tartaricus. These Fo hybrids had Na(+) translocation activities that were not distinguishable from that of P. modestum F(o).

NMR investigations of subunit c of the ATP synthase from Propionigenium modestum in chloroform/methanol/water (4 : 4 : 1)

The subunit c from the ATP synthase of Propionigenium modestum was studied by NMR in chloroform/methanol/water (4 : 4 : 1). In this solvent, subunit c consists of two helical segments, comprised of residues L5 to I26 and G29 to N82, respectively. On comparing the secondary structure of subunit c from P. modestum in the organic solvent mixture with that in dodecylsulfate micelles several deviations became apparent: in the organic solvent, the interruption of the alpha helical structure within the conserved GXGXGXGX motif was shortened from five to two residues, the prominent interruption of the alpha helical structure in the cystoplasmic loop region was not apparent, and neither was there a break in the alpha helix after the sodium ion-binding Glu65 residue. The folding of subunit c of P. modestum in the organic solvent also deviated from that of Escherichia coli in the same environment, the most important difference being that subunit c of P. modestum did not adopt a stable hairpin structure like subunit c of E. coli.

Mechanism of the F(1)F(0)-type ATP synthase, a biological rotary motor

The F(1)F(0)-type ATP synthase is a key enzyme in cellular energy interconversion. During ATP synthesis, this large protein complex uses a proton gradient and the associated membrane potential to synthesize ATP. It can also reverse and hydrolyze ATP to generate a proton gradient. The structure of this enzyme in different functional forms is now being rapidly elucidated. The emerging consensus is that the enzyme is constructed as two rotary motors, one in the F(1) part that links catalytic site events with movements of an internal rotor, and the other in the F(0) part, linking proton translocation to movements of this F(0) rotor. Although both motors can work separately, they must be connected together to interconvert energy. Evidence for the function of the rotary motor, from structural, genetic and biophysical studies, is reviewed here, and some uncertainties and remaining mysteries of the enzyme mechanism are also discussed.

The molecular mechanism of ATP synthesis by F1F0-ATP synthase

ATP synthesis by oxidative phosphorylation and photophosphorylation, catalyzed by F1F0-ATP synthase, is the fundamental means of cell energy production. Earlier mutagenesis studies had gone some way to describing the mechanism. More recently, several X-ray structures at atomic resolution have pictured the catalytic sites, and real-time video recordings of subunit rotation have left no doubt of the nature of energy coupling between the transmembrane proton gradient and the catalytic sites in this extraordinary molecular motor. Nonetheless, the molecular events that are required to accomplish the chemical synthesis of ATP remain undefined. In this review we summarize current state of knowledge and present a hypothesis for the molecular mechanism of ATP synthesis.

Cysteine-directed cross-linking to subunit B suggests that subunit E forms part of the peripheral stalk of the vacuolar H+-ATPase

We have employed a combination of site-directed mutagenesis and covalent cross-linking to identify subunits in close proximity to subunit B in the vacuolar H(+)-ATPase (V-ATPase) complex. Unique cysteine residues were introduced into a Cys-less form of subunit B, and the V-ATPase complex in isolated vacuolar membranes from each mutant strain was reacted with the bifunctional, photoactivable maleimide reagent 4-(N-maleimido)benzophenone. Photoactivation resulted in cross-linking of the unique sulfhydryl groups on subunit B with other subunits in the complex. Four of the eight mutants constructed containing a unique cysteine residue at Ala(15), Lys(45), Glu(494), or Thr(501) resulted in the formation of cross-linked products, which were recognized by Western blot analysis using antibodies against both subunits B and E. These products had a molecular mass of 84 kDa, consistent with a cross-linked product of subunits B and E. Molecular modeling of subunit B places Ala(15) and Lys(45) near the top of the V(1) structure (i.e. farthest from the membrane), whereas Glu(494) and Thr(501) are predicted to reside near the bottom of V(1), with all four residues predicted to be oriented toward the external surface of the complex. A model incorporating these and previous data is presented in which subunit E exists in an extended conformation on the outer surface of the A(3)B(3) hexamer that forms the core of the V(1) domain. This location for subunit E suggests that this subunit forms part of the peripheral stalk of the V-ATPase that links the V(1) and V(0) domains.

Second stalk of ATP synthase. Cross-linking of gamma subunit in F1 to truncated Fob subunit prevents ATP hydrolysis

ATP synthase consists of two portions, F(1) and F(o), connected by two stalks: a central rotor stalk containing gamma and epsilon subunits and a peripheral, second stalk formed by delta and two copies of F(o)b subunits. The second stalk is expected to keep the stator subunits from spinning along with the rotor. We isolated a TF(1)-b'(2) complex (alpha(3)beta(3)gammadeltaepsilonb'(2)) of a thermophilic Bacillus PS3, in which b' was a truncated cytoplasmic fragment of F(o)b subunit, and introduced a cysteine at its N terminus (bc'). Association of b'(2) or bc'(2) with TF(1) did not have significant effect on ATPase activity. A disulfide bond between the introduced cysteine of bc' and cysteine 109 of gamma subunit was readily formed, and this cross-link caused inactivation of ATPase. This implies that F(o)b subunit bound to stator subunits of F(1) with enough strength to resist rotation of gamma subunit and to prevent catalysis. Contrary to this apparent tight binding, some detergents such as lauryldodecylamine oxide tend to cause release of b'(2) from TF(1).

The rotary mechanism of ATP synthase

Since the chemiosmotic theory was proposed by Peter Mitchell in the 1960s, a major objective has been to elucidate the mechanism of coupling of the transmembrane proton motive force, created by respiration or photosynthesis, to the synthesis of ATP from ADP and inorganic phosphate. Recently, significant progress has been made towards establishing the complete structure of ATP synthase and revealing its mechanism. The X-ray structure of the F(1) catalytic domain has been completed and an electron density map of the F(1)-c(10) subcomplex has provided a glimpse of the motor in the membrane domain. Direct microscopic observation of rotation has been extended to F(1)-ATPase and F(1)F(o)-ATPase complexes.