Structure of nitrite bound to copper-containing nitrite reductase from Alcaligenes faecalis. Mechanistic implications

Reactivity of copper(I) complexes supported by tripodal nitrogen-containing tetradentate ligands toward gaseous diatomic molecules, NO, CO and O2

Series of Cu(I) complexes supported by nitrogen-based tetradentate ligands were examined for their reactivity toward nitric oxide (NO). The copper complexes generated the corresponding Cu(II)-nitrite complexes in the presence of an excess molar amount of NO. A higher reactivity of the Cu(I) complexes toward NO was observed with a more negative Cu(I/II) redox potential, same as their reactivity toward O2 and CO, while [CuI(tepa)]+ with the most positive oxidation potential only reacted with NO among the diatomic gaseous molecules (NO, O2, and CO) examined in this study. DFT studies explained that the reactivity of the Cu-NO complex was the key to its selectivity rather than its coordination bond stability.

A terpyridine-based copper complex for electrochemical reduction of nitrite to nitric oxide

In biological systems, nitrite reductase enzymes (NIRs) are responsible for reduction of nitrite (NO2-) to nitric oxide (NO). These NIRs have mostly Cu- or Fe-containing active sites, surrounded by amine-containing ligands. Therefore, mononuclear Cu complexes with N-donor ligands are highly relevant in the development of NIR model systems and in the mechanistic investigation of the nitrite reduction reaction. Herein, we report on a terpyridine-based CuII complex with square planar geometry for H+-assisted electrochemical reduction of NO2-. Through electrochemical measurements, spectroscopic characterization and isotope-labelling experiments we propose a mechanistic reaction pathway involving an unstable HNO2 state. The CuI intermediate, formed electrochemically, was isolated and its molecular structure was deduced, showing linkage isomerism of the nitrite ligand. Moreover, qualitative and quantitative product analysis by GC-MS shows N2O formed as a side product along with the main product NO. Furthermore, by obtaining single crystals and conducting structural analysis we were able to determine the structural arrangement and redox state of the complex after electrochemical treatment.

Tuning the Reactivity of Copper(II)-Nitrite Core Towards Nitric Oxide Generation

Insights into the molecular mechanism and factors affecting nitrite-to-NO transformation at transition metal sites are essential for developing sustainable technologies relevant to NO-based therapeutics, waste water treatment, and agriculture. A set of copper(II)-nitrite complexes 1-4 have been isolated employing tridentate pincer-type ligands (quL, pyL, ClArOL-, PhOL-) featuring systematically varied donors. Although the X-ray crystal structures of the copper(II)-nitrite cores in 1-4 are comparable, electrochemical studies on complexes 1-4 reveal that redox properties of these complexes differ due to the changes in the σ-donor abilities of the phenolate/N-heterocycle based donor sites. Reactivity of these nitrite complexes with oxygen-atom-transfer (OAT) reagent (e. g. triphenyl phosphine Ph3P) and H+/e- donor reagent (e. g. substituted phenols ArOH) show the reduction of nitrite to NO gas. Detailed kinetic investigations including kinetic isotope effect (KIE), Eyring analyses for determining the activation parameters unfold that reduction of nitrite at copper(II) by Ph3P or ArOH are influenced by the CuII/CuI redox potential. Finally, this study allows mechanism driven development of catalytic nitrite reduction by ArOH in the presence of 10 mol % copper complex (1).

Mechanistic insights into nitric oxide generation from nitrite via O-atom transfer in the unsymmetrical β-diketiminato copper(II) nitrite complex

In this study, we employed DFT calculations to elucidate the mechanism of NO generation from nitrite via PPh3-induced oxygen atom transfer (OAT) in the unsymmetrical β-diketiminato copper(II), LCuIIONO. We discovered that the OAT process involves the cooperation of two PPh3 ligands and follows the mechanism distinct from that of the symmetrical β-diketiminato analogue. The ΔG‡ value, calculated to be 34.8 kcal mol-1, closely matches experimental data. The finding is further supported by analyzing the OAT product yields with varying equivalents of PPh3. The penta-coordinated species 5a, with PPh3 occupying the axial site, forms in the final stage of the OAT process. The isomerization of 5a and the decoordination of the hemilabile pyridyl arm synergistically reduce Cu(II) to Cu(I), facilitating NO release from the Cu(I) centre. These computational results provide valuable insights for the ligand design for PPh3-induced OAT reactions to produce NO in Cu(II) nitrite systems.

Discussing the Terms Biomimetic and Bioinspired within Bioinorganic Chemistry

The terms biomimetic and bioinspired are very relevant in the field of bioinorganic chemistry and have been widely applied. Although they were defined by the International Organization for Standardization in 2015, these terms have at times been used rather ambiguously in the literature. This may be due to the inherent complexity of bioinorganic systems where, for example, a structural model of an enzyme active site may not replicate its function. Conversely, the function of an enzyme may be reproduced in a system where the structure does not resemble the enzyme's active site. To address this, we suggest definitions for the terms biomimetic and bioinspired wherein structure and function have been decoupled. With the help of some representative case studies we have outlined the challenges that may arise and make suggestions on how to apply terminology with careful intention.

Acid-catalyzed Transformation of Nitrite to Nitric Oxide on Copper(II)-Cobalt(II) Centers in a Bimetallic Complex

Nitrite (NO2 -) serves as a pool of nitric oxide (NO) in biological systems under hypoxic conditions, and it is transformed to NO by nitrite reductase (NiR) enzyme in the presence of acid (H+ ions). However, NO synthases (NOSs) generate NO via L-arginine oxidation in normoxic conditions. Previously, acid-induced NO2 - reduction chemistry was modeled on mono-metallic 3d-metals, generating metal-nitrosyls or NO(g) with H2O or H2O2 products. Herein, to understand the relative potency of a bimetallic system, we report the acid-induced reductive conversion of η2-bound NO2 - to NO on CuII-CoII centers of a hetero-bimetallic CuII-nitrito-CoII complex, [(LN8H)CuII-NO2 --CoII]3+ (CuII-NO2 --CoII, 2) bearing an octadentate N8-cryptand ligand (LN8H). The CuII-NO2 --CoII generates [CuII(LN8H)CoII]4+ (1) upon reaction with one equiv. acid (HClO4, H+ ions source) with NO(g) via a presumed transient nitrousacid (ONOH) intermediate species. Likewise, this NO2 - reduction was found to form H2O, which is believed to be from the decomposition of H2O2, an intermediate species. In addition, complex 2, in the presence of more than one equiv. H+ ions also showed the formation of NO(g) with H2O. Mechanistic investigations, using 15N-labeled-15NO2 -, 18O-labeled-18O14N16O- and 2H-labeled-DClO4 (D+ source), revealed that the N-atom and O-atom in the 14/15NO and 14N18O gases are derived from NO2 - ligand and H-atom in H2O derived from H+-source, respectively.

Unignorable enzyme-specific isotope fractionation for nitrate source identification in aquatic ecosystem

Nitrate contamination in aquatic systems is a widespread problem across the world. The isotopic composition (δ15N, δ18O) of nitrate and their isotope effect (15ε, 18ε) can facilitate the identification of the source and transformation of nitrate. Although previous researches claimed the isotope fractionations may change the original δ15N/δ18O values and further bias identification of nitrate sources, isotope effect was often ignored due to its complexity. To fill the gap between the understanding and application, it is crucial to develop a deep understanding of isotopic fractionation based on available evidence. In this regard, this study summarized the available methods to determine isotope effects, thereby systematically comparing the magnitude of isotope effects (15ε and 18ε) in nitrification, denitrification and anammox. We found that the enzymatic reaction plays the key role in isotope fractionations, which is significantly affected by the difference in the affinity, substrate channel properties and redox potential of active site. Due to the overlapping of microbial processes and accumulation of uncertainties, the significant isotope effects at small scales inevitably decrease in large-scale ecosystems. However, the proportionality of N and O isotope fractionation (δ18O/δ15N; 18ε/15ε) associated with nitrate reduction generally follows enzyme-specific proportionalities (i.e., Nar, 0.95; Nap, 0.57; eukNR, 0.98) in aquatic ecosystems, providing enzyme-specific constant factors for the identification of nitrate transformation. With these results, this study finally discussed feasible source portioning methods when considering the isotope effect and aimed to improve the accuracy in nitrate source identification.

A molecular dynamics and quantum mechanical investigation of intermolecular interaction and electron-transfer mechanism between copper-containing nitrite reductase and redox partner pseudoazurin

Much of biological electron transfer occurs between proteins. These molecular processes usually involve molecular recognition and intermolecular electron transfer (inter-ET). The inter-ET reaction between copper-containing nitrite reductase (CuNiR) and partner protein pseudoazurin (PAz) is the first step in denitrification, which is affected by intermolecular association. However, the transient interaction between CuNiR and PAz and the indistinct inter-ET pathway pose challenges for people to understand the biological functions of the CuNiR-PAz complex. Thus, molecular dynamics simulation and quantum mechanical calculation were used to investigate the question in this study. The interaction of the interface residues was determined through hydrogen bonds, root-mean-square deviation, root-mean-square fluctuation, the dynamics cross-correlation matrix, and molecular mechanics Poisson-Boltzmann surface area of molecular dynamics simulations. The interactions among the residues Glu89, Gly200, Asp205, Asn91, Glu204, Thr92, and Met141 on CuNiR and the residues Lys109, Ala15, Lys10, Asn9, Ile110, Met84, and Met16 on PAz are responsible for the stabilization of the complex. The binding free energy is up to -25.33 kcal mol^-1. We compared the wild-type and mutant (M84A) interfacial optimized complex models at the CAM-B3LYP level with Grimme dispersion corrections (GD3) to confirm Met84 as a relay station for promoting the inter-ET. Additionally, to test whether Met84 may combine with the adjacent Met141 to form a special two-center, three-electron (S∴S)⁺ structure to promote the inter-ET, QM/MM was further performed to discuss the possibility of generating an electron stepping stone. Our study will promote a deep understanding of the stable protein-protein interaction, and the identified inter-residue interaction will be theoretical guidance for enhancing the catalytic activity of CuNiR in denitrification.

Acid-induced nitrite reduction of nonheme iron(ii)-nitrite: mimicking biological Fe-NiR reactions

Nitrite reductase (NiR) catalyzes nitrite (NO₂ ^-) to nitric oxide (NO) transformation in the presence of an acid (H⁺ ions/pH) and serves as a critical step in NO biosynthesis. In addition to the NiR enzyme, NO synthases (NOSs) participate in NO production. The chemistry involved in the catalytic reduction of NO₂ ^-, in the presence of H⁺, generates NO with a H₂O molecule utilizing two H⁺ + one electron from cytochromes and is believed to be affected by the pH. Here, to understand the effect of H⁺ ions on NO₂ ^- reduction, we report the acid-induced NO₂ ^- reduction chemistry of a nonheme Fe^II-nitrito complex, [(12TMC)Fe^II(NO₂ ^-)]⁺ (Fe^II-NO₂ ^-, 2), with variable amounts of H⁺. Fe^II-NO₂ ^- upon reaction with one-equiv. of acid (H⁺) generates [(12TMC)Fe(NO)]²⁺, {FeNO}⁷ (3) with H₂O₂ rather than H₂O. However, the amount of H₂O₂ decreases with increasing equivalents of H⁺ and entirely disappears when H⁺ reaches ≅ two-equiv. and shows H₂O formation. Furthermore, we have spectroscopically characterized and followed the formation of H₂O₂ (H⁺ = one-equiv.) and H₂O (H⁺ ≅ two-equiv.) and explained why bio-driven NiR reactions end with NO and H₂O. Mechanistic investigations, using ¹⁵N-labeled-¹⁵NO₂ ^- and ²H-labeled-CF₃SO₃D (D⁺ source), revealed that the N atom in the {Fe^14/15NO}⁷ is derived from the NO₂ ^- ligand and the H atom in H₂O or H₂O₂ is derived from the H⁺ source, respectively.

An investigation on catalytic nitrite reduction reaction by bioinspired CuII complexes

Catalytic nitrite reductions by Cu^II complexes containing anionic ^Me2Tp, neutral ^Me2Tpm, or neutral ^iPrTIC ligands in the presence of L-ascorbic acid, which served as an electron donor and proton source, were investigated. The results showed that auxiliary ligands are important for copper-mediated catalytic nitrite reduction. Furthermore, the electronic effects of the ligand govern the nitrite reduction efficiency, which should be considered at two control points: one is the susceptibility of the LCu^I-nitrite species to protonation and the other is the susceptibility of LCu^II to reduction giving LCu^I. In addition, an external strong acid leads to the production of nitrous acid, which may suggest that the reactivity of nitrous acid toward the LCu^I species is a third control point.

Current status of neutron crystallography in structural biology

Hydrogen atoms and hydration water molecules in proteins are essential for many biochemical processes, especially enzyme catalysis. Neutron crystallography enables direct observation of hydrogen atoms, and reveals molecular recognition through hydrogen bonding and catalytic reactions involving proton-coupled electron transfer. The use of neutron crystallography is still limited for proteins, but its popularity is increasing owing to an increase in the number of diffractometers for structural biology at neutron facilities and advances in sample preparation. According to the characteristics of the neutrons, monochromatic or quasi-Laue methods and the time-of-flight method are used in nuclear reactors and pulsed spallation sources, respectively, to collect diffraction data. Growing large crystals is an inevitable problem in neutron crystallography for structural biology, but sample deuteration, especially protein perdeuteration, is effective in reducing background levels, which shortens data collection time and decreases the crystal size required. This review also introduces our recent neutron structure analyses of copper amine oxidase and copper-containing nitrite reductase. The neutron structure of copper amine oxidase gives detailed information on the protonation state of dissociable groups, such as the quinone cofactor, which are critical for catalytic reactions. Electron transfer via a hydrogen-bond jump and a hydroxide ion ligation in copper-containing nitrite reductase are clarified, and these observations are consistent with the results from the quantum chemical calculations. This review article is an extended version of the Japanese article, Elucidation of Enzymatic Reaction Mechanism by Neutron Crystallography, published in SEIBUTSU-BUTSURI Vol. 61, p.216–222 (2021).

Metalloprotein catalysis: structural and mechanistic insights into oxidoreductases from neutron protein crystallography

Metalloproteins catalyze a range of reactions, with enhanced chemical functionality due to their metal cofactor. The reaction mechanisms of metalloproteins have been experimentally characterized by spectroscopy, macromolecular crystallography and cryo-electron microscopy. An important caveat in structural studies of metalloproteins remains the artefacts that can be introduced by radiation damage. Photoreduction, radiolysis and ionization deriving from the electromagnetic beam used to probe the structure complicate structural and mechanistic interpretation. Neutron protein diffraction remains the only structural probe that leaves protein samples devoid of radiation damage, even when data are collected at room temperature. Additionally, neutron protein crystallography provides information on the positions of light atoms such as hydrogen and deuterium, allowing the characterization of protonation states and hydrogen-bonding networks. Neutron protein crystallography has further been used in conjunction with experimental and computational techniques to gain insight into the structures and reaction mechanisms of several transition-state metal oxidoreductases with iron, copper and manganese cofactors. Here, the contribution of neutron protein crystallography towards elucidating the reaction mechanism of metalloproteins is reviewed.

Copper nitrite reductase from Sinorhizobium meliloti 2011: Crystal structure and interaction with the physiological versus a nonmetabolically related cupredoxin-like mediator

We report the crystal structure of the copper-containing nitrite reductase (NirK) from the Gram-negative bacterium Sinorhizobium meliloti 2011 (Sm), together with complex structural alignment and docking studies with both non-cognate and the physiologically related pseudoazurins, SmPaz1 and SmPaz2, respectively. S. meliloti is a rhizobacterium used for the formulation of Medicago sativa bionoculants, and SmNirK plays a key role in this symbiosis through the denitrification pathway. The structure of SmNirK, solved at a resolution of 2.5 Å, showed a striking resemblance with the overall structure of the well-known Class I NirKs composed of two Greek key β-barrel domains. The activity of SmNirK is ~12% of the activity reported for classical NirKs, which could be attributed to several factors such as subtle structural differences in the secondary proton channel, solvent accessibility of the substrate channel, and that the denitrifying activity has to be finely regulated within the endosymbiont. In vitro kinetics performed in homogenous and heterogeneous media showed that both SmPaz1 and SmPaz2, which are coded in different regions of the genome, donate electrons to SmNirK with similar performance. Even though the energetics of the interprotein electron transfer (ET) process is not favorable with either electron donors, adduct formation mediated by conserved residues allows minimizing the distance between the copper centers involved in the interprotein ET process.

2.85 and 2.99 Å resolution structures of 110 kDa nitrite reductase determined by 200 kV cryogenic electron microscopy

Cu-containing nitrite reductases (NiRs) are 110 kDa enzymes that play central roles in denitrification. Although the NiRs have been well studied, with over 100 Protein Data Bank entries, such issues as crystal packing, photoreduction, and lack of high pH cases have impeded structural analysis of their catalytic mechanisms. Here we show the cryogenic electron microscopy (cryo-EM) structures of Achromobacter cycloclastes NiR (AcNiR) at pH 6.2 and 8.1. The optimization of 3D-reconstruction parameters achieved 2.99 and 2.85 Å resolution. Comprehensive comparisons with cryo-EM and 56 AcNiR crystal structures suggested crystallographic artifacts in residues 185-215 and His255' due to packing and photoreduction, respectively. We used a newly developed map comparison method to detect structural change around the type 2 Cu site. While the theoretical estimation of coordinate errors of cryo-EM structures remains difficult, combined analysis using X-ray and cryo-EM structures will allow deeper insight into the local structural changes of proteins.

Neutron crystallography for the elucidation of enzyme catalysis

Hydrogen atoms and hydration water molecules in proteins are indispensable for many biochemical processes, especially enzymatic catalysis. The locations of hydrogen atoms in proteins are usually predicted based on X-ray structures, but it is still very difficult to know the ionization states of the catalytic residues, the hydration structure of the protein, and the characteristics of hydrogen-bonding interactions. Neutron crystallography allows the direct observation of hydrogen atoms that play crucial roles in molecular recognition and the catalytic reactions of enzymes. In this review, we present the current status of neutron crystallography in structural biology and recent neutron structural analyses of three enzymes: ascorbate peroxidase, the main protease of severe acute respiratory syndrome coronavirus 2, and copper-containing nitrite reductase.

Remote Water-Mediated Proton Transfer Triggers Inter-Cu Electron Transfer: Nitrite Reduction Activation in Copper-Containing Nitrite Reductase

The copper-containing nitrite reductase (CuNiR) catalyzes the biological conversion of nitrite to nitric oxide; key long-range electron/proton transfers are involved in the catalysis. However, the details of the electron-/proton-transfer mechanism are still unknown. In particular, the driving force of the electron transfer from the type-1 copper (T1Cu) site to the type-2 copper (T2Cu) site is ambiguous. Here, we explored the two possible proton-transfer channels, the high-pH proton channel and the primary proton channel, by using two-layered ONIOM calculations. Our calculation results reveal that the driving force for electron transfer from T1Cu to T2Cu comes from a remote water-mediated triple-proton-coupled electron-transfer mechanism. In the high-pH proton channel, the water-mediated triple-proton transfer occurs from Glu113 to an intermediate water molecule, whereas in the primary channel, the transfer is from Lys128 to His260. Subsequently, the two channels employ another two or three distinct proton-transfer steps to deliver the proton to the nitrite substrate at the T2Cu site. These findings explain the detailed proton-/electron-transfer mechanisms of copper-containing nitrite reductase and could extend our understanding of the diverse proton-coupled electron-transfer mechanisms in complicated proteins.

Geochemical and isotopic study of abiotic nitrite reduction coupled to biologically produced Fe(II) oxidation in marine environments

Estuarine sediments are often characterized by abundant iron oxides, organic matter, and anthropogenic nitrogen compounds (e.g., nitrate and nitrite). Anoxic dissimilatory iron reducing bacteria (e.g., Shewanella loihica) are ubiquitous in these environments where they can catalyze the reduction of Fe(III) (oxyhydr)oxides, thereby releasing aqueous Fe(II). The biologically produced Fe(II) can later reduce nitrite to form nitrous oxide. The effect on nitrite reduction by both biologically produced and artificially amended Fe(II) was examined experimentally. Ferrihydrite was reduced by Shewanella loihica in a batch reaction with an anoxic synthetic sea water medium. Some of the Fe(II) released by S. loihica adsorbed onto ferrihydrite, which was involved in the transformation of ferrihydrite to magnetite. In a second set of experiments with identical medium, no microorganism was present, instead, Fe(II) was amended. The amount of solid-bound Fe(II) in the experiments with bioproduced Fe(II) increased the rate of abiotic NO₂^- reduction with respect to that with synthetic Fe(II), yielding half-lives of 0.07 and 0.47 d, respectively. The δ¹⁸O and δ¹⁵N of NO₂^- was measured through time for both the abiotic and innoculated experiments. The ratio of ε¹⁸O/ε¹⁵N was 0.6 for the abiotic experiments and 3.1 when NO₂^- was reduced by S. loihica, thus indicating two different mechanisms for the NO₂^- reduction. Notably, there is a wide range of the ε¹⁸O/ε¹⁵N values in the literature for abiotic and biotic NO₂^- reduction, as such, the use of this ratio to distinguish between reduction mechanisms in natural systems should be taken with caution. Therefore, we suggest an additional constraint to identify the mechanisms (i.e. abiotic/biotic) controlling NO₂^- reduction in natural settings through the correlation of δ¹⁵N-NO₂^- and the aqueous Fe(II) concentration.

Multicopper oxidase (MCO) laccase from Stropharia sp. ITCC-8422: an apparent authentication using integrated experimental and in silico analysis

In the present study, specificity of laccase from Stropharia sp. ITCC-8422 against various substrates, i.e. 2,2-azino-bis (3-ethylbenzothiazoline-6-sulfonic acid) (ABTS), 2,6-dimethoxyphenol (DMP), guaiacol (GCL) and syringaldazine (SYZ) was determined. It exhibited maximum affinity against ABTS, followed by DMP and negligible activity for GCL and SYZ. As the concentration of substrate increased from 0.5 to 1.5 mM (ABTS) and 1 to 5 mM (DMP), the activity increased from 301.1 to 567.8 U/L and 254.4 to 436.2 U/L. Further, quadrupole time-of-flight liquid chromatography mass spectrometry (QTOF-LCMS) analysis of the extracellular proteome of Stropharia sp. ITCC-8422 identified eighty-four (84) extracellular proteins. The peptide sequence for the enzyme of interest exhibited sequence similarity with laccase-5 of Trametes pubescens. Using high molecular mass sequence of laccase-5, the protein structure of laccase was modelled and binding energy of laccase with four substrates, i.e. ABTS (- 5.65), DMP (- 4.65), GCL (- 4.66) and SYZ (- 5.5) was determined using autodock tool. The experimental and in silico analyses revealed maximum activity of laccase and lowest binding energy with ABTS. Besides, laccase was purified and it exhibited 2.1-fold purification with purification yield of 20.4% and had stability of 70% at pH 5-9 and 30-40 ℃. In addition, the bioremediation potential of laccase was explored by in silico analysis, where the binding energy of laccase with alizarin cyanine green was - 6.37 and both in silico work and experimental work were in agreement.

Catalysis and Electron Transfer in De Novo Designed Helical Scaffolds

The relationship between protein structure and function is one of the greatest puzzles within biochemistry. De novo metalloprotein design is a way to wipe the board clean and determine what is required to build in function from the ground up in an unrelated structure. This Review focuses on protein design efforts to create de novo metalloproteins within alpha-helical scaffolds. Examples of successful designs include those with carbonic anhydrase or nitrite reductase activity by incorporating a ZnHis3 or CuHis3 site, or that recapitulate the spectroscopic properties of unique electron-transfer sites in cupredoxins (CuHis2 Cys) or rubredoxins (FeCys4 ). This work showcases the versatility of alpha helices as scaffolds for metalloprotein design and the progress that is possible through careful rational design. Our studies cover the invariance of carbonic anhydrase activity with different site positions and scaffolds, refinement of our cupredoxin models, and enhancement of nitrite reductase activity up to 1000-fold.

Heteromeric three-stranded coiled coils designed using a Pb(II)(Cys)3 template mediated strategy

Three-stranded coiled coils are peptide structures constructed from amphipathic heptad repeats. Here we show that it is possible to form pure heterotrimeric three-stranded coiled coils by combining three distinct characteristics: (1) a cysteine sulfur layer for metal coordination, (2) a thiophilic, trigonal pyramidal metalloid (Pb(II)) that binds to these sulfurs and (3) an adjacent layer of reduced steric bulk generating a cavity where water can hydrogen bond to the cysteine sulfur atoms. Cysteine substitution in an a site yields Pb(II)A₂B heterotrimers, while d sites provide pure Pb(II)C₂D or Pb(II)CD₂ scaffolds. Altering the metal from Pb(II) to Hg(II) or shifting the relative position of the sterically less demanding layer removes heterotrimer specificity. Because only two of the eight or ten hydrophobic layers are perturbed, catalytic sites can be introduced at other regions of the scaffold. A Zn(II)(histidine)₃(H₂O) centre can be incorporated at a remote location without perturbing the heterotrimer selectivity, suggesting a unique strategy to prepare dissymmetric catalytic sites within self-assembling de novo-designed proteins.

High-resolution neutron crystallography visualizes an OH-bound resting state of a copper-containing nitrite reductase

X-ray crystallography often fails to determine the positions of hydrogen atoms, which play crucial roles in enzymatic reactions. Despite many X-ray crystallographic studies, the reaction mechanism of copper-containing nitrite reductases (CuNIRs), which reduce nitrite using two protons, has been controversial. The high-resolution neutron structure of a CuNIR reveals the protonation states of catalytic residues and key water molecules, thus providing insights into the catalytic mechanism. The catalytic Cu is shown to be coordinated by a hydroxide ion and not water. Furthermore, the hydrogen-deuterium exchange ratio suggests that intramolecular electron transfer is involved in a hydrogen-bond jump. These observations are consistent with previous computational chemistry; therefore, our study forms a bridge between the structural biology and quantum chemistry of CuNIRs.

Copper-containing nitrite reductases (CuNIRs) transform nitrite to gaseous nitric oxide, which is a key process in the global nitrogen cycle. The catalytic mechanism has been extensively studied to ultimately achieve rational control of this important geobiochemical reaction. However, accumulated structural biology data show discrepancies with spectroscopic and computational studies; hence, the reaction mechanism is still controversial. In particular, the details of the proton transfer involved in it are largely unknown. This situation arises from the failure of determining positions of hydrogen atoms and protons, which play essential roles at the catalytic site of CuNIRs, even with atomic resolution X-ray crystallography. Here, we determined the 1.50 Å resolution neutron structure of a CuNIR from Geobacillus thermodenitrificans (trimer molecular mass of ∼106 kDa) in its resting state at low pH. Our neutron structure reveals the protonation states of catalytic residues (deprotonated aspartate and protonated histidine), thus providing insights into the catalytic mechanism. We found that a hydroxide ion can exist as a ligand to the catalytic Cu atom in the resting state even at a low pH. This OH-bound Cu site is unexpected from previously given X-ray structures but consistent with a reaction intermediate suggested by computational chemistry. Furthermore, the hydrogen-deuterium exchange ratio in our neutron structure suggests that the intramolecular electron transfer pathway has a hydrogen-bond jump, which is proposed by quantum chemistry. Our study can seamlessly link the structural biology to the computational chemistry of CuNIRs, boosting our understanding of the enzymes at the atomic and electronic levels.

QM/MM MD simulations reveal an asynchronous PCET mechanism for nitrite reduction by copper nitrite reductase

The nitrite reduction in copper nitrite reductase is found to proceed through an asynchronous proton-coupled electron transfer (PCET) mechanism, with electron transfer from T1-Cu to T2-Cu preceding the proton transfer from Asp98 to nitrite.

Unexpected Roles of a Tether Harboring a Tyrosine Gatekeeper Residue in Modular Nitrite Reductase Catalysis

It is generally assumed that tethering enhances rates of electron harvesting and delivery to active sites in multidomain enzymes by proximity and sampling mechanisms. Here, we explore this idea in a tethered 3-domain, trimeric copper-containing nitrite reductase. By reverse engineering, we find that tethering does not enhance the rate of electron delivery from its pendant cytochrome c to the catalytic copper-containing core. Using a linker that harbors a gatekeeper tyrosine in a nitrite access channel, the tethered haem domain enables catalysis by other mechanisms. Tethering communicates the redox state of the haem to the distant T2Cu center that helps initiate substrate binding for catalysis. It also tunes copper reduction potentials, suppresses reductive enzyme inactivation, enhances enzyme affinity for substrate, and promotes intercopper electron transfer. Tethering has multiple unanticipated beneficial roles, the combination of which fine-tunes function beyond simplistic mechanisms expected from proximity and restrictive sampling models.

Nitrite reductase activity of heme and copper bound Aβ peptides

A significant abundance of copper (Cu) and iron in amyloid β (Aβ) plaques, and several heme related metabolic disorders are directly correlated with Alzheimer's disease (AD), and these together with co-localization of Aβ plaques with heme rich deposits in the brains of AD sufferers indicates a possible association of the said metals with the disease. Recently, the Aβ peptides have been found to bind heme and Cu individually as well as simultaneously. Another significant finding relevant to this is the lower levels of nitrite and nitrate found in the brains of patients suffering from AD. In this study, a combination of absorption and electron paramagnetic resonance spectroscopy and kinetic assays have been used to study the interaction of nitrite with the metal bound Aβ complexes. The data indicate that heme(III)-Cu(i)-Aβ, heme(II)-Cu(i)-Aβ, heme(II)-Aβ and Cu(i)-Aβ can reduce nitrite to nitric oxide (NO), an important biological messenger also related to AD, and thus behave as nitrite reductases. However these complexes reduce nitrite at different rates with heme(III)-Cu(i)-Aβ being the fastest following an inner sphere electron transfer mechanism. The rest of the metal-Aβ adducts follow an outer sphere electron transfer mechanism during nitrite reduction. Protonation from the Arg5 residue triggering the N-O bond heterolysis in heme(III) bound nitrite with a simultaneous electron transfer from the Cu(i) center to produce NO is the rate determining step, indicating a proton transfer followed by electron transfer (PTET) mechanism.

Noncoded Amino Acids in de Novo Metalloprotein Design: Controlling Coordination Number and Catalysis

The relationship between structure and function has long been one of the major points of investigation in Biophysics. Understanding how much, or how little, of a protein's often complicated structure is necessary for its function can lead to directed therapeutic strategies and would allow one to design proteins for specific desired functions. Studying protein function by de novo design builds the functionality from the ground up in a completely unrelated and noncoded protein scaffold. Our lab has used this strategy to study heavy and transition metal binding within the TRI family of three stranded coiled coil (3SCC) constructs to understand coordination geometry and metalloenzyme catalytic control within a protein environment. These peptides contain hydrophobic layers within the interior of the 3SCC, which one can mutate to metal binding residues to create a minimal metal binding site, while solid phase synthesis allows our lab to easily incorporate a number of noncoded amino acids including d enantiomers of binding or secondary coordination sphere amino acids, penicillamine, or methylated versions of histidine. Our studies of Cd(II) binding to Cys₃ environments have determined, largely through the use of ¹¹³Cd NMR and ^111mCd PAC, that the coordination environment around a heavy metal can be controlled by incorporating noncoded amino acids in either the primary or secondary coordination spheres. We found mutating the metal binding amino acids to l-Pen can enforce trigonal Cd(II)S₃ geometry exclusively compared to the mixed coordination determined for l-Cys coordination. The same result can be achieved with secondary sphere mutations as well by incorporating d-Leu above a Cys₃. We hypothesize this latter effect is due to the increased steric packing above the metal binding site that occurs when the l-Leu oriented toward the N-terminus of the scaffold is mutated to d-Leu and oriented toward the C-terminus. Mutating the layer below Cys₃ to d-Leu instead formed a mixed 4- and 5-coordinate Cd(II)S₃(H₂O) and Cd(II)S₃(H₂O)₂ construct as steric bulk was decreased below the metal binding site. We have also applied noncoded amino acids to metalloenzyme systems by incorporating His residues that are methylated at the δ- or ε-nitrogen to enforce Cu(I) ligation to the opposite open nitrogen of His and found a 2 orders of magnitude increased catalytic efficiency for nitrite reductase activity with ε-nitrogen coordination compared to δ-nitrogen. These results exemplify the ability to tune coordination environment and catalytic efficiency within a de novo scaffold as well as the utility of noncoded amino acids to increase the chemist's toolbox. By furthering our understanding of metalloprotein design one could envision, through our use of amino acids not normally available to nature, that protein design laboratories will soon be capable of outperforming the native systems previously used as their benchmark of successful design. The ability to design proteins at this level would have far reaching and exciting benefits within various fields including medical and industrial applications.

Nitric oxide-release study of a bio-inspired copper(i)-nitrito complex under chemical and biological conditions

The selective and efficient nitrite reduction process is ubiquitous in biological systems. To understand copper-mediated nitrite reduction, we developed a bio-inspired model system to investigate the mechanism of copper-containing nitrite reductase. A well-characterized copper(i)-nitrate complex with amino functionalized 2-(diphenylphosphino)aniline ligands, [(Ph₂PC₆H₄(o-NH₂))₂Cu(ONO)], demonstrated the aniline protonation will cause NO release in an acidic environment. To further understand NO releasing ability, we also performed pH-dependency experiments and confocal imaging to release NO under physiological buffer conditions. According to titration and spectroscopic studies on the protonation reaction of complex [(Ph₂PC₆H₄(o-NH₂))₂Cu(ONO)], we proposed a mechanistic pathway for proton transfer and NO release. Furthermore, DFT calculations predicted that the release of NO takes place via aniline in both organic and aqueous media. These results highlight the importance of the proton-rich microenvironment around the copper(i)-nitrite core to induce nitrate reduction in a chemical and biological environment.

Development of de Novo Copper Nitrite Reductases: Where We Are and Where We Need To Go

The development of redox-active metalloprotein catalysts is a challenging objective of de novo protein design. Within this Perspective we detail our efforts to create a redox-active Cu nitrite reductase (NiR) by incorporating Cu into the hydrophobic interior of well-defined three-stranded coiled coils (3SCCs). The scaffold contains three histidine residues that provide a layer of three nitrogen donors that mimic the type 2 catalytic site of NiR. We have found that this strategy successfully produces an active and stable CuNiR model that functions for over 1000 turnovers. Spectroscopic evidence indicates that the Cu(I) site has a lower coordination number in comparison to the enzyme, whereas the Cu(II) geometry may more faithfully reproduce the NiR type 2 center. Mutations at the helical interface successfully produce a hydrogen bond between an interfacial Glu residue and the Culigating His residue, which allows for the tuning of the redox potential over a 100 mV range. We successfully created constructs with as much as a 120-fold improvement from the original design by modifying the steric bulk above or below the Cu binding site. These systems are now the most active water-soluble and stable artificial NiR catalysts yet produced. Several avenues for improving the catalytic efficiency of later designs are detailed within this Perspective, including adjustment of their resting oxidation state, the use of asymmetric scaffolds to allow for single amino acid mutation within the second coordination sphere, and the design of hydrogen-bonding networks to tune residue orientation and electronics. Through these studies the TRI-H system has given insight into the difficulties that arise in creating a de novo redox active enzyme. Work to improve upon this model will provide strategies by which redox-active de novo enzymes may be tuned and detail how native enzymes accomplish catalytic efficiencies through proton gated redox catalysis.

Crystallographic study of dioxygen chemistry in a copper-containing nitrite reductase from Geobacillus thermodenitrificans

Copper-containing nitrite reductases (CuNIRs) are multifunctional enzymes that catalyse the one-electron reduction of nitrite (NO₂^-) to nitric oxide (NO) and the two-electron reduction of dioxygen (O₂) to hydrogen peroxide (H₂O₂). In contrast to the mechanism of nitrite reduction, that of dioxygen reduction is poorly understood. Here, results from anaerobic synchrotron-radiation crystallography (SRX) and aerobic in-house radiation crystallography (iHRX) with a CuNIR from the thermophile Geobacillus thermodenitrificans (GtNIR) support the hypothesis that the dioxygen present in an aerobically manipulated crystal can bind to the catalytic type 2 copper (T2Cu) site of GtNIR during SRX experiments. The anaerobic SRX structure showed a dual conformation of one water molecule as an axial ligand in the T2Cu site, while previous aerobic SRX GtNIR structures were refined as diatomic molecule-bound states. Moreover, an SRX structure of the C135A mutant of GtNIR with peroxide bound to the T2Cu atom was determined. The peroxide molecule was mainly observed in a side-on binding manner, with a possible minor end-on conformation. The structures provide insights into dioxygen chemistry in CuNIRs and hence help to unmask the other face of CuNIRs.

Structure and nitrite reduction reactivity study of bio-inspired copper(i)-nitro complexes in steric and electronic considerations of tridentate nitrogen ligands

Two copper(i)-nitro complexes [Tpm3-tBuCu(NO2)] (1) and [(Ph3P)2N][Tp3-tBuCu(NO2)] (2), containing steric bulky neutral tris(3-tert-butylpyrazolyl)methane and anionic hydrotris(3-tert-butylpyrazolyl)borate ligands, have been synthesized and characterized. Complex 2 adopts a unique κ2-binding mode of Tp3-tBu around the copper(i)-nitro environment in the solid state and shows a four-coordinated tetrahedral geometry surrounded by a nitro and three pz3-tBu groups in solution. Both complexes 1 and 2 allow for the stoichiometric reduction of NO2- to NO with H+ addition. The results of this effort show that increasing steric bulk and electron donation properties on the nitrogen ancillary ligand will improve the nitrite reduction ability of the copper(i)-nitro model complexes.

Modifying the Steric Properties in the Second Coordination Sphere of Designed Peptides Leads to Enhancement of Nitrite Reductase Activity

Protein design is a useful strategy to interrogate the protein structure-function relationship. We demonstrate using a highly modular 3-stranded coiled coil (TRI-peptide system) that a functional type 2 copper center exhibiting copper nitrite reductase (NiR) activity exhibits the highest homogeneous catalytic efficiency under aqueous conditions for the reduction of nitrite to NO and H₂ O. Modification of the amino acids in the second coordination sphere of the copper center increases the nitrite reductase activity up to 75-fold compared to previously reported systems. We find also that steric bulk can be used to enforce a three-coordinate Cu^I in a site, which tends toward two-coordination with decreased steric bulk. This study demonstrates the importance of the second coordination sphere environment both for controlling metal-center ligation and enhancing the catalytic efficiency of metalloenzymes and their analogues.

Intra-electron transfer induced by protonation in copper-containing nitrite reductase

Electron transfer between two Cu sites in the enzyme induced by protonation of remote catalytic residues.

Peptide Inhibitors Targeting the Neisseria gonorrhoeae Pivotal Anaerobic Respiration Factor AniA

Neisseria gonorrhoeae causes the sexually transmitted infection gonorrhea, which is highly prevalent worldwide and has a major impact on reproductive and neonatal health. The superbug status of N. gonorrhoeae necessitates the development of drugs with different mechanisms of action. Here, we focused on targeting the nitrite reductase AniA, which is a pivotal component of N. gonorrhoeae anaerobic respiration and biofilm formation. Our studies showed that gonococci expressing AniA containing the altered catalytic residues D137A and H280A failed to grow under anaerobic conditions, demonstrating that the nitrite reductase function is essential. To facilitate the pharmacological targeting of AniA, new crystal structures of AniA were refined to 1.90-Å and 2.35-Å resolutions, and a phage display approach with libraries expressing randomized linear dodecameric peptides or heptameric peptides flanked by a pair of cysteine residues was utilized. Biopanning experiments led to the identification of 29 unique peptides, with 1 of them, C7-3, being identified multiple times. Evaluation of their ability to interact with AniA using enzyme-linked immunosorbent assay and computational docking studies revealed that C7-3 was the most promising inhibitor, binding near the type 2 copper site of the enzyme, which is responsible for interaction with nitrite. Subsequent enzymatic assays and biolayer interferometry with a synthetic C7-3 and its derivatives, C7-3m1 and C7-3m2, demonstrated potent inhibition of AniA. Finally, the MIC₅₀ value of C7-3 and C7-3m2 against anaerobically grown N. gonorrhoeae was 0.6 mM. We present the first peptide inhibitors of AniA, an enzyme that should be further exploited for antigonococcal drug development.

Active-site protein dynamics and solvent accessibility in native Achromobacter cycloclastes copper nitrite reductase

Microbial nitrite reductases are denitrifying enzymes that are a major component of the global nitrogen cycle. Multiple structures measured from one crystal (MSOX data) of copper nitrite reductase at 240 K, together with molecular-dynamics simulations, have revealed protein dynamics at the type 2 copper site that are significant for its catalytic properties and for the entry and exit of solvent or ligands to and from the active site. Molecular-dynamics simulations were performed using different protonation states of the key catalytic residues (AspCAT and HisCAT) involved in the nitrite-reduction mechanism of this enzyme. Taken together, the crystal structures and simulations show that the AspCAT protonation state strongly influences the active-site solvent accessibility, while the dynamics of the active-site 'capping residue' (IleCAT), a determinant of ligand binding, are influenced both by temperature and by the protonation state of AspCAT. A previously unobserved conformation of IleCAT is seen in the elevated temperature series compared with 100 K structures. DFT calculations also show that the loss of a bound water ligand at the active site during the MSOX series is consistent with reduction of the type 2 Cu atom.

New molecular packing in a crystal of pseudoazurin from Alcaligenes faecalis: a double-helical arrangement of blue copper

Pseudoazurin from the denitrifying bacterium Alcaligenes faecalis (AfPAz) is a blue copper protein and functions as an electron donor to copper-containing nitrite reductase (CuNIR). Conventionally, AfPAz has been crystallized using highly concentrated ammonium sulfate as a precipitant. Here, a needle-like crystal of AfPAz grown in a solution containing a macromolecular precipitant, polyethylene glycol 8000 (PEG 8000), is reported. The crystal belonged to space group P61, with unit-cell parameters a = b = 68.7, c = 94.2 Å. The structure has been determined and refined at 2.6 Å resolution. The asymmetric unit contained two AfPAz molecules contacting each other on negatively charged surfaces. The molecular packing of the crystal showed a right-handed double-helical arrangement of AfPAz molecules and hence of blue copper sites. This structure provides insight into the excluded-volume effect of PEG and the manner of assembly of AfPAz.

Recent structural insights into the function of copper nitrite reductases

Copper nitrite reductases (CuNiRs) catalyse the reduction of nitrite to nitric oxide as part of the denitrification pathway. In this review, we describe insights into CuNiR function from structural studies.

Comparative analysis of amino acid composition in the active site of nirk gene encoding copper-containing nitrite reductase (CuNiR) in bacterial spp

The nirk gene encoding the copper-containing nitrite reductase (CuNiR), a key catalytic enzyme in the environmental denitrification process that helps to produce nitric oxide from nitrite. The molecular mechanism of denitrification process is definitely complex and in this case a theoretical investigation has been conducted to know the sequence information and amino acid composition of the active site of CuNiR enzyme using various Bioinformatics tools. 10 Fasta formatted sequences were retrieved from the NCBI database and the domain and disordered regions identification and phylogenetic analyses were done on these sequences. The comparative modeling of protein was performed through Modeller 9v14 program and visualized by PyMOL tools. Validated protein models were deposited in the Protein Model Database (PMDB) (PMDB id: PM0080150 to PM0080159). Active sites of nirk encoding CuNiR enzyme were identified by Castp server. The PROCHECK showed significant scores for four protein models in the most favored regions of the Ramachandran plot. Active sites and cavities prediction exhibited that the amino acid, namely Glycine, Alanine, Histidine, Aspartic acid, Glutamic acid, Threonine, and Glutamine were common in four predicted protein models. The present in silico study anticipates that active site analyses result will pave the way for further research on the complex denitrification mechanism of the selected species in the experimental laboratory.

Nitrite Reductase Activity in Engineered Azurin Variants

Nitrite reductase (NiR) activity was examined in a series of dicopper P.a. azurin variants in which a surface binding copper site was added through site-directed mutagenesis. Four variants were synthesized with copper binding motifs inspired by the catalytic type 2 copper binding sites found in the native noncoupled dinuclear copper enzymes nitrite reductase and peptidylglycine α-hydroxylating monooxygenase. The four azurin variants, denoted Az-NiR, Az-NiR3His, Az-PHM, and Az-PHM3His, maintained the azurin electron transfer copper center, with the second designed copper site located over 13 Å away and consisting of mutations Asn10His,Gln14Asp,Asn16His-azurin, Asn10His,Gln14His,Asn16His-azurin, Gln8Met,Gln14His,Asn16His-azurin, and Gln8His,Gln14His,Asn16His-azurin, respectively. UV-visible absorption spectroscopy, EPR spectroscopy, and electrochemistry of the sites demonstrate copper binding as well as interaction with small exogenous ligands. The nitrite reduction activity of the variants was determined, including the catalytic Michaelis-Menten parameters. The variants showed activity (0.34-0.59 min(-1)) that was slower than that of native NiRs but comparable to that of other model systems. There were small variations in activity of the four variants that correlated with the number of histidines in the added copper site. Catalysis was found to be reversible, with nitrite produced from NO. Reactions starting with reduced azurin variants demonstrated that electrons from both copper centers were used to reduce nitrite, although steady-state catalysis required the T2 copper center and did not require the T1 center. Finally, experiments separating rates of enzyme reduction from rates of reoxidation by nitrite demonstrated that the reaction with nitrite was rate limiting during catalysis.

Redox-coupled proton transfer mechanism in nitrite reductase revealed by femtosecond crystallography

Proton-coupled electron transfer (PCET), a ubiquitous phenomenon in biological systems, plays an essential role in copper nitrite reductase (CuNiR), the key metalloenzyme in microbial denitrification of the global nitrogen cycle. Analyses of the nitrite reduction mechanism in CuNiR with conventional synchrotron radiation crystallography (SRX) have been faced with difficulties, because X-ray photoreduction changes the native structures of metal centers and the enzyme-substrate complex. Using serial femtosecond crystallography (SFX), we determined the intact structures of CuNiR in the resting state and the nitrite complex (NC) state at 2.03- and 1.60-Å resolution, respectively. Furthermore, the SRX NC structure representing a transient state in the catalytic cycle was determined at 1.30-Å resolution. Comparison between SRX and SFX structures revealed that photoreduction changes the coordination manner of the substrate and that catalytically important His255 can switch hydrogen bond partners between the backbone carbonyl oxygen of nearby Glu279 and the side-chain hydroxyl group of Thr280. These findings, which SRX has failed to uncover, propose a redox-coupled proton switch for PCET. This concept can explain how proton transfer to the substrate is involved in intramolecular electron transfer and why substrate binding accelerates PCET. Our study demonstrates the potential of SFX as a powerful tool to study redox processes in metalloenzymes.