Motile properties of the kinesin-related Cin8p spindle motor extracted from Saccharomyces cerevisiae cells

Meiosis II spindle disassembly requires two distinct pathways

During exit from meiosis II, cells undergo several structural rearrangements, including disassembly of the meiosis II spindles and cytokinesis. Each of these changes is regulated to ensure that they occur at the proper time. Previous studies have demonstrated that both SPS1, which encodes a STE20-family GCKIII kinase, and AMA1, which encodes a meiosis-specific activator of the Anaphase Promoting Complex, are required for both meiosis II spindle disassembly and cytokinesis in the budding yeast Saccharomyces cerevisiae. We examine the relationship between meiosis II spindle disassembly and cytokinesis and find that the meiosis II spindle disassembly failure in sps1Δ and ama1∆ cells is not the cause of the cytokinesis defect. We also see that the spindle disassembly defects in sps1Δ and ama1∆ cells are phenotypically distinct. We examined known microtubule-associated proteins Ase1, Cin8, and Bim1, and found that AMA1 is required for the proper loss of Ase1 and Cin8 on meiosis II spindles while SPS1 is required for Bim1 loss in meiosis II. Taken together, these data indicate that SPS1 and AMA1 promote distinct aspects of meiosis II spindle disassembly, and that both pathways are required for the successful completion of meiosis.

Cytokinesis in Trypanosoma brucei relies on an orphan kinesin that dynamically crosslinks microtubules

Many single-celled eukaryotes have complex cell morphologies defined by microtubules arranged into higher-order structures. The auger-like shape of the parasitic protist Trypanosoma brucei (T. brucei) is mediated by a parallel array of microtubules that underlies the plasma membrane. The subpellicular array must be partitioned and segregated using a microtubule-based mechanism during cell division. We previously identified an orphan kinesin, KLIF, that localizes to the ingressing cleavage furrow and is essential for the completion of cytokinesis. We have characterized the biophysical properties of a truncated KLIF construct in vitro to gain mechanistic insight into the function of this novel kinesin. We find that KLIF is a non-processive dimeric kinesin that dynamically crosslinks microtubules. Microtubules crosslinked by KLIF in an antiparallel orientation are translocated relative to one another, while microtubules crosslinked parallel to one another remain static, resulting in the formation of organized parallel bundles. In addition, we find that KLIF stabilizes the alignment of microtubule plus ends. These features provide a mechanistic understanding for how KLIF functions to form a new pole of aligned microtubule plus ends that defines the shape of the new cell posterior, which is an essential requirement for the completion of cytokinesis in T. brucei.

Comparison of Concanavalin A and Poly-L-lysine as Cell Adhesives for Routine Yeast Microscopy Applications

A frequently encountered problem with imaging budding yeast specimens by light microscopy is that the cells do not adhere well to glass microscope slides. Frustratingly, cells that initially appear stationary in the visual field often become displaced and float away. The development of immunofluorescence microscopy methods for yeast led to the widespread use of poly-L-lysine as an adhesive for cell immobilization. More recently, the lectin-binding protein Concanavalin A has also been used as an adhesive that may be less familiar to yeast investigators. Here we directly compare the ability of poly-L-lysine and Concanavalin A to adhere yeast to glass microscope slides using several different assays. Using a simple coating procedure, we find that 1 mg/ml Concanavalin A proves superior to various concentrations of poly-L-lysine under all conditions tested, and that Concanavalin A can be used as an adhesive for live cell imaging without impairing yeast proliferation or cell division kinetics. Importantly, we also delineate forms of sample preparation that are or are not compatible with Concanavalin A. Overall, we hope our findings will bring Concanavalin A to the attention of a broad spectrum of the yeast community for their microscopy needs.

Intracellular functions and motile properties of bi-directional kinesin-5 Cin8 are regulated by neck linker docking

In this study, we analyzed intracellular functions and motile properties of neck-linker (NL) variants of the bi-directional S. cerevisiae kinesin-5 motor, Cin8. We also examined – by modeling – the configuration of H-bonds during NL docking. Decreasing the number of stabilizing H-bonds resulted in partially functional variants, as long as a conserved backbone H-bond at the N-latch position (proposed to stabilize the docked conformation of the NL) remained intact. Elimination of this conserved H-bond resulted in production of a non-functional Cin8 variant. Surprisingly, additional H-bond stabilization of the N-latch position, generated by replacement of the NL of Cin8 by sequences of the plus-end directed kinesin-5 Eg5, also produced a nonfunctional variant. In that variant, a single replacement of N-latch asparagine with glycine, as present in Cin8, eliminated the additional H-bond stabilization and rescued the functional defects. We conclude that exact N-latch stabilization during NL docking is critical for the function of bi-directional kinesin-5 Cin8.

Mechanisms by Which Kinesin-5 Motors Perform Their Multiple Intracellular Functions

Bipolar kinesin-5 motor proteins perform multiple intracellular functions, mainly during mitotic cell division. Their specialized structural characteristics enable these motors to perform their essential functions by crosslinking and sliding apart antiparallel microtubules (MTs). In this review, we discuss the specialized structural features of kinesin-5 motors, and the mechanisms by which these features relate to kinesin-5 functions and motile properties. In addition, we discuss the multiple roles of the kinesin-5 motors in dividing as well as in non-dividing cells, and examine their roles in pathogenetic conditions. We describe the recently discovered bidirectional motility in fungi kinesin-5 motors, and discuss its possible physiological relevance. Finally, we also focus on the multiple mechanisms of regulation of these unique motor proteins.

A Kinesin-5, Cin8, Recruits Protein Phosphatase 1 to Kinetochores and Regulates Chromosome Segregation

Kinesin-5 is a highly conserved homo-tetrameric protein complex responsible for crosslinking microtubules and pushing spindle poles apart. The budding yeast Kinesin-5, Cin8, is highly concentrated at kinetochores in mitosis before anaphase, but its functions there are largely unsolved. Here, we show that Cin8 localizes to kinetochores in a cell-cycle-dependent manner and concentrates near the microtubule binding domains of Ndc80 at metaphase. Cin8's kinetochore localization depends on the Ndc80 complex, kinetochore microtubules, and the Dam1 complex. Consistent with its kinetochore localization, a Cin8 deletion induces a loss of tension at the Ndc80 microtubule binding domains and a major delay in mitotic progression. Cin8 associates with Protein Phosphatase 1 (PP1), and mutants that inhibit its PP1 binding also induce a loss of tension at the Ndc80 microtubule binding domains and delay mitotic progression. Taken together, our results suggest that Cin8-PP1 plays a critical role at kinetochores to promote accurate chromosome segregation by controlling Ndc80 attachment to microtubules.

Bidirectional motility of kinesin-5 motor proteins: structural determinants, cumulative functions and physiological roles

Mitotic kinesin-5 bipolar motor proteins perform essential functions in mitotic spindle dynamics by crosslinking and sliding antiparallel microtubules (MTs) apart within the mitotic spindle. Two recent studies have indicated that single molecules of Cin8, the Saccharomyces cerevisiae kinesin-5 homolog, are minus end-directed when moving on single MTs, yet switch directionality under certain experimental conditions (Gerson-Gurwitz et al., EMBO J 30:4942-4954, 2011; Roostalu et al., Science 332:94-99, 2011). This finding was unexpected since the Cin8 catalytic motor domain is located at the N-terminus of the protein, and such kinesins have been previously thought to be exclusively plus end-directed. In addition, the essential intracellular functions of kinesin-5 motors in separating spindle poles during mitosis can only be accomplished by plus end-directed motility during antiparallel sliding of the spindle MTs. Thus, the mechanism and possible physiological role of the minus end-directed motility of kinesin-5 motors remain unclear. Experimental and theoretical studies from several laboratories in recent years have identified additional kinesin-5 motors that are bidirectional, revealed structural determinants that regulate directionality, examined the possible mechanisms involved and have proposed physiological roles for the minus end-directed motility of kinesin-5 motors. Here, we summarize our current understanding of the remarkable ability of certain kinesin-5 motors to switch directionality when moving along MTs.

Three Cdk1 sites in the kinesin-5 Cin8 catalytic domain coordinate motor localization and activity during anaphase

The bipolar kinesin-5 motors perform essential functions in mitotic spindle dynamics. We previously demonstrated that phosphorylation of at least one of the Cdk1 sites in the catalytic domain of the Saccharomyces cerevisiae kinesin-5 Cin8 (S277, T285, S493) regulates its localization to the anaphase spindle. The contribution of these three sites to phospho-regulation of Cin8, as well as the timing of such contributions, remains unknown. Here, we examined the function and spindle localization of phospho-deficient (serine/threonine to alanine) and phospho-mimic (serine/threonine to aspartic acid) Cin8 mutants. In vitro, the three Cdk1 sites undergo phosphorylation by Clb2-Cdk1. In cells, phosphorylation of Cin8 affects two aspects of its localization to the anaphase spindle, translocation from the spindle-pole bodies (SPBs) region to spindle microtubules (MTs) and the midzone, and detachment from the mitotic spindle. We found that phosphorylation of S277 is essential for the translocation of Cin8 from SPBs to spindle MTs and the subsequent detachment from the spindle. Phosphorylation of T285 mainly affects the detachment of Cin8 from spindle MTs during anaphase, while phosphorylation at S493 affects both the translocation of Cin8 from SPBs to the spindle and detachment from the spindle. Only S493 phosphorylation affected the anaphase spindle elongation rate. We conclude that each phosphorylation site plays a unique role in regulating Cin8 functions and postulate a model in which the timing and extent of phosphorylation of the three sites orchestrates the anaphase function of Cin8.

The yeast kinesin-5 Cin8 interacts with the microtubule in a noncanonical manner

Kinesin motors play central roles in establishing and maintaining the mitotic spindle during cell division. Unlike most other kinesins, Cin8, a kinesin-5 motor in Saccharomyces cerevisiae, can move bidirectionally along microtubules, switching directionality according to biochemical conditions, a behavior that remains largely unexplained. To this end, we used biochemical rate and equilibrium constant measurements as well as cryo-electron microscopy methodologies to investigate the microtubule interactions of the Cin8 motor domain. These experiments unexpectedly revealed that, whereas Cin8 ATPase kinetics fell within measured ranges for kinesins (especially kinesin-5 proteins), approximately four motors can bind each αβ-tubulin dimer within the microtubule lattice. This result contrasted with those observations on other known kinesins, which can bind only a single "canonical" site per tubulin dimer. Competition assays with human kinesin-5 (Eg5) only partially abrogated this behavior, indicating that Cin8 binds microtubules not only at the canonical site, but also one or more separate ("noncanonical") sites. Moreover, we found that deleting the large, class-specific insert in the microtubule-binding loop 8 reverts Cin8 to one motor per αβ-tubulin in the microtubule. The novel microtubule-binding mode of Cin8 identified here provides a potential explanation for Cin8 clustering along microtubules and potentially may contribute to the mechanism for direction reversal.

A potential physiological role for bi-directional motility and motor clustering of mitotic kinesin-5 Cin8 in yeast mitosis

The bipolar kinesin-5 Cin8 switches from minus- to plus-end-directed motility under various conditions in vitro The mechanism and physiological significance of this switch remain unknown. Here, we show that under high ionic strength conditions, Cin8 moves towards and concentrates in clusters at the minus ends of stable and dynamic microtubules. Clustering of Cin8 induces a switch from fast minus- to slow plus-end-directed motility and forms sites that capture antiparallel microtubules (MTs) and induces their sliding apart through plus-end-directed motility. In early mitotic cells with monopolar spindles, Cin8 localizes near the spindle poles at microtubule minus ends. This localization is dependent on the minus-end-directed motility of Cin8. In cells with assembled bipolar spindles, Cin8 is distributed along the spindle microtubules. We propose that minus-end-directed motility is required for Cin8 clustering near the spindle poles before spindle assembly. Cin8 clusters promote the capture of microtubules emanating from the neighboring spindle poles and mediate their antiparallel sliding. This activity is essential to maximize microtubule crosslinking before bipolar spindle assembly and to induce the initial separation of the spindle poles.

Motile properties of the bi-directional kinesin-5 Cin8 are affected by phosphorylation in its motor domain

The Saccharomyces cerevisiae kinesin-5 Cin8 performs essential mitotic functions in spindle assembly and anaphase B spindle elongation. Recent work has shown that Cin8 is a bi-directional motor which moves towards the minus-end of microtubules (MTs) under high ionic strength (IS) conditions and changes directionality in low IS conditions and when bound between anti-parallel microtubules. Previous work from our laboratory has also indicated that Cin8 is differentially phosphorylated during late anaphase at cyclin-dependent kinase 1 (Cdk1)-specific sites located in its motor domain. In vivo, such phosphorylation causes Cin8 detachment from spindles and reduces the spindle elongation rate, while maintaining proper spindle morphology. To study the effect of phosphorylation on Cin8 motor function, we examined in vitro motile properties of wild type Cin8, as well as its phosphorylation using phospho-deficient and phospho-mimic variants, in a single molecule fluorescence motility assay. Analysis was performed on whole cell extracts and on purified Cin8 samples. We found that addition of negative charges in the phospho-mimic mutant weakened the MT-motor interaction, increased motor velocity and promoted minus-end-directed motility. These results indicate that phosphorylation in the catalytic domain of Cin8 regulates its motor function.

Factors that Control Mitotic Spindle Dynamics

Mitosis is the last phase of the cell cycle and it leads to the formation of two daughter cells with the same genetic information. This process must occurr in a very precise way and this task is essential to preserve genetic stability and to maintain cell viability. Accurate chromosome segregation during mitosis is brought about by an important cellular organelle: the mitotic spindle. This structure is made of microtubules, polymers of alpha and beta tubulin, and it is highly dynamic during the cell cycle: it emanates from two microtubules organizing centers (Spindle Pole Bodies, SPBs, in yeast) that are essential to build a short bipolar spindle, and it undergoes two steps of elongation during anaphase A and anaphase B in order to separate sister chromatids. Several proteins are involved in the control of mitotic spindle dynamics and their activity is tightly coordinated with other cell cycle events and with cell cycle progression.

Mitotic slippage and expression of survivin are linked to differential sensitivity of human cancer cell-lines to the Kinesin-5 inhibitor monastrol

The mitotic Kinesin-5 motor proteins crosslink and slide apart antiparallel spindle microtubules, thus performing essential functions in mitotic spindle dynamics. Specific inhibition of their function by monastrol-like small molecules has been examined in clinical trials as anticancer treatment, with only partial success. Thus, strategies that improve the efficiency of monastrol-like anticancer drugs are required. In the current study, we examined the link between sensitivity to monastrol and occurrence of mitotic slippage in several human cell-lines. We found that the rank of sensitivity to monastrol, from most sensitive to least sensitive, is: AGS > HepG2 > Lovo > Du145 ≥ HT29. We show correlation between the sensitivity of a particular cell-line to monastrol and the tendency of the same cell-line to undergo mitotic slippage. We also found that in the monastrol resistant HT29 cells, prolonged monastrol treatments increase mRNA and protein levels of the chromosomal passenger protein survivin. In contrast, survivin levels are not increased by this treatment in the monastrol-sensitive AGS cells. We further show that over-expression of survivin in the monastrol-sensitive AGS cells reduces mitotic slippage and increases resistance to monastrol. Finally, we show that during short exposure to monastrol, Si RNA silencing of survivin expression reduces cell viability in both AGS and HT29 cells. Our data suggest that the efficiency of anti-cancer treatment with specific kinesin-5 inhibitors may be improved by modulation of expression levels of survivin.

Deletion of the Tail Domain of the Kinesin-5 Cin8 Affects Its Directionality

The bipolar kinesin-5 motors are one of the major players that govern mitotic spindle dynamics. Their bipolar structure enables them to cross-link and slide apart antiparallel microtubules (MTs) emanating from the opposing spindle poles. The budding yeast kinesin-5 Cin8 was shown to switch from fast minus-end- to slow plus-end-directed motility upon binding between antiparallel MTs. This unexpected finding revealed a new dimension of cellular control of transport, the mechanism of which is unknown. Here we have examined the role of the C-terminal tail domain of Cin8 in regulating directionality. We first constructed a stable dimeric Cin8/kinesin-1 chimera (Cin8Kin), consisting of head and neck linker of Cin8 fused to the stalk of kinesin-1. As a single dimeric motor, Cin8Kin switched frequently between plus and minus directionality along single MTs, demonstrating that the Cin8 head domains are inherently bidirectional, but control over directionality was lost. We next examined the activity of a tetrameric Cin8 lacking only the tail domains (Cin8Δtail). In contrast to wild-type Cin8, the motility of single molecules of Cin8Δtail in high ionic strength was slow and bidirectional, with almost no directionality switches. Cin8Δtail showed only a weak ability to cross-link MTs in vitro. In vivo, Cin8Δtail exhibited bias toward the plus-end of the MTs and was unable to support viability of cells as the sole kinesin-5 motor. We conclude that the tail of Cin8 is not necessary for bidirectional processive motion, but is controlling the switch between plus- and minus-end-directed motility.

Regulation of bi-directional movement of single kinesin-5 Cin8 molecules

Kinesin-5 mechanoenzymes drive mitotic spindle dynamics as slow, processive microtubule (MT)-plus-end directed motors. Surprisingly, the Saccharomyces cerevisiae kinesin-5 Cin8 was recently found to be bi-directional: it can move processively in both directions on MTs. Two hypotheses have been suggested for the mechanism of the directionality switch: (1) single molecules of Cin8 are intrinsically minus-end directed, but mechanical coupling between two or more motors triggers the switch; (2) a single motor can switch direction, and "cargo binding" i.e., binding between two MTs triggers the switch to plus-end motility. Single-molecule fluorescence data we published recently, and augment here, favor hypothesis (2). In low-ionic-strength conditions, single molecules of Cin8 move in both minus- and plus-end directions. Fluorescence photo bleaching data rule out aggregation of Cin8 while they move in the plus and in the minus direction. The evidence thus points toward cargo regulation of directionality, which is likely to be related to cargo regulation in other kinesins. The molecular mechanisms of this regulation, however, remain to be elucidated.

A surprising twist

X-ray crystallography has revealed an unusual structural element in kinesin-5 motor proteins.

Kinesin-5 Kip1 is a bi-directional motor that stabilizes microtubules and tracks their plus-ends in vivo

In this study, we examined the anaphase functions of the S. cerevisiae kinesin-5 homolog Kip1. We show that Kip1 is attached to the mitotic spindle midzone during late anaphase. This attachment is essential to stabilize interpolar microtubule (iMTs) plus-ends. By detailed examination of iMT dynamics we show that at the end of anaphase, iMTs depolymerize in two stages: during the first stage, one pair of anti-parallel iMTs depolymerizes at a velocity of 7.7 µm/minute; during the second stage, ∼90 seconds later, the remaining pair of iMTs depolymerizes at a slower velocity of 5.4 µm/minute. We show that upon the second depolymerization stage, which coincides with spindle breakdown, Kip1 follows the plus-ends of depolymerizing iMTs and translocates toward the spindle poles. This movement is independent of mitotic microtubule motor proteins or the major plus-end binding or tracking proteins. In addition, we show that Kip1 processively tracks the plus-ends of growing and shrinking MTs, both inside and outside the nucleus. The plus-end tracking activity of Kip1 requires its catalytic motor function, because a rigor mutant of Kip1 does not exhibit this activity. Finally, we show that Kip1 is a bi-directional motor: in vitro, at high ionic strength conditions, single Kip1 molecules move processively in the minus-end direction of the MTs, whereas in a multi-motor gliding assay, Kip1 is plus-end directed. The bi-directionality and plus-end tracking activity of Kip1, properties revealed here for the first time, allow Kip1 to perform its multiple functions in mitotic spindle dynamics and to partition the 2-micron plasmid.

Directionality of individual kinesin-5 Cin8 motors is modulated by loop 8, ionic strength and microtubule geometry

Kinesin-5 motors fulfil essential roles in mitotic spindle morphogenesis and dynamics as slow, processive microtubule (MT) plus-end directed motors. The Saccharomyces cerevisiae kinesin-5 Cin8 was found, surprisingly, to switch directionality. Here, we have examined directionality using single-molecule fluorescence motility assays and live-cell microscopy. On spindles, Cin8 motors mostly moved slowly (∼25 nm/s) towards the midzone, but occasionally also faster (∼55 nm/s) towards the spindle poles. In vitro, individual Cin8 motors could be switched by ionic conditions from rapid (380 nm/s) and processive minus-end to slow plus-end motion on single MTs. At high ionic strength, Cin8 motors rapidly alternated directionalities between antiparallel MTs, while driving steady plus-end relative sliding. Between parallel MTs, plus-end motion was only occasionally observed. Deletion of the uniquely large insert in loop 8 of Cin8 induced bias towards minus-end motility and affected the ionic strength-dependent directional switching of Cin8 in vitro. The deletion mutant cells exhibited reduced midzone-directed motility and efficiency to support spindle elongation, indicating the importance of directionality control for the anaphase function of Cin8.

Cdk1 promotes kinetochore bi-orientation and regulates Cdc20 expression during recovery from spindle checkpoint arrest

The spindle assembly checkpoint (SAC), an evolutionarily conserved surveillance pathway, prevents chromosome segregation in response to conditions that disrupt the kinetochore-microtubule attachment. Removal of the checkpoint-activating stimulus initiates recovery during which spindle integrity is restored, kinetochores become bi-oriented, and cells initiate anaphase. Whether recovery ensues passively after the removal of checkpoint stimulus, or requires mediation by specific effectors remains uncertain. Here, we report two unrecognized functions of yeast Cdk1 required for efficient recovery from SAC-induced arrest. We show that Cdk1 promotes kinetochore bi-orientation during recovery by restraining premature spindle elongation thereby extinguishing SAC signalling. Moreover, Cdk1 is essential for sustaining the expression of Cdc20, an activator of the anaphase promoting complex/cyclosome (APC/C) required for anaphase progression. We suggest a model in which Cdk1 activity promotes recovery from SAC-induced mitotic arrest by regulating bi-orientation and APC/C activity. Our findings provide fresh insights into the regulation of mitosis and have implications for the therapeutic efficacy of anti-mitotic drugs.

Functional characterization of the Saccharomyces cerevisiae protein Chl1 reveals the role of sister chromatid cohesion in the maintenance of spindle length during S-phase arrest

BACKGROUND

Metaphase cells have short spindles for efficient bi-orientation of chromosomes. The cohesin proteins hold sister chromatids together, creating Sister Chromatid Cohesion (SCC) that helps in the maintenance of short spindle lengths in metaphase. The budding yeast protein Chl1p, which has human homologs, is required for DNA damage repair, recombination, transcriptional silencing and aging. This protein is also needed to establish SCC between sister chromatids in S-phase.

RESULTS

In the present study we have further characterized Chl1p for its role in the yeast Saccharomyces cerevisiae when cells are under replication stress. We show that when DNA replication is arrested by hydroxyurea (HU), the chl1 mutation causes growth deficiency and a mild loss in cell viability. Although both mutant and wild-type cells remained arrested with undivided nuclei, mutant cells had mitotic spindles, which were about 60-80% longer than wild-type spindles. Spindle extension occurred in S-phase in the presence of an active S-phase checkpoint pathway. Further, the chl1 mutant did not show any kinetochore-related defect that could have caused spindle extension. These cells were affected in the retention of SCC in that they had only about one-fourth of the normal levels of the cohesin subunit Scc1p at centromeres, which was sufficient to bi-orient the chromosomes. The mutant cells showed defects in SCC, both during its establishment in S-phase and in its maintenance in G2. Mutants with partial and pericentromeric cohesion defects also showed spindle elongation when arrested in S-phase by HU.

CONCLUSIONS

Our work shows that Chl1p is required for normal growth and cell viability in the presence of the replication block caused by HU. The absence of this protein does not, however, compromize the replication checkpoint pathway. Even though the chl1 mutation gives synthetic lethal interactions with kinetochore mutations, its absence does not affect kinetochore function; kinetochore-microtubule interactions remain unperturbed. Further, chl1 cells were found to lose SCC at centromeres in both S- and G2 phases, showing the requirement of Chl1p for the maintenance of cohesion in G2 phase of these cells. This work documents for the first time that SCC is an important determinant of spindle size in the yeast Saccharomyces cerevisiae when genotoxic agents cause S-phase arrest of cells.

Phospho-regulation of kinesin-5 during anaphase spindle elongation

The kinesin-5 Saccharomyces cerevisiae homologue Cin8 is shown here to be differentially phosphorylated during late anaphase at Cdk1-specific sites located in its motor domain. Wild-type Cin8 binds to the early-anaphase spindles and detaches from the spindles at late anaphase, whereas the phosphorylation-deficient Cin8-3A mutant protein remains attached to a larger region of the spindle and spindle poles for prolonged periods. This localization of Cin8-3A causes faster spindle elongation and longer anaphase spindles, which have aberrant morphology. By contrast, the phospho-mimic Cin8-3D mutant exhibits reduced binding to the spindles. In the absence of the kinesin-5 homologue Kip1, cells expressing Cin8-3D exhibit spindle assembly defects and are not viable at 37°C as a result of spindle collapse. We propose that dephosphorylation of Cin8 promotes its binding to the spindle microtubules before the onset of anaphase. In mid to late anaphase, phosphorylation of Cin8 causes its detachment from the spindles, which reduces the spindle elongation rate and aids in maintaining spindle morphology.

Directional switching of the kinesin Cin8 through motor coupling

Kinesin motor proteins are thought to move exclusively in either one or the other direction along microtubules. Proteins of the kinesin-5 family are tetrameric microtubule cross-linking motors important for cell division and differentiation in various organisms. Kinesin-5 motors are considered to be plus-end-directed. However, here we found that purified kinesin-5 Cin8 from budding yeast could behave as a bidirectional kinesin. On individual microtubules, single Cin8 motors were minus-end-directed motors, whereas they switched to plus-end-directed motility when working in a team of motors sliding antiparallel microtubules apart. This kinesin can thus change directionality of movement depending on whether it acts alone or in an ensemble.

B-cyclin/CDKs regulate mitotic spindle assembly by phosphorylating kinesins-5 in budding yeast

Although it has been known for many years that B-cyclin/CDK complexes regulate the assembly of the mitotic spindle and entry into mitosis, the full complement of relevant CDK targets has not been identified. It has previously been shown in a variety of model systems that B-type cyclin/CDK complexes, kinesin-5 motors, and the SCF^Cdc4 ubiquitin ligase are required for the separation of spindle poles and assembly of a bipolar spindle. It has been suggested that, in budding yeast, B-type cyclin/CDK (Clb/Cdc28) complexes promote spindle pole separation by inhibiting the degradation of the kinesins-5 Kip1 and Cin8 by the anaphase-promoting complex (APC^Cdh1). We have determined, however, that the Kip1 and Cin8 proteins are present at wild-type levels in the absence of Clb/Cdc28 kinase activity. Here, we show that Kip1 and Cin8 are in vitro targets of Clb2/Cdc28 and that the mutation of conserved CDK phosphorylation sites on Kip1 inhibits spindle pole separation without affecting the protein's in vivo localization or abundance. Mass spectrometry analysis confirms that two CDK sites in the tail domain of Kip1 are phosphorylated in vivo. In addition, we have determined that Sic1, a Clb/Cdc28-specific inhibitor, is the SCF^Cdc4 target that inhibits spindle pole separation in cells lacking functional Cdc4. Based on these findings, we propose that Clb/Cdc28 drives spindle pole separation by direct phosphorylation of kinesin-5 motors.

The assembly of a bipolar mitotic spindle is essential for the accurate segregation of sister chromatids during mitosis and, hence, for successful cell division. Spindle assembly depends on the successful duplication of the spindle poles, followed by their separation to opposing ends of the cell. Although it has been known for many years that B-cyclin/CDK complexes regulate the assembly of the mitotic spindle, the relevant CDK targets have not been identified. Motor proteins of the kinesin-5 family generate movement on the microtubules that make up the spindle and are believed to power spindle pole separation. By employing the budding yeast Saccharomyces cerevisiae as a model, we have found evidence that cyclin/CDKs control spindle assembly by phosphorylating the kinesins-5 Kip1 and Cin8. When phosphorylation at a conserved CDK site in the motor domain of Kip1 is blocked, spindle pole separation is greatly diminished but neither protein abundance nor localization is affected. We have also obtained direct evidence by mass spectrometry that Kip1 and Cin8 are phosphorylated in vivo at consensus CDK sites in their tail domains. Our findings suggest that B-cyclin/CDKs regulate spindle assembly by regulating kinesin-5 motor activity.

Regulation of centrosome separation in yeast and vertebrates: common threads

The assembly of a bipolar spindle is crucial for symmetric partitioning of duplicated chromosomes during cell division. Centrosomes (spindle pole body [SPB] in yeast) constitute the two poles of this bipolar structure and serve as microtubule nucleation centers. A eukaryotic cell enters the division cycle with one centrosome and duplicates it before spindle formation. A proteinaceous link keeps duplicated centrosomes together until it is severed at onset of mitosis, enabling centrosomes to migrate away from each other and assemble a characteristic mitotic spindle. Hence, centrosome separation is crucial in assembly of a bipolar spindle. Whereas centrosome (or SPB) duplication has been characterized in some detail, the separation process is less well understood. Here, we review recent studies that uncover new players and provide a greater understanding of the regulation of centrosome (or SPB) separation.

Midzone organization restricts interpolar microtubule plus-end dynamics during spindle elongation

To study the dynamics of interpolar microtubules (iMTs) in Saccharomyces cerevisiae cells, we photobleached a considerable portion of the middle region of anaphase spindles in cells expressing tubulin-green fluorescent protein (GFP) and followed fluorescence recovery at the iMT plus-ends. We found that during anaphase, iMTs show phases of fast growth and shrinkage that are restricted to the iMT plus-ends. Our data indicate that iMT plus-end dynamics are regulated during mitosis, as fluorescence recovery was faster in intermediate anaphase (30 s) compared with long (100 s) and pre-anaphase (80 s) spindles. We also observed that deletion of Cin8, a microtubule-crosslinking kinesin-5 motor protein, reduced the recovery rate in anaphase spindles, indicating that Cin8 contributes to the destabilization of iMT plus-ends. Finally, we show that in cells lacking the midzone organizing protein Ase1, iMTs are highly dynamic and are exchangeable throughout most of their length, indicating that midzone organization is essential for restricting iMT dynamics.

Design features of a mitotic spindle: balancing tension and compression at a single microtubule kinetochore interface in budding yeast

Accurate segregation of duplicated chromosomes ensures that daughter cells get one and only one copy of each chromosome. Errors in chromosome segregation result in aneuploidy and have severe consequences on human health. Incorrect chromosome number and chromosomal instability are hallmarks of tumor cells. Hence, segregation errors are thought to be a major cause of tumorigenesis. A study of the physical mechanical basis of chromosome segregation is essential to understand the processes that can lead to errors. Tremendous progress has been made in recent years in identifying the proteins necessary for chromosome movement and segregation, but the mechanism and structure of critical force generating components and the molecular basis of centromere stiffness remain poorly understood.

Chromosome congression by Kinesin-5 motor-mediated disassembly of longer kinetochore microtubules

During mitosis, sister chromatids congress to the spindle equator and are subsequently segregated via attachment to dynamic kinetochore microtubule (kMT) plus ends. A major question is how kMT plus-end assembly is spatially regulated to achieve chromosome congression. Here we find in budding yeast that the widely conserved kinesin-5 sliding motor proteins, Cin8p and Kip1p, mediate chromosome congression by suppressing kMT plus-end assembly of longer kMTs. Of the two, Cin8p is the major effector and its activity requires a functional motor domain. In contrast, the depolymerizing kinesin-8 motor Kip3p plays a minor role in spatial regulation of yeast kMT assembly. Our analysis identified a model where kinesin-5 motors bind to kMTs, move to kMT plus ends, and upon arrival at a growing plus end promote net kMT plus-end disassembly. In conclusion, we find that length-dependent control of net kMT assembly by kinesin-5 motors yields a simple and stable self-organizing mechanism for chromosome congression.

Slk19-dependent mid-anaphase pause in kinesin-5-mutated cells

We examined spindle elongation in anaphase in Saccharomyces cerevisiae cells mutated for the kinesin-5 motor proteins Cin8 and Kip1. Cells were deleted for KIP1 and/or expressed one of two motor-domain Cin8 mutants (Cin8-F467A or Cin8-R196K, which differ in their ability to bind microtubules in vitro, with Cin8-F467A having the weakest ability). We found that, in kinesin-5-mutated cells, predominantly in kip1 Delta cin8-F467A cells, anaphase spindle elongation was frequently interrupted after the fast phase, resulting in a mid-anaphase pause. Expression of kinesin-5 mutants also caused an asymmetric midzone location and enlarged midzone size, suggesting that proper organization of the midzone is required for continuous spindle elongation. We also examined the effects of components of the FEAR pathway, which is involved in the early-anaphase activation of Cdc14 regulatory phosphatase, on anaphase spindle elongation in kip1 Delta cin8-F467A cells. Deletion of SLK19, but not SPO12, eliminated the mid-anaphase pause, caused premature anaphase onset and defects in DNA division during anaphase, and reduced viability in these cells. Finally, overriding of the pre-anaphase checkpoint by overexpression of Cdc20 also eliminated the mid-anaphase pause and caused DNA deformation during anaphase in kip1 Delta cin8-F467A cells. We propose that transient activation of the pre-anaphase checkpoint in kinesin-5-mutated cells induces a Slk19-dependent mid-anaphase pause, which might be important for proper DNA segregation.

Intrinsic and cyclin-dependent kinase-dependent control of spindle pole body duplication in budding yeast

Centrosome duplication must be tightly controlled so that duplication occurs only once each cell cycle. Accumulation of multiple centrosomes can result in the assembly of a multipolar spindle and lead to chromosome mis-segregation and genomic instability. In metazoans, a centrosome-intrinsic mechanism prevents reduplication until centriole disengagement. Mitotic cyclin/cyclin-dependent kinases (CDKs) prevent reduplication of the budding yeast centrosome, called a spindle pole body (SPB), in late S-phase and G2/M, but the mechanism remains unclear. How SPB reduplication is prevented early in the cell cycle is also not understood. Here we show that, similar to metazoans, an SPB-intrinsic mechanism prevents reduplication early in the cell cycle. We also show that mitotic cyclins can inhibit SPB duplication when expressed before satellite assembly in early G1, but not later in G1, after the satellite had assembled. Moreover, electron microscopy revealed that SPBs do not assemble a satellite in cells expressing Clb2 in early G1. Finally, we demonstrate that Clb2 must localize to the cytoplasm in order to inhibit SPB duplication, suggesting the possibility for direct CDK inhibition of satellite components. These two mechanisms, intrinsic and extrinsic control by CDK, evoke two-step system that prevents SPB reduplication throughout the cell cycle.

A pathway containing the Ipl1/aurora protein kinase and the spindle midzone protein Ase1 regulates yeast spindle assembly

It is critical to elucidate the pathways that mediate spindle assembly and therefore ensure accurate chromosome segregation during cell division. Our studies of a unique allele of the budding yeast Ipl1/Aurora protein kinase revealed that it is required for centrosome-mediated spindle assembly in the absence of the BimC motor protein Cin8. In addition, we found that the Ase1 spindle midzone-associated protein is required for bipolar spindle assembly. The cin8 ipl1 and cin8 ase1 double mutant cells exhibit similar defects, and Ase1 overexpression completely restores spindle assembly in cin8 ipl1 strains. Consistent with the possibility that Ipl1 regulates Ase1, an ase1 mutant lacking the Ipl1 consensus phosphorylation sites cannot assemble spindles in the absence of Cin8. In addition, Ase1 phosphorylation and localization were altered in an ipl1 mutant. We therefore propose that Ipl1/Aurora and Ase1 constitute a previously unidentified spindle assembly pathway that becomes essential in the absence of Cin8.

Dynein-mediated pulling forces drive rapid mitotic spindle elongation in Ustilago maydis

Spindle elongation segregates chromosomes and occurs in anaphase, an essential step in mitosis. Dynein-mediated pulling forces position the spindle, but their role in anaphase is a matter of debate. Here, we demonstrate that dynein is responsible for rapid spindle elongation in the model fungus Ustilago maydis. We show that initial slow elongation is supported by kinesin-5, which is located in the spindle mid-zone. When the spindle reaches approximately 2 microm in length, the elongation rate increases four-fold. This coincides with the appearance of long and less-dynamic microtubules (MTs) at each pole that accumulate dynein at their tips. Laser-mediated nanosurgery revealed that these MTs exert pulling forces in control cells, but not in dynein mutants. In addition, dynein mutants undergo initial slow anaphase, but fail to establish less-dynamic MTs and do not perform rapid spindle elongation, suggesting that dynein drives anaphase B. This is most likely mediated by cortical sliding of astral MTs along stationary dynein, which is off-loaded from the MT plus-end to the cortex.

Homotetrameric form of Cin8p, a Saccharomyces cerevisiae kinesin-5 motor, is essential for its in vivo function

Kinesin-5 motor proteins are evolutionarily conserved and perform essential roles in mitotic spindle assembly and spindle elongation during anaphase. Previous studies demonstrated a specialized homotetrameric structure with two pairs of catalytic domains, one at each end of a dumbbell-shaped molecule. This suggests that they perform their spindle roles by cross-linking and sliding antiparallel spindle microtubules. However, the exact kinesin-5 sequence elements that are important for formation of the tetrameric complexes have not yet been identified. In addition, it has not been demonstrated that the homotetrameric form of these proteins is essential for their biological functions. Thus, we investigated a series of Saccharomyces cerevisiae Cin8p truncations and internal deletions, in order to identify structural elements in the Cin8p sequence that are required for Cin8p functionality, spindle localization, and multimerization. We found that all variants of Cin8p that are functional in vivo form tetrameric complexes. The first coiled-coil domain in the stalk of Cin8p, a feature that is shared by all kinesin-5 homologues, is required for its dimerization, and sequences in the last part of the stalk, specifically those likely involved in coiled-coil formation, are required for Cin8p tetramerization. We also found that dimeric forms of Cin8p that are nonfunctional in vivo can nonetheless bind to microtubules. These findings suggest that binding of microtubules is not sufficient for the functionality of Cin8p and that microtubule cross-linking by the tetrameric complex is essential for Cin8p mitotic functions.

Disjunction of conjoined twins: Cdk1, Cdh1 and separation of centrosomes

Accurate transmission of chromosomes from parent to progeny cell requires assembly of a bipolar spindle. Centrosomes (spindle pole body in yeast) are critical for the biogenesis of this complex mitotic apparatus since they confer bipolarity on the spindle and serve as the site of microtubule polymerization. In each division cycle, the centrosome is duplicated and the sister-centrosomes move away from each other, forming the two poles of the spindle. While the structure and the duplication of centrosomes have been investigated extensively, the understanding of the control of their segregation remains scant. Recent findings are beginning to yield insights into the regulation of centrosome segregation in yeast and its link to the mitotic kinase.

Cdk1 regulates centrosome separation by restraining proteolysis of microtubule-associated proteins

In yeast, separation of duplicated spindle pole bodies (SPBs) (centrosomes in higher eukaryotes) is an indispensable step in the assembly of mitotic spindle and is triggered by severing of the bridge that connects the sister SPBs. This process requires Cdk1 (Cdc28) activation by Tyrosine 19 dephosphorylation. We show that cells that fail to activate Cdk1 are devoid of spindles due to persistently active APCCdh1, which targets microtubule-associated proteins Cin8, Kip1 and Ase1 for degradation. Tyrosine 19 dephosphorylation of Cdk1 is necessary to specifically prevent proteolysis of these proteins. Interestingly, SPB separation is dependent on the microtubule-bundling activity of Cin8 but not on its motor function. Since ectopic expression of proteolysis-resistant Cin8, Kip1 or Ase1 is sufficient for SPB separation even in the absence of Cdc28-Clb activity, we suggest that stabilization of these mechanical force-generating proteins is the predominant role of Cdc28-Clb in centrosome separation.

Analysis of kinesin motor function at budding yeast kinetochores

Accurate chromosome segregation during mitosis requires biorientation of sister chromatids on the microtubules (MT) of the mitotic spindle. Chromosome–MT binding is mediated by kinetochores, which are multiprotein structures that assemble on centromeric (CEN) DNA. The simple CENs of budding yeast are among the best understood, but the roles of kinesin motor proteins at yeast kinetochores have yet to be determined, despite evidence of their importance in higher eukaryotes. We show that all four nuclear kinesins in Saccharomyces cerevisiae localize to kinetochores and function in three distinct processes. Kip1p and Cin8p, which are kinesin-5/BimC family members, cluster kinetochores into their characteristic bilobed metaphase configuration. Kip3p, a kinesin-8,-13/KinI kinesin, synchronizes poleward kinetochore movement during anaphase A. The kinesin-14 motor Kar3p appears to function at the subset of kinetochores that become detached from spindle MTs. These data demonstrate roles for structurally diverse motors in the complex processes of chromosome segregation and reveal important similarities and intriguing differences between higher and lower eukaryotes.

Gene function prediction from congruent synthetic lethal interactions in yeast

We predicted gene function using synthetic lethal genetic interactions between null alleles in Saccharomyces cerevisiae. Phenotypic and protein interaction data indicate that synthetic lethal gene pairs function in parallel or compensating pathways. Congruent gene pairs, defined as sharing synthetic lethal partners, are in single pathway branches. We predicted benomyl sensitivity and nuclear migration defects using congruence; these phenotypes were uncorrelated with direct synthetic lethality. We also predicted YLL049W as a new member of the dynein–dynactin pathway and provided new supporting experimental evidence. We performed synthetic lethal screens of the parallel mitotic exit network (MEN) and Cdc14 early anaphase release pathways required for late cell cycle. Synthetic lethal interactions bridged genes in these pathways, and high congruence linked genes within each pathway. Synthetic lethal interactions between MEN and all components of the Sin3/Rpd3 histone deacetylase revealed a novel function for Sin3/Rpd3 in promoting mitotic exit in parallel to MEN. These in silico methods can predict phenotypes and gene functions and are applicable to genomic synthetic lethality screens in yeast and analogous RNA interference screens in metazoans.

Mutations in the yeast kinesin-like Cin8p are alleviated by osmotic support

Loss of function of Cin8p (a yeast kinesin-like motor protein) in the absence of either Kip1p (a motor of the same family) or Dyn1p (the dynein heavy chain) is lethal. We report that cin8 mutants are sensitive to the cell wall disrupting agents calcofluor white and SDS. Conditionally lethal double mutants containing the temperature sensitive allele cin8-3 in a background deletion of either kip1 or dyn1 grew normally at the restrictive temperature when osmolytes such as sorbitol were added to the medium. Sorbitol could not alleviate the sensitivity of cin8 mutants to calcofluor and SDS. However, it rendered cells more resistant to the microtubule depolymerizing drugs benomyl and thiabendazole (TBZ). Our findings reveal a novel interaction between mitotic motor proteins and the cell wall and suggest that the induction of signaling pathways aimed at maintaining the cell wall suppresses phenotypes of mutations in microtubule-associated motor proteins through stabilization of microtubules.

Molecular dissection of the roles of nucleotide binding and hydrolysis in dynein's AAA domains in Saccharomyces cerevisiae

The motor protein cytoplasmic dynein is responsible for most of the minus-end-directed microtubule traffic within cells. Dynein contains four evolutionarily conserved AAA (ATPase associated with various cellular activities) domains that are thought to bind nucleotide; the role of nucleotide binding and hydrolysis in each of these four AAA domains has constituted an important and unresolved question in understanding dynein's mechanism. Using Saccharomyces cerevisiae cytoplasmic dynein as a model system, we mutagenized residues involved in nucleotide binding or hydrolysis in the four AAA domains and examined the ability of the mutant dyneins to mediate nuclear segregation in vivo and to bind microtubules in vitro. Our analysis shows that an AAA1 hydrolysis mutant blocks dynein function, whereas a triple AAA2/3/4 hydrolysis mutant does not, suggesting that nucleotide binding is required at only one site. We also show that nucleotide binding at AAA3, but not hydrolysis, is essential for motor activity in vivo and ATP-induced dissociation of dynein from microtubules, suggesting that this domain acts as a critical allosteric site. In contrast, mutations in AAA2 cause subtle defects in dynein function, whereas mutation in AAA4 produce no obvious defects. These results show that the four conserved dynein AAA domains have distinct functions in dynein's mechanochemical cycle.

Insulin-induced GLUT4 translocation involves protein kinase C-lambda-mediated functional coupling between Rab4 and the motor protein kinesin

Insulin stimulates glucose transport by promoting translocation of GLUT4 proteins from the perinuclear compartment to the cell surface. It has been previously suggested that the microtubule-associated motor protein kinesin, which transports cargo toward the plus end of microtubules, plays a role in translocating GLUT4 vesicles to the cell surface. In this study, we investigated the role of Rab4, a small GTPase-binding protein, and the motor protein KIF3 (kinesin II in mice) in insulin-induced GLUT4 exocytosis in 3T3-L1 adipocytes. Photoaffinity labeling of Rab4 with [gamma-(32)P]GTP-azidoanilide showed that insulin stimulated Rab4 GTP loading and that this insulin effect was inhibited by pretreatment with the phosphatidylinositol 3-kinase (PI3-kinase) inhibitor LY294002 or expression of dominant-negative protein kinase C-lambda (PKC-lambda). Consistent with previous reports, expression of dominant-negative Rab4 (N121I) decreased insulin-induced GLUT4 translocation by 45%. Microinjection of an anti-KIF3 antibody into 3T3-L1 adipocytes decreased insulin-induced GLUT4 exocytosis by 65% but had no effect on endocytosis. Coimmunoprecipitation experiments showed that Rab4, but not Rab5, physically associated with KIF3, and this was confirmed by showing in vitro association using glutathione S-transferase-Rab4. A microtubule capture assay demonstrated that insulin stimulation increased the activity for the binding of KIF3 to microtubules and that this activation was inhibited by pretreatment with the PI3-kinase inhibitor LY294002 or expression of dominant-negative PKC-lambda. Taken together, these data indicate that (i) insulin signaling stimulates Rab4 activity, the association of Rab4 with kinesin, and the interaction of KIF3 with microtubules and (ii) this process is mediated by insulin-induced PI3-kinase-dependent PKC-lambda activation and participates in GLUT4 exocytosis in 3T3-L1 adipocytes.

A complete inventory of fungal kinesins in representative filamentous ascomycetes

Complete inventories of kinesins from three pathogenic filamentous ascomycetes, Botryotinia fuckeliana, Cochliobolus heterostrophus, and Gibberella moniliformis, are described. These protein sequences were compared with those of the filamentous saprophyte, Neurospora crassa and the two yeasts Saccharomyces cerevisiae and Schizosaccharomyces pombe. Data mining and phylogenetic analysis of the motor domain yielded a constant set of 10 kinesins in the filamentous fungal species, compared with a smaller set in S. cerevisiae and S. pombe. The filamentous fungal kinesins fell into nine subfamilies when compared with well-characterized kinesins from other eukaryotes. A few putative kinesins (one in B. fuckeliana and two in C. heterostrophus) could not be defined as functional, due to unorthodox organization and lack of experimental data. The broad representation of filamentous fungal kinesins across most of the known subfamilies and the ease of gene manipulation make fungi ideal models for functional and evolutionary investigation of these proteins.

The molecular function of Ase1p: evidence for a MAP-dependent midzone-specific spindle matrix. Microtubule-associated proteins

The midzone is the domain of the mitotic spindle that maintains spindle bipolarity during anaphase and generates forces required for spindle elongation (anaphase B). Although there is a clear role for microtubule (MT) motor proteins at the spindle midzone, less is known about how microtubule-associated proteins (MAPs) contribute to midzone organization and function. Here, we report that budding yeast Ase1p is a member of a conserved family of midzone-specific MAPs. By size exclusion chromatography and velocity sedimentation, both Ase1p in extracts and purified Ase1p behaved as a homodimer. Ase1p bound and bundled MTs in vitro. By live cell microscopy, loss of Ase1p resulted in a specific defect: premature spindle disassembly in mid-anaphase. Furthermore, when overexpressed, Ase1p was sufficient to trigger spindle elongation in S phase-arrested cells. FRAP revealed that Ase1p has both a very slow rate of turnover within the midzone and limited lateral diffusion along spindle MTs. We propose that Ase1p functions as an MT cross-bridge that imparts matrix-like characteristics to the midzone. MT-dependent networks of spindle midzone MAPs may be one molecular basis for the postulated spindle matrix.

Orphan kinesin NOD lacks motile properties but does possess a microtubule-stimulated ATPase activity

NOD is a Drosophila chromosome-associated kinesin-like protein that does not fall into the chromokinesin subfamily. Although NOD lacks residues known to be critical for kinesin function, we show that microtubules activate the ATPase activity of NOD >2000-fold. Biochemical and genetic analysis of two genetically identified mutations of NOD (NOD(DTW) and NOD("DR2")) demonstrates that this allosteric activation is critical for the function of NOD in vivo. However, several lines of evidence indicate that this ATPase activity is not coupled to vectorial transport, including 1) NOD does not produce microtubule gliding; and 2) the substitution of a single amino acid in the Drosophila kinesin heavy chain with the analogous amino acid in NOD results in a drastic inhibition of motility. We suggest that the microtubule-activated ATPase activity of NOD provides transient attachments of chromosomes to microtubules rather than producing vectorial transport.

Eg5 is static in bipolar spindles relative to tubulin: evidence for a static spindle matrix

We used fluorescent speckle microscopy to probe the dynamics of the mitotic kinesin Eg5 in Xenopus extract spindles, and compared them to microtubule dynamics. We found significant populations of Eg5 that were static over several seconds while microtubules flux towards spindle poles. Eg5 dynamics are frozen by adenylimidodiphosphate. Bulk turnover experiments showed that Eg5 can exchange between the spindle and the extract with a half life of <55 s. Eg5 distribution in spindles was not perturbed by inhibition of its motor activity with monastrol, but was perturbed by inhibition of dynactin with p50 dynamitin. We interpret these data as revealing the existence of a static spindle matrix that promotes Eg5 targeting to spindles, and transient immobilization of Eg5 within spindles. We discuss alternative interpretations of the Eg5 dynamics we observe, ideas for the biochemical nature of a spindle matrix, and implications for Eg5 function.

Molecular analysis of kinetochore-microtubule attachment in budding yeast

The complex series of movements that mediates chromosome segregation during mitosis is dependent on the attachment of microtubules to kinetochores, DNA-protein complexes that assemble on centromeric DNA. We describe the use of live-cell imaging and chromatin immunoprecipitation in S. cerevisiae to identify ten kinetochore subunits, among which are yeast homologs of microtubule binding proteins in animal cells. By analyzing conditional mutations in several of these proteins, we show that they are required for the imposition of tension on paired sister kinetochores and for correct chromosome movement. The proteins include both molecular motors and microtubule associated proteins (MAPs), implying that motors and MAPs function together in binding chromosomes to spindle microtubules.

Regulation of molecular motor proteins

Motor proteins in the kinesin, dynein, and myosin superfamilies are tightly regulated to perform multiple functions in the cell requiring force generation. Although motor proteins within families are diverse in sequence and structure, there are general mechanisms by which they are regulated. We first discuss the regulation of the subset of kinesin family members for which such information exists, and then address general mechanisms of kinesin family regulation. We review what is known about the regulation of axonemal and cytoplasmic dyneins. Recent work on cytoplasmic dynein has revealed the existence of multiple isoforms for each dynein chain, making the study of dynein regulation more complicated than previously realized. Finally, we discuss the regulation of myosins known to be involved in membrane trafficking. Myosins and kinesins may be evolutionarily related, and there are common themes of regulation between these two classes of motors.

Probing spindle assembly mechanisms with monastrol, a small molecule inhibitor of the mitotic kinesin, Eg5

Monastrol, a cell-permeable small molecule inhibitor of the mitotic kinesin, Eg5, arrests cells in mitosis with monoastral spindles. Here, we use monastrol to probe mitotic mechanisms. We find that monastrol does not inhibit progression through S and G2 phases of the cell cycle or centrosome duplication. The mitotic arrest due to monastrol is also rapidly reversible. Chromosomes in monastrol-treated cells frequently have both sister kinetochores attached to microtubules extending to the center of the monoaster (syntelic orientation). Mitotic arrest-deficient protein 2 (Mad2) localizes to a subset of kinetochores, suggesting the activation of the spindle assembly checkpoint in these cells. Mad2 localizes to some kinetochores that have attached microtubules in monastrol-treated cells, indicating that kinetochore microtubule attachment alone may not satisfy the spindle assembly checkpoint. Monastrol also inhibits bipolar spindle formation in Xenopus egg extracts. However, it does not prevent the targeting of Eg5 to the monoastral spindles that form. Imaging bipolar spindles disassembling in the presence of monastrol allowed direct observations of outward directed forces in the spindle, orthogonal to the pole-to-pole axis. Monastrol is thus a useful tool to study mitotic processes, detection and correction of chromosome malorientation, and contributions of Eg5 to spindle assembly and maintenance.