Probing the active site of the hepatitis C virus serine protease by fluorescence resonance energy transfer

A compact synthetic pathway rewires cancer signaling to therapeutic effector release

An important goal in synthetic biology is to engineer biochemical pathways to address unsolved biomedical problems. One long-standing problem in molecular medicine is the specific identification and ablation of cancer cells. Here, we describe a method, named Rewiring of Aberrant Signaling to Effector Release (RASER), in which oncogenic ErbB receptor activity, instead of being targeted for inhibition as in existing treatments, is co-opted to trigger therapeutic programs. RASER integrates ErbB activity to specifically link oncogenic states to the execution of desired outputs. A complete mathematical model of RASER and modularity in design enable rational optimization and output programming. Using RASER, we induced apoptosis and CRISPR-Cas9-mediated transcription of endogenous genes specifically in ErbB-hyperactive cancer cells. Delivery of apoptotic RASER by adeno-associated virus selectively ablated ErbB-hyperactive cancer cells while sparing ErbB-normal cells. RASER thus provides a new strategy for oncogene-specific cancer detection and treatment.

Cellular Uptake and Localization of Polymyxins in Renal Tubular Cells Using Rationally Designed Fluorescent Probes

Polymyxins are cyclic lipopeptide antibiotics that serve as a last line of defense against Gram-negative bacterial superbugs. However, the extensive accumulation of polymyxins in renal tubular cells can lead to nephrotoxicity, which is the major dose-limiting factor in clinical use. In order to gain further insights into the mechanism of polymyxin-induced nephrotoxicity, we have rationally designed novel fluorescent polymyxin probes to examine the localization of polymyxins in rat renal tubular (NRK-52E) cells. Our design strategy focused on incorporating a dansyl fluorophore at the hydrophobic centers of the polymyxin core structure. To this end, four novel regioselectively labeled monodansylated polymyxin B probes (MIPS-9541, MIPS-9542, MIPS-9543, and MIPS-9544) were designed, synthesized, and screened for their antimicrobial activities and apoptotic effects against rat kidney proximal tubular cells. On the basis of the assessment of antimicrobial activities, cellular uptake, and apoptotic effects on renal tubular cells, incorporation of a dansyl fluorophore at either position 6 or 7 (MIPS-9543 and MIPS-9544, respectively) of the polymyxin core structure appears to be an appropriate strategy for generating representative fluorescent polymyxin probes to be utilized in intracellular imaging and mechanistic studies. Furthermore, confocal imaging experiments utilizing these probes showed evidence of partial colocalization of the polymyxins with both the endoplasmic reticulum and mitochondria in rat renal tubular cells. Our results highlight the value of these new fluorescent polymyxin probes and provide further insights into the mechanism of polymyxin-induced nephrotoxicity.

Combined X-ray, NMR, and kinetic analyses reveal uncommon binding characteristics of the hepatitis C virus NS3-NS4A protease inhibitor BI 201335

Hepatitis C virus infection, a major cause of liver disease worldwide, is curable, but currently approved therapies have suboptimal efficacy. Supplementing these therapies with direct-acting antiviral agents has the potential to considerably improve treatment prospects for hepatitis C virus-infected patients. The critical role played by the viral NS3 protease makes it an attractive target, and despite its shallow, solvent-exposed active site, several potent NS3 protease inhibitors are currently in the clinic. BI 201335, which is progressing through Phase IIb trials, contains a unique C-terminal carboxylic acid that binds noncovalently to the active site and a bromo-quinoline substitution on its proline residue that provides significant potency. In this work we have used stopped flow kinetics, x-ray crystallography, and NMR to characterize these distinctive features. Key findings include: slow association and dissociation rates within a single-step binding mechanism; the critical involvement of water molecules in acid binding; and protein side chain rearrangements, a bromine-oxygen halogen bond, and profound pK(a) changes within the catalytic triad associated with binding of the bromo-quinoline moiety.

Development of a cell-based hepatitis C virus infection fluorescent resonance energy transfer assay for high-throughput antiviral compound screening

A major obstacle in the treatment of chronic hepatitis C virus (HCV) infection has been the lack of effective, well-tolerated therapeutics. Notably, the recent development of the HCV cell culture infection system now allows not only for the study of the entire viral life cycle, but also for the screening of inhibitors against all aspects of HCV infection. However, in order to screen libraries of potential antiviral compounds, it is necessary to develop a highly reproducible, accurate assay for HCV infection adaptable for high-throughput screening (HTS) automation. Using an internally quenched 5-FAM/QXL 520 fluorescence resonance energy transfer (FRET) substrate containing the HCV NS3 peptide cleavage sequence, we report the development of a simple, mix-and-measure, homogenous, cell-based HCV infection assay amendable for HTS. This assay makes use of synchronized, nondividing human hepatoma-derived Huh7 cells, which support more-reproducible long-term HCV infection and can be readily scaled down to a 96-well-plate format. We demonstrate that this stable cell culture method eliminates common problems associated with standard cell-based HTS, such as cell culture variability, poor reproducibility, and low signal intensity. Importantly, this HCV FRET assay not only can identify inhibitors that act throughout the viral life cycle as effectively as more-standard HCV assays, such as real-time quantitative PCR and Western blot analysis, but also exhibits a high degree of accuracy with limited signal variation (i.e., Z' > or = 0.6), providing the basis for a robust HTS campaign for screening compound libraries and identifying novel HCV antivirals.

Detection and characterization of two ATP-dependent conformational changes in proteolytically inactive Escherichia coli Lon mutants by stopped flow kinetic techniques

Lon is an ATP dependent serine protease responsible for degrading denatured, oxidatively damaged and certain regulatory proteins in the cell. In this study we exploited the fluorescence properties of a dansylated peptide substrate (S4) and the intrinsic Trp residues in Lon to monitor peptide interacting with the enzyme. We generated two proteolytically inactive Lon mutants, S679A and S679W, where the active site serine is mutated to an Ala and Trp residue, respectively. Stopped-flow fluorescence spectroscopy was used to identify key enzyme intermediates generated along the reaction pathway prior to peptide hydrolysis. A two-step peptide binding event is detected in both mutants, where a conformational change occurs after a rapid equilibrium peptide binding step. The Kd for the initial peptide binding step determined by kinetic and equilibrium binding techniques is approximately 164 micromolar and 38 micromolar, respectively. The rate constants for the conformational change detected in the S679A and S679W Lon mutants are 0.74 +/- 0.10 s(-1) and 0.57 +/- 0.10 s(-1), respectively. These values are comparable to the lag rate constant determined for peptide hydrolysis (klag approximately 1 s(-1)) [Vineyard, D., et al. (2005) Biochemistry 45, 4602-4610]. Replacement of the active site Ser with Trp (S679W) allows for the detection of an ATP-dependent conformational change within the proteolytic site. The rate constant for this conformational change is 7.6 +/- 1.0 s(-1), and is essentially identical to the burst rate constant determined for ATP hydrolysis under comparable reaction conditions. Collectively, these kinetic data support a mechanism by which the binding of ATP to an allosteric site on Lon activates the proteolytic site. In this model, the energy derived from the binding of ATP minimally supports peptide cleavage by allowing peptide substrate access to the proteolytic site. However, the kinetics of peptide cleavage are enhanced by the hydrolysis of ATP.

LED fluorescence spectroscopy for direct determination of monoamine oxidase B inactivation

In this work, we report an alternative assay for the determination of the inhibitory effect on monoamine oxidase B (MAO-B) activity of probe compounds. Enzyme MAO-B exhibits fluorescence emissions when it is excited at 412 nm. Using an inexpensive blue LED-like excitation source, we measured the quenching of fluorescence intensity of MAO-B enzyme during the reaction with inhibitors. The applicability of the procedure is demonstrated by assays with l-deprenyl and berberine as inhibitors through the use of fluorescence studies. The IC(50) values of l-deprenyl and berberine were 0.04 and 90 microM, respectively. The K(I) values were 0.020 and 47 microM for l-deprenyl and berberine, respectively. These IC(50) and K(I) values were similar to the values obtained with a standard method. These results demonstrate the feasibility of this method as an alternative to follow the inhibitory effect on MAO-B.

A method for connecting solution-phase enzyme activity assays with immobilized format analysis by mass spectrometry

This paper reports an enzyme activity assay that combines the assets of both homogeneous and solid-phase formats. In this method, enzyme reactions are carried out in solution using substrates that are tagged with an immobilization reagent that allows the substrates to be selectively immobilized to self-assembled monolayers (SAMs), for direct analysis by matrix assisted laser desorption ionization time-of-flight (MALDI-TOF) mass spectrometry (MS). As a model enzyme reaction, this work examined the transfer of a methyl group from S-adenosyl-l-methionine (AdoMet) to an arginine side chain of a peptide substrate by the enzyme protein arginine methyltransferase 1 (RMT1). A cysteine-terminated peptide substrate was methylated by RMT1 in solution and then applied to a maleimide-presenting SAM to give selective immobilization of the peptide. Time-dependent analysis of methylation using MALDI-TOFMS clearly showed that both the presence and relative amount of the two reaction products-the mono- and dimethylated peptides-can be conveniently evaluated. This assay strategy is rapid, takes advantage of solution-phase assay conditions, avoids the use of labels and complicated purification steps, and is applicable to multianalyte analyses.

Oligomerization-dependent changes in the thermodynamic properties of the TPR-MET receptor tyrosine kinase

Although oligomerization of receptor tyrosine kinases (RTKs) is necessary for receptor activation and signaling, a quantitative understanding of how oligomerization mediates these critical processes does not exist. We present a comparative thermodynamic analysis of functionally active dimeric and functionally inactive monomeric soluble analogues of the c-MET RTK, which clearly reveal that oligomerization regulates the binding affinity and binding kinetics of the kinase toward ATP and tyrosine-containing peptide substrates. Thermodynamic binding data for oligomeric c-MET were obtained from the dimeric TPR-MET oncoprotein, a functionally active fusion derivative of the c-MET RTK. This naturally occurring oncoprotein contains the cytoplasmic domain of c-MET fused to a coiled coil dimerization domain from the nuclear pore complex. Comparative data were obtained from a soluble monomeric kinase compromising the c-MET cytoplasmic domain (cytoMET). Significantly, under equilibrium binding conditions, the oligomeric phosphorylated kinase showed a significantly lower dissociation constant (K(d,dimer) = 11 microM) for a tyrosine-containing peptide derived from the C-terminal tail of the c-MET RTK when compared to the phosphorylated monomeric kinase cytoMET (K(d,monomer) = 140 microM). Surprisingly, equilibrium dissociation constants measured for the kinase and ATP were independent of the oligomerization state of the kinase (approximately 10 microM). Stopped-flow analysis of peptide substrate binding showed that the association rate constants (k(2)) differed 2-fold and dissociation rate constants (k(-2)) differed 10-fold when phosphorylated TPR-MET was compared to phosphorylated cytoMET. ATP binding abrogated the differences in k(2) rates observed between the two oligomeric states of the c-MET cytoplasmic domain. These results clearly imply that oligomerization induces important thermodynamic and conformational changes in the substrate binding regions of the c-MET protein and provide quantitative mechanistic insights into the necessary role of oligomerization in RTK activation.

Structure-based design of inhibitors of NS3 serine protease of hepatitis C virus

We have designed small focused combinatorial library of hexapeptide inhibitors of NS3 serine protease of the hepatitis C virus (HCV) by structure-based molecular design complemented by combinatorial optimisation of the individual residues. Rational residue substitutions were guided by the structure and properties of the binding pockets of the enzyme's active site. The inhibitors were derived from peptides known to inhibit the NS3 serine protease by using unusual amino acids and alpha-ketocysteine or difluoroaminobutyric acid, which are known to bind to the S1 pocket of the catalytic site. Inhibition constants (Ki) of the designed library of inhibitors were predicted from a QSAR model that correlated experimental Ki of known peptidic inhibitors of NS3 with the enthalpies of enzyme-inhibitor interaction computed via molecular mechanics and the solvent effect contribution to the binding affinity derived from the continuum model of solvation. The library of the optimised inhibitors contains promising drug candidates-water-soluble anionic hexapeptides with predicted Ki* in the picomolar range.

A scintillation proximity active site binding assay for the hepatitis C virus serine protease

A binding assay suitable for the identification of active site-directed inhibitors of the hepatitis C virus serine protease NS3 was developed. A C-terminal extension of 13 residues that is specifically recognized by the Escherichia coli biotin holoenzyme synthetase (Bir A) was fused to a truncated NS3 protease domain, allowing the efficient production of in vivo biotinylated protease. This enzyme was purified and shown to have the same properties as its wild-type counterpart concerning substrate binding and turnover, interaction with a cofactor peptide, and inhibition by three different classes of inhibitors. Immobilization of the biotinylated protease, using streptavidin-coated scintillation proximity beads, allowed detection, by scintillation counting, of its interaction with a tritiated active site ligand spanning the whole substrate binding site of the protease from P6 to P4('). Immobilization did not measurably affect accessibility to either the active site or the cofactor binding site of the protease as judged by the unchanged affinities for a cofactor peptide and for two active site binders. Using the displacement of the radioligand as readout, we were able to set up a rapid, robust, and fully automated assay, suitable for the selective identification of novel active site ligands of the NS3 protease.

Prime site binding inhibitors of a serine protease: NS3/4A of hepatitis C virus

Serine proteases are the most studied class of proteolytic enzymes and a primary target for drug discovery. Despite the large number of inhibitors developed so far, very few make contact with the prime site of the enzyme, which constitutes an almost untapped opportunity for drug design. In the course of our studies on the serine protease NS3/4A of hepatitis C virus (HCV), we found that this enzyme is an excellent example of both the opportunities and the challenges of such design. We had previously reported on two classes of peptide inhibitors of the enzyme: (a) product inhibitors, which include the P(6)-P(1) region of the substrate and derive much of their binding energy from binding of their C-terminal carboxylate in the active site, and (b) decapeptide inhibitors, which span the S(6)-S(4)' subsites of the enzyme, whose P(2)'-P(4)' tripeptide fragment crucially contributes to potency. Here we report on further work, which combined the key binding elements of the two series and led to the development of inhibitors binding exclusively to the prime site of NS3/4A. We prepared a small combinatorial library of tripeptides, capped with a variety of constrained and unconstrained diacids. The SAR was derived from multiple analogues of the initial micromolar lead. Binding of the inhibitor(s) to the enzyme was further characterized by circular dichroism, site-directed mutagenesis, a probe displacement assay, and NMR to unequivocally prove that, according to our design, the bound inhibitor(s) occupies (occupy) the S' subsite and the active site of the protease. In addition, on the basis of the information collected, the tripeptide series was evolved toward reduced peptide character, reduced molecular weight, and higher potency. Beyond their interest as HCV antivirals, these compounds represent the first example of prime site inhibitors of a serine protease. We further suggest that the design of an inhibitor with an analogous binding mode may be possible for other serine proteases.

Superficial disposition of the N-terminal region of the surfactant protein SP-C and the absence of specific SP-B-SP-C interactions in phospholipid bilayers

A dansylated form of porcine surfactant-associated protein C (Dns-SP-C), bearing a single dansyl group at its N-terminal end, has been used to characterize the lipid-protein and protein-protein interactions of SP-C reconstituted in phospholipid bilayers, using fluorescence spectroscopy. The fluorescence emission spectrum of Dns-SP-C in phospholipid bilayers is similar to the spectrum of dansyl-phosphatidylethanolamine, and indicates that the N-terminal end of the protein is located at the surface of the membranes and is exposed to the aqueous environment. In membranes containing phosphatidylglycerol (PG), the fluorescence of Dns-SP-C shows a 3-fold increase with respect to the fluorescence of phosphatidylcholine (PC), suggesting that electrostatic lipid-protein interactions induce important effects on the structure and disposition of the N-terminal segment of the protein in these membranes. This effect saturates above 20% PG molar content in the bilayers. The parameters for the interaction of Dns-SP-C with PC or PG have been estimated from the changes induced in the fluorescence emission spectrum of the protein. The protein had similar K(d) values for its interaction with the different phospholipids tested, of the order of a few micromolar. Cooling of Dns-SP-C-containing dipalmitoyl PC bilayers to temperatures below the phase transition of the phospholipid produced a progressive blue-shift of the fluorescence emission of the protein. This effect is interpreted as a consequence of the transfer of the N-terminal segment of the protein into less polar environments that originate during protein lateral segregation. This suggests that conformation and interactions of the N-terminal segment of SP-C could be important in regulating the lateral distribution of the protein in surfactant bilayers and monolayers. Potential SP-B-SP-C interactions have been explored by analysing fluorescence resonance energy transfer (RET) from the single tryptophan in porcine SP-B to dansyl in Dns-SP-C. RET has been detected in samples where native SP-B and Dns-SP-C were concurrently reconstituted in PC or PG bilayers. However, the analysis of the dependence of RET on the protein density excluded specific SP-B-Dns-SP-C associations.

Role of charged residues in the catalytic mechanism of hepatitis C virus NS3 protease: electrostatic precollision guidance and transition-state stabilization

Maturational cleavage of the hepatitis C virus polyprotein involves the viral chymotrypsin-like serine protease NS3. The substrate binding site of this enzyme is unusually flat and featureless. We here show that NS3 has a highly asymmetric charge distribution that is characterized by strong positive potentials in the vicinity of its active site and in the S5/S6 region. Using electrostatic potential calculations, we identified determinants of this positive potential, and the role of six different residues was explored by site-directed mutagenesis. Mutation of residues in the vicinity of the active site led to changes in k(cat) values of a peptide substrate indicating that basic amino acids play a role in the stabilization of the transition state. Charge neutralization in the S5/S6 region increased the K(m) values of peptide substrates in a manner that depended on the presence of negatively charged residues in the P5 and P6 positions. K(i) values of hexapeptide acids spanning P6-P1 (product inhibitors) were affected by charge neutralization in both the active site region and the S5/S6 region. Pre-steady-state kinetic data showed that the electrostatic surface potential is used by this enzyme to enhance collision rates between peptidic ligands and the active site. Calculations of the interaction energies of protease-substrate or protease-inhibitor complexes showed that electrostatic interaction energies oppose the formation of a tightly bound complex due to an unfavorable change in the desolvation energy. We propose that desolvation costs are minimized by avoiding the formation of individual ion pair interactions through the use of clusters of positively charged residues in the generation of local electrostatic potentials.

A personal account of the role of peptide research in drug discovery: the case of hepatitis C

Although peptides themselves are not usually the end products of a drug discovery effort, peptide research often plays a key role in many aspects of this process. This will be illustrated by reviewing the experience of peptide research carried out at IRBM in the course of our study of hepatitis C virus (HCV). The target of our work is the NS3/4A protease, which is essential for maturation of the viral polyprotein. After a thorough examination of its substrate specificity we fine-tuned several substrate-derived peptides for enzymology studies, high-throughput screening and as fluorescent probes for secondary binding assays. In the course of these studies we made the key observation: that the protease is inhibited by its own cleavage products. Single analog and combinatorial optimization then derived potent peptide inhibitors. The crucial role of the NS4A cofactor was also addressed. NS4A is a small transmembrane protein, whose central domain is the minimal region sufficient for enzyme activation. Structural studies were performed with a peptide corresponding to the minimal activation domain, with a series of product inhibitors and with both. We found that NS3/4A is an induced fit enzyme, requiring both the cofactor and the substrate to acquire its bioactive conformation; this explained some puzzling results of 'serine-trap' type inhibitors. A more complete study on NS3 activation, however, requires the availability of the full-length NS4A protein. This was prepared by native chemical ligation, after sequence engineering to enhance its solubility; structural studies are in progress. Current work is focused on the P' region of the substrate, which, at variance with the P region, is not used for ground state binding to the enzyme and might give rise to inhibitors showing novel interactions with the enzyme.