Insights into the rotary catalytic mechanism of F0F1 ATP synthase from the cross-linking of subunits b and c in the Escherichia coli enzyme

ATP Synthesis by Oxidative Phosphorylation

The F1F0-ATP synthase (EC 3.6.1.34) is a remarkable enzyme that functions as a rotary motor. It is found in the inner membranes of Escherichia coli and is responsible for the synthesis of ATP in response to an electrochemical proton gradient. Under some conditions, the enzyme functions reversibly and uses the energy of ATP hydrolysis to generate the gradient. The ATP synthase is composed of eight different polypeptide subunits in a stoichiometry of α3β3γδεab2c10. Traditionally they were divided into two physically separable units: an F1 that catalyzes ATP hydrolysis (α3β3γδε) and a membrane-bound F0 sector that transports protons (ab2c10). In terms of rotary function, the subunits can be divided into rotor subunits (γεc10) and stator subunits (α3β3δab2). The stator subunits include six nucleotide binding sites, three catalytic and three noncatalytic, formed primarily by the β and α subunits, respectively. The stator also includes a peripheral stalk composed of δ and b subunits, and part of the proton channel in subunit a. Among the rotor subunits, the c subunits form a ring in the membrane, and interact with subunit a to form the proton channel. Subunits γ and ε bind to the c-ring subunits, and also communicate with the catalytic sites through interactions with α and β subunits. The eight subunits are expressed from a single operon, and posttranscriptional processing and translational regulation ensure that the polypeptides are made at the proper stoichiometry. Recent studies, including those of other species, have elucidated many structural and rotary properties of this enzyme.

Escherichia coli F1Fo-ATP synthase with a b/δ fusion protein allows analysis of the function of the individual b subunits

The "stator stalk" of F1Fo-ATP synthase is essential for rotational catalysis as it connects the nonrotating portions of the enzyme. In Escherichia coli, the stator stalk consists of two (identical) b subunits and the δ subunit. In mycobacteria, one of the b subunits and the δ subunit are replaced by a b/δ fusion protein; the remaining b subunit is of the shorter b' type. In the present study, it is shown that it is possible to generate a functional E. coli ATP synthase containing a b/δ fusion protein. This construct allowed the analysis of the roles of the individual b subunits. The full-length b subunit (which in this case is covalently linked to δ in the fusion protein) is responsible for connecting the stalk to the catalytic F1 subcomplex. It is not required for interaction with the membrane-embedded Fo subcomplex, as its transmembrane helix can be removed. Attachment to Fo is the function of the other b subunit which in turn has only a minor (if any at all) role in binding to δ. Also in E. coli the second b subunit can be shortened to a b' type.

Subunit δ is the key player for assembly of the H(+)-translocating unit of Escherichia coli F(O)F1 ATP synthase

The ATP synthase (F(O)F1) of Escherichia coli couples the translocation of protons across the cytoplasmic membrane to the synthesis or hydrolysis of ATP. This nanomotor is composed of the rotor c10γε and the stator ab2α3β3δ. To study the assembly of this multimeric enzyme complex consisting of membrane-integral as well as peripheral hydrophilic subunits, we combined nearest neighbor analyses by intermolecular disulfide bond formation or purification of partially assembled F(O)F1 complexes by affinity chromatography with the use of mutants synthesizing different sets of F(O)F1 subunits. Together with a time-delayed in vivo assembly system, the results demonstrate that F(O)F1 is assembled in a modular way via subcomplexes, thereby preventing the formation of a functional H(+)-translocating unit as intermediate product. Surprisingly, during the biogenesis of F(O)F1, F1 subunit δ is the key player in generating stable F(O). Subunit δ serves as clamp between ab2 and c10α3β3γε and guarantees that the open H(+) channel is concomitantly assembled within coupled F(O)F1 to maintain the low membrane proton permeability essential for viability, a general prerequisite for the assembly of multimeric H(+)-translocating enzymes.

Individual interactions of the b subunits within the stator of the Escherichia coli ATP synthase

FOF1 ATP synthases are rotary nanomotors that couple proton translocation across biological membranes to the synthesis/hydrolysis of ATP. During catalysis, the peripheral stalk, composed of two b subunits and subunit δ in Escherichia coli, counteracts the torque generated by the rotation of the central stalk. Here we characterize individual interactions of the b subunits within the stator by use of monoclonal antibodies and nearest neighbor analyses via intersubunit disulfide bond formation. Antibody binding studies revealed that the C-terminal region of one of the two b subunits is principally involved in the binding of subunit δ, whereas the other one is accessible to antibody binding without impact on the function of FOF1. Individually substituted cysteine pairs suitable for disulfide cross-linking between the b subunits and the other stator subunits (b-α, b-β, b-δ, and b-a) were screened and combined with each other to discriminate between the two b subunits (i.e. bI and bII). The results show the b dimer to be located at a non-catalytic α/β cleft, with bI close to subunit α, whereas bII is proximal to subunit β. Furthermore, bI can be linked to subunit δ as well as to subunit a. Among the subcomplexes formed were a-bI-α, bII-β, α-bI-bII-β, and a-bI-δ. Taken together, the data obtained define the different positions of the two b subunits at a non-catalytic interface and imply that each b subunit has a different role in generating stability within the stator. We suggest that bI is functionally related to the single b subunit present in mitochondrial ATP synthase.

Interactions between subunits a and b in the rotary ATP synthase as determined by cross-linking

The interaction of the membrane traversing stator subunits a and b of the rotary ATP synthase was probed by substitution of a single Cys into each subunit with subsequent Cu(2+) catalyzed cross-linking. Extensive interaction between the transmembrane (TM) region of one b subunit and TM2 of subunit a was indicated by cross-linking with 6 Cys pairs introduced into these regions. Additional disulfide cross-linking was observed between the N-terminus of subunit b and the periplasmic loop connecting TM4 and TM5 of subunit a. Finally, benzophenone-4-maleimide derivatized Cys in the 2-3 periplasmic loop of subunit a were shown to cross-link with the periplasmic N-terminal region of subunit b. These experiments help to define the juxtaposition of subunits b and a in the ATP synthase.

Twisting and subunit rotation in single F(O)(F1)-ATP synthase

F(O)F(1)-ATP synthases are ubiquitous proton- or ion-powered membrane enzymes providing ATP for all kinds of cellular processes. The mechanochemistry of catalysis is driven by two rotary nanomotors coupled within the enzyme. Their different step sizes have been observed by single-molecule microscopy including videomicroscopy of fluctuating nanobeads attached to single enzymes and single-molecule Förster resonance energy transfer. Here we review recent developments of approaches to monitor the step size of subunit rotation and the transient elastic energy storage mechanism in single F(O)F(1)-ATP synthases.

Structural study on the architecture of the bacterial ATP synthase Fo motor

We purified the F(o) complex from the Ilyobacter tartaricus Na(+)-translocating F(1)F(o)-ATP synthase and performed a biochemical and structural study. Laser-induced liquid bead ion desorption MS analysis demonstrates that all three subunits of the isolated F(o) complex were present and in native stoichiometry (ab(2)c(11)). Cryoelectron microscopy of 2D crystals yielded a projection map at a resolution of 7.0 Å showing electron densities from the c(11) rotor ring and up to seven adjacent helices. A bundle of four helices belongs to the stator a-subunit and is in contact with c(11). A fifth helix adjacent to the four-helix bundle interacts very closely with a c-subunit helix, which slightly shifts its position toward the ring center. Atomic force microscopy confirms the presence of the F(o) stator, and a height profile reveals that it protrudes less from the membrane than c(11). The data limit the dimensions of the subunit a/c-ring interface: Three helices from the stator region are in contact with three c(11) helices. The location and distances of the stator helices impose spatial restrictions on the bacterial F(o) complex.

Structural divergence of the rotary ATPases

The rotary ATPase family of membrane protein complexes may have only three members, but each one plays a fundamental role in biological energy conversion. The F1Fo-ATPase (F-ATPase) couples ATP synthesis to the electrochemical membrane potential in bacteria, mitochondria and chloroplasts, while the vacuolar H+-ATPase (V-ATPase) operates as an ATP-driven proton pump in eukaryotic membranes. In different species of archaea and bacteria, the A1Ao-ATPase (A-ATPase) can function as either an ATP synthase or an ion pump. All three of these multi-subunit complexes are rotary molecular motors, sharing a fundamentally similar mechanism in which rotational movement drives the energy conversion process. By analogy to macroscopic systems, individual subunits can be assigned to rotor, axle or stator functions. Recently, three-dimensional reconstructions from electron microscopy and single particle image processing have led to a significant step forward in understanding of the overall architecture of all three forms of these complexes and have allowed the organisation of subunits within the rotor and stator parts of the motors to be more clearly mapped out. This review describes the emerging consensus regarding the organisation of the rotor and stator components of V-, A- and F-ATPases, examining core similarities that point to a common evolutionary origin, and highlighting key differences. In particular, it discusses how newly revealed variation in the complexity of the inter-domain connections may impact on the mechanics and regulation of these molecular machines.

Structure of the c14 rotor ring of the proton translocating chloroplast ATP synthase

The structure of the membrane integral rotor ring of the proton translocating F(1)F(0) ATP synthase from spinach chloroplasts was determined to 3.8 A resolution by x-ray crystallography. The rotor ring consists of 14 identical protomers that are symmetrically arranged around a central pore. Comparisons with the c(11) rotor ring of the sodium translocating ATPase from Ilyobacter tartaricus show that the conserved carboxylates involved in proton or sodium transport, respectively, are 10.6-10.8 A apart in both c ring rotors. This finding suggests that both ATPases have the same gear distance despite their different stoichiometries. The putative proton-binding site at the conserved carboxylate Glu(61) in the chloroplast ATP synthase differs from the sodium-binding site in Ilyobacter. Residues adjacent to the conserved carboxylate show increased hydrophobicity and reduced hydrogen bonding. The crystal structure reflects the protonated form of the chloroplast c ring rotor. We propose that upon deprotonation, the conformation of Glu(61) is changed to another rotamer and becomes fully exposed to the periphery of the ring. Reprotonation of Glu(61) by a conserved arginine in the adjacent a subunit returns the carboxylate to its initial conformation.

The oligomeric subunit C rotor in the fo sector of ATP synthase: unresolved questions in our understanding of function

We have proposed a model for the oligomeric c-rotor of the F(o) sector of ATP synthase and its interaction with subunit a during H+-transport driven rotation. The model is based upon the solution structure of monomeric subunit c, determined by NMR, and an extensive series of cross-linking distance constraints between c subunits and between subunits c and a. To explain the complete set of cross-linking data, we have suggested that the second transmembrane helix rotates during its interaction with subunit a in the course of the H+-translocation cycle. The H+-transport coupled rotation of this helix is proposed to drive the stepwise movement of the c-oligomeric rotor. The model is testable and provides a useful framework for addressing questions raised by other experiments.

A bi-site mechanism for Escherichia coli F1-ATPase accounts for the observed positive catalytic cooperativity

Nucleotide binding to nucleotide-depleted F(1)-ATPase from Escherichia coli (EcF(1)) during MgATP hydrolysis in the presence of excess epsilon subunit has been studied using a combination of centrifugal filtration and column-centrifugation methods. The results show that nucleotide-binding properties of catalytic sites on EcF(1) are affected by the state of occupancy of noncatalytic sites. The ATP-concentration dependence of catalytic-site occupancy during MgATP hydrolysis demonstrates that a bi-site mechanism is responsible for the positive catalytic cooperativity observed during multi-site catalysis by EcF(1). The results suggest that a bi-site mechanism is a general feature of F(1) catalysis.

Unique rotary ATP synthase and its biological diversity

F1F0 ATP synthases convert energy stored in an electrochemical gradient of H+ or Na+ across the membrane into mechanical rotation, which is subsequently converted into the chemical bond energy of ATP. The majority of cellular ATP is produced by the ATP synthase in organisms throughout the biological kingdom and therefore under diverse environmental conditions. The ATP synthase of each particular cell is confronted with specific challenges, imposed by the specific environment, and thus by necessity must adapt to these conditions for optimal operation. Examples of these adaptations include diverse mechanisms for regulating the ATP hydrolysis activity of the enzyme, the utilization of different coupling ions with distinct ion binding characteristics, different ion-to-ATP ratios reflected by variations in the size of the rotor c ring, the mode of ion delivery to the binding sites, and the different contributions of the electrical and chemical gradients to the driving force.

The thermodynamic H+/ATP ratios of the H+-ATPsynthases from chloroplasts and Escherichia coli

The H(+)/ATP ratio is an important parameter for the energy balance of all cells and for the coupling mechanism between proton transport and ATP synthesis. A straightforward interpretation of rotational catalysis predicts that the H(+)/ATP coincides with the ratio of the c-subunits to beta-subunits, implying that, for the chloroplast and Escherichia coli ATPsynthases, numbers of 4.7 and 3.3 are expected. Here, the energetics described by the chemiosmotic theory was used to determine the H(+)/ATP ratio for the two enzymes. The isolated complexes were reconstituted into liposomes, and parallel measurements were performed under identical conditions. The internal phase of the liposomes was equilibrated with the acidic medium during reconstitution, allowing to measure the internal pH with a glass electrode. An acid-base transition was carried out and the initial rates of ATP synthesis or ATP hydrolysis were measured with luciferin/luciferase as a function of DeltapH at constant Q = [ATP]/([ADP][P(i)]). From the shift of the equilibrium DeltapH as a function of Q the standard Gibbs free energy for phosphorylation, DeltaG(p)(0)'; and the H(+)/ATP ratio were determined. It resulted DeltaG(p)(0)' = 38 +/- 3 kJ.mol(-1) and H(+)/ATP = 4.0 +/- 0.2 for the chloroplast and H(+)/ATP = 4.0 +/- 0.3 for the E. coli enzyme, indicating that the thermodynamic H(+)/ATP ratio is the same for both enzymes and that it is different from the subunit stoichiometric ratio.

The b (arg36) contributes to efficient coupling in F(1)F (O) ATP synthase in Escherichia coli

In Escherichia coli, the F(1)F(O) ATP synthase b subunits house a conserved arginine in the tether domain at position 36 where the subunit emerges from the membrane. Previous experiments showed that substitution of isoleucine or glutamate result in a loss of enzyme activity. Double mutants have been constructed in an attempt to achieve an intragenic suppressor of the b (arg36-->ile) and the b (arg36-->glu) mutations. The b (arg36-->ile) mutation could not be suppressed. In contrast, the phenotypic defect resulting from the b (arg36-->glu) mutation was largely suppressed in the b (arg36-->glu,glu39-->arg) double mutant. E. coli expressing the b (arg36-->glu,glu39-->arg) subunit grew well on succinate-based medium. F(1)F(O) ATP synthase complexes were more efficiently assembled and ATP driven proton pumping activity was improved. The evidence suggests that efficient coupling in F(1)F(O) ATP synthase is dependent upon a basic amino acid located at the base of the peripheral stalk.

Interaction of transmembrane helices in ATP synthase subunit a in solution as revealed by spin label difference NMR

Subunit a in the membrane traversing F0 sector of Escherichia coli ATP synthase is known to fold with five transmembrane helices (TMHs) with residue 218 in TMH IV packing close to residue 248 in TMH V. In this study, we have introduced a spin label probe at Cys residues substituted at positions 222 or 223 and measured the effects on the Trp epsilon NH indole NMR signals of the seven Trp residues in the protein. The protein was purified and NMR experiments were carried out in a chloroform-methanol-H2O (4:4:1) solvent mixture. The spin label at positions 222 or 223 proved to broaden the signals of W231, W232, W235 and W241 located at the periplasmic ends of TMH IV and TMH V and the connecting loop between these helices. The broadening of W241 would require that the loop residues fold back on themselves in a hairpin-like structure much like it is predicted to fold in the native membrane. Placement of the spin label probe at several other positions also proved to have broadening effects on some of these Trp residues and provided additional constraints on folding of TMH IV and TMH V. The effects of the 223 probes on backbone amide resonances of subunit a were also measured by an HNCO experiment and the results are consistent with the two helices folding back on themselves in this solvent mixture. When Cys and Trp were substituted at residues 206 and 254 at the cytoplasmic ends of TMHs IV and V respectively, the W254 resonance was not broadened by the spin label at position 206. We conclude that the helices fold back on themselves in this solvent system and then pack at an angle such that the cytoplasmic ends of the polypeptide backbone are significantly displaced from each other.

Solvation of Transmembrane Proteins by Isotropic Membrane Mimetics: A Molecular Dynamics Study

Mixtures of organic solvents are often used as membrane mimetics in structure determination of transmembrane proteins by solution NMR; however, the mechanism through which these isotropic solvents mimic the anisotropic environment of cell membranes is not known. Here, we use molecular dynamics simulations to study the solvation thermodynamics of the c-subunit of Escherichia coli F1F0 ATP synthase in membrane mimetic mixtures of methanol, chloroform, and water with varying fractions of components as well as in lipid bilayers. We show that the protein induces a local phase separation of the solvent components into hydrophobic and hydrophilic layers, which provides the anisotropic solvation environment to stabilize the amphiphilic peptide. The extent of this effect varies with solvent composition and is most pronounced in the ternary methanol-chloroform-water mixtures. Analysis of the solvent structure, including the local mole fraction, density profiles, and pair distribution functions, reveals considerable variation among solvent mixtures in the solvation environment surrounding the hydrophobic transmembrane region of the protein. Hydrogen bond analysis indicates that this is primarily driven by the hydrogen-bonding propensity of the essential Asp(61) residue. The impact of the latter on the conformational stability of the solvated protein is discussed. Comparison with the simulations in explicit all-atom models of lipid bilayer indicates a higher flexibility and reduced structural integrity of the membrane mimetic solvated c-subunit. This was particularly true for the deprotonated form of the protein and found to be linked to solvent stabilization of the charged Asp(61).

Aqueous access pathways in ATP synthase subunit a. Reactivity of cysteine substituted into transmembrane helices 1, 3, and 5

Subunit a is thought to play a key role in H+ transport-driven rotation of the subunit c ring in Escherichia coli F1F0 ATP synthase. In the membrane-traversing F0 sector of the enzyme, H+ binding and release occurs at Asp-61 in the middle of the second transmembrane helix (TMH) of subunit c. Protons are thought to reach Asp-61 via aqueous channels formed at least in part by one or more of the five TMHs of subunit a. Aqueous access to surfaces of TMHs 2, 4, and 5 was previously suggested based upon the chemical reactivity of cysteine residues substituted into these helices. Here we have substituted Cys into TMH1 and TMH3 and extended the substitutions in TMH5 to the cytoplasmic surface. One region of TMH3 proved to be moderately Ag+-sensitive and may connect with the Ag+-sensitive region found previously on the periplasmic side of TMH2. A single Cys substitution in TMH1 proved to be both N-ethylmaleimide (NEM)-sensitive and Ag+-sensitive and suggests a possible packing interaction of TMH1 with TMH2 and TMH3. New Ag+- and NEM-sensitive residues were found at the cytoplasmic end of TMH5 and suggest a possible connection of this region to the NEM- and Ag+-sensitive region of TMH4 described previously. From the now complete pattern of TMH residue reactivity, we conclude that aqueous access from the periplasmic side of F0 to cAsp-61 at the center of the membrane is likely to be mediated by residues of TMHs 2, 3, 4, and 5 at the center of a four-helix bundle. Further, aqueous access between cAsp-61 and the cytoplasmic surface is likely to be mediated by residues in TMH4 and TMH5 at the exterior of the four-helix bundle that are in contact with the c-ring.

Cross-linking between helices within subunit a of Escherichia coli ATP synthase defines the transmembrane packing of a four-helix bundle

Subunit a of F(1)F(0) ATP synthase is required in the H(+) transport driven rotation of the c-ring of F(0), the rotation of which is coupled to ATP synthesis in F(1). The three-dimensional structure of subunit a is unknown. In this study, Cys substitutions were introduced into two different transmembrane helices (TMHs) of subunit a, and the proximity of the thiol side chains was tested via attempted oxidative cross-linking to form the disulfide bond. Pairs of Cys substitutions were made in TMHs 2/3, 2/4, 2/5, 3/4, 3/5, and 4/5. Cu(+2)-catalyzed oxidation led to cross-link formation between Cys pairs L120C(TMH2) and S144C(TMH3), L120C(TMH2) and G218C(TMH4), L120C(TMH2) and H245C(TMH5), L120C(TMH2) and I246C(TMH5), N148C(TMH3) and E219C(TMH4), N148C(TMH3) and H245C(TMH5), and G218C(TMH4) and I248C(TMH5). Iodine, but not Cu(+2), was found to catalyze cross-link formation between D119C(TMH2) and G218C(TMH4). The results suggest that TMHs 2, 3, 4, and 5 form a four-helix bundle with one set of key functional residues in TMH4 (Ser-206, Arg-210, and Asn-214) located at the periphery facing subunit c. Other key residues in TMHs 2, 4, and 5, which were concluded previously to compose a possible aqueous access pathway from the periplasm, were found to locate to the inside of the four-helix bundle.

Application of rigid body mechanics to theoretical description of rotation within F0F1-ATP synthase

ATP synthase catalyses the formation of ATP from ADP and P(i) and is powered by the diffusion of protons throughout membranes down the proton electrochemical gradient. The protein consists of a water-soluble F(1) and a transmembrane F(0) proton transporter part. It was previously shown that the ring of membrane subunits rotates past a fixed subunit during catalytic cycle of the enzyme. However, many parameters of this movement are still unknown. In the present study the mutual protein movement in the membrane part of F(0)F(1)-ATP syntase has been analysed within the framework of rigid body mechanics. On the base of available experimental data it was shown that electrostatic interaction of two charged amino acids residues is able to supply quite enough energy for the rotation. The initial torque, which caused the rotation, was estimated as 3.7 pN nm and for this pattern the angular movement of c subunits complex could not physically have a period less than 10(-9)s. If membrane viscosity and elastic resistance were taken into account then the time of a whole turnover could rise up to 6.3 x 10(-3)s. It is remarkable that rotation will take place only under condition when the elasticity (Young's) module of the central stalk (gamma subunit and other minor subunits) is less than 5.0 x 10(7)N/m(2). Thus, for generally accepted structural parameters of ATP synthase, two-charge electrostatic interaction model does not permit rotation of the rotor if elastic properties of the central stalk are tougher than mentioned above. In order to explain the rotation under that condition one should either suppose a shorter distance between subunit a and c subunits complex or assume interaction of more than two charged amino acids residues.

Stochastic high-speed rotation of Escherichia coli ATP synthase F1 sector: the epsilon subunit-sensitive rotation

The gamma subunit of the ATP synthase F(1) sector rotates at the center of the alpha(3)beta(3) hexamer during ATP hydrolysis. A gold bead (40-200 nm diameter) was attached to the gamma subunit of Escherichia coli F(1), and then its ATP hydrolysis-dependent rotation was studied. The rotation speeds were variable, showing stochastic fluctuation. The high-speed rates of 40- and 60-nm beads were essentially similar: 721 and 671 rps (revolutions/s), respectively. The average rate of 60-nm beads was 381 rps, which is approximately 13-fold faster than that expected from the steady-state ATPase turnover number. These results indicate that the F(1) sector rotates much faster than expected from the bulk of ATPase activity, and that approximately 10% of the F(1) molecules are active on the millisecond time scale. Furthermore, the real ATP turnover number (number of ATP molecules converted to ADP and phosphate/s), as a single molecule, is variable during a short period. The epsilon subunit inhibited rotation and ATPase, whereas epsilon fused through its carboxyl terminus to cytochrome b(562) showed no effect. The epsilon subunit significantly increased the pausing time during rotation. Stochastic fluctuation of catalysis may be a general property of an enzyme, although its understanding requires combining studies of steady-state kinetics and single molecule observation.

The role of the epsilon subunit in the Escherichia coli ATP synthase. The C-terminal domain is required for efficient energy coupling

The role of the C-domain of the epsilon subunit of ATP synthase was investigated by fusing either the 20-kDa flavodoxin (Fd) or the 5-kDa chitin binding domain (CBD) to the N termini of both full-length epsilon and a truncation mutant epsilon(88-stop). All mutant epsilon proteins were stable in cells and supported F1F0 assembly. Cells expressing the Fd-epsilon or Fd-epsilon(88-stop) mutants were unable to grow on acetate minimal medium, indicating their inability to carry out oxidative phosphorylation because of steric blockage of rotation. The other forms of epsilon supported growth on acetate. Membrane vesicles containing Fd-epsilon showed 23% of the wild type ATPase activity but no proton pumping, suggesting that the ATP synthase is intrinsically partially uncoupled. Vesicles containing CBD-epsilon were indistinguishable from the wild type in ATPase activity and proton pumping, indicating that the N-terminal fusions alone do not promote uncoupling. Fd-epsilon(88-stop) caused higher rates of uncoupled ATP hydrolysis than Fd-epsilon, and epsilon(88-stop) showed an increased rate of membrane-bound ATP hydrolysis but decreased proton pumping relative to the wild type. Both results demonstrate the role of the C-domain in coupling. Analysis of the wild type and epsilon(88-stop) mutant membrane ATPase activities at concentrations of ATP from 50 mum to 8 mm showed no significant dependence of the ratio of bound/released ATPase activity on ATP concentration. These results support the hypothesis that the main function of the C-domain in the Escherichia coli epsilon subunit is to reduce uncoupled ATPase activity, rather than to regulate coupled activity.

Rapid hydrolysis of ATP by mitochondrial F1-ATPase correlates with the filling of the second of three catalytic sites

Strong positive catalytic cooperativity is a central feature of the binding change mechanism for F1-ATPases. However, a detail of the mechanism that remains controversial is whether the kinetic enhancement derived from using substrate-binding energy at one catalytic site to promote product release from another site occurs upon the filling of the second or third of three catalytic sites on F1. To address this question, we compare the ATP concentration dependence of the rate of ATP hydrolysis by F1 from beef heart mitochondria to the ATP concentration dependence of the level of occupancy of catalytic sites during steady-state catalysis as measured by a centrifuge filtration assay. A single Km(ATP) is observed at 77 +/- 6 microM. Analysis of the nucleotide-binding data shows that half-maximal occupancy of a second catalytic site occurs at 78 +/- 18 microM ATP. We conclude that ATP binding to a second catalytic site is sufficient to support rapid rates of catalysis.

Effect of n-octanesulphonylacetamide (OSA) on ATP and protein expression in Mycobacterium bovis BCG

OBJECTIVE

To determine the effect on BCG of n-octanesulphonylacetamide (OSA), a novel compound of the class beta-sulphonylcarboxamides, which has potent in vitro activity against pathogenic mycobacteria.

METHODS AND RESULTS

The effect of OSA in BCG was examined using two-dimensional protein electrophoresis. Treatment of BCG with OSA resulted in overexpression of two proteins identified as the b-subunit of ATP synthase (Rv1306) and a 17 kDa heat shock protein (Rv0251c). [35S]Methionine pulse-labelling revealed that overexpression occurred within as little as 3.5 h post-exposure. These results were confirmed by RT-PCR. ATP levels decreased in OSA-treated BCG at 5 min, and 1, 3 and 24 h, with a 64%, 45%, 54% and 73% reduction in ATP, respectively. Only dicyclohexylcarbodiimide (DCCD), a known ATP synthase inhibitor, had a similar effect. No appreciable difference in ATP level was observed in BCG treated with standard antimycobacterial drugs, additional respiratory chain inhibitors or a fatty acid synthase inhibitor at a comparable time-point. Protein synthesis decreased within 5 min of exposure to OSA (56%), DCCD (74%) and thenoyltrifluoroacetone (TTFA) (77%). Ethanol (2.3%) potentiated the activity of OSA. In contrast, no synergic effect was observed with streptomycin and ethanol. Mycolic acid levels decreased 79% with DCCD, 46% with TTFA, a complex II inhibitor, and 43% with OSA compared with untreated controls.

CONCLUSIONS

Our results suggest that OSA may interfere directly or indirectly with ATP synthase and possibly other components of the mycobacterial respiratory chain. These effects may hinder energy production, leading to interruption in the synthesis of large macromolecules including proteins and mycolic acids.

Rotor/Stator interactions of the epsilon subunit in Escherichia coli ATP synthase and implications for enzyme regulation

The H(+)-translocating F(0)F(1)-ATP synthase of Escherichia coli functions as a rotary motor, coupling the transmembrane movement of protons through F(0) to the synthesis of ATP by F(1). Although the epsilon subunit appears to be tightly associated with the gamma subunit in the central stalk region of the rotor assembly, several studies suggest that the C-terminal domain of epsilon can undergo significant conformational change as part of a regulatory process. Here we use disulfide cross-linking of substituted cysteines on functionally coupled ATP synthase to characterize interactions of epsilon with an F(0) component of the rotor (subunit c) and with an F(1) component of the stator (subunit beta). Oxidation of the engineered F(0)F(1) causes formation of two disulfide bonds, betaD380C-S108C epsilon and epsilonE31C-cQ42C, to give a beta-epsilon-c cross-linked product in high yield. The results demonstrate the ability of epsilon to span the central stalk region from the surface of the membrane (epsilon-c) to the bottom of F(1) (beta-epsilon) and suggest that the conformation detected here is distinct from both the "closed" state seen with isolated epsilon (Uhlin, U., Cox, G. B., and Guss, J. M. (1997) Structure 5, 1219-1230) and the "open" state seen in a complex with a truncated form of the gamma subunit (Rodgers, A. J., and Wilce, M. C. (2000) Nat. Struct. Biol. 7, 1051-1054). The kinetics of beta-epsilon and epsilon-c cross-linking were studied separately using F(0)F(1) containing one or the other matched cysteine pair. The rate of cross-linking at the epsilon/c (rotor/rotor) interface is not influenced by the type of nucleotide added. In contrast, the rate of beta-epsilon cross-linking is fastest under ATP hydrolysis conditions, intermediate with MgADP, and slowest with MgAMP-PNP. This is consistent with a regulatory role for a reversible beta/epsilon (stator/rotor) interaction that blocks rotation and inhibits catalysis. Furthermore, the rate of beta-epsilon cross-linking is much faster than that indicated by previous studies, allowing for the possibility of a rapid response to regulatory signals.

ATP synthase that lacks F0a-subunit: isolation, properties, and indication of F0b2-subunits as an anchor rail of a rotating c-ring

In a rotary motor F1F0-ATP synthase, F0 works as a proton motor; the oligomer ring of F0c-subunits (c-ring) rotates relative to the F0ab2 domain as protons pass through F0 down the gradient. F0ab2 must exert dual functions during rotation, that is, sliding the c-ring (motor drive) while keeping the association with the c-ring (anchor rail). Here we have isolated thermophilic F1F0(-a) which lacks F0a. F1F0(-a) has no proton transport activity, and F0(-a) does not work as a proton channel. Interestingly, ATPase activity of F1F0(-a) is greatly suppressed, even though its F1 sector is intact. Most likely, F0b2 associates with the c-ring as an anchor rail in the intact F1F0; without F0a, this association prevents rotation of the c-ring (and hence the gamma-subunit), which disables ATP hydrolysis at F1. Functional F1F0 is easily reconstituted from purified F0a and F1F0(-a), and thus F0a can bind to its proper location on F1F0(-a) without a large rearrangement of other-subunits.

Aqueous access pathways in subunit a of rotary ATP synthase extend to both sides of the membrane

The role of subunit a in promoting proton translocation and rotary motion in the Escherichia coli F1Fo ATP synthase is poorly understood. In the membrane-bound Fo sector of the enzyme, H+ binding and release occur at Asp-61 in the middle of the second transmembrane helix (TMH) of subunit c. Protons are thought to reach Asp-61 at the center of the membrane via aqueous channels formed at least in part by one or more of the five TMHs of subunit a. Aqueous access pathways have previously been mapped to surfaces of aTMH4. Here we have substituted Cys into the second and fifth TMHs of subunit a and carried out chemical modification with Ag+ and N-ethylmaleimide to define the aqueous accessibility of residues along these helices. Access to cAsp-61 at the center of the membrane may be mediated in part by Ag+-sensitive residues 248, 249, 251, and 252 in aTMH5. From the periplasmic surface, aqueous access to cAsp-61 may be mediated by silver-sensitive residues 115, 116, 119, 120, 122, and 126 in aTMH2. The Ag+-sensitive residues in TMH2, -4, and -5 form a continuum extending from the periplasmic to the cytoplasmic side of the membrane. In an arrangement of helices supported by second-site revertant and crosslinking analyses, these residues cluster at the interior of a four-helix bundle formed by TMH2-5. The aqueous access pathways at the interior of subunit a may be gated by a swiveling of helices in this bundle, alternately exposing cytoplasmic and periplasmic half channels to cAsp-61 during the H+ transport cycle.

Direct interaction of subunits a and b of the F0 complex of Escherichia coli ATP synthase by forming an ab2 subcomplex

The addition of a His6 tag to the N terminus of subunit a of the F0 complex of the Escherichia coli ATP synthase allowed the purification of an ab2 subcomplex after solubilization of membranes with n-dodecyl-beta-d-maltoside and subsequent nickel-nitrilotriacetic acid affinity chromatography. After co-reconstitution of the ab2 subcomplex with purified subunit c, passive proton translocation rates as well as coupled ATPase activities after binding of F1 were measured that were comparable with those of wild type F0. The interaction between subunits a and b, which has been shown to be stoichiometric and functional, is not triggered by any cross-linking reagent and therefore reflects subunit interactions occurring within the F0 complex in vivo.

Voltage-gated proton channels and other proton transfer pathways

Proton channels exist in a wide variety of membrane proteins where they transport protons rapidly and efficiently. Usually the proton pathway is formed mainly by water molecules present in the protein, but its function is regulated by titratable groups on critical amino acid residues in the pathway. All proton channels conduct protons by a hydrogen-bonded chain mechanism in which the proton hops from one water or titratable group to the next. Voltage-gated proton channels represent a specific subset of proton channels that have voltage- and time-dependent gating like other ion channels. However, they differ from most ion channels in their extraordinarily high selectivity, tiny conductance, strong temperature and deuterium isotope effects on conductance and gating kinetics, and insensitivity to block by steric occlusion. Gating of H(+) channels is regulated tightly by pH and voltage, ensuring that they open only when the electrochemical gradient is outward. Thus they function to extrude acid from cells. H(+) channels are expressed in many cells. During the respiratory burst in phagocytes, H(+) current compensates for electron extrusion by NADPH oxidase. Most evidence indicates that the H(+) channel is not part of the NADPH oxidase complex, but rather is a distinct and as yet unidentified molecule.

Structural model of the transmembrane Fo rotary sector of H+-transporting ATP synthase derived by solution NMR and intersubunit cross-linking in situ

H(+)-transporting, F(1)F(o)-type ATP synthases utilize a transmembrane H(+) potential to drive ATP formation by a rotary catalytic mechanism. ATP is formed in alternating beta subunits of the extramembranous F(1) sector of the enzyme, synthesis being driven by rotation of the gamma subunit in the center of the F(1) molecule between the alternating catalytic sites. The H(+) electrochemical potential is thought to drive gamma subunit rotation by first coupling H(+) transport to rotation of an oligomeric rotor of c subunits within the transmembrane F(o) sector. The gamma subunit is forced to turn with the c-oligomeric rotor due to connections between subunit c and the gamma and epsilon subunits of F(1). In this essay we will review recent studies on the Escherichia coli F(o) sector. The monomeric structure of subunit c, determined by NMR, shows that subunit c folds in a helical hairpin with the proton carrying Asp(61) centered in the second transmembrane helix (TMH). A model for the structural organization of the c(10) oligomer in F(o) was deduced from extensive cross-linking studies and by molecular modeling. The model indicates that the H(+)-carrying carboxyl of subunit c is occluded between neighboring subunits of the c(10) oligomer and that two c subunits pack in a "front-to-back" manner to form the H(+) (cation) binding site. In order for protons to gain access to Asp(61) during the protonation/deprotonation cycle, we propose that the outer, Asp(61)-bearing TMH-2s of the c-ring and TMHs from subunits composing the inlet and outlet channels must turn relative to each other, and that the swiveling motion associated with Asp(61) protonation/deprotonation drives the rotation of the c-ring. The NMR structures of wild-type subunit c differs according to the protonation state of Asp(61). The idea that the conformational state of subunit c changes during the catalytic cycle is supported by the cross-linking evidence in situ, and two recent NMR structures of functional mutant proteins in which critical residues have been switched between TMH-1 and TMH-2. The structural information is considered in the context of the possible mechanism of rotary movement of the c(10) oligomer during coupled synthesis of ATP.

Rotation of the c subunit oligomer in EF(0)EF(1) mutant cD61N

ATP synthases (F(0)F(1)-ATPases) mechanically couple ion flow through the membrane-intrinsic portion, F(0), to ATP synthesis within the peripheral portion, F(1). The coupling most probably occurs through the rotation of a central rotor (subunits c(10)epsilon gamma) relative to the stator (subunits ab(2)delta(alpha beta)(3)). The translocation of protons is conceived to involve the rotation of the ring of c subunits (the c oligomer) containing the essential acidic residue cD61 against subunits ab(2). In line with this notion, the mutants cD61N and cD61G have been previously reported to lack proton translocation. However, it has been surprising that the membrane-bound mutated holoenzyme hydrolyzed ATP but without translocating protons. Using detergent-solubilized and immobilized EF(0)F(1) and by application of the microvideographic assay for rotation, we found that the c oligomer, which carried a fluorescent actin filament, rotates in the presence of ATP in the mutant cD61N just as in the wild type enzyme. This observation excluded slippage among subunit gamma, the central rotary shaft, and the c oligomer and suggested free rotation without proton pumping between the oligomer and subunit a in the membrane-bound enzyme.

Genetic fusions of globular proteins to the epsilon subunit of the Escherichia coli ATP synthase: Implications for in vivo rotational catalysis and epsilon subunit function

The rotational mechanism of ATP synthase was investigated by fusing three proteins from Escherichia coli, the 12-kDa soluble cytochrome b(562), the 20-kDa flavodoxin, and the 28-kDa flavodoxin reductase, to the C terminus of the epsilon subunit of the enzyme. According to the concept of rotational catalysis, because epsilon is part of the rotor a large domain added at this site should sterically clash with the second stalk, blocking rotation and fully inhibiting the enzyme. E. coli cells expressing the cytochrome b(562) fusion in place of wild-type epsilon grew using acetate as the energy source, indicating their capacity for oxidative phosphorylation. Cells expressing the larger flavodoxin or flavodoxin reductase fusions failed to grow on acetate. Immunoblot analysis showed that the fusion proteins were stable in the cells and that they had no effect on enzyme assembly. These results provide initial evidence supporting rotational catalysis in vivo. In membrane vesicles, the cytochrome b(562) fusion caused an increase in the apparent ATPase activity but a minor decrease in proton pumping. Vesicles bearing ATP synthase containing the larger fusion proteins showed reduced but significant levels of ATPase activity that was sensitive to inhibition by dicyclohexylcarbodiimide (DCCD) but no proton pumping. Thus, all fusions to epsilon generated an uncoupled component of ATPase activity. These results imply that a function of the C terminus of epsilon in F(1)F(0) is to increase the efficiency of the enzyme by specifically preventing the uncoupled hydrolysis of ATP. Given the sensitivity to DCCD, this uncoupled ATP hydrolysis may arise from rotational steps of gammaepsilon in the inappropriate direction after ATP is bound at the catalytic site. It is proposed that the C-terminal domain of epsilon functions to ensure that rotation occurs only in the direction of ATP synthesis when ADP is bound and only in the direction of hydrolysis when ATP is bound.

Folding and stability of the b subunit of the F(1)F(0) ATP synthase

The F(1)F(0) ATP synthase is a reversible molecular motor that employs a rotary catalytic cycle to couple a chemiosmotic membrane potential to the formation/hydrolysis of ATP. The multisubunit enzyme contains two copies of the b subunit that form a homodimer as part of a narrow, peripheral stalk structure that connects the membrane (F(0)) and soluble (F(1)) sectors. The three-dimensional structure of the b subunit is unknown making the nature of any interactions or conformational changes within the F(1)F(0) complex difficult to interpret. We have used circular dichroism and analytical ultracentrifugation analyses of a series of N- and C-terminal truncated b proteins to investigate its stability and structure. Thermal denaturation of the b constructs exhibited distinct two-state, cooperative unfolding with T(m) values between 30 and 40 degrees C. CD spectra for the region comprising residues 53-122 (b(53-122)) showed theta;(222)/theta;(208) = 0.99, which reduced to 0.92 in the presence of the hydrophobic solvent trifluoroethanol. Thermodynamic parameters for b(53-122) (DeltaG, DeltaH and DeltaC(p)) were similar to those reported for several nonideal, coiled-coil proteins. Together these results are most consistent with a noncanonical and unstable parallel coiled-coil at the interface of the b dimer.

F(0) of ATP synthase is a rotary proton channel. Obligatory coupling of proton translocation with rotation of c-subunit ring

Coupling of proton flow and rotation in the F(0) motor of ATP synthase was investigated using the thermophilic Bacillus PS3 enzyme expressed functionally in Escherichia coli cells. Cysteine residues introduced into the N-terminal regions of subunits b and c of ATP synthase (bL2C/cS2C) were readily oxidized by treating the expressing cells with CuCl(2) to form predominantly a b-c cross-link with b-b and c-c cross-links being minor products. The oxidized ATP synthases, either in the inverted membrane vesicles or in the reconstituted proteoliposomes, showed drastically decreased proton pumping and ATPase activities compared with the reduced ones. Also, the oxidized F(0), either in the F(1)-stripped inverted vesicles or in the reconstituted F(0)-proteoliposomes, hardly mediated passive proton translocation through F(0). Careful analysis using single mutants (bL2C or cS2C) as controls indicated that the b-c cross-link was responsible for these defects. Thus, rotation of the c-oligomer ring relative to subunit b is obligatory for proton translocation; if there is no rotation of the c-ring there is no proton flow through F(0).

Self-assembly of ATP synthase subunit c rings

Subunit c of the H(+) transporting ATP synthase is an essential part of its membrane domain that participates in transmembrane proton conduction. The annular architecture of the subunit c from different species has been previously reported. However, little is known about the type of interactions that affect the formation of c-rings in the ATPase complex. Here we report that subunit c over-expressed in Escherichia coli and purified in non-ionic detergent solutions self-assembles into annular structures in the absence of other subunits of the complex. The results suggest that the ability of subunit c to form rings is determined by its primary structure.

Energy-driven subunit rotation at the interface between subunit a and the c oligomer in the F(O) sector of Escherichia coli ATP synthase

Subunit rotation within the F(1) catalytic sector of the ATP synthase has been well documented, identifying the synthase as the smallest known rotary motor. In the membrane-embedded F(O) sector, it is thought that proton transport occurs at a rotor/stator interface between the oligomeric ring of c subunits (rotor) and the single-copy a subunit (stator). Here we report evidence for an energy-dependent rotation at this interface. F(O)F(1) was expressed with a pair of substituted cysteines positioned to allow an intersubunit disulfide crosslink between subunit a and a c subunit [aN214C/cM65C; Jiang, W. & Fillingame, R. H. (1998) Proc. Natl. Acad. Sci. USA 95, 6607--6612]. Membranes were treated with N,N'-dicyclohexyl-[(14)C]carbodiimide to radiolabel the D61 residue on less than 20% of the c subunits. After oxidation to form an a--c crosslink, the c subunit properly aligned to crosslink to subunit a was found to contain very little (14)C label relative to other members of the c ring. However, exposure to MgATP before oxidation significantly increased the radiolabel in the a-c crosslink, indicating that a different c subunit was now aligned with subunit a. This increase was not induced by exposure to MgADP/P(i). Furthermore, preincubation with MgADP and azide to inhibit F(1) or with high concentrations of N,N'-dicyclohexylcarbodiimide to label most c subunits prevented the ATP effect. These results provide evidence for an energy-dependent rotation of the c ring relative to subunit a.

Rat mitochondrial ATP synthase ATP5G3: cloning and upregulation in pancreas after chronic ethanol feeding

Individuals with chronic excessive alcohol ingestion are put at the risk of acute and chronic pancreatitis. Underlying molecular mechanisms are unknown. Differential gene expression in the pancreas was profiled using mRNA differential display by comparison between control and ethanol-consuming rats. Male Wistar rats were fed with diets containing 6.7% (vol/vol) ethanol for 4 wk. A cDNA tag that was overexpressed in the pancreas of rats fed ethanol was isolated. A 723-bp cDNA was cloned from a rat pancreatic cDNA library, which encodes a novel rat mitochondrial ATP synthase subunit 9, isoform 3 (ATP5G3), which is homologous to a human ATP5G3 gene. Real-time PCR demonstrated that all three nuclear gene isoforms (ATP5G1, ATP5G2, and ATP5G3) were consistently upregulated in the pancreas of alcohol-consuming rats, parallel with mitochondrial injury. The cellular response to mitochondrial damage and metabolic stress may reflect an adaptive process for mitochondrial repair in pancreatic acinar cells during chronic ethanol ingestion.

The preferred stoichiometry of c subunits in the rotary motor sector of Escherichia coli ATP synthase is 10

The stoichiometry of c subunits in the H(+)-transporting F(o) rotary motor of ATP synthase is uncertain, the most recent suggestions varying from 10 to 14. The stoichiometry will determine the number of H(+) transported per ATP synthesized and will directly relate to the P/O ratio of oxidative phosphorylation. The experiments described here show that the number of c subunits in functional complexes of F(o)F(1) ATP synthase from Escherichia coli can be manipulated, but that the preferred number is 10. Mixtures of genetically fused cysteine-substituted trimers (c(3)) and tetramers (c(4)) of subunit c were coexpressed and the c subunits crosslinked in the plasma membrane. Prominent products corresponding to oligomers of c(7) and c(10) were observed in the membrane and purified F(o)F(1) complex, indicating that the c(10) oligomer formed naturally. Oligomers larger than c(10) were also observed in the membrane fraction of cells expressing c(3) or c(4) individually, or in cells coexpressing c(3) and c(4) together, but these larger oligomers did not copurify with the functional F(o)F(1) complex and were concluded to be aberrant products of assembly in the membrane.

The rotor in the membrane of the ATP synthase and relatives

In recent years, structural information on the F(1) sector of the ATP synthase has provided an insight into the molecular mechanism of ATP catalysis. The structure strongly supports the proposal that the ATP synthase works as a rotary molecular motor. Insights into the membrane domain have just started to emerge but more detailed structural information is needed if the molecular mechanism of proton translocation coupled to ATP synthesis is to be understood. This review will focus mainly on the ion translocating rotor in the membrane domain of the F-type ATPase, and the related vacuolar and archaeal relatives.

Introduction of a carboxyl group in the first transmembrane helix of Escherichia coli F1Fo ATPase subunit c and cytoplasmic pH regulation

The multicopy subunit c of the H(+)-transporting F1Fo ATP synthase of Escherichia coli folds across the membrane as a hairpin of two hydrophobic alpha helices. The subunits interact in a front-to-back fashion, forming an oligomeric ring with helix 1 packing in the interior and helix 2 at the periphery. A conserved carboxyl, Asp(61) in E. coli, centered in the second transmembrane helix is essential for H+ transport. A second carboxylic acid in the first transmembrane helix is found at a position equivalent to Ile28 in several bacteria, some the cause of serious infectious disease. This side chain has been predicted to pack proximal to the essential carboxyl in helix 2. It appears that in some of these bacteria the primary function of the enzyme is H+ pumping for cytoplasmic pH regulation. In this study, Ile28 was changed to Asp and Glu. Both mutants were functional. However, unlike the wild type, the mutants showed pH-dependent ATPase-coupled H+ pumping and passive H+ transport through Fo. The results indicate that the presence of a second carboxylate enables regulation of enzyme function in response to cytoplasmic pH and that the ion binding pocket is aqueous accessible. The presence of a single carboxyl at position 28, in mutants I28D/D61G and I28E/D61G, did not support growth on a succinate carbon source. However, I28E/D61G was functional in ATPase-coupled H+ transport. This result indicates that the side chain at position 28 is part of the ion binding pocket.

Movement of the helical domain of the epsilon subunit is required for the activation of thermophilic F1-ATPase

The inhibitory effect of epsilon subunit in F(1)-ATPase from thermophilic Bacillus PS3 was examined focusing on the structure-function relationship. For this purpose, we designed a mutant for epsilon subunit similar to the one constructed by Schulenberg and Capaldi (Schulenberg, B., and Capaldi, R. A. (1999) J. Biol. Chem. 274, 28351-28355). We introduced two cysteine residues at the interface of N-terminal beta-sandwich domain (S48C) and C-terminal alpha-helical domain (N125C) of epsilon subunit. The alpha(3)beta(3)gammaepsilon complex containing the reduced form of this mutant epsilon subunit showed suppressed ATPase activity and gradual activation during the measurement. This activation pattern was similar to the complex with the wild type epsilon subunit. The conformation of the mutant epsilon subunit must be fixed and similar to the reported three-dimensional structure of the isolated epsilon subunit, when the intramolecular disulfide bridge was formed on this subunit by oxidation. This oxidized mutant epsilon subunit could form the alpha(3)beta(3)gammaepsilon complex but did not show any inhibitory effect. The complex was converted to the activated state, and the cross-link in the mutant epsilon subunit in the complex was efficiently formed in the presence of ATP-Mg, whereas no cross-link was observed without ATP-Mg, suggesting the conformation of the oxidized mutant epsilon subunit must be similar to that in the activated state complex. A non-hydrolyzable analog of ATP, 5'-adenylyl-beta,gamma-imidodiphosphate, could stimulate the formation of the cross-link on the epsilon subunit. Furthermore, the cross-link formation was stimulated by nucleotides even when this mutant epsilon subunit was assembled with a mutant alpha(3)beta(3)gamma complex lacking non-catalytic sites. These results indicate that binding of ATP to the catalytic sites induces a conformational change in the epsilon subunit and triggers transition of the complex from the suppressed state to the activated state.

Subunit organization of the stator part of the F0 complex from Escherichia coli ATP synthase

Membrane-bound ATP synthases (F1F0) catalyze the synthesis of ATP via a rotary catalytic mechanism utilizing the energy of an electrochemical ion gradient. The transmembrane potential is supposed to propel rotation of a subunit c ring of F0 together with subunits gamma and epsilon of F1, thereby forming the rotor part of the enzyme, whereas the remainder of the F1F0 complex functions as a stator for compensation of the torque generated during rotation. This review focuses on our recent work on the stator part of the F0 complex, e.g., subunits a and b. Using epitope insertion and antibody binding, subunit a was shown to comprise six transmembrane helixes with both the N- and C-terminus oriented toward the cytoplasm. By use of circular dichroism (CD) spectroscopy, the secondary structure of subunit b incorporated into proteoliposomes was determined to be 80% alpha-helical together with 14% beta turn conformation, providing flexibility to the second stalk. Reconstituted subunit b together with isolated ac subcomplex was shown to be active in proton translocation and functional F1 binding revealing the native conformation of the polypeptide chain. Chemical crosslinking in everted membrane vesicles led to the formation of subunit b homodimers around residues bQ37 to bL65, whereas bA32C could be crosslinked to subunit a, indicating a close proximity of subunits a and b near the membrane. Further evidence for the proposed direct interaction between subunits a and b was obtained by purification of a stable ab2 subcomplex via affinity chromatography using His tags fused to subunit a or b. This ab2 subcomplex was shown to be active in proton translocation and F1 binding, when coreconstituted with subunit c. Consequences of crosslink formation and subunit interaction within the F1F0 complex are discussed.