Rotation of a complex of the gamma subunit and c ring of Escherichia coli ATP synthase. The rotor and stator are interchangeable

Proton Pumping ATPases: Rotational Catalysis, Physiological Roles in Oral Pathogenic Bacteria, and Inhibitors

Proton pumping ATPases, both F-type and V/A-type ATPases, generate ATP using electrochemical energy or pump protons/sodium ions by hydrolyzing ATP. The enzymatic reaction and proton transport are coupled through subunit rotation, and this unique rotational mechanism (rotational catalysis) has been intensively studied. Single-molecule and thermodynamic analyses have revealed the detailed rotational mechanism, including the catalytically inhibited state and the roles of subunit interactions. In mammals, F- and V-ATPases are involved in ATP synthesis and organelle acidification, respectively. Most bacteria, including anaerobes, have F- and/or A-ATPases in the inner membrane. However, these ATPases are not believed to be essential in anaerobic bacteria since anaerobes generate sufficient ATP without oxidative phosphorylation. Recent studies suggest that F- and A-ATPases perform indispensable functions beyond ATP synthesis in oral pathogenic anaerobes; F-ATPase is involved in acid tolerance in Streptococcus mutans, and A-ATPase mediates nutrient import in Porphyromonas gingivalis. Consistently, inhibitors of oral bacterial F- and A-ATPases, such as phytopolyphenols and bedaquiline, strongly diminish growth and survival. Herein, we discuss rotational catalysis of bacterial F- and A-ATPases, and discuss their physiological roles, focusing on oral bacteria. We also review the effects of ATPase inhibitors on the growth and survival of oral pathogenic bacteria. The features of the catalytic mechanism and unique physiological roles in oral bacteria highlight the potential for proton pumping ATPases to serve as targets for oral antimicrobial agents.

Regulatory Mechanisms and Environmental Adaptation of the F-ATPase Family

The F-type ATPase family of enzymes, including ATP synthases, are found ubiquitously in biological membranes. ATP synthesis from ADP and inorganic phosphate is driven by an electrochemical H⁺ gradient or H⁺ motive force, in which intramolecular rotation of F-type ATPase is generated with H⁺ transport across the membranes. Because this rotation is essential for energy coupling between catalysis and H⁺-transport, regulation of the rotation is important to adapt to environmental changes and maintain ATP concentration. Recently, a series of cryo-electron microscopy images provided detailed insights into the structure of the H⁺ pathway and the multiple subunit arrangement. However, the regulatory mechanism of the rotation has not been clarified. This review describes the inhibition mechanism of ATP hydrolysis in bacterial enzymes. In addition, properties of the F-type ATPase of Streptococcus mutans, which acts as a H⁺-pump in an acidic environment, are described. These findings may help in the development of novel antimicrobial agents.

Discovery and Study of Transmembrane Rotary Ion-Translocating Nano-Motors: F-ATPase/Synthase of Mitochondria/Bacteria and V-ATPase of Eukaryotic Cells

This review discusses the history of discovery and study of the operation of the two rotary ion-translocating ATPase nano-motors: (i) F-ATPase/synthase (holocomplex F₁F_O) of mitochondria/bacteria and (ii) eukaryotic V-ATPase (holocomplex V₁V_O). Vacuolar adenosine triphosphatase (V-ATPase) is a transmembrane multisubunit complex found in all eukaryotes from yeast to humans. It is structurally and functionally similar to the F-ATPase/synthase of mitochondria/bacteria and the A-ATPase/synthase of archaebacteria, which indicates a common evolutionary origin of the rotary ion-translocating nano-motors built into cell membranes and invented by Nature billions of years ago. Previously we have published several reviews on this topic with appropriate citations of our original research. This review is focused on the historical analysis of the discovery and study of transmembrane rotary ion-translocating ATPase nano-motors functioning in bacteria, eukaryotic cells and mitochondria of animals.

The carboxyl-terminal helical domain of the ATP synthase γ subunit is involved in ε subunit conformation and energy coupling

The γ subunit located at the center of ATP synthase (F_OF₁) plays critical roles in catalysis. Escherichia coli mutant with Pro substitution of the γ subunit residue γLeu218, which are located the rotor shaft near the c subunit ring, decreased NADH-driven ATP synthesis activity and ATP hydrolysis-dependent H⁺ transport of membranes to ~60% and ~40% of the wild type, respectively, without affecting F_OF₁ assembly. Consistently, the mutant was defective in growth by oxidative phosphorylation, indicating that energy coupling is impaired by the mutation. The ε subunit conformations in the γLeu218Pro mutant enzyme were investigated by cross-linking between cysteine residues introduced into both the ε subunit (εCys118 and εCys134, in the second helix and the hook segment, respectively) and the γ subunit (γCys99 and γCys260, located in the globular domain and the carboxyl-terminal helix, respectively). In the presence of ADP, the two γ260 and ε134 cysteine residues formed a disulfide bond in both the γLeu218Pro mutant and the wild type, indicating that the hook segment of ε subunit penetrates into the α₃β₃-ring along with the γ subunits in both enzymes. However, γ260/ε134 cross-linking in the γLeu218Pro mutant decreased significantly in the presence of ATP, whereas this effect was small in the wild type. These results suggested that the γ subunit carboxyl-terminal helix containing γLeu218 is involved in the conformation of the ε subunit hook region during ATP hydrolysis and, therefore, is required for energy coupling in F_OF₁.

Helical arrays of U-shaped ATP synthase dimers form tubular cristae in ciliate mitochondria

F1Fo-ATP synthases are universal energy-converting membrane protein complexes that synthesize ATP from ADP and inorganic phosphate. In mitochondria of yeast and mammals, the ATP synthase forms V-shaped dimers, which assemble into rows along the highly curved ridges of lamellar cristae. Using electron cryotomography and subtomogram averaging, we have determined the in situ structure and organization of the mitochondrial ATP synthase dimer of the ciliate Paramecium tetraurelia. The ATP synthase forms U-shaped dimers with parallel monomers. Each complex has a prominent intracrista domain, which links the c-ring of one monomer to the peripheral stalk of the other. Close interaction of intracrista domains in adjacent dimers results in the formation of helical ATP synthase dimer arrays, which differ from the loose dimer rows in all other organisms observed so far. The parameters of the helical arrays match those of the cristae tubes, suggesting the unique features of the P. tetraurelia ATP synthase are directly responsible for generating the helical tubular cristae. We conclude that despite major structural differences between ATP synthase dimers of ciliates and other eukaryotes, the formation of ATP synthase dimer rows is a universal feature of mitochondria and a fundamental determinant of cristae morphology.

ATP Synthesis by Oxidative Phosphorylation

The F1F0-ATP synthase (EC 3.6.1.34) is a remarkable enzyme that functions as a rotary motor. It is found in the inner membranes of Escherichia coli and is responsible for the synthesis of ATP in response to an electrochemical proton gradient. Under some conditions, the enzyme functions reversibly and uses the energy of ATP hydrolysis to generate the gradient. The ATP synthase is composed of eight different polypeptide subunits in a stoichiometry of α3β3γδεab2c10. Traditionally they were divided into two physically separable units: an F1 that catalyzes ATP hydrolysis (α3β3γδε) and a membrane-bound F0 sector that transports protons (ab2c10). In terms of rotary function, the subunits can be divided into rotor subunits (γεc10) and stator subunits (α3β3δab2). The stator subunits include six nucleotide binding sites, three catalytic and three noncatalytic, formed primarily by the β and α subunits, respectively. The stator also includes a peripheral stalk composed of δ and b subunits, and part of the proton channel in subunit a. Among the rotor subunits, the c subunits form a ring in the membrane, and interact with subunit a to form the proton channel. Subunits γ and ε bind to the c-ring subunits, and also communicate with the catalytic sites through interactions with α and β subunits. The eight subunits are expressed from a single operon, and posttranscriptional processing and translational regulation ensure that the polypeptides are made at the proper stoichiometry. Recent studies, including those of other species, have elucidated many structural and rotary properties of this enzyme.

The Fab1/PIKfyve phosphoinositide phosphate kinase is not necessary to maintain the pH of lysosomes and of the yeast vacuole

Lysosomes and the yeast vacuole are degradative and acidic organelles. Phosphatidylinositol 3,5-bisphosphate (PtdIns(3,5)P2), a master architect of endolysosome and vacuole identity, is thought to be necessary for vacuolar acidification in yeast. There is also evidence that PtdIns(3,5)P2 may play a role in lysosomal acidification in higher eukaryotes. Nevertheless, these conclusions rely on qualitative assays of lysosome/vacuole pH. For example, quinacrine, an acidotropic fluorescent base, does not accumulate in the vacuoles of fab1Δ yeast. Fab1, along with its mammalian ortholog PIKfyve, is the lipid kinase responsible for synthesizing PtdIns(3,5)P2. In this study, we employed several assays that quantitatively assessed the lysosomal and vacuolar pH in PtdIns(3,5)P2-depleted cells. Using ratiometric imaging, we conclude that lysosomes retain a pH < 5 in PIKfyve-inhibited mammalian cells. In addition, quantitative fluorescence microscopy of vacuole-targeted pHluorin, a pH-sensitive GFP variant, indicates that fab1Δ vacuoles are as acidic as wild-type yeast. Importantly, we also employed fluorimetry of vacuoles loaded with cDCFDA, a pH-sensitive dye, to show that both wild-type and fab1Δ vacuoles have a pH < 5.0. In comparison, the vacuolar pH of the V-ATPase mutant vph1Δ or vph1Δ fab1Δ double mutant was 6.1. Although the steady-state vacuolar pH is not affected by PtdIns(3,5)P2 depletion, it may have a role in stabilizing the vacuolar pH during salt shock. Overall, we propose a model in which PtdIns(3,5)P2 does not govern the steady-state pH of vacuoles or lysosomes.

A mechano-chemiosmotic model for the coupling of electron and proton transfer to ATP synthesis in energy-transforming membranes: a personal perspective

ATP is synthesized using ATP synthase by utilizing energy either from the oxidation of organic compounds, or from light, via redox reactions (oxidative- or photo phosphorylation), in energy-transforming membranes of mitochondria, chloroplasts, and bacteria. ATP synthase undergoes several changes during its functioning. The generally accepted model for ATP synthesis is the well-known rotatory model (see e.g., Junge et al., Nature 459:364-370, 2009; Junge and Müller, Science 333:704-705, 2011). Here, we present an alternative modified model for the coupling of electron and proton transfer to ATP synthesis, which was initially developed by Albert Lester Lehninger (1917-1986). Details of the molecular mechanism of ATP synthesis are described here that involves cyclic low-amplitude shrinkage and swelling of mitochondria. A comparison of the well-known current model and the mechano-chemiosmotic model is also presented. Based on structural, and other data, we suggest that ATP synthase is a Ca(2+)/H(+)-K(+) Cl(-)-pump-pore-enzyme complex, in which γ-subunit rotates 360° in steps of 30°, and 90° due to the binding of phosphate ions to positively charged amino acid residues in the N-terminal γ-subunit, while in the electric field. The coiled coil b 2-subunits are suggested to act as ropes that are shortened by binding of phosphate ions to positively charged lysines or arginines; this process is suggested to pull the α 3 β 3-hexamer to the membrane during the energization process. ATP is then synthesized during the reverse rotation of the γ-subunit by destabilizing the phosphated N-terminal γ-subunit and b 2-subunits under the influence of Ca(2+) ions, which are pumped over from storage-intermembrane space into the matrix, during swelling of intermembrane space. In the process of ATP synthesis, energy is first, predominantly, used in the delivery of phosphate ions and protons to the α 3 β 3-hexamer against the energy barrier with the help of C-terminal alpha-helix of γ-subunit that acts as a lift; then, in the formation of phosphoryl group; and lastly, in the release of ATP molecules from the active center of the enzyme and the loading of ADP. We are aware that our model is not an accepted model for ATP synthesis, but it is presented here for further examination and test.

Metabolic Regulation of a Bacterial Cell System with Emphasis on Escherichia coli Metabolism

It is quite important to understand the overall metabolic regulation mechanism of bacterial cells such as Escherichia coli from both science (such as biochemistry) and engineering (such as metabolic engineering) points of view. Here, an attempt was made to clarify the overall metabolic regulation mechanism by focusing on the roles of global regulators which detect the culture or growth condition and manipulate a set of metabolic pathways by modulating the related gene expressions. For this, it was considered how the cell responds to a variety of culture environments such as carbon (catabolite regulation), nitrogen, and phosphate limitations, as well as the effects of oxygen level, pH (acid shock), temperature (heat shock), and nutrient starvation.

Rotation and structure of FoF1-ATP synthase

F(o)F(1)-ATP synthase is one of the most ubiquitous enzymes; it is found widely in the biological world, including the plasma membrane of bacteria, inner membrane of mitochondria and thylakoid membrane of chloroplasts. However, this enzyme has a unique mechanism of action: it is composed of two mechanical rotary motors, each driven by ATP hydrolysis or proton flux down the membrane potential of protons. The two molecular motors interconvert the chemical energy of ATP hydrolysis and proton electrochemical potential via the mechanical rotation of the rotary shaft. This unique energy transmission mechanism is not found in other biological systems. Although there are other similar man-made systems like hydroelectric generators, F(o)F(1)-ATP synthase operates on the nanometre scale and works with extremely high efficiency. Therefore, this enzyme has attracted significant attention in a wide variety of fields from bioenergetics and biophysics to chemistry, physics and nanoscience. This review summarizes the latest findings about the two motors of F(o)F(1)-ATP synthase as well as a brief historical background.

Single molecule behavior of inhibited and active states of Escherichia coli ATP synthase F1 rotation

ATP hydrolysis-dependent rotation of the F(1) sector of the ATP synthase is a successive cycle of catalytic dwells (∼0.2 ms at 24 °C) and 120° rotation steps (∼0.6 ms) when observed under V(max) conditions using a low viscous drag 60-nm bead attached to the γ subunit (Sekiya, M., Nakamoto, R. K., Al-Shawi, M. K., Nakanishi-Matsui, M., and Futai, M. (2009) J. Biol. Chem. 284, 22401-22410). During the normal course of observation, the γ subunit pauses in a stochastic manner to a catalytically inhibited state that averages ∼1 s in duration. The rotation behavior with adenosine 5'-O-(3-thiotriphosphate) as the substrate or at a low ATP concentration (4 μM) indicates that the rotation is inhibited at the catalytic dwell when the bound ATP undergoes reversible hydrolysis/synthesis. The temperature dependence of rotation shows that F(1) requires ∼2-fold higher activation energy for the transition from the active to the inhibited state compared with that for normal steady-state rotation during the active state. Addition of superstoichiometric ε subunit, the inhibitor of F(1)-ATPase, decreases the rotation rate and at the same time increases the duration time of the inhibited state. Arrhenius analysis shows that the ε subunit has little effect on the transition between active and inhibited states. Rather, the ε subunit confers lower activation energy of steady-state rotation. These results suggest that the ε subunit plays a role in guiding the enzyme through the proper and efficient catalytic and transport rotational pathway but does not influence the transition to the inhibited state.

Molecular dynamics simulations of the rotary motor F(0) under external electric fields across the membrane

The membrane-bound component F(0), which is a major component of the F(0)F(1)-ATP synthase, works as a rotary motor and plays a central role in driving the F(1) component to transform chemiosmotic energy into ATP synthesis. We conducted molecular dynamics simulations of b(2)-free F(0) in a 1-palmitoyl-2-oleoyl-phosphatidylcholine lipid bilayer for tens of nanoseconds with two different protonation states of the cAsp-61 residue at the interface of the a-c complex in the absence of electric fields and under electric fields of +/-0.03 V/nm across the membrane. To our surprise, we observed that the upper half of the N-terminal helix of the c(1) subunit rotated about its axis clockwise by 30 degrees . An energetic analysis revealed that the electrostatic repulsion between this N-terminal helix and subunit c(12) was a major contributor to the observed rotation. A correlation map analysis indicated that the correlated motions of residues in the interface of the a-c complex were significantly reduced by external electric fields. The deuterium order parameter (S(CD)) profile calculated by averaging all the lipids in the F(0)-bound bilayer was not very different from that of the pure bilayer system, in agreement with recent (2)H solid-state NMR experiments. However, by delineating the lipid properties according to their vicinity to F(0), we found that the S(CD) profiles of different lipid shells were prominently different. Lipids close to F(0) formed a more ordered structure. Similarly, the lateral diffusion of lipids on the membrane surface also followed a shell-dependent behavior. The lipids in the proximity of F(0) exhibited very significantly reduced diffusional motion. The numerical value of S(CD) was anticorrelated with that of the diffusion coefficient, i.e., the more ordered lipid structures led to slower lipid diffusion. Our findings will help elucidate the dynamics of F(0) depending on the protonation state and electric field, and may also shed some light on the interactions between the motor F(0) and its surrounding lipids under physiological conditions, which could help to rationalize its extraordinary energy conversion efficiency.

Roles of the beta subunit hinge domain in ATP synthase F(1) sector: hydrophobic network formed by introduced betaPhe174 inhibits subunit rotation

The ATP synthase beta subunit hinge domain (betaPhe148 approximately betaGly186, P-loop/alpha-helixB/loop/beta-sheet4, Escherichia coli residue numbering) dramatically changes in conformation upon nucleotide binding. We previously reported that F(1) with the betaSer174 to Phe mutation in the domain lowered the gamma subunit rotation speed, and thus decreased the ATPase activity [M. Nakanishi-Matsui, S. Kashiwagi, T. Ubukata, A. Iwamoto-Kihara, Y. Wada, M. Futai, Rotational catalysis of Escherichia coli ATP synthase F(1) sector. Stochastic fluctuation and a key domain of the beta subunit, J. Biol. Chem. 282 (2007) 20698-20704.]. Homology modeling indicates that the amino acid replacement induces a hydrophobic network, in which the betaMet159, betaIle163, and betaAla167 residues of the beta subunit are involved together with the mutant betaPhe174. The network is expected to stabilize the conformation of beta(DP) (nucleotide-bound form of the beta subunit), resulting in increased activation energy for transition to beta(E) (empty beta subunit). The modeling further predicts that replacement of betaMet159 with Ala or Ile weakens the hydrophobic network. As expected, these two mutations experimentally suppressed the ATPase activities as well as subunit rotation of betaS174F. Furthermore, the rotation rate decreased with the increase of the strength in the hydrophobic network. These results indicate that the smooth conformational change of the beta subunit hinge domain is pertinent for the rotational catalysis.

The mechanism of rotating proton pumping ATPases

Two proton pumps, the F-ATPase (ATP synthase, FoF1) and the V-ATPase (endomembrane proton pump), have different physiological functions, but are similar in subunit structure and mechanism. They are composed of a membrane extrinsic (F1 or V1) and a membrane intrinsic (Fo or Vo) sector, and couple catalysis of ATP synthesis or hydrolysis to proton transport by a rotational mechanism. The mechanism of rotation has been extensively studied by kinetic, thermodynamic and physiological approaches. Techniques for observing subunit rotation have been developed. Observations of micron-length actin filaments, or polystyrene or gold beads attached to rotor subunits have been highly informative of the rotational behavior of ATP hydrolysis-driven rotation. Single molecule FRET experiments between fluorescent probes attached to rotor and stator subunits have been used effectively in monitoring proton motive force-driven rotation in the ATP synthesis reaction. By using small gold beads with diameters of 40-60 nm, the E. coli F1 sector was found to rotate at surprisingly high speeds (>400 rps). This experimental system was used to assess the kinetics and thermodynamics of mutant enzymes. The results revealed that the enzymatic reaction steps and the timing of the domain interactions among the beta subunits, or between the beta and gamma subunits, are coordinated in a manner that lowers the activation energy for all steps and avoids deep energy wells through the rotationally-coupled steady-state reaction. In this review, we focus on the mechanism of steady-state F1-ATPase rotation, which maximizes the coupling efficiency between catalysis and rotation.

Temperature dependence of single molecule rotation of the Escherichia coli ATP synthase F1 sector reveals the importance of gamma-beta subunit interactions in the catalytic dwell

The temperature-dependent rotation of F1-ATPase gamma subunit was observed in V(max) conditions at low viscous drag using a 60-nm gold bead (Nakanishi-Matsui, M., Kashiwagi, S., Hosokawa, H., Cipriano, D. J., Dunn, S. D., Wada, Y., and Futai, M. (2006) J. Biol. Chem. 281, 4126-4131). The Arrhenius slopes of the speed of the individual 120 degrees steps and reciprocal of the pause length between rotation steps were very similar, indicating a flat energy pathway followed by the rotationally coupled catalytic cycle. In contrast, the Arrhenius slope of the reciprocal pause length of the gammaM23K mutant F1 was significantly increased, whereas that of the rotation rate was similar to wild type. The effects of the rotor gammaM23K substitution and the counteracting effects of betaE381D mutation in the interacting stator subunits demonstrate that the rotor-stator interactions play critical roles in the utilization of stored elastic energy. The gammaM23K enzyme must overcome an abrupt activation energy barrier, forcing it onto a less favored pathway that results in uncoupling catalysis from rotation.

Stochastic rotational catalysis of proton pumping F-ATPase

F-ATPases synthesize ATP from ADP and phosphate coupled with an electrochemical proton gradient in bacterial or mitochondrial membranes and can hydrolyse ATP to form the gradient. F-ATPases consist of a catalytic F1 and proton channel F0 formed from the alpha3beta3gammadelta and ab2c10 subunit complexes, respectively. The rotation of gammaepsilonc10 couples catalyses and proton transport. Consistent with the threefold symmetry of the alpha3beta3 catalytic hexamer, 120 degrees stepped revolution has been observed, each step being divided into two substeps. The ATP-dependent revolution exhibited stochastic fluctuation and was driven by conformation transmission of the beta subunit (phosphate-binding P-loop/alpha-helix B/loop/beta-sheet4). Recent results regarding mechanically driven ATP synthesis finally proved the role of rotation in energy coupling.

A rotor-stator cross-link in the F1-ATPase blocks the rate-limiting step of rotational catalysis

The F(0)F(1)-ATP synthase couples the functions of H(+) transport and ATP synthesis/hydrolysis through the efficient transmission of energy mediated by rotation of the centrally located gamma, epsilon, and c subunits. To understand the gamma subunit role in the catalytic mechanism, we previously determined the partial rate constants and devised a minimal kinetic model for the rotational hydrolytic mode of the F(1)-ATPase enzyme that uniquely fits the pre-steady state and steady state data ( Baylis Scanlon, J. A., Al-Shawi, M. K., Le, N. P., and Nakamoto, R. K. (2007) Biochemistry 46, 8785-8797 ). Here we directly test the model using two single cysteine mutants, betaD380C and betaE381C, which can be used to reversibly inhibit rotation upon formation of a cross-link with the conserved gammaCys-87. In the pre-steady state, the gamma-beta cross-linked enzyme at high Mg.ATP conditions retained the burst of hydrolysis but was not able to release P(i). These data show that the rate-limiting rotation step, k(gamma), occurs after hydrolysis and before P(i) release. This analysis provides additional insights into how the enzyme achieves efficient coupling and implicates the betaGlu-381 residue for proper formation of the rate-limiting transition state involving gamma subunit rotation.

Rotational catalysis of Escherichia coli ATP synthase F1 sector. Stochastic fluctuation and a key domain of the beta subunit

A complex of gamma, epsilon, and c subunits rotates in ATP synthase (FoF(1)) coupled with proton transport. A gold bead connected to the gamma subunit of the Escherichia coli F(1) sector exhibited stochastic rotation, confirming a previous study (Nakanishi-Matsui, M., Kashiwagi, S., Hosokawa, H., Cipriano, D. J., Dunn, S. D., Wada, Y., and Futai, M. (2006) J. Biol. Chem. 281, 4126-4131). A similar approach was taken for mutations in the beta subunit key region; consistent with its bulk phase ATPase activities, F(1) with the Ser-174 to Phe substitution (betaS174F) exhibited a slower single revolution time (time required for 360 degree revolution) and paused almost 10 times longer than the wild type at one of the three 120 degrees positions during the stepped revolution. The pause positions were probably not at the "ATP waiting" dwell but at the "ATP hydrolysis/product release" dwell, since the ATP concentration used for the assay was approximately 30-fold higher than the K(m) value for ATP. A betaGly-149 to Ala substitution in the phosphate binding P-loop suppressed the defect of betaS174F. The revertant (betaG149A/betaS174F) exhibited similar rotation to the wild type, except that it showed long pauses less frequently. Essentially the same results were obtained with the Ser-174 to Leu substitution and the corresponding revertant betaG149A/betaS174L. These results indicate that the domain between beta-sheet 4 (betaSer-174) and P-loop (betaGly-149) is important to drive rotation.

Our research on proton pumping ATPases over three decades: their biochemistry, molecular biology and cell biology

ATP is synthesized by F-type proton-translocating ATPases (F-ATPases) coupled with an electrochemical proton gradient established by an electron transfer chain. This mechanism is ubiquitously found in mitochondria, chloroplasts and bacteria. Vacuolar-type ATPases (V-ATPases) are found in endomembrane organelles, including lysosomes, endosomes, synaptic vesicles, etc., of animal and plant cells. These two physiologically different proton pumps exhibit similarities in subunit assembly, catalysis and the coupling mechanism from chemistry to proton transport through subunit rotation. We mostly discuss our own studies on the two proton pumps over the last three decades, including ones on purification, kinetic analysis, rotational catalysis and the diverse roles of acidic luminal organelles. The diversity of organellar proton pumps and their stochastic fluctuation are the important concepts derived recently from our studies.

Selective assembly of V-ATPase subunit isoforms in mouse kidney

The kidney plays vital roles in acid-base homeostasis, and the reabsorption of water, ions, and proteins. These processes are achieved through acidification of urine and endosomes of proximal tubule epithelial cells. Multisubunit vacuolar-type proton ATPase (V-ATPase) is one of the major acidification-machinery proteins that localizes to the apical or basolateral plasma membranes of intercalated cells in collecting ducts and the endosomal region at the base of brush border microvilli in proximal tubules. Multiple subunit isoforms of V-ATPase, which are expressed in kidney, have been identified. One obvious question is whether the pumps at different locations in the kidney have their own unique subunit identities. We have used a combination of methods to study this enzyme in kidney including immunocytochemical staining and immunoprecipitation analyses. The subunit isoforms of V-ATPase exhibited selective association/assembly in kidney: kidney-specific isoforms predominantly formed the intercalated cell proton pump, whereas the pump located in the brush border comprised ubiquitously expressed counterparts.

Stochastic high-speed rotation of Escherichia coli ATP synthase F1 sector: the epsilon subunit-sensitive rotation

The gamma subunit of the ATP synthase F(1) sector rotates at the center of the alpha(3)beta(3) hexamer during ATP hydrolysis. A gold bead (40-200 nm diameter) was attached to the gamma subunit of Escherichia coli F(1), and then its ATP hydrolysis-dependent rotation was studied. The rotation speeds were variable, showing stochastic fluctuation. The high-speed rates of 40- and 60-nm beads were essentially similar: 721 and 671 rps (revolutions/s), respectively. The average rate of 60-nm beads was 381 rps, which is approximately 13-fold faster than that expected from the steady-state ATPase turnover number. These results indicate that the F(1) sector rotates much faster than expected from the bulk of ATPase activity, and that approximately 10% of the F(1) molecules are active on the millisecond time scale. Furthermore, the real ATP turnover number (number of ATP molecules converted to ADP and phosphate/s), as a single molecule, is variable during a short period. The epsilon subunit inhibited rotation and ATPase, whereas epsilon fused through its carboxyl terminus to cytochrome b(562) showed no effect. The epsilon subunit significantly increased the pausing time during rotation. Stochastic fluctuation of catalysis may be a general property of an enzyme, although its understanding requires combining studies of steady-state kinetics and single molecule observation.

ATP-dependent rotation of mutant ATP synthases defective in proton transport

During ATP hydrolysis, the gammaepsilon c10 complex (gamma and epsilon subunits and a c subunit ring formed from 10 monomers) of F0F1 ATPase (ATP synthase) rotates relative to the alpha3beta3delta ab2 complex, leading to proton transport through the interface between the a subunit and the c subunit ring. In this study, we replaced the two pertinent residues for proton transport, cAsp-61 and aArg-210 of the c and a subunits, respectively. The mutant enzymes exhibited lower ATPase activities than that of the wild type but exhibited ATP-dependent rotation in planar membranes, in which their original assemblies are maintained. The mutant enzymes were defective in proton transport, as shown previously. These results suggest that proton transport can be separated from rotation in ATP hydrolysis, although rotation ensures continuous proton transport by bringing the cAsp-61 and aArg-210 residues into the correct interacting positions.

Expression of bovine F1-ATPase with functional complementation in yeast Saccharomyces cerevisiae

The mitochondrial F(1)F(0)-ATP synthase is a multimeric enzyme complex composed of at least 16 unique peptides with an overall molecular mass of approximately 600 kDa. F(1)-ATPase is composed of alpha(3)beta(3)gammadeltaepsilon with an overall molecular mass of 370 kDa. The genes encoding bovine F(1)-ATPase have been expressed in a quintuple yeast Saccharomyces cerevisiae deletion mutant (DeltaalphaDeltabetaDeltagammaDeltadeltaDeltaepsilon). This strain expressing bovine F(1) is unable to grow on medium containing a non-fermentable carbon source (YPG), indicating that the enzyme is non-functional. However, daughter strains were easily selected for growth on YPG medium and these were evolved for improved growth on YPG medium. The evolution of the strains was presumably due to mutations, but mutations in the genes encoding the subunits of the bovine F(1)-ATPase were not required for the ability of the cell to grow on YPG medium. The bovine enzyme expressed in yeast was partially purified to a specific activity of about half of that of the enzyme purified from bovine heart mitochondria. These results indicate that the molecular machinery required for the assembly of the mitochondrial ATP synthase is conserved from bovine and yeast and suggest that yeast may be useful for the expression, mutagenesis, and analysis of the mammalian F(1)- or F(1)F(0)-ATP synthase.

ATP synthase from Saccharomyces cerevisiae: location of subunit h in the peripheral stalk region

Subunit h is a component of the peripheral stalk region of ATP synthase from Saccharomyces cerevisiae. It is weakly homologous to subunit F6 in the bovine enzyme, and F6 can replace the function of subunit h in a yeast strain from which the gene for subunit h has been deleted. The removal of subunit h (or F6) uncouples ATP synthesis from the proton motive force. A biotinylation signal has been introduced following the C terminus of subunit h. It becomes biotinylated in vivo, and allows avidin to be bound quantitatively to the purified enzyme complex in vitro. By electron microscopy of the ATP synthase-avidin complex in negative stain and by subsequent image analysis, the C terminus of subunit h has been located in a region of the peripheral stalk that is close to the Fo membrane domain of ATP synthase. Models of the peripheral stalk are proposed that are consistent with this location and with reconstitution experiments conducted with isolated peripheral stalk subunits.

Defined Sites of Interaction between Subunits E (Vma4p), C (Vma5p), and G (Vma10p) within the Stator Structure of the Vacuolar H+-ATPase†

Vacuolar H(+)-ATPases (V-ATPases) are multi-subunit membrane proteins that couple ATP hydrolysis to the extrusion of protons from the cytoplasm. Although they share a common macromolecular architecture and rotational mechanism with the F(1)F(0)-ATPases, the organization of many of the specialized V-ATPase subunits within this rotary molecular motor remains uncertain. In this study, we have identified sequence segments involved in linking putative stator subunits in the Saccharomyces V-ATPase. Precipitation assays revealed that subunits Vma5p (subunit C) and Vma10p (subunit G), expressed as glutathione-S-transferase fusion proteins in E. coli, are both able to interact strongly with Vma4p (subunit E) expressed in a cell-free system. GST-Vma10p also associated with Vma2p and Vma1p, the core subunits of the ATP-hydrolyzing domain, and was able to self-associate to form a dimer. Mutations within the first 19-residue region of Vma4p, which disrupted interaction with Vma5p in vitro, also prevented the Vma4p polypeptide from restoring V-ATPase function in a complementation assay in vivo. These mutations did not prevent assembly of Vma5p (subunit C) and Vma2p (subunit B) into an inactive complex at the vacuolar membrane, indicating that Vma5p must make multiple interactions involving other V-ATPase subunits. A second, highly conserved region of Vma4p between residues 19 and 38 is involved in binding Vma10p. This region is highly enriched in charged residues, suggesting a role for electrostatic effects in Vma4p-Vma10p interaction. These protein interaction studies show that the N-terminal region of Vma4p is a key factor not only in the stator structure of the V-ATPase rotary molecular motor, but also in mediating interactions with putative regulatory subunits.

ATP-driven stepwise rotation of FoF1-ATP synthase

FoF1-ATP synthase (FoF1) is a motor enzyme that couples ATP synthesis/hydrolysis with a transmembrane proton translocation. F1, a water-soluble ATPase portion of FoF1, rotates by repeating ATP-waiting dwell, 80 degrees substep rotation, catalytic dwell, and 40 degrees -substep rotation. Compared with F1, rotation of FoF1 has yet been poorly understood, and, here, we analyzed ATP-driven rotations of FoF1. Rotation was probed with an 80-nm bead attached to the ring of c subunits in the immobilized FoF1 and recorded with a submillisecond fast camera. The rotation rates at various ATP concentrations obeyed the curve defined by a Km of approximately 30 microM and a Vmax of approximately 350 revolutions per second (at 37 degrees C). At low ATP, ATP-waiting dwell was seen and the kon-ATP was estimated to be 3.6 x 10(7) M(-1) x s(-1). At high ATP, fast, poorly defined stepwise motions were observed that probably reflect the catalytic dwells. When a slowly hydrolyzable substrate, adenosine 5'-[gamma-thio]triphosphate, was used, the catalytic dwells consisting of two events were seen more clearly at the angular position of approximately 80 degrees . The rotational behavior of FoF1 resembles that of F1. This finding indicates that "friction" in Fo motor is negligible during the ATP-driven rotation. Tributyltin chloride, a specific inhibitor of proton translocation, slowed the rotation rate by 96%. However, dwells at clearly defined angular positions were not observed under these conditions, indicating that inhibition by tributyltin chloride is complex.

Insights into the molecular mechanism of rotation in the Fo sector of ATP synthase

F(1)F(o)-ATP synthase is a ubiquitous membrane protein complex that efficiently converts a cell's transmembrane proton gradient into chemical energy stored as ATP. The protein is made of two molecular motors, F(o) and F(1), which are coupled by a central stalk. The membrane unit, F(o), converts the transmembrane electrochemical potential into mechanical rotation of a rotor in F(o) and the physically connected central stalk. Based on available data of individual components, we have built an all-atom model of F(o) and investigated through molecular dynamics simulations and mathematical modeling the mechanism of torque generation in F(o). The mechanism that emerged generates the torque at the interface of the a- and c-subunits of F(o) through side groups aSer-206, aArg-210, and aAsn-214 of the a-subunit and side groups cAsp-61 of the c-subunits. The mechanism couples protonation/deprotonation of two cAsp-61 side groups, juxtaposed to the a-subunit at any moment in time, to rotations of individual c-subunit helices as well as rotation of the entire c-subunit. The aArg-210 side group orients the cAsp-61 side groups and, thereby, establishes proton transfer via aSer-206 and aAsn-214 to proton half-channels, while preventing direct proton transfer between the half-channels. A mathematical model proves the feasibility of torque generation by the stated mechanism against loads typical during ATP synthesis; the essential model characteristics, e.g., helix and subunit rotation and associated friction constants, have been tested and furnished by steered molecular dynamics simulations.

Escherichia coli glutamate- and arginine-dependent acid resistance systems increase internal pH and reverse transmembrane potential

Due to the acidic nature of the stomach, enteric organisms must withstand extreme acid stress for colonization and pathogenesis. Escherichia coli contains several acid resistance systems that protect cells to pH 2. One acid resistance system, acid resistance system 2 (AR2), requires extracellular glutamate, while another (AR3) requires extracellular arginine. Little is known about how these systems protect cells from acid stress. AR2 and AR3 are thought to consume intracellular protons through amino acid decarboxylation. Antiport mechanisms then exchange decarboxylation products for new amino acid substrates. This form of proton consumption could maintain an internal pH (pHi) conducive to cell survival. The model was tested by estimating the pHi and transmembrane potential (DeltaPsi) of cells acid stressed at pH 2.5. During acid challenge, glutamate- and arginine-dependent systems elevated pHi from 3.6 to 4.2 and 4.7, respectively. However, when pHi was manipulated to 4.0 in the presence or absence of glutamate, only cultures challenged in the presence of glutamate survived, indicating that a physiological parameter aside from pHi was also important. Measurements of DeltaPsi indicated that amino acid-dependent acid resistance systems help convert membrane potential from an inside negative to inside positive charge, an established acidophile strategy used to survive extreme acidic environments. Thus, reversing DeltaPsi may be a more important acid resistance strategy than maintaining a specific pHi value.

Vacuolar H+ pumping ATPases in luminal acidic organelles and extracellular compartments: common rotational mechanism and diverse physiological roles

Cytoplasmic organelles with an acidic luminal pH include vacuoles, coated vesicles, lysosomes, the Golgi apparatus, and synaptic vesicles. Acidic compartments are also known outside specialized cells such as osteoclasts. The unique acidic pH is formed by V-ATPase (Vacuolar type ATPase), other ion transporters, and the buffering action of proteins inside the organelles. V-ATPase hydrolyzes ATP and transports protons inside an organelle or extracellular compartment. We have summarized recent progress on mouse V-ATPases and their varying localizations together with their mechanism emphasizing similarities with F-type ATPases.

Proton pumping ATPases and diverse inside-acidic compartments

Proton-translocating ATPases are essential cellular energy converters that transduce the chemical energy of ATP hydrolysis into transmembrane proton electrochemical potential differences. The structures, catalytic mechanism, and cellular functions of three major classes of ATPases including the F-type, V-type, and P-type ATPase are discussed in this review. Physiological roles of the acidic organelles and compartments contained are also discussed.

Mechanics of coupling proton movements to c-ring rotation in ATP synthase

F1F0 ATP synthases generate ATP by a rotary catalytic mechanism in which H+ transport is coupled to rotation of an oligomeric ring of c subunits extending through the membrane. Protons bind to and then are released from the aspartyl-61 residue of subunit c at the center of the membrane. Subunit a of the F0 sector is thought to provide proton access channels to and from aspartyl-61. Here, we summarize new information on the structural organization of Escherichia coli subunit a and the mapping of aqueous-accessible residues in the second, fourth and fifth transmembrane helices (TMHs). Aqueous-accessible regions of these helices extend to both the cytoplasmic and periplasmic surface. We propose that aTMH4 rotates to alternately expose the periplasmic or cytoplasmic half-channels to aspartyl-61 of subunit c during the proton transport cycle. The concerted rotation of interacting helices in subunit a and subunit c is proposed to be the mechanical force driving rotation of the c-rotor, using a mechanism akin to meshed gears.

Mouse proton pump ATPase C subunit isoforms (C2-a and C2-b) specifically expressed in kidney and lung

The vacuolar-type H+-ATPases (V-ATPases) are multimeric proton pumps involved in a wide variety of physiological processes. We have identified two alternative splicing variants of C2 subunit isoforms: C2-a, a lung-specific isoform containing a 46-amino acid insertion, and C2-b, a kidney-specific isoform without the insert. Immunohistochemistry with isoform-specific antibodies revealed that V-ATPase with C2-a is localized specifically in lamellar bodies of type II alveolar cells, whereas the C2-b isoform is found in the plasma membranes of renal alpha and beta intercalated cells. Immunoprecipitation combined with immunohistological analysis revealed that C2-b together with other kidney-specific isoforms was selectively assembled to form a unique proton pump in intercalated cells. Furthermore, a chimeric yeast V-ATPase with mouse the C2-a or C2-b isoform showed a lower Km(ATP) and lower proton transport activity than that with C1 or Vma5p (yeast C subunit). These results suggest that V-ATPases with the C2-a and C2-b isoform are involved in luminal acidification of lamellar bodies and regulation of the renal acid-base balance, respectively.

Subunit rotation of vacuolar-type proton pumping ATPase: relative rotation of the G and C subunits

Vacuolar-type ATPases V1V0 (V-ATPases) are found ubiquitously in the endomembrane organelles of eukaryotic cells. In this study, we genetically introduced a His tag and a biotin tag onto the c and G subunits, respectively, of Saccharomyces cerevisiae V-ATPase. Using this engineered enzyme, we observed directly the continuous counter-clockwise rotation of an actin filament attached to the G subunit when the enzyme was immobilized on a glass surface through the c subunit. V-ATPase generated essentially the same torque as the F-ATPase (ATP synthase). The rotation was inhibited by concanamycin and nitrate but not by azide. These results demonstrated that the V- and F-ATPase carry out a common rotational catalysis.

ATP synthesis driven by proton transport in F1F0-ATP synthase

Topical questions in ATP synthase research are: (1) how do protons cause subunit rotation and how does rotation generate ATP synthesis from ADP+Pi? (2) How does hydrolysis of ATP generate subunit rotation and how does rotation bring about uphill transport of protons? The finding that ATP synthase is not just an enzyme but rather a unique nanomotor is attracting a diverse group of researchers keen to find answers. Here we review the most recent work on rapidly developing areas within the field and present proposals for enzymatic and mechanoenzymatic mechanisms.

ATP synthases: insights into their motor functions from sequence and structural analyses

ATP synthases are motor complexes comprised of F0 and F1 parts that couple the proton gradient across the membrane to the synthesis of ATP by rotary catalysis. Although a great deal of information has been accumulated regarding the structure and function of ATP synthases, their motor functions are not fully understood. For this reason, we performed the alignments and analyses of the protein sequences comprising the core of the ATP synthase motor complex, and examined carefully the locations of the conserved residues in the subunit structures of ATP synthases. A summary of the findings from this bioinformatic study is as follows. First, we found that four conserved regions in the sequence of gamma subunit are clustered into three patches in its structure. The interactions of these conserved patches with the alpha and beta subunits are likely to be critical for energy coupling and catalytic activity of the ATP synthase. Second, we located a four-residue cluster at the N-terminal domain of mitochondrial OSCP or bacterial (or chloroplast) delta subunit which may be critical for the binding of these subunits to F1. Third, from the localizations of conserved residues in the subunits comprising the rotors of ATP synthases, we suggest that the conserved interaction site at the interface of subunit c and delta (mitochondria) or epsilon (bacteria and chloroplasts) may be important for connecting the rotor of F1 to the rotor of F0. Finally, we found the sequence of mitochondrial subunit b to be highly conserved, significantly longer than bacterial subunit b, and to contain a shorter dimerization domain than that of the bacterial protein. It is suggested that the different properties of mitochondrial subunit b may be necessary for interaction with other proteins, e.g., the supernumerary subunits.

Subunit rotation of ATP synthase embedded in membranes: a or beta subunit rotation relative to the c subunit ring

ATP synthase F(o)F(1) (alpha(3)beta(3)gammadelta epsilon ab(2)c(10-14)) couples an electrochemical proton gradient and a chemical reaction through the rotation of its subunit assembly. In this study, we engineered F(o)F(1) to examine the rotation of the catalytic F(1) beta or membrane sector F(o) a subunit when the F(o) c subunit ring was immobilized; a biotin-tag was introduced onto the beta or a subunit, and a His-tag onto the c subunit ring. Membrane fragments were obtained from Escherichia coli cells carrying the recombinant plasmid for the engineered F(o)F(1) and were immobilized on a glass surface. An actin filament connected to the beta or a subunit rotated counterclockwise on the addition of ATP, and generated essentially the same torque as one connected to the c ring of F(o)F(1) immobilized through a His-tag linked to the alpha or beta subunit. These results established that the gamma epsilon c(10-14) and alpha(3)beta(3)deltaab(2) complexes are mechanical units of the membrane-embedded enzyme involved in rotational catalysis.

Structural model of the transmembrane Fo rotary sector of H+-transporting ATP synthase derived by solution NMR and intersubunit cross-linking in situ

H(+)-transporting, F(1)F(o)-type ATP synthases utilize a transmembrane H(+) potential to drive ATP formation by a rotary catalytic mechanism. ATP is formed in alternating beta subunits of the extramembranous F(1) sector of the enzyme, synthesis being driven by rotation of the gamma subunit in the center of the F(1) molecule between the alternating catalytic sites. The H(+) electrochemical potential is thought to drive gamma subunit rotation by first coupling H(+) transport to rotation of an oligomeric rotor of c subunits within the transmembrane F(o) sector. The gamma subunit is forced to turn with the c-oligomeric rotor due to connections between subunit c and the gamma and epsilon subunits of F(1). In this essay we will review recent studies on the Escherichia coli F(o) sector. The monomeric structure of subunit c, determined by NMR, shows that subunit c folds in a helical hairpin with the proton carrying Asp(61) centered in the second transmembrane helix (TMH). A model for the structural organization of the c(10) oligomer in F(o) was deduced from extensive cross-linking studies and by molecular modeling. The model indicates that the H(+)-carrying carboxyl of subunit c is occluded between neighboring subunits of the c(10) oligomer and that two c subunits pack in a "front-to-back" manner to form the H(+) (cation) binding site. In order for protons to gain access to Asp(61) during the protonation/deprotonation cycle, we propose that the outer, Asp(61)-bearing TMH-2s of the c-ring and TMHs from subunits composing the inlet and outlet channels must turn relative to each other, and that the swiveling motion associated with Asp(61) protonation/deprotonation drives the rotation of the c-ring. The NMR structures of wild-type subunit c differs according to the protonation state of Asp(61). The idea that the conformational state of subunit c changes during the catalytic cycle is supported by the cross-linking evidence in situ, and two recent NMR structures of functional mutant proteins in which critical residues have been switched between TMH-1 and TMH-2. The structural information is considered in the context of the possible mechanism of rotary movement of the c(10) oligomer during coupled synthesis of ATP.

Differential localization of the vacuolar H+ pump with G subunit isoforms (G1 and G2) in mouse neurons

Vacuolar H(+)-ATPases (V-ATPases), a family of multimeric proton pumps, are involved in a wide variety of physiological processes. We have identified two mouse genes, Atp6g1 and Atp6g2, encoding the G1 and G2 isoforms of the V-ATPase G subunit, respectively. G1 was distributed ubiquitously in the tissues examined, whereas G2 was specifically distributed in central nervous system neurons. G1 was expressed at an early embryonic stage, whereas G2 transcription was significantly induced at 10.5 days postcoitus (embryonic day 10.5, i.e. 2 days before axon outgrowth). Both G1 and G2 were strongly expressed in cortical and hippocampal neurons, cerebellar granule cells, and Purkinje cells. Immunohistochemistry with isoform-specific antibodies revealed that G2 was localized in cell bodies, dendrites, and axons. In addition, electron microscopy and subcellular fractionation indicated that G2 was localized in synaptic vesicles, whereas G1 was not detectable. G1 and G2 exhibit 62% identity, and both isoforms were immunoprecipitated with the c and A subunits of V-ATPase. G2 could complement the yeast deletion mutant Deltavma10, which lacks the G subunit. The V-ATPases containing the G1 and G2 isoforms, respectively, showed similar K(m)((ATP)) values and maximal velocity. These results indicate that G1 and G2 are bona fide subunits of V-ATPases and that the enzyme with the G2 isoform is involved in synaptic vesicle acidification.

Coupling proton movements to c-ring rotation in F(1)F(o) ATP synthase: aqueous access channels and helix rotations at the a-c interface

F(1)F(o) ATP synthases generate ATP by a rotary catalytic mechanism in which H(+) transport is coupled to rotation of a ring of c subunits within the transmembrane sector of the enzyme. Protons bind to and then are released from the aspartyl-61 residue of subunit c at the center of the membrane. Proton access channels to and from aspartyl-61 are thought to form in subunit a of the F(o) sector. Here, we summarize new information on the structural organization of subunit a and the mapping of aqueous accessible residues in the fourth and fifth transmembrane helices (TMHs). Cysteine substituted residues, lying on opposite faces of aTMH-4, preferentially react with either N-ethyl-maleimide (NEM) or Ag(+). We propose that aTMH-4 rotates to alternately expose each helical face to aspartyl-61 of subunit c during the proton transport cycle. The concerted helical rotation of aTMH-4 and cTMH-2 are proposed to be coupled to the stepwise mechanical movement of the c-rotor.

Genetic fusions of globular proteins to the epsilon subunit of the Escherichia coli ATP synthase: Implications for in vivo rotational catalysis and epsilon subunit function

The rotational mechanism of ATP synthase was investigated by fusing three proteins from Escherichia coli, the 12-kDa soluble cytochrome b(562), the 20-kDa flavodoxin, and the 28-kDa flavodoxin reductase, to the C terminus of the epsilon subunit of the enzyme. According to the concept of rotational catalysis, because epsilon is part of the rotor a large domain added at this site should sterically clash with the second stalk, blocking rotation and fully inhibiting the enzyme. E. coli cells expressing the cytochrome b(562) fusion in place of wild-type epsilon grew using acetate as the energy source, indicating their capacity for oxidative phosphorylation. Cells expressing the larger flavodoxin or flavodoxin reductase fusions failed to grow on acetate. Immunoblot analysis showed that the fusion proteins were stable in the cells and that they had no effect on enzyme assembly. These results provide initial evidence supporting rotational catalysis in vivo. In membrane vesicles, the cytochrome b(562) fusion caused an increase in the apparent ATPase activity but a minor decrease in proton pumping. Vesicles bearing ATP synthase containing the larger fusion proteins showed reduced but significant levels of ATPase activity that was sensitive to inhibition by dicyclohexylcarbodiimide (DCCD) but no proton pumping. Thus, all fusions to epsilon generated an uncoupled component of ATPase activity. These results imply that a function of the C terminus of epsilon in F(1)F(0) is to increase the efficiency of the enzyme by specifically preventing the uncoupled hydrolysis of ATP. Given the sensitivity to DCCD, this uncoupled ATP hydrolysis may arise from rotational steps of gammaepsilon in the inappropriate direction after ATP is bound at the catalytic site. It is proposed that the C-terminal domain of epsilon functions to ensure that rotation occurs only in the direction of ATP synthesis when ADP is bound and only in the direction of hydrolysis when ATP is bound.

Structure of Ala24/Asp61 --> Asp24/Asn61 substituted subunit c of Escherichia coli ATP synthase: implications for the mechanism of proton transport and rotary movement in the F0 complex

The structure of the A24D/D61N substituted subunit c of Escherichia coli ATP synthase, in which the essential carboxylate has been switched from residue 61 of the second transmembrane helix (TMH) to residue 24 of the first TMH, has been determined by heteronuclear multidimensional NMR in a monophasic chloroform/methanol/water (4:4:1) solvent mixture. As in the case of the wild-type protein, A24D/D61N substituted subunit c forms a hairpin of two extended alpha-helices (residues 5-39 and 46-78), with residues 40-45 forming a connecting loop at the center of the protein. The structure was determined at pH 5, where Asp24 is fully protonated. The relative orientation of the two extended helices in the A24D/D61N structure is different from that in the protonated form of the wild-type protein, also determined at pH 5. The C-terminal helix is rotated by 150 degrees relative to the wild-type structure, and the N-terminal helix is rotated such that the essential Asp24 carboxyl group packs on the same side of the molecule as Asp61 in the wild-type protein. The changes in helix-helix orientation lead to a structure that is quite similar to that of the deprotonated form of wild-type subunit c, determined at pH 8. When a decameric ring of c subunits was modeled from the new structure, the Asp24 carboxyl group was found to pack in a cavity at the interface between two subunits that is similar to the cavity in which Asp61 of the wild-type protein is predicted to pack. The interacting faces of the packed subunits in this model are also similar to those in the wild-type model. The results provide further evidence that subunit c is likely to fold in at least two conformational states differing most notably in the orientation of the C-terminal helix. Based upon the structure, a mechanistic model is discussed that indicates how the wild-type and A24D/D61N subunits could utilize similar helical movements during H(+) transport-coupled rotation of the decameric c ring.

The molecular mechanism of ATP synthesis by F1F0-ATP synthase

ATP synthesis by oxidative phosphorylation and photophosphorylation, catalyzed by F1F0-ATP synthase, is the fundamental means of cell energy production. Earlier mutagenesis studies had gone some way to describing the mechanism. More recently, several X-ray structures at atomic resolution have pictured the catalytic sites, and real-time video recordings of subunit rotation have left no doubt of the nature of energy coupling between the transmembrane proton gradient and the catalytic sites in this extraordinary molecular motor. Nonetheless, the molecular events that are required to accomplish the chemical synthesis of ATP remain undefined. In this review we summarize current state of knowledge and present a hypothesis for the molecular mechanism of ATP synthesis.

ATP synthase F(1) sector rotation. Defective torque generation in the beta subunit Ser-174 to Phe mutant and its suppression by second mutations

Subunit gamma of the ATP synthase F(1) sector is located at the center of the alpha(3)beta(3) hexamer and rotates unidirectionally during ATP hydrolysis, generating the rotational torque of approximately 45 pN.nm. A mutant F(1) with the betaSer-174 to Phe substitution (betaS174F) in the beta subunit generated lower torque ( approximately 17 pN.nm), indicating that betaS174F is mechanically defective, the first such mutant reported. The defective rotation of betaS174F was suppressed by a second-site mutation, betaGly-149 to Ala, betaIle-163 to Ala, or betaIle-166 to Ala in the same subunit, but not by betaLeu-238 to Ala. These results suggest that the region between betaGly-149 and betaSer-174 plays an important role in the coupling between ATP hydrolysis and mechanical work.

Inter-subunit rotation and elastic power transmission in F0F1-ATPase

ATP synthase (F-ATPase) produces ATP at the expense of ion-motive force or vice versa. It is composed from two motor/generators, the ATPase (F1) and the ion translocator (F0), which both are rotary steppers. They are mechanically coupled by 360 degrees rotary motion of subunits against each other. The rotor, subunits gamma(epsilon)C10-14, moves against the stator, (alphabeta)3delta(ab2). The enzyme copes with symmetry mismatch (C3 versus C10-14) between its two motors, and it operates robustly in chimeric constructs or with drastically modified subunits. We scrutinized whether an elastic power transmission accounts for these properties. We used the curvature of fluorescent actin filaments, attached to the rotating c ring, as a spring balance (flexural rigidity of 8.10(-26) N x m2) to gauge the angular profile of the output torque at F0 during ATP hydrolysis by F1. The large average output torque (56 pN nm) proved the absence of any slip. Angular variations of the torque were small, so that the output free energy of the loaded enzyme decayed almost linearly over the angular reaction coordinate. Considering the three-fold stepping and high activation barrier (>40 kJ/mol) of the driving motor (F1) itself, the rather constant output torque seen by F0 implied a soft elastic power transmission between F1 and F0. It is considered as essential, not only for the robust operation of this ubiquitous enzyme under symmetry mismatch, but also for a high turnover rate under load of the two counteracting and stepping motors/generators.