Recognition of phospholipids in Streptomyces phospholipase D

The catalytic and structural basis of archaeal glycerophospholipid biosynthesis

Archaeal glycerophospholipids are the main constituents of the cytoplasmic membrane in the archaeal domain of life and fundamentally differ in chemical composition compared to bacterial phospholipids. They consist of isoprenyl chains ether-bonded to glycerol-1-phosphate. In contrast, bacterial glycerophospholipids are composed of fatty acyl chains ester-bonded to glycerol-3-phosphate. This largely domain-distinguishing feature has been termed the “lipid-divide”. The chemical composition of archaeal membranes contributes to the ability of archaea to survive and thrive in extreme environments. However, ether-bonded glycerophospholipids are not only limited to extremophiles and found also in mesophilic archaea. Resolving the structural basis of glycerophospholipid biosynthesis is a key objective to provide insights in the early evolution of membrane formation and to deepen our understanding of the molecular basis of extremophilicity. Many of the glycerophospholipid enzymes are either integral membrane proteins or membrane-associated, and hence are intrinsically difficult to study structurally. However, in recent years, the crystal structures of several key enzymes have been solved, while unresolved enzymatic steps in the archaeal glycerophospholipid biosynthetic pathway have been clarified providing further insights in the lipid-divide and the evolution of early life.

Switching the substrate specificity of lysoplasmalogen-specific phospholipase D

Lysoplasmalogen‐specific phospholipase D (LyPls‐PLD) catalyzes reactions in a manner similar to those catalyzed by glycerophosphodiester phosphodiesterase (GDPD) and other well‐known PLDs. Although these enzymes hydrolyze the glycerophosphodiester bond, their substrate specificities are completely different. Previously, we reported that LyPls‐PLD from Thermocrispum sp. RD004668 shows only 53% activity with 1‐hexadecyl‐2‐hydroxy‐sn‐glycero‐3‐phosphocholine (LysoPAF) relative to the 100% activity it shows with choline lysoplasmalogen (LyPlsCho). Lipoprotein‐associated phospholipase A₂ (Lp‐PLA₂) activity can be used to evaluate for cardiovascular disease. Hence, development of a point‐of‐care testing kit requires a LysoPAF‐specific PLD (LysoPAF‐PLD) to measure Lp‐PLA₂ activity. Rational site‐directed mutagenesis and kinetic analysis were applied to generate LysoPAF‐PLD from LyPls‐PLD and to clarify the mechanisms underlying the substrate‐recognition ability of LyPls‐PLD. Our results suggest that LyPls‐PLD variants A47, M71, N173, F211, and W282 are possibly involved in substrate recognition and that F211L may substantially alter substrate preference. Moreover, the specific activity ratio LysoPAF/LyPlsCho corresponding to F211L was up to 25‐fold higher than that corresponding to the wild‐type enzyme. Thus, we succeeded in switching from LyPlsCho‐ to LysoPAF‐PLD. These results suggest that the F211L variant may be utilized to measure Lp‐PLA₂ activity. Kinetic analyses demonstrated that product release was the rate‐limiting step of the reaction, with flexibility of the sn‐1 ether‐linked vinyl/alkyl chain of the substrate being essential for substrate binding and product release. Our findings may lead to a better understanding of the differences between homologous enzymes (such as PLD, sphingomyelinase D, and GDPD of the phosphatidylinositol‐phosphodiesterase superfamily) in relation to substrate recognition.

Enzyme

EC 3.1.4.2 (currently assigned).

Structural insights into phospholipase D function

Phospholipase D (PLD) and its metabolic active product phosphatidic acid (PA) engage in a wide range of physiopathologic processes in the cell. PLDs have been considered as a potential and promising drug target. Recently, the crystal structures of PLDs in mammalian and plant have been solved at atomic resolution. These achievements allow us to understand the structural differences among different species of PLDs and the functions of their key domains. In this review, we summarize the sequence and structure of different species of PLD isoforms, and discuss the structural mechanisms for PLD interactions with their binding partners and the functions of each key domain in the regulation of PLDs activation and catalytic reaction.

Phospholipase D as a catalyst: application in phospholipid synthesis, molecular structure and protein engineering

Phospholipase D (PLD) is a useful enzyme for its transphosphatidylation activity, which enables the enzymatic synthesis of various phospholipids (PLs). Many reports exist on PLD-mediated synthesis of natural and tailor-made PLs with functional head groups, from easily available lecithin or phosphatidylcholine. Early studies on PLD-mediated synthesis mainly employed enzymes of plant origin, which were later supplanted by ones from microorganisms, especially actinomycetes. Many PLDs are members of the PLD superfamily, having one or two copies of a signature sequence, HxKxxxxD or HKD motif, in the primary structures. PLD superfamily members share a common core structure, and thereby, a common catalytic mechanism. The catalysis proceeds via two-step reaction with the formation of phosphatidyl-enzyme intermediate. Both of the two catalytic His residues are critical in the reaction course, where one acts as a nucleophile, while the other functions as a general acid/base. PLD is being engineered to improve its activity and stability, alter head group specificity and further identify catalytically important residues. Since the knowledge on PLD enzymology is constantly expanding, this review focuses on recent advances in the field, regarding PLD-catalyzed synthesis of bioactive PLs, deeper understanding of substrate recognition and binding mechanism, altering substrate specificity, and improving thermostability. We introduced some of our recent results in combination with existing facts to further deepen the story on the nature of this useful enzyme.

Molecular dissection of Streptomyces trypsin on substrate recognition

We recently identified residue 71 of two homologous serine proteases from Streptomyces omiyaensis (SOT) and Streptomyces griseus (SGT) as a crucial residue for differences in their topological specificities, i.e. recognition of a distinct three-dimensional structure. To study the role of this key residue in substrate recognition, we used surface plasmon resonance analysis to evaluate the affinities of inactive mutants, in which residues 71 of SOT and SGT were substituted respectively with Leu and Tyr, toward different types of collagens. We identified another amino acid residue involved in the interaction with collagens from analyses of inactive chimeras between SOT and SGT using an in vivo DNA shuffling system. Results showed that residue 72 contributes to collagen binding. By substituting Leu71 and Gln72 with Tyr and Arg, respectively, SGT mutant showed a change in topological specificity and high hydrolytic activity toward type IV collagen comparable to SOT. We demonstrated that the neighboring residues 71 and 72 in the N-terminal β-barrel domain of the enzyme synergistically play an important role in substrate recognition.

The role of Tyr71 in Streptomyces trypsin on the recognition mechanism of structural protein substrates

Studies of substrate recognition by serine proteases have focused on specificities at the primary S1-Sn sites, but topological specificities (i.e. recognition at distinct three-dimensional structural motifs) have not been established. This is the first report to identify the key amino acid residue conferring topological specificity. A serine protease from Streptomyces omiyaensis (SOT), which is a trypsin-like enzyme, was chosen as a model enzyme to clarify the recognition mechanism of structural protein substrates in serine proteases. We have found previously that the topological specificities of SOT and S. griseus trypsin (SGT) for high molecular mass substrates differ greatly, even though the enzymes have similar primary structures. In this study, we constructed chimeras between SOT and SGT using an in vivo DNA shuffling system and several mutants to identify the key residues involved in topological specificities. By comparing the substrate specificities of chimeras and mutants, we found that residue 71 of SOT, which is separate from the catalytic triad, contributes to the topological specificity. Using site-directed mutagenesis, residue 71 of SOT was also found to be crucial for catalytic efficiency and enzyme conformation.

Phospholipase D mechanism using Streptomyces PLD

Phospholipase D (PLD) plays various roles in important biological processes and physiological functions, including cell signaling. Streptomyces PLDs show significant sequence similarity and belong to the PLD superfamily containing two catalytic HKD motifs. These PLDs have conserved catalytic regions and are among the smallest PLD enzymes. Therefore, Streptomyces PLDs are thought to be suitable models for studying the reaction mechanism among PLDs from other sources. Furthermore, Streptomyces PLDs present advantages related to their broad substrate specificity and ease of enzyme preparation. Moreover, the tertiary structure of PLD has been elucidated only for PLD from Streptomyces sp. PMF. This article presents a review of recently reported studies of the mechanism of the catalytic reaction, substrate recognition, substrate specificity and stability of Streptomyces PLD using various protein engineering methods and surface plasmon resonance analysis.

A novel low molecular weight phospholipase D from Streptomyces sp. CS684

With the aim of isolating economically viable enzymes from a microbial source, a novel phospholipase D (PLD) was purified from Streptomyces sp. CS684 (PLD(684)). PLD(684) had molecular weight of 29 kDa, which makes it the second smallest PLD reported so far. The enzyme activity was optimum at pH 6 and 45 degrees C, and enhanced by various detergents. It was stable from pH 7 to 9 and at or below 45 degrees C when assayed after 40 h and 2h, respectively. The K(m) and V(max) values for phosphatidylcholine were 1.16 mM and 1453.74 micromol min(-1)mg(-1), respectively. It catalyzed the transphosphatidylation of glycerol, but not that of l-serine, myo-inositol or ethanolamine. Low molecular weight PLD(684) with transphosphatidylation activity may be utilized in the industrial production of rare and commercially important phospholipids.

Effect of salt on the activity of Streptomyces prolyl aminopeptidase

A salt-tolerant prolyl aminopeptidase from Streptomyces aureofaciens TH-3 (TH-3PAP) was purified from a culture supernatant. The gene encoding TH-3PAP was cloned and sequenced. The primary structure of TH-3PAP showed 65% identity with that of PAP from Streptomyces lividans (SLPAP) and possessed a conserved catalytic motif, GxSxGG, which is conserved in the alpha/beta hydrolase fold family. The characterization of the recombinants TH-3PAP and SLPAP indicated a difference: in 4.0 M NaCl, TH-3PAP showed enzyme activity, whereas SLPAP was inactive. Next, we constructed chimeras between TH-3PAP and SLPAP using an in vivo DNA shuffling system and a sandwich chimera (sc-PAP), whose region from 63 to 78 amino acids of TH-3PAP was substituted with that of SLPAP. Comparison of the biochemical properties between TH-3PAP and the salt-sensitive sc-PAP suggested that the fine tuning of the N-terminal conformation of TH-3PAP by hydrophobic interaction is important for the salt tolerance mechanism of the enzyme.

Sensor of phospholipids in Streptomyces phospholipase D

Recently, we identified Ala426 and Lys438 of phospholipase D from Streptomyces septatus TH-2 (TH-2PLD) as important residues for activity, stability and selectivity in transphosphatidylation. These residues are located in a C-terminal flexible loop separate from two catalytic HxKxxxxD motifs. To study the role of these residues in substrate recognition, we evaluated the affinities of inactive mutants, in which these residues were substituted with Phe and His, toward several phospholipids by SPR analysis. By substituting Ala426 and Lys438 with Phe and His, respectively, the inactive mutant showed a much stronger interaction with phosphatidylcholine and a weaker interaction with phosphatidylglycerol than the inactive TH-2PLD mutant. We demonstrated that Ala426 and Lys438 of TH-2PLD play a role in sensing the head group of phospholipids.

C-terminal loop of Streptomyces phospholipase D has multiple functional roles

We have recently shown that two flexible loops of Streptomyces phospholipase D (PLD) affect the catalytic reaction of the enzyme by a comparative study of chimeric PLDs. Gly188 and Asp191 of PLD from Streptomyces septatus TH-2 (TH-2PLD) were identified as the key amino acid residues involved in the recognition of phospholipids. In the present study, we further investigated the relationship between a C-terminal loop of TH-2PLD and PLD activities to elucidate the reaction mechanism and the recognition of the substrate. By analyzing chimeras and mutants in terms of hydrolytic and transphosphatidylation activities, Ala426 and Lys438 of TH-2PLD were identified as the residues associated with the activities. We found that Gly188 and Asp191 recognized substrate forms, whereas residues Ala426 and Lys438 enhanced transphosphatidylation and hydrolysis activities regardless of the substrate form. By substituting Ala426 and Lys438 with Phe and His, respectively, the mutant showed not only higher activities but also higher thermostability and tolerance against organic solvents. Furthermore, the mutant also improved the selectivity of the transphosphatidylation activity. The residues Ala426 and Lys438 were located in the C-terminal flexible loop of Streptomyces PLD separate from the highly conserved catalytic HxKxxxxD motifs. We demonstrated that this C-terminal loop, which formed the entrance of the active well, has multiple functional roles in Streptomyces PLD.

Characterization, cloning, sequencing, and expression of an aminopeptidase N from Streptomyces sp. TH-4

The aminopeptidase N (TH-4AP) of Streptomyces sp. TH-4 was purified from a culture supernatant. The purified enzyme had a molecular mass of 95 kDa. The gene encoding TH-4AP was cloned and sequenced. The primary structure of the protein possessed the PepN-conserved motif GxMEN and the zinc-binding motif HExxHx18E, and showed 88% identity with that of PepN from Streptomyces lividans strain 66. We succeeded in overproducing a His-tagged recombinant enzyme using Escherichia coli. The enzyme had a 1.5-fold higher activity in the presence of cobalt ions than in their absence. To evaluate the possible application of TH-4AP to decrease the content of bitter peptides, we investigated the ability of Streptomyces aminopeptidases to hydrolyze synthetic peptides by a coupling method using L-amino acid oxidase and peroxidase. The substrate specificity of TH-4AP toward synthetic peptides was significantly different from that toward aminoacyl-p-nitroanilide derivatives.

Survey of the year 2005 commercial optical biosensor literature

We identified 1113 articles (103 reviews, 1010 primary research articles) published in 2005 that describe experiments performed using commercially available optical biosensors. While this number of publications is impressive, we find that the quality of the biosensor work in these articles is often pretty poor. It is a little disappointing that there appears to be only a small set of researchers who know how to properly perform, analyze, and present biosensor data. To help focus the field, we spotlight work published by 10 research groups that exemplify the quality of data one should expect to see from a biosensor experiment. Also, in an effort to raise awareness of the common problems in the biosensor field, we provide side-by-side examples of good and bad data sets from the 2005 literature.