The length of the A-M3 linker is a crucial determinant of the rate of the Ca2+ transport cycle of sarcoplasmic reticulum Ca2+-ATPase

The tilting motion of the central core reveals the transport mechanism of the sarco/endoplasmic reticulum Ca2+-ATPase

The sarco/endoplasmic reticulum Ca2+-ATPase (SERCA) transports two Ca2+ ions per ATP hydrolyzed from the cytoplasm to the lumen. However, how the ATP hydrolysis remotely drives the Ca2+ transport is unclear. In the SERCA1a crystal structures, the ATP hydrolysis is accompanied by the notably increasing tilting angle of the central core (CC) and the Ca2+ transport, and the CC tilting angle dramatically decreases in the E2 to E1 transition. We demonstrated that the significantly increasing tilting motion of the CC drove the Ca2+ release in the molecular dynamics simulation of the R836A variant, and the dramatic spontaneous decrease in the CC tilting angle of the E2 state triggers the restart of the SERCA1a's transport cycle. The repulsion between the phosphorylated D351 and the phosphate groups in ADP triggers the release of ADP from the SERCA1a headpiece. We proposed a novel SERCA transport mechanism in which ATP hydrolysis drives a significant tilting motion of the CC, which drives Ca2+ transport and the A domain rotational motion in the E1P-ADP-2Ca2+ to E2P transition. The dramatic spontaneous decrease in the CC tilting angle of the E2 state drives the restart of the transport cycle.

Multiple sub-state structures of SERCA2b reveal conformational overlap at transition steps during the catalytic cycle

Sarco/endoplasmic reticulum Ca²⁺ ATPase (SERCA) pumps Ca²⁺ into the endoplasmic reticulum (ER). Herein, we present cryo-electron microscopy (EM) structures of three intermediates of SERCA2b: Ca²⁺-bound phosphorylated (E1P·2Ca²⁺) and Ca²⁺-unbound dephosphorylated (E2·Pi) intermediates and another between the E2P and E2·Pi states. Our cryo-EM analysis demonstrates that the E1P·2Ca²⁺ state exists in low abundance and preferentially transitions to an E2P-like structure by releasing Ca²⁺ and that the Ca²⁺ release gate subsequently undergoes stepwise closure during the dephosphorylation processes. Importantly, each intermediate adopts multiple sub-state structures including those like the next one in the catalytic series, indicating conformational overlap at transition steps, as further substantiated by atomistic molecular dynamic simulations of SERCA2b in a lipid bilayer. The present findings provide insight into how enzymes accelerate catalytic cycles.

Structural basis of ion uptake in copper-transporting P1B-type ATPases

Copper is essential for living cells, yet toxic at elevated concentrations. Class 1B P-type (P1B-) ATPases are present in all kingdoms of life, facilitating cellular export of transition metals including copper. P-type ATPases follow an alternating access mechanism, with inward-facing E1 and outward-facing E2 conformations. Nevertheless, no structural information on E1 states is available for P1B-ATPases, hampering mechanistic understanding. Here, we present structures that reach 2.7 Å resolution of a copper-specific P1B-ATPase in an E1 conformation, with complementing data and analyses. Our efforts reveal a domain arrangement that generates space for interaction with ion donating chaperones, and suggest a direct Cu+ transfer to the transmembrane core. A methionine serves a key role by assisting the release of the chaperone-bound ion and forming a cargo entry site together with the cysteines of the CPC signature motif. Collectively, the findings provide insights into P1B-mediated transport, likely applicable also to human P1B-members.

Plasma Membrane Ca2+ Pump PMCA4z Is More Active Than Splicing Variant PMCA4x

The plasma membrane Ca²⁺ pumps (PMCA) are P-ATPases that control Ca²⁺ signaling and homeostasis by transporting Ca²⁺ out of the eukaryotic cell. Humans have four genes that code for PMCA isoforms (PMCA1-4). A large diversity of PMCA isoforms is generated by alternative mRNA splicing at sites A and C. The different PMCA isoforms are expressed in a cell-type and developmental-specific manner and exhibit differential sensitivity to a great number of regulatory mechanisms. PMCA4 has two A splice variants, the forms "x" and "z". While PMCA4x is ubiquitously expressed and relatively well-studied, PMCA4z is less characterized and its expression is restricted to some tissues such as the brain and heart muscle. PMCA4z lacks a stretch of 12 amino acids in the so-called A-M3 linker, a conformation-sensitive region of the molecule connecting the actuator domain (A) with the third transmembrane segment (M3). We expressed in yeast PMCA4 variants "x" and "z", maintaining constant the most frequent splice variant "b" at the C-terminal end, and obtained purified preparations of both proteins. In the basal autoinhibited state, PMCA4zb showed a higher ATPase activity and a higher apparent Ca²⁺ affinity than PMCA4xb. Both isoforms were stimulated by calmodulin but PMCA4zb was more strongly activated by acidic lipids than PMCA4xb. The results indicate that a PMCA4 intrinsically more active and more responsive to acidic lipids is produced by the variant "z" of the splicing site A.

Angle change of the A-domain in a single SERCA1a molecule detected by defocused orientation imaging

The sarcoendoplasmic reticulum Ca²⁺-ATPase (SERCA) transports Ca²⁺ ions across the membrane coupled with ATP hydrolysis. Crystal structures of ligand-stabilized molecules indicate that the movement of actuator (A) domain plays a crucial role in Ca²⁺ translocation. However, the actual structural movements during the transitions between intermediates remain uncertain, in particular, the structure of E2PCa₂ has not been solved. Here, the angle of the A-domain was measured by defocused orientation imaging using isotropic total internal reflection fluorescence microscopy. A single SERCA1a molecule, labeled with fluorophore ReAsH on the A-domain in fixed orientation, was embedded in a nanodisc, and stabilized on Ni–NTA glass. Activation with ATP and Ca²⁺ caused angle changes of the fluorophore and therefore the A-domain, motions lost by inhibitor, thapsigargin. Our high-speed set-up captured the motion during EP isomerization, and suggests that the A-domain rapidly rotates back and forth from an E1PCa₂ position to a position close to the E2P state. This is the first report of the detection in the movement of the A-domain as an angle change. Our method provides a powerful tool to investigate the conformational change of a membrane protein in real-time.

Structural Basis of Substrate-Independent Phosphorylation in a P4-ATPase Lipid Flippase

P4-ATPases define a eukaryotic subfamily of the P-type ATPases, and are responsible for the transverse flip of specific lipids from the extracellular or luminal leaflet to the cytosolic leaflet of cell membranes. The enzymatic cycle of P-type ATPases is divided into autophosphorylation and dephosphorylation half-reactions. Unlike most other P-type ATPases, P4-ATPases transport their substrate during dephosphorylation only, i.e. the phosphorylation half-reaction is not associated with transport. To study the structural basis of the distinct mechanisms of P4-ATPases, we have determined cryo-EM structures of Drs2p-Cdc50p from Saccharomyces cerevisiae covering multiple intermediates of the cycle. We identify several structural motifs specific to Drs2p and P4-ATPases in general that decrease movements and flexibility of domains as compared to other P-type ATPases such as Na⁺/K⁺-ATPase or Ca²⁺-ATPase. These motifs include the linkers that connect the transmembrane region to the actuator (A) domain, which is responsible for dephosphorylation. Additionally, mutation of Tyr380, which interacts with conserved Asp340 of the distinct DGET dephosphorylation loop of P4-ATPases, highlights a functional role of these P4-ATPase specific motifs in the A-domain. Finally, the transmembrane (TM) domain, responsible for transport, also undergoes less extensive conformational changes, which is ensured both by a longer segment connecting TM helix 4 with the phosphorylation site, and possible stabilization by the auxiliary subunit Cdc50p. Collectively these adaptions in P4-ATPases are responsible for phosphorylation becoming transport-independent.

Linking Biochemical and Structural States of SERCA: Achievements, Challenges, and New Opportunities

Sarcoendoplasmic reticulum calcium ATPase (SERCA), a member of the P-type ATPase family of ion and lipid pumps, is responsible for the active transport of Ca²⁺ from the cytoplasm into the sarcoplasmic reticulum lumen of muscle cells, into the endoplasmic reticulum (ER) of non-muscle cells. X-ray crystallography has proven to be an invaluable tool in understanding the structural changes of SERCA, and more than 70 SERCA crystal structures representing major biochemical states (defined by bound ligand) have been deposited in the Protein Data Bank. Consequently, SERCA is one of the best characterized components of the calcium transport machinery in the cell. Emerging approaches in the field, including spectroscopy and molecular simulation, now help integrate and interpret this rich structural information to understand the conformational transitions of SERCA that occur during activation, inhibition, and regulation. In this review, we provide an overview of the crystal structures of SERCA, focusing on identifying metrics that facilitate structure-based categorization of major steps along the catalytic cycle. We examine the integration of crystallographic data with different biophysical approaches and computational methods to link biochemical and structural states of SERCA that are populated in the cell. Finally, we discuss the challenges and new opportunities in the field, including structural elucidation of functionally important and novel regulatory complexes of SERCA, understanding the structural basis of functional divergence among homologous SERCA regulators, and bridging the gap between basic and translational research directed toward therapeutic modulation of SERCA.

Structural dynamics of P-type ATPase ion pumps

P-type ATPases transport ions across biological membranes against concentration gradients and are essential for all cells. They use the energy from ATP hydrolysis to propel large intramolecular movements, which drive vectorial transport of ions. Tight coordination of the motions of the pump is required to couple the two spatially distant processes of ion binding and ATP hydrolysis. Here, we review our current understanding of the structural dynamics of P-type ATPases, focusing primarily on Ca2+ pumps. We integrate different types of information that report on structural dynamics, primarily time-resolved fluorescence experiments including single-molecule Förster resonance energy transfer and molecular dynamics simulations, and interpret them in the framework provided by the numerous crystal structures of sarco/endoplasmic reticulum Ca2+-ATPase. We discuss the challenges in characterizing the dynamics of membrane pumps, and the likely impact of new technologies on the field.

Preexisting domain motions underlie protonation-dependent structural transitions of the P-type Ca2+-ATPase

We have performed microsecond molecular dynamics (MD) simulations to determine the mechanism for protonation-dependent structural transitions of the sarco/endoplasmic reticulum Ca2+-ATPase (SERCA), one of the most prominent members of the large P-type ATPase superfamily that transports ions across biological membranes. The release of two H+ from the transport sites activates SERCA by inducing a structural transition between low (E2) and high (E1) Ca2+-affinity states (E2-to-E1 transition), but the structural mechanism by which transport site deprotonation facilitates this transition is unknown. We performed microsecond all-atom MD simulations to determine the effects of transport site protonation on the structural dynamics of the E2 state in solution. We found that the protonated E2 state has structural characteristics that are similar to those observed in crystal structures of E2. Upon deprotonation, a single Na+ ion rapidly (<10 ns) binds to the transmembrane transport sites and induces a kink in M5, disrupts the M3-M5 interface, and increases the mobility of the M3/A-M3 linker. Principal component analysis showed that counter-rotation of the cytosolic N-A domains about the membrane normal axis, which is the primary motion driving the E2-to-E1 transition, is present in both protonated and deprotonated E2 states; however, protonation-dependent structural changes in the transmembrane domain control the hierarchical organization and amplitude of this motion. We propose that preexisting rigid-body domain motions underlie structural transitions of SERCA, where the functionally important directionality is preserved while transport site protonation controls the dominance and amplitude of motion to shift the equilibrium between the E1 and E2 states. We conclude that ligand-induced modulation of preexisting domain motions is likely a common theme in structural transitions of the P-type ATPase superfamily.

A structural mechanism for calcium transporter headpiece closure

To characterize the conformational dynamics of sarcoplasmic reticulum (SR) calcium pump (SERCA) we performed molecular dynamics simulations beginning with several different high-resolution structures. We quantified differences in structural disorder and dynamics for an open conformation of SERCA versus closed structures and observed that dynamic motions of SERCA cytoplasmic domains decreased with decreasing domain–domain separation distance. The results are useful for interpretation of recent intramolecular Förster resonance energy transfer (FRET) distance measurements obtained for SERCA fused to fluorescent protein tags. Those previous physical measurements revealed several discrete structural substates and suggested open conformations of SERCA are more dynamic than compact conformations. The present simulations support this hypothesis and provide additional details of SERCA molecular mechanisms. Specifically, all-atoms simulations revealed large-scale translational and rotational motions of the SERCA N-domain relative to the A- and P-domains during the transition from an open to a closed headpiece conformation over the course of a 400 ns trajectory. The open-to-closed structural transition was accompanied by a disorder-to-order transition mediated by an initial interaction of an N-domain loop (Nβ5-β6, residues 426–436) with residues 133–139 of the A-domain. Mutation of three negatively charged N-domain loop residues abolished the disorder-to-order transition and prevented the initial domain–domain interaction and subsequent closure of the cytoplasmic headpiece. Coarse-grained molecular dynamics simulations were in harmony with all-atoms simulations and physical measurements and revealed a close communication between fluorescent protein tags and the domain to which they were fused. The data indicate that previous intramolecular FRET distance measurements report SERCA structure changes with high fidelity and suggest a structural mechanism that facilitates the closure of the SERCA cytoplasmic headpiece.

The length of glycine-rich linker in DNA-binding domain is critical for optimal functioning of quorum-sensing master regulatory protein HapR

HapR is a quorum-sensing master regulatory protein in Vibrio cholerae. Though many facts are known regarding its structural and functional aspects, much still can be learnt from natural variants of this wild-type protein. While unraveling the underlying cause of functional inertness of a natural variant (HapRV2), the significance of a conserved glycine residue at position 39 in a glycine-rich linker in DNA-binding domain comes into light. This work aims at investigating how the length of glycine-rich linker (R(33)GIGRGG(39)) bridging helices α1 and α2 modulates the functionality of HapR. In pursuit of our interest, glycine residues were inserted after terminal glycine (G39) of the linker in a sequential manner. To evaluate functionality, all the glycine linker variants were subjected to a battery of performance tests under various conditions. Combined in vitro and in vivo results clearly demonstrated a gradual functional impairment of HapR linker variants coupled with increasing length of glycine-rich linker and finally, linker variant harboring four glycine residues resulted in a functionally compromised protein with significant loss of communication with cognate DNAs. Molecular dynamics studies of modeled HapR linker variants in complex with cognate promoter region show that residues namely Ser50, Thr53 and Asn56 are involved in varying degree of interactions with different nucleotides of HapR-DNA complex. The diminished functionality between variants and DNA appears to result from reduced or no interactions between Phe55 and nucleotides of cognate DNA as observed during simulations.

Coarse-grained simulations of transitions in the E2-to-E1 conformations for Ca ATPase (SERCA) show entropy-enthalpy compensation

SERCA is a membrane transport protein that has been extensively studied. There are a large number of highly resolved X-ray structures and several hundred mutations that have been characterized functionally. Despite this, the molecular details of the catalytic cycle, a cycle that includes large conformational changes, is not fully understood. In this computational study, we provide molecular dynamics descriptions of conformational changes during the E2→E1 transitions. The motivating point for these calculations was a series of insertion mutants in the A-M3 linker region that led to significant shifts in measured rates between the E2 and E1 states, as shown by experimental characterization. Using coarse-grained dynamic importance sampling within the context of a population shift framework, we sample on the intermediates along the transition pathway to address the mechanism for the conformational changes and the effects of the insertion mutations on the kinetics of the transition. The calculations define an approximation for the relative changes in entropy and enthalpy along the transition. These are found to be important for understanding the experimentally observed differences in rates. In particular, the interactions between cytoplasmic domains, water interactions, and the shifts in protein degrees of freedom with the insertion mutations show mutual compensation for the E2→E1 transitions in wild-type and mutant systems.

The role of domain: domain interactions versus domain: water interactions in the coarse-grained simulations of the E1P to E2P transitions in Ca-ATPase (SERCA)

SERCA is an important model system for understanding the molecular details of conformational change in membrane transport systems. This reflects the large number of solved X-ray structures and the equally large database of mutations that have been assayed. In this computational study, we provide a molecular dynamics description of the conformational changes during the E1P → E2P transitions. This set of states further changes with insertion mutants in the A-M3 linker region. These mutants were experimentally shown to lead to significant shifts in rates between the E1P → E2P states. Using the population shift framework and dynamic importance sampling method along with coarse-grained representations of the protein, lipid, and water, we suggest why these changes are found. The calculations sample on intermediates and suggest that changes in interactions, individual helix interactions, and water behavior are key elements in the molecular compositions that underlie shifts in kinetics. In particular, as the insertion length grows, it attracts more water and disrupts domain interactions, creating changes as well at the sites of key helix interactions between the A-Domain and the P-Domain. This provides a conceptual picture that aids understanding of the experimental results.

The sarcoplasmic Ca2+-ATPase: design of a perfect chemi-osmotic pump

The sarcoplasmic (SERCA 1a) Ca2+-ATPase is a membrane protein abundantly present in skeletal muscles where it functions as an indispensable component of the excitation-contraction coupling, being at the expense of ATP hydrolysis involved in Ca2+/H+ exchange with a high thermodynamic efficiency across the sarcoplasmic reticulum membrane. The transporter serves as a prototype of a whole family of cation transporters, the P-type ATPases, which in addition to Ca2+ transporting proteins count Na+, K+-ATPase and H+, K+-, proton- and heavy metal transporting ATPases as prominent members. The ability in recent years to produce and analyze at atomic (2·3-3 Å) resolution 3D-crystals of Ca2+-transport intermediates of SERCA 1a has meant a breakthrough in our understanding of the structural aspects of the transport mechanism. We describe here the detailed construction of the ATPase in terms of one membraneous and three cytosolic domains held together by a central core that mediates coupling between Ca2+-transport and ATP hydrolysis. During turnover, the pump is present in two different conformational states, E1 and E2, with a preference for the binding of Ca2+ and H+, respectively. We discuss how phosphorylated and non-phosphorylated forms of these conformational states with cytosolic, occluded or luminally exposed cation-binding sites are able to convert the chemical energy derived from ATP hydrolysis into an electrochemical gradient of Ca2+ across the sarcoplasmic reticulum membrane. In conjunction with these basic reactions which serve as a structural framework for the transport function of other P-type ATPases as well, we also review the role of the lipid phase and the regulatory and thermodynamic aspects of the transport mechanism.

In and out of the cation pumps: P-type ATPase structure revisited

Active transport across membranes is a crucial requirement for life. P-type ATPases build up electrochemical gradients at the expense of ATP by forming and splitting a covalent phosphoenzyme intermediate, coupled to conformational changes in the transmembrane section where the ions are translocated. The marked increment during the last three years in the number of crystal structures of P-type ATPases has greatly improved our understanding of the similarities and differences of pumps with different ion specificities, since the structures of the Ca2+-ATPase, the Na+,K+-ATPase and the H+-ATPase can now be compared directly. Mechanisms for ion gating, charge neutralization and backflow prevention are starting to emerge from comparative structural analysis; and in combination with functional studies of mutated pumps this provides a framework for speculating on how the ions are bound and released as well as on how specificity is achieved.

Stable structural analog of Ca2+-ATPase ADP-insensitive phosphoenzyme with occluded Ca2+ formed by elongation of A-domain/M1'-linker and beryllium fluoride binding

We have developed a stable analog for the ADP-insensitive phosphoenzyme intermediate with two occluded Ca(2+) at the transport sites (E2PCa(2)) of sarcoplasmic reticulum Ca(2+)-ATPase. This is normally a transient intermediate state during phosphoenzyme isomerization from the ADP-sensitive to ADP-insensitive form and Ca(2+) deocclusion/release to the lumen; E1PCa(2) --> E2PCa(2) --> E2P + 2Ca(2+). Stabilization was achieved by elongation of the Glu(40)-Ser(48) loop linking the Actuator domain and M1 (1st transmembrane helix) with four glycine insertions at Gly(46)/Lys(47) and by binding of beryllium fluoride (BeF(x)) to the phosphorylation site of the Ca(2+)-bound ATPase (E1Ca(2)). The complex E2Ca(2)xBeF(3)(-) was also produced by lumenal Ca(2+) binding to E2xBeF(3)(-) (E2P ground state analog) of the elongated linker mutant. The complex was stable for at least 1 week at 25 degrees C. Only BeF(x), but not AlF(x) or MgF(x), produced the E2PCa(2) structural analog. Complex formation required binding of Mg(2+), Mn(2+), or Ca(2+) at the catalytic Mg(2+) site. Results reveal that the phosphorylation product E1PCa(2) and the E2P ground state (but not the transition states) become competent to produce the E2PCa(2) transient state during forward and reverse phosphoenzyme isomerization. Thus, isomerization and lumenal Ca(2+) release processes are strictly coupled with the formation of the acylphosphate covalent bond at the catalytic site. Results also demonstrate the critical structural roles of the Glu(40)-Ser(48) linker and of Mg(2+) at the catalytic site in these processes.

[Novel ratchet mechanism of gastric H(+), K(+)-ATPase revealed by electron crystallography of two-dimensional crystals]

Acid secretion by the stomach results in a pH of about 1. This highly acidic environment is essential for digestion and also acts as a first barrier against bacterial and viral infections. Conversely, too much acid secretion causes gastric ulcer. The mechanism by which this massive proton gradient is generated is of considerable biomedical interest. In this review, we introduce the first molecular model for this remarkable biological phenomenon. The structure of H(+),K(+)-ATPase at 6.5 A resolution was determined by electron crystallography of two-dimensional crystals. The structure shows the catalytic alpha-subunit and the non-catalytic beta-subunit in a pseudo-E(2)P conformation. Different from Na(+),K(+)-ATPase, the N-terminal tail of the beta-subunit is in direct contact with the phosphorylation domain of the alpha-subunit. This interaction may hold the phosphorylation domain in place, thus stabilizing the enzyme conformation and preventing the reverse reaction of the transport cycle. Indeed, truncation of the beta-subunit N-terminus allowed the reverse reaction to occur. These results suggest that the N-terminal tail of the beta-subunit functions as a "ratchet", preventing inefficient transport and reverse-flow of protons. We can thus provide a mechanistic explanation for how the H(+),K(+)-ATPase can generate a million-fold proton gradient across the gastric parietal cell membrane, the highest cation gradient known in any mammalian tissue.

Formation of the stable structural analog of ADP-sensitive phosphoenzyme of Ca2+-ATPase with occluded Ca2+ by beryllium fluoride: structural changes during phosphorylation and isomerization

As a stable analog for ADP-sensitive phosphorylated intermediate of sarcoplasmic reticulum Ca(2+)-ATPase E1PCa(2).Mg, a complex of E1Ca(2).BeF(x), was successfully developed by addition of beryllium fluoride and Mg(2+) to the Ca(2+)-bound state, E1Ca(2). In E1Ca(2).BeF(x), most probably E1Ca(2).BeF(3)(-), two Ca(2+) are occluded at high affinity transport sites, its formation required Mg(2+) binding at the catalytic site, and ADP decomposed it to E1Ca(2), as in E1PCa(2).Mg. Organization of cytoplasmic domains in E1Ca(2).BeF(x) was revealed to be intermediate between those in E1Ca(2).AlF(4)(-) ADP (transition state of E1PCa(2) formation) and E2.BeF(3)(-).(ADP-insensitive phosphorylated intermediate E2P.Mg). Trinitrophenyl-AMP (TNP-AMP) formed a very fluorescent (superfluorescent) complex with E1Ca(2).BeF(x) in contrast to no superfluorescence of TNP-AMP bound to E1Ca(2).AlF(x). E1Ca(2).BeF(x) with bound TNP-AMP slowly decayed to E1Ca(2), being distinct from the superfluorescent complex of TNP-AMP with E2.BeF(3)(-), which was stable. Tryptophan fluorescence revealed that the transmembrane structure of E1Ca(2).BeF(x) mimics E1PCa(2).Mg, and between those of E1Ca(2).AlF(4)(-).ADP and E2.BeF(3)(-). E1Ca(2).BeF(x) at low 50-100 microm Ca(2+) was converted slowly to E2.BeF(3)(-) releasing Ca(2+), mimicking E1PCa(2).Mg --> E2P.Mg + 2Ca(2+). Ca(2+) replacement of Mg(2+) at the catalytic site at approximately millimolar high Ca(2+) decomposed E1Ca(2).BeF(x) to E1Ca(2). Notably, E1Ca(2).BeF(x) was perfectly stabilized for at least 12 days by 0.7 mm lumenal Ca(2+) with 15 mm Mg(2+). Also, stable E1Ca(2).BeF(x) was produced from E2.BeF(3)(-) at 0.7 mm lumenal Ca(2+) by binding two Ca(2+) to lumenally oriented low affinity transport sites, as mimicking the reverse conversion E2P. Mg + 2Ca(2+) --> E1PCa(2).Mg.