Thermal Properties of Electrospun Poly(Lactic Acid) Membranes

Antibacterial and Antifungal Activity of Poly(Lactic Acid)-Bovine Lactoferrin Nanofiber Membranes

Antimicrobial materials have become relevant for local therapies preventing microbial resistance induced by systemic antibiotic treatments. This work reports the development of electrospun poly(lactic acid) (PLLA) nanofiber membranes loaded with bovine lactoferrin (bLF) up to 20 wt%. The membranes present smooth and nondefective fibers with mean diameters between 717 ± 197 and 495 ± 127 nm, and an overall porosity of ≈80%. The hydrophobicity of the PLLA membranes is reduced by the presence of bLF. The release profile of bLF correlates with an anomalous transport model, with 17.7 ± 3.6% being released over 7 weeks. The nanofiber mats show no cytotoxicity on human skin fibroblasts and even promote cell proliferation after short exposure periods. Furthermore, the developed membranes display antifungal activity against Aspergillus nidulans by inhibiting spore germination and mycelial growth. These results evidence the strong potential of bLF-PLLA nanofiber membranes to be used as antifungal dressings.

Effect of Sterilization Methods on Electrospun Poly(lactic acid) (PLA) Fiber Alignment for Biomedical Applications

Medically approved sterility methods should be a major concern when developing a polymeric scaffold, mainly when commercialization is envisaged. In the present work, poly(lactic acid) (PLA) fiber membranes were processed by electrospinning with random and aligned fiber alignment and sterilized under UV, ethylene oxide (EO), and γ-radiation, the most common ones for clinical applications. It was observed that UV light and γ-radiation do not influence fiber morphology or alignment, while electrospun samples treated with EO lead to fiber orientation loss and morphology changing from cylindrical fibers to ribbon-like structures, accompanied to an increase of polymer crystallinity up to 28%. UV light and γ-radiation sterilization methods showed to be less harmful to polymer morphology, without significant changes in polymer thermal and mechanical properties, but a slight increase of polymer wettability was detected, especially for the samples treated with UV radiation. In vitro results indicate that both UV and γ-radiation treatments of PLA membranes allow the adhesion and proliferation of MG 63 osteoblastic cells in a close interaction with the fiber meshes and with a growth pattern highly sensitive to the underlying random or aligned fiber orientation. These results are suggestive of the potential of both γ-radiation sterilized PLA membranes for clinical applications in regenerative medicine, especially those where customized membrane morphology and fiber alignment is an important issue.

Highly Compliant Vascular Grafts with Gelatin-Sheathed Coaxially Structured Nanofibers

We have developed three types of materials composed of polyurethane-gelatin, polycaprolactone-gelatin, or polylactic acid-gelatin nanofibers by coaxially electrospinning the hydrophobic core and gelatin sheath with a ratio of 1:5 at fixed concentrations. Results from attenuated total reflection-Fourier transformed infrared spectroscopy demonstrated the gelatin coating around nanofibers in all of the materials. Transmission electron microscopy images further displayed the core-sheath structures showing the core-to-sheath thickness ratio varied greatly with the highest ratio found in polyurethane-gelatin nanofibers. Scanning electron microscopy images revealed similar, uniform fibrous structures in all of the materials, which changed with genipin cross-linking due to interfiber interactions. Thermal analyses revealed varied interactions between the hydrophilic sheath and hydrophobic core among the three materials, which likely caused different core-sheath structures, and thus physicomechanical properties. The addition of gelatin around the hydrophobic polymer and their interactions led to the formation of graft scaffolds with tissue-like viscoelasticity, high compliance, excellent swelling capability, and absence of water permeability while maintaining competent tensile modulus, burst pressure, and suture retention. The hydrogel-like characteristics are advantageous for vascular grafting use, because of the capability of bypassing preclotting prior to implantation, retaining vascular fluid volume, and facilitating molecular transport across the graft wall, as shown by coculturing vascular cells sandwiched over a thick-wall scaffold. Varied core-sheath interactions within scaffolding nanofibers led to differences in graft functional properties such as water swelling ratio, compliance, and supporting growth of cocultured vascular cells. The PCL-gelatin scaffold with thick gelatin-sheathed nanofibers demonstrated a more compliant structure, elastic mechanics, and high water swelling property. Our results demonstrate a feasible approach to produce new hybrid, biodegradable nanofibrous scaffold biomaterials with interactive core-sheath structure, good biocompatibility, and tissue-like viscoelasticity, which may reduce potential problems with the use of individual polymers for vascular grafts.

Surface roughness dependent osteoblast and fibroblast response on poly(L-lactide) films and electrospun membranes

Poly(l-lactide) electrospun mats with random and aligned fiber orientation and films have been produced with degrees of crystallinity ranging from 0 up to nearly 50%. The overall surface roughness is practically constant irrespective of the sampling areas (1 × 1 µm to 20 × 20 µm) for degrees of crystallinity below 30%, increasing for higher degrees of crystallinity for the larger sampling areas. Further, due to fiber confinement, surface roughness variations are smaller in electrospun mats. Samples with 50% of crystallinity show the lowest osteoblast and the highest fibroblast proliferation. Therefore, it is verified that higher roughness promotes lower osteoblast but higher fibroblast proliferation. The overall results indicate the relevant role of the sub-microenvironment variations associated to the microscale roughness in determining the different cell responses.