A Rheological Study of Xanthan Polymer for Enhanced Oil Recovery

Silica Nanoparticles in Xanthan Gum Solutions: Oil Recovery Efficiency in Core Flooding Tests

Polymer flooding is one of the enhanced oil recovery (EOR) methods that increase the macroscopic efficiency of the flooding process and enhanced crude oil recovery. In this study, the effect of silica nanoparticles (NP-SiO₂) in xanthan gum (XG) solutions was investigated through the analysis of efficiency in core flooding tests. First, the viscosity profiles of two polymer solutions, XG biopolymer and synthetic hydrolyzed polyacrylamide (HPAM) polymer, were characterized individually through rheological measurements, with and without salt (NaCl). Both polymer solutions were found suitable for oil recovery at limited temperatures and salinities. Then, nanofluids composed of XG and dispersed NP-SiO₂ were studied through rheological tests. The addition of nanoparticles was shown to produce a slight effect on the viscosity of the fluids, which was more remarkable over time. Interfacial tension tests were measured in water-mineral oil systems, without finding an effect on the interfacial properties with the addition of polymer or nanoparticles in the aqueous phase. Finally, three core flooding experiments were conducted using sandstone core plugs and mineral oil. The polymers solutions (XG and HPAM) with 3% NaCl recovered 6.6% and 7.5% of the residual oil from the core, respectively. In contrast, the nanofluid formulation recovered about 13% of the residual oil, which was almost double that of the original XG solution. The nanofluid was therefore more effective at boosting oil recovery in the sandstone core.

Effect of Silica Nanoparticles in Xanthan Gum Solutions: Evolution of Viscosity over Time

The effect of silica nanoparticles (NP-SiO₂) in xanthan gum (XG) solutions was investigated through the analysis of viscosity profiles. First, hydrocolloid XG solutions and hydrophilic NP-SiO₂ suspensions were characterized individually through rheological measurements, with and without salt (NaCl). Then, nanofluids composed of XG and NP-SiO₂ dispersed in water and brine were studied through two different aging tests. The addition of nanoparticles was shown to produce a slight effect on the viscosity of the fresh fluids (initial time), while a more remarkable effect was observed over time. In particular, it appears that the presence of NP-SiO₂ stabilizes the polymer solution by maintaining its viscosity level in time, due to a delay in the movement of the molecule. Finally, characterization techniques such as confocal microscopy, capillary rheometry, and Zeta potential were implemented to analyze the XG/NP-SiO₂ interaction. Intrinsic viscosity and relative viscosity were calculated to understand the molecular interactions. The presence of NP-SiO₂ increases the hydrodynamic radius of the polymer, indicating attractive forces between these two components. Furthermore, dispersion of the nanoparticles in the polymeric solutions leads to aggregates of an average size smaller than 300 nm with a good colloidal stability due to the electrostatic attraction between XG and NP-SIO₂. This study proves the existence of interactions between XG and NP-SiO₂ in solution.

Application of Polymers for Chemical Enhanced Oil Recovery: A Review

Polymers play a significant role in enhanced oil recovery (EOR) due to their viscoelastic properties and macromolecular structure. Herein, the mechanisms of the application of polymeric materials for enhanced oil recovery are elucidated. Subsequently, the polymer types used for EOR, namely synthetic polymers and natural polymers (biopolymers), and their properties are discussed. Moreover, the numerous applications for EOR such as polymer flooding, polymer foam flooding, alkali–polymer flooding, surfactant–polymer flooding, alkali–surfactant–polymer flooding, and polymeric nanofluid flooding are appraised and evaluated. Most of the polymers exhibit pseudoplastic behavior in the presence of shear forces. The biopolymers exhibit better salt tolerance and thermal stability but are susceptible to plugging and biodegradation. As for associative synthetic polyacrylamide, several complexities are involved in unlocking its full potential. Hence, hydrolyzed polyacrylamide remains the most coveted polymer for field application of polymer floods. Finally, alkali–surfactant–polymer flooding shows good efficiency at pilot and field scales, while a recently devised polymeric nanofluid shows good potential for field application of polymer flooding for EOR.

Thermostable and rheological properties of natural and genetically engineered xanthan gums in different solutions at high temperature

Thermostability is an important indicator to evaluate xanthan applied in the oilfield industry. Besides reductive agents, salts, and pH, the inherent primary structure is also an important determinant of thermostability. In this work, the thermal conformational transition and degradation of natural xanthan XG and variants XG-A0, XG-AA, and XG-0P dissolved in different solvents were compared. Acetylated XG-A0 and XG-AA both showed the highest initial conformational transition temperature (Tm₀) in distilled water, NaCl, and CaCl₂ brines. Additionally, the variant XG-A0 dissolved in water was more thermostable although its acetyl group was hydrolyzed easily after a hot-rolling test at 110 °C. Thermostability could be reinforced by adding antioxidant Na₂SO₃ and saturated NaCl through improving Tm₀ value or inhibiting degradation of the molecular chain and acyl groups. Furthermore, pyruvyl-rich XG-0P dissolved in saturated NaCl showing multi-stranded helix structure was also stable after a hot-rolling process. Therefore, xanthan variants, as biological products, will have broader application potential in the oilfield industry.

Polyacrylamide Grafted Xanthan: Microwave-Assisted Synthesis and Rheological Behavior for Polymer Flooding

Application of polymer-flooding systems in secondary and tertiary oil recovery represents a real challenge for oil industry. In this work, our main objective is to explore possibilities of making use of xanthan-g-polyacrylamide for polymer flooding in a particular Devonian oilfield of medium salinity. The graft polymer was synthesized by using microwave-assisted graft copolymerization reaction of acrylamide on xanthan. The synthesized copolymer with optimized grafting parameters has been characterized by Infrared Spectroscopy and Thermal Analysis (DSC). Rheological analysis by steady shear and oscillatory flow experiments have been subsequently performed for xanthan and grafted xanthan under reservoir conditions. In steady shear, as expected the grafted polymer solutions flow as shear-thinning materials and apparent viscosity showed good fits with Cross's model. The viscosity losses due to salinity or temperature are more controlled for the grafted xanthan compared to pristine xanthan. When the grafted polymer concentration is increased to 2000 ppm the losses were halved. In oscillatory shear, the copolymer solutions followed a global behavior of semi-dilute entangled systems; furthermore, all dynamic properties were influenced by the brine salinity. Compared to xanthan, the elastic properties of xanthan-g-polyacrylamide solutions have been significantly improved in saline media and the losses in elasticity of grafted polymer solutions are lower.

Comparative Study of Green and Synthetic Polymers for Enhanced Oil Recovery

Several publications by authors in the field of petrochemical engineering have examined the use of chemically enhanced oil recovery (CEOR) technology, with a specific interest in polymer flooding. Most observations thus far in this field have been based on the application of certain chemicals and/or physical properties within this technique regarding the production of 50-60% trapped (residual) oil in a reservoir. However, there is limited information within the literature about the combined effects of this process on whole properties (physical and chemical). Accordingly, in this work, we present a clear distinction between the use of xanthan gum (XG) and hydrolyzed polyacrylamide (HPAM) as a polymer flood, serving as a background for future studies. XG and HPAM have been chosen for this study because of their wide acceptance in relation to EOR processes. To this degree, the combined effect of a polymer's rheological properties, retention, inaccessible pore volume (PV), permeability reduction, polymer mobility, the effects of salinity and temperature, and costs are all investigated in this study. Further, the generic screening and design criteria for a polymer flood with emphasis on XG and HPAM are explained. Finally, a comparative study on the conditions for laboratory (experimental), pilot-scale, and field-scale application is presented.

A review of polymer nanohybrids for oil recovery

As oil fields go into their final stage of production, new technologies are necessary to sustain production and increase the recovery of the hydrocarbon. Chemical injection is an enhanced recovery technique, which focuses on increasing the effectiveness of waterfloods. However, the use of chemical flooding has been hampered by its relatively high cost and the adsorption of the injected chemicals onto the reservoir rocks. In recent years, nanofluids have been launched as an overall less expensive and more efficient alternative to other chemical agents. Nanoparticle inclusion is also proposed to mitigate polymer flooding performance limitations under harsh reservoir conditions. This review presents a comprehensive discussion of the most recent developments of polymer nanohybrids for oil recovery. First, the preparation methods of polymer nanohybrids are summarized and explained. Then, an explanation of the different mechanisms leading to improved oil recovery are highlighted. Finally, the current challenges and opportunities for future development and application of polymer nanohybrids for chemical flooding are identified.

Effect of Hydrophobic and Hydrophilic Metal Oxide Nanoparticles on the Performance of Xanthan Gum Solutions for Heavy Oil Recovery

Recent studies revealed higher polymer flooding performance upon adding metal oxide nanoparticles (NPs) to acrylamide-based polymers during heavy oil recovery. The current study considers the effect of TiO₂, Al₂O₃, in-situ prepared Fe(OH)₃ and surface-modified SiO₂ NPs on the performance of xanthan gum (XG) solutions to enhance heavy oil recovery. Surface modification of the SiO₂ NPs was achieved by chemical grafting with 3-(methacryloyloxy)propyl]trimethoxysilane (MPS) and octyltriethoxysilane (OTES). The nanopolymer sols were characterized by their rheological properties and ζ-potential measurements. The efficiency of the nanopolymer sols in displacing oil was assessed using a linear sand-pack at 25 °C and two salinities (0.3 wt % and 1.0 wt % NaCl). The ζ-potential measurements showed that the NP dispersions in deionized (DI) water are unstable, but their colloidal stability improved in presence of XG. The addition of unmodified and modified SiO₂ NPs increased the viscosity of the XG solution at all salinities. However, the high XG adsorption onto the surface of Fe(OH)₃, Al₂O₃, and TiO₂ NPs reduced the viscosity of the XG solution. Also, the NPs increased the cumulative oil recovery between 3% and 9%, and between 1% and 5% at 0 wt % and 0.3 wt % NaCl, respectively. At 1.0 wt % NaCl, the NPs reduced oil recovery by XG solution between 5% and 12%, except for Fe(OH)₃ and TiO₂ NPs. These NPs increased the oil recovery between 2% and 3% by virtue of reduced polymer adsorption caused by the alkalinity of the Fe(OH)₃ and TiO₂ nanopolymer sols.

Biopolymer from marine Athelia and its application on heavy oil recovery in heterogeneous reservoir

Biopolymer produced from marine Athelia strain presented unique Pseudoplastic behaviors under extremely-high temperature and salinity conditions. Characteristic analysis with FT-IR spectroscopy, high performance liquid chromatography, 1H and 13C NMR and two-dimensional COSY and HMQC spectra showed the structure of β-(1-6) glucans. Single-factor and orthogonal experiment design were used to optimize the yield, the maximum yield of the biopolymer was 28.32 g/L with 56.64% carbon conversion rate under optimized conditions. Economic investigation demonstrated that this novel biopolymer has great potential of commercialization with the competitive cost of $2896.04-5228.94 per ton for powder. Resistance factor and residual resistance factor were evaluated with core flooding experiments showed that this biopolymer had excellent performance of plugging capacity and profile modification, and indicating the great potential of application on heavy oil recovery.