Gold catalysis in organic transformations: A review

Gold-Catalyzed Lactone Synthesis: Advancements and Insights

Lactones represent a class of fundamental structural motifs ubiquitous in nature, holding significance across diverse scientific domains such as pharmaceuticals, natural products, drug discovery, and industry. Despite their simplicity, the synthesis of lactones has garnered considerable interest due to their pivotal roles. Gold, traditionally regarded as a noble metal, has emerged as an efficient catalyst, challenging conventional perceptions. The utilization of gold in lactone synthesis has captivated researchers, leading to the development of numerous effective methodologies. Motivated by this, we present a comprehensive compilation of reports on the gold-catalyzed synthesis of lactones, encompassing literature till date.

[Ag(IPr)(bpy)][PF6]: brightness and darkness playing with aggregation induced phosphorescence for light-emitting electrochemical cells

Heteroleptic silver(I) complexes have recently started to attract attention in thin-film lighting technologies as an alternative to copper(I) analogues due to the lack of flattening distortion upon excitation. However, the interpretation of their photophysical behavior is challenging going from traditional fluorescence/phosphorescence to a temperature-dependent dual emission mechanism and ligand-lock assisted thermally activated delayed fluorescence. Herein, we unveil the photoluminescence behavior of a three-coordinated Ag(I) complex with the N-heterocyclic carbene (NHC) ligand and 2,2'-bipyridine (bpy) as the N^N ligand. In contrast to its low-emissive Cu(I) complex structural analogues, a strong greenish emission was attributed to the presence of aggregates formed by π-π intermolecular interactions as revealed by the X-ray structure and aggregation induced emission (AIE) studies in solution. In addition, the temperature-dependent time-resolved spectroscopic and computational studies demonstrated that the emission mechanism is related to a phosphorescence emission mechanism of two very close lying (ΔE = 0.08 eV) excited triplet states, exhibiting a similar delocalized nature over the bipyridine ligands. Unfortunately, this favourable AIE is lost upon forming homogeneous thin films suitable for lighting devices. Though the films showed very poor emission, the electrochemical stability under device operation conditions is remarkable compared to the prior-art, highlighting the potential of [Ag(NHC)(N^N)][X] complexes in thin-film lighting.

Advances in gold catalyzed synthesis of quinoid heteroaryls

This review explores recent advancements in synthesizing quinoid heteroaryls, namely quinazoline and quinoline, vital in chemistry due to their prevalence in natural products and pharmaceuticals. It emphasizes the rapid, highly efficient, and economically viable synthesis achieved through gold-catalyzed cascade protocols. By investigating methodologies and reaction pathways, the review underscores exceptional yields attainable in the synthesis of quinoid heteroaryls. It offers valuable insights into accessing these complex structures through efficient synthetic routes. Various strategies, including cyclization, heteroarylation, cycloisomerization, cyclo-condensation, intermolecular and intramolecular cascade reactions, are covered, highlighting the versatility of gold-catalyzed approaches. The comprehensive compilation of different synthetic approaches and elucidation of reaction mechanisms contribute to a deeper understanding of the field. This review paves the way for future advancements in synthesizing quinoid heteroaryls and their applications in drug discovery and materials science.

[Au]-Catalyzed Cyclization of Propargyl-Tethered Ene-Amides: Substrate-Dependent Access to Tetrasubstituted Pyrroles, Aminophenols, and Dihydropyridines

[Au]-catalyzed and substrate-dependent intramolecular cyclization of sulfonyl ene-amides with a pendant propargyl group afford tetrasubstituted pyrroles, o-aminophenols, or 1,6-dihydropyridine carbaldehydes. While the pyrroles and aminophenols are formed when the propargylic alkyne is terminal, dihydropyridines are formed when internal alkyne is present. Internal alkyne substrates with 2-thienyl and 3-thienyl groups give different types of dihydropyridines. The dihydropyridines so obtained can be readily converted to nicotinaldehydes with concomitant sulfonyl migration upon heating in xylene.

Computational Research on Ag(I)-Catalyzed Cubane Rearrangement: Mechanism, Metal and Counteranion Effect, Ligand Engineering, and Post-Transition-State Desymmetrization

Ag(I) salts have demonstrated superior catalytic activity in the cubane-cuneane rearrangement. This research presents a comprehensive mechanistic investigation using high-level computations. The reaction proceeds via oxidative addition (OA) of Ag(I) to the C-C bond, followed by C-Ag bond cleavage and subsequent dynamically concerted carbocation rearrangement. The OA of Ag(I) exhibits significant more electrophilic nature than classical transition metal-induced OA, and the superior catalytic activity of Ag(I) is attributed to the accessibility of a highly electrophilic "bare" Ag+ center and a relatively weak Ag-C bond. However, the highly Lewis acidic nature of the Ag(I) center limits the substrate scope. To address this problem, ligand and counteranion screening was conducted, revealing that chiral biarylether ligands in combination with BF4- as the counteranion offer both enhanced reactivity and improved chemoselectivity while suppressing the Lewis acidity. Additionally, quasi-classical molecular dynamics simulations indicate the possibility of a novel desymmetrization pathway through post-transition-state dynamics in the biarylether-Ag(I)-BF4- system, thereby providing a potential avenue for enantioselective cuneane synthesis.

Online coupling of a catalytic continuous microflow reactor to mass spectrometry

Flow cell reactors used for catalyst development and applications are upcoming due to their small environmental and economic footprint. Online microflow reactor coupling with mass spectrometry (MS) opens new possibilities for monitoring catalyst performance and identifying reaction products in real time. This is demonstrated for the metabolic relevant dealkylation of lidocaine on catalytic gold micro-particles using regular liquid chromatography modules. Yields of up to 90% norlidocaine were realized under mild continuous flow conditions for up to 10 h (pH 7, 30 °C and 20 μL/min). Dissolved oxygen was shown to be a rate-limiting factor, since an inline oxygen generator allowed to increase the reactor capacity by one order of magnitude. Monitoring product time-response curve slopes after starting and ending a substrate feed, provided insights into the adsorption/desorption and conversion kinetics at the catalyst surface indicating the presence of strong adsorption sites that do not contribute substantially to substrate conversion.

Gold(I)-Mediated Isomerization of Spring-loaded 1,7-Enynes seen through the Lens of Density Functional Theory

We propose a mechanism for the previously reported formation of benzobicyclo[3.2.0]heptane derivatives from 1,7-enyne derivatives bearing a terminal cyclopropane. -> A mechanism for the previously reported formation of benzobicyclo[3.2.0]heptane derivatives from 1,7-enyne derivatives bearing a terminal cyclopropane is proposed.

Deciphering the Primary Role of Au⋅⋅⋅H-X Hydrogen Bonding in Gold Catalysis

Au⋅⋅⋅H-X (X=N or C) hydrogen bonding is gaining increasing interest, both in the study of its intrinsic nature and in their operability in different fields. While the role of these interactions has been studied in the stabilization of gold(I) complexes, their role during the minimum free energy reaction pathway of a given catalytic process remains unexplored. We report herein that complex [Au(C≡CPh)(pip)] (pip=piperidine) catalyses the A3 -coupling reaction for the synthesis of propargylamines, thanks to the ability of Au(I) to promote weak hydrogen bonding interactions with the reactants along the free energy profile. Density Functional Theory (DFT) calculations show that these Au⋅⋅⋅H-X interactions play a directing role in the catalysed A3 -coupling. Topological non-covalent interactions (NCI), interaction region indicator (IRI) and quantum theory of atoms in molecules (QTAIM) analysis in real space of the electron density provide a description of these interactions accurately.

Synthesis of an Indazole/Indazolium Phosphine Ligand Scaffold and Its Application in Gold(I) Catalysis

Advances in ligand development have allowed for the fine-tuning of gold catalysis. To contribute to this field, we designed an indazole phosphine ligand scaffold that allows facile introduction of cationic charge through methylation. With minimal changes to the structure upon methylation, we could assess the importance of the electronic effects of the insertion of a positive charge on the catalytic activity of the resulting gold(I) complex. Using the benchmark reactions of propargyl amide cyclization and enyne cyclization with and without hexafluoroisopropanol (HFIP), we observed marked differences in the catalytic activities of the neutral and cationic gold species.

Asymmetric Hydroarylation Reactions Catalyzed by Transition Metals: Last 10 Years in a Mini Review

Hydroarylation reactions play a pivotal role in organic chemistry due to their versatility and efficiency. In the last 10 years, the scientific production around this reaction has been very high, but in its asymmetric version, the results are less. In this mini review, selected literature examples are considered to draw attention to directions of the asymmetric hydroarylation reaction mediated by transition metal catalysts. The selected works were grouped in two main sections. In the first, we reported examples relating the narrower definition of hydroarylation, namely the metal-catalyzed processes where inactivated aryl moiety undergoes a direct functionalization via insertion of an unsaturated compound. In the second part, hydroarylation reactions take place with the use of pre-activated aryl substrates, usually aryl-iodides or aryl-boronated.

Facile synthesis of the spiro-pyridoindolone scaffold via a gold-catalysed intramolecular alkynol cyclisation/hydroindolylation

A simple approach for the synthesis of pyridoindolone scaffolds with a spiroannulated tetrahydrofuran ring is described. The overall process comprises intramolecular sequential gold-catalysed 5-endo-dig alkynol cycloisomerization and subsequent addition of indole C2 to the in situ generated oxocarbenium cation.

Commercial Gold Complexes Supported on Functionalised Carbon Materials as Efficient Catalysts for the Direct Oxidation of Ethane to Acetic Acid

The single-pot efficient oxidation of ethane to acetic acid catalysed by Au(I) or Au(III) compounds, chlorotriphenylphosphinegold(I) (1), chlorotrimethylphosphinegold(I) (2), 1,3-bis(2,6-diisopropylphenyl)imidazol-2-ylidenegold(I) chloride (3), dichloro(2-pyridinecarboxylato)gold(III) (4), homogenous and supported on different carbon materials: activated carbon (AC), multi-walled carbon nanotubes (CNT) and carbon xerogel (CX), oxidised with nitric acid followed by treatment with NaOH (-ox-Na), is reported. The reactions were performed in water/acetonitrile. The materials were selective for the production of acetic acid, with no trace of by-products being detected. The best homogenous catalysts were complexes 2 and 3 which showed the highest ethane conversion and an acetic acid yield of ca. 21%, followed by 4 and 1. The heterogenised materials showed much better activity than the homogenous counterparts, with acetic acid yields up to 41.4% for 4@CNT-ox-Na, and remarkable selectivity (with acetic acid being the only product detected). The heterogenised catalysts with the best results were reused up to five cycles, with no significant loss of activity, and maintaining high selectivity for acetic acid. 4@CNT-ox-Na showed not only the best catalytic activity but also the best stability during the recycling runs.

Mechanistic Study on Gold(I)-Catalyzed Unsaturated Spiroketalization Reaction

Abstract:

The mechanism of metal-catalyzed spiroketalization of propargyl acetonide is explored by employing DFT with the B3LYP/6-31+G(d) method. Acetonide is used as a regioselective regulator in the formation of monounsaturated spiroketal. The energies of transition states, intermediates, reactants and products are calculated to provide new insight into the mechanism of the reaction. The energetic features, validation of the observed trends in regioselectivity are conferred in terms of electronic indices via FMO analysis. The presence of acetonide facilitates a stepwise spiroketalization as it masks the competing nucleophile, and thus hydroxyl group present, exclusively acts as a nucleophile. The vinyl gold intermediate 3 is formed from 2 via activation barrier TS1. This is the first ring formation, which is 6-exo-dig cyclization. The intermediate 3 is converted into allenyl ether 4, which isomerizes to the intermediate oxocarbenium ion 5 via activation barrier TS2. The intermediate 5 cyclizes to 6 via TS3. This is the second ring formation. The intermediate 6 on protodeauration turns into 6,6-monounsaturated spiroketal 7. It is concluded that acetonide as a protecting group serves the purpose, and thus a wide range of spiroketals can be prepared, regioselectivity.

Synthesis of disubstituted furans catalysed by [(AuCl)2(μ-bis(phosphino)metallocene)] and Na[BArF24]

Two new gold compounds with bis(phosphino)metallocene ligands were prepared and characterized by NMR and X-ray crystallography. These and related compounds are catalysts in formation of disubstituted furans from terminal alkynes and pyridine-N-oxide.

Sterically Crowded Tris(2-(trimethylsilyl)phenyl)phosphine - Is it Still a Ligand?

Tris(2-(trimethylsilyl)phenyl)phosphine, P( o -TMSC 6 H 4 ) 3 , was synthesised and characterised in solution and in the solid state. The large steric bulk prevents most reactions of the phosphorus donor and makes the compound air stable both in the solid state as well as in solution. This shielded phosphine can still undergo three reactions, namely protonation, oxidation to the phosphine oxide under harsh conditions and complexation to Au I , thus forming a complex with linear coordination. Unexpectedly, complexation was unsuccessful with a range of other metal cations. Neither Pd II , Pt II , Zn II nor Hg II reacted and even the remaining coinage metal cations Cu I and Ag I could not be coordinated. Both the parent molecule as well as the reaction products were structurally characterised by single crystal X-ray di raction, and the conformational change of geometry required to accommodate the additional atoms was analysed in detail. Apart from chemical oxidation with H 2 O 2 , P( o -TMSC 6 H 4 ) 3 displays reversible electrochemical oxidation with a potential not unlike the one of sterically unencumbered phosphines for which the oxidation is usually not reversible. P( o -TMSC 6 H 4 ) 3 can thus be considered a model compound for the investigation of the electronic properties of sterically unencumbered phosphines.

Divergent and Modular Synthesis of Terpenoid Scaffolds via a AuI Catalyzed One-Pot Cascade

A one-pot cascade sequence to generate synthetically challenging polycyclic scaffolds is reported utilizing a novel Lewis acid gold catalyst for the key cyclization step, enabling the divergent synthesis of both 6,6,5-tricyclic and 6,6,6,5-tetracyclic cores through both ligand and reaction condition control. We have combined the intrinsic complexity and stereoselectivity of cycloadditions with the electronic and steric properties of gold complexes to selectively generate complex polycyclic scaffolds in a single operation.

A Zwitterionic Heterobimetallic Gold-Iron Complex Supported by Bis(N-Heterocyclic Imine)Silyliumylidene

The facile synthesis of the first bis-N-heterocyclic imine-stabilized chlorosilyliumylidene 1 is reported. Remarkably, consecutive reaction of 1 with PPh3 AuCl and K2 Fe(CO)4 gives rise to the unique heterobimetallic complex 1,2-(Mes NHI)2 -C2 H4 -ClSiAuFe(CO)4 (4). The overall neutral complex 4 bears an unusual linear Si-Au-Fe structure and a rare anagostic interaction between the d10 -configured gold atom and a CH bond of the mesityl ligand. According to the computational analysis and 57 Fe Mössbauer spectroscopy, the formal Fe-oxidation state remains at -II. Thus, the electronic structure of 4 is best described as an overall neutral-yet zwitterionic-heterobimetallic "Si(II)+ -Au(I)+ -Fe(-II)2- "-silyliumylidene complex, derived from double anion exchange. The computational analysis indicates strong hyperconjugative back donation from the gold(I) atom to the silyliumylidene ligand.

In vivo organic synthesis by metal catalysts

The metal-catalyzed reactions have given various chemical modifications that could not be achieved through basic organic chemistry reactions. In the past decade, many metal-mediated catalytic systems have carried out different transformations in cellulo, such as decaging of fluorophores, drug release, and protein conjugation. However, translating abiotic metal catalysts for organic synthesis in vivo, including bacteria, zebrafish, or mice, could encounter numerous challenges regarding their biocompatibility, stability, and reactivity in the complicated biological environment. In this review, we categorize and summarize the relevant advances in this research field by emphasizing the system's framework, the design of each transformation, and the mode of action. These studies disclose the massive potential of the emerging field and the significant applications in synthetic biology.

Au⋅⋅⋅H-C Hydrogen Bonds as Design Principle in Gold(I) Catalysis

Secondary ligand-metal interactions are decisive in many catalytic transformations. While arene-gold interactions have repeatedly been reported as critical structural feature in many high-performance gold catalysts, we herein report that these interactions can also be replaced by Au⋅⋅⋅H-C hydrogen bonds without suffering any reduction in catalytic performance. Systematic experimental and computational studies on a series of ylide-substituted phosphines featuring either a PPh3 (Ph YPhos) or PCy3 (Cy YPhos) moiety showed that the arene-gold interaction in the aryl-substituted compounds is efficiently compensated by the formation of Au⋅⋅⋅H-C hydrogen bonds. The strongest interaction is found with the C-H moiety next to the onium center, which due to the polarization results in remarkably strong interactions with the shortest Au⋅⋅⋅H-C hydrogen bonds reported to date. Calorimetric studies on the formation of the gold complexes further confirmed that the Ph YPhos and Cy YPhos ligands form similarly stable complexes. Consequently, both ligands showed the same catalytic performance in the hydroamination, hydrophenoxylation and hydrocarboxylation of alkynes, thus demonstrating that Au⋅⋅⋅H-C hydrogen bonds are equally suited for the generation of highly effective gold catalysts than gold-arene interactions. The generality of this observation was confirmed by a comparative study between a biaryl phosphine ligand and its cyclohexyl-substituted derivative, which again showed identical catalytic performance. These observations clearly support Au⋅⋅⋅H-C hydrogen bonds as fundamental secondary interactions in gold catalysts, thus further increasing the number of design elements that can be used for future catalyst construction.

N-Heterocyclic silylenes in coinage metal chemistry: an account of recent advances

This article intends to highlight and comprehensively summarize the recent developments in the field of silylene-coinage metal chemistry. Recent years have witnessed exponential growth in the utilization of N-heterocyclic silylenes as ligands in transition metal chemistry. Still, silylene-coinage metal complexes have only started to appear very recently. Particular attention is focused on the synthetic approaches to silylene-coinage metal complexes and their unusual properties derived from the spectroscopic and crystallographic data. Recent studies have demonstrated that silylene-coinage metal complexes exhibit catalytic efficiency towards hydrosilylation, copper-catalyzed alkyne azide cycloaddition (CuAAC), and glycosidation reactions. Although the chemistry of silylene-coinage metal complexes has only begun to blossom, these findings justify the need for a review at this stage of development. This article will summarize the previous work on silylene-coinage metal complexes followed by recent advances and conclude with future possibilities.

Computational prediction of Au(I)-Pb(II) bonding in coordination complexes and study of the factors affecting the formation of Au(I)-E(II) (E = Ge, Sn, Pb) covalent bonds

We have studied computationally the Au-M (M = Ge, Sn, Pb) bonding trends in a series of model systems [(PH3)3Au-(MCl3)] (M = Ge (4), Sn (5), Pb (6)). For this, we have fully optimized the model systems at the MP2 level of theory, computing the Au-M bonding energy at the equilibrium distances applying the counterpoise (cp) correction to the basis-set superposition error (BSSE) and performing a natural energy decomposition analysis (NEDA). Furthermore, a topological analysis of the electron density using QTAIM, ELF and DORI tools was performed. In order to provide further insights on the possibility of predicting the existence of Au(i)-Pb(ii) donor bonds, Density Functional Theory calculations using the pbe functional and including dispersion corrections (DFT-D3/pbe) were performed on three model systems, [(PR3)3Au-(PbCl3)] (R = CH3 (7), H (8), CF3 (9)). This study also includes the corresponding NEDA calculations and the topological analysis of the electron density, which provides information about the Au-Pb bond, but also about the supporting weak ligand-ligand interactions. Overall, the study provides information about the factors affecting the formation of stabilizing Au(i)-Pb(ii) covalent bonds.

Theoretical Insights into [NHC]Au(I) Catalyzed Hydroalkoxylation of Allenes: A Unified Reaction Valley Approach Study

Hydroxylation is an effective approach for the synthesis of carbon-oxygen bonds and allylic ethers. The [NHC]Au(I) catalyzed intermolecular hydroalkoxylation of allene was studied at the DFT and Coupled Cluster level of theory. Using the Unified Reaction Valley Approach (URVA), we carry out a comprehensive mechanistic analysis of [NHC]Au(I)-catalyzed and noncatalyzed reactions. The URVA study of several possible reaction pathways reveal that the [NHC]Au(I) catalyst enables the hydroalkoxylation reaction to occur via a two step mechanism based upon the Au ability to switch between π- and σ-complexation. The first step of the mechanism involves the formation of a CO bond after the transition state with no energy penalty. Following the CO bond breakage, the OH bond breaks and CH bond forms during the second step of the mechanism, as the catalyst transforms into the more stable π-Au complex. The URVA results were complemented with local vibrational mode analysis to provide measures of intrinsic bond strength for Au(I)-allene interactions of all stationary points, and NBO analysis was applied in order to observe charge transfer events along the reaction pathway. Overall, the π-Au C═C interactions of the products are stronger than those of the reactants adding to their exothermicity. Our work on the hydroxylation of allene provides new insights for the design of effective reaction pathways to produce allylic ethers and also unravels new strategies to form C-O bonds by activation of C═C bonds.

Gold-Catalyzed Synthetic Strategies towards Four-Carbon Ring Systems

Four carbon ring systems are frequently present in natural products with remarkable biological activities such as terpenoids, alkaloids, and steroids. The development of new strategies for the assembly of these structures in a rapid and efficient manner has attracted the interest of synthetic chemists for a long time. The current research is focused mainly on the development of synthetic methods that can be performed under mild reaction conditions with a high tolerance to functional groups. In recent years, gold complexes have turned into excellent candidates for this aim, owing to their high reactivity, and are thus capable of promoting a wide range of transformations under mild conditions. Their remarkable efficiency has been thoroughly demonstrated in the synthesis of complex organic molecules from simple starting materials. This review summarizes the main synthetic strategies described for gold-catalyzed four-carbon ring formation, as well as their application in the synthesis of natural products.

Gold-catalyzed dual C-C bond cleavage of biphenylenes bearing a pendant alkyne at ambient temperature

We report a catalytic skeletal rearrangement of biphenylenes with a pendant alkyne moiety at room temperature by a cationic gold catalyst, which involves the cleavage of two bonds: the C-C bond of biphenylene and the C(sp)-C(sp2 or sp3) bond. Experimental and theoretical studies revealed that the reaction mechanism included π-activation of the alkyne, ring expansion and 1,2-carbon shift.

Hot Electrons, Hot Holes, or Both? Tandem Synthesis of Imines Driven by the Plasmonic Excitation in Au/CeO2 Nanorods

Solar-to-chemical conversion via photocatalysis is of paramount importance for a sustainable future. Thus, investigating the synergistic effects promoted by light in photocatalytic reactions is crucial. The tandem oxidative coupling of alcohols and amines is an attractive route to synthesize imines. Here, we unravel the performance and underlying reaction pathway in the visible-light-driven tandem oxidative coupling of benzyl alcohol and aniline employing Au/CeO₂ nanorods as catalysts. We propose an alternative reaction pathway for this transformation that leads to improved efficiencies relative to individual CeO₂ nanorods, in which the localized surface plasmon resonance (LSPR) excitation in Au nanoparticles (NPs) plays an important role. Our data suggests a synergism between the hot electrons and holes generated from the LSPR excitation in Au NPs. While the oxygen vacancies in CeO₂ nanorods trap the hot electrons and facilitate their transfer to adsorbed O₂ at surface vacancy sites, the hot holes in the Au NPs facilitate the α-H abstraction from the adsorbed benzyl alcohol, evolving into benzaldehyde, which then couples with aniline in the next step to yield the corresponding imine. Finally, cerium-coordinated superoxide species abstract hydrogen from the Au surface, regenerating the catalyst surface.

Gold Catalyzed Decarboxylative Cross-Coupling of Iodoarenes

This report details a decarboxylative cross-coupling of (hetero)aryl carboxylates with iodoarenes in the presence of a gold catalyst (>25 examples, up to 96% yield). This reaction is site specific, which overcomes prior limitations associated with gold catalyzed oxidative coupling reactions. The reactivity of the (hetero)aryl carboxylate correlates qualitatively to the field effect parameter (F_ortho). Reactions with isolated gold complexes and DFT calculations support a mechanism proceeding through oxidative addition at a gold(I) cation with decarboxylation being viable at either a gold(I) or a silver(I) species.

Exploring the Mechanism of Catalysis with the Unified Reaction Valley Approach (URVA)—A Review

The unified reaction valley approach (URVA) differs from mainstream mechanistic studies, as it describes a chemical reaction via the reaction path and the surrounding reaction valley on the potential energy surface from the van der Waals region to the transition state and far out into the exit channel, where the products are located. The key feature of URVA is the focus on the curving of the reaction path. Moving along the reaction path, any electronic structure change of the reacting molecules is registered by a change in their normal vibrational modes and their coupling with the path, which recovers the curvature of the reaction path. This leads to a unique curvature profile for each chemical reaction with curvature minima reflecting minimal change and curvature maxima, the location of important chemical events such as bond breaking/forming, charge polarization and transfer, rehybridization, etc. A unique decomposition of the path curvature into internal coordinate components provides comprehensive insights into the origins of the chemical changes taking place. After presenting the theoretical background of URVA, we discuss its application to four diverse catalytic processes: (i) the Rh catalyzed methanol carbonylation—the Monsanto process; (ii) the Sharpless epoxidation of allylic alcohols—transition to heterogenous catalysis; (iii) Au(I) assisted [3,3]-sigmatropic rearrangement of allyl acetate; and (iv) the Bacillus subtilis chorismate mutase catalyzed Claisen rearrangement—and show how URVA leads to a new protocol for fine-tuning of existing catalysts and the design of new efficient and eco-friendly catalysts. At the end of this article the pURVA software is introduced. The overall goal of this article is to introduce to the chemical community a new protocol for fine-tuning existing catalytic reactions while aiding in the design of modern and environmentally friendly catalysts.

Mild and Efficient Synthesis of Diverse Organo-AuI -L Complexes in Green Solvents

An exceptionally mild and efficient method was developed for the preparation of (hetero)aryl-Au^I -L complexes using ethanol or water as the reaction medium at room temperature and Ar-B(triol)K boronates as the transmetalation partner. The reaction does not need an exogeneous base or other additives, and quantitative yields can be achieved through a simple filtration as the only required purification method, which obviates considerable waste associated with alternative workup methods. A broad reaction scope was demonstrated with respect to both the L and (hetero)aryl ligands on product Au complexes. Despite the polar reaction medium, large polycyclic aromatic hydrocarbon units can be incorporated on the Au complexes in very good to excellent yields. The approach was demonstrated for the chemoselective manipulation of orthogonally protected aryl boronates to afford a new class of N-heterocyclic carbene-Au-aryl complexes. A mechanistic rationale was proposed.