Removal of imidacloprid pesticide using nanoporous activated carbons produced via pyrolysis of peach stone agricultural wastes

Agricultural biomass/waste-based materials could be a potential adsorption-type remediation contributor to environmental pollution induced by pesticides-A critical review

The widespread use of pesticides that are inevitable to keep the production of food grains brings serious environmental pollution problems. Turning agricultural biomass/wastes into materials addressing the issues of pesticide contaminants is a feasible strategy to realize the reuse of wastes. Several works summarized the current applications of agricultural biomass/waste materials in the remediation of environmental pollutants. However, few studies systematically take the pesticides as an unitary target pollutant. This critical review comprehensively described the remediation effects of crop-derived waste (cereal crops, cash crops) and animal-derived waste materials on pesticide pollution. Adsorption is considered a superior and highlighted effect between pesticides and materials. The review generalized the sources, preparation, characterization, condition optimization, removal efficiency and influencing factors analysis of agricultural biomass/waste materials. Our work mainly emphasized the promising results in lab experiments, which helps to clarify the current application status of these materials in the field of pesticide remediation. In the meantime, rigorous pros and cons of the materials guide to understand the research trends more comprehensively. Overall, we hope to achieve a large-scale use of agricultural biomass/wastes.

Novel High-Performance Functionalized and Grafted Bio-Based Chitosan Adsorbents for the Efficient and Selective Removal of Toxic Heavy Metals from Contaminated Water

Novel functionalized and/or grafted crosslinked chitosan adsorbents were synthesized and used to remove several toxic heavy metal ions such as nickel, lead, chromium, and cadmium ions from contaminated water. The chitosan biopolymer was functionalized by maleic anhydride (CS_MA) acting also as a crosslinking agent. Glutaraldehyde-crosslinked chitosan (CS_GA) grafted with poly(methyl methacrylate) (CS_MMA) was also synthesized. The synthesized adsorbents were characterized using a variety of analytical techniques such as SEM, TGA, and FTIR, which confirmed their chemical structures and morphology. The adsorption capacity of the adsorbents was analyzed under various conditions of contact time, adsorbent dose, initial concertation, temperature, and pH and evaluated against those of pure chitosan (CS) and the crosslinked chitosan(CS_GA). The ultimate removal conditions were 0.5 g/100 mL adsorbent dose, an initial metal ion concentration of 50 ppm, a temperature of 45 °C, and pH 9. CS_MMA had the highest removal percentages for all metal ions, ranging from 92% to 94%. The adsorption was demonstrated to fit a pseudo-first-order model that followed a Langmuir adsorption isotherm. The results highlight the capacity of the synthesized polymers to efficiently remove major toxic contaminants at low cost from contaminated water, present especially in low-income areas, without harming the environment.

Effective removal of acetamiprid and eosin Y by adsorption on pristine and modified MIL-101(Fe)

In this work, the efficacy of two metal-organic frameworks (MIL-101(Fe) and NH2-MIL-101(Fe)) in eliminating acetamiprid (ATP) insecticide and eosin Y (EY) dye from aqueous solution is tested. An analysis was conducted on the developed nanocomposite's optical, morphological, and structural characteristics. The adsorption isotherm, kinetics, thermodynamics, reusability, and mechanisms for ATP and EY dye removal were assessed. NH2-MIL-101(Fe) adsorbed 76% and 90% of ATP pesticide and EY dye, respectively after 10 to 15 min in optimum conditions. For both adsorbents, with regard to explaining the isotherm data, the Langmuir model offered the most accurate description. Moreover, the adsorption of ATP and EY dye is described by the pseudo-second-order kinetic model. The maximum adsorption capacities of ATP and EY dye on MIL-101(Fe) were 57.6 and 48.9 mg/g compared to 70.5 and 97.8 mg/g using NH2-MIL-101(Fe). The greatest amount of ATP and EY dye clearance was obtained at a neutral medium for both adsorbents. The results of this investigation demonstrate the effectiveness of MIL-101(Fe) and NH2-MIL-101(Fe) as effective substances in the adsorption process for removing pesticides and dyes from aqueous solution.

Nano/micro-cellulose-based materials as remarkable sorbents for the remediation of agricultural resources from chemical pollutants

Overusing pesticides, fertilizers, and synthetic dyes has significantly increased their presence in various parts of the environment. The transportation of these pollutants into agricultural soil and water through rivers, soils, and groundwater has seriously threatened human and ecosystem health. Applying techniques and materials to clean up agricultural sources from pesticides, heavy metals (HMs), and synthetic dyes (SDs) is one of the major challenges in this century. The sorption technique offers a viable solution to remediate these chemical pollutants (CHPs). Cellulose-based materials have become popular in nano and micro scales because they are widely available, safe to use, biodegradable, and have a significant ability to absorb substances. Nanoscale cellulose-based materials exhibit greater capacity in absorbing pollutants compared to their microscale counterparts because they possess a larger surface area. Many available hydroxyl groups (-OH) and chemical and physical modifications enable the incorporation of CHPs on to cellulose-based materials. Following this potential, this review aims to comprehensively summarize recent advancements in the field of nano- and micro-cellulose-based materials as effective adsorbents for CHPs, given the abundance of cellulosic waste materials from agricultural residues. The recent developments pertaining to the enhancement of the sorption capacity of cellulose-based materials against pesticides, HMs, and SDs, are deliberated.

Biochar Derived from Pineapple Leaf Non-Fibrous Materials and Its Adsorption Capability for Pesticides

Non-fibrous materials (NFMs) are typically discarded during pineapple leaf fiber processing. The underutilized NFM waste was proposed for use in this work as a raw material for the production of biochar . The removal of pesticides (acetamiprid, imidacloprid, or methomyl) from water was then investigated using the NFM derived biochar (NFMBC). The pseudo-second-order kinetic data suggested chemisorption of pesticide on NFMBC. While acetamiprid or imidacloprid adsorption on NFMBC occurred primarily via multi-layered adsorption (best fitted with the Freundlich isotherms), the Sips adsorption isotherms matched with the experimental data, implying heterogeneous adsorption of methomyl on the biochar surface. The adsorption capacities for acetamiprid, methomyl, and imidacloprid are 82.18, 36.16, and 28.98 mg g^-1, respectively, which are in agreement with the order of the polarity (low to high) of pesticides. Adsorption capacities indicated that the NFMBC preferably removed low-polarity pesticides from water sources. Since pineapple leaves provide fibers and NFMs for materials development, this study should promote an extended agro-waste utilization approach and full-cycle resource management in pineapple fields.

Mono- and Multicomponent Biosorption of Caffeine and Salicylic Acid onto Processed Cape Gooseberry Husk Agri-Food Waste

There is an increasing need to find cost-effective and sustainable solutions for treating wastewater from contaminants of emerging concern (CECs). In this regard, cape gooseberry husk-typically an agri-food waste-is investigated for the first time as a potential biosorbent for the removal of model pharmaceutical contaminants of caffeine (CA) and salicylic acid (SA) from water. Three different preparations of husks were investigated and characterized using Fourier transform infrared spectroscopy, scanning electron microscopy, Brunauer-Emmett-Teller analysis, zeta potential, and point of zero charge measurements. The activation of the husk led to an increase in the surface area, pore volume, average pore size, and adsorption favorability. The single-component adsorption of SA and CA onto the three husks was investigated at different initial concentrations and pH values to determine the optimal operating conditions. The maximal removal efficiencies of SA and CA reached up to 85 and 63%, respectively, for the optimal husk which also offers a less energy-intensive option in its activation. This husk also exhibited high rates of adsorption that exceeded other husk preparations by up to four times. It was proposed that CA interacts electrostatically with the husk, while SA binds through weak physical interactions (e.g., van der Waals and H-bonding). In binary systems, CA adsorption was highly favored over SA adsorption, owing to its electrostatic interactions. The selectivity coefficients α_SA^CA varied with initial concentration and ranged between 61 and 627. The regeneration of husk was also successful resulting in its re-use for up to four full consecutive cycles, further demonstrating the efficiency of cape gooseberry husk use in wastewater treatment.

An inclusive outlook on the fate and persistence of pesticides in the environment and integrated eco-technologies for their degradation

Intensive and inefficient exploitation of pesticides through modernized agricultural practices has caused severe pesticide contamination problems to the environment and become a crucial problem over a few decades. Due to their highly toxic and persistent properties, they affect and get accumulated in non-target organisms, including microbes, algae, invertebrates, plants as well as humans, and cause severe issues. Considering pesticide problems as a significant issue, researchers have investigated several approaches to rectify the pesticide contamination problems. Several analyses have provided an extensive discussion on pesticide degradation but using specific technology for specific pesticides. However, in the middle of this time, cleaner techniques are essential for reducing pesticide contamination problems safely and environmentally friendly. As per the research findings, no single research finding provides concrete discussion on cleaner tactics for the remediation of contaminated sites. Therefore, in this review paper, we have critically discussed cleaner options for dealing with pesticide contamination problems as well as their advantages and disadvantages have also been reviewed. As evident from the literature, microbial remediation, phytoremediation, composting, and photocatalytic degradation methods are efficient and sustainable and can be used for treatment at a large scale in engineered systems and in situ. However, more study on the bio-integrated system is required which may be more effective than existing technologies.

A Review on the Potential Bioactive Components in Fruits and Vegetable Wastes as Value-Added Products in the Food Industry

The food production industry is a significant contributor to the generation of millions of tonnes of waste every day. With the increasing public concern about waste production, utilizing the waste generated from popular fruits and vegetables, which are rich in high-added-value compounds, has become a focal point. By efficiently utilizing food waste, such as waste from the fruit and vegetable industries, we can adopt a sustainable consumption and production pattern that aligns with the Sustainable Development Goals (SDGs). This paper provides an overview of the high-added-value compounds derived from fruit and vegetable waste and their sources. The inclusion of bioactive compounds with antioxidant, antimicrobial, and antibrowning properties can enhance the quality of materials due to the high phenolic content present in them. Waste materials such as peels, seeds, kernels, and pomace are also actively employed as adsorbents, natural colorants, indicators, and enzymes in the food industry. Therefore, this article compiles all consumer-applicable uses of fruit and vegetable waste into a single document.

Iron-modified biochar derived from sugarcane bagasse for adequate removal of aqueous imidacloprid: sorption mechanism study

Adsorption has been considered as a promising remediation technology to separate organic and inorganic agrochemicals from contaminated soil and water. Low-cost adsorbents, including waste derived materials, clay composites, biochar, and biochar modified materials, have attracted enormous attention for the removal of organic contaminants, including pesticides. In this study, iron-modified base-activated biochar (FeBBC) was prepared by pyrolysis (at 400 °C for 1 h) of iron-doped base (KOH) activated sugarcane bagasse for the removal of a widely used insecticide, namely imidacloprid (IMI) from water. The maximum adsorption capacity of the adsorbent (FeBBC) was calculated as 10.33 (± 1.57) mg/g from Langmuir isotherm model. The adsorbents could remove up to ~ 92% of IMI from aqueous solution at 23.8 mg/L IMI. Experimental data fitted well with the Freundlich model and pseudo-second-order model, demonstrating physisorption, as well as chemosorption, contributed to the sorption process. Even at highly acidic/basic solution pH, the FeBBC could remove substantial amount of IMI demonstrating hydrophobic interaction and pore diffusion play vital role for removal of IMI. The slight improving of IMI sorption with increasing solution pH indicated the sorption was also facilitated through ionic interaction alongside physical sorption. However, physical sorption including hydrophobic interaction and pore-filling interaction plays a vital role in the sorption of IMI.

Synthesis of monolith silica anchored graphene oxide composite with enhanced adsorption capacities for carbofuran and imidacloprid

Highly efficient adsorbent was prepared for the removal of carbofuran and imidacloprid pesticides from wastewater. The silica monolith anchored graphene oxide composite was synthesized by the modified Fischer esterification protocol. The composite showed improved adsorption capacity for the removal of pesticides from wastewater. Graphene oxide was synthesized using the modified Hummer's method, while the silica monolith was prepared via sol-gel method. The composite was characterized via X-ray diffraction, Fourier transform infra-red, Brunauer Emmett and Teller (BET/BJH) analysis, zeta potential, and FESEM imaging. Different adsorption parameters such as pH, contact time, adsorbate and adsorbent concentration, and temperature were optimized for the adsorption of pesticides. The equilibrium and kinetic models were applied to the adsorption process of the pesticides. Qe of the composite as found to be 342.46 mg g^-1 for imidacloprid and 37.15 mg g^-1 for carbofuran. The adsorption process followed the pseudo 2nd order kinetic model for carbofuran (R²~0.9971) and imidacloprid (R²~0.9967). The Freundlich isotherm best fitted to the adsorption data of the pesticides with R² value of 0.9956 for carbofuran and 0.95 for imidacloprid. The resultant adsorbent/composite material came out with very good results for the removal of pesticides.

Proficient exclusion of pesticide using humic acid-modified magnetite nanoparticles from aqueous solution

Extensive dispersal of the pesticides to shield the different types of vegetation from pests has increased the production but at the same it has resulted in an increase in environmental pollution. Consequently, it is necessary to eliminate these undesired pollutants from the environment. The current investigation offers the synthesis of humic acid-coated magnetite nanoparticles towards effective removal of the most common insecticide, imidacloprid, from aqueous solution using a batch adsorption method. These synthesized nanoparticles were characterized with the help of several analytical and spectroscopic techniques. To acquire the maximum conceivable adsorption, effects of different influencing parameters like pH of the solution, time of contact, concentration of pesticide solution, amount of adsorbent and temperature were also examined. Moreover, the kinetic studies were found to be in good agreement with a pseudo-second-order kinetic model supporting the occurrence of chemisorption phenomenon. Additionally, isotherm modeling proved that the adsorption process was in accordance with the Langmuir model of isotherm. Thermodynamic parameters depicted the endothermic and spontaneous behavior of the adsorption process. Desorption studies were also carried out to examine the reusability of these nano-adsorbents. These verdicts confirmed that the surface modified magnetite nanoparticles may be treated as proficient material for exclusion of imidacloprid from the aqueous solution.

MFI, BEA and FAU zeolite scavenging role in neonicotinoids and radical species elimination

Ecotoxicity caused by neonicotinoid pesticides is largely due to oxidative stress on non-target species. Due to the fact that reactive radical species reach the environment, materials intended for pesticide removal should be applicable for the simultaneous removal of reactive radicals, as well. This work uses the spectroscopic, adsorptive and antioxidant responses from MFI, FAU and BEA zeolites as descriptors of their potential environmental importance. Different network structures and Si/Al ratios were correlated with excellent zeolite adsorption properties, as over 200 mg g^-1 of investigated neonicotinoids, acetamiprid and imidacloprid, was achieved in one cycle. Additionally, after two regeneration steps, over 450 mg g^-1 adsorbed pesticides were retained, in three adsorption cycles. Overall the best results were detected for the FAU zeotype in both tested applications, insecticide adsorption and radical-scavenging performance, with and without insecticides present. The proposed mechanism for adsorption relies on kinetic investigation, isotherm modelling and spectroscopic post-adsorption analysis and targets zeolite hydroxyl/siloxane groups as active sites for insecticide adsorption via hydrogen bonding. Neat, well-defined zeolite structures enable their prospective application in ecotoxic species removal.

Identification of Active Species in Photodegradation of Aqueous Imidacloprid over g-C3N4/TiO2 Nanocomposites

In this work, g-C3N4/TiO2 composites were fabricated through a hydrothermal method for the efficient photocatalytic degradation of imidacloprid (IMI) pesticide. The composites were fabricated at varying loading of sonochemically exfoliated g-C3N4 (denoted as CNS). Complementary characterization results indicate that the heterojunction between the CNS and TiO2 formed. Among the composites, the 0.5CNS/TiO2 material gave the highest photocatalytic activity (93% IMI removal efficiency) under UV-Vis light irradiation, which was 2.2 times over the pristine g-C3N4. The high photocatalytic activity of the g-C3N4/TiO2 composites could be ascribed to the band gap energy reduction and suppression of photo-induced charge carrier recombination on both TiO2 and CNS surfaces. In addition, it was found that the active species involved in the photodegradation process are OH• and holes, and a possible mechanism was proposed. The g-C3N4/TiO2 photocatalysts exhibited stable photocatalytic performance after regeneration, which shows that g-C3N4/TiO2 is a promising material for the photodegradation of imidacloprid pesticide in wastewater.

Application of Sludge-Based Activated Carbons for the Effective Adsorption of Neonicotinoid Pesticides

The amount of sludge produced in wastewater treatment plants (WWTPs) has increased over the years, and the methods used to reduce this waste, such as incineration, agricultural use, or disposal in landfills, cause problems of secondary pollution. For this reason, it is necessary to find sustainable and low-cost solutions to manage this waste. Additionally, emerging and priority pollutants are attracting attention from the scientific community as they can generate health problems due to inadequate removal in conventional WWTPs. In this work, a pharmaceutical industry sludge was used as a precursor in the synthesis of four activated carbons (ACs) using different activating agents (ZnCl2, FeCl3∙6H2O, Fe(NO3)3∙9H2O, and Fe(SO4)3∙H2O), to be used for the removal by adsorption of three neonicotinoid pesticides included in latest EU Watch List (Decision 2018/840): acetamiprid (ACT), thiamethoxam (THM), and imidacloprid (IMD). The prepared ACs showed micro–mesoporous properties, obtaining relatively slow adsorption kinetics to reach equilibrium, but despite this, high values of adsorption capacity (qe) were obtained. For example, for AC-ZnCl2 (SBET = 558 m2/g), high adsorption capacities of qe = 128.9, 126.8, and 166.1 mg/g for ACT, THM, and IMD, respectively, were found. In most cases, the adsorption isotherms showed a multilayer profile, indicating an important contribution of the mesoporosity of the activated carbons in the adsorption process.

Poly(β-cyclodextrin)-Activated Carbon Gel Composites for Removal of Pesticides from Water

Pesticides are widely used in agriculture to increase and protect crop production. A substantial percentage of the active substances applied is retained in the soil or flows into water courses, constituting a very relevant environmental problem. There are several methods for the removal of pesticides from soils and water; however, their efficiency is still a challenge. An alternative to current methods relies on the use of effective adsorbents in removing pesticides which are, simultaneously, capable of releasing pesticides into the soil when needed. This reduces costs related to their application and waste treatments and, thus, overall environmental costs. In this paper, we describe the synthesis and preparation of activated carbon-containing poly(β-cyclodextrin) composites. The composites were characterized by different techniques and their ability to absorb pesticides was assessed by using two active substances: cymoxanil and imidacloprid. Composites with 5 and 10 wt% of activated carbon showed very good stability, high removal efficiencies (>75%) and pesticide sorption capacity up to ca. 50 mg g-1. The effect of additives (NaCl and urea) was also evaluated. The composites were able to release around 30% of the initial sorbed amount of pesticide without losing the capacity to keep the maximum removal efficiency in sorption/desorption cycles.