Amide-mediated enhancement of sorption efficiency of trivalent f-elements on functionalized carbon nanotube: Evidence of physisorption

Superfast adsorption of small and uncharged urea from water using post-sonicated iron-based metal-organic framework

Urea is widely used in fertilizer production for agricultural purposes which risks runoff into soil and water sources. An excess of urea can result in algal or toxic blooms which can poison wildlife or even humans by accumulation in food sources. The removal of urea from water is challenging due to the small size (0.254 nm) and uncharged surface of urea. Intensive research has been conducted on a variety of methods to remove environmental concentrations of urea using adsorbents, but most of them lack effective removal, require long (>2 h) process time, and lack re-generability. Metal-organic frameworks (MOFs) are the new generation of adsorbents with excellent structural and functional group tunability. In this study, we synthesized MIL-100 (Fe), an iron-based MOF, as an efficient adsorbent for the removal of uncharged urea from water. The urea adsorption capacity of MIL-100 (Fe) was tested under varying experimental conditions such as pH (2-10), temperature (25-65 °C), MOF concentration (25-400 ppm), and urea concentration (25-1000 ppm). The results showed the superfast adsorption (more than 85% removal within 2 min) of neutrally charged urea molecules on MIL-100 (Fe). The MOF was able to reach a maximum adsorption efficiency of around 85% with a maximum uptake capacity of 3321 mg/g. The MIL-100 (Fe) showed acceptable re-generability by retaining up to 90% removal efficiency after four regeneration cycles. The urea adsorption followed pseudo 2nd-order adsorption kinetics and dipole-dipole interactions and π-NH bonding were the primary adsorption mechanism.

Efficient remediation of chlorpyrifos pesticide from contaminated water by superparamagnetic adsorbent based on Arabic gum-grafted-polyamidoxime

A novel organic/inorganic biosorbent hydrogel nanocomposite based on Arabic Gum-grafted-polyamidoxime and CuFe₂O₄ magnetic nanoparticles (AG-g-PAO/CuFe₂O₄) was prepared in three steps. The prepared hydrogel nanocomposite was well characterized using Fourier transform infrared (FT-IR), energy-dispersive X-ray analysis (EDX), scanning electron microscopy (SEM), X-ray diffraction (XRD), thermogravimetric analysis (TGA), vibrating sample magnetometer (VSM), CHN, zeta potential, and Brunauer-Emmett-Teller (BET) analyses. The adsorption efficiency of the AG-g-PAO/CuFe₂O₄ for removing an organophosphorus pesticide (OPP) (chlorpyrifos) from aqueous solutions was studied. Effect of different experimental conditions such as the pH of the solution, adsorbent dosage, contact time, initial concentration on adsorption efficiency was evaluated. The experimental adsorption data described well by the Langmuir isotherm model and the maximum adsorption capacity (Q_max) of the prepared biosorbent for chlorpyrifos was found 769.23 mg/g. The adsorption kinetic data were well fitted by the pseudo-second-order model. It was suggested that the chlorpyrifos was adsorbed onto AG-g-PAO/CuFe₂O₄ hydrogel biosorbent mainly through electrostatic interaction and hydrogen bonding. The result of adsorption-desorption experiments revealed that the AG-g-PAO/CuFe₂O₄ can be excellently regenerated and reused after three sequential runs without a considerable decline in its adsorption performance.

Application of hybrid MOF composite in extraction of f-block elements: Experimental and computational investigation

An attempt was made to understand the sorption behaviour of UO₂²⁺, Th⁴⁺ and Eu³⁺ on novel hybrid metal-organic framework composites, FeBDC@CoBDC. The XRD pattern revealed the composite nature of the hybrid MOF materials, while FTIR and Raman spectroscopic analyses evidenced the presence of different functional moieties. The thermal stability of the hybrid MOF composites was investigated through thermogravimetric analysis. The sorption predominantly followed Langmuir isotherm with sorption capacity of 189 mg g^-1, 224 mg g^-1 and 205 mg g^-1 for UO₂²⁺, Th⁴⁺ and Eu³⁺ respectively. The sorption proceeded through chemisorption following pseudo 2^nd order rate kinetics. The processes were found to be thermodynamically favourable and endothermic in nature. However, they were entropically driven. Multiple contacts of complexing agents were necessary for quantitative elution of f-elements from loaded MOF. The MOF showed moderate stability towards radiation exposure. DFT calculation was used for the optimization of structures, estimation of bond length and estimation of binding energy. In hybrid MOF composites, the Fe atom was having six coordination with 4 O atoms of BDC moieties and 2 O atoms of -OH groups. The O atoms of BDC and -OH groups were coordinated to Eu, Th and U atoms during their sorption.

Exploring functionalized titania for task specific application of efficient separation of trivalent f-block elements

Functionalized titania, obtained by grafting the dipicolinic acid functionality, was explored for task specific application of highly efficient separation of trivalent f-block elements.

Understanding the sorption behaviour of Pu/U on zirconium phosphosilicate prepared by gelation route

Zirconium phosphosilicate (ZPS) has been prepared by gelation route for its ion exchange applications. ZPS was characterised by X-ray diffraction technique (XRD), thermogravimetry (TG), scanning electron microscopy (SEM), Fourier transformed Infrared Spectrometry (FTIR) and surface area analysis. K+ ion exchange behaviour was studied by pH titration. The material was found to extract Pu selectively over U from different mineral acids. Pu sorption behaviour on ZPS packed column was also been carried out. The pore volume was evaluated as 0.1336 mL g−1. The FTIR revealed the presence of –OH and PO4 3− groups on the surface of the material, while the SEM image indicates the irregular morphology and size of the sorbent. Different isotherm model: Langmuir, Freundlich, Dubinin–Rodushkevich and Temkin were used to understand the nature of sorption, while Lagergren 1st order, Intraparticle diffusion and pseudo 2nd order kinetics were used for modelling sorption kinetics. Suitable elution method was used for quantitative stripping of plutonium from sorbent. The radiolytic stability of the sorbent was evaluated upto 1500 kGy. A comparative evaluation of the sorption process has also been carried out with that reported in literature.