Influence of Fe3O4 nanoparticles decoration on dye adsorption and magnetic separation properties of Fe3O4/rGO nanocomposites

Magnetic Hydroxyapatite Nanoparticles in Regenerative Medicine and Nanomedicine

This review focuses on the latest advancements in magnetic hydroxyapatite (mHA) nanoparticles and their potential applications in nanomedicine and regenerative medicine. mHA nanoparticles have gained significant interest over the last few years for their great potential, offering advanced multi-therapeutic strategies because of their biocompatibility, bioactivity, and unique physicochemical features, enabling on-demand activation and control. The most relevant synthetic methods to obtain magnetic apatite-based materials, either in the form of iron-doped HA nanoparticles showing intrinsic magnetic properties or composite/hybrid compounds between HA and superparamagnetic metal oxide nanoparticles, are described as highlighting structure-property correlations. Following this, this review discusses the application of various magnetic hydroxyapatite nanomaterials in bone regeneration and nanomedicine. Finally, novel perspectives are investigated with respect to the ability of mHA nanoparticles to improve nanocarriers with homogeneous structures to promote multifunctional biological applications, such as cell stimulation and instruction, antimicrobial activity, and drug release with on-demand triggering.

Coupled adsorption-photocatalysis process for the removal of diclofenac using magnetite/reduced graphene oxide nanocomposite

Diclofenac (DCF) is frequently detected in water bodies (ng/L to g/L) as it is not completely removed by conventional wastewater treatment plants. Adsorption and photocatalysis have been studied as promising methods for treating DCF; however, both processes have limitations. Thus, in this study, the removal efficiency of DCF is evaluated using a magnetite/reduced graphene oxide (Fe3O4/RGO) nanocomposite via a coupled adsorption-catalysis process. The Fe3O4/RGO nanocomposite was successfully synthesized using a microwave-assisted solvothermal method and exhibited a bandgap of 2.60 eV. The kinetic data best fitted the Elovich model (R2 = 0.994, χ2 = 0.29), indicating rapid adsorption. The maximum DCF adsorption capacity calculated using the Langmuir model was 80.33 mg/g. An ultraviolet C (UVC) light source and 0.1 g/L of Fe3O4/RGO nanocomposite were the optimum conditions for the removal of DCF (C0 = 30 mM) by a coupled adsorption-photocatalysis process (first-order rate constant (k) = 0.088/min), which was greater than the single adsorption (k = 0.029/min) and pre-adsorption and post-photocatalysis (k = 0.053/min) processes. This indicates that the adsorbed DCF did not hamper the photocatalytic reaction of the Fe3O4/RGO nanocomposite, but rather enhanced the coupled adsorption-photocatalytic reaction. DCF removal efficiency was higher at acidic conditions (pH 4.3-5.0), because high H+ promotes the generation of certain reactive oxygen species (ROS) and increases of electrostatic interaction. The presence of NaCl and CaCl2 (10 mM) did not notably affect the total DCF removal efficiency; however, Ca2+ affected the initial DCF adsorption affinity. Scavenger experiments demonstrated O2∙- and h+ play a key ROS than ·OH to degrade DCF. The acute toxicity of DCF towards Aliivibrio fischeri gradually decreased with increasing treatment time.

Fabrication of polyethyleneimine functionalized magnetite nanoparticles for recyclable recovery of fucoidan from aqueous solution

Fucoidan is a kind of natural water-soluble fucose-rich sulfated polysaccharide with promising applications in the food and pharmaceutical industry. However, the traditional methods for fucoidan recovery from aqueous solution are expensive, time-consuming, and environmentally unfriendly. In this work, polyethyleneimine functionalized magnetite nanoparticles (PEI-MNPs) with well-defined core-shell structures were prepared by a Layer-by-Layer (LbL) approach using sodium tripolyphosphate (STPP) as a cross-linker. The as-prepared PEI-MNPs showed improved adsorption capability towards fucoidan at pH 4-8 due to the high density of cationic groups on the surfaces and the absence of internal pores. It was found that the adsorption process of fucoidan onto PEI-MNPs can reach to equilibrium in 50 min at room temperature. The maximum qe derived from the Langmuir isotherm at room temperature was 169.1 mg per g at a pH of 7. A selective fucoidan capture over a model protein BSA can be realized by adjusting pH (6-8) and salt concentration (0.5-2.5 M). The PEI-MNPs loading with fucoidan can be isolated from the final products by a neodymium magnet and regenerated by 4 M NaCl solution as stripping reagent. Therefore, this novel kind of PEI-MNP could be a promising candidate for highly efficient and recyclable recovery of fucoidan from an aqueous solution.

High-efficient adsorption for versatile adsorbates by elastic reduced graphene oxide/Fe3O4 magnetic aerogels mediated by carbon nanotubes

Fabrication of highly elastic three-dimensional aerogel adsorbents with outstanding adsorption capacities is a long pursuit for the treatment of industrial contaminated water. In this work, a magnetic reduced graphene oxide (rGO)/Fe₃O₄/carbon nanotubes (CNTs) aerogel material was constructed by the electrostatic attraction between the negatively charged GO and positively charged CNTs following a one-pot water bath treatment. The as-synthesized aerogel demonstrated high compressive stress (28.4 kPa) and lower density (24.11 mg/cm³) with exceptional adsorption capacities for versatile adsorbates which are attributed to CNTs and magnetic Fe₃O₄ nanoparticles. The effect of pH, initial concentration of adsorbates (dyes, Cd (ІІ) ions, organic solvents, and pump oil), content of CNTs and cyclic times on the adsorption capacities of the aerogel were investigated in detail. Furthermore, from simulation, the adsorption kinetics, and thermodynamics of the aerogel for adsorbates were more satisfied by endothermic quasi-second-order kinetic model with characteristic physical adsorption. Thus, the optimized rGO/Fe₃O₄/CNTs-10 aerogel adsorbent can be used as a powerful and versatile tool to deal with contaminated industrial or domestic wastewater.

Sonocatalytic degradation of ciprofloxacin and organic pollutant by 1T/2H phase MoS2 in Polyvinylidene fluoride nanocomposite membrane

The development of recyclable catalysts with effective properties and stable reusability is great importance for the removal of different types of pollutants in wastewater. Herein, we have synthesized Polyvinylidene fluoride (PVDF) polymer and mixed-phase 1T/2H MoS₂ for immobilizing the sonocatalyst material. Techniques such as FESEM, XRD, FTIR, XPS, and UV-vis spectra have been used for analyzing the structural, and morphological properties. The formation of a 1T/2H mixed phase in MoS₂ has been revealed by XRD and XPS analysis. Consequently, the sonocatalytic performance of the nanocomposite membrane was investigated through ciprofloxacin (CIP) and organic pollutants (Rhodamine B (RhB)). As a result, MoS₂/PVDF (PM4) nanocomposite membrane exhibited a superior sonocatalytic activity with 94.37% and 84.37% of RhB and CIP degradation efficiency with pseudo-first-order kinetic constant (k) of 0.0187 min^-1, and 0.0044 min^-1. The sonocatalytic property of the nanocomposite membrane is related to 1T/2H mixed-phase and PVDF. Additionally, the metallic based 1T phase MoS₂ helps to promote electrons and holes and reduce the recombination rate. Moreover, it promotes the generation of more hydroxy radicals (^.OH), and superoxide radicals (∙O₂^-) play a significant role in sonocatalytic degradation of RhB pollutants. Thus, the improved sonocatalytic degradation of 1T/2H MoS₂/PVDF composite membrane exhibited its application in real-time wastewater treatment.

Shedding light on the performance of magnetically recoverable TiO2/Fe3O4/rGO-5 photocatalyst. Degradation of S-metolachlor as case study

Recalcitrant contaminants are not usually removed in conventional wastewater treatment plants. Therefore, they are transferred to the water resources that receive treated wastewaters and their presence can cause health and environmental issues. Herbicides are among these compounds. In particular, S-metolachlor (MTLC) is specifically of high concern because its molecule incorporates a chlorine atom that contributes to its toxicity. For its removal, a magnetically recoverable photocatalyst, TiO₂/Fe₃O₄/rGO-5, was synthesised following a hydrothermal method. The performance of TiO₂/Fe₃O₄/rGO-5 has been experimentally assessed and compared to TiO₂ and TiO₂/rGO-5 catalysts. A characterisation of the materials properties was carried out including adsorption isotherms of MTLC that provided the maximum adsorption capacity of the materials (q_m), being 140.85 ± 5.14 mg g^-1 for TiO₂/Fe₃O₄/rGO-5. Furthermore, the ternary composite exhibited good recoverability from liquid media after four consecutive cycles thanks to its magnetic character (magnetic saturation of 13.85 emu g^-1). Photocatalytic degradation of MTLC started after a dark adsorption step following first order kinetics (0.0197 ± 1.2 × 10^-4 min^-1 for the degradation of 100 mg L^-1 of MTLC with 0.5 g L^-1 of TiO₂/Fe₃O₄/rGO-5) similar to the rate of appearance of chloride in solution; after total removal of the solubilized MTLC the chloride concentration in the solution continued increasing with zero-th order kinetics up to the value corresponding to the total MTLC concentration. This second step in the chloride formation was attributed to the degradation of adsorbed MTLC. Specific experiments in the presence of scavengers of reactive oxygen species (ROS) were carried out shedding light on the degradation mechanisms. It was concluded the predominant role of free hydroxyl radicals in the photocatalytic degradation in all the investigated materials, whereas the presence of rGO in the composite photocatalysts improved their electronic conductivity, enhancing the activity of superoxide radicals. The results of this work provide important information for further development of photocatalysis.

Hollow Polyaniline Microsphere/MnO2/Fe3O4 Nanocomposites in Adsorptive Removal of Toxic Dyes from Contaminated Water

Dyes are considered as recalcitrant compounds and are not easily removed through conventional water treatment processes. The present study demonstrated the fabrication of polyaniline hollow microsphere (PNHM)/MnO₂/Fe₃O₄ composites by in situ deposition of MnO₂ and Fe₃O₄ nanoparticles on the surface of PNHM. The physicochemical characteristics and adsorption behavior of the prepared PNHM/MnO₂/Fe₃O₄ composites towards the removal of toxic methyl green (MG) and Congo red (CR) dyes have been investigated. The characterization study revealed the successful synthesis of the prepared PNHM/MnO₂/Fe₃O₄ adsorbent with a high Brunauer-Emmett-Teller (BET) surface area of 191.79 m²/g. The batch adsorption study showed about 88 and 98% adsorption efficiencies for MG and CR dyes, respectively, at an optimum dose of 1 g/L of PNHM/MnO₂/Fe₃O₄ at pH ∼6.75 at room temperature (303 ± 3 K). The adsorption phenomena of MG and CR dyes were well described by the Elovich and pseudo-second-order kinetics, respectively, and Freundlich isotherm model. The thermodynamics study shows that the adsorption reactions were endothermic and spontaneous in nature. The maximum adsorption capacity (Q_max) for MG and CR dyes was observed as 1142.13 and 599.49 mg/g, respectively. The responsible adsorption mechanisms involved in dye removal were electrostatic interaction, ion exchange, and the formation of the covalent bonds. The coexisting ion study revealed that the presence of phosphate co-ion considerably reduced the CR dye removal efficiency. However, the desorption-regeneration study demonstrated the successful reuse of the spent PNHM/MnO₂/Fe₃O₄ material for the adsorption of MG and CR dyes for several cycles. Given the aforementioned findings, the PNHM/MnO₂/Fe₃O₄ nanocomposites could be considered as a promising adsorbent for the remediation of dye-contaminated water.

Magnetic nanocomposites for sustainable water purification-a comprehensive review

Numerous contaminants in huge amounts are discharged to the environment from various anthropogenic activities. Waterbodies are one of the major receivers of these contaminants. The contaminated water can pose serious threats to humans and animals, by distrubing the ecosystem. In treating the contaminated water, adsorption processes have attained significant maturity due to lower cost, easy operation and environmental friendliness. The adsorption process uses various adsorbent materials and some of emerging adsorbent materials include carbon- and polymer-based magnetic nanocomposites. These hybrid magnetic nanocomposites have attained extensive applications in water treatment technologies due to their magnetic properties as well as combination of unique characteristics of organic and inorganic elements. Carbon- and polymer-related magnetic nanocomposites are more adapted materials for the removal of various kinds of contaminants from waterbodies. These nanocomposites can be produced via different approaches such as filling, pulse-laser irradiation, ball milling, and electro-spinning. This comprehensive review is compiled by reviewing published work of last the latest recent 3 years. The review article extensively focuses on different approaches for producing various carbon- and polymer-based magnetic nanocomposites, their merits and demerits and applications for sustainable water purification. More specifically, use of carbon- and polymer-based magnetic nanocomposites for removal of heavy metal ions and dyes is discussed in detail, critically analyzed and compared with other technologies. In addition, commercial viability in terms of regeneration of adsorbents is also reviewed. Furthermore, the future challenges and prospects in employing magnetic nanocomposites for contaminant removal from various water sources are presented.

Design of novel CNT/RGO/ZIF-8 ternary hybrid structure for lightweight and highly effective microwave absorption

Carbon-nanotube-based composites are highly desirable for addressing the difficulties relevant to the quality of electromagnetic wave absorbers. The introduction of lightweight nanocomposites for constructing new structures has been widely studied due to the transformation in impedance matching and attenuation. In this paper, a novel carbon nanotube-graphene oxide-zeolitic imidazolate framework-8 (CNT/RGO/ZIF-8) ternary hybrid structure was successfully fabricated by a facile solvothermal process. The ZIF-8 was entangled initially by carbon nanotubes via the π-π interaction between organic ligands and benzene ring structure in CNT. Then, the CNT/ZIF-8 composite was immobilized on the surface of RGO by interacting with the active functional group of RGO. The structure and performance for CNT, CNT/ZIF-8, and CNT/RGO/ZIF-8 were compared to investigate the interaction mechanisms between components, and CNT/ZIF-8 exhibited a distinct improvement for microwave absorption performance. Furthermore, the introduction of RGO can accelerate the amelioration of absorption characteristics. The interfacial bonding between CNT, RGO, and ZIF-8 exerts a great influence on the absorbing quality. The mechanism of absorption of electromagnetic waves was explained by the synergistic effects of conduction loss, polarization behaviors, and eddy current. The unique structure could offer new insights to exploit advanced microwave-absorption materials.

Alkali-cation-incorporated and functionalized iron oxide nanoparticles for methyl blue removal/decomposition

Enhancing the rate of decomposition or removal of organic dye by designing novel nanostructures is a subject of intensive research aimed at improving waste-water treatment in the textile and pharmaceutical industries. Despite radical progress in this challenging area using iron-based nanostructures, enhancing stability and dye adsorption performance is highly desirable. In the present manuscript alkali cations are incorporated into iron oxide nanoparticles (IONPs) to tailor their structural and magnetic properties and to magnify methyl blue (MB) removal/decomposition capability. The process automatically functionalizes the IONPs without any additional steps. The plausible mechanisms proposed for IONPs incubated in alkali chloride and hydroxide solutions are based on structural investigation and correlated with the removal/adsorption capabilities. The MB adsorption kinetics of the incubated IONPs is elucidated by the pseudo second-order reaction model. Not only are the functional groups of -OH and -Cl attached to the surface of the NPs, the present investigation also reveals that the presence of alkali cations significantly influences the MB adsorption kinetics and correlates with the cation content and atomic polarizability.

Magnetite nanoparticle decorated reduced graphene oxide for adsorptive removal of crystal violet and antifungal activities

This work reports the synthesis and application of magnetic rGO/Fe₃O₄ NCs using a pod extract of Dolichos lablab L. as areducing agent. GO was synthesized by a modified Hummers method, however GO was reduced using the plant extract to produce rGO. The as-synthesized rGO/Fe₃O₄ NCs were characterized by UV-vis spectrophotometer, Fourier transform infrared (FT-IR) spectroscopy, FT-Raman spectroscopy, X-ray diffraction (XRD), field emission scanning electron microscopy supported with energy dispersed X-ray spectroscopy (FESEM-EDX), transmission electron microscopy (TEM) and vibrating sample magnetometer (VSM). The synthesis of magnetic rGO/Fe₃O₄ NCs was confirmed from characterization results of FT-Raman, TEM and VSM. The FT-Raman results showed the D and G bands at 1306.92 cm⁻¹ and 1591 cm⁻¹ due to rGO and a peak at around 589 cm⁻¹ due to Fe₃O₄ NPs that were anchored on rGO sheets; TEM results showed the synthesis of Fe₃O₄ with an average particle size of 8.86 nm anchored on the surface of rGO sheets. The VSM result confirmed the superparamagnetic properties of the rGO/Fe₃O₄ NCs with a saturation magnetization of 42 emu g⁻¹. The adsorption capacity of rGO/Fe₃O₄ NCs towards crystal violet (CV) dye was calculated to be 62 mg g⁻¹. The dye removal behavior fitted well with the Freundlich isotherm and the pseudo-second-order kinetic model implies possible chemisorption. Besides, rGO/Fe₃O₄ NCs showed antifungal activities against Trichophyton mentagrophytes and Candida albicans by agar-well diffusion method with a zone inhibition of 24 mm and 21 mm, respectively. Therefore, rGO/Fe₃O₄ NCs can be used as an excellent adsorbent to remove organic dye pollutants and kill pathogens.

This work reports synthesis of magnetic rGO/Fe₃O₄ NCs using pod extract of Dolichos lablab L. as a reducing agent and its applications.