Preparation and Characterization of Insulin-Loaded Lipid-Based Microspheres Generated by Electrospray

Hydrophobic ion pairing as a novel approach to co-axial electrospraying of peptide-PLGA particles

Electrospraying is a processing technique that has gained much interest to prepare polymeric particles. The technique operates at ambient temperature, thereby avoiding heat induced degradation of labile therapeutics (e.g. peptides and proteins). Exposure to organic solvents can be minimised by co-axial electrospraying through separation of core (aqueous) and shell (organic) solvents. However, aqueous solutions are often difficult to electrospray due to high surface tension. Immiscibility between the core-shell solvents creates a further process challenge. Herein, we describe for the first time the use of hydrophobic ion pairing (HIP) to encapsulate a polypeptide into polymeric particles prepared by co-axial electrospraying. Peptide ion pairs were prepared to incorporate a model peptide - teriparatide - into an organic solvent, permitting facile electrospraying while also protecting the peptide from denaturation. Teriparatide loaded PLGA particles were generated by electrospraying from aqueous or ethanolic peptide solutions (core). A PLGA solution in chloroform (with and without co-solvents) was employed as the shell solution. The aqueous core solution led to a teriparatide encapsulation efficiency of 79.2 ± 19.8 %, which was not significantly different from the ethanolic core (57.1 ± 14.5 %). When aqueous solutions were used the process lacked reproducibility, resulting in low process yields (61.3 ± 4.0 %). In contrast, when an organic core was used a dry powder bed was achieved with a yield of 102.2 ± 8.8 %. The peptide's integrity and biological functionality were retained after electrospraying as ion pairs, as evidenced in a cell-based PTH1R receptor binding assay.

Interplay of Drug-Polymer Interactions and Release Performance for HPMCAS-Based Amorphous Solid Dispersions

The interplay between drug and polymer chemistry and its impact on drug release from an amorphous solid dispersion (ASD) is a relatively underexplored area. Herein, the release rates of several drugs of diverse chemistry from hydroxypropyl methylcellulose acetate succinate (HPMCAS)-based ASDs were explored using surface area normalized dissolution. The tendency of the drug to form an insoluble complex with HPMCAS was determined through coprecipitation experiments. The role of pH and the extent of drug ionization were probed to evaluate the role of electrostatic interactions in complex formation. Relationships between the extent of complexation and the drug release rate from an ASD were observed, whereby the drugs could be divided into two groups. Drugs with a low extent of insoluble complex formation with HPMCAS tended to be neutral or anionic and showed reasonable release at pH 6.8 even at higher drug loadings. Cationic drugs formed insoluble complexes with HPMCAS and showed poor release when formulated as an ASD. Thus, and somewhat counterintuitively, a weakly basic drug showed a reduced release rate from an ASD at a bulk solution pH where it was ionized, relative to when unionized. The opposite trend was observed in the absence of polymer for the neat amorphous drug. In conclusion, electrostatic interactions between HPMCAS and lipophilic cationic drugs led to insoluble complex formation, which in turn resulted in ASDs with poor release performance.

Solid Lipid Nanoparticles (SLNs): An Advanced Drug Delivery System Targeting Brain through BBB

The blood-brain barrier (BBB) plays a vital role in the protection and maintenance of homeostasis in the brain. In this way, it is an interesting target as an interface for various types of drug delivery, specifically in the context of the treatment of several neuropathological conditions where the therapeutic agents cannot cross the BBB. Drug toxicity and on-target specificity are among some of the limitations associated with current neurotherapeutics. In recent years, advances in nanodrug delivery have enabled the carrier system containing the active therapeutic drug to target the signaling pathways and pathophysiology that are closely linked to central nervous system (CNS) disorders such as Alzheimer's disease (AD), Parkinson's disease (PD), Huntington's disease (HD), multiple sclerosis (MS), brain tumor, epilepsy, ischemic stroke, and neurodegeneration. At present, among the nano formulations, solid lipid nanoparticles (SLNs) have emerged as a putative drug carrier system that can deliver the active therapeutics (drug-loaded SLNs) across the BBB at the target site of the brain, offering a novel approach with controlled drug delivery, longer circulation time, target specificity, and higher efficacy, and more importantly, reducing toxicity in a biomimetic way. This paper highlights the synthesis and application of SLNs as a novel nontoxic formulation strategy to carry CNS drugs across the BBB to improve the use of therapeutics agents in treating major neurological disorders in future clinics.

Highly-loaded protein nanocarriers prepared by Flash NanoPrecipitation with hydrophobic ion pairing

The efficient encapsulation of therapeutic proteins into delivery vehicles, particularly without loss of function, remains a significant research hurdle. Typical liposomal formulations achieve drug loadings on the order of 3-5% and encapsulation efficiencies around 50%. We demonstrate the encapsulation of model proteins with isoelectric points above and below pH 7 into nanocarriers (NCs) with protein loadings as high as 46% and encapsulation efficiencies above 95%. This is done by combining the continuous nanofabrication process Flash NanoPrecipitation (FNP) with the technique of hydrophobic ion pairing by forming and encapsulating an ionic complex within a nanocarrier stabilized by a block copolymer surface layer. We complex and encapsulate lysozyme with two anionic hydrophobic counterions, sodium oleate and sodium dodecyl sulfate, using either a pre-formed complex or in situ pairing. The strategy successfully forms NCs ~150 nm in diameter and achieves encapsulation efficiencies over 95%. Protein release rate from the NCs in physiological conditions and the bioactivity of released lysozyme are measured, and both are found to vary with the complexing counterion and the protein/counterion ratio used during formulation. Protein release on the time scale of weeks is observed, and up to 100% bioactivity is measured from released lysozyme. 16 quaternary ammonium cationic counterions are tested to encapsulate ovalbumin in 32 formulations. Of these, 19 successfully form ~150 nm NCs with loadings up to 29% and encapsulation efficiencies up to 88%. We divide the formulations into four regimes and identify chemical factors responsible for the success or failure of a given counterion to formulate NCs with the desirable size, loading, and encapsulation efficiency. A successful ovalbumin NC formulation was then tested in vivo in a mouse nasal vaccine model and found to induce a higher titer of OVA-specific IgG than unencapsulated ovalbumin. Taken together, these findings suggest that Flash NanoPrecipitation with hydrophobic ion pairing is an attractive platform for encapsulating high molecular weight proteins into NCs. In particular, the ability to tune protein release rate by varying the counterion or protein/counterion ratio used during formulation is a useful feature.

Fabrication of Polymeric Microparticles by Electrospray: The Impact of Experimental Parameters

Microparticles (MPs) with controlled morphologies and sizes have been investigated by several researchers due to their importance in pharmaceutical, ceramic, cosmetic, and food industries to just name a few. In particular, the electrospray (ES) technique has been shown to be a viable alternative for the development of single particles with different dimensions, multiple layers, and varied morphologies. In order to adjust these properties, it is necessary to optimize different experimental parameters, such as polymer solvent, voltage, flow rate (FR), type of collectors, and distance between the collector and needle tip, which will all be highlighted in this review. Moreover, the influence and contributions of each of these parameters on the design and fabrication of polymeric MPs are described. In addition, the most common configurations of ES systems for this purpose are discussed, for instance, the main configuration of an ES system with monoaxial, coaxial, triaxial, and multi-capillary delivery. Finally, the main types of collectors employed, types of synthesized MPs and their applications specifically in the pharmaceutical and biomedical fields will be emphasized. To date, ES is a promising and versatile technology with numerous excellent applications in the pharmaceutical and biomaterials field and such MPs generated should be employed for the improved treatment of cancer, healing of bone, and other persistent medical problems.

Hydrophobic ion pairing: encapsulating small molecules, peptides, and proteins into nanocarriers

Hydrophobic ion pairing has emerged as a method to modulate the solubility of charged hydrophilic molecules ranging in class from small molecules to large enzymes. Charged hydrophilic molecules are ionically paired with oppositely-charged molecules that include hydrophobic moieties; the resulting uncharged complex is water-insoluble and will precipitate in aqueous media. Here we review one of the most prominent applications of hydrophobic ion pairing: efficient encapsulation of charged hydrophilic molecules into nano-scale delivery vehicles - nanoparticles or nanocarriers. Hydrophobic complexes are formed and then encapsulated using techniques developed for poorly-water-soluble therapeutics. With this approach, researchers have reported encapsulation efficiencies up to 100% and drug loadings up to 30%. This review covers the fundamentals of hydrophobic ion pairing, including nomenclature, drug eligibility for the technique, commonly-used counterions, and drug release of encapsulated ion paired complexes. We then focus on nanoformulation techniques used in concert with hydrophobic ion pairing and note strengths and weaknesses specific to each. The penultimate section bridges hydrophobic ion pairing with the related fields of polyelectrolyte coacervation and polyelectrolyte-surfactant complexation. We then discuss the state of the art and anticipated future challenges. The review ends with comprehensive tables of reported hydrophobic ion pairing and encapsulation from the literature.

Strategies for regeneration of components of nervous system: scaffolds, cells and biomolecules

Nerve diseases including acute injury such as peripheral nerve injury (PNI), spinal cord injury (SCI) and traumatic brain injury (TBI), and chronic disease like neurodegeneration disease can cause various function disorders of nervous system, such as those relating to memory and voluntary movement. These nerve diseases produce great burden for individual families and the society, for which a lot of efforts have been made. Axonal pathways represent a unidirectional and aligned architecture allowing systematic axonal development within the tissue. Following a traumatic injury, the intricate architecture suffers disruption leading to inhibition of growth and loss of guidance. Due to limited capacity of the body to regenerate axonal pathways, it is desirable to have biomimetic approach that has the capacity to graft a bridge across the lesion while providing optimal mechanical and biochemical cues for tissue regeneration. And for central nervous system injury, one more extra precondition is compulsory: creating a less inhibitory surrounding for axonal growth. Electrospinning is a cost-effective and straightforward technique to fabricate extracellular matrix (ECM)-like nanofibrous structures, with various fibrous forms such as random fibers, aligned fibers, 3D fibrous scaffold and core-shell fibers from a variety of polymers. The diversity and versatility of electrospinning technique, together with functionalizing cues such as neurotrophins, ECM-based proteins and conductive polymers, have gained considerable success for the nerve tissue applications. We are convinced that in the future the stem cell therapy with the support of functionalized electrospun nerve scaffolds could be a promising therapy to cure nerve diseases.

Lipid nanoparticles: state of the art, new preparation methods and challenges in drug delivery

INTRODUCTION

Nanoparticles are rapidly developing as drug carriers because of their size-dependent properties. Lipid nanoparticles (LNPs) are widely employed in drug delivery because of the biocompatibility of the lipid matrix.

AREAS COVERED

Many different types of LNPs have been engineered in the last 20 years, the most important being solid lipid nanoparticles (SLNs), nanostrucured lipid carriers (NLCs), lipid-drug conjugates (LDCs) and lipid nanocapsules (LNCs). This review gives an overview of LNPs, including their physico-chemical properties and pharmacological uses. Moreover, it highlights the most important innovations in the preparation techniques of LNPs, aimed to encapsulate different molecules within the lipid matrix. Finally, it gives a short perspective on the challenges of drug delivery, which are a potential field of application for LNPs: cancer therapy, overcoming the blood-brain barrier and gene and protein delivery.

EXPERT OPINION

LNPs are a safe and versatile vehicles for drug and active delivery, suitable for different administration routes. New technologies have been developed for LNP preparation and studies are currently underway in order to obtain the encapsulation of different drugs and to deliver the active molecule to the site of action.