Preparation and characterization of W/O/W type double emulsion containing PGPR–lecithin mixture as lipophilic surfactant

In-situ enzyme-initiated production of hexanal from sunflower oil and its release from double emulsion electrospun bio-active membranes

The aim of the presented study was to evaluate the release of the enzymatically initiated production of hexanal from double emulsion electrospun bio-active membranes at a temperature of fruit storage. Among different formulations of water-in-oil (W1/O) primary emulsions, the emulsion composed of 12% w/v Tween20 and 0.1 M NaCl in water (W1) and 6% of poly(glycerol) poly(ricinoleate) dissolved in sunflower oil (O) using W1/O ratio of 80/20 (w/w) (Tween20-NaCl/6% PGPR) was selected, for further incorporation of enzymes, based on the lowest average droplet size (391.0 ± 15.6 nm), low polydispersity index (0.255 ± 0.07), and good gravitational stability also after 14 days. Both enzymes, lipase and lipoxygenase are needed to produce hexanal (up to 58 mg/L). Additionally, double emulsions were prepared with sufficient conductivity and viscosity using different W1/O to W2 ratios for electrospinning. From the selected electrospun membrane, up to 4.5 mg/L of hexanal was released even after 92 days.

Stabilization of Oil-in-Water Pickering Emulsions by Surface-Functionalized Cellulose Hydrogel

An amphiphilic cellulose (CLH) hydrogel was synthesized via grafting of quaternary ammonium groups onto cellulose. The structural properties of CLH were characterized via Fourier transform infrared (FTIR)/13C solid-state NMR spectroscopy, elemental (CHN) analysis, particle size distribution (PSD), thermogravimetric analysis (TGA), and wettability was assessed through contact angle measurements. Pickering emulsions of apolar oils in water were prepared using variable weights of the CLH hydrogel as the stabilizing agent, along with different methods of agitation (mechanical shaking and sonication). The characterization results for CLH provide support for the successful grafting of quaternary ammonium groups onto cellulose to produce hydrogels. Different methods of agitation of an oil/water mixture revealed the formation of an oil-in-water (O/W) Pickering emulsion that was stable to coalescence for over 14 days. The resulting emulsions showed variable droplet sizes and stability according to the dosage of CLH in the emulsion and the agitation method, where the emulsion droplet size is related to the particle size of CLH. The addition of methyl orange (MO), a probe to evaluate the phase partitioning of the dye, had minor effects on the emulsion droplet size, and the emulsion prepared with 0.8 wt.% of CLH and agitated via sonication exhibited the smallest droplet size and greatest stability. This study is anticipated to catalyze further research and the development of low-cost and sustainable biopolymer hydrogels as stabilizers for tunable Pickering emulsion. Grafted cellulose materials of this type represent versatile stabilizing agents for foods, agrochemicals, and pharmaceutical products and technologies.

Polyglycerol polyricinoleate and lecithin stabilized water in oil nanoemulsions for sugaring Beijing roast duck: Preparation, stability mechanisms and color improvement

Traditional Beijing roast duck often suffers from uneven color and high sugar content after roasting. Water-in-oil (W/O) nanoemulsion is a promising alternative to replace high concentration of sugar solution used in sugaring process according to similarity-intermiscibility theory. Herein, 3% of xylose was embedded in the aqueous phase of W/O emulsion to replace 15% maltose solution. W/O emulsions with different ratios of lecithin (LEC) and polyglycerol polyricinoleate (PGPR) were constructed by high-speed homogenization and high-pressure homogenization. Distribution and penetration extent of solutions and emulsions through the duck skin, as well as the color uniformity of Beijing roast duck were analyzed. Emulsions with LEC:PGPR ratios of 1:3 and 2:2 had better stability. Stable interfacial film and spatial structure were important factors influencing emulsion stabilization. The stable W/O emulsions could more uniformly distribute onto the surface of duck skin and longitudinally penetrate through the skin than solutions.

Preparation of PCL/lecithin/bacteriocin CAMT6 antimicrobial and antioxidant nanofiber films using emulsion electrospinning: Characteristics and application in chilled salmon preservation

Multi-functional packaging materials are an important development for food preservation. Emulsion electrospinning is a novel and simple method that can be used to prepare multi-functional packaging materials, which can effectively protect the loaded active substances during the preparation process. In this study, PCL/lecithin/bacteriocin CAMT6 nanofiber films with antimicrobial and antioxidant activity were prepared by emulsion electrostatic spinning. The morphology and homogeneity of the prepared nanofibrous membranes could be improved by optimising the formulation of the emulsion for electrospinning. Analytical testing of the prepared nanofiber films revealed that the nanofibers had a core-shell structure, with bacteriocin CAMT6 effectively encapsulated in the core layer and the PCL and phospholipids homogeneously mixed to form the shell layer. Additionally, the nanofiber films had acceptable tensile properties and water absorption capacity. In chilled salmon meat, the nanofiber film effectively inhibited the growth of bacteria, slowed the oxidation of oil and slowed water loss, which was a good protective effect. This study provides a reference for the encapsulation application of food-active packaging materials and bacteriocins.

Optimization of Multiple W1/O/W2 Emulsions Processing for Suitable Stability and Encapsulation Efficiency

Double emulsions are a type of multiple emulsions, which can be defined as a multicompartmentalized system where the droplets are dispersed into the continuous phase containing other emulsions. Although double food-grade emulsions have been manufactured, there is a lack of scientific background related to the influence of different processing conditions. This work analyses the influence of processing variables in (W₁/O/W₂) double emulsions: passes through the valve homogenizer, pressure applied, lipophilic emulsifier concentration, the ratio between the continuous phase (W₂) and the primary emulsion (W₁/O), and the incorporation of xanthan gum (XG) as a stabilizer. The results obtained show that these emulsions can be obtained after selecting suitable processing conditions, making them easily scalable in industrial processes. In terms of droplet size distribution, the input of higher energy to the system (20 MPa) during emulsification processing led to emulsions with smaller droplet sizes (D_3,2). However, more monodispersed emulsions were achieved when the lowest pressure (5 MPa) was used. As for the number of passes, the optimal (emulsions more monodispersed and smaller droplet sizes) was found around 2–3 passes, regardless of the valve homogenizer pressure. However, emulsions processed at 20 MPa involved lower encapsulation efficiency (E_E) than emulsions processed at 5 MPa (87.3 ± 2.3 vs. 96.1 ± 1.8, respectively). The addition of XG led to more structured emulsions, and consequently, their kinetic stability increased. The results obtained indicated that a correct formulation of these W₁/O/W₂ double emulsions allowed the optimal encapsulation of both hydrophilic and lipophilic bioactive compounds. Thus, the development of food matrices, in the form of multiple emulsions, would allow the encapsulation of bioactive compounds, which would result in the development of novelty food products.

Microencapsulated soil conditioner with a water-soluble core: improving soil nutrition of crop root

Traditional level of fertilisers was used by most farmers in China with the risks about resources wasting, environmental pollution together with soil structure deterioration. It is practicable to tackle the challenges about over-fertilisation and low efficiency with microencapsulated soil conditioner (MSC), which clads the water soluble core with natural polymer. Fulvic acid (FA) can be used as core material, because it possesses the characteristics of water-soluble, fertiliser maintenance and expedient monitoring. The morphology, structure, and properties of MSC were studied and compared. The particle size of MSC was ranged from 1.58 to 2.14 mm with a similar shape which was obtained by conventional measuring method due to their soft features. This was mainly attributed to the concentration of liquid paraffin and the interaction between shell materials and calcium chloride_. FTIR spectra showed that a peak appeared at 1372 cm^-1, and this was ascribed to the microcapsules crosslinked and solidified by calcium ions. Sustained release experiment revealed that the microcapsules owned better fertiliser-retaining and water-retaining performances, and FA may be released as long as 750 h. Biodegradation experiments revealed that an obvious pore structure was found on the surface of microspheres after 30 d of degradation, and this was consistent with the sustained release experiment. Pot experiment illustrated that the plants cured with the microcapsules showed significant growth trend and grew up to 9.2 cm with a maximum rate, and this revealed that MSC owned better performance of promoting the growth of crop root.

Development and Characterization of Gelled Double Emulsions Based on Chia (Salvia hispanica L.) Mucilage Mixed with Different Biopolymers and Loaded with Green Tea Extract (Camellia sinensis)

The aim of this research was to develop and characterize five gelled double emulsions based on chia mucilage (CM) and different biopolymers (κ-carrageenan, C; locust bean gum, L; thixogum, T; and whey protein concentrate, W) loaded with green tea extract (GTE). Gelled double emulsions consisted of W₁ (whey-protein-concentrate/sodium-azide/NaCl/GTE)/O and (PGPR/canola-oi)/W₂ (CM, CMC, CML, CMT and CMW), and were characterized based on physicochemical properties during 35 days of storage. Optical microscopy clearly showed the drops of the internal phase surrounded by droplets of oil dispersed in the second aqueous phase; the droplet size was higher for CMT and lowest for CMW. In addition, all emulsions were highly stable at creaming and were effective in reducing the loss of antioxidant activity (88.82%) and total phenols (64.26%) during storage; CMT, CML and CM were the most effective. Furthermore, all emulsions showed a protective effect by modulating the release of the GTE in a simulated gastrointestinal environment, allowing a controlled release during the gastric-intestinal digestion phases and reaching its maximum release in the intestinal phase (64.57–83.31%). Thus, gelled double emulsions are an alternative for the preservation of GTE and could be a potential alternative for their application in the development of functional foods.

Characterization of Emulsion Stabilization Properties of Gum Tragacanth, Xanthan Gum and Sucrose Monopalmitate: A Comparative Study

Emulsification effect of gum tragacanth (GT) obtained from Astragalus species is gaining particular interest in recent years. In this study, stabilization effect of GT, xanthan gum (XG), and sucrose monopalmitate (SMP) was investigated by keeping their concentration constant (0.5% w/v) for the oil-in-water emulsions containing 20% (v/v) sun flower oil and 2% (w/v) whey protein isolate. Emulsification was achieved by using high shear homogenization. Particle size and T₂ (spin-spin relaxation time) measurements were performed for the characterization and repeated over the course of 28 days. Emulsion stability index (ESI [%]) was measured and rheological characterization was also performed. The lowest particle size was found for the XG emulsions and this was attributed to the pseudoplastic behavior of xanthan compared to GT (n_Xanthan = 0.188 ≪ n_GT = 0.721). Xanthan emulsions thinned out dramatically when sheared during homogenization, and consequently, floccules formed could have been disrupted more resulting in smaller particle size. Result of rheological experiments showed that SMP emulsions were fit to Newtonian model, while XG and GT showed shear thinning behavior and fit to a power law model. Apparent viscosity of XG emulsions was found significantly higher than the GT ones. The most stable emulsions were the ones prepared by XG and they remained stable during 28 days. Although GT emulsions could not protect their stability during 28 days, ESI (%) results were found similar with XG indicating promising emulsification effect of GT. PRACTICAL APPLICATION: Gum tragacanth, xanthan gum, and sucrose monopalmitate have been used to formulate oil-in-water emulsions. The final formulated products can be used in emulsion-based food products to increase their stability and shelf life.

Ultrasound-assisted water-in-palm oil nano-emulsion: Influence of polyglycerol polyricinoleate and NaCl on its stability

This study aimed to formulate a stable palm oil-based water-in-oil (W/O) nano-emulsion. Emphasis was placed on the effects of polyglycerol polyricinoleate (PGPR), medium chain triglyceride (MCT), lecithin and sodium chloride (NaCl) addition towards the stability of nano-emulsion. Among the performed analyses were mean droplet diameter (MDD), dispersity index (DI), critical micelle concentration (CMC), lipid peroxidation, viscosity, sedimentation index (SI) and surface morphology. The most stable optimized palm oil-based W/O nano-emulsion was produced using 61.25 wt% of palm oil, 26.25 wt% of MCT, 2.5 wt% of PGPR and 10 wt% of water (0.5 M of NaCl). The MDD and DI of the obtained W/O nano-emulsion were 143.1 ± 8.8 and 0.131 ± 0.094, respectively. After 2 weeks, no sedimentation was observed in W/O nano-emulsion with MDD and DI were 151.2 ± 6.5 nm and 0.156 ± 0.025 respectively. This study clearly found that polyricinoleate non-polar fatty acids of PGPR bound to non-polar fatty acids of palm oil through van der Waals intermolecular forces. While, polyglycerol polar head of PGPR interacts with water molecules through hydrogen bonding, as well as by the bound glyceride units of palm oil. The addition of NaCl further reduced MDD by 70 nm and improved the stability of nano-emulsion through electrostatic and steric repulsions attributed to the dissociation of Na⁺ and Cl^- ions. This study aids to widen the knowledge and interest on the utilization of palm oil for the generation of W/O nano-emulsion, as well as to better understand the interaction between palm oil and PGPR/NaCl in producing nano-emulsion.