Migration studies from paper and board food packaging materials. 1. Compositional analysis

Elemental Composition of Commercially Available Cannabis Rolling Papers

With the recent legalization of cannabis in multiple jurisdictions and widespread use as a medical treatment, there has been an increased focus on product safety and the potential impacts of contaminants on human health. One factor that has received little attention is the possible exposure to potentially hazardous levels of toxic elements from rolling (smoking) papers. The elemental composition of rolling papers is largely unregulated, with a minority of jurisdictions regulating papers only when they are part of a final cannabis product. This study reports the concentrations of 26 elements in commercially available rolling papers and estimates potential maximum exposures relative to USP232 and ICH Q3D dosages in pharmaceutical compounds. Exposure estimates indicate that the concentrations of several elements in some products, particularly Cu, Cr, and V, may present a potential hazard to frequent users. Several elements, including Ag, Ca, Ba, Cu, Ti, Cr, Sb, and possibly others, are likely present in elevated quantities in some papers due to product design and manufacturing processes. Our results further suggest that Cu-based pigments are used by a number of manufacturers and that regular use of these products might result in exposures as high as 4.5-11 times the maximum exposure limits. Further research to quantify the contribution of rolling papers to elemental exposure under realistic smoking conditions is warranted.

Estimated daily intake of epichlorohydrin and certain heavy metals of bagged and loose black teas

This study aimed to determine the levels of epichlorohydrin (ECH) and some metals in 3 brands of bagged and loose black teas which are widely marketed in Alexandria markets, Egypt, and estimate the acceptable daily intake as a safety indicator. Gas chromatography-mass spectrometry results revealed that ECH levels significantly differed between the tested brands steeped for 2 min and tea bags contained higher levels than in loose teas and the levels increased by increasing the steep time. These levels of ECH in all the tested brands either in tea bags or loose teas were higher than the guideline value of 0.10 μg/L. Also, the results illustrated that the adding of sucrose or washing of bags with deionized water for 1 min significantly decreased the levels of ECH. In addition, inductively coupled plasma optic emission spectrometry (ICP-OES) results illustrated that the levels of Al, Pb, and Cd were too low in infusions compared to the established guidelines. Because of the high consumption of tea in Alexanria city, Egypt, it is necessary to determine the contribution of tea to the daily dietary intake of ECH, Al, Pb and Cd. In case of the bagged teas, the calculated daily intake of ECH was on average about 55.37 times greater than that in loose teas. The consumption of both bagged and loose teas infusion could not pose a risk for population as the health hazard index was < 1. It can be concluded that consumers who prefer to use tea bags should rinse these bags before preparing the tea brewer, and do not increase the steeping time to more than 2 min.

Estimation of some heavy metals contamination in waste newspapers

Heavy metals in waste newspapers produce varying degrees of contamination concerns during food consumption, and when heavy metals levels exceed the permissible level, they become harmful to human. Different types of waste newspapers were analyzed for As, Cd, Cr, Ni, Pb, Al, and Zn by ICP-OES. The digestion solution included 10 ml of 69% nitric acid and 2 ml of 30% hydrogen peroxide. Based on the results for light fonts, the average content of As, Cd, Cr, Ni, and Pb was 2.8, 1.5, 6.9, 5.6, and 5.0 µg/l, while was 3.4 and 0.18 mg/l for Al, and Zn, respectively. In bold fonts, the content of As, Cd, Cr, Ni, and Pb was 4.9, 2.4, 9.1, 7.9, and 7.0 µg/l, respectively, while Al and Zn were 5.7 mg/l and 0.32 mg/l, respectively. In the pictures, the levels of As, Cd, Cr, Ni, and Pb were 6.1, 2.99, 11.2, 9.4, and 8.99 µg/l, while Al and Zn were 8.2 and 0.39 mg/l, respectively. The results showed that all levels of heavy metals under study were within the specialized global councils' permitted limits.

Printing ink related chemicals, including synthetic phenolic antioxidants, organophosphite antioxidants, and photoinitiators, in printing paper products and implications for human exposure

Although synthetic antioxidants (AOs) and photoinitiators (PIs) are known to be used in printing inks, there are little data on residual concentrations in printing paper products. In the present study, twenty-five PIs, ten AOs, and six transformation products were analyzed in two types of printing paper products, magazines and paperboard food packaging materials, both of which are unavoidable everyday products in our life. Nine AOs and six transformation products can be detected in food packaging materials with total concentrations (geometric mean, GM) of 1.16 × 10⁴ ng/dm². Twenty-two PIs were detected in food packaging materials with total concentrations (GM) of 1.76 × 10⁴ ng/dm². These chemicals were also detected in magazines, albeit at low concentrations (GM of AOs: 466 ng/dm², GM of PIs: 1.17 × 10³ ng/dm²). Magazine front covers were found to have much higher concentrations of the target compounds than magazine inside pages. Tris(2,4-di-tert-butylphenyl) phosphate (AO168O), 2,6-di-tert-butyl-4-methylphenol (BHT), bisphenol A (BPA), and benzophenone (BP) were among the predominant chemicals in those printing paper products. Preliminary calculations suggest that dermal exposure to AOs (GM: 6.25 ng/day) and PIs (GM: 17.0 ng/day) via contact with printing paper products is a minor exposure pathway compared to food intake/dust ingestion and is exceedingly unlikely to cause adverse health effects.

Dietary Exposure Estimation to Chemicals Transferred from Milk and Dairy Products Packaging Materials in Spanish Child and Adolescent Population

Packaging materials are subject to risk assessment since they can transfer their components to the food, and they may constitute a risk for the consumers' health. Therefore, estimating the exposure to chemicals migrating from packaging is required. In this study, a novel approach based on a total diet study (TDS)-like investigation to evaluate the exposure to chemicals transferred from the packaging was presented. The proposed methodology involved a non-targeted gas chromatography coupled to mass spectrometry (GC-MS) method to identify potential migrants and the determination of the migrants in composite food samples. The method was applied to evaluate the dietary exposure to chemicals from food packaging materials used for milk and dairy products in the Spanish child and adolescent populations. Several migrants identified in packaging materials were selected to determine their concentration in composite food samples. These chemicals included diethyl phthalate (DEP), diisobutyl phthalate (DIBP), dibutyl phthalate (DBP), bis(2ethylhexyl) phthalate (DEHP), benzophenone (BP), 1,3-diphenylpropane (1,3-DPP), and bis(2-ethylhexyl) terephthalate (DEHT). The method exhibited a good sensitivity (limit of detection, LOD ≤ 0.05 µg/g) and a satisfactory recovery (78.4-124%). Finally, the exposure was estimated using the Spanish national dietary survey ENALIA. Phthalates DBP and DEHP showed the highest mean exposure, ranging from 2.42 (10-17 years)-4.40 (12-35 months) and 1.35 (10-17 years)-4.07 (12-35 months) µg/kg bw/day for DBP and DEHP, respectively.

Investigation on mercury migration discipline in different paper-plastic food packaging containers

The understanding of the migration of mercury from packaging materials to food stuffs is the prerequisite for the development of food safety regulations. In this article, the migration of mercury from food paper-plastic packaging containers to four food stimulants under different migrated temperatures is studied. The results show that the mobility and the maximum migration volume of mercury increase at certain temperatures when the migration time is extended. It is also noted that the time to reach equilibrium is reduced as the temperature increases. Meanwhile, different solvents appear various different while the rates of migration are 3% acetic acid >10% ethanol >20% ethanol >50% ethanol. But they show the same trend at the different temperatures. Our data suggest that different solvents, temperatures, and food stimulants affect the migration rates, and ameliorate those conditions will reduce migration and promote food quality.

Characterization of natural polymers as functional barriers for cellulose-based packaging materials

Cellulose-based packaging materials are currently the most commonly used food packaging materials due to their light weight, stability and affordable price. However, the use of recycled paper and board adds to the risk that undesirable substances migrate into the packed goods, since contaminants are not completely removed during the recycling process and can accumulate in the final product. The only available fast and practical solution that can be used to reduce the migration of these substances is the application of functional barriers in the packaging. The applied barriers are currently mostly synthetic, which either serve only a moderate barrier function and/or have the disadvantage that it is often more complex and expensive to recycle the resulting packaging material. The aim of this project is to evaluate different bio-based or biodegradable polymers with regards to their barrier properties. Due to the fact that the transport phenomena are mainly driven by (gas phase) migration, methods based on gas chromatography (GC), including GC coupled with mass spectrometry (GC-MS) and flame ionization detection (GC-FID), GC-FID coupled online with high pressure liquid chromatography (HPLC-GC-FID), and comprehensive GCxGC-MS were used to qualify and quantify the migrated substances. This use of a wide range of different methods and instruments yielded excellent results, allowing us to comprehensively characterize the biopolymers and their barrier function.

Waste paper for recycling: Overview and identification of potentially critical substances

Paper product manufacturing involves a variety of chemicals used either directly in paper and pulp production or in the conversion processes (i.e. printing, gluing) that follow. Due to economic and environmental initiatives, paper recycling rates continue to rise. In Europe, recycling has increased by nearly 20% within the last decade or so, reaching a level of almost 72% in 2012. With increasing recycling rates, lower quality paper fractions may be included. This may potentially lead to accumulation or un-intended spreading of chemical substances contained in paper, e.g. by introducing chemicals contained in waste paper into the recycling loop. This study provides an overview of chemicals potentially present in paper and applies a sequential hazard screening procedure based on the intrinsic hazard, physical-chemical and biodegradability characteristics of the substances. Based on the results, 51 substances were identified as potentially critical (selected mineral oils, phthalates, phenols, parabens, as well as other groups of chemicals) in relation to paper recycling. It is recommended that these substances receive more attention in waste paper.

Development of miniaturized hollow-fiber assisted liquid-phase microextraction with in situ acyl derivatization followed by GC-MS for the determination of benzophenones in human urine samples

A simple and highly sensitive method that involves miniaturized hollow fiber assisted liquid-phase microextraction (HF-LPME) with in situ acyl derivatization and GC-MS was developed for the determination of benzophenone (BP) and related compounds in human urine samples. The limits of detection (S/N = 3) and quantification (S/N > 10) of BPs in human urine samples are 0.01 to 0.05 and 0.05 to 0.2 ng ml(-1), respectively. The average recoveries of BPs (n = 5) in human urine samples spiked with 10 and 50 ng ml(-1) BPs are 93.1 to 106.7% (RSD: 1.5 to 8.4%) and 96.3 to 101.5% (RSD: 3.0 to 7.7%), respectively. When the proposed method was applied to human urine samples, BPs were detected at the sub ng ml(-1) level.

Migration of organic compounds from a multilayer plastic–paper material intended for food packaging

This paper deals with the study of the kinetic migration of a series of organic compounds representative of potential contaminants in packaging materials and used as surrogates (o-xylene, acetophenone, dodecane, naphthalene, 2,3,4-trichloroanisole, benzophenone, isomeric mix of diisopropylnaphthalene, diisobutyl phthalate and methyl stearate). Migration to one side of a solid simulant, Tenax, also referred to as MPPO (modified polyphenylene oxide), was investigated in this study. One spiked sample of multilayer material was used to optimise the extraction procedures for the multilayer paper-based material and the Tenax as well as to perform kinetic migration studies. Three sequential extractions using ethanol were necessary for the strips of the multilayer material but only one extraction was necessary for the solid simulant to obtain >70% recovery of the surrogates. These results enabled us to specify the extraction requirements of the multilayer sample and the solid simulant and as well as those of the migration tests at high temperature using Tenax as solid simulant. The matrix effect associated with the extraction of the contaminants from the multilayer sample is also discussed.

Oestrogenicity of paper and cardboard extracts used as food containers

Bisphenol-A (BPA), dibutyl phthalate (DBP), and di-2-ethylhexyl phthalate (DEHP), which are common chemical residues in food-packaging materials, were investigated in paper and cardboard containers used for take-away food. The oestrogenicity of aqueous extracts was tested in E-Screen bioassay and analysis carried out by high-performance liquid chromatography (HPLC) and gas chromatography-mass spectrometry (GC/MS). Oestrogenicity was demonstrated in 90% of extracts (geometric mean [GM] = 11.97 pM oestradiol equivalents g(-1)). DEHP, DBP, and BPA (GM = 341.74, 37.59, and 2.38 ng g(-1) of material) were present in 77.50, 67.50, and 47.50% of samples, respectively. In bivariate analyses, no significant association was found between the levels of these chemicals and oestrogenicity in cardboard/paper extracts. A close-to-significant association was found between oestrogenicity and DBP (beta = 1.25; p = 0.06) in paper extracts, which reached statistical significance in multivariate analysis (beta = 1.61; p = 0.03). Paper and cardboard used in food packaging may contribute to the inadvertent exposure of consumers to endocrine-disrupting chemicals.

Determination of partition behavior of organic surrogates between paperboard packaging materials and air

The suitability of recycled paperboard packaging materials for direct food contact applications is a major area of investigation. Chemical contaminants (surrogates) partitioning between recycled paper packaging and foods may affect the safety and health of the consumer. The partition behavior of all possible organic compounds between cardboards and individual foodstuffs is difficult and too time consuming for being fully investigated. Therefore it may be more efficient to determine these partition coefficients indirectly through experimental determination of the partitioning behavior between cardboard samples and air. In this work, the behavior of organic pollutants present in a set of two paper and board samples intended to be in contact with foods was studied. Adsorption isotherms have been plotted and partition coefficients between paper and air have been calculated as a basis for the estimation of their migration potential into food. Values of partition coefficients (Kpaper/air) from 47 to 1207 were obtained at different temperatures. For the less volatile surrogates such as dibutyl phthalate and methyl stearate higher Kpaper/air values were obtained. The adsorption curves showed that the more volatile substances are partitioning mainly in air phase and increasing the temperature from 70 to 100 degrees C their concentrations in air (Cair) have almost doubled. The analysis of surrogates was performed with a method based on solvent extraction and gas chromatographic-flame ionization detection (GC-FID) quantification.

Effectiveness of polypropylene film as a barrier to migration from recycled paperboard packaging to fatty and high-moisture food

The capability of a polypropylene (PP) film barrier to prevent migration of residual contaminants from recycled paperboard into food simulants was studied. Anthracene, benzophenone, methyl stearate and pentachlorophenol were chosen as chemical surrogates to represent classes of contaminants likely to be found in recycled paper/paperboard. Each surrogate was spiked into a test specimen made of seven thin virgin paper layers at concentrations of 1-50 mg kg(-1). Test specimen were dried, stacked and sandwiched with PP films, laminated with PP film and then subjected to migration experiments using a compression cell maintained at 100 degrees C for 2 h. The concentration of the surrogates in the test specimen and in 95% ethanol, isopropanol and 10% ethanol food-simulating solvents was determined by gas chromatography with flame ionization and electron capture detection. The results show that although the concentrations of the surrogates in the food simulants decreased with an increase in PP film thickness, they were still high and generally resulted in dietary concentrations >0.5 microg kg(-1), the level that US Food and Drug Administration would equate with negligible risk for a contaminant migrating from food packaging. Only at the lowest spiking level (1 mg kg(-1) benzophenone) did migration from the paperboard through a 0.127-mm PP film result in a dietary concentration of </=0.5 microg kg(-1). Therefore, it can be concluded that for an extended time at 100 degrees C, PP would not be an acceptable barrier to migration of contaminants that are expected to be in post-consumer paper/paperboard.

Migration of surrogate contaminants in paper and paperboard into water through polyethylene coating layer

The migration of five surrogate contaminants, anthracene, benzophenone, dimethyl phthalate, methyl stearate and pentachlorophenol, from paper and paperboard into water through a polyethylene (PE) coating layer was investigated. Virgin paper and paperboard coated with PE films of 0.012 and 0.030 mm thickness were spiked evenly with standard 1-ml solutions containing 5mg of each surrogate. The spiked papers were placed in contact with the PE coating layer at 10 and 24 degrees C for 21 days. The resulting surrogate migration through the PE layer into 100ml water was measured by an analytical method developed here that used gas chromatography equipped with a flame ionization detector. Non-polar surrogates of anthracene and methyl stearate did not show any significant migration. In the case of the thin layer coating of 0.012 mm, polar water-soluble contaminants of benzophenone, dimethyl phthalate and pentachlorophenol showed an equilibrated or maximized migration after 1 day, even at a refrigerated temperature of 10 degrees C. A thick PE coating of 0.030 mm thickness delayed the progress of contaminant migration, which was also slower at lower temperature. Our results indicate that polyethylene coatings should not be seen as a complete barrier against possible contaminants in paper packaging materials under chilled or ambient conditions. Several variables such as coating thickness, temperature and suspected contaminants need to be considered to control the possible contamination risk from recycled or printed paper.

Programme on the recyclability of food-packaging materials with respect to food safety considerations: polyethylene terephthalate (PET), paper and board, and plastics covered by functional barriers

Stimulated by new ecology-driven European and national regulations, news routes of recycling waste appear on the market. Since food packages represent a large percentage of the plastics consumption and since they have a short lifetime, an important approach consists in making new packages from post-consumer used packages. On the other hand, food-packaging regulations in Europe require that packaging materials must be safe. Therefore, potential mass transfer (migration) of harmful recycling-related substances to the food must be excluded and test methods to ensure the safety-in-use of recycled materials for food packaging are needled. As a consequence of this situation, a European research project FAIR-CT98-4318, with the acronym 'Recyclability', was initiated. The project consists of three sections each focusing on a different class of recycled materials: polyethylene terephthalate (PET), paper and board, and plastics covered by functional barriers. The project consortium consists of 28 project members from 11 EU countries. In addition, the project is during its lifetime in discussion with the US Food and Drug Administrations (FDA) to consider also US FDA regulatory viewpoints and to aim, as a consequence, to harmonizable conclusions and recommendations. The paper introduces the project and presents an overview of the project work progress.

Toxicity testing and chemical analyses of recycled fibre-based paper for food contact

Food-contact materials, including paper, have to comply with a basic set of criteria concerning safety. This means that paper for food contact should not give rise to migration of components, which can endanger human health. The objectives of this pilot study were, first, to compare paper of different qualities as food-contact materials and to perform a preliminary evaluation of their suitability, from a safety point of view, and, second, to evaluate the use of different in vitro toxicity tests for screening of paper and board. Paper produced from three different categories of recycled fibres (B-D) and a raw material produced from virgin fibres (A) were obtained from industry, and extracts were examined by chemical analyses and diverse in vitro toxicity test systems. The products tested were either based on different raw materials or different treatments were applied. Paper category B was made from 40% virgin fibres, 40% unprinted cuttings from newspapers, and 20% de-inked newspapers and magazines. Paper categories C and D were based on newspapers and magazines. However, paper D was de-inked, whereas C was not. To identify constituents of the papers with a potential to migrate into foodstuff, samples of the paper products were extracted with either 99% ethanol or water. Potential migrants in the extracts were identified and semiquantified by GC-IR-MS or GC-HRMS. In parallel to the chemical analyses, a battery of four different in vitro toxicity tests with different endpoints were applied to the same extracts. (1) a cytotoxicity test using normal human skin fibroblasts. The test was based on measurements of the reduction of resazurin to resorufin by cellular redox processes and used as a screening test for acute or general toxicity; (2) a Salmonella/microsome assay (Ames test) as a screening test for mutagenic and potentially carcinogenic compounds; (3) a recombinant yeast cell bioassay as a screening test for compounds with oestrogenic activity; (4) an aryl hydrocarbon (Ah)-receptor assay (CALUX assay) as a screening test for compounds with dioxin-like activity. In addition, the papers were testedfor microbial content and, in general, the microbiological load was quite low. The following microorganisms were counted and identified on both surface and homogenized pulp samples: the total number of aerobic bacteria, the number of aerobic and anaerobic spore formers, the number of Bacillus cereus/thuringiensis, and the number of yeast and moulds. The chemical analyses showed a significantly higher amount and different composition pattern of chemicals extracted with ethanol compared with water. Analyses of the ethanol extracts showed a distinctly smaller number and lower concentrations of chemicals in extracts prepared from sample A compared with extracts of samples B-D. The compounds identified in B-D were similar, but the amounts were lower in B compared with C and D. In accordance with the chemical analyses, the water extracts were less cytotoxic than the ethanol extracts. The extract prepared from virgin fibres was less cytotoxic than the extracts prepared from paper made from recycled fibres, and extracts prepared from C was the most cytotoxic. None of the extracts showed mutagenic activity. No conclusion about the oestrogenic activity could be made, because all extracts were cytotoxic to the test organism (yeast cells). Ethanol extracts of A and B showed a negligible positive response in the Ah-receptor assay at the highest nontoxic concentration, whereas C and D showed a more pronounced effect with C being the most potent. A comparable weak effect of water extracts of samples B-D was observed, too. However, the active compound(s) was not identified by chemical analyses.

European priorities for research to support legislation in the area of food contact materials and articles

A strong science base is required to underpin the planning and decision-making process involved in determining future European community legislation on materials and articles in contact with food. Significant progress has been made in the past 5 years in European funded work in this area, with many developments contributing to a much better understanding of the migration process, and better and simpler approaches to food control. In this paper this progress is reviewed against previously identified work-areas (identified in 1994) and conclusions are reached about future requirements for R&D to support legislation on food contact materials and articles over the next 5 or so years.

Effects of micronutrients on metal toxicity

There is growing evidence that micronutrient intake has a significant effect on the toxicity and carcinogenesis caused by various chemicals. This paper examines the effect of micronutrient status on the toxicity of four nonessential metals: cadmium, lead, mercury, and arsenic. Unfortunately, few studies have directly examined the effect of dietary deficiency or supplementation on metal toxicity. More commonly, the effect of dietary alteration must be deduced from the results of mechanistic studies. We have chosen to separate the effect of micronutrients on toxic metals into three classes: interaction between essential micronutrients and toxic metals during uptake, binding, and excretion; influence of micronutrients on the metabolism of toxic metals; and effect of micronutrients on secondary toxic effects of metals. Based on data from mechanistic studies, the ability of micronutrients to modulate the toxicity of metals is indisputable. Micronutrients interact with toxic metals at several points in the body: absorption and excretion of toxic metals; transport of metals in the body; binding to target proteins; metabolism and sequestration of toxic metals; and finally, in secondary mechanisms of toxicity such as oxidative stress. Therefore, people eating a diet deficient in micronutrients will be predisposed to toxicity from nonessential metals.