Synthesis and characterization of manganese ferrite nanostructure by co-precipitation, sol-gel, and hydrothermal methods

Targeting Manganese Amidinate and ß-Ketoiminate Complexes as Precursors for Mn-Based Thin Film Deposition

With a focus on Mn based organometallic compounds with suitable physico-chemical properties to serve as precursors for chemical vapor deposition (CVD) and atomic layer deposition (ALD) of Mn-containing materials, systematic synthetic approaches with ligand variation, detailed characterization, and theoretical input from density functional theory (DFT) studies are presented. A series of new homoleptic all-nitrogen and mixed oxygen/nitrogen-coordinated Mn(II) complexes bearing the acetamidinate, formamidinate, guanidinate and ß-ketoiminate ligands have been successfully synthesized for the first time. The specific choice of these ligand classes with changes in structure and coordination sphere and side chain variations result in significant structural differences whereby mononuclear and dinuclear complexes are formed. This was supported by density functional theory (DFT) studies. The compounds were thoroughly characterized by single crystal X-ray diffraction, magnetic measurements, mass spectrometry and elemental analysis. To evaluate their suitability as precursors for deposition of Mn-based materials, the thermal properties were investigated in detail. Mn(II) complexes possessing the most promising thermal properties, namely Bis(N,N'-ditertbutylformamidinato)manganese(II) (IV) and Bis(4-(isopropylamino)pent-3-en-2-onato)manganese(II) (ßIII) were used in reactivity studies with DFT to explore their interaction with oxidizing co-reactants such as oxygen and water which will guide future CVD and ALD process development.

Electrosprayed hierarchical mesoporous Mn0.5Ti2(PO4)3@C microspheres as promising High-Performance anode for Potassium-Ion batteries

NASICON-structured Ti-based polyanion compounds benefit from a stable structural framework, large ion channels, and fast ion mobility. However, the large radius of potassium and its poor electronic conductivity restrict its use in potassium-ion batteries. Herein, hierarchical mesoporous Mn0.5Ti2(PO4)3@C microspheres have been successfully synthesized using a simple electrospraying method. These microspheres consist of Mn0.5Ti2(PO4)3 nanoparticles evenly embedded in three-dimensional mesoporous carbon microspheres. The hierarchical mesoporous micro/nanostructure facilitates the rapid insertion and extraction of K+, while the three-dimensional carbon microspheres matrix enhances electrical conductivity and prevents active materials from collapsing during cycling. So the hierarchical mesoporous Mn0.5Ti2(PO4)3@C microspheres exhibit a high reversible discharge specific capacity (306 mA h g-1 at 20 mA g-1), a notable rate capability (123 mA h g-1 at 5000 mA g-1), and exceptional cycle performance (148 mA h g-1 at 500 mA g-1 after 1000 cycles). The results show that electrosprayed Mn0.5Ti2(PO4)3@C microspheres are a promising anode for PIBs.

CdAl4O7/CdO nanocomposites: green tea extract-mediated sol-gel auto-combustion synthesis, characterization, and study as a potential hydrogen storage material

In this article, we present the synthesis of binary CdAl4O7/CdO nanocomposites using green tea extracts and green chemistry methods for high-performance hydrogen storage. The green tea extract contains bioactive compounds (polyphenols) that act as reducing agents, which facilitate the reaction between metal ions and water. By examining the structural and morphological characteristics of the obtained substrates using scanning electron microscopy (SEM), X-ray diffraction (XRD), transmission electron microscopy (TEM), and Fourier transform infrared spectroscopy (FT-IR), it was demonstrated that the nanocomposites were successfully synthesized. We evaluated the electrochemical performance of the synthesized CdAl4O7/CdO nanocomposites using a three-electrode chronopotentiometry system. According to the results, the synthesized nanocomposites are capable of storing 1750 mAh/g of hydrogen at a constant current of 1 Amp. By using green tea extract as a natural structure-directing agent, the CdAl4O7/CdO nanocomposite can be developed more sustainably as high-performance hydrogen storage materials. Ultimately, this work contributes to the advancement of sustainable energy storage through the synthesis of a promising new material.

Biogenic synthesis of novel nanomaterials and their applications

Despite the many benefits derived from the unique features and practicality of nanoparticles, the release of their toxic by-products or products from the synthesis stage into the environment could negatively impact natural resources and organisms. The physical and chemical methods for nanoparticle synthesis involve high energy consumption and the use of hazardous chemicals, respectively, going against the principles of green chemistry. Biological methods of synthesis that rely on extracts from a broad range of natural plants, and microorganisms, such as fungi, bacteria, algae, and yeast, have emerged as viable alternatives to the physical and chemical methods. Nanoparticles synthesized through biogenic pathways are particularly useful for biological applications that have high concerns about contamination. Herein, we review the physical and chemical methods of nanoparticle synthesis and present a detailed overview of the biogenic methods used for the synthesis of different nanoparticles. The major points discussed in this study are the following: (1) the fundamentals of the physical and chemical methods of nanoparticle syntheses, (2) the use of different biological precursors (microorganisms and plant extracts) to synthesize gold, silver, selenium, iron, and other metal nanoparticles, and (3) the applications of biogenic nanoparticles in diverse fields of study, including the environment, health, material science, and analytical chemistry.

Improved supercapacitor application of manganese ferrite nanoparticles via co-precipitation technique

The novel co-precipitation technique has been employed to create the manganese ferrite nanoparticle. The prepared sample was annealed for various temperatures 400 °C, 600 °C and 700 °C. Based on TG/DT analysis the optimal temperature was found to be 700 °C and further additional analysis was performed for the sample annealed at 700 °C. Their morphology and properties were determined using SEM, HR-TEM, EDX, FTIR, XPS, BET, and CV techniques. Using the X-ray diffraction technique, the prepared sample's structural characteristics were demonstrated. The SEM as well as HR-TEM images showed the nanoparticles had a roughly spherical shape. The EDX analysis confirmed the presence of the elements Fe, O, and Mn in the sample; there was no evidence of contamination by other elements. The specific surface area of the nanoparticles was estimated by BET analysis, which provides details of the material's porosity and surface area. The binding energy of the sample was estimated using XPS measurements, which provide details on the composition and chemical states of the individual elements. By using cyclic voltammetry, the nanoparticles' electrochemical characteristics were evaluated. For a reduced scan rate of 2 mVs-1, the specific capacitance value was discovered to be 341 Fg-1, confirming their suitability for super capacitor applications.

Evaluation of synergistic approach of spinel cadmium-copper nanoferrites as magnetic catalysts for promoting wastewater decontamination: Impact of Ag ions doping

Metal substitution is an efficient strategy to improve the catalytic activity of ferrite-based catalysts. In this study, Cd0.5Cu0.5-xAgxFe2O4 (where 0 ≤ x ≤ 0.5) ferrites were fabricated via a simple co-precipitation method. The influence of the silver ions on the structural, magnetic, and catalytic characteristics of the spinel nanoparticles, as well as on their morphology, was examined. X-ray diffractograms revealed a crystalline cubic spinel structure with crystallite sizes in the nanoregime (7-15 nm). The saturation magnetization reduced from 29.8 to 2.80 emu as the Ag+ doping increased. Two prominent absorption bands were visible in Fourier-transform infrared spectra at 600 cm-1 and 400 cm-1, respectively, and they belonged to the tetrahedral (A) and octahedral (B) sites. The samples were then used as catalysts for the oxidative breakdown of the typical organic contaminant indigo carmine dye (IC). The catalytic process followed the first-order kinetic model, and the rate constant increased from 0.007 to 0.023 min-1 with increasing of Ag+ doping. Cd0.5Cu0.5-xAgxFe2O4 exhibited excellent catalytic performance in the pH range of 2-11, which means that they are promising efficient and stable materials for Fenton-based alkaline wastewater treatment. Finally, the pathway includes, HO•, HO2-•, and O2-• as oxidants resulted from the synergistic effects of Fe3+, Cu2+, and Ag+, with H2O2 and surface hydroxyl groups have been proposed.

Water splitting by MnFe2O4/Na2CO3 reversible redox reactions

Future energy systems must call upon clean and renewable sources capable of reducing associated CO2 emissions. The present research opens new perspectives for renewable energy-based hydrogen production by water splitting using metal oxide oxidation/reduction reactants. An earlier multicriteria assessment defined top priorities, with MnFe2O4/Na2CO3/H2O and Mn3O4/MnO/NaMnO2/H2O multistep redox cycles having the highest potential. The latter redox system was previously assessed and proven difficult to be conducted. The former redox system was hence experimentally investigated in the present research at the 0.5 to 250 g scale in isothermal thermogravimetry, an electrically heated furnace, and a concentrated solar reactor. Over 30 successive oxidation/reduction cycles were assessed, and the H2 production efficiencies exceeded 98 % for the coprecipitated reactant after these multiple cycles. Tentative economics using a coprecipitated reactant revealed that 120 cycles are needed to achieve a 1 € per kg H2 cost. Improving the cheaper ball-milled reactant could reduce costs by approximately 30 %. The initial results confirm that future research is important.

Synthesis of nanomaterials using various top-down and bottom-up approaches, influencing factors, advantages, and disadvantages: A review

Nanotechnology is one of the emerging fields of the 21st Century. Many new devices and patentable technology is based on nanomaterials (NMs). One of the dominant factors in the use of nanomaterials and their applications in various fields is the synthesis and growth mechanism of nanostructures and nanomaterials. A nanostructured material may have been a good candidate in one application but could be more useful in a different application if synthesized by a different mechanism and technique. Similarly, the structure and morphology of a nanomaterial also depend upon the method of growth and synthesis. For example, it is easy to grow and synthesize amorphous nanostructured thin film using the plasma magnetron sputtering technique, but it may be difficult to obtain a similar structure using the thermal evaporation process due to the nature of the technique itself. In this study, the Top-down and Bottom-up methods and techniques of synthesizing nanostructured materials are reviewed, compared, and analyzed. Both approaches are critically analyzed, and the influencing factors on the synthesis of different nanomaterials, the advantages, and disadvantages of each technique are reported. This review also provides a step-by-step analysis of the choice of method for the synthesis of namomaterials for specific applications.

Nonlinear Isotherm and Kinetic Modeling of Cu(II) and Pb(II) Uptake from Water by MnFe2O4/Chitosan Nanoadsorbents

Researchers are in continuous search of better strategies to minimize, if not prevent, the anthropogenic release of toxic heavy metals, such as Cu(II) and Pb(II), into drinking water resources and the natural environment. Herein, we report for the first time the low-temperature combustion synthesis of magnetic chitosan-manganese ferrite in the absence of toxic cross-linking agents and its removal of Cu(II) and Pb(II) from single-component metal solutions. The nonlinear Langmuir model best described the isotherm data, while the nonlinear pseudo-second order model best described the kinetic data, signifying monolayer Cu(II) or Pb(II) adsorption and chemisorption as the rate-determining step, respectively. Adsorption capacities by magnetic chitosan-manganese ferrite obtained for both metals were consistently higher than those by manganese ferrite, indicating that chitosan enhanced the performance of the magnetic adsorbent. The maximum adsorption capacities of magnetic chitosan-manganese ferrite for Cu(II) and Pb(II) were 14.86 and 15.36 mg g−1, while that of manganese ferrite were 2.59 and 13.52 mg g−1, respectively. Moreover, the adsorbents showed superior binding affinity and sorption for Pb(II) than Cu(II) owing to the stronger ability of the former to form inner-sphere complexes with manganese ferrite and magnetic chitosan-manganese ferrite. Finally, thermodynamic studies revealed that the uptake of either Pb(II) or Cu(II) by magnetic chitosan-manganese ferrite was spontaneous and endothermic. The as-prepared adsorbent was characterized for morphology, elemental composition, surface functional sites, and particle size using scanning electron microscopy, energy dispersive spectroscopy, Fourier transform infrared spectroscopy, and dynamic light scattering technique, respectively.

Preparation and Characterization of Chitosan-Coated Manganese-Ferrite Nanoparticles Conjugated with Laccase for Environmental Bioremediation

Bioremediation with immobilized enzymes has several advantages, such as the enhancement of selectivity, activity, and stability of biocatalysts, as well as enzyme reusability. Laccase has proven to be a good candidate for the removal of a wide range of contaminants. In this study, naked or modified MnFe₂O₄ magnetic nanoparticles (MNPs) were used as supports for the immobilization of laccase from Trametes versicolor. To increase enzyme loading and stability, MNPs were coated with chitosan both after the MNP synthesis (MNPs-CS) and during their formation (MNPs-CS_{in situ}). SEM analysis showed different sizes for the two coated systems, 20 nm and 10 nm for MNPs-CS and MNPs-CS_{in situ}, respectively. After covalent immobilization of laccase by glutaraldehyde, the MNPs-CS_{in situ}-lac and MNPs-CS-lac systems showed a good resistance to temperature denaturation and storage stability. The most promising system for use in repeated batches was MNPs-CS_{in situ}-lac, which degraded about 80% of diclofenac compared to 70% of the free enzyme. The obtained results demonstrated that the MnFe₂O₄-CS_{in situ} system could be an excellent candidate for the removal of contaminants.

A comparative study of ceramic nanoparticles synthesized for antibiotic removal: catalysis characterization and photocatalytic performance modeling

The heterogeneous photocatalysis process has been known to provide significant levels of degradation and mineralization of emerging contaminants including antibiotics. For that, nanoparticle CuCr₂O₄ (CCO) ceramics were successfully prepared via sol-gel (SG) and co-precipitation (CP) methods to obtain spinel with desired structural features and properties and also to improve the photocatalytic performances. The CCO crystallite phase was produced at 750 °C all ceramics, disregarding the synthesis route. CCO physical and chemical properties were checked by X-ray diffraction (XRD) with Rietveld refinement, Brunauer-Emmett-Teller (BET), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscope (SEM), transmission electron microscope (TEM), and diffuse reflectance solid (DRS). The XRD patterns demonstrated that the synthesized catalysts displayed a small crystallite size between 17.45 and 26.24 nm for SG and 20.97 and 36.86 nm for the CCO_CP samples. The observation by SEM and TEM of the nanopowders showed a typical morphology with comparable particle sizes for both synthesized routes (20-30 nm). SG agglomeration rates were higher, and particles stick together more efficiently considering the CP method, while the CCO_CP method led to a more significant porosity. Their photocatalytic and adsorption performances were examined for cefaclor (CFC) removal chosen as a target pharmaceutical contaminant in water. The results obtained by the methods differed since nanoparticles prepared by SG led to high photocatalytic activity. In contrast, a high CFC adsorption was observed for those prepared via the CP method, and that agreed with the findings of the characterization analysis. The kinetics of the adsorption process was found to follow the pseudo-second-order rate law. In contrast, the data of the photodegradation process were further found to comply with the Lagergren kinetic law. Nevertheless, the global reaction rate is probably controlled by the intra-particular diffusion of CFC, regardless of the elimination process.

Shape Anisotropic Iron Oxide-Based Magnetic Nanoparticles: Synthesis and Biomedical Applications

Research on iron oxide-based magnetic nanoparticles and their clinical use has been, so far, mainly focused on the spherical shape. However, efforts have been made to develop synthetic routes that produce different anisotropic shapes not only in magnetite nanoparticles, but also in other ferrites, as their magnetic behavior and biological activity can be improved by controlling the shape. Ferrite nanoparticles show several properties that arise from finite-size and surface effects, like high magnetization and superparamagnetism, which make them interesting for use in nanomedicine. Herein, we show recent developments on the synthesis of anisotropic ferrite nanoparticles and the importance of shape-dependent properties for biomedical applications, such as magnetic drug delivery, magnetic hyperthermia and magnetic resonance imaging. A brief discussion on toxicity of iron oxide nanoparticles is also included.

Recent Progress in Application of Molybdenum-Based Catalysts for Epoxidation of Alkenes

Epoxides are important industrial intermediates applied in a variety of industrial processes. During the production of epoxides, catalysts have played an irreplaceable and unique role. In this review, the historic progress of molybdenum-based catalysts in alkene epoxidation are covered and an outlook on future challenge discussed. Efficient catalysts are demonstrated including soluble molybdenum complexes, polyoxometalates catalysts, molybdenum-containing metal organic frameworks, silica supported molybdenum-based catalysts, polymer supported molybdenum-based catalysts, magnetic molybdenum-based catalysts, hierarchical molybdenum-based catalysts, graphene-based molybdenum containing catalysts, photocatalyzed epoxidation catalysts, and some other systems. The effects of different solvents and oxidants are discussed and the mechanisms of epoxidation are summarized. The challenges and perspectives to further enhance the catalytic performances in alkenes epoxidation are presented.