Development of the vestigial tooth primordia as part of mouse odontogenesis

Genetic, Epigenetic and Environmental Factors Influence the Phenotype of Tooth Number, Size and Shape: Anterior Maxillary Supernumeraries and the Morphology of Mandibular Incisors

The aim of this study is to investigate whether the genetic, epigenetic and environmental factors that give rise to supernumeraries in the maxillary incisor region and larger dimensions of the adjacent maxillary incisors are also associated with variations in the morphology of the mandibular incisors. If so, this would contribute to understanding the distribution and interactions of factors during dental development and how these can be modelled. The sample consisted of 34 patients with supernumerary teeth in the maxillary anterior region, matched for gender, age and White Caucasian ethnicity with 34 control subjects. The average ages of the supernumerary and control groups were 12.8 and 12.2 years, respectively. Study models of all subjects were constructed and imaged using a previously validated system. Using custom software, each of the mandibular incisor teeth were measured to obtain 17 parameters from the labial view and 17 from the occlusal view. Principal component analysis (PCA) was used to summarize the measurements into a smaller set representing distinct features of the clinical crowns, followed by a comparison between the supernumerary and control groups using 2-way ANOVA. Seven factors of tooth size of the mandibular central incisors and six factors of the mandibular lateral incisors were identified as major features of the clinical crowns. All parameters of both mandibular incisors were greater in the supernumerary group than in the control, with three of these, located in the incisal and cervical regions of the mandibular lateral incisors, being statistically significantly larger. The findings of this study indicate that the aetiological factors associated with supernumerary teeth in the maxillary anterior region also affect tooth crown dimensions of mandibular incisors. This new evidence enhances several models of the interactions of genetic, epigenetic and environmental components of dental development and supports a multi-model approach to increase understanding of this process and its variations.

The developmental origins of heterodonty and acrodonty as revealed by reptile dentitions

Despite the exceptional diversity and central role of dentitions in vertebrate evolution, many aspects of tooth characters remain unknown. Here, we exploit the large array of dental phenotypes in acrodontan lizards, including EDA mutants showing the first vertebrate example of positional transformation in tooth identity, to assess the developmental origins and evolutionary patterning of tooth types and heterodonty. We reveal that pleurodont versus acrodont dentition can be determined by a simple mechanism, where modulation of tooth size through EDA signaling has major consequences on dental formula, thereby providing a new flexible tooth patterning model. Furthermore, such implication of morphoregulation in tooth evolution allows predicting the dental patterns characterizing extant and fossil lepidosaurian taxa at large scale. Together, the origins and diversification of tooth types, long a focus of multiple research fields, can now be approached through evo-devo approaches, highlighting the importance of underexplored dental features for illuminating major evolutionary patterns.

Gas1 Regulates Patterning of the Murine and Human Dentitions through Sonic Hedgehog

The mammalian dentition is a serially homogeneous structure that exhibits wide numerical and morphological variation among multiple different species. Patterning of the dentition is achieved through complex reiterative molecular signaling interactions that occur throughout the process of odontogenesis. The secreted signaling molecule Sonic hedgehog (Shh) plays a key role in this process, and the Shh coreceptor growth arrest-specific 1 (Gas1) is expressed in odontogenic mesenchyme and epithelium during multiple stages of tooth development. We show that mice engineered with Gas1 loss-of-function mutation have variation in number, morphology, and size of teeth within their molar dentition. Specifically, supernumerary teeth with variable morphology are present mesial to the first molar with high penetrance, while molar teeth are characterized by the presence of both additional and absent cusps, combined with reduced dimensions and exacerbated by the presence of a supernumerary tooth. We demonstrate that the supernumerary tooth in Gas1 mutant mice arises through proliferation and survival of vestigial tooth germs and that Gas1 function in cranial neural crest cells is essential for the regulation of tooth number, acting to restrict Wnt and downstream FGF signaling in odontogenic epithelium through facilitation of Shh signal transduction. Moreover, regulation of tooth number is independent of the additional Hedgehog coreceptors Cdon and Boc, which are also expressed in multiple regions of the developing tooth germ. Interestingly, further reduction of Hedgehog pathway activity in Shh^tm6Amc hypomorphic mice leads to fusion of the molar field and reduced prevalence of supernumerary teeth in a Gas1 mutant background. Finally, we demonstrate defective coronal morphology and reduced coronal dimensions in the molar dentition of human subjects identified with pathogenic mutations in GAS1 and SHH/GAS1, suggesting that regulation of Hedgehog signaling through GAS1 is also essential for normal patterning of the human dentition.

Activated Epithelial FGF8 Signaling Induces Fused Supernumerary Incisors

FGF8, which is specifically expressed in the dental epithelium prior to the E12.5 bud stage, is a key player during odontogenesis, being responsible for the initiation of tooth development. Here, to investigate the impact of persistent FGF8 signaling on tooth development, we forcibly activated FGF8 signaling in the dental epithelium after the bud stage by generating K14-Cre;R26R-Fg8 mice. We found that a unique type of fused supernumerary incisors is formed, although morphologically resembling the features of type II dens invaginatus in humans. Further analysis revealed that ectopically activated epithelial FGF8 alters the cell fate of the incisor lingual outer enamel epithelium, endowing it with odontogenic potential by the activation of several key tooth genes, including Pitx2, Sox2, Lef-1, p38, and Erk1/2, and induces de novo formation of an extra incisor crown lingually in parallel to the original one, leading to the formation of an extra incisor crown and fused with the original incisor eventually. Meanwhile, the overdosed epithelial FGF8 signaling dramatically downregulates the expression of mesenchymal Bmp4, leading to severely impaired enamel mineralization. Based on the location of the extra incisors, we propose that they are likely to be rescued replacement teeth. Our results further demonstrate the essential role of FGF8 signaling for tooth initiation and the establishment of progenitor cells of dental epithelial stem cells during development.

Unexpected variation of human molar size patterns

A tenet of mammalian, including primate dental evolution, is the Inhibitory Cascade Model, where first molar (M1) size predicts in a linear cline the size and onset time of the second (M2) and third (M3) molars: a larger M1 portends a progressively smaller and later-developing M2 and M3. In contemporary modern Homo sapiens, later-developing M3s are less likely to erupt properly. The Inhibitory Cascade Model is also used to predict molar sizes of extinct taxa, including fossil Homo. The extent to which Inhibitory Cascade Model predictions hold in contemporary H. sapiens molars is unclear, including whether this tenet informs about molar initiation, development, and eruption. We tested these questions here. In our radiographic sample of 323 oral quadrants and molar rows from contemporary humans based on mesiodistal crown lengths, we observed the distribution of molar proportions with a central tendency around parity (M1 = M2 = M3) that parsed into 13 distinct molar size ratio patterns. These patterns presented at different frequencies (e.g., M1 > M2 > M3 in about one-third of cases) that reflected whether the molar row was located in the maxilla or mandible and included both linear (e.g., M1 < M2 < M3) and nonlinear molar size ratio progressions (e.g., M1 > M2 < M3). Up to four patterns were found in the same subject's mouth. Lastly, M1 size alone does not predict M3 size, developmental timing, or eruption; rather, M2 size is integral to predicting M3 size. Our study indicates that human molar size is genetically 'softwired' and sensitive to factors local to the human upper jaw vs. lower jaw. The lack of a single stereotypical molar size ratio for contemporary H. sapiens suggests that predictions of fossil H. sapiens molar sizes using the Inhibitory Cascade Model must be made with caution.

Role of Cell Death in Cellular Processes During Odontogenesis

The development of a tooth germ in a precise size, shape, and position in the jaw, involves meticulous regulation of cell proliferation and cell death. Apoptosis, as the most common type of programmed cell death during embryonic development, plays a number of key roles during odontogenesis, ranging from the budding of the oral epithelium during tooth initiation, to later tooth germ morphogenesis and removal of enamel knot signaling center. Here, we summarize recent knowledge about the distribution and function of apoptotic cells during odontogenesis in several vertebrate lineages, with a special focus on amniotes (mammals and reptiles). We discuss the regulatory roles that apoptosis plays on various cellular processes during odontogenesis. We also review apoptosis-associated molecular signaling during tooth development, including its relationship with the autophagic pathway. Lastly, we cover apoptotic pathway disruption, and alterations in apoptotic cell distribution in transgenic mouse models. These studies foster a deeper understanding how apoptotic cells affect cellular processes during normal odontogenesis, and how they contribute to dental disorders, which could lead to new avenues of treatment in the future.

Timing of Mouse Molar Formation Is Independent of Jaw Length Including Retromolar Space

For humans and other mammals to eat effectively, teeth must develop properly inside the jaw. Deciphering craniodental integration is central to explaining the timely formation of permanent molars, including third molars which are often impacted in humans, and to clarifying how teeth and jaws fit, function and evolve together. A factor long-posited to influence molar onset time is the jaw space available for each molar organ to form within. Here, we tested whether each successive molar initiates only after a minimum threshold of space is created via jaw growth. We used synchrotron-based micro-CT scanning to assess developing molars in situ within jaws of C57BL/6J mice aged E10 to P32, encompassing molar onset to emergence. We compared total jaw, retromolar and molar lengths, and molar onset times, between upper and lower jaws. Initiation time and developmental duration were comparable between molar upper and lower counterparts despite shorter, slower-growing retromolar space in the upper jaw, and despite size differences between upper and lower molars. Timing of molar formation appears unmoved by jaw length including space. Conditions within the dental lamina likely influence molar onset much more than surrounding jaw tissues. We theorize that molar initiation is contingent on sufficient surface area for the physical reorganization of dental epithelium and its invagination of underlying mesenchyme.

Development of tooth regenerative medicine strategies by controlling the number of teeth using targeted molecular therapy

Analysis of various genetically modified mice, with supernumerary teeth, has revealed the following two intrinsic molecular mechanisms that increase the number of teeth. One plausible explanation for supernumerary tooth formation is the rescue of tooth rudiments. Topical application of candidate molecules could lead to whole tooth formation under suitable conditions. Congenital tooth agenesis is caused by the cessation of tooth development due to the deletion of the causative gene and suppression of its function. The arrest of tooth development in Runx2 knockout mice, a mouse model of congenital tooth agenesis, is rescued in double knockout mice of Runx2 and Usag-1. The Usag-1 knockout mouse is a supernumerary model mouse. Targeted molecular therapy could be used to generate teeth in patients with congenital tooth agenesis by stimulating arrested tooth germs. The third dentition begins to develop when the second successional lamina is formed from the developing permanent tooth in humans and usually regresses apoptotically. Targeted molecular therapy, therefore, seems to be a suitable approach in whole-tooth regeneration by the stimulation of the third dentition. A second mechanism of supernumerary teeth formation involves the contribution of odontogenic epithelial stem cells in adults. Cebpb has been shown to be involved in maintaining the stemness of odontogenic epithelial stem cells and suppressing epithelial-mesenchymal transition. Odontogenic epithelial stem cells are differentiated from one of the tissue stem cells, enamel epithelial stem cells, and odontogenic mesenchymal cells are formed from odontogenic epithelial cells by epithelial-mesenchymal transition. Both odontogenic epithelial cells and odontogenic mesenchymal cells required to form teeth from enamel epithelial stem cells were directly induced to form excess teeth in adults. An approach for the development of targeted therapeutics has been the local application of monoclonal neutralizing antibody/siRNA with cationic gelatin for USAG-1 or small molecule for Cebpb.

Developmental variability channels mouse molar evolution

Do developmental systems preferentially produce certain types of variation that orient phenotypic evolution along preferred directions? At different scales, from the intra-population to the interspecific, the murine first upper molar shows repeated anterior elongation. Using a novel quantitative approach to compare the development of two mouse strains with short or long molars, we identified temporal, spatial and functional differences in tooth signaling center activity, that arise from differential tuning of the activation-inhibition mechanisms underlying tooth patterning. By tracing their fate, we could explain why only the upper first molar reacts via elongation of its anterior part. Despite a lack of genetic variation, individuals of the elongated strain varied in tooth length and the temporal dynamics of their signaling centers, highlighting the intrinsic instability of the upper molar developmental system. Collectively, these results reveal the variational properties of murine molar development that drive morphological evolution along a line of least resistance.

Over time species develop random mutations in their genetic sequence that causes their form to change. If this new form increases the survival of a species it will become favored through natural selection and is more likely to get passed on to future generations. But, the evolution of these new traits also depends on what happens during development.

Developmental mechanisms control how an embryo progresses from a single cell to an adult organism made of many cells. Mutations that alter these processes can influence the physical outcome of development, and cause a new trait to form. This means that if many different mutations alter development in a similar way, this can lead to the same physical change, making it ‘easy’ for a new trait to repeatedly occur. Most of the research has focused on finding the mutations that underlie repeated evolution, but rarely on identifying the role of the underlying developmental mechanisms.

To bridge this gap, Hayden et al. investigated how changes during development influence the shape and size of molar teeth in mice. In some wild species of mice, the front part of the first upper molar is longer than in other species. This elongation, which is repeatedly found in mice from different islands, likely came from developmental mechanisms.

Tooth development in mice has been well-studied in the laboratory, and Hayden et al. started by identifying two strains of laboratory mice that mimic the teeth seen in their wild cousins, one with elongated upper first molars and another with short ones. Comparing how these two strains of mice developed their elongated or short teeth revealed key differences in the embryonic structures that form the upper molar and cause it to elongate. Further work showed that variations in these embryonic structures can even cause mice that are genetically identical to have longer or shorter upper first molars.

These findings show how early differences during development can lead to small variations in form between adult species of mice. This study highlights how studying developmental differences as well as genetic sequences can further our understanding of how different species evolved.

Coordination of bilateral tooth replacement in the juvenile gecko is continuous with in ovo patterning

We performed a test of how function impacts a genetically programmed process that continues into postnatal life. Using the dentition of the polyphyodont gecko as our model, tooth shedding was recorded longitudinally across the jaw. We compared two time periods: one in which teeth were patterned symmetrically in ovo and a later period when teeth were initiated post-hatching. By pairing shedding events on the right and left sides, we found the patterns of tooth loss are symmetrical and stable between periods, with only subtle deviations. Contralateral tooth positions shed within 3-4 days of each other in most animals (7/10). A minority of animals (3/10) had systematic tooth position shifts between right and left sides, likely due to changes in functional tooth number. Our results suggest that in addition to reproducible organogenesis of individual teeth, there is also a neotenic retention of jaw-wide dental patterning in reptiles. Finer analysis of regional asymmetries revealed changes to which contralateral position shed first, affecting up to one quarter of the jaw (10 tooth positions). Once established, these patterns were retained longitudinally. Taken together, the data support regional and global mechanisms of coordinating tooth cycling post-hatching.

SHH signaling directed by two oral epithelium-specific enhancers controls tooth and oral development

Interaction between the epithelium and mesenchyme coordinates patterning and differentiation of oral cavity structures including teeth, palatal rugae and tongue papillae. SHH is one of the key signaling molecules for this interaction. Epithelial expression of Shh in the tooth buds and tongue papillae is regulated by at least two enhancers, MRCS1 and MFCS4. However, it is unclear how the two enhancers cooperate to regulate Shh. Here, we found that simultaneous deletion of MRCS1 and MFCS4 results in the formation of a supernumerary tooth in front of the first molar. Since deletion of either single enhancer barely affects tooth development, MRCS1 and MFCS4 evidently act in a redundant fashion. Binding motifs for WNT signaling mediators are shared by MRCS1 and MFCS4, and play a central role in regulating Shh expression, indicating that the two redundant enhancers additively exert their Shh regulation by responding to WNT signal input.

Lineage tracing of epithelial cells in developing teeth reveals two strategies for building signaling centers

An important event in organogenesis is the formation of signaling centers, which are clusters of growth factor-secreting cells. In the case of tooth development, sequentially formed signaling centers known as the initiation knot (IK) and the enamel knot (EK) regulate morphogenesis. However, despite the importance of signaling centers, their origin, as well as the fate of the cells composing them, remain open questions. Here, using lineage tracing of distinct epithelial populations, we found that the EK of the mouse incisor is derived de novo from a group of SRY-box 2 (Sox2)-expressing cells in the posterior half of the tooth germ. Specifically, EK progenitors are located in the posterior ventral basal layer, as demonstrated by DiI labeling of cells. Lineage tracing the formed EK with Shh^CreER , which encodes an inducible Cre recombinase under the control of the Sonic hedgehog promoter, at subsequent developmental stages showed that, once formed, some EK cells in the incisor give rise to differentiated cells, whereas in the molar, EK cells give rise to the buccal secondary EK. This work thus establishes the developmental origin as well as the fate of the EK and reveals two strategies for the emergence of serially formed signaling centers: one through de novo establishment and the other by incorporation of progeny from previously formed signaling centers.

Sonic Hedgehog Signaling and Development of the Dentition

Sonic hedgehog (Shh) is an essential signaling peptide required for normal embryonic development. It represents a highly-conserved marker of odontogenesis amongst the toothed vertebrates. Signal transduction is involved in early specification of the tooth-forming epithelium in the oral cavity, and, ultimately, in defining tooth number within the established dentition. Shh also promotes the morphogenetic movement of epithelial cells in the early tooth bud, and influences cell cycle regulation, morphogenesis, and differentiation in the tooth germ. More recently, Shh has been identified as a stem cell regulator in the continuously erupting incisors of mice. Here, we review contemporary data relating to the role of Shh in odontogenesis, focusing on tooth development in mammals and cartilaginous fishes. We also describe the multiple actions of this signaling protein at the cellular level.

Sprouty gene dosage influences temporal-spatial dynamics of primary enamel knot formation

BACKGROUND

The mouse embryonic mandible comprises two types of tooth primordia in the cheek region: progressive tooth primordia of prospective functional teeth and rudimentary tooth primordia in premolar region - MS and R2. Mice lacking Sprouty genes develop supernumerary tooth in front of the lower M1 (first molar) primordium during embryogenesis. We focused on temporal-spatial dynamics of Sonic Hedgehog expression as a marker of early odontogenesis during supernumerary tooth development.

RESULTS

Using mouse embryos with different dosages of Spry2 and Spry4 genes, we showed that during the normal development of M1 in the mandible the sooner appearing Shh signaling domain of the R2 bud transiently coexisted with the later appearing Shh expression domain in the early M1 primordium. Both domains subsequently fused together to form the typical signaling center representing primary enamel knot (pEK) of M1 germ at embryonic day (E) 14.5. However, in embryos with lower Spry2;Spry4 gene dosages, we observed a non-fusion of original R2 and M1 Shh signaling domains with consequent formation of a supernumerary tooth primordium from the isolated R2 bud.

CONCLUSIONS

Our results bring new insight to the development of the first lower molar of mouse embryos and define simple tooth unit capable of individual development, as well as determine its influence on normal and abnormal development of the tooth row which reflect evolutionarily conserved tooth pattern. Our findings contribute significantly to existing knowledge about supernumerary tooth formation.

Manipulation of Fgf and Bmp signaling in teleost fishes suggests potential pathways for the evolutionary origin of multicuspid teeth

Teeth with two or more cusps have arisen independently from an ancestral unicuspid condition in a variety of vertebrate lineages, including sharks, teleost fishes, amphibians, lizards, and mammals. One potential explanation for the repeated origins of multicuspid teeth is the existence of multiple adaptive pathways leading to them, as suggested by their different uses in these lineages. Another is that the addition of cusps required only minor changes in genetic pathways regulating tooth development. Here we provide support for the latter hypothesis by demonstrating that manipulation of the levels of Fibroblast growth factor (Fgf) or Bone morphogenetic protein (Bmp) signaling produces bicuspid teeth in the zebrafish (Danio rerio), a species lacking multicuspid teeth in its ancestry. The generality of these results for teleosts is suggested by the conversion of unicuspid pharyngeal teeth into bicuspid teeth by similar manipulations of the Mexican Tetra (Astyanax mexicanus). That these manipulations also produced supernumerary teeth in both species supports previous suggestions of similarities in the molecular control of tooth and cusp number. We conclude that despite their apparent complexity, the evolutionary origin of multicuspid teeth is positively constrained, likely requiring only slight modifications of a pre-existing mechanism for patterning the number and spacing of individual teeth.

Interactions between BMP-7 and USAG-1 (uterine sensitization-associated gene-1) regulate supernumerary organ formations

Bone morphogenetic proteins (BMPs) are highly conserved signaling molecules that are part of the transforming growth factor (TGF)-beta superfamily, and function in the patterning and morphogenesis of many organs including development of the dentition. The functions of the BMPs are controlled by certain classes of molecules that are recognized as BMP antagonists that inhibit BMP binding to their cognate receptors. In this study we tested the hypothesis that USAG-1 (uterine sensitization-associated gene-1) suppresses deciduous incisors by inhibition of BMP-7 function. We learned that USAG-1 and BMP-7 were expressed within odontogenic epithelium as well as mesenchyme during the late bud and early cap stages of tooth development. USAG-1 is a BMP antagonist, and also modulates Wnt signaling. USAG-1 abrogation rescued apoptotic elimination of odontogenic mesenchymal cells. BMP signaling in the rudimentary maxillary incisor, assessed by expressions of Msx1 and Dlx2 and the phosphorylation of Smad protein, was significantly enhanced. Using explant culture and subsequent subrenal capsule transplantation of E15 USAG-1 mutant maxillary incisor tooth primordia supplemented with BMP-7 demonstrated in USAG-1+/- as well as USAG-1-/- rescue and supernumerary tooth development. Based upon these results, we conclude that USAG-1 functions as an antagonist of BMP-7 in this model system. These results further suggest that the phenotypes of USAG-1 and BMP-7 mutant mice reported provide opportunities for regenerative medicine and dentistry.

Three-dimensional analysis of the early development of the dentition

Tooth development has attracted the attention of researchers since the 19th century. It became obvious even then that morphogenesis could not fully be appreciated from two-dimensional histological sections. Therefore, methods of three-dimensional (3D) reconstructions were employed to visualize the surface morphology of developing structures and to help appreciate the complexity of early tooth morphogenesis. The present review surveys the data provided by computer-aided 3D analyses to update classical knowledge of early odontogenesis in the laboratory mouse and in humans. 3D reconstructions have demonstrated that odontogenesis in the early stages is a complex process which also includes the development of rudimentary odontogenic structures with different fates. Their developmental, evolutionary, and pathological aspects are discussed. The combination of in situ hybridization and 3D reconstruction have demonstrated the temporo-spatial dynamics of the signalling centres that reflect transient existence of rudimentary tooth primordia at loci where teeth were present in ancestors. The rudiments can rescue their suppressed development and revitalize, and then their subsequent autonomous development can give rise to oral pathologies. This shows that tooth-forming potential in mammals can be greater than that observed from their functional dentitions. From this perspective, the mouse rudimentary tooth primordia represent a natural model to test possibilities of tooth regeneration.

Developmental disorders of the dentition: an update

Dental anomalies are common congenital malformations that can occur either as isolated findings or as part of a syndrome. This review focuses on genetic causes of abnormal tooth development and the implications of these abnormalities for clinical care. As an introduction, we describe general insights into the genetics of tooth development obtained from mouse and zebrafish models. This is followed by a discussion of isolated as well as syndromic tooth agenesis, including Van der Woude syndrome (VWS), ectodermal dysplasias (EDs), oral-facial-digital (OFD) syndrome type I, Rieger syndrome, holoprosencephaly, and tooth anomalies associated with cleft lip and palate. Next, we review delayed formation and eruption of teeth, as well as abnormalities in tooth size, shape, and form. Finally, isolated and syndromic causes of supernumerary teeth are considered, including cleidocranial dysplasia and Gardner syndrome.

Aetiology of supernumerary teeth: a literature review

BACKGROUND

Supernumerary teeth are teeth, or tooth-like structures that have either erupted or remain unerupted in addition to the 20 primary and 32 permanent teeth.

AIMS

This paper attempts to (a) provide an overview of the proposed hypotheses and the current understanding of the aetiology of supernumerary teeth, and (b) review the published cases of supernumerary teeth occurring in families.

REVIEW

No studies have been able to distinguish between different aetiologies for the different locations of supernumerary teeth, while, from a developmental or molecular perspective, the proposed hypotheses may be plausible and explains the origin of different types of supernumerary teeth.

CONCLUSION

The only clearly evident feature, based on the existing published reports, is that it is logical to state that supernumerary teeth have a genetic component in their aetiology.

Sequential Shh expression in the development of the mouse upper functional incisor

The mouse incisor is a frequently used model in studies of the molecular control of organ development. The appropriate interpretation of data on normogenesis is essential for understanding the data obtained in mutant mice. For this reason, we performed a very detailed investigation of the development of the upper incisor in wild-type mice from embryonic day (ED) 11.5 till 14.5. A combination of histology, whole mount in situ hybridization, computer-aided three-dimensional reconstructions, and fluorescent microscopy, has been used. Several sonic hedgehog (Shh) expression domains have been detected in the upper incisor region during early prenatal development. At ED11.5-13.5, there was a single Shh positive domain present in the anterior part of left or right upper jaw arches, corresponding to the epithelial thickening. More posteriorly, a new Shh expression domain appeared in the incisor bud in the developmentally more advanced ED13.5 embryos. At ED14.5, only this posterior Shh expression in the incisor germ remained detectable. This study brings new insights into the early development of the upper incisor in mice and completes the data on normal mouse incisor development. The temporal-spatial pattern of Shh expression reflects the development of two tooth generations, being detectable in two successive, antero-posteriorly located areas in the prospective incisor region in the upper jaw. The first, anterior and superficial Shh expression domain reflects the rudimentary tooth development suppressed during evolution. Only the subsequent, posterior and deeper Shh expression region, appearing at ED13.5, correlates with the prospective upper functional incisor in wild-type mice.

The dynamics of supernumerary tooth development are differentially regulated by Sprouty genes

In mice, a toothless diastema separates the single incisor from the three molars in each dental quadrant. In the prospective diastema of the embryo, small rudimentary buds are found that are presumed to be rudiments of suppressed teeth. A supernumerary tooth occurs in the diastema of adult mice carrying mutations in either Spry2 or Spry4. In the case of Spry2 mutants, the origin of the supernumerary tooth involves the revitalization of a rudimentary tooth bud (called R2), whereas its origin in the Spry4 mutants is not known. In addition to R2, another rudimentary primordium (called MS) arises more anteriorly in the prospective diastema. We investigated the participation of both rudiments (MS and R2) in supernumerary tooth development in Spry2 and Spry4 mutants by comparing morphogenesis, proliferation, apoptosis, size and Shh expression in the dental epithelium of MS and R2 rudiments. Increased proliferation and decreased apoptosis were found in MS and R2 at embryonic day (ED) 12.5 and 13.5 in Spry2(-/-) embryos. Apoptosis was also decreased in both rudiments in Spry4(-/-) embryos, but the proliferation was lower (similar to WT mice), and supernumerary tooth development was accelerated, exhibiting a cap stage by ED13.5. Compared to Spry2(-/-) mice, a high number of Spry4(-/-) supernumerary tooth primordia degenerated after ED13.5, resulting in a low percentage of supernumerary teeth in adults. We propose that Sprouty genes were implicated during evolution in reduction of the cheek teeth in Muridae, and their deletion can reveal ancestral stages of murine dental evolution.

From molecules to mastication: the development and evolution of teeth

Teeth are unique to vertebrates and have played a central role in their evolution. The molecular pathways and morphogenetic processes involved in tooth development have been the focus of intense investigation over the past few decades, and the tooth is an important model system for many areas of research. Developmental biologists have exploited the clear distinction between the epithelium and the underlying mesenchyme during tooth development to elucidate reciprocal epithelial/mesenchymal interactions during organogenesis. The preservation of teeth in the fossil record makes these organs invaluable for the work of paleontologists, anthropologists, and evolutionary biologists. In addition, with the recent identification and characterization of dental stem cells, teeth have become of interest to the field of regenerative medicine. Here, we review the major research areas and studies in the development and evolution of teeth, including morphogenesis, genetics and signaling, evolution of tooth development, and dental stem cells.

Apoptotic signaling in mouse odontogenesis

Apoptosis is an important morphogenetic event in embryogenesis as well as during postnatal life. In the last 2 decades, apoptosis in tooth development (odontogenesis) has been investigated with gradually increasing focus on the mechanisms and signaling pathways involved. The molecular machinery responsible for apoptosis exhibits a high degree of conservation but also organ and tissue specific patterns. This review aims to discuss recent knowledge about apoptotic signaling networks during odontogenesis, concentrating on the mouse, which is often used as a model organism for human dentistry. Apoptosis accompanies the entire development of the tooth and corresponding remodeling of the surrounding bony tissue. It is most evident in its role in the elimination of signaling centers within developing teeth, removal of vestigal tooth germs, and in odontoblast and ameloblast organization during tooth mineralization. Dental apoptosis is caspase dependent and proceeds via mitochondrial mediated cell death with possible amplification by Fas-FasL signaling modulated by Bcl-2 family members.

Regulation of tooth number by fine-tuning levels of receptor-tyrosine kinase signaling

Much of our knowledge about mammalian evolution comes from examination of dental fossils, because the highly calcified enamel that covers teeth causes them to be among the best-preserved organs. As mammals entered new ecological niches, many changes in tooth number occurred, presumably as adaptations to new diets. For example, in contrast to humans, who have two incisors in each dental quadrant, rodents only have one incisor per quadrant. The rodent incisor, because of its unusual morphogenesis and remarkable stem cell-based continuous growth, presents a quandary for evolutionary biologists, as its origin in the fossil record is difficult to trace, and the genetic regulation of incisor number remains a largely open question. Here, we studied a series of mice carrying mutations in sprouty genes, the protein products of which are antagonists of receptor-tyrosine kinase signaling. In sprouty loss-of-function mutants, splitting of gene expression domains and reduced apoptosis was associated with subdivision of the incisor primordium and a multiplication of its stem cell-containing regions. Interestingly, changes in sprouty gene dosage led to a graded change in incisor number, with progressive decreases in sprouty dosage leading to increasing numbers of teeth. Moreover, the independent development of two incisors in mutants with large decreases in sprouty dosage mimicked the likely condition of rodent ancestors. Together, our findings indicate that altering genetic dosage of an antagonist can recapitulate ancestral dental characters, and that tooth number can be progressively regulated by changing levels of activity of a single signal transduction pathway.

Molecular genetics of supernumerary tooth formation

Despite advances in the knowledge of tooth morphogenesis and differentiation, relatively little is known about the aetiology and molecular mechanisms underlying supernumerary tooth formation. A small number of supernumerary teeth may be a common developmental dental anomaly, while multiple supernumerary teeth usually have a genetic component and they are sometimes thought to represent a partial third dentition in humans. Mice, which are commonly used for studying tooth development, only exhibit one dentition, with very few mouse models exhibiting supernumerary teeth similar to those in humans. Inactivation of Apc or forced activation of Wnt/β(catenin signalling results in multiple supernumerary tooth formation in both humans and in mice, but the key genes in these pathways are not very clear. Analysis of other model systems with continuous tooth replacement or secondary tooth formation, such as fish, snake, lizard, and ferret, is providing insights into the molecular and cellular mechanisms underlying succesional tooth development, and will assist in the studies on supernumerary tooth formation in humans. This information, together with the advances in stem cell biology and tissue engineering, will pave ways for the tooth regeneration and tooth bioengineering.

Shh expression in a rudimentary tooth offers new insights into development of the mouse incisor

For teeth as for any organ, knowledge of normal development is essential for the proper interpretation of developmental anomalies in mutant mice. It is generally accepted that tooth formation is initiated with a single signaling center that, in the incisor region, is exclusively related to the development of the functional adult incisor. Here, using a unique combination of computer-aided three-dimensional reconstructions and whole mount in situ hybridization of mandibles from finely staged wild-type mouse embryos, we demonstrate that several Sonic hedgehog (Shh) expression domains sequentially appear in the lower incisor region during early development. In contrast to the single Shh expression domain that is widely assumed to be present in each lower incisor area at ED12.5-13.5, we identified two spatially distinct regions of Shh expression that appear in an anterior-posterior sequence during this period. The initial anterior, more superficially located Shh expression region represented the rudimentary (so-called deciduous) incisor, whereas only the later posterior deeper situated region corresponded to the prospective functional incisor. In the more advanced embryos, only this posterior Shh expression in the incisor bud was detectable as a precursor of the enamel knot. This study offers a new interpretation of published molecular data on the mouse incisor from initiation through ED13.5. We suggest that, as with Shh expression, other molecular data that have been ascribed to the progressive development of the mouse functional incisor at early stages, in fact, correspond to a rudimentary incisor whose development is aborted.

Lrp4: A novel modulator of extracellular signaling in craniofacial organogenesis

The low-density lipoprotein (LDL) receptor family is a large evolutionarily conserved group of transmembrane proteins. It has been shown that LDL receptor family members can also function as direct signal transducers or modulators for a broad range of cellular signaling pathways. We have identified a novel mode of signaling pathway integration/coordination that occurs outside cells during development that involves an LDL receptor family member. Physical interaction between an extracellular protein (Wise) that binds BMP ligands and an Lrp receptor (Lrp4) that modulates Wnt signaling, acts to link these two pathways. Mutations in either Wise or Lrp4 in mice produce multiple, but identical abnormalities in tooth development that are linked to alterations in BMP and Wnt signaling. Teeth, in common with many other organs, develop by a series of epithelial-mesenchymal interactions, orchestrated by multiple cell signaling pathways. In tooth development, Lrp4 is expressed exclusively in epithelial cells and Wise mainly in mesenchymal cells. Our hypothesis, based on the mutant phenotypes, cell signaling activity changes and biochemical interactions between Wise and Lrp4 proteins, is that Wise and Lrp4 together act as an extracellular mechanism of coordinating BMP and Wnt signaling activities in epithelial-mesenchymal cell communication during development.

Importance of region-specific epithelial rearrangements in mouse rugae development

Epithelial appendages on palatal rugae develop during mouse palatogenesis through epithelial thickening and pattern formation. Recently, the patterned formation of nine rugae was observed together with the specific expression patterns of Shh in rodents. However, no crucial evidence was found for a direct association between Shh expression and the distinct structural formation of rugae. In order to reveal possible relationships, we investigated the morphological changes of rugae and expression patterns of Shh directly by in vitro organ culture at embryonic day 13 (E13) for 2 days. To compare and examine the diverse growing aspects of the palate and rugae, we carefully observed the detailed morphogenesis, with cell proliferation of the rugae occurring between E13 and E14.5. After 2 days of cultivation at E13, DiI micro-injections revealed that the middle part of the palate, adjacent to the upper molar-forming region, contributed to the formation of the subsequent structure of rugae by extensive cell rearrangement and proliferation within the epithelium in the preferred anteroposterior direction. The results also defined the intimate relationship between Shh expression and rugae formation.

Wnt/β-catenin signaling in the dental mesenchyme regulates incisor development by regulating Bmp4

Loss- and gain-of function approaches modulating canonical Wnt/β-catenin activity have established a role for the Wnt/β-catenin pathway during tooth development. Here we show that Wnt/β-catenin signaling is required in the dental mesenchyme for normal incisor development, as locally restricted genetic inactivation of β-catenin results in a splitting of the incisor placode, giving rise to two incisors. Molecularly this is first associated with down-regulation of Bmp4 and subsequent splitting of the Shh domain at a subsequent stage. The latter phenotype can be mimicked by ectopic application of the BMP antagonist Noggin. Conditional genetic inactivation of Bmp4 in the mesenchyme reveals that mesenchymal BMP4 activity is required for maintenance of Shh expression in the dental ectoderm. Taken together our results indicate that β-catenin together with Lef1 and Tcf1 are required to activate Bmp4 expression in order to maintain Shh expression in the dental ectoderm. This provides a mechanism whereby the number of incisors arising from one placode can be varied through local alterations of a mesenchymal signaling circuit involving β-catenin, Lef1, Tcf1 and Bmp4.

Patterning by heritage in mouse molar row development

It is known from paleontology studies that two premolars have been lost during mouse evolution. During mouse mandible development, two bud-like structures transiently form that may represent rudimentary precursors of the lost premolars. However, the interpretation of these structures and their significance for mouse molar development are highly controversial because of a lack of molecular data. Here, we searched for typical tooth signaling centers in these two bud-like structures, and followed their fate using molecular markers, 3D reconstructions, and lineage tracing in vitro. Transient signaling centers were indeed found to be located at the tips of both the anterior and posterior rudimentary buds. These centers expressed a similar set of molecular markers as the "primary enamel knot" (pEK), the signaling center of the first molar (M1). These two transient signaling centers were sequentially patterned before and anterior to the M1 pEK. We also determined the dynamics of the M1 pEK, which, slightly later during development, spread up to the field formerly occupied by the posterior transient signaling center. It can be concluded that two rudimentary tooth buds initiate the sequential development of the mouse molars and these have previously been mistaken for early stages of M1 development. Although neither rudiment progresses to form an adult tooth, the posterior one merges with the adjacent M1, which may explain the anterior enlargement of the M1 during mouse family evolution. This study highlights how rudiments of lost structures can stay integrated and participate in morphogenesis of functional organs and help in understanding their evolution, as Darwin suspected long ago.

Multilevel complex interactions between genetic, epigenetic and environmental factors in the aetiology of anomalies of dental development

Dental anomalies are caused by complex interactions between genetic, epigenetic and environmental factors during the long process of dental development. This process is multifactorial, multilevel, multidimensional and progressive over time. In this paper the evidence from animal models and from human studies is integrated to outline the current position and to construct and evaluate models, as a basis for future work. Dental development is multilevel entailing molecular and cellular interactions which have macroscopic outcomes. It is multidimensional, requiring developments in the three spatial dimensions and the fourth dimension of time. It is progressive, occurring over a long period, yet with critical stages. The series of interactions involving multiple genetic signalling pathways are also influenced by extracellular factors. Interactions, gradients and spatial field effects of multiple genes, epigenetic and environmental factors all influence the development of individual teeth, groups of teeth and the dentition as a whole. The macroscopic, clinically visible result in humans is a complex unit of four different tooth types formed in morphogenetic fields, in which teeth within each field form directionally and erupt at different times, reflecting the spatio-temporal control of development. Even when a specific mutation of a single gene or one major environmental insult has been identified in a patient with a dental anomaly, detailed investigation of the phenotype often reveals variation between affected individuals in the same family, between dentitions in the same individual and even between different teeth in the same dentition. The same, or closely similar phenotypes, whether anomalies of tooth number or structure, may arise from different aetiologies: not only mutations in different genes but also environmental factors may result in similar phenotypes. Related to the action of a number of the developmental regulatory genes active in odontogenesis, in different tissues, mutations can result in syndromes of which dental anomalies are part. Disruption of the antagonistic balance between developmental regulatory genes, acting as activators or inhibitors can result in dental anomalies. There are critical stages in the development of the individual tooth germs and, if progression fails, the germ will not develop further or undergoes apoptosis. The reiterative signalling patterns over time during the sequential process of initiation and morphogenesis are reflected in the clinical association of anomalies of number, size and form and the proposed models. An initial step in future studies is to combine the genetic investigations with accurate recording and measurement of the phenotype. They also need to collate findings at each level and exploit the accurate definition of both human and murine phenotypes now possible.

The importance of signal pathway modulation in all aspects of tooth development

Most characteristics of tooth shape and pattern can be altered by modulating the signal pathways mediating epithelial-mesenchymal interactions in developing teeth. These regulatory signals function in complex networks, characterized by an abundance of activators or inhibitors. In addition, multiple specific inhibitors of all conserved signal pathways have been identified as modulators in tooth development. The number of teeth as well as molar cusp patterns can be modified by tinkering with several different signal pathways. The inhibition of any of the major conserved signal pathways in knockout mice leads to arrested tooth formation. On the other hand, the stimulation of the Wnt pathway in the oral epithelium in transgenic mice leads to abundant de novo tooth formation. The modulation of some of the signal pathways can rescue the development of vestigial tooth rudiments in the incisor and molar regions resulting in extra premolar-like teeth. The size and the degree of asymmetry of the continuously growing mouse incisor can be modulated by modifying the complex network of FGF, bone morphogenetic protein, and Activin signals, which regulate the proliferation and differentiation of epithelial stem cells. Follistatin, Sprouty, and Sostdc1 are important endogenous inhibitors antagonizing these pathways and they are also involved in regulation of enamel formation, and patterning of teeth in crown and root domains. All these findings support the hypothesis that the diversity of tooth types and dental patterns may have resulted from tinkering with the conserved signal pathways, organized into complex networks, during evolution.

Dental lamina as source of odontogenic stem cells: evolutionary origins and developmental control of tooth generation in gnathostomes

This study considers stem cells for odontogenic capability in biological tooth renewal in the broad context of gnathostome dentitions and the derivation of them from oral epithelium. The location of the developmental site and cell dynamics of the dental lamina are parameters of a possible source for odontogenic epithelial stem cells, but the phylogenetic history is not known. Understanding the phylogenetic basis for stem cell origins throughout continuous tooth renewal in basal jawed vertebrates is the ultimate objective of this study. The key to understanding the origin and location of stem cells in the development of the dentition is sequestration of stem cells locally for programmed tooth renewal. We suggest not only the initial pattern differences in each dentate field but local control subsequently for tooth renewal within each family. The role of the specialized odontogenic epithelium (odontogenic band) is considered as that in which the stem cells reside and become partitioned. These regulate time, position and shape in sequential tooth production. New histological data for chondrichthyan fish show first a thickening of the oral epithelium (odontogenic band). After this, all primary and successive teeth are only generated deep to the oral epithelium from a dental lamina. In contrast, in osteichthyan fish the first teeth develop directly within the odontogenic band. In addition, successors are initiated at each tooth site in the predecessor tooth germ (without a dental lamina). We suggest that stem cells specified for each tooth family are set up and located in intermediate cells between the outer and inner dental epithelia.

The LIM homeodomain transcription factors Lhx6 and Lhx7 are key regulators of mammalian dentition

Genes encoding LIM homeodomain transcription factors are implicated in cell type specification and differentiation during embryogenesis. Two closely related members of this family, Lhx6 and Lhx7, are expressed in the ectomesenchyme of the maxillary and mandibular processes and have been suggested to control patterning of the first branchial arch (BA1) and odontogenesis. However, mice homozygous for single mutations either have no cranial defects (Lhx6) or show only cleft palate (Lhx7). To reveal the potential redundant activities of Lhx6 and Lhx7 in cranial morphogenesis, we generated mice with all combinations of wild-type and mutant alleles. Double homozygous mice have characteristic defects of the cranial skeleton and die shortly after birth, most likely because of cleft palate. In addition, Lhx6/7 deficient embryos lack molar teeth. The absence of molars in double mutants is not due to patterning defects of BA1 but results from failure of specification of the molar mesenchyme. Despite molar agenesis, Lhx6/7-deficient animals have normal incisors which, in the maxilla, are flanked by a supernumerary pair of incisor-like teeth. Our experiments demonstrate that the redundant activities of the LIM homeodomain proteins Lhx6 and Lhx7 are critical for craniofacial development and patterning of mammalian dentition.

Revitalization of a diastemal tooth primordium in Spry2 null mice results from increased proliferation and decreased apoptosis

An understanding of the factors that promote or inhibit tooth development is essential for designing biological tooth replacements. The embryonic mouse dentition provides an ideal system for studying such factors because it consists of two types of tooth primordia. One type of primordium will go on to form a functional tooth, whereas the other initiates development but arrests at or before the bud stage. This developmental arrest contributes to the formation of the toothless mouse diastema. It is accompanied by the apoptosis of the rudimentary diastemal buds, which presumably results from the insufficient activity of anti-apoptotic signals such as fibroblast growth factors (FGFs). We have previously shown that the arrest of a rudimentary tooth bud can be rescued by inactivating Spry2, an antagonist of FGF signaling. Here, we studied the role of the epithelial cell death and proliferation in this process by comparing the development of a rudimentary diastemal tooth bud (R(2)) and the first molar in the mandibles of Spry2(-/-) and wild-type (WT) embryos using histological sections, image analysis and 3D reconstructions. In the WT R(2) at embryonic day 13.5, significantly increased apoptosis and decreased proliferation were found compared with the first molar. In contrast, increased levels of FGF signaling in Spry2(-/-) embryos led to significantly decreased apoptosis and increased proliferation in the R(2) bud. Consequently, the R(2) was involved in the formation of a supernumerary tooth primordium. Studies of the revitalization of rudimentary tooth primordia in mutant mice can help to lay the foundation for tooth regeneration by enhancing our knowledge of mechanisms that regulate tooth formation.

Tinkering with the inductive mesenchyme: Sostdc1 uncovers the role of dental mesenchyme in limiting tooth induction

Like epithelial organs in general, tooth development involves inductive crosstalk between the epithelium and the mesenchyme. Classically, the inductive potential for tooth formation is considered to reside in the mesenchyme during the visible morphogenesis of teeth, and dental mesenchyme can induce tooth formation even when combined with non-dental epithelium. Here, we have investigated induction of mouse incisors using Sostdc1 (ectodin), a putative antagonist of BMP signaling in the mesenchymal induction of teeth. Deletion of Sostdc1 leads to the full development of single extra incisors adjacent to the main incisors. We show that initially, Sostdc1 expression is limited to the mesenchyme, suggesting that dental mesenchyme may limit supernumerary tooth induction. We test this in wild-type incisors by minimizing the amount of mesenchymal tissue surrounding the incisor tooth germs prior to culture in vitro. The cultured teeth phenocopy the extra incisors phenotype of the Sostdc1-deficient mice. Furthermore, we show that minimizing the amount of dental mesenchyme in cultured Sostdc1-deficient incisors causes the formation of additional de novo incisors that resemble the successional incisor development that results from activated Wnt signaling. Finally, Noggin and Dkk1 prevent individually the formation of extra incisors, and we therefore suggest that inhibition of both BMP and Wnt signaling contributes to the inhibitory role of the dental mesenchyme. Considering the role of mesenchyme in tooth induction and the design of tissue engineering protocols, our work may have uncovered how delicate control of tissue quantities alone influences the outcome between induction and inhibition.

Primary cilia regulate Shh activity in the control of molar tooth number

Primary cilia mediate Hh signalling and mutations in their protein components affect Hh activity. We show that in mice mutant for a cilia intraflagellar transport (IFT) protein, IFT88/polaris, Shh activity is increased in the toothless diastema mesenchyme of the embryonic jaw primordia. This results in the formation of ectopic teeth in the diastema, mesial to the first molars. This phenotype is specific to loss of polaris activity in the mesenchyme since loss of Polaris in the epithelium has no detrimental affect on tooth development. To further confirm that upregulation of Shh activity is responsible for the ectopic tooth formation, we analysed mice mutant for Gas1, a Shh protein antagonist in diastema mesenchyme. Gas1 mutants also had ectopic diastema teeth and accompanying increased Shh activity. In this context, therefore, primary cilia exert a specific negative regulatory effect on Shh activity that functions to repress tooth formation and thus determine tooth number. Strikingly, the ectopic teeth adopt a size and shape characteristic of premolars, a tooth type that was lost in mice around 50-100 million years ago.

Lrp4 modulates extracellular integration of cell signaling pathways in development

The extent to which cell signaling is integrated outside the cell is not currently appreciated. We show that a member of the low-density receptor-related protein family, Lrp4 modulates and integrates Bmp and canonical Wnt signalling during tooth morphogenesis by binding the secreted Bmp antagonist protein Wise. Mouse mutants of Lrp4 and Wise exhibit identical tooth phenotypes that include supernumerary incisors and molars, and fused molars. We propose that the Lrp4/Wise interaction acts as an extracellular integrator of epithelial-mesenchymal cell signaling. Wise, secreted from mesenchyme cells binds to BMP's and also to Lrp4 that is expressed on epithelial cells. This binding then results in the modulation of Wnt activity in the epithelial cells. Thus in this context Wise acts as an extracellular signaling molecule linking two signaling pathways. We further show that a downstream mediator of this integration is the Shh signaling pathway.

Epithelial histogenesis during tooth development

This paper reviews the current understanding of the progressive changes mediating dental epithelial histogenesis as a basis for future collaborative studies. Tooth development involves morphogenesis, epithelial histogenesis and cell differentiation. The consecutive morphological stages of lamina, bud, cap and bell are also characterized by changes in epithelial histogenesis. Differential cell proliferation rates, apoptosis, and alterations in adhesion and shape lead to the positioning of groups of cells with different functions. During tooth histo-morphogenesis changes occur in basement membrane composition, expression of signalling molecules and the localization of cell surface components. Cell positional identity may be related to cell history. Another important parameter is cell plasticity. Independently of signalling molecules, which play a major role in inducing or modulating specific steps, cell-cell and cell-matrix interactions regulate the plasticity/rigidity of particular domains of the enamel organ. This involves specifying in space the differential growth and influences the progressive tooth morphogenesis by shaping the epithelial-mesenchymal junction. Deposition of a mineralized matrix determines the final shape of the crown. All data reviewed in this paper were investigated in the mouse.

A periodic pattern generator for dental diversity

Background

Periodic patterning of iterative structures is a fundamental process during embryonic organization and development. Studies have shown how gene networks are employed to pattern butterfly eyespots, fly bristles and vertebrate epithelial appendages such as teeth, feathers, hair and mammary glands. Despite knowledge of how these features are organized, little is known about how diversity in periodic patterning is generated in nature. We address this problem through the molecular analysis of oral jaw dental diversity in Lake Malawi cichlids, where closely related species exhibit from 1 to 20 rows of teeth, with total teeth counts ranging from around 10 to 700.

Results

We investigate the expression of conserved gene networks (involving bmp2, bmp4, eda, edar, fgf8, pax9, pitx2, runx2, shh and wnt7b) known to pattern iterative structures and teeth in other vertebrates. We show that spatiotemporal variation in expression pattern reflects adult morphological diversity among three closely related Malawi cichlid species. Combinatorial epithelial expression of pitx2 and shh appears to govern the competence both of initial tooth sites and future tooth rows. Epithelial wnt7b and mesenchymal eda are expressed in the inter-germ and inter-row regions, and likely regulate the spacing of these shh-positive units. Finally, we used chemical knockdown to demonstrate the fundamental role of hedgehog signalling and initial placode formation in the organization of the periodically patterned cichlid dental programme.

Conclusion

Coordinated patterns of gene expression differ among Malawi species and prefigure the future-ordered distribution of functional teeth of specific size and spacing. This variation in gene expression among species occurs early in the developmental programme for dental patterning. These data show how a complex multi-rowed vertebrate dentition is organized and how developmental tinkering of conserved gene networks during iterative pattern formation can impact upon the evolution of trophic novelty.

Mesenchyme is responsible for tooth suppression in the mouse lower diastema

Between the incisor and molars in each dental quadrant, mice have a toothless gap (diastema) that may contain vestigial tooth primordia. It is still not clear whether suppression of odontogenesis in the mouse lower diastema can be attributed to epithelium, mesenchyme, or both. Therefore, using recombination experiments with mouse tissues from E11.5 and E13.5 stages, we investigated whether the epithelium or mesenchyme is responsible for the suppression of odontogenesis. Five groups of recombinants were established and cultured under mouse kidney capsules. The results demonstrated that at E11.5, the lower diastemal epithelium and mesenchyme possessed odontogenic potential and competence, respectively; at E13.5, both the lower diastemal epithelium and mesenchyme had odontogenic competence, while the lower diastemal mesenchyme did not possess odontogenic potential. On the basis of comparison of the odontogenic capabilities between the lower diastemal and molar tooth primordia, we conclude that mesenchyme is responsible for tooth regression in the mouse lower diastema.