Periodontal ligament stem/progenitor cells with protein-releasing scaffolds for cementum formation and integration on dentin surface

Exploring the Efficacy of Novel Therapeutic Strategies for Periodontitis: A Literature Review

Periodontitis, a prevalent oral condition, is facing difficulties in therapeutic approaches, sometimes leading to failure. This literature review was conducted to investigate the diversity of other therapeutic approaches and their potential contributions to the successful management of the disease. This research scrutinized the alterations in microbial diversity and imbalances in crucial microbial species, which contribute significantly to the pathogenesis of periodontitis. Within the limitations of this study, we highlight the importance of understanding the treatment plan's role in periodontitis disease, opening the way for further research and innovative treatment plans to mitigate the impact of periodontitis on oral health. This will aid both healthcare professionals and patients in preventing and effectively treating periodontitis, ultimately improving oral health outcomes and overall systemic health and well-being.

The 3-dimensional printing for dental tissue regeneration: the state of the art and future challenges

Tooth loss or damage poses great threaten to oral and general health. While contemporary clinical treatments have enabled tooth restoration to a certain extent, achieving functional tooth regeneration remains a challenging task due to the intricate and hierarchically organized architecture of teeth. The past few decades have seen a rapid development of three-dimensional (3D) printing technology, which has provided new breakthroughs in the field of tissue engineering and regenerative dentistry. This review outlined the bioactive materials and stem/progenitor cells used in dental regeneration, summarized recent advancements in the application of 3D printing technology for tooth and tooth-supporting tissue regeneration, including dental pulp, dentin, periodontal ligament, alveolar bone and so on. It also discussed current obstacles and potential future directions, aiming to inspire innovative ideas and encourage further development in regenerative medicine.

Resveratrol modulates the inflammatory response in hPDLSCs via the NRF2/HO-1 and NF-κB pathways and promotes osteogenic differentiation

OBJECTIVE

The purpose of this study was to investigate resveratrol's specific role as an anti-inflammatory and osteogenic differentiation of hPDLSCs in periodontitis and to reveal the mechanisms involved.

BACKGROUND

Numerous studies have shown that inhibiting the inflammatory response of periodontal tissues and promoting the regeneration of alveolar bone are crucial treatments for periodontitis. Resveratrol has been found to have certain anti-inflammatory property. However, the anti-inflammatory mechanism and osteogenic effect of resveratrol in periodontitis are poorly understood.

MATERIALS AND METHODS

We constructed an in vitro periodontitis model by LPS stimulation of hPDLSCs and performed WB, RT-qPCR, and immunofluorescence to analyze inflammatory factors and related pathways. In addition, we explored the osteogenic ability of resveratrol in in vitro models.

RESULTS

In vitro, resveratrol ameliorated the inflammatory response associated with activation of the NF-κB pathway through activation of the NRF2/HO-1 pathway, characterized by inhibition of p65/p50 nuclear translocation and the proinflammatory cytokines interleukin-1β levels. Resveratrol also has a positive effect on osteogenic differentiation.

CONCLUSIONS

Observations suggest that resveratrol modulates the inflammatory response in hPDLSCs via the NRF2/HO-1 and NF-κB pathways and promotes osteogenic differentiation.

Photobiomodulation Effects on Periodontal Ligament Stem Cells: A Systematic Review of In Vitro Studies

BACKGROUND

Stem cell therapy has been considered to play a paramount role in the treatment modalities available for regenerative dentistry. The established beneficial effects of photobiomodulation (PBM) at the cellular level have led to the combined use of these two factors (PBM and stem cells). The main goal of this study was firstly to critically appraise the effects of PBM on periodontal ligament stem cells (PDLSCs), and secondly to explore the most effective PBM protocols applied.

METHODS

Pubmed, Cochrane, Scopus, Science Direct, and Google Scholar search engines were used to identify experimental in vitro studies in which PBM was applied to cultured PDLSCs. After applying specific keywords, additional filters, and inclusion/exclusion criteria, a preliminary number of 245 articles were narrowed down to 11 in which lasers and LEDs were used within the 630 - 1064 nm wavelength range. Selected articles were further assessed by three independent reviewers for strict compliance with PRISMA guidelines, and a modified Cochrane risk of bias to determine eligibility.

STATISTICAL ANALYSIS

The dataset analysed was extracted from the studies with sufficient and clearly presented PBM protocols. Simple univariate regression analysis was performed to explore the significance of contributions of potential quantitative predictor variables toward study outcomes, and a one-way ANOVA model was employed for testing differences between the laser or LED sources of the treatments. The significance level for testing was set at α = 0.05.

RESULTS

The proliferation rate, osteogenic differentiation, and expression of different indicative genes for osteogenesis and inflammation suppression were found to be positively affected by the application of various types of lasers and LEDs. With regard to the PBM protocol, only the wavelength variable appeared to affect the treatment outcome; indeed, the 940 nm wavelength parameter was found not to exert a favourable effect.

CONCLUSIONS

Photobiomodulation can enhance the stemness and differentiation capacities of periodontal ligament stem cells. Therefore, for PBM protocols, there remains no consensus amongst the scientific community. Statistical analyses performed here indicated that the employment of a near-infrared (NIR) wavelength of 940 nm may not yield a significant favourable outcome, although those within the 630 - 830 nm range did so. Concerning the fluence, it should not exceed 8 J/cm2 when therapy is applied by LED devices, and 4 J/cm2 when applied by lasers, respectively.

Biopolymers and Their Application in Bioprinting Processes for Dental Tissue Engineering

Dental tissues are composed of multiple tissues with complex organization, such as dentin, gingiva, periodontal ligament, and alveolar bone. These tissues have different mechanical and biological properties that are essential for their functions. Therefore, dental diseases and injuries pose significant challenges for restorative dentistry, as they require innovative strategies to regenerate damaged or missing dental tissues. Biomimetic bioconstructs that can effectively integrate with native tissues and restore their functionalities are desirable for dental tissue regeneration. However, fabricating such bioconstructs is challenging due to the diversity and complexity of dental tissues. This review provides a comprehensive overview of the recent developments in polymer-based tissue engineering and three-dimensional (3D) printing technologies for dental tissue regeneration. It also discusses the current state-of-the-art, focusing on key techniques, such as polymeric biomaterials and 3D printing with or without cells, used in tissue engineering for dental tissues. Moreover, the final section of this paper identifies the challenges and future directions of this promising research field.

Bone formation ability of Gli1+ cells in the periodontal ligament after tooth extraction

During the process of socket healing after tooth extraction, osteoblasts appear in the tooth socket and form alveolar bone; however, the source of these osteoblasts is still uncertain. Recently, it has been demonstrated that cells expressing Gli1, a downstream factor of sonic hedgehog signaling, exhibit stem cell properties in the periodontal ligament (PDL). Therefore, in the present study, the differentiation ability of Gli1⁺-PDL cells after tooth extraction was analyzed using Gli1-Cre^ERT2/ROSA26-loxP-stop-loxP-tdTomato (iGli1/Tomato) mice. After the final administration of tamoxifen to iGli1/Tomato mice, Gli1/Tomato⁺ cells were rarely detected in the PDL. One day after the tooth extraction, although inflammatory cells appeared in the tooth socket, Periostin⁺ PDL-like tissues having a few Gli1/Tomato⁺ cells remained near the alveolar bone. Three days after the extraction, the number of Gli1/Tomato⁺ cells increased as evidenced by numerous PCNA⁺ cells in the socket. Some of these Gli1/Tomato⁺ cells expressed BMP4 and Phosphorylated (P)-Smad1/5/8. After seven days, the Osteopontin⁺ bone matrix was formed in the tooth socket apart from the alveolar bone. Many Gli1/Tomato⁺ osteoblasts that were positive for Runx2⁺ were arranged on the surface of the newly formed bone matrix. In the absence of Gli1⁺-PDL cells in Gli1-Cre^ERT2/Rosa26-loxP-stop-loxP-tdDTA (iGli1/DTA) mice, the amount of newly formed bone matrix was significantly reduced in the tooth socket. Therefore, these results collectively suggest that Gli1⁺-PDL cells differentiate into osteoblasts to form the bone matrix in the tooth socket; thus, this differentiation might be regulated, at least in part, by bone morphogenetic protein (BMP) signaling.

Loss of β-catenin causes cementum hypoplasia by hampering cementogenic differentiation of Axin2-expressing cells

BACKGROUND AND OBJECTIVE

Although cementum plays an essential role in tooth attachment and adaptation to occlusal force, the regulatory mechanisms of cementogenesis remain largely unknown. We have previously reported that Axin2-expressing (Axin2⁺ ) mesenchymal cells in periodontal ligament (PDL) are the main cell source for cementum growth, and constitutive activation of Wnt/β-catenin signaling in Axin2⁺ cells results in hypercementosis. Therefore, the aim of the present study was to further evaluate the effects of β-catenin deletion in Axin2⁺ cells on cementogenesis.

MATERIALS AND METHODS

We generated triple transgenic mice to conditionally delete β-catenin in Axin2-lineage cells by crossing Axin2^CreERT2/+ ; R26R^tdTomato/+ mice with β-catenin^flox/flox mice. Multiple approaches, including X-ray analysis, micro-CT, histological stainings, and immunostaining assays, were used to analyze cementum phenotypes and molecular mechanisms.

RESULTS

Our data revealed that loss of β-catenin in Axin2⁺ cells led to a cementum hypoplasia phenotype characterized by a sharp reduction in the formation of both acellular and cellular cementum. Mechanistically, we found that conditional removal of β-catenin in Axin2⁺ cells severely impaired the secretion of cementum matrix proteins, for example, bone sialoprotein (BSP), dentin matrix protein 1 (DMP1) and osteopontin (OPN), and markedly inhibited the differentiation of Axin2⁺ mesenchymal cells into osterix⁺ cementoblasts.

CONCLUSIONS

Our findings confirm the vital role of Axin2⁺ mesenchymal PDL cells in cementum growth and demonstrate that Wnt/β-catenin signaling shows a positive correlation with cementogenic differentiation of Axin2⁺ cells.

3D bioprinting and its innovative approach for biomedical applications

3D bioprinting or additive manufacturing is an emerging innovative technology revolutionizing the field of biomedical applications by combining engineering, manufacturing, art, education, and medicine. This process involved incorporating the cells with biocompatible materials to design the required tissue or organ model in situ for various in vivo applications. Conventional 3D printing is involved in constructing the model without incorporating any living components, thereby limiting its use in several recent biological applications. However, this uses additional biological complexities, including material choice, cell types, and their growth and differentiation factors. This state-of-the-art technology consciously summarizes different methods used in bioprinting and their importance and setbacks. It also elaborates on the concept of bioinks and their utility. Biomedical applications such as cancer therapy, tissue engineering, bone regeneration, and wound healing involving 3D printing have gained much attention in recent years. This article aims to provide a comprehensive review of all the aspects associated with 3D bioprinting, from material selection, technology, and fabrication to applications in the biomedical fields. Attempts have been made to highlight each element in detail, along with the associated available reports from recent literature. This review focuses on providing a single platform for cancer and tissue engineering applications associated with 3D bioprinting in the biomedical field.

The current regenerative medicine approaches of craniofacial diseases: A narrative review

Craniofacial deformities (CFDs) develop following oncological resection, trauma, or congenital disorders. Trauma is one of the top five causes of death globally, with rates varying from country to country. They result in a non-healing composite tissue wound as they degenerate in soft or hard tissues. Approximately one-third of oral diseases are caused by gum disease. Due to the complexity of anatomical structures in the region and the variety of tissue-specific requirements, CFD treatments present many challenges. Many treatment methods for CFDs are available today, such as drugs, regenerative medicine (RM), surgery, and tissue engineering. Functional restoration of a tissue or an organ after trauma or other chronic diseases is the focus of this emerging field of science. The materials and methodologies used in craniofacial reconstruction have significantly improved in the last few years. A facial fracture requires bone preservation as much as possible, so tiny fragments are removed initially. It is possible to replace bone marrow stem cells with oral stem cells for CFDs due to their excellent potential for bone formation. This review article discusses regenerative approaches for different types of craniofacial diseases.

Differentiation ability of Gli1+ cells during orthodontic tooth movement

Orthodontic tooth movement (OTM) induces bone formation on the alveolar bone of the tension side; however, the mechanism of osteoblast differentiation is not fully understood. Gli1 is an essential transcription factor for hedgehog signaling and functions in undifferentiated cells during embryogenesis. In this study, we examined the differentiation of Gli1⁺ cells in the periodontal ligament (PDL) during OTM using a lineage-tracing analysis. After the final administration of tamoxifen for 2 days to 8-week-old Gli1-Cre^ERT2/ROSA26-loxP-stop-loxP-tdTomato (iGli1/Tomato) mice, Gli1/Tomato⁺ cells were rarely observed near endomucin⁺ blood vessels in the PDL. Osteoblasts lining the alveolar bone did not exhibit Gli1/Tomato fluorescence. To move the first molar of iGli1/Tomato mice medially, nickel-titanium closed-coil springs were attached between the upper anterior alveolar bone and the first molar. Two days after OTM initiation, the number of Gli1/Tomato⁺ cells increased along with numerous PCNA⁺ cells in the PDL of the tension side. As some Gli1/Tomato⁺ cells exhibited positive expression of osterix, an osteoblast differentiation marker, Gli1⁺ cells probably differentiated into osteoblast progenitor cells. On day 10, the newly formed bone labeled by calcein administration during OTM was detected on the surface of the original alveolar bone of the tension side. Gli1/Tomato⁺ cells expressing osterix localized to the surface of the newly formed bone. In contrast, in the PDL of the compression side, Gli1/Tomato⁺ cells proliferated before day 10 and expressed type I collagen, suggesting that the Gli1⁺ cells also differentiated into fibroblasts. Collectively, these results demonstrate that Gli1⁺ cells in the PDL can differentiate into osteoblasts at the tension side and may function in bone remodeling as well as fibril formation in the PDL during OTM.

Periodontal ligament stem cell-based bioactive constructs for bone tissue engineering

Objectives: Stem cell-based tissue engineering approaches are promising for bone repair and regeneration. Periodontal ligament stem cells (PDLSCs) are a promising cell source for tissue engineering, especially for maxillofacial bone and periodontal regeneration. Many studies have shown potent results via PDLSCs in bone regeneration. In this review, we describe recent cutting-edge researches on PDLSC-based bone regeneration and periodontal tissue regeneration. Data and sources: An extensive search of the literature for papers related to PDLSCs-based bioactive constructs for bone tissue engineering was made on the databases of PubMed, Medline and Google Scholar. The papers were selected by three independent calibrated reviewers. Results: Multiple types of materials and scaffolds have been combined with PDLSCs, involving xeno genic bone graft, calcium phosphate materials and polymers. These PDLSC-based constructs exhibit the potential for bone and periodontal tissue regeneration. In addition, various osteo inductive agents and strategies have been applied with PDLSCs, including drugs, biologics, gene therapy, physical stimulation, scaffold modification, cell sheets and co-culture. Conclusoin: This review article demonstrates the great potential of PDLSCs-based bioactive constructs as a promising approach for bone and periodontal tissue regeneration.

Challenges of Periodontal Tissue Engineering: Increasing Biomimicry through 3D Printing and Controlled Dynamic Environment

In recent years, tissue engineering studies have proposed several approaches to regenerate periodontium based on the use of three-dimensional (3D) tissue scaffolds alone or in association with periodontal ligament stem cells (PDLSCs). The rapid evolution of bioprinting has sped up classic regenerative medicine, making the fabrication of multilayered scaffolds-which are essential in targeting the periodontal ligament (PDL)-conceivable. Physiological mechanical loading is fundamental to generate this complex anatomical structure ex vivo. Indeed, loading induces the correct orientation of the fibers forming the PDL and maintains tissue homeostasis, whereas overloading or a failure to adapt to mechanical load can be at least in part responsible for a wrong tissue regeneration using PDLSCs. This review provides a brief overview of the most recent achievements in periodontal tissue engineering, with a particular focus on the use of PDLSCs, which are the best choice for regenerating PDL as well as alveolar bone and cementum. Different scaffolds associated with various manufacturing methods and data derived from the application of different mechanical loading protocols have been analyzed, demonstrating that periodontal tissue engineering represents a proof of concept with high potential for innovative therapies in the near future.

Stem cell homing in periodontal tissue regeneration

The destruction of periodontal tissue is a crucial problem faced by oral diseases, such as periodontitis and tooth avulsion. However, regenerating periodontal tissue is a huge clinical challenge because of the structural complexity and the poor self-healing capability of periodontal tissue. Tissue engineering has led to advances in periodontal regeneration, however, the source of exogenous seed cells is still a major obstacle. With the improvement of in situ tissue engineering and the exploration of stem cell niches, the homing of endogenous stem cells may bring promising treatment strategies in the future. In recent years, the applications of endogenous cell homing have been widely reported in clinical tissue repair, periodontal regeneration, and cell therapy prospects. Stimulating strategies have also been widely studied, such as the combination of cytokines and chemokines, and the implantation of tissue-engineered scaffolds. In the future, more research needs to be done to improve the efficiency of endogenous cell homing and expand the range of clinical applications.

3D Printed and Bioprinted Membranes and Scaffolds for the Periodontal Tissue Regeneration: A Narrative Review

Numerous technologies and materials were developed with the aim of repairing and reconstructing the tissue loss in patients with periodontitis. Periodontal guided bone regeneration (GBR) and guided tissue regeneration (GTR) involves the use of a membrane which prevents epithelial cell migration, and helps to maintain the space, creating a protected area in which tissue regeneration is favored. Over the time, manufacturing procedures of such barrier membranes followed important improvements. Three-dimensional (3D) printing technology has led to major innovations in periodontal regeneration methods, using technologies such as inkjet printing, light-assisted 3D printing or micro-extrusion. Besides the 3D printing of monophasic and multi-phasic scaffolds, bioprinting and tissue engineering have emerged as innovative technologies which can change the way we see GTR and GBR.

Fibre-guiding biphasic scaffold for perpendicular periodontal ligament attachment

Periodontal regeneration is characterized by the attachment of oblique periodontal ligament fibres on the tooth root surface. To facilitate periodontal ligament attachment, a fibre-guiding tissue engineered biphasic construct was manufactured by melt electrowriting (MEW) for influencing reproducible cell guidance and tissue orientation. The biphasic scaffold contained fibre-guiding features in the periodontal ligament component comprising of 100 µm spaced channels (100CH), a pore size gradient in the bone component and maintained a highly porous and fully interconnected interface between the compartments. The efficacy of the fibre-guiding channels was assessed in an ectopic periodontal attachment model in immunocompromised rats. This demonstrated an unprecedented and systematic tissue alignment perpendicular to the dentin in the 100CH group, resulting in the close mimicry of native periodontal ligament architecture. In addition, the histology revealed high levels of tissue integration between the two compartments as observed by the perpendicular collagen attachment on the dentin surface, which also extended and infiltrated the scaffold's bone compartment. In conclusion, the 100 µm fibre-guiding scaffold induced a systematic tissue orientation at the dentin-ligament interface, resembling the native periodontium and thus resulting in enhanced alignment mimicking periodontal ligament regeneration. STATEMENT OF SIGNIFICANCE: Periodontitis is a prevalent inflammatory disease affecting a large portion of the adult population and leading to the destruction of the tooth-supporting structures (alveolar bone, periodontal ligament, and cementum). Current surgical treatments are unpredictable and generally result in repair rather than functional regeneration. A key feature of functional regeneration is the re-insertion of the oblique or perpendicularly orientated periodontal ligament fibre in both the alveolar bone and root surface. This study demonstrates that a highly porous scaffold featuring 100 µm width channels manufactured by the stacking of melt electrospun fibres, induced perpendicular alignment and attachment of the neo-ligament onto a dentine surface. The fibre guiding micro-architecture may pave the way for enhanced and more functional regeneration of the periodontium.

Challenges and tissue engineering strategies of periodontal guided tissue regeneration

Periodontitis is a chronic infectious oral disease with a high prevalence rate in the world, and is a major cause of tooth loss. Nowadays, people have realized that the local microenvironment that includes proteins, cytokines, and extracellular matrix has a key influence on the functions of host immune cells and periodontal ligament stem cells during a chronic infectious disease such as periodontitis. The above pathological process of periodontitis will lead to a defect of periodontal tissues. Through the application of biomaterials, biological agents, and stem cells therapy, guided tissue regeneration (GTR) makes it possible to reconstruct healthy periodontal ligament tissue after local inflammation control. To date, substantial advances have been made in periodontal guided tissue regeneration. However, the process of periodontal remodeling experiences complex microenvironment changes, and currently periodontium regeneration still remains to be a challenging feat. In this review, we summarized the main challenges in each stage of periodontal regeneration, and try to put forward appropriate biomaterial treatment mechanisms or potential tissue engineering strategies that provide a theoretical basis for periodontal tissue engineering regeneration research.

Gli1+-PDL Cells Contribute to Alveolar Bone Homeostasis and Regeneration

The periodontal ligament (PDL) contains mesenchymal stem cells (MSCs) that can differentiate into osteoblasts, cementoblasts, and fibroblasts. Nevertheless, the distribution and characteristics of these cells remain uncertain. Gli1, an essential hedgehog signaling transcription factor, functions in undifferentiated cells during embryogenesis. Therefore, in the present study, the differentiation ability of Gli1⁺ cells was examined using Gli1-CreERT2/ROSA26-loxP-stop-loxP-tdTomato (iGli1/Tomato) mice. In 4-wk-old iGli1/Tomato mice, Gli1/Tomato⁺ cells were only slightly detected in the PDL, around endomucin-expressing blood vessels. These cells had proliferated over time, localizing in the PDL as well as on the bone and cementum surfaces at day 28. However, in 8-wk-old iGli1/Tomato mice, Gli1/Tomato⁺ cells were quiescent, as most cells were not immunoreactive for Ki-67. These cells in 8-wk-old mice exhibited high colony-forming unit fibroblast activity and were capable of osteogenic, chondrogenic, and adipogenic differentiation in vitro. In addition, after transplantation of teeth of iGli1/Tomato mice into the hypodermis of wild-type mice, Tomato fluorescence indicating the progeny of Gli1⁺ cells was detected in the osteoblasts and osteocytes of the regenerated bone. These results demonstrate that Gli1⁺ cells in the PDL were MSCs and could contribute to the alveolar bone regeneration.

Fucoidan (Undaria pinnatifida)/Polydopamine Composite-Modified Surface Promotes Osteogenic Potential of Periodontal Ligament Stem Cells

Fucoidan, a marine-sulfated polysaccharide derived from brown algae, has been recently spotlighted as a natural biomaterial for use in bone formation and regeneration. Current research explores the osteoinductive and osteoconductive properties of fucoidan-based composites for bone tissue engineering applications. The utility of fucoidan in a bone tissue regeneration environment necessitates a better understanding of how fucoidan regulates osteogenic processes at the molecular level. Therefore, this study designed a fucoidan and polydopamine (PDA) composite-based film for use in a culture platform for periodontal ligament stem cells (PDLSCs) and explored the prominent molecular pathways induced during osteogenic differentiation of PDLSCs through transcriptome profiling. Characterization of the fucoidan/PDA-coated culture polystyrene surface was assessed by scanning electron microscopy and X-ray photoelectron spectroscopy. The osteogenic differentiation of the PDLSCs cultured on the fucoidan/PDA composite was examined through alkaline phosphatase activity, intracellular calcium levels, matrix mineralization assay, and analysis of the mRNA and protein expression of osteogenic markers. RNA sequencing was performed to identify significantly enriched and associated molecular networks. The culture of PDLSCs on the fucoidan/PDA composite demonstrated higher osteogenic potency than that on the control surface. Differentially expressed genes (DEGs) (n = 348) were identified during fucoidan/PDA-induced osteogenic differentiation by RNA sequencing. The signaling pathways enriched in the DEGs include regulation of the actin cytoskeleton and Ras-related protein 1 and phosphatidylinositol signaling. These pathways represent cell adhesion and cytoskeleton organization functions that are significantly involved in the osteogenic process. These results suggest that a fucoidan/PDA composite promotes the osteogenic potential of PDLSCs by activation of critical molecular pathways.

A hierarchical bilayer architecture for complex tissue regeneration

Engineering a complete, physiologically functional, periodontal complex structure remains a great clinical challenge due to the highly hierarchical architecture of the periodontium and coordinated regulation of multiple growth factors required to induce stem cell multilineage differentiation. Using biomimetic self-assembly and microstamping techniques, we construct a hierarchical bilayer architecture consisting of intrafibrillarly mineralized collagen resembling bone and cementum, and unmineralized parallel-aligned fibrils mimicking periodontal ligament. The prepared biphasic scaffold possesses unique micro/nano structure, differential mechanical properties, and growth factor-rich microenvironment between the two phases, realizing a perfect simulation of natural periodontal hard/soft tissue interface. The interconnected porous hard compartment with a Young's modulus of 1409.00 ± 160.83 MPa could induce cross-arrangement and osteogenic differentiation of stem cells in vitro, whereas the micropatterned soft compartment with a Young's modulus of 42.62 ± 4.58 MPa containing abundant endogenous growth factors, could guide parallel arrangement and fibrogenic differentiation of stem cells in vitro. After implantation in critical-sized complete periodontal tissue defect, the biomimetic bilayer architecture potently reconstructs native periodontium with the insertion of periodontal ligament fibers into newly formed cementum and alveolar bone by recruiting host mesenchymal stem cells and activating the transforming growth factor beta 1/Smad3 signaling pathway. Taken together, integration of self-assembly and microstamping strategies could successfully fabricate a hierarchical bilayer architecture, which exhibits great potential for recruiting and regulating host stem cells to promote synergistic regeneration of hard/soft tissues.

Application of dental stem cells in three-dimensional tissue regeneration

Dental stem cells can differentiate into different types of cells. Dental pulp stem cells, stem cells from human exfoliated deciduous teeth, periodontal ligament stem cells, stem cells from apical papilla, and dental follicle progenitor cells are five different types of dental stem cells that have been identified during different stages of tooth development. The availability of dental stem cells from discarded or removed teeth makes them promising candidates for tissue engineering. In recent years, three-dimensional (3D) tissue scaffolds have been used to reconstruct and restore different anatomical defects. With rapid advances in 3D tissue engineering, dental stem cells have been used in the regeneration of 3D engineered tissue. This review presents an overview of different types of dental stem cells used in 3D tissue regeneration, which are currently the most common type of stem cells used to treat human tissue conditions.

Identification of stemness and differentially expressed genes in human cementum-derived cells

Purpose

Periodontal treatment aims at complete regeneration of the periodontium, and developing strategies for periodontal regeneration requires a deep understanding of the tissues composing the periodontium. In the present study, the stemness characteristics and gene expression profiles of cementum-derived cells (CDCs) were investigated and compared with previously established human stem cells. Candidate marker proteins for CDCs were also explored.

Methods

Periodontal ligament stem cells (PDLSCs), pulp stem cells (PULPSCs), and CDCs were isolated and cultured from extracted human mandibular third molars. Human bone marrow stem cells (BMSCs) were used as a positive control. To identify the stemness of CDCs, cell differentiation (osteogenic, adipogenic, and chondrogenic) and surface antigens were evaluated through flow cytometry. The expression of cementum protein 1 (CEMP1) and cementum attachment protein (CAP) was investigated to explore marker proteins for CDCs through reverse-transcription polymerase chain reaction. To compare the gene expression profiles of the 4 cell types, mRNA and miRNA microarray analysis of 10 samples of BMSCs (n=1), PDLSCs (n=3), PULPSCs (n=3), and CDCs (n=3) were performed.

Results

The expression of mesenchymal stem cell markers with a concomitant absence of hematopoietic markers was observed in PDLSCs, PULPSCs, CDCs and BMSCs. All 4 cell populations also showed differentiation into osteogenic, adipogenic, and chondrogenic lineages. CEMP1 was strongly expressed in CDCs, while it was weakly detected in the other 3 cell populations. Meanwhile, CAP was not found in any of the 4 cell populations. The mRNA and miRNA microarray analysis showed that 14 mRNA genes and 4 miRNA genes were differentially expressed in CDCs vs. PDLSCs and PULPSCs.

Conclusions

Within the limitations of the study, CDCs seem to have stemness and preferentially express CEMP1. Moreover, there were several up- or down-regulated genes in CDCs vs. PDLSCs, PULPSCs, and BMSCs and these genes could be candidate marker proteins of CDCs.

The recent advances in scaffolds for integrated periodontal regeneration

The periodontium is an integrated, functional unit of multiple tissues surrounding and supporting the tooth, including but not limited to cementum (CM), periodontal ligament (PDL) and alveolar bone (AB). Periodontal tissues can be destructed by chronic periodontal disease, which can lead to tooth loss. In support of the treatment for periodontally diseased tooth, various biomaterials have been applied starting as a contact inhibition membrane in the guided tissue regeneration (GTR) that is the current gold standard in dental clinic. Recently, various biomaterials have been prepared in a form of tissue engineering scaffold to facilitate the regeneration of damaged periodontal tissues. From a physical substrate to support healing of a single type of periodontal tissue to multi-phase/bioactive scaffold system to guide an integrated regeneration of periodontium, technologies for scaffold fabrication have emerged in last years. This review covers the recent advancements in development of scaffolds designed for periodontal tissue regeneration and their efficacy tested in vitro and in vivo. Pros and Cons of different biomaterials and design parameters implemented for periodontal tissue regeneration are also discussed, including future perspectives.

Elements of 3D Bioprinting in Periodontal Regeneration: Frontiers and Prospects

Periodontitis is a chronic infectious disease worldwide, caused by the accumulation of bacterial plaque, which can lead to the destruction of periodontal supporting tissue and eventually tooth loss. The goal of periodontal treatment is to remove pathogenic factors and control the periodontal inflammation. However, the complete regeneration of periodontal supporting tissue is still a major challenge according to current technology. Tissue engineering recovers the injured tissue through seed cells, bio-capable scaffold and bioactive factors. Three-D-bioprinting is an emerging technology in regeneration medicine/tissue engineering, because of its high accuracy and high efficiency, providing a new strategy for periodontal regeneration. This article represents the materials of 3D bioprinting in periodontal regeneration from three aspects: oral seed cell, bio-scaffold and bio-active factors.

A simvastatin-releasing scaffold with periodontal ligament stem cell sheets for periodontal regeneration

Simvastatin (SIM) has been documented to induce the osteogenic differentiation of periodontal ligament stem cells (PDLSCs). To establish an efficient release system for periodontal regeneration, a polycaprolactone (PCL) membrane scaffold containing SIM was electrospun and evaluated. The obtained PCL-SIM membrane scaffold showed sustained release up to 28 days, without deleterious effect on proliferation of PDLSCs on the scaffolds. PDLSCs were seeded onto scaffolds and their osteogenic differentiation was evaluated. After 21 days, expressions of collagen type I, alkaline phosphatase and bone sialoprotein genes were significantly upregulated and mineralized matrix formation was increased on the PCL-SIM scaffolds compared with the PCL scaffolds. In a heterotopic periodontal regeneration model, a cell sheet-scaffold construct was assembled by placement of multilayers of PDLSC sheets on PCL or PCL-SIM scaffolds, and these were then placed between dentin and ceramic bovine bone for subcutaneous implantation in athymic mice. After 8 weeks, the PCL-SIM membrane showed formation of significantly more ectopic cementum-like mineral on the dentin surface. These findings demonstrated that the PCL-SIM membrane scaffold promotes cementum-like tissue formation by sustained drug release, suggesting the feasibility of its therapeutic use with PDLSC sheets to improve periodontal regeneration.

Maxillofacial-Derived Mesenchymal Stem Cells: Characteristics and Progress in Tissue Regeneration

Maxillofacial-derived mesenchymal stem cells (MFSCs) are a particular collective type of mesenchymal stem cells (MSCs) that originate from the hard and soft tissue of the maxillofacial region. Recently, many types of MFSCs have been isolated and characterized. MFSCs have the common characteristics of being extremely accessible and amazingly multipotent and thus have become a promising stem cell resource in tissue regeneration. However, different MFSCs can give rise to different cell lineages, have different advantages in clinical use, and regulate the immune and inflammation microenvironment through paracrine mechanisms in different ways. Hence, in this review, we will concentrate on the updated new findings of all types of MFSCs in tissue regeneration and also introduce the recently discovered types of MFSCs. Important issues about proliferation and differentiation in vitro and in vivo, up-to-date clinical application, and paracrine effect of MFSCs in tissue regeneration will also be discussed. Our review may provide a better guide for the clinical use of MFSCs and further direction of research in MFSC regeneration medicine.

Hard Dental Tissues Regeneration-Approaches and Challenges

With the development of the modern concept of tissue engineering approach and the discovery of the potential of stem cells in dentistry, the regeneration of hard dental tissues has become a reality and a priority of modern dentistry. The present review reports the recent advances on stem-cell based regeneration strategies for hard dental tissues and analyze the feasibility of stem cells and of growth factors in scaffolds-based or scaffold-free approaches in inducing the regeneration of either the whole tooth or only of its component structures.

Osteoinductive function of fucoidan on periodontal ligament stem cells: Role of PI3K/Akt and Wnt/β-catenin signaling pathways

BACKGROUND/OBJECTIVES

Fucoidan has been focused as a multifunctional therapeutic uses including bone health supplements. However, the critical molecular mechanisms of fucoidan for bone therapeutic agents have not been fully understood. We investigated the osteoinductive effect of fucoidan on periodontal ligament stem cells (PDLSCs) and how this polymer encouraged PDLSC osteogenesis.

MATERIALS AND METHODS

Osteogenic induction of PDLSCs was processed by culturing cells with fucoidan treatment. Osteogenic differentiation of PDLSCs was verified by alkaline phosphatase (ALP) activity, matrix mineralization assay, intracellular calcium levels, and mRNA expression and protein levels of osteogenic markers.

RESULTS

Fucoidan treatment showed higher osteogenic activity in the PDLSCs than the control groups. PDLSCs with fucoidan also presented increased levels of the phosphatidylinositol-3-kinase (PI3K) isoforms, p110α and p110γ compared to control cells. The phosphorylation of Akt, a PI3K downstream effector, was significantly increased at 90 min of fucoidan induction. Expression of β-catenin, a coactivator of canonical Wnt pathways, was increased in PDLSCs with fucoidan. β-catenin was found to link with PI3K activation during the fucoidan stimulation. When cells were blocked by PI3K inhibitor or β-catenin-specific siRNA, fucoidan-induced osteogenic activity of PDLSCs was significantly attenuated.

CONCLUSION

These findings suggest that the fucoidan stimulates osteogenic differentiation of PDLSCs via the PI3K/Akt and Wnt/β-catenin pathways.

Angiogenesis in Regenerative Dentistry: Are We Far Enough for Therapy?

Angiogenesis is a broad spread term of high interest in regenerative medicine and tissue engineering including the dental field. In the last two decades, researchers worldwide struggled to find the best ways to accelerate healing, stimulate soft, and hard tissue remodeling. Stem cells, growth factors, pathways, signals, receptors, genetics are just a few words that describe this area in medicine. Dental implants, bone and soft tissue regeneration using autologous grafts, or xenografts, allografts, their integration and acceptance rely on their material properties. However, the host response, through its vascularization, plays a significant role. The present paper aims to analyze and organize the latest information about the available dental stem cells, the types of growth factors with pro-angiogenic effect and the possible therapeutic effect of enhanced angiogenesis in regenerative dentistry.

Tissue Engineering and Three-Dimensional Printing in Periodontal Regeneration: A Literature Review

The three-dimensional printing of scaffolds is an interesting alternative to the traditional techniques of periodontal regeneration. This technique uses computer assisted design and manufacturing after CT scan. After 3D modelling, individualized scaffolds are printed by extrusion, selective laser sintering, stereolithography, or powder bed inkjet printing. These scaffolds can be made of one or several materials such as natural polymers, synthetic polymers, or bioceramics. They can be monophasic or multiphasic and tend to recreate the architectural structure of the periodontal tissue. In order to enhance the bioactivity and have a higher regeneration, the scaffolds can be embedded with stem cells and/or growth factors. This new technique could enhance a complete periodontal regeneration. This review summarizes the application of 3D printed scaffolds in periodontal regeneration. The process, the materials and designs, the key advantages and prospects of 3D bioprinting are highlighted, providing new ideas for tissue regeneration.

The composite sandwich structure of dNCPs polyelectrolyte multilayers induced the osteogenic differentiation of PDLSCs in vitro

This study reported about the fabrication of dentin non-collagenous proteins (dNCPs) polyelectrolyte multilayers and evaluated its osteogenic potential. The composite sandwich structure of dNCPs polyelectrolyte multilayers was generated on the surface of polycaprolactone electrospinning membranes by the Layer-by-Layer self-assembly technique. The dNCPs-coated membranes comprised the experimental group and the non-coated membranes acted as the control. Nanofiber morphologies of both membranes were observed under scanning electron microscope. The release of dNCPs was evaluated by ELISA kit. Periodontal ligament stem cells (PDLSCs) were seeded on both membranes. The morphology changes and proliferation of cells were tested. The expressions of osteogenic-related genes and proteins were evaluated by RT-PCR, alkaline phosphatase (ALP) activity assay, and immunofluorescence staining. dNCPs-coated membranes displayed significantly different fiber morphology than the non-coated membranes. A stable release of dentin phosphoprotein was maintained from day 4 to day 15 in the experimental group. Cells on dNCPs-coated membranes were found to have cuboidal or polygonal shapes. The proliferative rate of cells was significantly lower in the experimental group from day 4 to day 9 (p<0.05). However, cells on the dNCPs-coated membranes demonstrated a significantly higher ALP content and expression levels of osteogenic gene and proteins than the controls (p<0.05). These results indicated that dNCPs polyelectrolyte multilayers could induce the osteogenic differentiation of PDLSCs in vitro.

Effect of local anesthetics on viability and differentiation of various adult stem/progenitor cells

BACKGROUND

Local anesthetics (LAs) are widely used to control pain during various clinical treatments. One of the side effects of LAs, cytotoxicity, has been investigated in various cells including stem/progenitor cells. However, our understanding of the effects of LAs on the differentiation capacity of stem/progenitor cells still remains limited. Therefore, a comparative study was conducted to investigate the effects of multiple LAs on viability and multi-lineage differentiation of stem/progenitor cells that originated from various adult tissues.

METHOD

Multiple types of stem/progenitor cells, including bone marrow mesenchymal stem/progenitor cells (MSCs), dental pulp stem/progenitor cells (DPSCs), periodontal ligament stem/progenitor cells (PDLSCs), and tendon-derived stem/progenitor cells, were either obtained from a commercial provider or isolated from adult human donors. Lidocaine (LD) and bupivacaine (BP) at various doses (1×, 0.75×, 0.5×, and 0.25× of each physiological dose) were applied to the different stem/progenitor cells for an hour, followed by induction of fibrogenic, chondrogenic, osteogenic, and adipogenic differentiation. Live/dead and MTT assays were performed at 24 h after the LD or BP treatment. At 2 weeks, qRT-PCR was conducted to evaluate the gene expressions associated with differentiation. After 4 weeks, multiple biochemical staining was performed to evaluate matrix deposition.

RESULTS

At 24 h after LD or BP treatment, 1× and 0.75× physiological doses of LD and BP showed significant cytotoxicity in all the tested adult stem/progenitor cells. At 0.5×, BP resulted in higher viability than the same dose LD, with variance between cell types. Overall, the gene expressions associated with fibrogenic, chondrogenic, osteogenic, and adipogenic differentiation were attenuated in LD or BP pre-treated stem/progenitor cells, with notable dose-effect and dependence on types. In contrast, certain doses of LD and/or BP were found to increase specific gene expression, depending on the cell types.

CONCLUSION

Our data suggest that LAs such as LD and BP affect not only the viability but also the differentiation capacity of adult stem/progenitor cells from various anatomical sites. This study sheds light on stem cell applications for tissue regeneration in which isolation and transplantation of stem cells frequently involve LA administration.

Three-dimensional printing with biomaterials in craniofacial and dental tissue engineering

With the development of technology, tissue engineering (TE) has been widely applied in the medical field. In recent years, due to its accuracy and the demands of solid freeform fabrication in TE, three-dimensional printing, also known as additive manufacturing (AM), has been applied for biological scaffold fabrication in craniofacial and dental regeneration. In this review, we have compared several types of AM techniques and summarized their advantages and limitations. The range of printable materials used in craniofacial and dental tissue includes all the biomaterials. Thus, basic and clinical studies were discussed in this review to present the application of AM techniques in craniofacial and dental tissue and their advances during these years, which might provide information for further AM studies in craniofacial and dental TE.

Periodontal Tissue Engineering with a Multiphasic Construct and Cell Sheets

This study reports on scaffold-based periodontal tissue engineering in a large preclinical animal model. A biphasic scaffold consisting of bone and periodontal ligament compartments manufactured by melt and solution electrospinning, respectively, was used for the delivery of in vitro matured cell sheets from 3 sources: gingival cells (GCs), bone marrow-derived mesenchymal stromal cells (Bm-MSCs), and periodontal ligament cells (PDLCs). The construct featured a 3-dimensional fibrous bone compartment with macroscopic pore size, while the periodontal compartment consisted of a flexible porous membrane for cell sheet delivery. The regenerative performance of the constructs was radiographically and histologically assessed in surgically created periodontal defects in sheep following 5 and 10 wk of healing. Histologic observation demonstrated that the constructs maintained their shape and volume throughout the entirety of the in vivo study and were well integrated with the surrounding tissue. There was also excellent tissue integration between the bone and periodontal ligament compartments as well as the tooth root interface, enabling the attachment of periodontal ligament fibers into newly formed cementum and bone. Bone coverage along the root surface increased between weeks 5 and 10 in the Bm-MSC and PDLC groups. At week 10, the micro-computed tomography results showed that the PDLC group had greater bone fill as compared with the empty scaffold, while the GC group had less bone than the 3 other groups (control, Bm-MSC, and PDLC). Periodontal regeneration, as measured by histologically verified new bone and cementum formation with obliquely inserted periodontal ligament fibers, increased between 5 and 10 wk for the empty, Bm-MSC, and PDLC groups, while the GC group was inferior to the Bm-MSC and PDLC groups at 10 wk. This study demonstrates that periodontal regeneration can be achieved via the utilization of a multiphasic construct, with Bm-MSCs and PDLCs obtaining superior results as compared with GC-derived cell sheets.

Progress in three-dimensional printing with growth factors

Incorporation of growth factors in biomedical constructs can encourage cellular activities necessary for tissue regeneration within an implant system. Three-dimensional printing offers a capacity for spatial dictation and dosage control of incorporated growth factors which promises to minimize complications from the supraphysiologic doses and burst release involved in current growth factor delivery systems. Successful implementation of three-dimensional printing with growth factors requires preservation of the bioactivity of printed growth factors, spatial localization of growth factors within the construct architecture during printing, and controlled release of growth factors after printing. This review describes demonstrated approaches for addressing each of these goals, including direct inclusion of growth factors with the biomaterial during printing, or intermediary encapsulation of growth factors in delivery vehicles such as microparticles or nanoparticles.

Tissue Engineered Constructs for Periodontal Regeneration: Current Status and Future Perspectives

The periodontium, consisting of gingiva, periodontal ligament, cementum, and alveolar bone, is a hierarchically organized tissue whose primary role is to provide physical and mechanical support to the teeth. Severe cases of periodontitis, an inflammatory condition initiated by an oral bacterial biofilm, can lead to significant destruction of soft and hard tissues of the periodontium and result in compromised dental function and aesthetics. Although current treatment approaches can limit the progression of the disease by controlling the inflammatory aspect, complete periodontal regeneration cannot be predictably achieved. Various tissue engineering approaches are investigated for their ability to control the critical temporo-spatial wound healing events that are essential for achieving periodontal regeneration. This paper reviews recent progress in the field of periodontal tissue engineering with an emphasis on advanced 3D multiphasic tissue engineering constructs (TECs) and provides a critical analysis of their regenerative potential and limitations. The review also elaborates on the future of periodontal tissue engineering, including scaffold customization for individual periodontal defects, TEC's functionalization strategies for imparting enhanced bioactivity, periodontal ligament fiber guidance, and the utilization of chair-side regenerative solutions that can facilitate clinical translation.

Advantages of Graphene Biosensors for Human Stem Cell Therapy Potency Assays

Regenerative medicine is challenged by the need to conform to rigorous guidelines for establishing safe and effective development and translation of stem cell-based therapies. Counteracting widespread concerns regarding unproven cell therapies, stringent cell-based assays seek not only to avoid harm but also to enhance quality and efficacy. Potency indicates that the cells are functionally fit for purpose before they are administered to the patient. It is a paramount quantitative critical quality attribute serving as a decisive release criterion. Given a broad range of stem cell types and therapeutic contexts the potency assay often comprises one of the most demanding hurdles for release of a cell therapy medicinal product. With need for improved biomarker assessment and expedited measurement, recent advances in graphene-based biosensors suggest that they are poised to be valuable platforms for accelerating potency assay development. Among several potential advantages, they offer versatility for sensitive measurement of a broad range of potential biomarker types, cell biocompatibility for direct measurement, and small sample sufficiency, plus ease of use and point-of-care applicability.

Evaluating the oxysterol combination of 22(S)-hydroxycholesterol and 20(S)-hydroxycholesterol in periodontal regeneration using periodontal ligament stem cells and alveolar bone healing models

BACKGROUND

Oxysterols, oxygenated by-products of cholesterol biosynthesis, play roles in various physiological and pathological systems. However, the effects of oxysterols on periodontal regeneration are unknown. This study investigated the effects of the specific oxysterol combination of 22(S)-hydroxycholesterol and 20(S)-hydroxycholesterol (SS) on the regeneration of periodontal tissues using in-vitro periodontal ligament stem cells (PDLSCs) and in-vivo models of alveolar bone defect.

METHODS

To evaluate the effects of the combined oxysterols on PDLSC biology, we studied the SS-induced osteogenic differentiation of PDLSCs by assessing alkaline phosphatase activity, intracellular calcium levels [Ca²⁺]_i, matrix mineralization, and osteogenic marker mRNA expression and protein levels. To verify the effect of oxysterols on alveolar bone regeneration, we employed tooth extraction bone defect models.

RESULTS

Oxysterols increased the osteogenic activity of PDLSCs compared with the control group. The expression of liver X receptor (LXR) α and β, the nuclear receptors for oxysterols, and their target gene, ATP-binding cassette transporter A1 (ABCA1), increased significantly during osteogenesis. Oxysterols also increased protein levels of the hedgehog (Hh) receptor Smo and the transcription factor Gli1. We further confirmed the reciprocal reaction between the LXRs and Hh signaling. Transfection of both LXRα and LXRβ siRNAs decreased Smo and Gli1 protein levels. In contrast, the inhibition of Hh signaling attenuated the LXRα and LXRβ protein levels. Subsequently, SS-induced osteogenic activity of PDLSCs was suppressed by the inhibition of LXRs or Hh signaling. The application of SS also enhanced bone formation in the defect sites of in-vivo models, showing equivalent efficacy to recombinant human bone morphogenetic protein-2.

CONCLUSIONS

These findings suggest that a specific combination of oxysterols promoted periodontal regeneration by regulating PDLSC activity and alveolar bone regeneration.

Stem Cells from Dental Pulp: What Epigenetics Can Do with Your Tooth

Adult stem cells have attracted scientific attention because they are able to self-renew and differentiate into several specialized cell types. In this context, human dental tissue-derived mesenchymal stem cells (hDT-MSCs) have emerged as a possible solution for repairing or regenerating damaged tissues. These cells can be isolated from primary teeth that are naturally replaced, third molars, or other dental tissues and exhibit self-renewal, a high proliferative rate and a great multilineage potential. However, the cellular and molecular mechanisms that determine lineage specification are still largely unknown. It is known that a change in cell fate requires the deletion of existing transcriptional programs, followed by the establishment of a new developmental program to give rise to a new cell lineage. Increasing evidence indicates that chromatin structure conformation can influence cell fate. In this way, reversible chemical modifications at the DNA or histone level, and combinations thereof can activate or inactivate cell-type-specific gene sequences, giving rise to an alternative cell fates. On the other hand, miRNAs are starting to emerge as a possible player in establishing particular somatic lineages. In this review, we discuss two new and promising research fields in medicine and biology, epigenetics and stem cells, by summarizing the properties of hDT-MSCs and highlighting the recent findings on epigenetic contributions to the regulation of cellular differentiation.

3D printing integrated with controlled delivery for musculoskeletal tissue engineering

3D printing is an emerging tool to fabricate scaffolds for tissue engineering and regenerative medicine, benefited by customized design, tunable internal microstructure and a wide range of applicable materials. As a recent technical advancement, 3D-printed scaffolds have been incorporated with a controlled delivery of growth factors and/or other bioactive cues to facilitate tissue regeneration, in addition to providing a temporal structural substrate for cell and tissue ingrowth. This review covers a number of the existing approaches to incorporate a controlled delivery system in 3D-printed scaffolds from hydrogel adsorption and surface coating to chemical integration and embedding microspheres. In addition, we discuss the advantages and disadvantages of each delivery method integrated in 3D-printed scaffolds, outstanding challenges and future directions.

Application of Stem Cells in Oral Disease Therapy: Progresses and Perspectives

Stem cells are undifferentiated and pluripotent cells that can differentiate into specialized cells with a more specific function. Stem cell therapies become preferred methods for the treatment of multiple diseases. Oral and maxillofacial defect is one kind of the diseases that could be most possibly cured by stem cell therapies. Here we discussed oral diseases, oral adult stem cells, iPS cells, and the progresses/challenges/perspectives of application of stem cells for oral disease treatment.