Evaluating the bioequivalence of metronidazole tablets and analyzing the effect of in vitro dissolution on in vivo absorption based on PBPK modeling

In silico prediction of bioequivalence of atorvastatin tablets based on GastroPlus™ software

The prediction of intestinal absorption of various drugs based on computer simulations has been a reality. However, in vivo pharmacokinetic simulations and virtual bioequivalence evaluation based on GastroPlus™ have not been found. This study aimed to simulate plasma concentrations with different dissolution profiles and run population simulations to evaluate the bioequivalence of test and reference products of atorvastation using GastroPlus software. The dissolution profiles of the reference and test products of atorvastatin (20 mg tablets), and clinical plasma concentration-time data of the reference product were used for the simulations. The results showed that the simulated models were successfully established for atorvastatin tablets. Population simulation results indicated that the test formulation was bioequivalent to the reference formulation. The findings suggest that modelling is an essential tool to demonstrating the possibility of pharmacokinetic and bioequivalence for atorvastatin. It will contribute to understanding the potential risks during the development of generic products.

Harmonizing Biopredictive Methodologies Through the Product Quality Research Institute (PQRI) Part I: Biopredictive Dissolution of Ibuprofen and Dipyridamole Tablets

Assessing in vivo performance to inform formulation selection and development decisions is an important aspect of drug development. Biopredictive dissolution methodologies for oral dosage forms have been developed to understand in vivo performance, assist in formulation development/optimization, and forecast the outcome of bioequivalence studies by combining them with simulation tools to predict plasma profiles in humans. However, unlike compendial dissolution methodologies, the various biopredictive methodologies have not yet been harmonized or standardized. This manuscript presents the initial phases of an effort to develop best practices and move toward standardization of the biopredictive methodologies through the Product Quality Research Institute (PQRI, https://pqri.org ) entitled "The standardization of in vitro predictive dissolution methodologies and in silico bioequivalence study Working Group." This Working Group (WG) is comprised of participants from 10 pharmaceutical companies and academic institutes. The project will be accomplished in a total of five phases including assessing the performance of dissolution protocols designed by the individual WG members, and then building "best practice" protocols based on the initial dissolution profiles. After refining the "best practice" protocols to produce equivalent dissolution profiles, those will be combined with physiologically based biopharmaceutics models (PBBM) to predict plasma profiles. In this manuscript, the first two of the five phases are reported, namely generating biopredictive dissolution profiles for ibuprofen and dipyridamole and using those dissolution profiles with PBBM to match the clinical plasma profiles. Key experimental parameters are identified, and this knowledge will be applied to build the "best practice" protocol in the next phase.

Utility of Physiologically Based Biopharmaceutics Modeling (PBBM) in Regulatory Perspective: Application to Supersede f2, Enabling Biowaivers & Creation of Dissolution Safe Space

Product DRL is a generic IR tablet formulation with BCS Class-III API, available in two strengths: 50mg & 100mg. The reference and test formulations have salt-A & salt-B of API but both products were bioequivalent based on the in vivo bioequivalence study conducted for higher strength 100mg. While leveraging the generic product to different market, the reference product from other market showed slower release than generic formulation resulting in f2<50 in pH 6.8 for both 50mg and 100mg, because of which waiver for BE study couldn't be granted. To support f2 mismatch at 100mg, 50mg and to facilitate biowaiver of 50mg, a Gastroplus® PBBM model was developed & validated. Virtual bioequivalence trials were performed using the slower dissolution profile of other market reference. It was demonstrated that despite slower dissolution, bioequivalence was achieved for test product against other market reference for 50mg & 100mg strengths. Additionally, dissolution safe space was created using virtual dissolution profiles, which indicated that when >85% released up to 60 min there is no impact on bioequivalence. Overall, for molecules with permeability controlled absorption (i.e. BCS-III), very rapid dissolution criteria can be relaxed by defining dissolution safe space thereby enabling more waivers in future.

Mechanistic Modeling of In Vitro Skin Permeation and Extrapolation to In Vivo for Topically Applied Metronidazole Drug Products Using a Physiologically Based Pharmacokinetic Model

Physiologically based pharmacokinetic (PBPK) modeling has increasingly been employed in dermal drug development and regulatory assessment, providing a framework to integrate relevant information including drug and drug product attributes, skin physiology parameters, and population variability. The current study aimed to develop a stepwise modeling workflow with knowledge gained from modeling in vitro skin permeation testing (IVPT) to describe in vivo exposure of metronidazole locally in the stratum corneum following topical application of complex semisolid drug products. The initial PBPK model of metronidazole in vitro skin permeation was developed using infinite and finite dose aqueous metronidazole solution. Parameters such as stratum corneum lipid-water partition coefficient (K_sclip/water) and stratum corneum lipid diffusion coefficient (D_sclip) of metronidazole were optimized using IVPT data from simple aqueous solutions (infinite) and MetroGel (10 mg/cm² dose application), respectively. The optimized model, when parameterized with physical and structural characteristics of the drug products, was able to accurately predict the mean cumulative amount permeated (cm²/h) and flux (μg/cm²/h) profiles of metronidazole following application of different doses of MetroGel and MetroCream. Thus, the model was able to capture the impact of differences in drug product microstructure and metamorphosis of the dosage form on in vitro metronidazole permeation. The PBPK model informed by IVPT study data was able to predict the metronidazole amount in the stratum corneum as reported in clinical studies. In summary, the proposed model provides an enhanced understanding of the potential impact of drug product attributes in influencing in vitro skin permeation of metronidazole. Key kinetic parameters derived from modeling the metronidazole IVPT data improved the predictions of the developed PBPK model of in vivo local metronidazole concentrations in the stratum corneum. Overall, this work improves our confidence in the proposed workflow that accounts for drug product attributes and utilizes IVPT data toward improving predictions from advanced modeling and simulation tools.

The Clinical Effects of Metronidazole Vaginal Effervescent Tablets Combined with Kushen Suppository in the Treatment of Trichomonas Vaginitis

Objective

The aim of this study was to explore the clinical effects of metronidazole vaginal effervescent tablets combined with Kushen suppository in the treatment of Trichomonas vaginitis.

Methods

Ninety patients with trichomoniasis admitted to our hospital from January 2019 to January 2020 were prospectively analyzed and randomly divided into a control group (n = 45) treated with metronidazole vaginal effervescent tablets and an experimental group (n = 45) treated with Kushen suppository on top of the control group using the random number table method. The clinical effects, inflammatory factors, and microcirculation indexes were compared. We assessed patient's vaginal health by Vaginal Health Score Scale (VHS) before and after treatment and estimated their quality of life according to Generic Quality of Life Inventory-74 (GQOLI-74). A follow-up visit was conducted to compare patient's recurrence 3 months after treatment.

Results

Distinctly higher total clinical effective of the experimental group compared with that of the control group was obtained (P < 0.05); the serum level of inflammatory factors of the experimental group was dramatically lower than that of the control group after treatment (P < 0.001); the experimental group experienced a favorable microcirculation index in comparison with the control group (P < 0.001); superior VHS (P < 0.001) and GQOLI-74 (P < 0.05) scores of the experimental group after treatment compared to those of the control group were observed; the recurrence rate of the experimental group 3 months after treatment was significantly decreased in comparison with that of the control group (P < 0.05).

Conclusion

Metronidazole vaginal effervescent tablets combined with Kushen suppository can effectively improve the clinical symptoms of patients with trichomonas vaginitis, abate patient's inflammatory reaction, and raise their quality of life, which is worthy of promotion.

An Assessment of Occasional Bio-Inequivalence for BCS1 and BCS3 Drugs: What are the Underlying Reasons?

Despite having adequate solubility properties, bioequivalence (BE) studies performed on immediate release formulations containing BCS1/3 drugs occasionally fail. By systematically evaluating a set of 17 soluble drugs where unexpected BE failures have been reported and comparing to a set of 29 drugs where no such reports have been documented, a broad assessment of the risk factors leading to BE failure was performed. BE failures for BCS1/3 drugs were predominantly related to changes in C_max rather than AUC. C_max changes were typically modest, with minimal clinical significance for most drugs. Overall, drugs with a sharp plasma peak were identified as a key factor in BE failure risk. A new pharmacokinetic term (t½C_max) is proposed to identify drugs at higher risk due to their peak plasma profile shape. In addition, the analysis revealed that weak acids, and drugs with particularly high gastric solubility are potentially more vulnerable to BE failure, particularly when these features are combined with a sharp C_max peak. BCS3 drugs, which are often characterised as being more vulnerable to BE failure due to their potential for permeation and transit to be altered, particularly by excipient change, were not in general at greater risk of BE failures. These findings will help to inform how biowaivers may be optimally applied in the future.

In Silico Modeling and Simulation to Guide Bioequivalence Testing for Oral Drugs in a Virtual Population

Model-informed drug discovery and development (MID3) shows great advantages in facilitating drug development. A physiologically based pharmacokinetic model is one of the powerful computational approaches of MID3, and the emerging field of virtual bioequivalence is well recognized to be the future of the physiologically based pharmacokinetic model. Based on the translational link between in vitro, in silico, and in vivo, virtual bioequivalence study can evaluate the similarity and potential difference of pharmacokinetic and clinical performance between test and reference formulations. With the aid of virtual bioequivalence study, the pivotal information of clinical trials can be provided to streamline the development for both new and generic drugs. However, a regulatory framework of virtual bioequivalence study has not reached its full maturity. Therefore, this article aims to present an overview of the current status of bioequivalence study, identify the framework of virtual bioequivalence studies for oral drugs, and also discuss the future opportunities of virtual bioequivalence in supporting the waiver and optimization of in vivo clinical trials.

Application of physiologically based biopharmaceutics modeling to understand the impact of dissolution differences on in vivo performance of immediate release products: The case of bisoprolol

Merck KGaA observed slight differences in the dissolution of Concor® (bisoprolol) batches over the years. The purpose of this work was to assess the impact of in vitro dissolution on the simulated pharmacokinetics of bisoprolol using in vitro-in vivo relationship established with available in vitro dissolution and corresponding plasma concentrations-time data for several bisoprolol batches. A mechanistic absorption model/physiologically based pharmacokinetics model linked with a biopharmaceutics tool such as dissolution testing, namely, physiologically based biopharmaceutics modeling (PBBM), can be valuable in determining a dissolution "safe space." A PBBM for bisoprolol was built using in vitro, in silico, and clinical data. We evaluated potential influences of variability in dissolution of bisoprolol batches on its clinical performance through PBBM and virtual bioequivalence (BE) trials. We demonstrated that in vitro dissolution was not critical for the clinical performance of bisoprolol over a wide range of tested values. Based on virtual BE trials, safe space expansion was explored using hypothetical dissolution data. A formulation with in vitro dissolution reaching 70% dissolved in 15 min and 79.5% in 30 min was shown to be BE to classical fast dissolution of bisoprolol (>85% within 15 min), as point estimates and 90% confidence intervals of the maximum plasma concentration and area under the concentration-time curve were within the BE limits (0.8-1.25).

In Vitro Dissolution and in Silico Modeling Shortcuts in Bioequivalence Testing

Purpose: To review in vitro testing and simulation platforms that are in current use to predict in vivo performances of generic products as well as other situations to provide evidence for biowaiver and support drug formulations development. Methods: Pubmed and Google Scholar databases were used to review published literature over the past 10 years. The terms used were “simulation AND bioequivalence” and “modeling AND bioequivalence” in the title field of databases, followed by screening, and then reviewing. Results: A total of 22 research papers were reviewed. Computer simulation using software such as GastroPlus™, PK-Sim^® and SimCyp^® find applications in drug modeling. Considering the wide use of optimization for in silico predictions to fit observed data, a careful review of publications is required to validate the reliability of these platforms. For immediate release (IR) drug products belonging to the Biopharmaceutics Classification System (BCS) classes I and III, difference factor (ƒ₁) and similarity factor (ƒ₂) are calculated from the in vitro dissolution data of drug formulations to support biowaiver; however, this method can be more discriminatory and may not be useful for all dissolution profiles. Conclusions: Computer simulation platforms need to improve their mechanistic physiologically based pharmacokinetic (PBPK) modeling, and if prospectively validated within a small percentage of error from the observed clinical data, they can be valuable tools in bioequivalence (BE) testing and formulation development.