Modelling complex liquid crystal mixtures: from polymer dispersed mesophase to nematic nanocolloids

Long term phase separation dynamics in liquid crystal-enriched microdroplets obtained from binary fluid mixtures

The dynamics of long term phase separation in binary liquid mixtures remains a subject of fundamental interest. Here, we study a binary liquid mixture, where the minority phase is confined to a liquid crystal (LC)-rich droplet, by investigating the evolution of size, defect and mesogen alignment over time. We track the binary liquid mixture evolving towards equilibrium by visualising the configuration of the liquid crystal droplet through polarisation microscopy. We compare our experimental findings with computational simulations and elucidate differences between bulk phases and confined droplets based on the respective thermodynamics of phase separation. Our work provides insights on how phase transitions on the microscale can deviate from bulk phase diagrams with relevance to other material systems, such as the liquid-liquid phase separation of polymer and protein solutions.

Characterization of Alginate–Gelatin–Cholesteryl Ester Liquid Crystals Bioinks for Extrusion Bioprinting of Tissue Engineering Scaffolds

Tissue engineering (TE) is an innovative approach to tackling many diseases and body parts that need to be replaced by developing artificial tissues and organs. Bioinks play an important role in the success of various TE applications. A bioink refers to a combination of a living cell, biomaterials, and bioactive molecules deposited in a layer-by-layer form to fabricate tissue-like structures. The research on bioink attempts to offer a 3D complex architecture and control cellular behavior that improve cell physical properties and viability. This research proposed a new multi-material bioink based on alginate (A), gelatin (G), and cholesteryl ester liquid crystals (CELC) biomaterials, namely (AGLC) bioinks. The development of AGLC was initiated with the optimization of different concentrations of A and G gels to obtain a printable formulation of AG gels. Subsequently, the influences of different concentrations of CELC with AG gels were investigated by using a microextrusion-based 3D bioprinting system to obtain a printed structure with high shape fidelity and minimum width. The AGLC bioinks were formulated using AG gel with 10% weight/volume (w/v) of A and 50% w/v G (AG10:50) and 1%, 5%, 10%, 20%, and 40% of CELC, respectively. The AGLC bioinks yield a high printability and resolution blend. The printed filament has a minimum width of 1.3 mm at a 1 mL/min extrusion rate when the A equals 10% w/v, G equals 50% w/v, and CELC equals 40% v/v (AGLC40). Polymerization of the AGLC bioinks with calcium (Ca²⁺) ions shows well-defined and more stable structures in the post-printing process. The physicochemical and viability properties of the AGLC bioinks were examined by FTIR, DSC, contact angle, FESEM, MTT assay, and cell interaction evaluation methods. The FTIR spectra of the AGLC bioinks exhibit a combination of characteristics vibrations of AG10:50 and CELC. The DSC analysis indicates the high thermal stability of the bioinks. Wettability analysis shows a reduction in the water absorption ability of the AGLC bioinks. FESEM analysis indicates that the surface morphologies of the bioinks exhibit varying microstructures. In vitro cytotoxicity by MTT assay shows the ability of the bioinks to support the biological activity of HeLa cells. The AGLC bioinks show average cell viability of 82.36% compared to the control (90%). Furthermore, cultured cells on the surface of AGLC bioinks showed that bioinks provide favorable interfaces for cell attachment.

Polymer-dispersed liquid-crystal-based switchable glazing fabricated via vacuum glass coupling

Polymer-dispersed liquid crystals (PDLCs) exhibiting transmittance switching are utilized for preserving energy and protecting privacy. Here we prepared a typical PDLC mixture from a commercially available polymer and liquid crystal with nano-beads. A wire-bar coater was used to coat the PDLC mixture on indium-tin-oxide-coated glass, and a PDLC cell was assembled by coupling another glass in a vacuum, instead of a polymer film. Uniform glass-based PDLCs were fabricated successfully with an area of 15 × 15 cm², while an injection process with capillary action was not available for this large-scale device fabrication. The switching behavior of the cells was characterized by ramping the AC voltage, and a transmittance change of ∼70% was measured. In a typical roll-to-roll process, only flexible polymer films have been used in lamination, in which deterioration in transparency occurs over the course of time, reducing the efficiency. In this study, to improve the optical properties, PDLC switchable glazing is fabricated directly onto glass substrates instead of onto plastic polymers. This PDLC switchable glazing, exhibiting low haziness and wide-angle vision, can be fabricated at a large scale by a vacuum-coupling process, with potential use as glass windows for energy-efficient buildings.

A vacuum-coupling technique is suggested to fabricate a glass-based PDLC, without using a roll-to-roll process, to improve the optical properties.

Dielectric, Thermal and Mechanical Properties of l,d-Poly(Lactic Acid) Modified by 4'-Pentyl-4-Biphenylcarbonitrile and Single Walled Carbon Nanotube

We report here the preparation and thermal, electrical and mechanical characterization of binary and ternary films based on l,d-poly(lactic acid) (l,d-PLA) and 4'-pentyl-4-biphenylcarbonitrile (5CB) and Single Walled Carbon Nanotubes (SWCN) with various weight ratio. The transitions for all investigated hybrid compositions detected by differential scanning calorimetry method were shifted to lower temperatures with increasing the concentration of 5CB in the mixture with polymer. Frequency domain dielectric spectroscopy method and thermal imaging together with polarized optical microscope were used to study electric and structural properties of created hybrid compositions. The best electrical conductivity was observed for hybrid composite l,d-PLA:5CB:SWCN with ratio 10:1:0.5 w/w/w - resistance of 41.0 Ω and thermal response up to 160 °C without causing any damages. Films in crystal form are much more inflexible than in amorphous and can be explain by the cold crystallization occurs at heating while the materials changed their physical state. The value of ε' increases with increasing the 5CB admixture. Moreover, the addition of 5CB to l,d-PLA resulted in increased flexibility of polymeric base films. The best material flexibility and short-term strength were obtained for l,d-PLA sample with 9% 5CB content.

Thermodynamic modelling of acidic collagenous solutions: from free energy contributions to phase diagrams

Tropocollagen is considered one of the main precursors in the fabrication of collagen-based biomaterials. Triple helix acidic solutions of collagen I have been shown experimentally to lead to chiral plywood architectures found in bone and "cornea" like tissues. As these plywoods are solid analogues of liquid crystal architectures, bio-inspired processing and fabrication platforms based on liquid crystal physics and thermodynamics will continue to play an essential role. For tissue engineering applications, it has been shown that dilute isotropic collagen solutions need to be flow processed first and then dehydrated. Thus, a complete fundamental understanding of the thermodynamics and free energy contributions in acidic collagen aqueous solutions is necessary to avoid expensive trial-and-error fabrication. To achieve this goal, we analyze the microscopic mechanisms of ordering and interactions in solutions of triple helix collagen, namely mixing, attraction, excluded-volume and chirality. To capture the mentioned physics, we then incorporate and integrate the Flory-Huggins, Maier-Saupe, Onsager and Frank theories. Nonetheless, they together are incapable of providing an acceptable mesophasic description in acidic collagenous solutions because tropocollagen biomacromolecules are positively charged. We then explore a simple and accurate electrostatic mean-field potential. Our results on collagen are in good agreement with experiments and include phase diagrams, phase transition thresholds, and critical isotropic/cholesteric order parameters. The present extended theory is shown to properly converge to classical liquid crystal models and is used to express the phenomenological Landau-de Gennes parameters with more fundamental quantities. This study provides a platform to derive accurate process models for the fabrication of collagen-based materials, considering and benefitting from the full range of underlying interactions.

Polymer functionalized nanoparticles in liquid crystals: combining PDLCs with LC nanocomposites

Liquid crystal (LC)-polymer blends are important stimuli responsive materials already employed in a wide range of applications whereas nanoparticle (NP)-LC blends are an emerging class of nanocomposites. Polymer ligands offer the advantages of synthetic simplicity along with chemical and molecular weight tunability. Here we compare the phase behavior of 5CB blended with poly(ethylene oxide) (PEO) and with gold NPs functionalized with thiolated PEO (AuNP-PEO) as a function of PEO concentration by DSC, POM and 13C NMR spectroscopy. Both PEO and the AuNP-PEO form uniform dispersions in isotropic 5CB and phase separate below the I-N phase transition temperature. Above the PEO crystallization temperature, the PEO/5CB blends show the expected biphasic state of PEO rich-isotropic liquid co-existing with PEO-poor nematic droplets. At PEO concentrations above 10 wt%, nematic 5CB nucleates with PEO crystallization. Both PEO and AuNP-PEO induce homeotropic alignment of the 5CB matrix immediately below TNI. The AuNP-PEO/5CB blends form thermally reversible cellular networks similar to AuNPs functionalized with low molecular weight mesogenic ligands. A thermodynamic model to account for the observed phase behavior is presented.

Phase behaviour and applications of a binary liquid mixture of methanol and a thermotropic liquid crystal

Herein, we report on the phase behaviour of a binary liquid mixture composed of methanol (MeOH) and the thermotropic liquid crystal 4-cyano-4'-pentylbiphenyl (5CB). The corresponding phase diagram combines features of a conventional liquid-liquid mixture with characteristics that are particular to the nematic liquid crystal. We observe four arrangements as a function of composition and temperature, namely monophasic isotropic, monophasic nematic, biphasic isotropic-isotropic and biphasic isotropic-nematic, with an upper critical solution temperature of 24.4 ± 0.5 °C. The interplay of nematogenic and non-nematogenic species offers tunability of phase mixing and phase composition in an accessible temperature window and provides novel routes for the extraction of target compounds, here exemplarily shown for Crystal Violet, Doxorubicin, Eosin Y, Rhodamine 6G and Sudan IV.

Unusual photoresponses in the upper critical solution temperature of polymer solutions mediated by changes in intermolecular interactions in an azo-doped liquid crystalline solvent

Photoinduced changes in the upper critical solution temperature (UCST) were investigated for polymer solutions in an azobenzene-doped liquid crystal solvent. The UCST of poly(methyl methacrylate) (PMMA) and polystyrene (PS) solutions dropped upon irradiation with UV light, which induces trans-cis photoisomerization of the doped azo dye. In the case of PMMA solutions, the photoinduced drop in UCST was significantly larger than that expected from previous studies using azo-based polymers and common solvents. Moreover, the UCST of PS solutions also decreased under photoirradiation, in a direction opposite to that expected from the contribution of polarity. X-ray diffraction data of the solvent suggest that the decreased intermolecular interaction in the solvent (i.e. larger distance between the solvent molecules) is responsible for the photoresponsive behavior of the UCST. The proposed mechanism is consistent with the Flory-Huggins theory. Using such photoresponses in the UCST, the isothermal transition between 2-phase and 1-phase states by photoirradiation was demonstrated.

Molecular Considerations for Mesophase Interaction and Alignment of Lyotropic Liquid Crystalline Semiconducting Polymers

Intermolecular interactions in conjugated polymers influence crystallinity, self-assembly, and packing motif, factors which in turn crucially impact charge transport properties such as carrier mobility in organic electronic devices. Correlated alignment of molecular and crystalline morphologies provides direct pathways for charge carriers to follow; however, the role of intermolecular interactions in achieving this is unexplored. Herein, we synthesize a series of lyotropic liquid crystalline conjugated polymers with variable side-chain structure to lend distinct steric repulsion and van der Waals attractive forces to each mesophase. We use this to investigate the role of intermolecular interactions on mesophase alignment. The strength of intermolecular interaction for each mesophase is compared by measuring melting temperature, π-stacking distance, and the Maier-Saupe interaction parameter. In general we find that side-chain structure can impact interaction strength by varying steric repulsion and backbone attractions and that the Maier-Saupe interaction parameters correlate with higher degrees of alignment after shearing, achieving a dichroic absorbance ratio of up to 2. This observation is used to develop equilibrium processing methods for fabricating macroscopically aligned polymer substrates used in transistors, improving mobility by a factor of 3 compared to spin-coated devices.

Elastic response and phase behavior in binary liquid crystal mixtures

Utilizing density-of-states simulations, we perform a full mapping of the phase behavior and elastic responses of binary liquid crystalline mixtures represented by the multicomponent Lebwohl-Lasher model. Our techniques are able to characterize the complete phase diagram, including nematic-nematic phase separation predicted by mean-field theories, but previously not observed in simulations. Mapping this phase diagram permits detailed study of elastic properties across the miscible nematic region. Importantly, we observe for the first time local phase separation and disordering driven by the application of small linear perturbations near the transition temperature and more significantly through nonlinear stresses. These findings are of key importance in systems of blended nematics which contain particulate inclusions, or are otherwise confined.

Mechanisms and shape predictions of nematic disclination branching under conical confinement

Liquid crystals (LCs) are self-organizing anisotropic viscoelastic soft materials that flow like viscous liquids and display anisotropies like crystals. When a nematic liquid crystal is confined to a capillary tube with strong anchoring conditions, disclination defects of higher (+1) and lower (+1/2) topological charges can coexist, connected through a defect branch point. The shape of the +1/2 disclination lines emanating from the branch point are functions of confinement and bulk elasticity. Previous work shows that nematic liquid crystals under cylindrical confinement display a radial (one +1 line)-to-planar polar (two +1/2 lines) defect texture transition through the nucleation and uniform motion of a disclination branch point. Here we present analysis, scaling and modeling based on a non-linear non-local nematic elastic equation that shows that a branch point also can be generated from disclinations in a liquid crystal confined to different conical geometries with homeotropic anchoring conditions. The cone aperture increases the bending stiffness but decreases the curvature of the disclination. These competing effects lead to a decrease in the total disclination curvature, increase in elastic energy and volume of the branching region. The results are summarized into power laws and integrated into a shape/energy diagram that reveals the effects of confinement and its gradient (cone angle) on disclination shape selection. These new findings are useful to assess the Frank elasticity of new nematic liquid crystals and to predict novel defect structures in complex confinement, including biological microfluidics and mesophase fiber spinning.

Liquid-crystal mediated nanoparticle interactions and gel formation

Colloidal particles embedded within nematic liquid crystals exhibit strong anisotropic interactions arising from preferential orientation of nematogens near the particle surface. Such interactions are conducive to forming branched, gel-like aggregates. Anchoring effects also induce interactions between colloids dispersed in the isotropic liquid phase, through the interactions of the pre-nematic wetting layers. Here we utilize computer simulation using coarse-grained mesogens to perform a molecular-level calculation of the potential of mean force between two embedded nanoparticles as a function of anchoring for a set of solvent conditions straddling the isotropic-nematic transition. We observe that strong, nontrivial interactions can be induced between particles dispersed in mesogenic solvent, and explore how such interactions might be utilized to induce a gel state in the isotropic and nematic phases.

A molecular and thermodynamic view of the assembly of gold nanoparticles in nematic liquid crystal

The molecular interactions driving the assembly of gold nanoparticles (AuNPs) in a nematic liquid crystal (LC) are directly detected by nuclear magnetic resonance (NMR) spectroscopy and thermodynamically analyzed. The orientational orders of the selectively deuterated LC matrix and AuNP ligands, each separately followed by variable temperature (2)H NMR as a function of particle concentration, were observed to be strongly correlated. The mechanism of the reversible formation of long-range, quasi-periodic nanoparticle structures is attributed to the coupling of the AuNP ligands to the LC matrix, inducing an isotropic-nematic biphasic state. Experimentally validated thermodynamic modeling shows that, in contrast to colloidal nematics that are dominated by elastic forces, nematic dispersions of nanoparticles self-organize through a subtle balance of entropic forces and excluded volume, interface-mediated mesogen and nanoparticle molecular interactions, and couplings between conserved and nonconserved order parameters. Fine-tuning of these interactions through ligand and mesogen chemistry, together with mesoscale modeling, provides a route for materials innovations by merging structured fluid physics and nanoscience.