Dimensional characteristics of the major types of amphibole mineral particles and the implications for carcinogenic risk assessment

A review of the mesotheliogenic potency of cleavage fragments found in talc

It has long been recognized that amphibole minerals, such as cleavage fragments of tremolite and anthophyllite, may exist in some talc deposits. We reviewed the current state of the science regarding the factors influencing mesotheliogenic potency of cleavage fragments, with emphasis on those that may co-occur in talc deposits, including dimensional and structural characteristics, animal toxicology, and the most well-studied cohort exposed to talc-associated cleavage fragments. Based on our review, multiple lines of scientific evidence demonstrate that inhaled cleavage fragments associated with talc do not pose a mesothelioma hazard.

Using particle dimensionality-based modeling to estimate lung carcinogenicity of 3D printer emissions

The use of 3D printing technologies by industry and consumers is expanding. However, the approaches to assess the risk of lung carcinogenesis from the emissions of 3D printers have not yet been developed. The objective of the study was to demonstrate a methodology for modeling lung cancer risk related to specific exposure levels as derived from an experimental study of 3D printer emissions for various types of filaments (ABS, PLA, and PETG). The emissions of 15 filaments were assessed at varying extrusion temperatures for a total of 23 conditions in a Class 1,000 cleanroom following procedures described by ANSI/CAN/UL 2904. Three approaches were utilized for cancer risk estimation: (a) calculation based on PM2.5 and PM10 concentrations, (b) a proximity assessment based on the pulmonary deposition fraction, and (c) modeling based on the mass-weighted aerodynamic diameter of particles. The combined distribution of emitted particles had the mass median aerodynamic diameter (MMAD) of 0.35 μm, GSD 2.25. The average concentration of PM2.5 was 25.21 μg/m3 . The spline-based function of aerodynamic diameter allowed us to reconstruct the carcinogenic potential of seven types of fine and ultrafine particles (crystalline silica, fine TiO2 , ultrafine TiO2 , ambient PM2.5 and PM10, diesel particulates, and carbon nanotubes) with a correlation of 0.999, P < 0.00001. The central tendency estimation of lung cancer risk for 3D printer emissions was found at the level of 14.74 cases per 10,000 workers in a typical exposure scenario (average cumulative exposure of 0.3 mg/m3 - years), with the lowest risks for PLA filaments, and the highest for PETG type.

Carbon nanotube pathogenicity conforms to a unified theory for mesothelioma causation by elongate materials and fibers

The purpose of this review is to elucidate how dimensional and durability characteristics of high aspect ratio nanomaterials (HARN), including carbon nanotubes (CNT) and metal nanowires (MeNW), contribute to understanding the fiber pathogenicity paradigm (FPP), including by explaining the structure-activity relationships (SAR) of a diverse range of natural and synthetic elongate materials that may or may not contribute to mesothelioma development in the lung. While the FPP was originally developed to explain the critical importance of asbestos and synthetic vitreous fiber length, width, aspect ratio and biopersistence in mesothelioma development, there are a vast number of additional inhalable materials that need to be considered in terms of pathogenic features that may contribute to mesothelioma or lack thereof. Not only does the ability to exert more exact control over the length and biopersistence of HARNs confirm the tenets of the FPP, but could be studied by implementating more appropriate toxicological tools for SAR analysis. This includes experimentation with carefully assembled libraries of CNTs and MeNWs, helping to establish more precise dimensional features for interfering in lymphatic drainage from the parietal pleura, triggering of lysosomal damage, frustrated phagocytosis and generation of chronic inflammation. The evidence includes data that long and rigid, but not short and flexible multi-wall CNTs are capable of generating mesotheliomas in rodents based on an adverse outcome pathway requiring access to pleural cavity, obstruction of pleural stomata, chronic inflammation and transformation of mesothelial cells. In addition to durability and dimensional characteristics, bending stiffness of CNTs is a critical factor in determining the shape and rigidity of pathogenic MWCNTs. While no evidence has been obtained in humans that CNT exposure leads to a mesothelioma outcome, it is important to monitor exposure levels and health effect impacts in workers to prevent adverse health outcomes in humans.

Excitable systems: A new perspective on the cellular impact of elongate mineral particles

We investigate how the geometry of elongate mineral particles (EMPs) in contact with cells influences esotaxis, a recently discovered mechanism of texture sensing. Esotaxis is based on cytoskeletal waves and oscillations that are nucleated, shaped, and steered by the texture of the surroundings. We find that all EMPs studied trigger an esotactic response in macrophages, and that this response dominates cytoskeletal activity in these immune cells. In contrast, epithelial cells show little to no esotactic response to the EMPs. These results are consistent with the distinct interactions of both cell types with ridged nanotopographies of dimensions comparable to those of asbestiform EMPs. Our findings raise the question of whether narrow, asbestiform EMPs may also dominate cytoskeletal activity in other types of immune cells that exhibit similar esotactic effects. These findings, together with prior studies of esotaxis, lead us to the hypothesis that asbestiform EMPs suppress the migration of immune cells and activate immune signaling, thereby outcompeting signals that would normally stimulate the immune system in nearby tissue.

Cytotoxicity of fibrous antigorite from New Caledonia

Exposure to asbestos and asbestos-like minerals has been related to the development of severe lung diseases, including cancer and malignant mesothelioma (MM). A high incidence of non-occupational MM was observed in New Caledonia (France) in people living in proximity of serpentinite outcrops, containing chrysotile and fibrous antigorite. Antigorite is a magnesium silicate, which shares with chrysotile asbestos the chemical formula. To achieve information on antigorite toxicity, we investigated the physico-minero-chemical features relevant for toxicity and cellular effects elicited on murine macrophages (MH-S) and alveolar epithelial cells (A549) of three fibrous antigorites (f-Atg) collected in a Caledonian nickel lateritic ore and subjected to supergene alteration. Field Atg were milled to obtain samples suitable for toxicological studies with a similar particle size distribution. UICC chrysotile (Ctl) and a non-fibrous antigorite (nf-Atg) were used as reference minerals. A high variability in toxicity was observed depending on shape, chemical alteration, and surface reactivity. The antigorites shared with Ctl a similar surface area (16.3, 12.1, 20.3, 13.4, and 15.6 m²/g for f-Atg1, 2, 3, nf-Atg, and Ctl). f-Atg showed different level of pedogenetic weathering (Ni depletion f-Atg1 ≪ f-Atg2 and 3) and contained about 50% of elongated mineral particles, some of which exhibited high aspect ratios (AR > 10 μm, 20%, 26%, 31% for f-Atg1, 2, and 3, respectively). The minerals differed in bio-accessible iron at pH 4.5 (f-Atg1 ≪ f-Atg3, < f-Atg2, nf-Atg < Ctl), and surface reactivity (ROS release in solution, f-Atg1 ≪ f-Atg2, 3, nf-Atg, and Ctl). f-Atg2 and f-Atg3 induced oxidative stress and pro-inflammatory responses, while the less altered, poorly reactive sample (f-Atg1) induced negligible effects, as well nf-Atg. The slow dissolution kinetics observed in simulated body fluids may signal a high biopersistence. Overall, our work revealed a significative cellular toxicity of f-Atg that correlates with fibrous habit and surface reactivity.

Dimensions of elongate mineral particles and cancer: A review

CONTEXT

Based on a decade-long exploration, dimensions of elongate mineral particles are implicated as a pivotal component of their carcinogenic potency. This paper summarizes current understanding of the discovered relationships and their importance to the protection of public health.

OBJECTIVES

To demonstrate the relationships between cancer risk and dimensions (length, width, and other derivative characteristics) of mineral fibers by comparing the results and conclusions of previously published studies with newly published information.

METHODS

A database including 59 datasets comprising 341,949 records were utilized to characterize dimensions of elongate particles. The descriptive statistics, correlation and regression analysis, combined with Monte Carlo simulation, were used to select dimensional characteristics most relevant for mesothelioma and lung cancer risk prediction.

RESULTS

The highest correlation between mesothelioma potency factor and weight fraction of size categories is achieved for fibers with lengths >5.6 μm and widths ≤0.26 μm (R = 0.94, P < 0.02); no statistically significant potency was found for lengths <5 μm. These results are consistent with early published estimations, though are derived from a different approach. For combinations of amphiboles and chrysotile (with a consideration of a correction factor between mineral classes), the potency factors correlated most highly with a fraction of fibers longer than 5 μm and thinner than 0.2 μm for mesothelioma, and longer than 5 μm and thinner than 0.3 μm for lung cancer. Because the proportion of long, thin particles in asbestiform vs. non-asbestiform dusts is higher, the cancer potencies of the former are predicted at a significantly higher level. The analysis of particle dimensionality in human lung burden demonstrates positive selection for thinner fibers (especially for amosite and crocidolite) and prevailing fraction of asbestiform habit.

CONCLUSION

Dimensions of mineral fibers can be confirmed as one of the main drivers of their carcinogenicity. The width of fibers emerges as a primary potency predictor, and fibers of all widths with lengths shorter than 5 μm seem to be non-impactful for cancer risk. The mineral dust with a fibrous component is primarily carcinogenic if it contains amphibole fibers longer than 5 μm and thinner than 0.25 μm.

From field analysis to nanostructural investigation: A multidisciplinary approach to describe natural occurrence of asbestos in view of hazard assessment

The environmental impact of natural occurrences of asbestos (NOA) and asbestos-like minerals is a growing concern for environmental protection agencies. The lack of shared sampling and analytical procedures hinders effectively addressing this issue. To investigate the hazard posed by NOA, a multidisciplinary approach that encompasses geology, mineralogy, chemistry, and toxicology is proposed and demonstrated here, on a natural occurrence of antigorite from a site in Varenna Valley, Italy. Antigorite is, together with chrysotile asbestos, one of the serpentine polymorphs and its toxicological profile is still under debate. We described field and petrographic analyses required to sample a vein and to evaluate the NOA-hazard. A combination of standardized mechanical stress and automated morphometrical analyses on milled samples allowed to quantify the asbestos-like morphology. The low congruent solubility in acidic simulated body fluid, together with the toxicity-relevant surface reactivity due to iron speciation, signalled a bio-activity similar or even greater to that of chrysotile. Structural information on the genetic mechanism of antigorite asbestos-like fibres in nature were provided. Overall, the NOA site was reported to contain veins of asbestos-like antigorite and should be regarded as source of potentially toxic fibres during hazard assessment procedure.

Toxicological and epidemiological approaches to carcinogenic potency modeling for mixed mineral fiber exposure: the case of fibrous balangeroite and chrysotile

CONTEXT

Excess mesothelioma risk was observed among chrysotile miners and millers in Balangero, Italy. The mineral balangeroite has been identified in an asbestiform habit from the Balangero chrysotile mine (Italy). Previous studies did not contain a detailed description of the fiber dimensions, thus limiting possible approaches to estimating their carcinogenic potential.

OBJECTIVES

To reconstruct excess mesothelioma risk based on characteristics of mixed fiber exposure.

METHODS

The lengths and widths of particles from a sample of balangeroite were measured by transmission electron microscopy (TEM). Statistical analysis and modeling were applied to assess the toxicological potential of balangeroite.

RESULTS

Balangeroite fibers are characterized as asbestiform, with geometric mean length of 10 μm, width of 0.54 μm, aspect ratio of 19, and specific surface area of 13.8 (1/μm). Proximity analysis shows dimensional characteristics of balangeroite close to asbestiform anthophyllite. Modeling estimates the average potency of balangeroite as 0.04% (95% CI 0.0058, 0.16) based on dimensional characteristics and 0.05% (95% CI-0.04, 0.24) based on epidemiological data. The available estimate of the fraction of balangeroite in the Balangero mine is very approximate. There were no data for airborne balangeroite fibers from the Balangero mine and no lung burden data are available. All estimates were performed using weight fractions of balangeroite and chrysotile. However, based on reasonable assumptions, of the seven cases of mesothelioma in the cohort, about three cases (43%) can be attributed to fibrous balangeroite.

CONCLUSION

The presence of different types of mineral fibers in aerosolized materials even in small proportions can explain observed cancer risks.

Synthesis of Ni-Doped Tremolite Fibers to Help Clarify the Aetiology of the Cytotoxic Outcome of Asbestos

Asbestos fibers act as complex crystal-chemical reservoirs susceptible of releasing potentially toxic elements (such as ions impurities) into the lung cellular environment during permanency and dissolution. To comprehend the exact pathological mechanisms that are triggered upon inhalation of asbestos fibers, in vitro studies on possible interactions between the mineral and the biological system have been carried out mostly by using natural asbestos. However, this latter comprises intrinsic impurities such as Fe²⁺/Fe³⁺ and Ni²⁺ ions, and other eventual traces of metallic pathogens. Furthermore, often, natural asbestos is characterized by the co-presence of several mineral phases, fiber dimensions of which are randomly distributed in width and in length. For these reasons, it is albeit challenging to precisely identify toxicity factors and to define the accurate role of each factor in the overall pathogenesis of asbestos. In this regard, the availability of synthetic asbestos fibers with accurate chemical composition and specific dimensions for in vitro screening tests would represent the perfect tool to correlate asbestos toxicity to its chemico-physical features. Herein, to palliate such drawbacks of natural asbestos, well-defined Ni-doped tremolite fibers were chemically synthesized in order to offer biologists adequate samples for testing the specific role of Ni²⁺ in asbestos toxicity. The experimental conditions (temperature, pressure, reaction time and water amount) were optimized to produce batches of asbestos fibers of the tremolite phase, with uniformly distributed shape and dimensions and a controlled content of Ni²⁺ metal ions.

Journey to the centre of the lung. The perspective of a mineralogist on the carcinogenic effects of mineral fibres in the lungs

This work reviews the bio-chemical mechanisms leading to adverse effects produced when mineral fibres are inhaled and transported in the lungs from the perspective of a mineralogist. The behaviour of three known carcinogenic mineral fibres (crocidolite, chrysotile, and fibrous-asbestiform erionite) during their journey through the upper respiratory tract, the deep respiratory tract and the pleural cavity is discussed. These three fibres have been selected as they are the most socially and economically relevant mineral fibres representative of the classes of chain silicates (amphiboles), layer silicates (serpentine), and framework silicates (zeolites), respectively. Comparison of the behaviour of these fibres is made according to their specific crystal-chemical assemblages and properties. Known biological and subsequent pathologic effects which lead and contribute to carcinogenesis are critically reviewed under the mineralogical perspective and in relation to recent progress in this multidisciplinary field of research. Special attention is given to the understanding of the cause-effect relationships for lung cancer and malignant mesothelioma. Comparison with interstitial pulmonary fibrosis, or "asbestosis", will also be made here. This overview highlights open issues, data gaps, and conflicts in the literature for these topics, especially as regards relative potencies of the three mineral fibres under consideration for lung cancer and mesothelioma. Finally, an attempt is made to identify future research lines suitable for a general comprehensive model of the carcinogenicity of mineral fibres.

Authors' response to the letter to the editor on "characterization of asbestos exposures associated with the use of facial makeups"

We appreciate the opportunity to respond to the comments of the letter writer. The writer states in his Letter to the Editor that the findings in our publication are not interpretable and/or cannot be generalized due to the lack of understanding of the source mine and bulk content of the cosmetic talc used in the facial makeups. In brief, we performed an exposure simulation study using established industrial hygiene methods, planned and conducted by Certified Industrial Hygienists (CIHs), to assess asbestos exposures during the use of facial makeups that were found to contain very low levels of asbestos below the conventional detection limits of X-ray diffraction and polarized light microscopy. In total, 54 personal air samples and 72 area samples were collected from six different products. Out of the 126 samples collected and analyzed, asbestos was only found in eight samples (five personal samples and three area samples). A 95th percentile 24-h time-weighted average (TWA) result of 0.00008 fibers/cubic centimeter was calculated based on censored data and an assumed three applications per day. We believe these results may be of utility to understand the risk of low-level asbestos content in facial makeups regardless of source or bulk content, as described in our study, and do not find the writer's assertion of generalizability or interpretability to be compelling reasons not to apply our results, as is, for prospective purposes.

The health effects of short fiber chrysotile and amphibole asbestos

The potential toxic effects of short chrysotile and amphibole asbestos fibers with lengths <5 to ∼10 µm have been debated over the years. This stems from the large database of epidemiology, toxicology, and in-vitro studies, each of which often provides different information in understanding and differentiating the effects of short fibers. The epidemiology studies in which the cancer potency estimates were based upon relatively high exposure concentrations provide a conservative assessment that shorter fibers would have little if any effect, especially under controlled exposure or environmental conditions that may occur today. The QSAR models have shown that fiber aspect ratio and Mg content are excellent predictors of cancer potency and that short fibers/particles of amphibole would have no effect. The studies of motor vehicle mechanics and in particular workers who serviced chrysotile containing brakes with the majority of the fibers being short provides evidence that motor vehicle mechanics, including workers who were engaged in brake repair, are not at an increased risk of mesothelioma. Several inhalation toxicology studies clearly differentiated that short chrysotile and amphibole asbestos fibers did not produce a significant carcinogenic effect in the lung or pleural cavity. Because of dosing and lack of sensitivity to biosolubility, in vitro studies can be difficult to interpret; however, a number have differentiated short chrysotile and amphibole asbestos fibers from long fibers. Integral to understanding the importance of fiber length in determining possible health effects is an understanding of the biological and physiological function of the respiratory system. Short asbestos fibers, like innocuous dust, can be cleared through the tracheobronchial ciliated mucous transport, phagocytized by macrophages and cleared via the bronchial tree, and can also be removed through the lymphatic system. While the first two methods can remove them from the lung, with lymphatic transport through one-way valves, fibers are removed from the active area of the lung where the fiber-related disease has been shown to develop and can accumulate in lymphatic sumps and lymph nodes. While short asbestos fibers are present in most occupational or environmental exposures, the large body of studies strongly supports that they do not contribute to the health effects of asbestos exposure.